summaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2023-11-02drm/v3d: update UAPI to match user-space for V3D 7.xIago Toral Quiroga1-0/+5
V3D 7.x takes a new parameter to configure TFU jobs that needs to be provided by user space. Signed-off-by: Iago Toral Quiroga <itoral@igalia.com> Reviewed-by: Maíra Canal <mcanal@igalia.com> Signed-off-by: Maíra Canal <mcanal@igalia.com> Link: https://patchwork.freedesktop.org/patch/msgid/20231031073859.25298-2-itoral@igalia.com
2023-11-02fbdev/simplefb: Add support for generic power-domainsThierry Reding1-0/+93
The simple-framebuffer device tree bindings document the power-domains property, so make sure that simplefb supports it. This ensures that the power domains remain enabled as long as simplefb is active. v2: - remove unnecessary call to simplefb_detach_genpds() since that's already done automatically by devres - fix crash if power-domains property is missing in DT Signed-off-by: Thierry Reding <treding@nvidia.com> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20231101172017.3872242-3-thierry.reding@gmail.com
2023-11-02fbdev/simplefb: Support memory-region propertyThierry Reding1-5/+30
The simple-framebuffer bindings specify that the "memory-region" property can be used as an alternative to the "reg" property to define the framebuffer memory used by the display hardware. Implement support for this in the simplefb driver. Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20231101172017.3872242-2-thierry.reding@gmail.com
2023-11-02drm/sched: Add a helper to queue TDR immediatelyMatthew Brost2-1/+18
Add a helper whereby a driver can invoke TDR immediately. v2: - Drop timeout args, rename function, use mod delayed work (Luben) v3: - s/XE/Xe (Luben) - present tense in commit message (Luben) - Adjust comment for drm_sched_tdr_queue_imm (Luben) v4: - Adjust commit message (Luben) Cc: Luben Tuikov <luben.tuikov@amd.com> Signed-off-by: Matthew Brost <matthew.brost@intel.com> Reviewed-by: Luben Tuikov <luben.tuikov@amd.com> Link: https://lore.kernel.org/r/20231031032439.1558703-6-matthew.brost@intel.com Signed-off-by: Luben Tuikov <ltuikov89@gmail.com>
2023-11-02drm/sched: Add drm_sched_start_timeout_unlocked helperMatthew Brost1-10/+13
Also add a lockdep assert to drm_sched_start_timeout. Signed-off-by: Matthew Brost <matthew.brost@intel.com> Reviewed-by: Luben Tuikov <luben.tuikov@amd.com> Link: https://lore.kernel.org/r/20231031032439.1558703-5-matthew.brost@intel.com Signed-off-by: Luben Tuikov <ltuikov89@gmail.com>
2023-11-02drm/sched: Split free_job into own work itemMatthew Brost2-49/+101
Rather than call free_job and run_job in same work item have a dedicated work item for each. This aligns with the design and intended use of work queues. v2: - Test for DMA_FENCE_FLAG_TIMESTAMP_BIT before setting timestamp in free_job() work item (Danilo) v3: - Drop forward dec of drm_sched_select_entity (Boris) - Return in drm_sched_run_job_work if entity NULL (Boris) v4: - Replace dequeue with peek and invert logic (Luben) - Wrap to 100 lines (Luben) - Update comments for *_queue / *_queue_if_ready functions (Luben) v5: - Drop peek argument, blindly reinit idle (Luben) - s/drm_sched_free_job_queue_if_ready/drm_sched_free_job_queue_if_done (Luben) - Update work_run_job & work_free_job kernel doc (Luben) v6: - Do not move drm_sched_select_entity in file (Luben) Signed-off-by: Matthew Brost <matthew.brost@intel.com> Link: https://lore.kernel.org/r/20231031032439.1558703-4-matthew.brost@intel.com Reviewed-by: Luben Tuikov <ltuikov89@gmail.com> Signed-off-by: Luben Tuikov <ltuikov89@gmail.com>
2023-11-02drm/sched: Convert drm scheduler to use a work queue rather than kthreadMatthew Brost9-81/+86
In Xe, the new Intel GPU driver, a choice has made to have a 1 to 1 mapping between a drm_gpu_scheduler and drm_sched_entity. At first this seems a bit odd but let us explain the reasoning below. 1. In Xe the submission order from multiple drm_sched_entity is not guaranteed to be the same completion even if targeting the same hardware engine. This is because in Xe we have a firmware scheduler, the GuC, which allowed to reorder, timeslice, and preempt submissions. If a using shared drm_gpu_scheduler across multiple drm_sched_entity, the TDR falls apart as the TDR expects submission order == completion order. Using a dedicated drm_gpu_scheduler per drm_sched_entity solve this problem. 2. In Xe submissions are done via programming a ring buffer (circular buffer), a drm_gpu_scheduler provides a limit on number of jobs, if the limit of number jobs is set to RING_SIZE / MAX_SIZE_PER_JOB we get flow control on the ring for free. A problem with this design is currently a drm_gpu_scheduler uses a kthread for submission / job cleanup. This doesn't scale if a large number of drm_gpu_scheduler are used. To work around the scaling issue, use a worker rather than kthread for submission / job cleanup. v2: - (Rob Clark) Fix msm build - Pass in run work queue v3: - (Boris) don't have loop in worker v4: - (Tvrtko) break out submit ready, stop, start helpers into own patch v5: - (Boris) default to ordered work queue v6: - (Luben / checkpatch) fix alignment in msm_ringbuffer.c - (Luben) s/drm_sched_submit_queue/drm_sched_wqueue_enqueue - (Luben) Update comment for drm_sched_wqueue_enqueue - (Luben) Positive check for submit_wq in drm_sched_init - (Luben) s/alloc_submit_wq/own_submit_wq v7: - (Luben) s/drm_sched_wqueue_enqueue/drm_sched_run_job_queue v8: - (Luben) Adjust var names / comments Signed-off-by: Matthew Brost <matthew.brost@intel.com> Reviewed-by: Luben Tuikov <luben.tuikov@amd.com> Link: https://lore.kernel.org/r/20231031032439.1558703-3-matthew.brost@intel.com Signed-off-by: Luben Tuikov <ltuikov89@gmail.com>
2023-11-02drm/sched: Add drm_sched_wqueue_* helpersMatthew Brost6-18/+59
Add scheduler wqueue ready, stop, and start helpers to hide the implementation details of the scheduler from the drivers. v2: - s/sched_wqueue/sched_wqueue (Luben) - Remove the extra white line after the return-statement (Luben) - update drm_sched_wqueue_ready comment (Luben) Cc: Luben Tuikov <luben.tuikov@amd.com> Signed-off-by: Matthew Brost <matthew.brost@intel.com> Reviewed-by: Luben Tuikov <luben.tuikov@amd.com> Link: https://lore.kernel.org/r/20231031032439.1558703-2-matthew.brost@intel.com Signed-off-by: Luben Tuikov <ltuikov89@gmail.com>
2023-11-01dma-buf: add dma_fence_timestamp helperChristian König4-16/+27
When a fence signals there is a very small race window where the timestamp isn't updated yet. sync_file solves this by busy waiting for the timestamp to appear, but on other ocassions didn't handled this correctly. Provide a dma_fence_timestamp() helper function for this and use it in all appropriate cases. Another alternative would be to grab the spinlock when that happens. v2 by teddy: add a wait parameter to wait for the timestamp to show up, in case the accurate timestamp is needed and/or the timestamp is not based on ktime (e.g. hw timestamp) v3 chk: drop the parameter again for unified handling Signed-off-by: Yunxiang Li <Yunxiang.Li@amd.com> Signed-off-by: Christian König <christian.koenig@amd.com> Fixes: 1774baa64f93 ("drm/scheduler: Change scheduled fence track v2") Reviewed-by: Alex Deucher <alexander.deucher@amd.com> CC: stable@vger.kernel.org Link: https://patchwork.freedesktop.org/patch/msgid/20230929104725.2358-1-christian.koenig@amd.com
2023-10-31accel/ivpu: Rename VPU to NPU in product stringsJacek Lawrynowicz2-5/+6
VPU was rebranded as NPU (Neural Processing Unit) so user facing strings have to be updated but the code remains as is and the module is still called intel_vpu.ko. Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com> Reviewed-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com> Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com> Signed-off-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20231028155936.1183342-9-stanislaw.gruszka@linux.intel.com
2023-10-31accel/ivpu: Simplify MMU SYNC commandJacek Lawrynowicz1-4/+1
CMD_SYNC does not need any args as we poll for completion anyway. Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com> Reviewed-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com> Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com> Signed-off-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20231028155936.1183342-8-stanislaw.gruszka@linux.intel.com
2023-10-31accel/ivpu: Make DMA allocations for MMU600 write combinedKarol Wachowski1-52/+63
Previously using dma_alloc_wc() API we created cache coherent (mapped as write-back) mappings. Because we disable MMU600 snooping it was required to do costly page walk and cache flushes after each page table modification. With write-combined buffers it's possible to do a single write memory barrier to flush write-combined buffer to memory which simplifies the driver and significantly reduce time of map/unmap operations. Mapping time of 255 MB is reduced from 2.5 ms to 500 us. Signed-off-by: Karol Wachowski <karol.wachowski@linux.intel.com> Reviewed-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com> Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com> Signed-off-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20231028155936.1183342-7-stanislaw.gruszka@linux.intel.com
2023-10-31accel/ivpu: Print CMDQ errors after consumer timeoutKarol Wachowski1-3/+31
Add checking of error reason bits in IVPU_MMU_CMDQ_CONS register when waiting for consumer timeout occurred. Signed-off-by: Karol Wachowski <karol.wachowski@linux.intel.com> Reviewed-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com> Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com> Signed-off-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20231028155936.1183342-6-stanislaw.gruszka@linux.intel.com
2023-10-31accel/ivpu: Abort pending rx ipc on resetStanislaw Gruszka3-4/+20
Waking up process, which wait for particular condition, will go to sleep again on wake_up() if the condition is not met. Add abort flag to wake up IPC receivers, which will finish with -ECANCELED error. This is only needed for reset, run time power management prevent to suspend VPU when there is pending IPC processing or pending job. Reviewed-by: Karol Wachowski <karol.wachowski@linux.intel.com> Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com> Signed-off-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20231028155936.1183342-5-stanislaw.gruszka@linux.intel.com
2023-10-31accel/ivpu: Stop job_done_thread on suspendStanislaw Gruszka4-6/+35
Stop job_done thread when going to suspend. Use kthread_park() instead of kthread_stop() to avoid memory allocation and potential failure on resume. Use separate function as thread wake up condition. Use spin lock to assure rx_msg_list is properly protected against concurrent access. This avoid race condition when the rx_msg_list list is modified and read in ivpu_ipc_recive() at the same time. Reviewed-by: Karol Wachowski <karol.wachowski@linux.intel.com> Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com> Signed-off-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20231028155936.1183342-4-stanislaw.gruszka@linux.intel.com
2023-10-31accel/ivpu: Assure device is off if power up sequence failStanislaw Gruszka2-14/+18
We should not leave device half enabled if there is failure somewhere it power up sequence. Fix device init and resume paths. Reviewed-by: Karol Wachowski <karol.wachowski@linux.intel.com> Signed-off-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com> Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com> Link: https://patchwork.freedesktop.org/patch/msgid/20231028155936.1183342-3-stanislaw.gruszka@linux.intel.com
2023-10-31accel/ivpu/40xx: Allow to change profiling frequencyKrystian Pradzynski5-0/+76
Profiling freq is a debug firmware feature. It switches default clock to higher resolution for fine-grained and more accurate firmware task profiling. We already configure it during boot up of VPU4. Add debugfs knob and helpers per HW generation that allow to change it. For vpu37xx the implementation is empty as profiling frequency can only be changed on VPU4 or newer. Signed-off-by: Krystian Pradzynski <krystian.pradzynski@linux.intel.com> Reviewed-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com> Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com> Signed-off-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20231028155936.1183342-2-stanislaw.gruszka@linux.intel.com
2023-10-31Revert "drm/omapdrm: Annotate dma-fence critical section in commit path"Tomi Valkeinen1-5/+4
This reverts commit 250aa22920cd5d956a5d3e9c6a43d671c2bae217. The DMA-fence annotations cause a lockdep warning (see below). As per https://patchwork.freedesktop.org/patch/462170/ it sounds like the annotations don't work correctly. ====================================================== WARNING: possible circular locking dependency detected 6.5.0-rc2+ #2 Not tainted ------------------------------------------------------ kmstest/219 is trying to acquire lock: c4705838 (&hdmi->lock){+.+.}-{3:3}, at: hdmi5_bridge_mode_set+0x1c/0x50 but task is already holding lock: c11e1128 (dma_fence_map){++++}-{0:0}, at: omap_atomic_commit_tail+0x14/0xbc which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #2 (dma_fence_map){++++}-{0:0}: __dma_fence_might_wait+0x48/0xb4 dma_resv_lockdep+0x1b8/0x2bc do_one_initcall+0x68/0x3b0 kernel_init_freeable+0x260/0x34c kernel_init+0x14/0x140 ret_from_fork+0x14/0x28 -> #1 (fs_reclaim){+.+.}-{0:0}: fs_reclaim_acquire+0x70/0xa8 __kmem_cache_alloc_node+0x3c/0x368 kmalloc_trace+0x28/0x58 _drm_do_get_edid+0x7c/0x35c hdmi5_bridge_get_edid+0xc8/0x1ac drm_bridge_connector_get_modes+0x64/0xc0 drm_helper_probe_single_connector_modes+0x170/0x528 drm_client_modeset_probe+0x208/0x1334 __drm_fb_helper_initial_config_and_unlock+0x30/0x548 omap_fbdev_client_hotplug+0x3c/0x6c drm_client_register+0x58/0x94 pdev_probe+0x544/0x6b0 platform_probe+0x58/0xbc really_probe+0xd8/0x3fc __driver_probe_device+0x94/0x1f4 driver_probe_device+0x2c/0xc4 __device_attach_driver+0xa4/0x11c bus_for_each_drv+0x84/0xdc __device_attach+0xac/0x20c bus_probe_device+0x8c/0x90 device_add+0x588/0x7e0 platform_device_add+0x110/0x24c platform_device_register_full+0x108/0x15c dss_bind+0x90/0xc0 try_to_bring_up_aggregate_device+0x1e0/0x2c8 __component_add+0xa4/0x174 hdmi5_probe+0x1c8/0x270 platform_probe+0x58/0xbc really_probe+0xd8/0x3fc __driver_probe_device+0x94/0x1f4 driver_probe_device+0x2c/0xc4 __device_attach_driver+0xa4/0x11c bus_for_each_drv+0x84/0xdc __device_attach+0xac/0x20c bus_probe_device+0x8c/0x90 deferred_probe_work_func+0x8c/0xd8 process_one_work+0x2ac/0x6e4 worker_thread+0x30/0x4ec kthread+0x100/0x124 ret_from_fork+0x14/0x28 -> #0 (&hdmi->lock){+.+.}-{3:3}: __lock_acquire+0x145c/0x29cc lock_acquire.part.0+0xb4/0x258 __mutex_lock+0x90/0x950 mutex_lock_nested+0x1c/0x24 hdmi5_bridge_mode_set+0x1c/0x50 drm_bridge_chain_mode_set+0x48/0x5c crtc_set_mode+0x188/0x1d0 omap_atomic_commit_tail+0x2c/0xbc commit_tail+0x9c/0x188 drm_atomic_helper_commit+0x158/0x18c drm_atomic_commit+0xa4/0xe8 drm_mode_atomic_ioctl+0x9a4/0xc38 drm_ioctl+0x210/0x4a8 sys_ioctl+0x138/0xf00 ret_fast_syscall+0x0/0x1c other info that might help us debug this: Chain exists of: &hdmi->lock --> fs_reclaim --> dma_fence_map Possible unsafe locking scenario: CPU0 CPU1 ---- ---- rlock(dma_fence_map); lock(fs_reclaim); lock(dma_fence_map); lock(&hdmi->lock); *** DEADLOCK *** 3 locks held by kmstest/219: #0: f1011de4 (crtc_ww_class_acquire){+.+.}-{0:0}, at: drm_mode_atomic_ioctl+0xf0/0xc38 #1: c47059c8 (crtc_ww_class_mutex){+.+.}-{3:3}, at: modeset_lock+0xf8/0x230 #2: c11e1128 (dma_fence_map){++++}-{0:0}, at: omap_atomic_commit_tail+0x14/0xbc stack backtrace: CPU: 1 PID: 219 Comm: kmstest Not tainted 6.5.0-rc2+ #2 Hardware name: Generic DRA74X (Flattened Device Tree) unwind_backtrace from show_stack+0x10/0x14 show_stack from dump_stack_lvl+0x58/0x70 dump_stack_lvl from check_noncircular+0x164/0x198 check_noncircular from __lock_acquire+0x145c/0x29cc __lock_acquire from lock_acquire.part.0+0xb4/0x258 lock_acquire.part.0 from __mutex_lock+0x90/0x950 __mutex_lock from mutex_lock_nested+0x1c/0x24 mutex_lock_nested from hdmi5_bridge_mode_set+0x1c/0x50 hdmi5_bridge_mode_set from drm_bridge_chain_mode_set+0x48/0x5c drm_bridge_chain_mode_set from crtc_set_mode+0x188/0x1d0 crtc_set_mode from omap_atomic_commit_tail+0x2c/0xbc omap_atomic_commit_tail from commit_tail+0x9c/0x188 commit_tail from drm_atomic_helper_commit+0x158/0x18c drm_atomic_helper_commit from drm_atomic_commit+0xa4/0xe8 drm_atomic_commit from drm_mode_atomic_ioctl+0x9a4/0xc38 drm_mode_atomic_ioctl from drm_ioctl+0x210/0x4a8 drm_ioctl from sys_ioctl+0x138/0xf00 sys_ioctl from ret_fast_syscall+0x0/0x1c Exception stack(0xf1011fa8 to 0xf1011ff0) 1fa0: 00466d58 be9ab510 00000003 c03864bc be9ab510 be9ab4e0 1fc0: 00466d58 be9ab510 c03864bc 00000036 00466ef0 00466fc0 00467020 00466f20 1fe0: b6bc7ef4 be9ab4d0 b6bbbb00 b6cb2cc0 Fixes: 250aa22920cd ("drm/omapdrm: Annotate dma-fence critical section in commit path") Reviewed-by: Aradhya Bhatia <a-bhatia1@ti.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230920-dma-fence-annotation-revert-v1-2-7ebf6f7f5bf6@ideasonboard.com
2023-10-31Revert "drm/tidss: Annotate dma-fence critical section in commit path"Tomi Valkeinen1-4/+0
This reverts commit 4d56a4f08391857ba93465de489707b66adad114. The DMA-fence annotations cause a lockdep warning (see below). As per https://patchwork.freedesktop.org/patch/462170/ it sounds like the annotations don't work correctly. ====================================================== WARNING: possible circular locking dependency detected 6.6.0-rc2+ #1 Not tainted ------------------------------------------------------ kmstest/733 is trying to acquire lock: ffff8000819377f0 (fs_reclaim){+.+.}-{0:0}, at: __kmem_cache_alloc_node+0x58/0x2d4 but task is already holding lock: ffff800081a06aa0 (dma_fence_map){++++}-{0:0}, at: tidss_atomic_commit_tail+0x20/0xc0 [tidss] which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #2 (dma_fence_map){++++}-{0:0}: __dma_fence_might_wait+0x5c/0xd0 dma_resv_lockdep+0x1a4/0x32c do_one_initcall+0x84/0x2fc kernel_init_freeable+0x28c/0x4c4 kernel_init+0x24/0x1dc ret_from_fork+0x10/0x20 -> #1 (mmu_notifier_invalidate_range_start){+.+.}-{0:0}: fs_reclaim_acquire+0x70/0xe4 __kmem_cache_alloc_node+0x58/0x2d4 kmalloc_trace+0x38/0x78 __kthread_create_worker+0x3c/0x150 kthread_create_worker+0x64/0x8c workqueue_init+0x1e8/0x2f0 kernel_init_freeable+0x11c/0x4c4 kernel_init+0x24/0x1dc ret_from_fork+0x10/0x20 -> #0 (fs_reclaim){+.+.}-{0:0}: __lock_acquire+0x1370/0x20d8 lock_acquire+0x1e8/0x308 fs_reclaim_acquire+0xd0/0xe4 __kmem_cache_alloc_node+0x58/0x2d4 __kmalloc_node_track_caller+0x58/0xf0 kmemdup+0x34/0x60 regmap_bulk_write+0x64/0x2c0 tc358768_bridge_pre_enable+0x8c/0x12d0 [tc358768] drm_atomic_bridge_call_pre_enable+0x68/0x80 [drm] drm_atomic_bridge_chain_pre_enable+0x50/0x158 [drm] drm_atomic_helper_commit_modeset_enables+0x164/0x264 [drm_kms_helper] tidss_atomic_commit_tail+0x58/0xc0 [tidss] commit_tail+0xa0/0x188 [drm_kms_helper] drm_atomic_helper_commit+0x1a8/0x1c0 [drm_kms_helper] drm_atomic_commit+0xa8/0xe0 [drm] drm_mode_atomic_ioctl+0x9ec/0xc80 [drm] drm_ioctl_kernel+0xc4/0x170 [drm] drm_ioctl+0x234/0x4b0 [drm] drm_compat_ioctl+0x110/0x12c [drm] __arm64_compat_sys_ioctl+0x128/0x150 invoke_syscall+0x48/0x110 el0_svc_common.constprop.0+0x40/0xe0 do_el0_svc_compat+0x1c/0x38 el0_svc_compat+0x48/0xb4 el0t_32_sync_handler+0xb0/0x138 el0t_32_sync+0x194/0x198 other info that might help us debug this: Chain exists of: fs_reclaim --> mmu_notifier_invalidate_range_start --> dma_fence_map Possible unsafe locking scenario: CPU0 CPU1 ---- ---- rlock(dma_fence_map); lock(mmu_notifier_invalidate_range_start); lock(dma_fence_map); lock(fs_reclaim); *** DEADLOCK *** 3 locks held by kmstest/733: #0: ffff800082e5bba0 (crtc_ww_class_acquire){+.+.}-{0:0}, at: drm_mode_atomic_ioctl+0x118/0xc80 [drm] #1: ffff000004224c88 (crtc_ww_class_mutex){+.+.}-{3:3}, at: modeset_lock+0xdc/0x1a0 [drm] #2: ffff800081a06aa0 (dma_fence_map){++++}-{0:0}, at: tidss_atomic_commit_tail+0x20/0xc0 [tidss] stack backtrace: CPU: 0 PID: 733 Comm: kmstest Not tainted 6.6.0-rc2+ #1 Hardware name: Toradex Verdin AM62 on Verdin Development Board (DT) Call trace: dump_backtrace+0x98/0x118 show_stack+0x18/0x24 dump_stack_lvl+0x60/0xac dump_stack+0x18/0x24 print_circular_bug+0x288/0x368 check_noncircular+0x168/0x17c __lock_acquire+0x1370/0x20d8 lock_acquire+0x1e8/0x308 fs_reclaim_acquire+0xd0/0xe4 __kmem_cache_alloc_node+0x58/0x2d4 __kmalloc_node_track_caller+0x58/0xf0 kmemdup+0x34/0x60 regmap_bulk_write+0x64/0x2c0 tc358768_bridge_pre_enable+0x8c/0x12d0 [tc358768] drm_atomic_bridge_call_pre_enable+0x68/0x80 [drm] drm_atomic_bridge_chain_pre_enable+0x50/0x158 [drm] drm_atomic_helper_commit_modeset_enables+0x164/0x264 [drm_kms_helper] tidss_atomic_commit_tail+0x58/0xc0 [tidss] commit_tail+0xa0/0x188 [drm_kms_helper] drm_atomic_helper_commit+0x1a8/0x1c0 [drm_kms_helper] drm_atomic_commit+0xa8/0xe0 [drm] drm_mode_atomic_ioctl+0x9ec/0xc80 [drm] drm_ioctl_kernel+0xc4/0x170 [drm] drm_ioctl+0x234/0x4b0 [drm] drm_compat_ioctl+0x110/0x12c [drm] __arm64_compat_sys_ioctl+0x128/0x150 invoke_syscall+0x48/0x110 el0_svc_common.constprop.0+0x40/0xe0 do_el0_svc_compat+0x1c/0x38 el0_svc_compat+0x48/0xb4 el0t_32_sync_handler+0xb0/0x138 el0t_32_sync+0x194/0x198 Fixes: 4d56a4f08391 ("drm/tidss: Annotate dma-fence critical section in commit path") Reviewed-by: Aradhya Bhatia <a-bhatia1@ti.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230920-dma-fence-annotation-revert-v1-1-7ebf6f7f5bf6@ideasonboard.com
2023-10-30drm/panfrost: Remove incorrect IS_ERR() checkSteven Price1-10/+2
sg_page_iter_page() doesn't return an error code, so the IS_ERR() check is wrong and the error path will never be executed. This also allows simplifying the code to remove the local variable 'page'. CC: Adrián Larumbe <adrian.larumbe@collabora.com> Reported-by: Dan Carpenter <dan.carpenter@linaro.org> Closes: https://lore.kernel.org/r/376713ff-9a4f-4ea3-b097-fb5efb685d95@moroto.mountain Signed-off-by: Steven Price <steven.price@arm.com> Reviewed-by: Adrián Larumbe <adrian.larumbe@collabora.com> Tested-by: Adrián Larumbe <adrian.larumbe@collabora.com> Link: https://patchwork.freedesktop.org/patch/msgid/20231020104405.53992-1-steven.price@arm.com
2023-10-30drm/v3d: wait for all jobs to finish before unregisteringMaíra Canal1-0/+2
Currently, we are only warning the user if the BIN or RENDER jobs don't finish before we unregister V3D. We must wait for all jobs to finish before unregistering. Therefore, warn the user if TFU or CSD jobs are not done by the time the driver is unregistered. Signed-off-by: Maíra Canal <mcanal@igalia.com> Reviewed-by: Iago Toral Quiroga <itoral@igalia.com> Signed-off-by: Maíra Canal <mairacanal@riseup.net> Link: https://patchwork.freedesktop.org/patch/msgid/20231023105927.101502-1-mcanal@igalia.com
2023-10-30accel/ivpu: Add support for delayed D0i3 entry messageAndrzej Kacprowski8-8/+108
Currently the VPU firmware prepares for D0i3 every time the VPU is entering D0i2 Idle state. This is not optimal as we might not enter D0i3 every time we enter D0i2 Idle and this preparation is quite costly. This optimization moves D0i3 preparation to a dedicated message sent from the host driver only when the driver is about to enter D0i3 - this reduces power consumption and latency for certain workloads, for example audio workloads that submit inference every 10 ms. The VPU needs non zero time to enter IDLE state after responding to D0i3 entry message. If the driver does not wait for the VPU to enter IDLE state it could cause warm boot failures. Signed-off-by: Andrzej Kacprowski <andrzej.kacprowski@linux.intel.com> Reviewed-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com> Signed-off-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20231028133415.1169975-12-stanislaw.gruszka@linux.intel.com
2023-10-30accel/ivpu/37xx: Print warning when VPUIP is not idle during power downStanislaw Gruszka1-2/+5
Print warning if VPUIP is not idle during power down. Use warn log level also when we fail to enter reset state as this is not really an error but unexpected behavior. Reviewed-by: Krystian Pradzynski <krystian.pradzynski@linux.intel.com> Signed-off-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20231028133415.1169975-11-stanislaw.gruszka@linux.intel.com
2023-10-30accel/ivpu: Introduce ivpu_ipc_send_receive_active()Karol Wachowski2-14/+27
Split ivpu_ipc_send_receive() implementation to have a version that does not call pm_runtime_resume_and_get(). That implementation can be invoked when device is up and runtime resume is prohibited (for example at the end of boot sequence). The new function will be used for D0i3 entry IPC message addition in the separate change. Signed-off-by: Karol Wachowski <karol.wachowski@linux.intel.com> Reviewed-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com> Signed-off-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20231028133415.1169975-10-stanislaw.gruszka@linux.intel.com
2023-10-30accel/ivpu: Pass D0i3 residency time to the VPU firmwareAndrzej Kacprowski4-1/+28
The firmware needs to know the time spent in D0i3/D3 to calculate telemetry data. The D0i3/D3 residency time is calculated by the driver and passed to the firmware in the boot parameters. The driver also passes VPU perf counter value captured right before entering D0i3 - this allows the VPU firmware to generate monotonic timestamps for the logs. Signed-off-by: Andrzej Kacprowski <andrzej.kacprowski@linux.intel.com> Reviewed-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com> Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com> Signed-off-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20231028133415.1169975-9-stanislaw.gruszka@linux.intel.com
2023-10-30accel/ivpu/40xx: Capture D0i3 entry host and device timestampsAndrzej Kacprowski1-0/+8
The driver needs to capture the D0i3 entry timestamp to calculate D0i3 residency time. The D0i3 residency time and the VPU timestamp are passed to the firmware at D0i3 exit (warm boot). Signed-off-by: Andrzej Kacprowski <andrzej.kacprowski@linux.intel.com> Reviewed-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com> Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com> Signed-off-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20231028133415.1169975-8-stanislaw.gruszka@linux.intel.com
2023-10-30accel/ivpu: Change test_mode module param to bitmaskKarol Wachowski3-8/+7
Change meaning of test_mode module parameter from integer value to bitmask allowing setting different test features with corresponding bits. Signed-off-by: Karol Wachowski <karol.wachowski@linux.intel.com> Reviewed-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com> Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com> Signed-off-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20231028133415.1169975-7-stanislaw.gruszka@linux.intel.com
2023-10-30accel/ivpu: Add support for VPU_JOB_FLAGS_NULL_SUBMISSION_MASKAndrzej Kacprowski3-4/+7
Add test_mode = 3 that add VPU_JOB_FLAGS_NULL_SUBMISSION_MASK flag to the job send to the VPU device. Then the VPU will process the job but won't execute commands (except the command to signal the fence). This can be used to estimate job processing overhead in the host software and VPU firmware. Unlike the null hardware mode, the null submission mode will still work even if UMD uses VPU fences to track job completion. Signed-off-by: Andrzej Kacprowski <andrzej.kacprowski@linux.intel.com> Reviewed-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com> Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com> Signed-off-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20231028133415.1169975-6-stanislaw.gruszka@linux.intel.com
2023-10-30accel/ivpu: Remove reset from power up sequenceKarol Wachowski2-10/+0
Setting a non-zero work point resets the IP hence IP_RESET trigger is redundant. Signed-off-by: Karol Wachowski <karol.wachowski@linux.intel.com> Reviewed-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com> Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com> Signed-off-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20231028133415.1169975-5-stanislaw.gruszka@linux.intel.com
2023-10-30accel/ivpu: Add dvfs_mode file to debugfsTomasz Rusinowicz3-0/+34
Add new debugfs file to set dvfs_mode FW boot parameter and restart the FW to allow experimenting with DVFS (dynamic voltage & frequency scaling). Signed-off-by: Tomasz Rusinowicz <tomasz.rusinowicz@intel.com> Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com> Signed-off-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20231028133415.1169975-4-stanislaw.gruszka@linux.intel.com
2023-10-30accel/ivpu: Remove unneeded drm_driver declarationStanislaw Gruszka1-2/+0
Cleanup drm_driver declaration leftover. Reviewed-by: Krystian Pradzynski <krystian.pradzynski@linux.intel.com> Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com> Signed-off-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20231028133415.1169975-3-stanislaw.gruszka@linux.intel.com
2023-10-30accel/ivpu: Update FW APIKrystian Pradzynski3-24/+392
Bump boot API to 4.20 Bump JSM API to 3.15 Signed-off-by: Krystian Pradzynski <krystian.pradzynski@linux.intel.com> Reviewed-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com> Signed-off-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20231028133415.1169975-2-stanislaw.gruszka@linux.intel.com
2023-10-30accel/ivpu: avoid build failure with CONFIG_PM=nArnd Bergmann1-3/+0
The usage count of struct dev_pm_info is an implementation detail that is only available if CONFIG_PM is enabled, so printing it in a debug message causes a build failure in configurations without PM: In file included from include/linux/device.h:15, from include/linux/pci.h:37, from drivers/accel/ivpu/ivpu_pm.c:8: drivers/accel/ivpu/ivpu_pm.c: In function 'ivpu_rpm_get_if_active': drivers/accel/ivpu/ivpu_pm.c:254:51: error: 'struct dev_pm_info' has no member named 'usage_count' 254 | atomic_read(&vdev->drm.dev->power.usage_count)); | ^ include/linux/dev_printk.h:129:48: note: in definition of macro 'dev_printk' 129 | _dev_printk(level, dev, fmt, ##__VA_ARGS__); \ | ^~~~~~~~~~~ drivers/accel/ivpu/ivpu_drv.h:75:17: note: in expansion of macro 'dev_dbg' 75 | dev_dbg((vdev)->drm.dev, "[%s] " fmt, #type, ##args); \ | ^~~~~~~ drivers/accel/ivpu/ivpu_pm.c:253:9: note: in expansion of macro 'ivpu_dbg' 253 | ivpu_dbg(vdev, RPM, "rpm_get_if_active count %d\n", | ^~~~~~~~ The print message does not seem essential, so the easiest workaround is to just remove it. Fixes: c39dc15191c4 ("accel/ivpu: Read clock rate only if device is up") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com> Signed-off-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20231027152633.528490-1-arnd@kernel.org
2023-10-27drm/panel-edp: Add AUO B116XTN02, BOE NT116WHM-N21,836X2, NV116WHM-N49 V8.0Sheng-Liang Pan1-0/+3
Add panel identification entry for - AUO B116XTN02 family (product ID:0x235c) - BOE NT116WHM-N21,836X2 (product ID:0x09c3) - BOE NV116WHM-N49 V8.0 (product ID:0x0979) Signed-off-by: Sheng-Liang Pan <sheng-liang.pan@quanta.corp-partner.google.com> Signed-off-by: Douglas Anderson <dianders@chromium.org> Link: https://patchwork.freedesktop.org/patch/msgid/20231027110435.1.Ia01fe9ec1c0953e0050a232eaa782fef2c037516@changeid
2023-10-27accel/qaic: Support MHI QAIC_TIMESYNC channelPranjal Ramajor Asha Kanojiya5-5/+166
Use QAIC_TIMESYNC MHI channel to send UTC time to device in SBL environment. Remove support for QAIC_TIMESYNC MHI channel in AMSS environment as it is not used in that environment. Signed-off-by: Pranjal Ramajor Asha Kanojiya <quic_pkanojiy@quicinc.com> Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com> Reviewed-by: Carl Vanderlip <quic_carlv@quicinc.com> Signed-off-by: Jeffrey Hugo <quic_jhugo@quicinc.com> Reviewed-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20231016170114.5446-3-quic_jhugo@quicinc.com
2023-10-27accel/qaic: Add support for periodic timesyncAjit Pal Singh7-1/+305
Device and Host have a time synchronization mechanism that happens once during boot when device is in SBL mode. After that, in mission-mode there is no timesync. In an experiment after continuous operation, device time drifted w.r.t. host by approximately 3 seconds per day. This drift leads to mismatch in timestamp of device and Host logs. To correct this implement periodic timesync in driver. This timesync is carried out via QAIC_TIMESYNC_PERIODIC MHI channel. Signed-off-by: Ajit Pal Singh <quic_ajitpals@quicinc.com> Signed-off-by: Pranjal Ramajor Asha Kanojiya <quic_pkanojiy@quicinc.com> Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com> Reviewed-by: Carl Vanderlip <quic_carlv@quicinc.com> Reviewed-by: Pranjal Ramajor Asha Kanojiya <quic_pkanojiy@quicinc.com> Signed-off-by: Jeffrey Hugo <quic_jhugo@quicinc.com> Reviewed-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20231016170114.5446-2-quic_jhugo@quicinc.com
2023-10-27accel/qaic: Enable 1 MSI fallback modeCarl Vanderlip7-22/+76
Several virtualization use-cases either don't support 32 MultiMSIs (Xen/VMware) or have significant drawbacks to their use (KVM's vIOMMU, which is required to support 32 MSI, needs to allocate an alternate system memory space for each device using vIOMMU (e.g. 8GB VM mem and 2 cards => 8 + 2 * 8 = 24GB host memory required)). Support these cases by enabling a 1 MSI fallback mode. Whenever all 32 MSIs requested are not available, a second request for a single MSI is made. Its success is the initiator of single MSI mode. This mode causes all interrupts generated by the device to be directed to the 0th MSI (firmware >=v1.10 will do this as a response to the PCIe MSI capability configuration). Likewise, all interrupt handlers for the device are registered to the 0th MSI. Since the DBC interrupt handler checks if the DBC is in use or if there is any pending changes, the 'spurious' interrupts are disregarded. If there is work to be done, the standard threaded IRQ handler is dispatched. On every interrupt, the MHI handler wakes up its threaded interrupt handler, and attempts to wake any waiters for MHI state events. Performance is within +-0.6% for test cases that typify real world use. Larger differences ([-4,+132]%, avg +47%) exist for very simple tasks (e.g. addition) compiled for single NSPs. It is assumed that the small work and many interrupts typically cause contention (e.g. 16 NSPs vs 4 CPUs), as evidenced by the standard deviation between runs also decreasing (r=-0.48 between delta(Performace_test) and delta(StdDev_test/Avg_test)) Signed-off-by: Carl Vanderlip <quic_carlv@quicinc.com> Reviewed-by: Pranjal Ramajor Asha Kanojiya <quic_pkanojiy@quicinc.com> Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com> Signed-off-by: Jeffrey Hugo <quic_jhugo@quicinc.com> Reviewed-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20231016170036.5409-1-quic_jhugo@quicinc.com
2023-10-27drm/doc: describe PATH format for DP MSTSimon Ser1-0/+6
This is already uAPI, xserver parses it. It's useful to document since user-space might want to lookup the parent connector. Additionally, people (me included) have misunderstood the PATH property for being stable across reboots, but since a KMS object ID is baked in there that's not the case. So PATH shouldn't be used as-is in config files and such. Signed-off-by: Simon Ser <contact@emersion.fr> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Acked-by: Pekka Paalanen <pekka.paalanen@collabora.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20231023203629.198109-1-contact@emersion.fr
2023-10-27drm: introduce CLOSEFB IOCTLSimon Ser5-0/+55
This new IOCTL allows callers to close a framebuffer without disabling planes or CRTCs. This takes inspiration from Rob Clark's unref_fb IOCTL [1] and DRM_MODE_FB_PERSIST [2]. User-space patch for wlroots available at [3]. IGT test available at [4]. v2: add an extra pad field just in case we want to extend this IOCTL in the future (Pekka, Sima). [1]: https://lore.kernel.org/dri-devel/20170509153654.23464-1-robdclark@gmail.com/ [2]: https://lore.kernel.org/dri-devel/20211006151921.312714-1-contact@emersion.fr/ [3]: https://gitlab.freedesktop.org/wlroots/wlroots/-/merge_requests/4394 [4]: https://lists.freedesktop.org/archives/igt-dev/2023-October/063294.html Signed-off-by: Simon Ser <contact@emersion.fr> Reviewed-by: Daniel Stone <daniels@collabora.com> Acked-by: Pekka Paalanen <pekka.paalanen@collabora.com> Cc: Hans de Goede <hdegoede@redhat.com> Cc: Dennis Filder <d.filder@web.de> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Rob Clark <robdclark@gmail.com> Cc: Sean Paul <seanpaul@chromium.org> Link: https://patchwork.freedesktop.org/patch/msgid/20231020101926.145327-2-contact@emersion.fr
2023-10-27drm: extract closefb logic in separate functionSimon Ser1-22/+31
drm_mode_rmfb performs two operations: drop the FB from the file_priv->fbs list, and make sure the FB is no longer used on a plane. In the next commit an IOCTL which only does so former will be introduced, so let's split it into a separate function. No functional change, only refactoring. v2: no change Signed-off-by: Simon Ser <contact@emersion.fr> Cc: Hans de Goede <hdegoede@redhat.com> Cc: Dennis Filder <d.filder@web.de> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Pekka Paalanen <ppaalanen@gmail.com> Cc: Rob Clark <robdclark@gmail.com> Cc: Sean Paul <seanpaul@chromium.org> Reviewed-by: Daniel Stone <daniels@collabora.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20231020101926.145327-1-contact@emersion.fr
2023-10-27drm/atomic-helper: Fix spelling mistake "preceeding" -> "preceding"Kunwu Chan1-2/+2
There is a typo in the kernel documentation for function drm_atomic_helper_wait_for_dependencies. Fix it. Signed-off-by: Kunwu Chan <chentao@kylinos.cn> Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20231027024459.12793-1-chentao@kylinos.cn
2023-10-27drm/ssd130x: Fix possible uninitialized usage of crtc_state variableJavier Martinez Canillas1-1/+1
Avoid a possible uninitialized use of the crtc_state variable in function ssd132x_primary_plane_atomic_check() and avoid the following Smatch warn: drivers/gpu/drm/solomon/ssd130x.c:921 ssd132x_primary_plane_atomic_check() error: uninitialized symbol 'crtc_state'. Fixes: fdd591e00a9c ("drm/ssd130x: Add support for the SSD132x OLED controller family") Reported-by: Dan Carpenter <dan.carpenter@linaro.org> Closes: https://lore.kernel.org/dri-devel/7dd6ca45-8263-44fe-a318-2fd9d761425d@moroto.mountain/ Signed-off-by: Javier Martinez Canillas <javierm@redhat.com> Acked-by: Jocelyn Falempe <jfalempe@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20231020225338.1686974-1-javierm@redhat.com
2023-10-27dt-bindings: display: ssd132x: Remove '-' before compatible enumJavier Martinez Canillas1-4/+4
This is a leftover from when the binding schema had the compatible string property enum as a 'oneOf' child and the '-' was not removed when 'oneOf' got dropped during the binding review process. Reported-by: Rob Herring <robh@kernel.org> Closes: https://lore.kernel.org/dri-devel/CAL_Jsq+h8DcnpKqhokQOODCc8+Qi3M0PrxRFKz_Y4v37yMJvvA@mail.gmail.com/ Signed-off-by: Javier Martinez Canillas <javierm@redhat.com> Acked-by: Conor Dooley <conor.dooley@microchip.com> Reviewed-by: Rob Herring <robh@kernel.org> Link: https://patchwork.freedesktop.org/patch/msgid/20231020223029.1667190-1-javierm@redhat.com
2023-10-26drm/amdgpu: move buffer funcs setting up a levelAlex Deucher11-84/+19
Rather than doing this in the IP code for the SDMA paging engine, move it up to the core device level init level. This should fix the scheduler init ordering. v2: drop extra parens v3: drop SDMA helpers v4: Added a Fixes tag because amdgpu dereferences an uninitialized scheduler without this patch, and this patch fixes this. (Luben) Tested-by: Luben Tuikov <luben.tuikov@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Link: https://lore.kernel.org/r/20231025171928.3318505-1-alexander.deucher@amd.com Acked-by: Christian König <christian.koenig@amd.com> Fixes: 56e449603f0ac5 ("drm/sched: Convert the GPU scheduler to variable number of run-queues") Signed-off-by: Luben Tuikov <ltuikov89@gmail.com>
2023-10-26MAINTAINERS: Update the GPU Scheduler emailLuben Tuikov1-1/+1
Update the GPU Scheduler maintainer email. Cc: Alex Deucher <Alexander.Deucher@amd.com> Cc: Christian König <christian.koenig@amd.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Dave Airlie <airlied@gmail.com> Cc: AMD Graphics <amd-gfx@lists.freedesktop.org> Cc: Direct Rendering Infrastructure - Development <dri-devel@lists.freedesktop.org> Signed-off-by: Luben Tuikov <ltuikov89@gmail.com> Acked-by: Alex Deucher <Alexander.Deucher@amd.com> Link: https://lore.kernel.org/r/20231026174438.18427-2-ltuikov89@gmail.com
2023-10-26drm/sched: Convert the GPU scheduler to variable number of run-queuesLuben Tuikov11-25/+98
The GPU scheduler has now a variable number of run-queues, which are set up at drm_sched_init() time. This way, each driver announces how many run-queues it requires (supports) per each GPU scheduler it creates. Note, that run-queues correspond to scheduler "priorities", thus if the number of run-queues is set to 1 at drm_sched_init(), then that scheduler supports a single run-queue, i.e. single "priority". If a driver further sets a single entity per run-queue, then this creates a 1-to-1 correspondence between a scheduler and a scheduled entity. Cc: Lucas Stach <l.stach@pengutronix.de> Cc: Russell King <linux+etnaviv@armlinux.org.uk> Cc: Qiang Yu <yuq825@gmail.com> Cc: Rob Clark <robdclark@gmail.com> Cc: Abhinav Kumar <quic_abhinavk@quicinc.com> Cc: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Cc: Danilo Krummrich <dakr@redhat.com> Cc: Matthew Brost <matthew.brost@intel.com> Cc: Boris Brezillon <boris.brezillon@collabora.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: Christian König <christian.koenig@amd.com> Cc: Emma Anholt <emma@anholt.net> Cc: etnaviv@lists.freedesktop.org Cc: lima@lists.freedesktop.org Cc: linux-arm-msm@vger.kernel.org Cc: freedreno@lists.freedesktop.org Cc: nouveau@lists.freedesktop.org Cc: dri-devel@lists.freedesktop.org Signed-off-by: Luben Tuikov <luben.tuikov@amd.com> Acked-by: Christian König <christian.koenig@amd.com> Link: https://lore.kernel.org/r/20231023032251.164775-1-luben.tuikov@amd.com
2023-10-26MAINTAINERS: drm/ci: add entries for xfail filesHelen Koike1-0/+7
DRM CI keeps track of which tests are failing, flaking or being skipped by the ci in the expectations files. Add entries for those files to the corresponding driver maintainer, so they can be notified when they change. Signed-off-by: Helen Koike <helen.koike@collabora.com> Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://lore.kernel.org/r/20230919182249.153499-1-helen.koike@collabora.com Signed-off-by: Maxime Ripard <mripard@kernel.org>
2023-10-26drm/ci: docs: add step about how to request privilegesHelen Koike1-2/+5
Clarify the procedure developer must follow to request privileges to run tests on Freedesktop gitlab CI. This measure was added to avoid untrusted people to misuse the infrastructure. Signed-off-by: Helen Koike <helen.koike@collabora.com> Reviewed-by: David Heidelberg <david.heidelberg@collabora.com> Link: https://lore.kernel.org/r/20231024004525.169002-11-helen.koike@collabora.com Signed-off-by: Maxime Ripard <mripard@kernel.org>
2023-10-26drm/ci: do not automatically retry on errorHelen Koike1-14/+0
Since the kernel doesn't use a bot like Mesa that requires tests to pass in order to merge the patches, leave it to developers and/or maintainers to manually retry. Suggested-by: Rob Clark <robdclark@chromium.org> Signed-off-by: Helen Koike <helen.koike@collabora.com> Reviewed-by: David Heidelberg <david.heidelberg@collabora.com> Link: https://lore.kernel.org/r/20231024004525.169002-10-helen.koike@collabora.com Signed-off-by: Maxime Ripard <mripard@kernel.org>
2023-10-26drm/ci: export kernel configHelen Koike2-1/+2
Export the resultant kernel config, making it easier to verify if the resultant config was correctly generated. Suggested-by: Rob Clark <robdclark@chromium.org> Signed-off-by: Helen Koike <helen.koike@collabora.com> Acked-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: David Heidelberg <david.heidelberg@collabora.com> Link: https://lore.kernel.org/r/20231024004525.169002-9-helen.koike@collabora.com Signed-off-by: Maxime Ripard <mripard@kernel.org>
generated by cgit v1.2.3 (git 2.39.0) at 2024-07-28 18:17:14 +0300