summaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2015-03-13ARM: at91/dt: introduce atmel,<chip>-dbguAlexandre Belloni11-11/+12
The DBGU is not a simple UART and we need to be able to distinguish it from the other UARTs, in particular to get its address and check the chip id. Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2015-03-13ARM: at91: remove unused _matrix.h headersAlexandre Belloni7-628/+0
The matrix headers are not used anymore, remove them. Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2015-03-13ARM: at91: remove unused at91_ioremap_matrix and headerAlexandre Belloni3-37/+0
at91_ioremap_matrix and the at91_matrix.h header are not used anymore, remove them. Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2015-03-13ARM: at91: remove NEED_MACH_IO_HArnd Bergmann5-34/+9
The mach/io.h header on at91 is used to support a nonstandard I/O space window for the cf card driver. This changes the driver to use pci_ioremap_io in order to have the standard location, and then removes the custom mach/io.h. [alexandre.belloni@free-electrons.com: Added PCI dependency] Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2015-03-13ARM: at91/pm: flush data cache and clean, invalidate and disable the L2 cacheWenyou Yang1-0/+6
Flush data cache, and clean, invalidate and disable the L2 cache before going to suspend. Restore the L2 cache configuration and re-enable the L2 cache after waking up. Signed-off-by: Wenyou Yang <wenyou.yang@atmel.com> Acked-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Tested-by: Sylvain Rochet <sylvain.rochet@finsecur.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2015-03-13ARM: at91/pm_suspend: add the WFI instruction support for ARMv7Wenyou Yang1-1/+19
Add the WFI instruction to make the cpu to the idle state. In the meanwhile, disable the processor's clock. Signed-off-by: Wenyou Yang <wenyou.yang@atmel.com> Acked-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Tested-by: Sylvain Rochet <sylvain.rochet@finsecur.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2015-03-13ARM: at91/pm: remove unused void (*at91_pm_standby)(void)Wenyou Yang1-4/+1
Because the standby mode use the same sram function as the suspend to memory mode, void (*at91_pm_standby)(void) doesn't need, remove it. Signed-off-by: Wenyou Yang <wenyou.yang@atmel.com> Tested-by: Sylvain Rochet <sylvain.rochet@finsecur.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2015-03-13ARM: at91/pm: rename function name: at91_slow_clock() --> ↵Wenyou Yang2-28/+25
at91_pm_suspend_sram_fn() As the file name is renamed, rename the function name at91_slow_clock() --> at91_pm_suspend_sram_fn(), rename the function handler's name at the same time. Signed-off-by: Wenyou Yang <wenyou.yang@atmel.com> Acked-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Tested-by: Sylvain Rochet <sylvain.rochet@finsecur.com> [nicolas.ferre@atmel.com: little update of the commit message] Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2015-03-13ARM: at91/pm: rename file name: pm_slowclock.S --> pm_suspend.SWenyou Yang2-1/+1
Because the sram function is used for both suspend to memory and the suspend to standby mode, renaming is more elegant. Signed-off-by: Wenyou Yang <wenyou.yang@atmel.com> Acked-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Tested-by: Sylvain Rochet <sylvain.rochet@finsecur.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2015-03-13ARM: at91/pm: standby mode uses same sram function as suspend to memory modeWenyou Yang3-47/+73
To simply the PM code, the suspend to standby mode uses same sram function as the suspend to memory mode, running in the internal SRAM, instead of the respective code for each mode. For the suspend to standby mode, the master clock doesn't switch to the slow clock, and PLLA and the main oscillator doesn't turn off as well. Signed-off-by: Wenyou Yang <wenyou.yang@atmel.com> Tested-by: Sylvain Rochet <sylvain.rochet@finsecur.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2015-03-13ARM: at91/pm: move the copying the sram function to the sram initialization ↵Wenyou Yang1-4/+12
phase To decrease the suspend time, move copying the sram function to the sram initialization phase, instead of every time go to suspend. In the meanwhile, substitute fncpy() for memcpy(). If there is no sram allocated for PM, the PM is not supported. Signed-off-by: Wenyou Yang <wenyou.yang@atmel.com> Acked-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Tested-by: Sylvain Rochet <sylvain.rochet@finsecur.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2015-03-13ARM: at91/pm_slowclock: create the procedure to handle the sdram self-refreshWenyou Yang1-105/+139
To decrease the duplicated code, create the procedure to contain both activing and exiting the sdram self-refresh mode. Signed-off-by: Wenyou Yang <wenyou.yang@atmel.com> Tested-by: Sylvain Rochet <sylvain.rochet@finsecur.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2015-03-13ARM: at91/pm_slowclock: remove clocks which are already stopped when ↵Sylvain Rochet1-31/+0
entering slow clock mode Assume USB PLL and PLL B are already stopped before entering sleep mode. Removed PLL B from slow clock code, all drivers are supposed to properly unprepare clocks. Signed-off-by: Sylvain Rochet <sylvain.rochet@finsecur.com> Acked-by: Wenyou.Yang <wenyou.yang@atmel.com> [nicolas.ferre@atmel.com: remove the warning printed in pm.c] Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2015-03-13ARM: at91/pm: remove CONFIG_AT91_SLOW_CLOCK config optionWenyou Yang3-25/+2
The slow clock always exists, selecting CONFIG_AT91_SLOW_CLOCK config is unnecessary for the suspend to memory mode. For this mode the master clock should always switch to the slow clock. Signed-off-by: Wenyou Yang <wenyou.yang@atmel.com> Acked-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Tested-by: Sylvain Rochet <sylvain.rochet@finsecur.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2015-03-13ARM: at91: move "select SRAM" under SOC_AT91SAM9 and SOC_SAMA5Wenyou Yang1-1/+3
To simply the PM config the CONFIG_AT91_SLOW_CLOCK option will be removed, so move "select SRAM" from under AT91_SLOW_CLOCK, add "select SRAM if PM" under SOC_AT91SAM9 and SOC_SAMA5 Signed-off-by: Wenyou Yang <wenyou.yang@atmel.com> Acked-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Tested-by: Sylvain Rochet <sylvain.rochet@finsecur.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2015-03-13ARM: at91/pm_slowclock: remove the unused code related with ↵Wenyou Yang1-37/+0
SLOWDOWN_MASTER_CLOCK The SLOWDOWN_MASTER_CLOCK definition is not used, remove the redundant code. Signed-off-by: Wenyou Yang <wenyou.yang@atmel.com> Acked-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Tested-by: Sylvain Rochet <sylvain.rochet@finsecur.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2015-03-12ARM: at91: pm: change at91_pm_set_standby() to staticWenyou Yang2-7/+1
Since at91_pm_set_standby() will not be used out of the pm.c file, change its attribute from extern to static, remove its declaration as well. Signed-off-by: Wenyou Yang <wenyou.yang@atmel.com> Acked-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2015-03-12ARM: at91: remove ksz8081 phy fixup registration for sama5d4ek boardBoris Brezillon2-21/+0
Commit 2b0ba96cea60 ("net: phy: micrel: disable NAND-tree for KSZ8021, KSZ8031, KSZ8051, KSZ8081") automated the NAND-tree mode deactivation process, thus making this phy fixup useless. Remove it along with the associated headers inclusion. Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com> Acked-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> [nicolas.ferre@atmel.com: remove selection of PHYLIB in at91 Kconfig] Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2015-03-12Merge tag 'at91-fixes3' into at91-4.1-cleanupNicolas Ferre8-11/+14
Third fixes batch for AT91 on 4.0: - clock fixes for USB - compatible string changes for handling USB IP differences (+ needed AHB matrix syscon) - fix of a compilation error in PM code
2015-03-12Merge tag 'at91-fixes2' into at91-4.1-cleanupNicolas Ferre3-4/+9
Second fixes batch for AT91 on 4.0: - little fix for !MMU debug: may also help for randconfig - fix of 2 errors in LCD clock definitions - in PM code, not writing the key leads to not execute the action
2015-03-12Merge tag 'at91-fixes' into at91-4.1-cleanupNicolas Ferre14-59/+64
First fixes batch for AT91 on 4.0: - PM slowclock fixes for DDR and timeouts - fix some DT entries - little defconfig updates - the removal of a harmful watchdog option + its detailed documentation
2015-03-11ARM: at91: pm_slowclock: fix the compilation errorWenyou Yang1-0/+2
When compiling the kernel in thumb2 (CONFIG_THUMB2_KERNEL option activated), we hit a compilation crash. The error message is listed below: ---8< ----- Error: cannot use register index with PC-relative addressing -- `str r0,.saved_lpr' --->8---- Add the .arm directive in the assembly files related to power management. Signed-off-by: Wenyou Yang <wenyou.yang@atmel.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2015-03-11ARM: at91/dt: fix USB high-speed clock to select UTMINicolas Ferre4-5/+5
The UTMI clock must be selected by any high-speed USB IP. The logic behind it needs this particular clock. So, correct the clock in the device tree files affected. Reported-by: Bo Shen <voice.shen@atmel.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Cc: <stable@vger.kernel.org> #3.18
2015-03-11ARM: at91/dt: fix at91 udc compatible stringsBoris Brezillon3-3/+4
The at91rm9200, at91sam9260, at91sam9261 and at91sam9263 SoCs have slightly different UDC IPs. Those differences were previously handled with cpu_is_at91xx macro which are about to be dropped for multi-platform support, thus we need to change compatible strings. Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2015-03-11ARM: at91/dt: declare matrix node as a syscon deviceBoris Brezillon1-1/+1
There is no specific driver handling the AHB matrix, this is a simple syscon device. the matrix is needed by several other drivers including the USB on some SoCs (at91sam9261 for instance). Without this definition, the USB will not work on these SoCs. Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2015-03-09ARM: at91/dt: at91sam9261: fix clocks and clock-names in udc definitionBoris Brezillon1-2/+2
Peripheral clock is named pclk and system clock is named hclk (those are the names expected by the at91_udc driver). Drop the deprecated usb_clk (formerly used to configure the usb clock rate which is now directly configurable through hclk). Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2015-03-05ARM: at91/pm: MOR register KEY was missingPatrice Vilchez1-0/+2
Because writing the MOR register requires the PASSWD(0x37), if missed, the write operation will be aborted. Signed-off-by: Patrice Vilchez <patrice.vilchez@atmel.com> Acked-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2015-03-05ARM: at91/dt: sama5d4: fix lcdck clock definitionBoris BREZILLON1-2/+2
lcdck takes mck (not smd) as its parent. It is also assigned id 3 and not 4. Signed-off-by: Boris BREZILLON <boris.brezillon@free-electrons.com> [nicolas.ferre@atmel.com: squashed 2 related patches] Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2015-03-05ARM: at91/dt: sama5d4: rename lcd_clk into lcdc_clkBoris BREZILLON1-1/+1
Rename lcd_clk into lcdc_clk to be consistent with sama5d3 clock definitions. Signed-off-by: Boris BREZILLON <boris.brezillon@free-electrons.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2015-03-05ARM: at91: debug: fix non MMU debugAlexandre Belloni1-1/+4
Linux may be used without MMU on atmel SoCs, fix debug in this configuration. Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2015-03-04ARM: at91/dt: keep watchdog running in idle modeMichel Marti6-6/+0
Since turning on idle-halt in commit fe46aa679f12 (ARM: at91/dt: add sam9 watchdog default options to SoCs), SoCs compatible with at91sam9260-wdt no longer reboot if the watchdog times out while the CPU is in idle state. Removing the 'idle-halt' flag that was set by default fixes this. Signed-off-by: Michel Marti <mma@objectxp.com> Acked-by: Boris Brezillon <boris.brezillon@free-electrons.com> Acked-by: Sylvain Rochet <sylvain.rochet@finsecur.com> [nicolas.ferre@atmel.com: rework the commit message] Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2015-03-04dts: Documentation: AT91 Watchdog, explain what atmel,idle-halt property ↵Sylvain Rochet1-0/+5
really do atmel,idle-halt property should be used with care, it actually makes the watchdog not counting when the CPU is in idle state, therefore the watchdog reset time depends on mean CPU usage and will not reset at all of the CPU stop working while it is in idle state, which is probably not what you want. Signed-off-by: Sylvain Rochet <sylvain.rochet@finsecur.com> Acked-by: Boris Brezillon <boris.brezillon@free-electrons.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2015-03-04ARM: at91/defconfig: add at91rm9200 ethernet supportAlexandre Belloni1-0/+1
There is now only one defconfig for the at91rm9200 and at91sam9. Add ethernet support for the at91rm9200. Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2015-03-04ARM: at91/defconfig: remove CONFIG_SYSFS_DEPRECATEDAnthony Harivel1-2/+0
Recent distributions and userspace tools after 2009/2010 depend on the existence of /sys/class/block/, and will not work with this option enabled. Signed-off-by: Anthony Harivel <anthony.harivel@emtrion.de> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2015-03-04ARM: at91/dt: at91sam9260: fix usart pinctrlJonas Andersson1-2/+2
Corrected pins used by usart3. Signed-off-by: Jonas Andersson <jonas@microbit.se> Acked-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2015-03-03ARM: at91/dt: sama5d4: add missing alias for i2c0Nicolas Ferre1-0/+1
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2015-03-03ARM: at91/dt: at91sam9263: Fixup sram1 device tree nodeAlexander Stein1-1/+1
Commit ff04660e48b20 ("ARM: at91/dt: add SRAM nodes") used the same base address for sram0 and sram1 leading to the following warning: WARNING: CPU: 0 PID: 1 at fs/sysfs/dir.c:31 sysfs_warn_dup+0x50/0x70() sysfs: cannot create duplicate filename '/devices/platform/300000.sram' Fix the base address for sram1. Signed-off-by: Alexander Stein <alexanders83@web.de> Acked-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2015-03-03ARM: at91: pm: fix SRAM allocationAlexandre Belloni1-12/+10
On some platforms, there are multiple SRAM nodes defined in the device tree but some of them are disabled, leading to allocation failure. Try to find the first enabled SRAM node and allocate from it. Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Tested-by: Wenyou Yang <wenyou.yang@atmel.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2015-03-03ARM: at91: pm: fix at91rm9200 standbyAlexandre Belloni1-1/+1
at91rm9200 standby and suspend to ram has been broken since 00482a4078f4. It is wrongly using AT91_BASE_SYS which is a physical address and actually doesn't correspond to any register on at91rm9200. Use the correct at91_ramc_base[0] instead. Fixes: 00482a4078f4 (ARM: at91: implement the standby function for pm/cpuidle) Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2015-03-03pm: at91: Workaround DDRSDRC self-refresh bug with LPDDR1 memories.Peter Rosin2-6/+39
The DDRSDR controller fails miserably to put LPDDR1 memories in self-refresh. Force the controller to think it has DDR2 memories during the self-refresh period, as the DDR2 self-refresh spec is equivalent to LPDDR1, and is correctly implemented in the controller. Assume that the second controller has the same fault, but that is untested. Signed-off-by: Peter Rosin <peda@axentia.se> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2015-03-03pm: at91: pm_slowclock: fix suspend/resume hang up in timeoutsSylvain Rochet1-29/+4
Removed timeout on XTAL, PLL lock and Master Clock Ready, hang if something went wrong instead of continuing in unknown condition. There is not much we can do if a PLL lock never ends, we are running in SRAM and we will not be able to connect back the sdram or ddram in order to be able to fire up a message or just panic. As a bonus, not decounting the timeout register in slow clock mode reduce cumulated suspend time and resume time from ~17ms to ~15ms. Signed-off-by: Sylvain Rochet <sylvain.rochet@finsecur.com> Acked-by: Wenyou.Yang <wenyou.yang@atmel.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2015-03-03Linux 4.0-rc2v4.0-rc2Linus Torvalds1-1/+1
2015-03-03drm/i915: Fix modeset state confusion in the load detect codeDaniel Vetter1-0/+1
This is a tricky story of the new atomic state handling and the legacy code fighting over each another. The bug at hand is an underrun of the framebuffer reference with subsequent hilarity caused by the load detect code. Which is peculiar since the the exact same code works fine as the implementation of the legacy setcrtc ioctl. Let's look at the ingredients: - Currently our code is a crazy mix of legacy modeset interfaces to set the parameters and half-baked atomic state tracking underneath. While this transition is going we're using the transitional plane helpers to update the atomic side (drm_plane_helper_disable/update and friends), i.e. plane->state->fb. Since the state structure owns the fb those functions take care of that themselves. The legacy state (specifically crtc->primary->fb) is still managed by the old code (and mostly by the drm core), with the fb reference counting done by callers (core drm for the ioctl or the i915 load detect code). The relevant commit is commit ea2c67bb4affa84080c616920f3899f123786e56 Author: Matt Roper <matthew.d.roper@intel.com> Date: Tue Dec 23 10:41:52 2014 -0800 drm/i915: Move to atomic plane helpers (v9) - drm_plane_helper_disable has special code to handle multiple calls in a row - it checks plane->crtc == NULL and bails out. This is to match the proper atomic implementation which needs the crtc to get at the implied locking context atomic updates always need. See commit acf24a395c5a9290189b080383564437101d411c Author: Daniel Vetter <daniel.vetter@ffwll.ch> Date: Tue Jul 29 15:33:05 2014 +0200 drm/plane-helper: transitional atomic plane helpers - The universal plane code split out the implicit primary plane from the CRTC into it's own full-blown drm_plane object. As part of that the setcrtc ioctl (which updated both the crtc mode and primary plane) learned to set crtc->primary->crtc on modeset to make sure the plane->crtc assignments statate up to date in commit e13161af80c185ecd8dc4641d0f5df58f9e3e0af Author: Matt Roper <matthew.d.roper@intel.com> Date: Tue Apr 1 15:22:38 2014 -0700 drm: Add drm_crtc_init_with_planes() (v2) Unfortunately we've forgotten to update the load detect code. Which wasn't a problem since the load detect modeset is temporary and always undone before we drop the locks. - Finally there is a organically grown history (i.e. don't ask) around who sets the legacy plane->fb for the various driver entry points. Originally updating that was the drivers duty, but for almost all places we've moved that (plus updating the refcounts) into the core. Again the exception is the load detect code. Taking all together the following happens: - The load detect code doesn't set crtc->primary->crtc. This is only really an issue on crtcs never before used or when userspace explicitly disabled the primary plane. - The plane helper glue code short-circuits because of that and leaves a non-NULL fb behind in plane->state->fb and plane->fb. The state fb isn't a real problem (it's properly refcounted on its own), it's just the canary. - Load detect code drops the reference for that fb, but doesn't set plane->fb = NULL. This is ok since it's still living in that old world where drivers had to clear the pointer but the core/callers handled the refcounting. - On the next modeset the drm core notices plane->fb and takes care of refcounting it properly by doing another unref. This drops the refcount to zero, leaving state->plane now pointing at freed memory. - intel_plane_duplicate_state still assume it owns a reference to that very state->fb and bad things start to happen. Fix this all by applying the same duct-tape as for the legacy setcrtc ioctl code and set crtc->primary->crtc properly. Cc: Matt Roper <matthew.d.roper@intel.com> Cc: Paul Bolle <pebolle@tiscali.nl> Cc: Rob Clark <robdclark@gmail.com> Cc: Paulo Zanoni <przanoni@gmail.com> Cc: Sean Paul <seanpaul@chromium.org> Cc: Matt Roper <matthew.d.roper@intel.com> Reported-and-tested-by: Linus Torvalds <torvalds@linux-foundation.org> Reported-by: Paul Bolle <pebolle@tiscali.nl> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-03-03Merge tag 'gpio-v4.0-2' of ↵Linus Torvalds2-8/+15
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio Pull GPIO fixes from Linus Walleij: "Two GPIO fixes: - Fix a translation problem in of_get_named_gpiod_flags() - Fix a long standing container_of() mistake in the TPS65912 driver" * tag 'gpio-v4.0-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: gpio: tps65912: fix wrong container_of arguments gpiolib: of: allow of_gpiochip_find_and_xlate to find more than one chip per node
2015-03-03Merge branch 'fixes-for-4.0-rc2' of ↵Linus Torvalds12-67/+145
git://git.kernel.org/pub/scm/linux/kernel/git/evalenti/linux-soc-thermal Pull thermal management fixes from Eduardo Valentin: "Specifics: - Several fixes in tmon tool. - Fixes in intel int340x for _ART and _TRT tables. - Add id for Avoton SoC into powerclamp driver. - Fixes in RCAR thermal driver to remove race conditions and fix fail path - Fixes in TI thermal driver: removal of unnecessary code and build fix if !CONFIG_PM_SLEEP - Cleanups in exynos thermal driver - Add stubs for include/linux/thermal.h. Now drivers using thermal calls but that also work without CONFIG_THERMAL will be able to compile for systems that don't care about thermal. Note: I am sending this pull on Rui's behalf while he fixes issues in his Linux box" * 'fixes-for-4.0-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/evalenti/linux-soc-thermal: thermal: int340x_thermal: Ignore missing _ART, _TRT tables thermal/intel_powerclamp: add id for Avoton SoC tools/thermal: tmon: silence 'set but not used' warnings tools/thermal: tmon: use pkg-config to determine library dependencies tools/thermal: tmon: support cross-compiling tools/thermal: tmon: add .gitignore tools/thermal: tmon: fixup tui windowing calculations tools/thermal: tmon: tui: don't hard-code dialog window size assumptions tools/thermal: tmon: add min/max macros tools/thermal: tmon: add --target-temp parameter thermal: exynos: Clean-up code to use oneline entry for exynos compatible table thermal: rcar: Make error and remove paths symmetrical with init thermal: rcar: Fix race condition between init and interrupt thermal: Introduce dummy functions when thermal is not defined ti-soc-thermal: Delete an unnecessary check before the function call "cpufreq_cooling_unregister" thermal: ti-soc-thermal: bandgap: Fix build warning if !CONFIG_PM_SLEEP
2015-03-03Merge tag 'md/4.0-fixes' of git://neil.brown.name/mdLinus Torvalds3-12/+20
Pull md fixes from Neil Brown: "Three md fixes: - fix a read-balance problem that was reported 2 years ago, but that I never noticed the report :-( - fix for rare RAID6 problem causing incorrect bitmap updates when two devices fail. - add __ATTR_PREALLOC annotation now that it is possible" * tag 'md/4.0-fixes' of git://neil.brown.name/md: md: mark some attributes as pre-alloc raid5: check faulty flag for array status during recovery. md/raid1: fix read balance when a drive is write-mostly.
2015-03-03Merge tag 'metag-fixes-v4.0-1' of ↵Linus Torvalds1-2/+2
git://git.kernel.org/pub/scm/linux/kernel/git/jhogan/metag Pull arch/metag fix from James Hogan: "This is just a single patch to fix the KSTK_EIP() and KSTK_ESP() macros for metag which have always been erronously returning the PC and stack pointer of the task's kernel context rather than from its user context saved at entry from userland into the kernel, which affects the contents of /proc/<pid>/maps and /proc/<pid>/stat" * tag 'metag-fixes-v4.0-1' of git://git.kernel.org/pub/scm/linux/kernel/git/jhogan/metag: metag: Fix KSTK_EIP() and KSTK_ESP() macros
2015-03-01Merge branch 'x86-urgent-for-linus' of ↵Linus Torvalds3-3/+9
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 fixes from Ingo Molnar: "A CR4-shadow 32-bit init fix, plus two typo fixes" * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86: Init per-cpu shadow copy of CR4 on 32-bit CPUs too x86/platform/intel-mid: Fix trivial printk message typo in intel_mid_arch_setup() x86/cpu/intel: Fix trivial typo in intel_tlb_table[]
2015-03-01Merge branch 'timers-urgent-for-linus' of ↵Linus Torvalds4-16/+13
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull timer fixes from Ingo Molnar: "Three clockevents/clocksource driver fixes" * 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: clocksource: pxa: Fix section mismatch clocksource: mtk: Fix race conditions in probe code clockevents: asm9260: Fix compilation error with sparc/sparc64 allyesconfig
2015-03-01Merge branch 'perf-urgent-for-linus' of ↵Linus Torvalds9-22/+72
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull perf fixes from Ingo Molnar: "Two kprobes fixes and a handful of tooling fixes" * 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: perf tools: Make sparc64 arch point to sparc perf symbols: Define EM_AARCH64 for older OSes perf top: Fix SIGBUS on sparc64 perf tools: Fix probing for PERF_FLAG_FD_CLOEXEC flag perf tools: Fix pthread_attr_setaffinity_np build error perf tools: Define _GNU_SOURCE on pthread_attr_setaffinity_np feature check perf bench: Fix order of arguments to memcpy_alloc_mem kprobes/x86: Check for invalid ftrace location in __recover_probed_insn() kprobes/x86: Use 5-byte NOP when the code might be modified by ftrace
generated by cgit v1.2.3 (git 2.39.0) at 2024-09-21 22:44:06 +0300