summaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2017-11-04Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller12703-311/+13121
Files removed in 'net-next' had their license header updated in 'net'. We take the remove from 'net-next'. Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-04liquidio: Fix an issue with multiple switchdev enable disablesVijaya Mohan Guvva3-2/+9
Return success if the same dispatch function is being registered for a given opcode and subcode, there by allow multiple switchdev enable and disables. Signed-off-by: Vijaya Mohan Guvva <vijaya.guvva@cavium.com> Signed-off-by: Satanand Burla <satananda.burla@cavium.com> Signed-off-by: Felix Manlunas <felix.manlunas@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-04Merge branch 'mlxsw-Handle-changes-in-GRE-configuration'David S. Miller6-175/+614
Jiri Pirko says: ==================== mlxsw: Handle changes in GRE configuration Petr says: Until now, when an IP tunnel was offloaded by the mlxsw driver, the offload was pretty much static, and changes in Linux configuration were not reflected in the hardware. That led to discrepancies between traffic flows in slow path and fast path. The work-around used to be to remove all routes that forward to the netdevice and re-add them. This is clearly suboptimal, but actually, as of the decap-only patchset, it's not even enough anymore, and one needs to go all the way and simply drop the tunnel and recreate it correctly. With this patchset, the NETDEV_CHANGE events that are generated for changes of up'd tunnel netdevices are captured and interpreted to correctly reconfigure the HW in accordance with changes requested at the software layer. In addition, NETDEV_CHANGEUPPER, NETDEV_UP and NETDEV_DOWN are now handled not only for tunnel devices themselves, but also for their bound devices. Each change is then translated to one or more of the following updates to the HW configuration: - refresh of offload of local route that corresponds to tunnel's local address - refresh of the loopback RIF - refresh of offloads of routes that forward to the changed tunnel - removal of tunnel offloads These tools are used to implement the following configuration changes: - addition of a new offloadable tunnel with local address that conflicts with that of an already-offloaded tunnel (the existing tunnel is onloaded, the new one isn't offloaded) - changes to TTL, TOS that make tunnel unsuitable for offloading - changes to ikey, okey, remote - changes to local, which when they cause conflict with another tunnel, lead to onloading of both newly-conflicting tunnels - migration of a bound device of an offloaded tunnel device to a different VRF - changes to what device is bound to a tunnel device (i.e. like what "ip tunnel change name g dev another" does) - changes to up / down state of a bound device. A down bound device doesn't forward encapsulated traffic anymore, but decap still works. This patchset starts with a suite of patches that adapt the existing code base step by step to facilitate introduction of the offloading code. The five substantial patches at the end then implement the changes mentioned above. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-04mlxsw: spectrum_router: Handle down of tunnel underlayPetr Machata1-2/+55
When the bound device of a tunnel device is down, encapsulated packets are not egressed anymore, but tunnel decap still works. Extend mlxsw_sp_nexthop_rif_update() to take IFF_UP into consideration when deciding whether a given next hop should be offloaded. Because the new logic was added to mlxsw_sp_nexthop_rif_update(), this fixes the case where a newly-added tunnel has a down bound device, which would previously be fully offloaded. Now the down state of the bound device is noted and next hops forwarding to such tunnel are not offloaded. In addition to that, notice NETDEV_UP and NETDEV_DOWN of a bound device to force refresh of tunnel encap route offloads. Signed-off-by: Petr Machata <petrm@mellanox.com> Reviewed-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-04mlxsw: spectrum_ipip: Handle underlay device changePetr Machata1-2/+3
When a bound device of an IP-in-IP tunnel changes, such as through 'ip tunnel change name $name dev $dev', the loopback backing the tunnel needs to be recreated. Signed-off-by: Petr Machata <petrm@mellanox.com> Reviewed-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-04mlxsw: spectrum: Handle NETDEV_CHANGE on L3 tunnelsPetr Machata4-7/+114
Changes to L3 tunnel netdevices (through `ip tunnel change' as well as `ip link set') lead to NETDEV_CHANGE being generated on the tunnel device. Because what is relevant for the tunnel in question depends on the tunnel type, handling of the event is dispatched to the IPIP module through a newly-added interface mlxsw_sp_ipip_ops.ol_netdev_change(). IPIP tunnels now remember the last set of tunnel parameters in struct mlxsw_sp_ipip_entry.parms, and use it to figure out what exactly has changed. Signed-off-by: Petr Machata <petrm@mellanox.com> Reviewed-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-04mlxsw: spectrum: Support IPIP underlay VRF migrationPetr Machata3-0/+110
When a bound device of a tunnel netdevice changes VRF, the loopback RIF that backs the tunnel needs to be updated and existing encapsulating routes need to be refreshed. Note that several tunnels can share the same bound device, in which case all the impacted tunnels need to be updated. Signed-off-by: Petr Machata <petrm@mellanox.com> Reviewed-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-04mlxsw: spectrum_router: Onload conflicting tunnelsPetr Machata2-21/+60
The approach for offloading IP tunnels implemented currently by mlxsw doesn't allow two tunnels that have the same local IP address in the same (underlay) VRF. Previously, offloads were introduced on demand as encap routes were formed. When such a route was created that would cause offload of a conflicting tunnel, mlxsw_sp_ipip_entry_create() would detect it and return -EEXIST, which would propagate up and cause FIB abort. Now however IPIP entries are created as soon as an offloadable netdevice is created, and the failure prevents creation of such device. Furthermore, if the driver is installed at the point where such conflicting tunnels exist, the failure actually prevents successful modprobe. Furthermore, follow-up patches implement handling of NETDEV_CHANGE due to the local address change. However, NETDEV_CHANGE can't be vetoed. The failure merely means that the offloads weren't updated, but the change in Linux configuration is not rolled back. It is thus desirable to have a robust way of handling these conflicts, which can later be reused for handling NETDEV_CHANGE as well. To fix this, when a conflicting tunnel is created, instead of failing, simply pull the old tunnel to slow path and reject offloading the new one. Introduce two functions: mlxsw_sp_ipip_entry_demote_tunnel() and mlxsw_sp_ipip_demote_tunnel_by_saddr() to handle this. Make them both public, because they will be useful later on in this patchset. Signed-off-by: Petr Machata <petrm@mellanox.com> Reviewed-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-04mlxsw: spectrum_router: Fix saddr deduction in mlxsw_sp_ipip_entry_create()Petr Machata1-2/+2
When trying to determine whether there are other offloaded tunnels with the same local address, mlxsw_sp_ipip_entry_create() should look for a tunnel with matching UL protocol, matching saddr, in the same VRF. However instead of taking into account the UL protocol of the tunnel netdevice (which mlxsw_sp_ipip_entry_saddr_matches() then compares to the UL protocol of inspected IPIP entry), it deduces the UL protocol from the inspected IPIP entry (and that's compared to itself). This is currently immaterial, because only one tunnel type is offloaded, and therefore the UL protocol always matches, but introducing support for a tunnel with IPv6 underlay would uncover this error. Signed-off-by: Petr Machata <petrm@mellanox.com> Reviewed-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-04mlxsw: spectrum_router: Generalize __mlxsw_sp_ipip_entry_update_tunnel()Petr Machata2-4/+50
The work that needs to be done to update HW configuration in response to changes is similar to what __mlxsw_sp_ipip_entry_update_tunnel() already does, but with a number of twists: each change requires a different subset of things to happen. Extend the function to support all these uses, and allow finely-grained configuration of what should happen at each call through a suite of function arguments. Publish the updated function to allow use from the spectrum_ipip module. Signed-off-by: Petr Machata <petrm@mellanox.com> Reviewed-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-04mlxsw: spectrum_router: Extract __mlxsw_sp_ipip_entry_update_tunnel()Petr Machata1-28/+46
The work that's done by mlxsw_sp_netdevice_ipip_ol_vrf_event() is a good basis for a more versatile function that would take care of all sorts of tunnel updates requests: __mlxsw_sp_ipip_entry_update_tunnel(). Extract that function. Factor out a helper mlxsw_sp_ipip_entry_ol_lb_update() as well. Signed-off-by: Petr Machata <petrm@mellanox.com> Reviewed-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-04mlxsw: spectrum: Propagate extack for tunnel eventsPetr Machata2-17/+23
The function mlxsw_sp_rif_create() takes an extack parameter. So far, for creation of loopback interfaces, NULL was passed. For some events however the extack can be extracted and passed along. So do that for NETDEV_CHANGEUPPER handler. Use the opportunity to update the type of info argument that mlxsw_sp_netdevice_ipip_ol_event() takes. Follow-up patches will introduce handling of more changes, and some of them carry an extack as well, but in an info structure of a different type. Though not strictly erroneous (the pointer could be cast whichever way), it makes no sense to pretend the value is always of a certain type, when in fact it isn't. So change the prototype of the above-mentioned function as well. Signed-off-by: Petr Machata <petrm@mellanox.com> Reviewed-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-04mlxsw: spectrum_router: Extract mlxsw_sp_ipip_entry_ol_up_event()Petr Machata1-9/+14
The piece of logic to promote decap route, if any, is useful for generic tunnel updates, not just for handling of NETDEV_UP events on tunnel interfaces. Extract it to a separate function. Signed-off-by: Petr Machata <petrm@mellanox.com> Reviewed-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-04mlxsw: spectrum_router: Make mlxsw_sp_netdevice_ipip_ol_up_event() voidPetr Machata1-4/+4
This function only ever returns 0, so don't pretend it returns anything useful and just make it void. Signed-off-by: Petr Machata <petrm@mellanox.com> Reviewed-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-04mlxsw: spectrum_router: Extract mlxsw_sp_ipip_entry_ol_down_event()Petr Machata1-2/+10
Signed-off-by: Petr Machata <petrm@mellanox.com> Reviewed-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-04mlxsw: spectrum_ipip: Split accessor functionsPetr Machata2-33/+70
To implement NETDEV_CHANGE notifications on IP-in-IP tunnels, the handler needs to figure out what actually changed, to understand how exactly to update the offloads. It will do so by storing struct ip_tunnel_parm with previous configuration, and comparing that to the new version. To facilitate these comparisons, extract the code that operates on struct ip_tunnel_parm from the existing accessor functions, and make those a thin wrapper that extracts tunnel parameters and dispatches. Signed-off-by: Petr Machata <petrm@mellanox.com> Reviewed-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-04mlxsw: spectrum: Move mlxsw_sp_ipip_netdev_{s, d}addr{, 4}()Petr Machata4-60/+57
These functions ideologically belong to the IPIP module, and some follow-up work will benefit from their presence there. Signed-off-by: Petr Machata <petrm@mellanox.com> Reviewed-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-04mlxsw: spectrum_router: Extract mlxsw_sp_netdevice_ipip_can_offload()Petr Machata1-5/+15
Some of the code down the road needs this logic as well. Signed-off-by: Petr Machata <petrm@mellanox.com> Reviewed-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-04mlxsw: spectrum: Rename IPIP-related netdevice handlersPetr Machata3-30/+32
To distinguish between events related to tunnel device itself and its bound device, rename a number of functions related to handling tunneling netdevice events to include _ol_ (for "overlay") in the name. That leaves room in the namespace for underlay-related functions, which would have _ul_ in the name. Signed-off-by: Petr Machata <petrm@mellanox.com> Reviewed-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-03Merge tag 'clk-fixes-for-linus' of ↵Linus Torvalds1-3/+3
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux Pull clk fix from Stephen Boyd: "One fix for USB clks on Uniphier PXs3 SoCs" * tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: clk: uniphier: fix clock data for PXs3
2017-11-03Merge git://git.kernel.org/pub/scm/linux/kernel/git/cmetcalf/linux-tileLinus Torvalds2-0/+3
Pull arch/tile fixes from Chris Metcalf: "Two one-line bug fixes" * git://git.kernel.org/pub/scm/linux/kernel/git/cmetcalf/linux-tile: arch/tile: Implement ->set_state_oneshot_stopped() tile: pass machine size to sparse
2017-11-03Merge tag 'scsi-fixes' of ↵Linus Torvalds1-0/+1
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi Pull SCSI fix from James Bottomley: "One minor fix in the error leg of the qla2xxx driver (it oopses the system if we get an error trying to start the internal kernel thread). The fix is minor because the problem isn't often encountered in the field (although it can be induced by inserting the module in a low memory environment)" * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: scsi: qla2xxx: Fix oops in qla2x00_probe_one error path
2017-11-03arch/tile: Implement ->set_state_oneshot_stopped()Chris Metcalf1-0/+1
set_state_oneshot_stopped() is called by the clkevt core, when the next event is required at an expiry time of 'KTIME_MAX'. This normally happens with NO_HZ_{IDLE|FULL} in both LOWRES/HIGHRES modes. This patch makes the clockevent device to stop on such an event, to avoid spurious interrupts, as explained by: commit 8fff52fd5093 ("clockevents: Introduce CLOCK_EVT_STATE_ONESHOT_STOPPED state"). Signed-off-by: Chris Metcalf <cmetcalf@mellanox.com>
2017-11-03Merge tag 'powerpc-4.14-6' of ↵Linus Torvalds5-13/+26
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux Pull powerpc fixes from Michael Ellerman: "Some more powerpc fixes for 4.14. This is bigger than I like to send at rc7, but that's at least partly because I didn't send any fixes last week. If it wasn't for the IMC driver, which is new and getting heavy testing, the diffstat would look a bit better. I've also added ftrace on big endian to my test suite, so we shouldn't break that again in future. - A fix to the handling of misaligned paste instructions (P9 only), where a change to a #define has caused the check for the instruction to always fail. - The preempt handling was unbalanced in the radix THP flush (P9 only). Though we don't generally use preempt we want to keep it working as much as possible. - Two fixes for IMC (P9 only), one when booting with restricted number of CPUs and one in the error handling when initialisation fails due to firmware etc. - A revert to fix function_graph on big endian machines, and then a rework of the reverted patch to fix kprobes blacklist handling on big endian machines. Thanks to: Anju T Sudhakar, Guilherme G. Piccoli, Madhavan Srinivasan, Naveen N. Rao, Nicholas Piggin, Paul Mackerras" * tag 'powerpc-4.14-6' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: powerpc/perf: Fix core-imc hotplug callback failure during imc initialization powerpc/kprobes: Dereference function pointers only if the address does not belong to kernel text Revert "powerpc64/elfv1: Only dereference function descriptor for non-text symbols" powerpc/64s/radix: Fix preempt imbalance in TLB flush powerpc: Fix check for copy/paste instructions in alignment handler powerpc/perf: Fix IMC allocation routine
2017-11-03Merge tag 'mmc-v4.14-rc4-3' of ↵Linus Torvalds1-13/+94
git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc Pull MMC fixes from Ulf Hansson: "Fix dw_mmc request timeout issues" * tag 'mmc-v4.14-rc4-3' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc: mmc: dw_mmc: Fix the DTO timeout calculation mmc: dw_mmc: Add locking to the CTO timer mmc: dw_mmc: Fix the CTO timeout calculation mmc: dw_mmc: cancel the CTO timer after a voltage switch
2017-11-03Merge tag 'drm-fixes-for-v4.14-rc8' of ↵Linus Torvalds10-44/+70
git://people.freedesktop.org/~airlied/linux Pull drm fixes from Dave Airlie: - one nouveau regression fix - some amdgpu fixes for stable to fix hangs on some harvested Polaris GPUs - a set of KASAN and regression fixes for i915, their CI system seems to be working pretty well now. * tag 'drm-fixes-for-v4.14-rc8' of git://people.freedesktop.org/~airlied/linux: drm/amdgpu: allow harvesting check for Polaris VCE drm/amdgpu: return -ENOENT from uvd 6.0 early init for harvesting drm/i915: Check incoming alignment for unfenced buffers (on i915gm) drm/nouveau/kms/nv50: use the correct state for base channel notifier setup drm/i915: Hold rcu_read_lock when iterating over the radixtree (vma idr) drm/i915: Hold rcu_read_lock when iterating over the radixtree (objects) drm/i915/edp: read edp display control registers unconditionally drm/i915: Do not rely on wm preservation for ILK watermarks drm/i915: Cancel the modeset retry work during modeset cleanup
2017-11-03Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds27-50/+60
Pull networking fixes from David Miller: "Hopefully this is the last batch of networking fixes for 4.14 Fingers crossed... 1) Fix stmmac to use the proper sized OF property read, from Bhadram Varka. 2) Fix use after free in net scheduler tc action code, from Cong Wang. 3) Fix SKB control block mangling in tcp_make_synack(). 4) Use proper locking in fib_dump_info(), from Florian Westphal. 5) Fix IPG encodings in systemport driver, from Florian Fainelli. 6) Fix division by zero in NV TCP congestion control module, from Konstantin Khlebnikov. 7) Fix use after free in nf_reject_ipv4, from Tejaswi Tanikella" * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: net: systemport: Correct IPG length settings tcp: do not mangle skb->cb[] in tcp_make_synack() fib: fib_dump_info can no longer use __in_dev_get_rtnl stmmac: use of_property_read_u32 instead of read_u8 net_sched: hold netns refcnt for each action net_sched: acquire RTNL in tc_action_net_exit() net: vrf: correct FRA_L3MDEV encode type tcp_nv: fix division by zero in tcpnv_acked() netfilter: nf_reject_ipv4: Fix use-after-free in send_reset netfilter: nft_set_hash: disable fast_ops for 2-len keys
2017-11-03Merge branch 'akpm' (patches from Andrew)Linus Torvalds8-20/+86
Merge misc fixes from Andrew Morton: "7 fixes" * emailed patches from Andrew Morton <akpm@linux-foundation.org>: mm, swap: fix race between swap count continuation operations mm/huge_memory.c: deposit page table when copying a PMD migration entry initramfs: fix initramfs rebuilds w/ compression after disabling fs/hugetlbfs/inode.c: fix hwpoison reserve accounting ocfs2: fstrim: Fix start offset of first cluster group during fstrim mm, /proc/pid/pagemap: fix soft dirty marking for PMD migration entry userfaultfd: hugetlbfs: prevent UFFDIO_COPY to fill beyond the end of i_size
2017-11-03Update MIPS email addressesPaul Burton46-49/+52
MIPS will soon not be a part of Imagination Technologies, and as such many @imgtec.com email addresses will no longer be valid. This patch updates the addresses for those who: - Have 10 or more patches in mainline authored using an @imgtec.com email address, or any patches dated within the past year. - Are still with Imagination but leaving as part of the MIPS business unit, as determined from an internal email address list. - Haven't already updated their email address (ie. JamesH) or expressed a desire to be excluded (ie. Maciej). - Acked v2 or earlier of this patch, which leaves Deng-Cheng, Matt & myself. New addresses are of the form firstname.lastname@mips.com, and all verified against an internal email address list. An entry is added to .mailmap for each person such that get_maintainer.pl will report the new addresses rather than @imgtec.com addresses which will soon be dead. Instances of the affected addresses throughout the tree are then mechanically replaced with the new @mips.com address. Signed-off-by: Paul Burton <paul.burton@mips.com> Cc: Deng-Cheng Zhu <dengcheng.zhu@imgtec.com> Cc: Deng-Cheng Zhu <dengcheng.zhu@mips.com> Acked-by: Dengcheng Zhu <dengcheng.zhu@mips.com> Cc: Matt Redfearn <matt.redfearn@imgtec.com> Cc: Matt Redfearn <matt.redfearn@mips.com> Acked-by: Matt Redfearn <matt.redfearn@mips.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: linux-kernel@vger.kernel.org Cc: linux-mips@linux-mips.org Cc: trivial@kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-11-03x86: CPU: Fix up "cpu MHz" in /proc/cpuinfoRafael J. Wysocki3-6/+11
Commit 890da9cf0983 (Revert "x86: do not use cpufreq_quick_get() for /proc/cpuinfo "cpu MHz"") is not sufficient to restore the previous behavior of "cpu MHz" in /proc/cpuinfo on x86 due to some changes made after the commit it has reverted. To address this, make the code in question use arch_freq_get_on_cpu() which also is used by cpufreq for reporting the current frequency of CPUs and since that function doesn't really depend on cpufreq in any way, drop the CONFIG_CPU_FREQ dependency for the object file containing it. Also refactor arch_freq_get_on_cpu() somewhat to avoid IPIs and return cached values right away if it is called very often over a short time (to prevent user space from triggering IPI storms through it). Fixes: 890da9cf0983 (Revert "x86: do not use cpufreq_quick_get() for /proc/cpuinfo "cpu MHz"") Cc: stable@kernel.org # 4.13 - together with 890da9cf0983 Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-11-03mm, swap: fix race between swap count continuation operationsHuang Ying2-6/+21
One page may store a set of entries of the sis->swap_map (swap_info_struct->swap_map) in multiple swap clusters. If some of the entries has sis->swap_map[offset] > SWAP_MAP_MAX, multiple pages will be used to store the set of entries of the sis->swap_map. And the pages are linked with page->lru. This is called swap count continuation. To access the pages which store the set of entries of the sis->swap_map simultaneously, previously, sis->lock is used. But to improve the scalability of __swap_duplicate(), swap cluster lock may be used in swap_count_continued() now. This may race with add_swap_count_continuation() which operates on a nearby swap cluster, in which the sis->swap_map entries are stored in the same page. The race can cause wrong swap count in practice, thus cause unfreeable swap entries or software lockup, etc. To fix the race, a new spin lock called cont_lock is added to struct swap_info_struct to protect the swap count continuation page list. This is a lock at the swap device level, so the scalability isn't very well. But it is still much better than the original sis->lock, because it is only acquired/released when swap count continuation is used. Which is considered rare in practice. If it turns out that the scalability becomes an issue for some workloads, we can split the lock into some more fine grained locks. Link: http://lkml.kernel.org/r/20171017081320.28133-1-ying.huang@intel.com Fixes: 235b62176712 ("mm/swap: add cluster lock") Signed-off-by: "Huang, Ying" <ying.huang@intel.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Shaohua Li <shli@kernel.org> Cc: Tim Chen <tim.c.chen@intel.com> Cc: Michal Hocko <mhocko@suse.com> Cc: Aaron Lu <aaron.lu@intel.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Hugh Dickins <hughd@google.com> Cc: <stable@vger.kernel.org> [4.11+] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-11-03mm/huge_memory.c: deposit page table when copying a PMD migration entryZi Yan1-0/+3
We need to deposit pre-allocated PTE page table when a PMD migration entry is copied in copy_huge_pmd(). Otherwise, we will leak the pre-allocated page and cause a NULL pointer dereference later in zap_huge_pmd(). The missing counters during PMD migration entry copy process are added as well. The bug report is here: https://lkml.org/lkml/2017/10/29/214 Link: http://lkml.kernel.org/r/20171030144636.4836-1-zi.yan@sent.com Fixes: 84c3fc4e9c563 ("mm: thp: check pmd migration entry in common path") Signed-off-by: Zi Yan <zi.yan@cs.rutgers.edu> Reported-by: Fengguang Wu <fengguang.wu@intel.com> Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-11-03initramfs: fix initramfs rebuilds w/ compression after disablingFlorian Fainelli1-4/+5
This is a follow-up to commit 57ddfdaa9a72 ("initramfs: fix disabling of initramfs (and its compression)"). This particular commit fixed the use case where we build the kernel with an initramfs with no compression, and then we build the kernel with no initramfs. Now this still left us with the same case as described here: http://lkml.kernel.org/r/20170521033337.6197-1-f.fainelli@gmail.com not working with initramfs compression. This can be seen by the following steps/timestamps: https://www.spinics.net/lists/kernel/msg2598153.html .initramfs_data.cpio.gz.cmd is correct: cmd_usr/initramfs_data.cpio.gz := /bin/bash ./scripts/gen_initramfs_list.sh -o usr/initramfs_data.cpio.gz -u 1000 -g 1000 /home/fainelli/work/uclinux-rootfs/romfs /home/fainelli/work/uclinux-rootfs/misc/initramfs.dev and was generated the first time we did generate the gzip initramfs, so the command has not changed, nor its arguments, so we just don't call it, no initramfs cpio is re-generated as a consequence. The fix for this problem is just to properly keep track of the .initramfs_cpio_data.d file by suffixing it with the compression extension. This takes care of properly tracking dependencies such that the initramfs get (re)generated any time files are added/deleted etc. Link: http://lkml.kernel.org/r/20170930033936.6722-1-f.fainelli@gmail.com Fixes: db2aa7fd15e8 ("initramfs: allow again choice of the embedded initramfs compression algorithm") Fixes: 9e3596b0c653 ("kbuild: initramfs cleanup, set target from Kconfig") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Cc: "Francisco Blas Izquierdo Riera (klondike)" <klondike@xiscosoft.net> Cc: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-11-03fs/hugetlbfs/inode.c: fix hwpoison reserve accountingMike Kravetz1-1/+4
Calling madvise(MADV_HWPOISON) on a hugetlbfs page will result in bad (negative) reserved huge page counts. This may not happen immediately, but may happen later when the underlying file is removed or filesystem unmounted. For example: AnonHugePages: 0 kB ShmemHugePages: 0 kB HugePages_Total: 1 HugePages_Free: 0 HugePages_Rsvd: 18446744073709551615 HugePages_Surp: 0 Hugepagesize: 2048 kB In routine hugetlbfs_error_remove_page(), hugetlb_fix_reserve_counts is called after remove_huge_page. hugetlb_fix_reserve_counts is designed to only be called/used only if a failure is returned from hugetlb_unreserve_pages. Therefore, call hugetlb_unreserve_pages as required and only call hugetlb_fix_reserve_counts in the unlikely event that hugetlb_unreserve_pages returns an error. Link: http://lkml.kernel.org/r/20171019230007.17043-2-mike.kravetz@oracle.com Fixes: 78bb920344b8 ("mm: hwpoison: dissolve in-use hugepage in unrecoverable memory error") Signed-off-by: Mike Kravetz <mike.kravetz@oracle.com> Acked-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: Aneesh Kumar <aneesh.kumar@linux.vnet.ibm.com> Cc: Anshuman Khandual <khandual@linux.vnet.ibm.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-11-03ocfs2: fstrim: Fix start offset of first cluster group during fstrimAshish Samant1-6/+18
The first cluster group descriptor is not stored at the start of the group but at an offset from the start. We need to take this into account while doing fstrim on the first cluster group. Otherwise we will wrongly start fstrim a few blocks after the desired start block and the range can cross over into the next cluster group and zero out the group descriptor there. This can cause filesytem corruption that cannot be fixed by fsck. Link: http://lkml.kernel.org/r/1507835579-7308-1-git-send-email-ashish.samant@oracle.com Signed-off-by: Ashish Samant <ashish.samant@oracle.com> Reviewed-by: Junxiao Bi <junxiao.bi@oracle.com> Reviewed-by: Joseph Qi <jiangqi903@gmail.com> Cc: Mark Fasheh <mfasheh@versity.com> Cc: Joel Becker <jlbec@evilplan.org> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-11-03mm, /proc/pid/pagemap: fix soft dirty marking for PMD migration entryHuang Ying1-1/+5
When the pagetable is walked in the implementation of /proc/<pid>/pagemap, pmd_soft_dirty() is used for both the PMD huge page map and the PMD migration entries. That is wrong, pmd_swp_soft_dirty() should be used for the PMD migration entries instead because the different page table entry flag is used. As a result, /proc/pid/pagemap may report incorrect soft dirty information for PMD migration entries. Link: http://lkml.kernel.org/r/20171017081818.31795-1-ying.huang@intel.com Fixes: 84c3fc4e9c56 ("mm: thp: check pmd migration entry in common path") Signed-off-by: "Huang, Ying" <ying.huang@intel.com> Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Acked-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Cc: Michal Hocko <mhocko@suse.com> Cc: David Rientjes <rientjes@google.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Hugh Dickins <hughd@google.com> Cc: "Jérôme Glisse" <jglisse@redhat.com> Cc: Daniel Colascione <dancol@google.com> Cc: Zi Yan <zi.yan@cs.rutgers.edu> Cc: Anshuman Khandual <khandual@linux.vnet.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-11-03userfaultfd: hugetlbfs: prevent UFFDIO_COPY to fill beyond the end of i_sizeAndrea Arcangeli1-2/+30
This oops: kernel BUG at fs/hugetlbfs/inode.c:484! RIP: remove_inode_hugepages+0x3d0/0x410 Call Trace: hugetlbfs_setattr+0xd9/0x130 notify_change+0x292/0x410 do_truncate+0x65/0xa0 do_sys_ftruncate.constprop.3+0x11a/0x180 SyS_ftruncate+0xe/0x10 tracesys+0xd9/0xde was caused by the lack of i_size check in hugetlb_mcopy_atomic_pte. mmap() can still succeed beyond the end of the i_size after vmtruncate zapped vmas in those ranges, but the faults must not succeed, and that includes UFFDIO_COPY. We could differentiate the retval to userland to represent a SIGBUS like a page fault would do (vs SIGSEGV), but it doesn't seem very useful and we'd need to pick a random retval as there's no meaningful syscall retval that would differentiate from SIGSEGV and SIGBUS, there's just -EFAULT. Link: http://lkml.kernel.org/r/20171016223914.2421-2-aarcange@redhat.com Signed-off-by: Andrea Arcangeli <aarcange@redhat.com> Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com> Cc: Mike Rapoport <rppt@linux.vnet.ibm.com> Cc: "Dr. David Alan Gilbert" <dgilbert@redhat.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-11-03Merge branch 'net-mini_Qdisc'David S. Miller7-60/+166
Jiri Pirko says: ==================== net: core: introduce mini_Qdisc and eliminate usage of tp->q for clsact fastpath This patchset's main patch is patch number 2. It carries the description. Patch 1 is just a dependency. --- v3->v4: - rebased to be applicable on top of the current net-next v2->v3: - Using head change callback to replace miniq pointer every time tp head changes. This eliminates one rcu dereference and makes the claim "without added overhead" valid. v1->v2: - Use dev instead of skb->dev in sch_handle_egress as pointed out by Daniel - Fixed synchronize_rcu_bh() in mini_qdisc_disable and commented ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-03net: core: introduce mini_Qdisc and eliminate usage of tp->q for clsact fastpathJiri Pirko5-18/+109
In sch_handle_egress and sch_handle_ingress tp->q is used only in order to update stats. So stats and filter list are the only things that are needed in clsact qdisc fastpath processing. Introduce new mini_Qdisc struct to hold those items. Also, introduce a helper to swap the mini_Qdisc structures in case filter list head changes. This removes need for tp->q usage without added overhead. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-03net: sched: introduce chain_head_change callbackJiri Pirko4-47/+62
Add a callback that is to be called whenever head of the chain changes. Also provide a callback for the default case when the caller gets a block using non-extended getter. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-03Merge branch 'hns3-ethtool-ksettings'David S. Miller2-22/+59
Lipeng says: ==================== net: hns3: support set_link_ksettings and for nway_reset ethtool command This patch-set adds support for set_link_ksettings && for nway_resets ethtool command and fixes some related ethtool bugs. 1, patch[4/6] adds support for ethtool_ops.set_link_ksettings. 2, patch[5/6] adds support ethtool_ops.for nway_reset. 3, patch[1/6,2/6,3/6,6/6] fix some bugs for getting port information by ethtool command(ethtool ethx). ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-03net: hns3: fix a bug for phy supported feature initializationFuyun Liang1-0/+10
This patch fixes a bug for phy supported feature initialization. Currently, the value of phydev->supported is initialized by kernel. So it includes many features that we do not support, such as SUPPORTED_FIBRE and SUPPORTED_BNC. This patch fixes it. Fixes: 256727d (net: hns3: Add MDIO support to HNS3 Ethernet driver for hip08 SoC) Signed-off-by: Fuyun Liang <liangfuyun1@huawei.com> Signed-off-by: Lipeng <lipeng321@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-03net: hns3: add support for nway_resetFuyun Liang1-0/+18
This patch adds nway_reset support for ethtool cmd. Signed-off-by: Fuyun Liang <liangfuyun1@huawei.com> Signed-off-by: Lipeng <lipeng321@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-03net: hns3: add support for set_link_ksettingsFuyun Liang1-0/+11
This patch adds set_link_ksettings support for ethtool cmd. Signed-off-by: Fuyun Liang <liangfuyun1@huawei.com> Signed-off-by: Lipeng <lipeng321@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-03net: hns3: fix a bug in hns3_driv_to_eth_capsFuyun Liang1-7/+2
The value of link_modes.advertising and the value of link_modes.supported is initialized to zero every time in for loop in hns3_driv_to_eth_caps(). But we just want to set specified bit for them. Initialization is unnecessary. This patch fixes it. Fixes: 496d03e (net: hns3: Add Ethtool support to HNS3 driver) Signed-off-by: Fuyun Liang <liangfuyun1@huawei.com> Signed-off-by: Lipeng <lipeng321@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-03net: hns3: fix for getting advertised_caps in hns3_get_link_ksettingsFuyun Liang1-0/+3
This patch fixes a bug for ethtool's get_link_ksettings(). The advertising for autoneg is always added to advertised_caps whether autoneg is enable or disable. This patch fixes it. Fixes: 496d03e (net: hns3: Add Ethtool support to HNS3 driver) Signed-off-by: Fuyun Liang <liangfuyun1@huawei.com> Signed-off-by: Lipeng <lipeng321@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-03net: hns3: fix for getting autoneg in hns3_get_link_ksettingsFuyun Liang1-15/+15
This patch fixes a bug for ethtool's get_link_ksettings(). When phy exists, we should get autoneg from phy rather than from mac. Because the value of mac.autoneg is invalid when phy exists. Fixes: 496d03e (net: hns3: Add Ethtool support to HNS3 driver) Signed-off-by: Fuyun Liang <liangfuyun1@huawei.com> Signed-off-by: Lipeng <lipeng321@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-03Merge branch 'bnxt_en-next'David S. Miller2-2/+6
Michael Chan says: ==================== bnxt_en: Fix IRQ coalescing regressions. There was a typo and missing guard-rail against illegal values in the recent code clean up. All reported by Andy Gospodarek. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-03bnxt_en: Fix IRQ coalescing regression.Michael Chan1-1/+5
Recent IRQ coalescing clean up has removed a guard-rail for the max DMA buffer coalescing value. This is a 6-bit value and must not be 0. We already have a check for 0 but 64 is equivalent to 0 and will cause non-stop interrupts. Fix it by adding the proper check. Fixes: f8503969d27b ("bnxt_en: Refactor and simplify coalescing code.") Reported-by: Andy Gospodarek <gospo@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-03bnxt_en: fix typo in bnxt_set_coalesceAndy Gospodarek1-1/+1
Recent refactoring of coalesce settings contained a typo that prevents receive settings from being set properly. Fixes: 18775aa8a91f ("bnxt_en: Reorganize the coalescing parameters.") Signed-off-by: Andy Gospodarek <gospo@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>