summaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2013-01-24Merge tag 'at91-fixes' of git://github.com/at91linux/linux-at91 into fixesOlof Johansson6-25/+51
From Nicolas Ferre: Here are fixes for AT91 that are mainly related to device tree. One RM9200 setup option is the only C code change. Some documentation changes can clarify the pinctrl use. Then, some defconfig modifications are allowing the affected platforms to boot. * tag 'at91-fixes' of git://github.com/at91linux/linux-at91: ARM: at91/dts: correct comment in at91sam9x5.dtsi for mii ARM: at91/at91_dt_defconfig: add at91sam9n12 SoC to DT defconfig ARM: at91/at91_dt_defconfig: remove memory specification to cmdline ARM: at91/dts: add macb mii pinctrl config for kizbox ARM: at91: rm9200: remake the BGA as default version ARM: at91: fix gpios on i2c-gpio for RM9200 DT ARM: at91/at91sam9x5 DTS: add SCK USART pins ARM: at91/at91sam9x5 DTS: correct wrong PIO BANK values on u(s)arts ARM: at91/at91-pinctrl documentation: fix typo and add some details
2013-01-24Merge tag 'imx-fixes-3.8-3' of ↵Olof Johansson1-0/+10
git://git.linaro.org/people/shawnguo/linux-2.6 into fixes From Shawn Guo: This is yet another critical imxfb fixes held off by absence of FB maintainer for some time. * tag 'imx-fixes-3.8-3' of git://git.linaro.org/people/shawnguo/linux-2.6: video: imxfb: Do not crash on reboot
2013-01-24Merge tag 'mvebu_fixes_for_v3.8-rc5' of ↵Olof Johansson3-65/+38
git://git.infradead.org/users/jcooper/linux into fixes From Jason Cooper: mvebu fixes for v3.8-rc5 - fix memory leak in mvebu/clk-cpu.c - use devm_ to correct/simplify error paths in mvsdio - add missing #interrupt-cells property in kirkwood * tag 'mvebu_fixes_for_v3.8-rc5' of git://git.infradead.org/users/jcooper/linux: ARM: kirkwood: fix missing #interrupt-cells property mmc: mvsdio: use devm_ API to simplify/correct error paths. clk: mvebu/clk-cpu.c: fix memory leakage
2013-01-23ARM: at91/dts: correct comment in at91sam9x5.dtsi for miiDouglas Gilbert1-8/+8
Concerning pinctrl_macb0_rmii_mii, values were okay, but not comments. Signed-off-by: Douglas Gilbert <dgilbert@interlog.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2013-01-23ARM: at91/at91_dt_defconfig: add at91sam9n12 SoC to DT defconfigNicolas Ferre1-0/+1
Reported-by: Josh Wu <josh.wu@atmel.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2013-01-23ARM: at91/at91_dt_defconfig: remove memory specification to cmdlineNicolas Ferre1-1/+1
No need for this cmdline option as we are using DT. Moreover this defconfig is targeted to multiple SoC/boards: this option was nonsense. Reported-by: Josh Wu <josh.wu@atmel.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2013-01-23ARM: at91/dts: add macb mii pinctrl config for kizboxBoris BREZILLON1-0/+2
This patch overrides default macb pinctrl config defined in at91sam9260.dtsi (pinctrl_macb_rmii) with kizbox board config (pinctrl_macb_rmii + pinctrl_macb_rmii_mii_alt). Signed-off-by: Boris BREZILLON <linux-arm@overkiz.com> Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2013-01-23ARM: at91: rm9200: remake the BGA as default versionJean-Christophe PLAGNIOL-VILLARD1-0/+2
Make BGA as the default version as we are supposed to just have to specify when we use the PQFP version. Issue was existing since commit: 3e90772 (ARM: at91: fix at91rm9200 soc subtype handling). Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Cc: stable <stable@vger.kernel.org> [v3.3] Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2013-01-23ARM: at91: fix gpios on i2c-gpio for RM9200 DTJoachim Eastwood1-2/+2
Signed-off-by: Joachim Eastwood <manabian@gmail.com> Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2013-01-23ARM: at91/at91sam9x5 DTS: add SCK USART pinsRichard Genoud1-0/+20
The SCK pins where missing in usarts pinctrl. Signed-off-by: Richard Genoud <richard.genoud@gmail.com> Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2013-01-23ARM: at91/at91sam9x5 DTS: correct wrong PIO BANK values on u(s)artsRichard Genoud1-12/+12
The PIN_BANK 3 is for PDxx pins, not PCxx pins. And PIN_BANK 1 is for PBxx, not PIN_BANK 0. Signed-off-by: Richard Genoud <richard.genoud@gmail.com> Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2013-01-23ARM: at91/at91-pinctrl documentation: fix typo and add some detailsRichard Genoud1-2/+3
The relation between PIN_BANK numbers and pio letters wasn't made very clear. Signed-off-by: Richard Genoud <richard.genoud@gmail.com> Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2013-01-23ARM: kirkwood: fix missing #interrupt-cells propertySebastian Hesselbarth1-0/+2
The gpio controller on kirkwood can provide interrupts but is missing the #interrupt-cells property. This patch just adds it to both gpio controllers. Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2013-01-23mmc: mvsdio: use devm_ API to simplify/correct error paths.Andrew Lunn1-62/+30
There are a number of bugs in the error paths of this driver. Make use of devm_ functions to simplify the cleanup on error. Based on a patch by Russell King. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2013-01-23clk: mvebu/clk-cpu.c: fix memory leakageCong Ding1-3/+6
the variable cpuclk and clk_name should be properly freed when error happens. Signed-off-by: Cong Ding <dinggnu@gmail.com> Acked-by: Jason Cooper <jason@lakedaemon.net> Acked-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Acked-by: Mike Turquette <mturquette@linaro.org> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2013-01-22Merge tag 'omap-for-v3.8-rc4/fixes-signed' of ↵Olof Johansson363-2274/+10023
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into fixes From Tony Lindgren: Minimal omap fixes for the -rc series: - A build fix for recently merged omap DRM changes - Regression fixes from the common clock framework conversion for omap4 audio and omap2 reboot - Regression fix for pandaboard WLAN control UART muxing caused by u-boot only muxing essential pins nowadays - Timer iteration fix for CONFIG_OF_DYNAMIC - A section mismatch fix for ocp2scp init * tag 'omap-for-v3.8-rc4/fixes-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: (306 commits) ARM: OMAP2+: omap4-panda: add UART2 muxing for WiLink shared transport ARM: OMAP2+: DT node Timer iteration fix ARM: OMAP2+: Fix section warning for omap_init_ocp2scp() ARM: OMAP2+: fix build break for omapdrm ARM: OMAP2: Fix missing omap2xxx_clkt_vps_late_init function calls ARM: OMAP4: hwmod_data: Correct IDLEMODE for McPDM ARM: OMAP4: clock data: Lock ABE DPLL on all revisions + Linux 3.8-rc4 Signed-off-by: Olof Johansson <olof@lixom.net>
2013-01-22Merge tag 'imx-fixes-rc' of git://git.pengutronix.de/git/imx/linux-2.6 into ↵Olof Johansson3-3/+2
fixes From Sascha Hauer: ARM i.MX fixes for -rc. This contains a single compilation fix for the CODA driver. * tag 'imx-fixes-rc' of git://git.pengutronix.de/git/imx/linux-2.6: [media] coda: Fix build due to iram.h rename
2013-01-21ARM: OMAP2+: omap4-panda: add UART2 muxing for WiLink shared transportLuciano Coelho1-0/+6
Add the UART2 muxing data to the board file (this used to be, erroneously, done in the bootloader). Cc: stable <stable@vger.kernel.org> [3.7] Signed-off-by: Luciano Coelho <coelho@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2013-01-21ARM: OMAP2+: DT node Timer iteration fixPantelis Antoniou1-6/+2
The iterator correctly handles of_node_put() calls. Remove it before continue'ing the loop. Without this patch you get the following with CONFIG_OF_DYNAMIC set: ERROR: Bad of_node_put() on /ocp/timer@44e31000! [<c001329c>] (unwind_backtrace+0x0/0xe0) from [<c03dd8f0>] (of_node_release+0x2c/0xa0)! [<c03dd8f0>] (of_node_release+0x2c/0xa0) from [<c03ddea0>] (of_find_matching_node_and_match+0x78/0x90)! [<c03ddea0>] (of_find_matching_node_and_match+0x78/0x90) from [<c06d349c>] (omap_get_timer_dt+0x78/0x90)! [<c06d349c>] (omap_get_timer_dt+0x78/0x90) from [<c06d3664>] (omap_dm_timer_init_one.clone.2+0x34/0x2bc)! [<c06d3664>] (omap_dm_timer_init_one.clone.2+0x34/0x2bc) from [<c06d3a2c>] (omap2_gptimer_clocksource_init.clone.4+0x24/0xa8)! [<c06d3a2c>] (omap2_gptimer_clocksource_init.clone.4+0x24/0xa8) from [<c06cca58>] (time_init+0x20/0x30)! [<c06cca58>] (time_init+0x20/0x30) from [<c06c9690>] (start_kernel+0x1a8/0x2fc)! Signed-off-by: Pantelis Antoniou <panto@antoniou-consulting.com> Acked-by: Jon Hunter <jon-hunter@ti.com> [tony@atomide.com: updated description per Jon] Signed-off-by: Tony Lindgren <tony@atomide.com>
2013-01-21ARM: OMAP2+: Fix section warning for omap_init_ocp2scp()Tony Lindgren1-1/+1
Otherwise we will get: WARNING: vmlinux.o(.text+0x1d4f0): Section mismatch in reference from the function omap_init_ocp2scp() to the function .init.text:omap_device_build() The function omap_init_ocp2scp() references the function __init omap_device_build(). This is often because omap_init_ocp2scp lacks a __init annotation or the annotation of omap_device_build is wrong. Signed-off-by: Tony Lindgren <tony@atomide.com>
2013-01-21ARM: OMAP2+: fix build break for omapdrmRob Clark1-1/+2
Fixes compile break with 3.8-rc4. Signed-off-by: Rob Clark <robdclark@gmail.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2013-01-21Merge tag 'omap-fixes-b-for-v3.8-rc' of ↵Tony Lindgren4-8/+15
git://git.kernel.org/pub/scm/linux/kernel/git/pjw/omap-pending into omap-for-v3.8-rc4/fixes A few OMAP integration fixes for v3.8-rc, for OMAP4 audio and OMAP2 reboot. Basic test logs are available here: http://www.pwsan.com/omap/testlogs/prcm_fixes_c_v3.8-rc/20130121073904/
2013-01-19ARM: OMAP2: Fix missing omap2xxx_clkt_vps_late_init function callsJon Hunter2-0/+4
During the migration to the common clock framework, calls to the functions omap2xxx_clkt_vps_late_init() were not preserved for OMAP2420 and OMAP2430. This causes the variables "sys_ck_rate" and "curr_prcm_set" to be uninitialised on boot. On reboot, this causes the following error message to be displayed because the appropriate MPU clock frequency (derived from sys_ck_rate) cannot be found. "Could not set MPU rate to 4294MHz" Fix this by adding back calls to omap2xxx_clkt_vps_late_init() in the OMAP2420 and OMAP2430 clock initialisation code. Signed-off-by: Jon Hunter <jon-hunter@ti.com> [paul@pwsan.com: dropped the duplicated call to omap2xxx_clkt_vps_check_bootloader_rates() after consultation with Jon; updated patch description] Signed-off-by: Paul Walmsley <paul@pwsan.com>
2013-01-19ARM: OMAP4: hwmod_data: Correct IDLEMODE for McPDMPeter Ujfalusi1-1/+5
McPDM need to be configured to NO_IDLE mode when it is in used otherwise vital clocks will be gated which results 'slow motion' audio playback. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> [paul@pwsan.com: copy patch description into hwmod data comments] Signed-off-by: Paul Walmsley <paul@pwsan.com>
2013-01-19ARM: OMAP4: clock data: Lock ABE DPLL on all revisionsPeter Ujfalusi1-7/+6
To avoid issues with audio caused by non locked ABE DPLL we should make sure it is locked in all OMAP4 revisions. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Acked-by: Jon Hunter <jon-hunter@ti.com> [paul@pwsan.com: cleaned up patch description] Signed-off-by: Paul Walmsley <paul@pwsan.com>
2013-01-18Linux 3.8-rc4v3.8-rc4Linus Torvalds1-1/+1
2013-01-17Merge branch 'for-linus' of ↵Linus Torvalds6-27/+45
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux Pull more s390 patches from Martin Schwidefsky: "A couple of bug fixes: one of the transparent huge page primitives is broken, the sched_clock function overflows after 417 days, the XFS module has grown too large for -fpic and the new pci code has broken normal channel subsystem notifications." * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: s390/chsc: fix SEI usage s390/time: fix sched_clock() overflow s390: use -fPIC for module compile s390/mm: fix pmd_pfn() for thp
2013-01-17video: imxfb: Do not crash on rebootFabio Estevam1-0/+10
Issuing a "reboot" command after the LCD times out causes the following warnings: Requesting system reboot ------------[ cut here ]------------ WARNING: at drivers/clk/clk.c:471 clk_disable+0x24/0x50() Modules linked in: [<c001ad90>] (unwind_backtrace+0x0/0xf4) from [<c0025aac>] (warn_slowpath_common+0x48/0x60) [<c0025aac>] (warn_slowpath_common+0x48/0x60) from [<c0025ae0>] (warn_slowpath_null+0x1c/0x24) [<c0025ae0>] (warn_slowpath_null+0x1c/0x24) from [<c03960a0>] (clk_disable+0x24/0x50) [<c03960a0>] (clk_disable+0x24/0x50) from [<c02695a0>] (imxfb_disable_controller+0x48/0x7c) [<c02695a0>] (imxfb_disable_controller+0x48/0x7c) from [<c029d838>] (platform_drv_shutdown+0x18/0x1c) [<c029d838>] (platform_drv_shutdown+0x18/0x1c) from [<c02990fc>] (device_shutdown+0x48/0x14c) [<c02990fc>] (device_shutdown+0x48/0x14c) from [<c003d09c>] (kernel_restart_prepare+0x2c/0x3c) [<c003d09c>] (kernel_restart_prepare+0x2c/0x3c) from [<c003d0e4>] (kernel_restart+0xc/0x48) [<c003d0e4>] (kernel_restart+0xc/0x48) from [<c003d1e8>] (sys_reboot+0xc0/0x1bc) [<c003d1e8>] (sys_reboot+0xc0/0x1bc) from [<c0014ca0>] (ret_fast_syscall+0x0/0x2c) ---[ end trace da6b502ca79c854f ]--- ------------[ cut here ]------------ WARNING: at drivers/clk/clk.c:380 clk_unprepare+0x1c/0x2c() Modules linked in: [<c001ad90>] (unwind_backtrace+0x0/0xf4) from [<c0025aac>] (warn_slowpath_common+0x48/0x60) [<c0025aac>] (warn_slowpath_common+0x48/0x60) from [<c0025ae0>] (warn_slowpath_null+0x1c/0x24) [<c0025ae0>] (warn_slowpath_null+0x1c/0x24) from [<c0396338>] (clk_unprepare+0x1c/0x2c) [<c0396338>] (clk_unprepare+0x1c/0x2c) from [<c02695a8>] (imxfb_disable_controller+0x50/0x7c) [<c02695a8>] (imxfb_disable_controller+0x50/0x7c) from [<c029d838>] (platform_drv_shutdown+0x18/0x1c) [<c029d838>] (platform_drv_shutdown+0x18/0x1c) from [<c02990fc>] (device_shutdown+0x48/0x14c) [<c02990fc>] (device_shutdown+0x48/0x14c) from [<c003d09c>] (kernel_restart_prepare+0x2c/0x3c) [<c003d09c>] (kernel_restart_prepare+0x2c/0x3c) from [<c003d0e4>] (kernel_restart+0xc/0x48) [<c003d0e4>] (kernel_restart+0xc/0x48) from [<c003d1e8>] (sys_reboot+0xc0/0x1bc) [<c003d1e8>] (sys_reboot+0xc0/0x1bc) from [<c0014ca0>] (ret_fast_syscall+0x0/0x2c) ---[ end trace da6b502ca79c8550 ]--- ------------[ cut here ]------------ This happens because "reboot" triggers imxfb_shutdown(), which calls imxfb_disable_controller with the clocks already disabled. To prevent this, add a clock enabled status so that we can check if the clocks are enabled before disabling them. Acked-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-01-17Merge branch 'v3.8-samsung-fixes-3' of ↵Olof Johansson1359-7673/+7657
git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung into fixes From Kukjin Kim: That branch fixes build error for S3C24XX/S3C64xx. And corrects dw-mshc properties on EXYNOS5 DT and fixes IRQ mapping on Cragganmore board. * 'v3.8-samsung-fixes-3' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung: ARM: S3C64XX: Fix up IRQ mapping for balblair on Cragganmore ARM: dts: correct the dw-mshc timing properties as per binding ARM: S3C64XX: Fix build error with CONFIG_S3C_DEV_FB disabled + Linux 3.8-rc3 Signed-off-by: Olof Johansson <olof@lixom.net>
2013-01-17Merge tag 'for-linus-v3.8-rc4' of git://oss.sgi.com/xfs/xfsLinus Torvalds7-42/+64
Pull xfs bugfixes from Ben Myers: - fix(es) for compound buffers - fix for dquot soft timer asserts due to overflow of d_blk_softlimit - fix for regression in dir v2 code introduced in commit 20f7e9f3726a ("xfs: factor dir2 block read operations") * tag 'for-linus-v3.8-rc4' of git://oss.sgi.com/xfs/xfs: xfs: recalculate leaf entry pointer after compacting a dir2 block xfs: remove int casts from debug dquot soft limit timer asserts xfs: fix the multi-segment log buffer format xfs: fix segment in xfs_buf_item_format_segment xfs: rename bli_format to avoid confusion with bli_formats xfs: use b_maps[] for discontiguous buffers
2013-01-17ARM: S3C64XX: Fix up IRQ mapping for balblair on CragganmoreDimitris Papastamos1-1/+1
We are using S3C_EINT(4) instead of S3C_EINT(5). Signed-off-by: Dimitris Papastamos <dp@opensource.wolfsonmicro.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: stable@vger.kernel.org Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2013-01-17ARM: dts: correct the dw-mshc timing properties as per bindingAlim Akhtar2-10/+10
As per the current exynos-dw-mshc bindings, dw-mshc-sdr-timing and dw-mshc-ddr-timing properties are having only two cells, these properties are wrongly set for exynos5250 based cros5250 and smdk5250 platfroms. This patch corrects above timing propreties for above platfroms Signed-off-by: Alim Akhtar <alim.akhtar@samsung.com> Tested-by: Doug Anderson <dianders@chromium.org> Acked-by: Doug Anderson <dianders@chromium.org> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2013-01-17ARM: S3C64XX: Fix build error with CONFIG_S3C_DEV_FB disabledTomasz Figa1-0/+2
If there is no board selecting CONFIG_S3C_DEV_FB enabled, build will fail on arch/arm/mach-s3c64xx/pm.c, where s3c_device_fb is referenced. This patch adds ifdef guard around the code making it compile only when CONFIG_S3C_DEV_FB is enabled. Signed-off-by: Tomasz Figa <tomasz.figa@gmail.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2013-01-17Merge tag 'pm+acpi-for-3.8-rc4' of ↵Linus Torvalds6-47/+9
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull ACPI and power management fixes from Rafael Wysocki: - cpuidle regression fix related to the initialization of state kobjects from Krzysztof Mazur. - cpuidle fix removing some not very useful code and making some user-visible problems go away at the same time. From Daniel Lezcano. - ACPI build fix from Yinghai Lu. * tag 'pm+acpi-for-3.8-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: cpuidle: remove the power_specified field in the driver ACPI / glue: Fix build with ACPI_GLUE_DEBUG set cpuidle: fix number of initialized/destroyed states
2013-01-17ARM: compile fix for DEBUG_LL=y && MMU=nUwe Kleine-König1-0/+2
debug_ll_addr is only used on machines with an MMU so it can be #ifdef'ed out safely. This fixes: arch/arm/kernel/debug.S: Assembler messages: arch/arm/kernel/debug.S:104: Error: too many positional arguments The problem was introduced in e5c5f2a ARM: implement debug_ll_io_init(). Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Reviewed-by: Stephen Warren <swarren@nvidia.com> Acked-by: Rob Herring <rob.herring@calxeda.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2013-01-17xfs: recalculate leaf entry pointer after compacting a dir2 blockEric Sandeen1-2/+4
Dave Jones hit this assert when doing a compile on recent git, with CONFIG_XFS_DEBUG enabled: XFS: Assertion failed: (char *)dup - (char *)hdr == be16_to_cpu(*xfs_dir2_data_unused_tag_p(dup)), file: fs/xfs/xfs_dir2_data.c, line: 828 Upon further digging, the tag found by xfs_dir2_data_unused_tag_p(dup) contained "2" and not the proper offset, and I found that this value was changed after the memmoves under "Use a stale leaf for our new entry." in xfs_dir2_block_addname(), i.e. memmove(&blp[mid + 1], &blp[mid], (highstale - mid) * sizeof(*blp)); overwrote it. What has happened is that the previous call to xfs_dir2_block_compact() has rearranged things; it changes btp->count as well as the blp array. So after we make that call, we must recalculate the proper pointer to the leaf entries by making another call to xfs_dir2_block_leaf_p(). Dave provided a metadump image which led to a simple reproducer (create a particular filename in the affected directory) and this resolves the testcase as well as the bug on his live system. Thanks also to dchinner for looking at this one with me. Signed-off-by: Eric Sandeen <sandeen@redhat.com> Tested-by: Dave Jones <davej@redhat.com> Reviewed-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Mark Tinguely <tinguely@sgi.com> Signed-off-by: Ben Myers <bpm@sgi.com>
2013-01-17xfs: remove int casts from debug dquot soft limit timer assertsBrian Foster1-2/+2
The int casts here make it easy to trigger an assert with a large soft limit. For example, set a >4TB soft limit on an empty volume to reproduce a (0 > -x) comparison due to an overflow of d_blk_softlimit. Signed-off-by: Brian Foster <bfoster@redhat.com> Reviewed-by: Ben Myers <bpm@sgi.com> Signed-off-by: Ben Myers <bpm@sgi.com>
2013-01-17xfs: fix the multi-segment log buffer formatMark Tinguely2-5/+15
Per Dave Chinner suggestion, this patch: 1) Corrects the detection of whether a multi-segment buffer is still tracking data. 2) Clears all the buffer log formats for a multi-segment buffer. Signed-off-by: Mark Tinguely <tinguely@sgi.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Ben Myers <bpm@sgi.com>
2013-01-17xfs: fix segment in xfs_buf_item_format_segmentMark Tinguely1-5/+15
Not every segment in a multi-segment buffer is dirty in a transaction and they will not be outputted. The assert in xfs_buf_item_format_segment() that checks for the at least one chunk of data in the segment to be used is not necessary true for multi-segmented buffers. Signed-off-by: Mark Tinguely <tinguely@sgi.com> Reviewed-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Ben Myers <bpm@sgi.com>
2013-01-17xfs: rename bli_format to avoid confusion with bli_formatsMark Tinguely3-24/+24
Rename the bli_format structure to __bli_format to avoid accidently confusing them with the bli_formats pointer. Signed-off-by: Mark Tinguely <tinguely@sgi.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Ben Myers <bpm@sgi.com>
2013-01-17xfs: use b_maps[] for discontiguous buffersMark Tinguely2-9/+9
Commits starting at 77c1a08 introduced a multiple segment support to xfs_buf. xfs_trans_buf_item_match() could not find a multi-segment buffer in the transaction because it was looking at the single segment block number rather than the multi-segment b_maps[0].bm.bn. This results on a recursive buffer lock that can never be satisfied. This patch: 1) Changed the remaining b_map accesses to be b_maps[0] accesses. 2) Renames the single segment b_map structure to __b_map to avoid future confusion. Signed-off-by: Mark Tinguely <tinguely@sgi.com> Reviewed-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Ben Myers <bpm@sgi.com>
2013-01-17Tell the world we gave up on pushing CC_OPTIMIZE_FOR_SIZEKirill Smelkov1-1/+1
In commit 281dc5c5ec0f ("Give up on pushing CC_OPTIMIZE_FOR_SIZE") we already changed the actual default value, but the help-text still suggested 'y'. Fix the help text too, for all the same reasons. Sadly, -Os keeps on generating some very suboptimal code for certain cases, to the point where any I$ miss upside is swamped by the downside. The main ones are: - using "rep movsb" for memcpy, even on CPU's where that is horrendously bad for performance. - not honoring branch prediction information, so any I$ footprint you win from smaller code, you lose from less code density in the I$. - using divide instructions when that is very expensive. Signed-off-by: Kirill Smelkov <kirr@mns.spb.ru> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-01-17mfd, TWL4030: TWL4030 need select REGMAP_I2CChuansheng Liu1-0/+1
Fix the build error: drivers/built-in.o: In function `twl_probe': drivers/mfd/twl-core.c:1256: undefined reference to `devm_regmap_init_i2c' make: *** [vmlinux] Error 1 Signed-off-by: liu chuansheng <chuansheng.liu@intel.com> Acked-by: Peter Ujfalusi <peter.ujfalusi@ti.com> [ Samuel is busy, taking it directly - Linus ] Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-01-17drivers/base/cpu.c: Fix typo in commentRalf Baechle1-1/+1
[ We should make fun of people who can't speel too, but then we'd have no time for any real work at all - Linus ] Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-01-17Merge tag 'sunxi-fixes-for-3.8-rc4' of git://github.com/mripard/linux into fixesOlof Johansson1-2/+4
From Maxime Ripard: Sunxi dt fixes for 3.8-rc's * tag 'sunxi-fixes-for-3.8-rc4' of git://github.com/mripard/linux: ARM: sunxi: Use the Synosys APB UART instead of ns8250
2013-01-17lockdep, rwsem: fix down_write_nest_lock() if !CONFIG_DEBUG_LOCK_ALLOCJiri Kosina1-1/+1
Commit 1b963c81b145 ("lockdep, rwsem: provide down_write_nest_lock()") contains a bug in a codepath when CONFIG_DEBUG_LOCK_ALLOC is disabled, which causes down_read() to be called instead of down_write() by mistake on such configurations. Fix that. Reported-and-tested-by: Andrew Clayton <andrew@digital-domain.net> Reported-and-tested-by: Zlatko Calusic <zlatko.calusic@iskon.hr> Signed-off-by: Jiri Kosina <jkosina@suse.cz> Reviewed-by: Rik van Riel <riel@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-01-16Merge tag 'sound-3.8' of ↵Linus Torvalds10-13/+181
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound Pull second round of sound fixes from Takashi Iwai: "Yet a few more fixes popped up in this week. The biggest change here is the addition of pinctrl support for Atmel, which turned out to be almost mandatory to make things working. The rest are a few fixes for M-Audio usb-audio device and a fix for regression of HD-audio HDMI codecs with alsactl in the recent kernel." * tag 'sound-3.8' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: ALSA: hda/hdmi - Work around "alsactl restore" errors ALSA: usb-audio: selector map for M-Audio FT C400 ALSA: usb-audio: M-Audio FT C400 skip packet quirk ALSA: usb-audio: correct M-Audio C400 clock source quirk ALSA: usb - fix race in creation of M-Audio Fast track pro driver ASoC: atmel-ssc: add pinctrl selection to driver ARM: at91/dts: add pinctrl support for SSC peripheral
2013-01-16Merge git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pendingLinus Torvalds6-10/+29
Pull scsi target fixes from Nicholas Bellinger: "This includes an important >= v3.6 regression bugfix for active I/O shutdown (Roland), some TMR related failure / corner cases fixes for long outstanding I/O (Roland), two FCoE target mode fabric fabric role fixes (MDR), a fix for an incorrect sense code during LUN communication failure (Dr. Hannes), plus a handful of other minor fixes. There are still some outstanding zero-length control CDB regression fixes that need to be addressed for v3.8, that will be coming in a follow-up PULL request." * git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending: iscsi-target: Fix CmdSN comparison (use cmd->cmd_sn instead of cmd->stat_sn) target: Release se_cmd when LUN lookup fails for TMR target: Fix use-after-free in LUN RESET handling target: Fix missing CMD_T_ACTIVE bit regression for pending WRITEs tcm_fc: Do not report target role when target is not defined tcm_fc: Do not indicate retry capability to initiators target: Use TCM_NO_SENSE for initialisation target: Introduce TCM_NO_SENSE target: use correct sense code for LUN communication failure
2013-01-16Merge branch 'for_linus' of ↵Linus Torvalds2-2/+4
git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs Pull ext3 and udf fixes from Jan Kara: "One ext3 performance regression fix and one udf regression fix (oops on interrupted mount)." * 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs: UDF: Fix a null pointer dereference in udf_sb_free_partitions jbd: don't wake kjournald unnecessarily
2013-01-16Merge git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds1-0/+2
Pull s390 KVM fix from Gleb Natapov. * git://git.kernel.org/pub/scm/virt/kvm/kvm: s390/kvm: Fix BUG in include/linux/kvm_host.h:745
generated by cgit v1.2.3 (git 2.39.0) at 2024-09-22 01:51:29 +0300