summaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2021-07-25net: ipv6: fix return value of ip6_skb_dst_mtuVadim Fedorenko2-2/+2
commit 40fc3054b45820c28ea3c65e2c86d041dc244a8a upstream. Commit 628a5c561890 ("[INET]: Add IP(V6)_PMTUDISC_RPOBE") introduced ip6_skb_dst_mtu with return value of signed int which is inconsistent with actually returned values. Also 2 users of this function actually assign its value to unsigned int variable and only __xfrm6_output assigns result of this function to signed variable but actually uses as unsigned in further comparisons and calls. Change this function to return unsigned int value. Fixes: 628a5c561890 ("[INET]: Add IP(V6)_PMTUDISC_RPOBE") Reviewed-by: David Ahern <dsahern@kernel.org> Signed-off-by: Vadim Fedorenko <vfedorenko@novek.ru> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-07-25net: dsa: mv88e6xxx: enable .rmu_disable() on TopazMarek Behún1-0/+2
commit 3709488790022c85720f991bff50d48ed5a36e6a upstream. Commit 9e5baf9b36367 ("net: dsa: mv88e6xxx: add RMU disable op") introduced .rmu_disable() method with implementation for several models, but forgot to add Topaz, which can use the Peridot implementation. Use the Peridot implementation of .rmu_disable() on Topaz. Signed-off-by: Marek Behún <kabel@kernel.org> Fixes: 9e5baf9b36367 ("net: dsa: mv88e6xxx: add RMU disable op") Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-07-25net: dsa: mv88e6xxx: enable .port_set_policy() on TopazMarek Behún1-0/+2
commit 7da467d82d1ed4fb317aff836f99709169e73f10 upstream. Commit f3a2cd326e44 ("net: dsa: mv88e6xxx: introduce .port_set_policy") introduced .port_set_policy() method with implementation for several models, but forgot to add Topaz, which can use the 6352 implementation. Use the 6352 implementation of .port_set_policy() on Topaz. Signed-off-by: Marek Behún <kabel@kernel.org> Fixes: f3a2cd326e44 ("net: dsa: mv88e6xxx: introduce .port_set_policy") Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-07-25dm writecache: return the exact table values that were setMikulas Patocka1-16/+16
commit 054bee16163df023e2589db09fd27d81f7ad9e72 upstream. LVM doesn't like it when the target returns different values from what was set in the constructor. Fix dm-writecache so that the returned table values are exactly the same as requested values. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Cc: stable@vger.kernel.org # v4.18+ Signed-off-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-07-25mm: slab: fix kmem_cache_create failed when sysfs node not destroyedNanyong Sun1-8/+10
The commit d38a2b7a9c93 ("mm: memcg/slab: fix memory leak at non-root kmem_cache destroy") introduced a problem: If one thread destroy a kmem_cache A and another thread concurrently create a kmem_cache B, which is mergeable with A and has same size with A, the B may fail to create due to the duplicate sysfs node. The scenario in detail: 1) Thread 1 uses kmem_cache_destroy() to destroy kmem_cache A which is mergeable, it decreases A's refcount and if refcount is 0, then call memcg_set_kmem_cache_dying() which set A->memcg_params.dying = true, then unlock the slab_mutex and call flush_memcg_workqueue(), it may cost a while. Note: now the sysfs node(like '/kernel/slab/:0000248') of A is still present, it will be deleted in shutdown_cache() which will be called after flush_memcg_workqueue() is done and lock the slab_mutex again. 2) Now if thread 2 is coming, it use kmem_cache_create() to create B, which is mergeable with A(their size is same), it gain the lock of slab_mutex, then call __kmem_cache_alias() trying to find a mergeable node, because of the below added code in commit d38a2b7a9c93 ("mm: memcg/slab: fix memory leak at non-root kmem_cache destroy"), B is not mergeable with A whose memcg_params.dying is true. int slab_unmergeable(struct kmem_cache *s) if (s->refcount < 0) return 1; /* * Skip the dying kmem_cache. */ if (s->memcg_params.dying) return 1; return 0; } So B has to create its own sysfs node by calling: create_cache-> __kmem_cache_create-> sysfs_slab_add-> kobject_init_and_add Because B is mergeable itself, its filename of sysfs node is based on its size, like '/kernel/slab/:0000248', which is duplicate with A, and the sysfs node of A is still present now, so kobject_init_and_add() will return fail and result in kmem_cache_create() fail. Concurrently modprobe and rmmod the two modules below can reproduce the issue quickly: nf_conntrack_expect, se_sess_cache. See call trace in the end. LTS versions of v4.19.y and v5.4.y have this problem, whereas linux versions after v5.9 do not have this problem because the patchset: ("The new cgroup slab memory controller") almost refactored memcg slab. A potential solution(this patch belongs): Just let the dying kmem_cache be mergeable, the slab_mutex lock can prevent the race between alias kmem_cache creating thread and root kmem_cache destroying thread. In the destroying thread, after flush_memcg_workqueue() is done, judge the refcount again, if someone reference it again during un-lock time, we don't need to destroy the kmem_cache completely, we can reuse it. Another potential solution: revert the commit d38a2b7a9c93 ("mm: memcg/slab: fix memory leak at non-root kmem_cache destroy"), compare to the fail of kmem_cache_create, the memory leak in special scenario seems less harmful. Call trace: sysfs: cannot create duplicate filename '/kernel/slab/:0000248' Hardware name: QEMU KVM Virtual Machine, BIOS 0.0.0 02/06/2015 Call trace: dump_backtrace+0x0/0x198 show_stack+0x24/0x30 dump_stack+0xb0/0x100 sysfs_warn_dup+0x6c/0x88 sysfs_create_dir_ns+0x104/0x120 kobject_add_internal+0xd0/0x378 kobject_init_and_add+0x90/0xd8 sysfs_slab_add+0x16c/0x2d0 __kmem_cache_create+0x16c/0x1d8 create_cache+0xbc/0x1f8 kmem_cache_create_usercopy+0x1a0/0x230 kmem_cache_create+0x50/0x68 init_se_kmem_caches+0x38/0x258 [target_core_mod] target_core_init_configfs+0x8c/0x390 [target_core_mod] do_one_initcall+0x54/0x230 do_init_module+0x64/0x1ec load_module+0x150c/0x16f0 __se_sys_finit_module+0xf0/0x108 __arm64_sys_finit_module+0x24/0x30 el0_svc_common+0x80/0x1c0 el0_svc_handler+0x78/0xe0 el0_svc+0x10/0x260 kobject_add_internal failed for :0000248 with -EEXIST, don't try to register things with the same name in the same directory. kmem_cache_create(se_sess_cache) failed with error -17 Hardware name: QEMU KVM Virtual Machine, BIOS 0.0.0 02/06/2015 Call trace: dump_backtrace+0x0/0x198 show_stack+0x24/0x30 dump_stack+0xb0/0x100 kmem_cache_create_usercopy+0xa8/0x230 kmem_cache_create+0x50/0x68 init_se_kmem_caches+0x38/0x258 [target_core_mod] target_core_init_configfs+0x8c/0x390 [target_core_mod] do_one_initcall+0x54/0x230 do_init_module+0x64/0x1ec load_module+0x150c/0x16f0 __se_sys_finit_module+0xf0/0x108 __arm64_sys_finit_module+0x24/0x30 el0_svc_common+0x80/0x1c0 el0_svc_handler+0x78/0xe0 el0_svc+0x10/0x260 Fixes: d38a2b7a9c93 ("mm: memcg/slab: fix memory leak at non-root kmem_cache destroy") Signed-off-by: Nanyong Sun <sunnanyong@huawei.com> Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-07-25usb: cdns3: Enable TDL_CHK only for OUT epSanket Parmar1-5/+3
commit d6eef886903c4bb5af41b9a31d4ba11dc7a6f8e8 upstream. ZLP gets stuck if TDL_CHK bit is set and TDL_FROM_TRB is used as TDL source for IN endpoints. To fix it, TDL_CHK is only enabled for OUT endpoints. Fixes: 7733f6c32e36 ("usb: cdns3: Add Cadence USB3 DRD Driver") Reported-by: Aswath Govindraju <a-govindraju@ti.com> Signed-off-by: Sanket Parmar <sparmar@cadence.com> Link: https://lore.kernel.org/r/1621263912-13175-1-git-send-email-sparmar@cadence.com Signed-off-by: Peter Chen <peter.chen@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-07-25f2fs: Show casefolding support only when supportedDaniel Rosenberg1-0/+4
commit 39307f8ee3539478c28e71b4909b5b028cce14b1 upstream. The casefolding feature is only supported when CONFIG_UNICODE is set. This modifies the feature list f2fs presents under sysfs accordingly. Fixes: 5aba54302a46 ("f2fs: include charset encoding information in the superblock") Cc: stable@vger.kernel.org # v5.4+ Signed-off-by: Daniel Rosenberg <drosen@google.com> Reviewed-by: Eric Biggers <ebiggers@google.com> Reviewed-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-07-25arm64: dts: marvell: armada-37xx: move firmware node to generic dtsi filePali Rohár2-4/+10
[ Upstream commit 3a52a48973b355b3aac5add92ef50650ae37c2bd ] Move the turris-mox-rwtm firmware node from Turris MOX' device tree into the generic armada-37xx.dtsi file and use the generic compatible string 'marvell,armada-3700-rwtm-firmware' instead of the current one. Turris MOX DTS file contains also old compatible string for backward compatibility. The Turris MOX rWTM firmware can be used on any Armada 37xx device, giving them access to the rWTM hardware random number generator, which is otherwise unavailable. This change allows Linux to load the turris-mox-rwtm.ko module on these boards. Tested on ESPRESSObin v5 with both default Marvell WTMI firmware and CZ.NIC's firmware. With default WTMI firmware the turris-mox-rwtm fails to probe, while with CZ.NIC's firmware it registers the HW random number generator. Signed-off-by: Pali Rohár <pali@kernel.org> Signed-off-by: Marek Behún <kabel@kernel.org> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-07-25firmware: turris-mox-rwtm: add marvell,armada-3700-rwtm-firmware compatible ↵Pali Rohár1-0/+1
string [ Upstream commit 90ae47215de3fec862aeb1a0f0e28bb505ab1351 ] Add more generic compatible string 'marvell,armada-3700-rwtm-firmware' for this driver, since it can also be used on other Armada 3720 devices. Current compatible string 'cznic,turris-mox-rwtm' is kept for backward compatibility. Signed-off-by: Pali Rohár <pali@kernel.org> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-07-25arm64: dts: armada-3720-turris-mox: add firmware nodeMarek Behún1-0/+8
[ Upstream commit 46d2f6d0c99f7f95600e633c7dc727745faaf95e ] Add the node representing the firmware running on the secure processor. Signed-off-by: Marek Behún <marek.behun@nic.cz> Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-07-25cifs: prevent NULL deref in cifs_compose_mount_options()Paulo Alcantara1-0/+3
[ Upstream commit 03313d1c3a2f086bb60920607ab79ac8f8578306 ] The optional @ref parameter might contain an NULL node_name, so prevent dereferencing it in cifs_compose_mount_options(). Addresses-Coverity: 1476408 ("Explicit null dereferenced") Signed-off-by: Paulo Alcantara (SUSE) <pc@cjr.nz> Signed-off-by: Steve French <stfrench@microsoft.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-07-25s390: introduce proper type handling call_on_stack() macroHeiko Carstens1-0/+97
[ Upstream commit 41d71fe59cce41237f24f3b7bdc1b414069a34ed ] The existing CALL_ON_STACK() macro allows for subtle bugs: - There is no type checking of the function that is being called. That is: missing or too many arguments do not cause any compile error or warning. The same is true if the return type of the called function changes. This can lead to quite random bugs. - Sign and zero extension of arguments is missing. Given that the s390 C ABI requires that the caller of a function performs proper sign and zero extension this can also lead to subtle bugs. - If arguments to the CALL_ON_STACK() macros contain functions calls register corruption can happen due to register asm constructs being used. Therefore introduce a new call_on_stack() macro which is supposed to fix all these problems. Reviewed-by: Sven Schnelle <svens@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-07-25sched/fair: Fix CFS bandwidth hrtimer expiry typeOdin Ugedal1-2/+2
[ Upstream commit 72d0ad7cb5bad265adb2014dbe46c4ccb11afaba ] The time remaining until expiry of the refresh_timer can be negative. Casting the type to an unsigned 64-bit value will cause integer underflow, making the runtime_refresh_within return false instead of true. These situations are rare, but they do happen. This does not cause user-facing issues or errors; other than possibly unthrottling cfs_rq's using runtime from the previous period(s), making the CFS bandwidth enforcement less strict in those (special) situations. Signed-off-by: Odin Ugedal <odin@uged.al> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Reviewed-by: Ben Segall <bsegall@google.com> Link: https://lore.kernel.org/r/20210629121452.18429-1-odin@uged.al Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-07-25scsi: qedf: Add check to synchronize abort and flushJaved Hasan1-1/+21
[ Upstream commit df99446d5c2a63dc6e6920c8090da0e9da6539d5 ] A race condition was observed between qedf_cleanup_fcport() and qedf_process_error_detect()->qedf_initiate_abts(): [2069091.203145] BUG: unable to handle kernel NULL pointer dereference at 0000000000000030 [2069091.213100] IP: [<ffffffffc0666cc6>] qedf_process_error_detect+0x96/0x130 [qedf] [2069091.223391] PGD 1943049067 PUD 194304e067 PMD 0 [2069091.233420] Oops: 0000 [#1] SMP [2069091.361820] CPU: 1 PID: 14751 Comm: kworker/1:46 Kdump: loaded Tainted: P OE ------------ 3.10.0-1160.25.1.el7.x86_64 #1 [2069091.388474] Hardware name: HPE Synergy 480 Gen10/Synergy 480 Gen10 Compute Module, BIOS I42 04/08/2020 [2069091.402148] Workqueue: qedf_io_wq qedf_fp_io_handler [qedf] [2069091.415780] task: ffff9bb9f5190000 ti: ffff9bacaef9c000 task.ti: ffff9bacaef9c000 [2069091.429590] RIP: 0010:[<ffffffffc0666cc6>] [<ffffffffc0666cc6>] qedf_process_error_detect+0x96/0x130 [qedf] [2069091.443666] RSP: 0018:ffff9bacaef9fdb8 EFLAGS: 00010246 [2069091.457692] RAX: 0000000000000000 RBX: ffff9bbbbbfb18a0 RCX: ffffffffc0672310 [2069091.471997] RDX: 00000000000005de RSI: ffffffffc066e7f0 RDI: ffff9beb3f4538d8 [2069091.486130] RBP: ffff9bacaef9fdd8 R08: 0000000000006000 R09: 0000000000006000 [2069091.500321] R10: 0000000000001551 R11: ffffb582996ffff8 R12: ffffb5829b39cc18 [2069091.514779] R13: ffff9badab380c28 R14: ffffd5827f643900 R15: 0000000000000040 [2069091.529472] FS: 0000000000000000(0000) GS:ffff9beb3f440000(0000) knlGS:0000000000000000 [2069091.543926] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [2069091.558942] CR2: 0000000000000030 CR3: 000000193b9a2000 CR4: 00000000007607e0 [2069091.573424] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [2069091.587876] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [2069091.602007] PKRU: 00000000 [2069091.616010] Call Trace: [2069091.629902] [<ffffffffc0663969>] qedf_process_cqe+0x109/0x2e0 [qedf] [2069091.643941] [<ffffffffc0663b66>] qedf_fp_io_handler+0x26/0x60 [qedf] [2069091.657948] [<ffffffff85ebddcf>] process_one_work+0x17f/0x440 [2069091.672111] [<ffffffff85ebeee6>] worker_thread+0x126/0x3c0 [2069091.686057] [<ffffffff85ebedc0>] ? manage_workers.isra.26+0x2a0/0x2a0 [2069091.700033] [<ffffffff85ec5da1>] kthread+0xd1/0xe0 [2069091.713891] [<ffffffff85ec5cd0>] ? insert_kthread_work+0x40/0x40 Add check in qedf_process_error_detect(). When flush is active, let the cmds be completed from the cleanup contex. Link: https://lore.kernel.org/r/20210624171802.598-1-jhasan@marvell.com Signed-off-by: Javed Hasan <jhasan@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-07-25scsi: libfc: Fix array index out of bound exceptionJaved Hasan1-5/+8
[ Upstream commit b27c4577557045f1ab3cdfeabfc7f3cd24aca1fe ] Fix array index out of bound exception in fc_rport_prli_resp(). Link: https://lore.kernel.org/r/20210615165939.24327-1-jhasan@marvell.com Signed-off-by: Javed Hasan <jhasan@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-07-25scsi: libsas: Add LUN number check in .slave_alloc callbackYufen Yu8-0/+16
[ Upstream commit 49da96d77938db21864dae6b7736b71e96c1d203 ] Offlining a SATA device connected to a hisi SAS controller and then scanning the host will result in detecting 255 non-existent devices: # lsscsi [2:0:0:0] disk ATA Samsung SSD 860 2B6Q /dev/sda [2:0:1:0] disk ATA WDC WD2003FYYS-3 1D01 /dev/sdb [2:0:2:0] disk SEAGATE ST600MM0006 B001 /dev/sdc # echo "offline" > /sys/block/sdb/device/state # echo "- - -" > /sys/class/scsi_host/host2/scan # lsscsi [2:0:0:0] disk ATA Samsung SSD 860 2B6Q /dev/sda [2:0:1:0] disk ATA WDC WD2003FYYS-3 1D01 /dev/sdb [2:0:1:1] disk ATA WDC WD2003FYYS-3 1D01 /dev/sdh ... [2:0:1:255] disk ATA WDC WD2003FYYS-3 1D01 /dev/sdjb After a REPORT LUN command issued to the offline device fails, the SCSI midlayer tries to do a sequential scan of all devices whose LUN number is not 0. However, SATA does not support LUN numbers at all. Introduce a generic sas_slave_alloc() handler which will return -ENXIO for SATA devices if the requested LUN number is larger than 0 and make libsas drivers use this function as their .slave_alloc callback. Link: https://lore.kernel.org/r/20210622034037.1467088-1-yuyufen@huawei.com Reported-by: Wu Bo <wubo40@huawei.com> Suggested-by: John Garry <john.garry@huawei.com> Reviewed-by: John Garry <john.garry@huawei.com> Reviewed-by: Jason Yan <yanaijie@huawei.com> Signed-off-by: Yufen Yu <yuyufen@huawei.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-07-25scsi: aic7xxx: Fix unintentional sign extension issue on left shift of u8Colin Ian King1-1/+1
[ Upstream commit 332a9dd1d86f1e7203fc7f0fd7e82f0b304200fe ] The shifting of the u8 integer returned fom ahc_inb(ahc, port+3) by 24 bits to the left will be promoted to a 32 bit signed int and then sign-extended to a u64. In the event that the top bit of the u8 is set then all then all the upper 32 bits of the u64 end up as also being set because of the sign-extension. Fix this by casting the u8 values to a u64 before the 24 bit left shift. [ This dates back to 2002, I found the offending commit from the git history git://git.kernel.org/pub/scm/linux/kernel/git/tglx/history.git, commit f58eb66c0b0a ("Update aic7xxx driver to 6.2.10...") ] Link: https://lore.kernel.org/r/20210621151727.20667-1-colin.king@canonical.com Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Addresses-Coverity: ("Unintended sign extension") Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-07-25rtc: max77686: Do not enforce (incorrect) interrupt trigger typeKrzysztof Kozlowski1-2/+2
[ Upstream commit 742b0d7e15c333303daad4856de0764f4bc83601 ] Interrupt line can be configured on different hardware in different way, even inverted. Therefore driver should not enforce specific trigger type - edge falling - but instead rely on Devicetree to configure it. The Maxim 77686 datasheet describes the interrupt line as active low with a requirement of acknowledge from the CPU therefore the edge falling is not correct. The interrupt line is shared between PMIC and RTC driver, so using level sensitive interrupt is here especially important to avoid races. With an edge configuration in case if first PMIC signals interrupt followed shortly after by the RTC, the interrupt might not be yet cleared/acked thus the second one would not be noticed. Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Link: https://lore.kernel.org/r/20210526172036.183223-6-krzysztof.kozlowski@canonical.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-07-25kbuild: mkcompile_h: consider timestamp if KBUILD_BUILD_TIMESTAMP is setMatthias Maennich1-3/+11
[ Upstream commit a979522a1a88556e42a22ce61bccc58e304cb361 ] To avoid unnecessary recompilations, mkcompile_h does not regenerate compile.h if just the timestamp changed. Though, if KBUILD_BUILD_TIMESTAMP is set, an explicit timestamp for the build was requested, in which case we should not ignore it. If a user follows the documentation for reproducible builds [1] and defines KBUILD_BUILD_TIMESTAMP as the git commit timestamp, a clean build will have the correct timestamp. A subsequent cherry-pick (or amend) changes the commit timestamp and if an incremental build is done with a different KBUILD_BUILD_TIMESTAMP now, that new value is not taken into consideration. But it should for reproducibility. Hence, whenever KBUILD_BUILD_TIMESTAMP is explicitly set, do not ignore UTS_VERSION when making a decision about whether the regenerated version of compile.h should be moved into place. [1] https://www.kernel.org/doc/html/latest/kbuild/reproducible-builds.html Signed-off-by: Matthias Maennich <maennich@google.com> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-07-25thermal/core: Correct function name thermal_zone_device_unregister()Yang Yingliang1-1/+1
[ Upstream commit a052b5118f13febac1bd901fe0b7a807b9d6b51c ] Fix the following make W=1 kernel build warning: drivers/thermal/thermal_core.c:1376: warning: expecting prototype for thermal_device_unregister(). Prototype was for thermal_zone_device_unregister() instead Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20210517051020.3463536-1-yangyingliang@huawei.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-07-25arm64: dts: imx8mq: assign PCIe clocksLucas Stach1-0/+16
[ Upstream commit 15a5261e4d052bf85c7fba24dbe0e9a7c8c05925 ] This fixes multiple issues with the current non-existent PCIe clock setup: The controller can run at up to 250MHz, so use a parent that provides this clock. The PHY needs an exact 100MHz reference clock to function if the PCIe refclock is not fed in via the refclock pads. While this mode is not supported (yet) in the driver it doesn't hurt to make sure we are providing a clock with the right rate. The AUX clock is specified to have a maximum clock rate of 10MHz. So the current setup, which drives it straight from the 25MHz oscillator is actually overclocking the AUX input. Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-07-25arm64: dts: ls208xa: remove bus-num from dspi nodeMian Yousaf Kaukab1-1/+0
[ Upstream commit 8240c972c1798ea013cbb407722295fc826b3584 ] On LS2088A-RDB board, if the spi-fsl-dspi driver is built as module then its probe fails with the following warning: [ 10.471363] couldn't get idr [ 10.471381] WARNING: CPU: 4 PID: 488 at drivers/spi/spi.c:2689 spi_register_controller+0x73c/0x8d0 ... [ 10.471651] fsl-dspi 2100000.spi: Problem registering DSPI ctlr [ 10.471708] fsl-dspi: probe of 2100000.spi failed with error -16 Reason for the failure is that bus-num property is set for dspi node. However, bus-num property is not set for the qspi node. If probe for spi-fsl-qspi happens first then id 0 is dynamically allocated to it. Call to spi_register_controller() from spi-fsl-dspi driver then fails. Since commit 29d2daf2c33c ("spi: spi-fsl-dspi: Make bus-num property optional") bus-num property is optional. Remove bus-num property from dspi node to fix the issue. Signed-off-by: Mian Yousaf Kaukab <ykaukab@suse.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-07-25firmware: tegra: bpmp: Fix Tegra234-only buildsThierry Reding3-2/+5
[ Upstream commit bd778b893963d67d7eb01f49d84ffcd3eaf229dd ] The tegra186_bpmp_ops symbol is used on Tegra234, so make sure it's available. Signed-off-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-07-25soc/tegra: fuse: Fix Tegra234-only buildsThierry Reding1-1/+2
[ Upstream commit e2d0ee225e49a5553986f3138dd2803852a31fd5 ] The tegra30_fuse_read() symbol is used on Tegra234, so make sure it's available. Signed-off-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-07-25ARM: dts: stm32: move stmmac axi config in ethernet node on stm32mp15Alexandre Torgue1-6/+6
[ Upstream commit fb1406335c067be074eab38206cf9abfdce2fb0b ] It fixes the following warning seen running "make dtbs_check W=1" Warning (simple_bus_reg): /soc/stmmac-axi-config: missing or empty reg/ranges property Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-07-25ARM: dts: stm32: fix i2c node name on stm32f746 to prevent warningsAlexandre Torgue1-2/+2
[ Upstream commit ad0ed10ba5792064fc3accbf8f0341152a57eecb ] Replace upper case by lower case in i2c nodes name. Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-07-25ARM: dts: rockchip: fix supply properties in io-domains nodesJohan Jonker2-3/+3
[ Upstream commit f07edc41220b14ce057a4e6d7161b30688ddb8a2 ] A test with rockchip-io-domain.yaml gives notifications for supply properties in io-domains nodes. Fix them all into ".*-supply$" format. Signed-off-by: Johan Jonker <jbx6244@gmail.com> Link: https://lore.kernel.org/r/20210606181632.13371-1-jbx6244@gmail.com Signed-off-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-07-25arm64: dts: juno: Update SCPI nodes as per the YAML schemaSudeep Holla1-3/+3
[ Upstream commit 70010556b158a0fefe43415fb0c58347dcce7da0 ] The SCPI YAML schema expects standard node names for clocks and power domain controllers. Fix those as per the schema for Juno platforms. Link: https://lore.kernel.org/r/20210608145133.2088631-1-sudeep.holla@arm.com Signed-off-by: Sudeep Holla <sudeep.holla@arm.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-07-25ARM: dts: stm32: fix timer nodes on STM32 MCU to prevent warningsAlexandre Torgue3-20/+0
[ Upstream commit 2388f14d8747f8304e26ee870790e188c9431efd ] Prevent warning seen with "make dtbs_check W=1" command: Warning (avoid_unnecessary_addr_size): /soc/timers@40001c00: unnecessary address-cells/size-cells without "ranges" or child "reg" property Reviewed-by: Fabrice Gasnier <fabrice.gasnier@foss.st.com> Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-07-25ARM: dts: stm32: fix RCC node name on stm32f429 MCUAlexandre Torgue1-1/+1
[ Upstream commit e4b948415a89a219d13e454011cdcf9e63ecc529 ] This prevent warning observed with "make dtbs_check W=1" Warning (simple_bus_reg): /soc/rcc@40023810: simple-bus unit address format error, expected "40023800" Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-07-25ARM: dts: stm32: fix gpio-keys node on STM32 MCU boardsAlexandre Torgue5-21/+11
[ Upstream commit bf24b91f4baf7e421c770a1d9c7d381b10206ac9 ] Fix following warning observed with "make dtbs_check W=1" command. It concerns f429 eval and disco boards, f769 disco board. Warning (unit_address_vs_reg): /gpio_keys/button@0: node has a unit name, but no reg or ranges property Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-07-25ARM: dts: am437x-gp-evm: fix ti,no-reset-on-init flag for gpiosGrygorii Strashko2-2/+5
[ Upstream commit 2566d5b8c1670f7d7a44cc1426d254147ec5c421 ] The ti,no-reset-on-init flag need to be at the interconnect target module level for the modules that have it defined. The ti-sysc driver handles this case, but produces warning, not a critical issue. Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-07-25ARM: dts: am57xx-cl-som-am57x: fix ti,no-reset-on-init flag for gpiosGrygorii Strashko2-5/+4
[ Upstream commit b644c5e01c870056e13a096e14b9a92075c8f682 ] The ti,no-reset-on-init flag need to be at the interconnect target module level for the modules that have it defined. The ti-sysc driver handles this case, but produces warning, not a critical issue. Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-07-25kbuild: sink stdout from cmd for silent buildMasahiro Yamada1-1/+6
[ Upstream commit 174a1dcc96429efce4ef7eb2f5c4506480da2182 ] When building with 'make -s', no output to stdout should be printed. As Arnd Bergmann reported [1], mkimage shows the detailed information of the generated images. I think this should be suppressed by the 'cmd' macro instead of by individual scripts. Insert 'exec >/dev/null;' in order to redirect stdout to /dev/null for silent builds. [Note about this implementation] 'exec >/dev/null;' may look somewhat tricky, but this has a reason. Appending '>/dev/null' at the end of command line is a common way for redirection, so I first tried this: cmd = @set -e; $(echo-cmd) $(cmd_$(1)) >/dev/null ... but it would not work if $(cmd_$(1)) itself contains a redirection. For example, cmd_wrap in scripts/Makefile.asm-generic redirects the output from the 'echo' command into the target file. It would be expanded into: echo "#include <asm-generic/$*.h>" > $@ >/dev/null Then, the target file gets empty because the string will go to /dev/null instead of $@. Next, I tried this: cmd = @set -e; $(echo-cmd) { $(cmd_$(1)); } >/dev/null The form above would be expanded into: { echo "#include <asm-generic/$*.h>" > $@; } >/dev/null This works as expected. However, it would be a syntax error if $(cmd_$(1)) is empty. When CONFIG_TRIM_UNUSED_KSYMS is disabled, $(call cmd,gen_ksymdeps) in scripts/Makefile.build would be expanded into: set -e; { ; } >/dev/null ..., which causes an syntax error. I also tried this: cmd = @set -e; $(echo-cmd) ( $(cmd_$(1)) ) >/dev/null ... but this causes a syntax error for the same reason. So, finally I adopted: cmd = @set -e; $(echo-cmd) exec >/dev/null; $(cmd_$(1)) [1]: https://lore.kernel.org/lkml/20210514135752.2910387-1-arnd@kernel.org/ Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-07-25rtc: mxc_v2: add missing MODULE_DEVICE_TABLEBixuan Cui1-0/+1
[ Upstream commit 206e04ec7539e7bfdde9aa79a7cde656c9eb308e ] This patch adds missing MODULE_DEVICE_TABLE definition which generates correct modalias for automatic loading of this driver when it is built as an external module. Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Bixuan Cui <cuibixuan@huawei.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Link: https://lore.kernel.org/r/20210508031509.53735-1-cuibixuan@huawei.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-07-25ARM: imx: pm-imx5: Fix references to imx5_cpu_suspend_infoJonathan Neuschäfer1-2/+2
[ Upstream commit 89b759469d525f4d5f9c29cd3b1f490311c67f85 ] The name of the struct, as defined in arch/arm/mach-imx/pm-imx5.c, is imx5_cpu_suspend_info. Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Reviewed-by: Fabio Estevam <festevam@gmail.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-07-25ARM: dts: imx6: phyFLEX: Fix UART hardware flow controlPrimoz Fiser1-2/+3
[ Upstream commit 14cdc1f243d79e0b46be150502b7dba9c5a6bdfd ] Serial interface uart3 on phyFLEX board is capable of 5-wire connection including signals RTS and CTS for hardware flow control. Fix signals UART3_CTS_B and UART3_RTS_B padmux assignments and add missing property "uart-has-rtscts" to allow serial interface to be configured and used with the hardware flow control. Signed-off-by: Primoz Fiser <primoz.fiser@norik.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-07-25ARM: dts: Hurricane 2: Fix NAND nodes namesRafał Miłecki1-1/+1
[ Upstream commit a4528d9029e2eda16e4fc9b9da1de1fbec10ab26 ] This matches nand-controller.yaml requirements. Signed-off-by: Rafał Miłecki <rafal@milecki.pl> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-07-25ARM: dts: BCM63xx: Fix NAND nodes namesRafał Miłecki2-3/+3
[ Upstream commit 75e2f012f6e34b93124d1d86eaa8f27df48e9ea0 ] This matches nand-controller.yaml requirements. Signed-off-by: Rafał Miłecki <rafal@milecki.pl> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-07-25ARM: NSP: dts: fix NAND nodes namesRafał Miłecki9-17/+17
[ Upstream commit 0484594be733d5cdf976f55a2d4e8d887f351b69 ] This matches nand-controller.yaml requirements. Signed-off-by: Rafał Miłecki <rafal@milecki.pl> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-07-25ARM: Cygnus: dts: fix NAND nodes namesRafał Miłecki4-7/+7
[ Upstream commit e256b48a3b07ee1ae4bfa60abbf509ba8e386862 ] This matches nand-controller.yaml requirements. Signed-off-by: Rafał Miłecki <rafal@milecki.pl> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-07-25ARM: brcmstb: dts: fix NAND nodes namesRafał Miłecki2-3/+3
[ Upstream commit 9a800ce1aada6e0f56b78e4713f4858c8990c1f7 ] This matches nand-controller.yaml requirements. Signed-off-by: Rafał Miłecki <rafal@milecki.pl> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-07-25reset: ti-syscon: fix to_ti_syscon_reset_data macroPhilipp Zabel1-2/+2
[ Upstream commit 05cf8fffcdeb47aef1203c08cbec5224fd3a0e1c ] The to_ti_syscon_reset_data macro currently only works if the parameter passed into it is called 'rcdev'. Fixes a checkpatch --strict issue: CHECK: Macro argument reuse 'rcdev' - possible side-effects? #53: FILE: drivers/reset/reset-ti-syscon.c:53: +#define to_ti_syscon_reset_data(rcdev) \ + container_of(rcdev, struct ti_syscon_reset_data, rcdev) Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-07-25arm64: dts: rockchip: Fix power-controller node names for rk3328Elaine Zhang1-3/+3
[ Upstream commit 6e6a282b49c6db408d27231e3c709fbdf25e3c1b ] Use more generic names (as recommended in the device tree specification or the binding documentation) Signed-off-by: Elaine Zhang <zhangqing@rock-chips.com> Reviewed-by: Enric Balletbo i Serra <enric.balletbo@collabora.com> Signed-off-by: Johan Jonker <jbx6244@gmail.com> Link: https://lore.kernel.org/r/20210417112952.8516-7-jbx6244@gmail.com Signed-off-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-07-25arm64: dts: rockchip: Fix power-controller node names for px30Elaine Zhang1-8/+8
[ Upstream commit d5de0d688ac6e0202674577b05d0726b8a6af401 ] Use more generic names (as recommended in the device tree specification or the binding documentation) Signed-off-by: Elaine Zhang <zhangqing@rock-chips.com> Reviewed-by: Enric Balletbo i Serra <enric.balletbo@collabora.com> Signed-off-by: Johan Jonker <jbx6244@gmail.com> Link: https://lore.kernel.org/r/20210417112952.8516-6-jbx6244@gmail.com Signed-off-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-07-25ARM: dts: rockchip: Fix power-controller node names for rk3288Elaine Zhang1-4/+4
[ Upstream commit 970cdc53cb1afa73602028c103dbfb6a230080be ] Use more generic names (as recommended in the device tree specification or the binding documentation) Signed-off-by: Elaine Zhang <zhangqing@rock-chips.com> Reviewed-by: Enric Balletbo i Serra <enric.balletbo@collabora.com> Signed-off-by: Johan Jonker <jbx6244@gmail.com> Link: https://lore.kernel.org/r/20210417112952.8516-4-jbx6244@gmail.com Signed-off-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-07-25ARM: dts: rockchip: Fix power-controller node names for rk3188Elaine Zhang1-3/+3
[ Upstream commit d3bcbcd396175ac26aa54919c0b31c7d2878fc24 ] Use more generic names (as recommended in the device tree specification or the binding documentation) Signed-off-by: Elaine Zhang <zhangqing@rock-chips.com> Reviewed-by: Enric Balletbo i Serra <enric.balletbo@collabora.com> Signed-off-by: Johan Jonker <jbx6244@gmail.com> Link: https://lore.kernel.org/r/20210417112952.8516-3-jbx6244@gmail.com Signed-off-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-07-25ARM: dts: rockchip: Fix power-controller node names for rk3066aElaine Zhang1-3/+3
[ Upstream commit f2948781a72f0d8cf2adf31758c357f2f35e6c79 ] Use more generic names (as recommended in the device tree specification or the binding documentation) Signed-off-by: Elaine Zhang <zhangqing@rock-chips.com> Reviewed-by: Enric Balletbo i Serra <enric.balletbo@collabora.com> Signed-off-by: Johan Jonker <jbx6244@gmail.com> Link: https://lore.kernel.org/r/20210417112952.8516-2-jbx6244@gmail.com Signed-off-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-07-25ARM: dts: rockchip: Fix IOMMU nodes properties on rk322xBenjamin Gaignard1-7/+3
[ Upstream commit 6b023929666f0be5df75f5e0278d1b70effadf42 ] Add '#" to iommu-cells properties. Remove useless interrupt-names properties Signed-off-by: Benjamin Gaignard <benjamin.gaignard@collabora.com> Link: https://lore.kernel.org/r/20210507090232.233049-4-benjamin.gaignard@collabora.com Signed-off-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-07-25ARM: dts: rockchip: Fix the timer clocks orderEzequiel Garcia2-6/+6
[ Upstream commit 7b46d674ac000b101fdad92cf16cc11d90b72f86 ] Fixed order is the device-tree convention. The timer driver currently gets clocks by name, so no changes are needed there. Signed-off-by: Ezequiel Garcia <ezequiel@collabora.com> Link: https://lore.kernel.org/r/20210506111136.3941-3-ezequiel@collabora.com Signed-off-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
generated by cgit v1.2.3 (git 2.39.0) at 2024-10-06 12:59:22 +0300