| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
https://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into arm/fixes
A number of pin fixes for Puma, Rock-Pi-E and rk356x, and as it turns
out the VO0 and VO1 general register files are not identical as suggested
by their original compatible. As there are no users of those yet,
everybody agreed that we should fix the compatibles.
* tag 'v6.11-rockchip-dtsfixes' of https://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip:
arm64: dts: rockchip: Fix compatibles for RK3588 VO{0,1}_GRF
dt-bindings: soc: rockchip: Fix compatibles for RK3588 VO{0,1}_GRF
arm64: dts: rockchip: override BIOS_DISABLE signal via GPIO hog on RK3399 Puma
arm64: dts: rockchip: fix eMMC/SPI corruption when audio has been used on RK3399 Puma
arm64: dts: rockchip: fix PMIC interrupt pin in pinctrl for ROCK Pi E
arm64: dts: rockchip: Remove broken tsadc pinctrl binding for rk356x
Link: https://lore.kernel.org/r/7602696.A5hrfCrGMc@diego
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/fixes
One more Qualcomm driver fix for v6.11
This resolves a deadlock in the Qualcomm uefisecapp driver following the
attempt to acquire global context is acquired in the case the device
isn't probed.
* tag 'qcom-drivers-fixes-for-6.11-2' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux:
firmware: qcom: uefisecapp: Fix deadlock in qcuefi_acquire()
Link: https://lore.kernel.org/r/20240904145214.4089-1-andersson@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
If the __qcuefi pointer is not set, then in the original code, we would
hold onto the lock. That means that if we tried to set it later, then
it would cause a deadlock. Drop the lock on the error path. That's
what all the callers are expecting.
Fixes: 759e7a2b62eb ("firmware: Add support for Qualcomm UEFI Secure Application")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/19829bc4-1b6f-47f7-847a-e90c25749e40@stanley.mountain
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/at91/linux into arm/fixes
Microchip AT91 fixes for v6.11
It contains:
- DTS directory update to match all entries not only those starting with
at91 or sama
|
|
RK3588 VO0 and VO1 GRFs are not identical (though quite similar in terms
of layout) and, therefore, incorrectly shared the compatible string.
Since the related binding document has been updated to use dedicated
strings, update the compatibles for vo{0,1}_grf DT nodes accordingly.
Additionally, for consistency, set the full region size (16KB) for
VO1_GRF.
Reported-by: Conor Dooley <conor@kernel.org>
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20240828-rk3588-vo-grf-compat-v2-2-4db2f791593f@collabora.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
According to RK3588 TRM, VO0_GRF and VO1_GRF have a similar layout, but
definitely not an identical one, therefore sharing the compatible is not
really justified.
Since currently there is no user of this, hence no ABI break, let's fix
it by providing dedicated compatibles while deprecating the old one.
Reported-by: Conor Dooley <conor@kernel.org>
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20240828-rk3588-vo-grf-compat-v2-1-4db2f791593f@collabora.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/conor/linux into arm/fixes
RISC-V soc fixes for v6.11-rc6
Prevent an erroneous unconditional report of a timeout during firmware
upload in the mpfs-auto-update driver.
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
* tag 'riscv-soc-fixes-for-v6.11-rc6' of https://git.kernel.org/pub/scm/linux/kernel/git/conor/linux:
firmware: microchip: fix incorrect error report of programming:timeout on success
Link: https://lore.kernel.org/r/20240828-fidelity-almighty-18d5434aaef0@spud
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/fixes
Qualcomm Arm64 DeviceTree fixes for v6.11
On X1E the GPU node is disabled by default, to be enabled in the
individual devices once the developers install the required firmware.
The generic EDP panel driver used on the X1E CRD is replaced with the
Samsung ATNA45AF01 driver, in order to ensure backlight is brought back
up after being turned off.
The pin configuration for PCIe-related pins are corrected across all the
X1E targets. The PCIe controllers gain a minimum OPP vote, and PCIe
domain numbers are corrected.
WiFi calibration variant information is added to the Lenovo Yoga Slim
7x, to pick the right data from the firmware packages.
The incorrect Adreno SMMU global interrupt is corrected.
For IPQ5332, the IRQ triggers for the USB controller are corrected.
* tag 'qcom-arm64-fixes-for-6.11' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (23 commits)
arm64: dts: qcom: x1e80100: Fix Adreno SMMU global interrupt
arm64: dts: qcom: disable GPU on x1e80100 by default
arm64: dts: qcom: x1e80100-crd: Fix backlight
arm64: dts: qcom: x1e80100-yoga-slim7x: fix missing PCIe4 gpios
arm64: dts: qcom: x1e80100-yoga-slim7x: disable PCIe6a perst pull down
arm64: dts: qcom: x1e80100-yoga-slim7x: fix up PCIe6a pinctrl node
arm64: dts: qcom: x1e80100-yoga-slim7x: fix PCIe4 PHY supply
arm64: dts: qcom: x1e80100-vivobook-s15: fix missing PCIe4 gpios
arm64: dts: qcom: x1e80100-vivobook-s15: disable PCIe6a perst pull down
arm64: dts: qcom: x1e80100-vivobook-s15: fix up PCIe6a pinctrl node
arm64: dts: qcom: x1e80100-vivobook-s15: fix PCIe4 PHY supply
arm64: dts: qcom: x1e80100-qcp: fix missing PCIe4 gpios
arm64: dts: qcom: x1e80100-qcp: disable PCIe6a perst pull down
arm64: dts: qcom: x1e80100-qcp: fix up PCIe6a pinctrl node
arm64: dts: qcom: x1e80100-qcp: fix PCIe4 PHY supply
arm64: dts: qcom: x1e80100-crd: fix missing PCIe4 gpios
arm64: dts: qcom: x1e80100-crd: disable PCIe6a perst pull down
arm64: dts: qcom: x1e80100-crd: fix up PCIe6a pinctrl node
arm64: dts: qcom: x1e80100: add missing PCIe minimum OPP
arm64: dts: qcom: x1e80100: fix PCIe domain numbers
...
Link: https://lore.kernel.org/r/20240826152426.1648383-1-andersson@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/fixes
Qualcomm Arm64 defconfig fix for 6.11
Enable the Samsung ATNA33XC20 display panel driver, as we switched from
the generic EDP panel for some of the X1E devices in v6.11.
* tag 'qcom-arm64-defconfig-fixes-for-6.11' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux:
arm64: defconfig: Add CONFIG_DRM_PANEL_SAMSUNG_ATNA33XC20
Link: https://lore.kernel.org/r/20240826145736.1646729-1-andersson@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/fixes
Qualcomm driver fixes for v6.11
This corrects the tzmem virt-to-phys conversion, which caused issues for
the uefisecapp implementation of EFI variable access. SDM670 is excluded
from tzmem usage due to reported issues.
The SCM get wait queue context call is corrected to be marked ATOMIC and
some dead code in qseecom, following the tzmem conversion, is removed.
The memory backing command DB is remapped writecombined, to avoid XPU
violations when Linux runs without the Qualcomm hypervisor.
Two compile fixes are added for pd-mapper, and the broken reference
count is corrected, to make pd-mapper deal with remoteprocs going away.
In pmic_glink a race condition where the client callbacks might be
called before we returned the client handle is corrected. The broken conditions
for when to signal that the firmware is going down is also corrected.
In the pmic_glink UCSI driver, the ucsi_unregister() is moved out of the
pdr callback, as this is being invoked in atomic context.
Konrad's email address is updated in MAINTAINERS, and related mailmap
entries are added.
* tag 'qcom-drivers-fixes-for-6.11' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux:
soc: qcom: pd-mapper: Fix singleton refcount
firmware: qcom: tzmem: disable sdm670 platform
soc: qcom: pmic_glink: Actually communicate when remote goes down
usb: typec: ucsi: Move unregister out of atomic section
soc: qcom: pmic_glink: Fix race during initialization
firmware: qcom: qseecom: remove unused functions
firmware: qcom: tzmem: fix virtual-to-physical address conversion
firmware: qcom: scm: Mark get_wq_ctx() as atomic call
MAINTAINERS: Update Konrad Dybcio's email address
mailmap: Add an entry for Konrad Dybcio
soc: qcom: pd-mapper: mark qcom_pdm_domains as __maybe_unused
soc: qcom: cmd-db: Map shared memory as WC, not WB
soc: qcom: pd-mapper: Depend on ARCH_QCOM || COMPILE_TEST
Link: https://lore.kernel.org/r/20240826145209.1646159-1-andersson@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/fixes
i.MX fixes for 6.11:
- One imx8mp-beacon-kit change from Adam Ford to fix the broken WM8962
audio support
- One pinctrl property typo fix for imx8mm-phygate
- One layerscape fix from Krzysztof Kozlowski to get thermal nodes
correct name length
- A couple of imx93-tqma9352 fixes from Markus Niebel, one on CMA
alloc-ranges and the other on SD-Card cd-gpios typo
- One change from Michal Vokáč to fix imx6dl-yapp43 LED current to match
the HW design
- A couple of imx95 fixes from Peng Fan, one to correct a55 power
domains and the other to correct L3Cache cache-sets
- One tqma9352 watchdog reset fix from Sascha Hauer
- One imx93 change from Shenwei Wang to fix the default value for STMMAC
EQOS snps,clk-csr
* tag 'imx-fixes-6.11' of https://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
arm64: dts: imx8mm-phygate: fix typo pinctrcl-0
arm64: dts: imx95: correct L3Cache cache-sets
arm64: dts: imx95: correct a55 power-domains
arm64: dts: freescale: imx93-tqma9352-mba93xxla: fix typo
arm64: dts: freescale: imx93-tqma9352: fix CMA alloc-ranges
ARM: dts: imx6dl-yapp43: Increase LED current to match the yapp4 HW design
arm64: dts: imx93: update default value for snps,clk-csr
arm64: dts: freescale: tqma9352: Fix watchdog reset
arm64: dts: imx8mp-beacon-kit: Fix Stereo Audio on WM8962
arm64: dts: layerscape: fix thermal node names length
Link: https://lore.kernel.org/r/ZrtsTO1+jXhJ6GSM@dragon
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-omap into arm/fixes
OMAP fixes for v6.11-rc
- omap3-n900: fix accelerometer orientation
* tag 'omap-for-v6.11/fixes-signed' of https://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-omap:
ARM: dts: omap3-n900: correct the accelerometer orientation
Link: https://lore.kernel.org/r/7h4j7eyhyh.fsf@baylibre.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
success
After successfully programming the SPI flash with an MFPS auto update
image, the error sysfs attribute reports programming:timeout.
This is caused by an incorrect check on the return value from
wait_for_completion_timeout() in mpfs_auto_update_poll_complete().
Fixes: ec5b0f1193ad ("firmware: microchip: add PolarFire SoC Auto Update support")
Signed-off-by: Steve Wilkins <steve.wilkins@raymarine.com>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
|
|
The Qualcomm pd-mapper is a refcounted singleton, but the refcount is
never incremented, which means the as soon as any remoteproc instance
stops the count will hit 0.
At this point the pd-mapper QMI service is stopped, leaving firmware
without access to the PD information. Stopping any other remoteproc
instances will result in a use-after-free, which best case manifest
itself as a refcount underflow:
refcount_t: underflow; use-after-free.
WARNING: CPU: 1 PID: 354 at lib/refcount.c:87 refcount_dec_and_mutex_lock+0xc4/0x148
...
Call trace:
refcount_dec_and_mutex_lock+0xc4/0x148
qcom_pdm_remove+0x40/0x118 [qcom_pd_mapper]
...
Fix this by incrementing the refcount, so that the pd-mapper is only
torn down when the last remoteproc stops, as intended.
Fixes: 1ebcde047c54 ("soc: qcom: add pd-mapper implementation")
Signed-off-by: Bjorn Andersson <quic_bjorande@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20240820-pd-mapper-refcount-fix-v1-1-03ea65c0309b@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
The Pixel 3a returns 4291821499 (-3145797 or 0xFFCFFFBB) when attempting
to load the GPU firmware if tzmem is allowed. Disable it on SDM670 so
the GPU can successfully probe.
Signed-off-by: Richard Acayan <mailingradian@gmail.com>
Acked-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Link: https://lore.kernel.org/r/20240730013834.41840-2-mailingradian@gmail.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
When the pmic_glink state is UP and we either receive a protection-
domain (PD) notification indicating that the PD is going down, or that
the whole remoteproc is going down, it's expected that the pmic_glink
client instances are notified that their function has gone DOWN.
This is not what the code does, which results in the client state either
not updating, or being wrong in many cases. So let's fix the conditions.
Fixes: 58ef4ece1e41 ("soc: qcom: pmic_glink: Introduce base PMIC GLINK driver")
Cc: stable@vger.kernel.org
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Tested-by: Amit Pundir <amit.pundir@linaro.org>
Reviewed-by: Johan Hovold <johan+linaro@kernel.org>
Tested-by: Johan Hovold <johan+linaro@kernel.org>
Signed-off-by: Bjorn Andersson <quic_bjorande@quicinc.com>
Link: https://lore.kernel.org/r/20240820-pmic-glink-v6-11-races-v3-3-eec53c750a04@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Commit '9329933699b3 ("soc: qcom: pmic_glink: Make client-lock
non-sleeping")' moved the pmic_glink client list under a spinlock, as it
is accessed by the rpmsg/glink callback, which in turn is invoked from
IRQ context.
This means that ucsi_unregister() is now called from atomic context,
which isn't feasible as it's expecting a sleepable context. An effort is
under way to get GLINK to invoke its callbacks in a sleepable context,
but until then lets schedule the unregistration.
A side effect of this is that ucsi_unregister() can now happen
after the remote processor, and thereby the communication link with it, is
gone. pmic_glink_send() is amended with a check to avoid the resulting NULL
pointer dereference.
This does however result in the user being informed about this error by
the following entry in the kernel log:
ucsi_glink.pmic_glink_ucsi pmic_glink.ucsi.0: failed to send UCSI write request: -5
Fixes: 9329933699b3 ("soc: qcom: pmic_glink: Make client-lock non-sleeping")
Cc: stable@vger.kernel.org
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Tested-by: Amit Pundir <amit.pundir@linaro.org>
Reviewed-by: Johan Hovold <johan+linaro@kernel.org>
Tested-by: Johan Hovold <johan+linaro@kernel.org>
Signed-off-by: Bjorn Andersson <quic_bjorande@quicinc.com>
Link: https://lore.kernel.org/r/20240820-pmic-glink-v6-11-races-v3-2-eec53c750a04@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
As pointed out by Stephen Boyd it is possible that during initialization
of the pmic_glink child drivers, the protection-domain notifiers fires,
and the associated work is scheduled, before the client registration
returns and as a result the local "client" pointer has been initialized.
The outcome of this is a NULL pointer dereference as the "client"
pointer is blindly dereferenced.
Timeline provided by Stephen:
CPU0 CPU1
---- ----
ucsi->client = NULL;
devm_pmic_glink_register_client()
client->pdr_notify(client->priv, pg->client_state)
pmic_glink_ucsi_pdr_notify()
schedule_work(&ucsi->register_work)
<schedule away>
pmic_glink_ucsi_register()
ucsi_register()
pmic_glink_ucsi_read_version()
pmic_glink_ucsi_read()
pmic_glink_ucsi_read()
pmic_glink_send(ucsi->client)
<client is NULL BAD>
ucsi->client = client // Too late!
This code is identical across the altmode, battery manager and usci
child drivers.
Resolve this by splitting the allocation of the "client" object and the
registration thereof into two operations.
This only happens if the protection domain registry is populated at the
time of registration, which by the introduction of commit '1ebcde047c54
("soc: qcom: add pd-mapper implementation")' became much more likely.
Reported-by: Amit Pundir <amit.pundir@linaro.org>
Closes: https://lore.kernel.org/all/CAMi1Hd2_a7TjA7J9ShrAbNOd_CoZ3D87twmO5t+nZxC9sX18tA@mail.gmail.com/
Reported-by: Johan Hovold <johan@kernel.org>
Closes: https://lore.kernel.org/all/ZqiyLvP0gkBnuekL@hovoldconsulting.com/
Reported-by: Stephen Boyd <swboyd@chromium.org>
Closes: https://lore.kernel.org/all/CAE-0n52JgfCBWiFQyQWPji8cq_rCsviBpW-m72YitgNfdaEhQg@mail.gmail.com/
Fixes: 58ef4ece1e41 ("soc: qcom: pmic_glink: Introduce base PMIC GLINK driver")
Cc: stable@vger.kernel.org
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Tested-by: Amit Pundir <amit.pundir@linaro.org>
Reviewed-by: Johan Hovold <johan+linaro@kernel.org>
Acked-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Tested-by: Johan Hovold <johan+linaro@kernel.org>
Signed-off-by: Bjorn Andersson <quic_bjorande@quicinc.com>
Link: https://lore.kernel.org/r/20240820-pmic-glink-v6-11-races-v3-1-eec53c750a04@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core fixes from Greg KH:
"Here are two driver fixes for regressions from 6.11-rc1 due to the
driver core change making a structure in a driver core callback const.
These were missed by all testing EXCEPT for what Bart happened to be
running, so I appreciate the fixes provided here for some
odd/not-often-used driver subsystems that nothing else happened to
catch.
Both of these fixes have been in linux-next all week with no reported
issues"
* tag 'driver-core-6.11-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core:
mips: sgi-ip22: Fix the build
ARM: riscpc: ecard: Fix the build
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char / misc fixes from Greg KH:
"Here are some small char/misc fixes for 6.11-rc4 to resolve reported
problems. Included in here are:
- fastrpc revert of a change that broke userspace
- xillybus fixes for reported issues
Half of these have been in linux-next this week with no reported
problems, I don't know if the last bit of xillybus driver changes made
it in, but they are 'obviously correct' so will be safe :)"
* tag 'char-misc-6.11-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
char: xillybus: Check USB endpoints when probing device
char: xillybus: Refine workqueue handling
Revert "misc: fastrpc: Restrict untrusted app to attach to privileged PD"
char: xillybus: Don't destroy workqueue from work item running on it
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull tty / serial fixes from Greg KH:
"Here are some small tty and serial driver fixes for 6.11-rc4 to
resolve some reported problems. Included in here are:
- conmakehash.c userspace build issues
- fsl_lpuart driver fix
- 8250_omap revert for reported regression
- atmel_serial rts flag fix
All of these have been in linux-next this week with no reported
issues"
* tag 'tty-6.11-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
Revert "serial: 8250_omap: Set the console genpd always on if no console suspend"
tty: atmel_serial: use the correct RTS flag.
tty: vt: conmakehash: remove non-portable code printing comment header
tty: serial: fsl_lpuart: mark last busy before uart_add_one_port
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB / Thunderbolt driver fixes from Greg KH:
"Here are some small USB and Thunderbolt driver fixes for 6.11-rc4 to
resolve some reported issues. Included in here are:
- thunderbolt driver fixes for reported problems
- typec driver fixes
- xhci fixes
- new device id for ljca usb driver
All of these have been in linux-next this week with no reported
issues"
* tag 'usb-6.11-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
xhci: Fix Panther point NULL pointer deref at full-speed re-enumeration
usb: misc: ljca: Add Lunar Lake ljca GPIO HID to ljca_gpio_hids[]
Revert "usb: typec: tcpm: clear pd_event queue in PORT_RESET"
usb: typec: ucsi: Fix the return value of ucsi_run_command()
usb: xhci: fix duplicate stall handling in handle_tx_event()
usb: xhci: Check for xhci->interrupters being allocated in xhci_mem_clearup()
thunderbolt: Mark XDomain as unplugged when router is removed
thunderbolt: Fix memory leaks in {port|retimer}_sb_regs_write()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull more btrfs fixes from David Sterba:
"A more fixes. We got reports that shrinker added in 6.10 still causes
latency spikes and the fixes don't handle all corner cases. Due to
summer holidays we're taking a shortcut to disable it for release
builds and will fix it in the near future.
- only enable extent map shrinker for DEBUG builds, temporary quick
fix to avoid latency spikes for regular builds
- update target inode's ctime on unlink, mandated by POSIX
- properly take lock to read/update block group's zoned variables
- add counted_by() annotations"
* tag 'for-6.11-rc3-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
btrfs: only enable extent map shrinker for DEBUG builds
btrfs: zoned: properly take lock to read/update block group's zoned variables
btrfs: tree-checker: add dev extent item checks
btrfs: update target inode's ctime on unlink
btrfs: send: annotate struct name_cache_entry with __counted_by()
|
|
fuse_notify_store(), unlike fuse_do_readpage(), does not enable page
zeroing (because it can be used to change partial page contents).
So fuse_notify_store() must be more careful to fully initialize page
contents (including parts of the page that are beyond end-of-file)
before marking the page uptodate.
The current code can leave beyond-EOF page contents uninitialized, which
makes these uninitialized page contents visible to userspace via mmap().
This is an information leak, but only affects systems which do not
enable init-on-alloc (via CONFIG_INIT_ON_ALLOC_DEFAULT_ON=y or the
corresponding kernel command line parameter).
Link: https://bugs.chromium.org/p/project-zero/issues/detail?id=2574
Cc: stable@kernel.org
Fixes: a1d75f258230 ("fuse: add store request")
Signed-off-by: Jann Horn <jannh@google.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull misc fixes from Andrew Morton:
"16 hotfixes. All except one are for MM. 10 of these are cc:stable and
the others pertain to post-6.10 issues.
As usual with these merges, singletons and doubletons all over the
place, no identifiable-by-me theme. Please see the lovingly curated
changelogs to get the skinny"
* tag 'mm-hotfixes-stable-2024-08-17-19-34' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
mm/migrate: fix deadlock in migrate_pages_batch() on large folios
alloc_tag: mark pages reserved during CMA activation as not tagged
alloc_tag: introduce clear_page_tag_ref() helper function
crash: fix riscv64 crash memory reserve dead loop
selftests: memfd_secret: don't build memfd_secret test on unsupported arches
mm: fix endless reclaim on machines with unaccepted memory
selftests/mm: compaction_test: fix off by one in check_compaction()
mm/numa: no task_numa_fault() call if PMD is changed
mm/numa: no task_numa_fault() call if PTE is changed
mm/vmalloc: fix page mapping if vm_area_alloc_pages() with high order fallback to order 0
mm/memory-failure: use raw_spinlock_t in struct memory_failure_cpu
mm: don't account memmap per-node
mm: add system wide stats items category
mm: don't account memmap on failure
mm/hugetlb: fix hugetlb vs. core-mm PT locking
mseal: fix is_madv_discard()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc fixes from Michael Ellerman:
- Fix crashes on 85xx with some configs since the recent hugepd rework.
- Fix boot warning with hugepages and CONFIG_DEBUG_VIRTUAL on some
platforms.
- Don't enable offline cores when changing SMT modes, to match existing
userspace behaviour.
Thanks to Christophe Leroy, Dr. David Alan Gilbert, Guenter Roeck, Nysal
Jan K.A, Shrikanth Hegde, Thomas Gleixner, and Tyrel Datwyler.
* tag 'powerpc-6.11-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc/topology: Check if a core is online
cpu/SMT: Enable SMT only if a core is online
powerpc/mm: Fix boot warning with hugepages and CONFIG_DEBUG_VIRTUAL
powerpc/mm: Fix size of allocated PGDIR
soc: fsl: qbman: remove unused struct 'cgr_comp'
|
|
Pull smb client fixes from Steve French:
- fix for clang warning - additional null check
- fix for cached write with posix locks
- flexible structure fix
* tag 'v6.11-rc3-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6:
smb: smb2pdu.h: Use static_assert() to check struct sizes
smb3: fix lock breakage for cached writes
smb/client: avoid possible NULL dereference in cifs_free_subrequest()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
Pull i2c fixes from Wolfram Sang:
"I2C core fix replacing IS_ENABLED() with IS_REACHABLE()
For host drivers, there are two fixes:
- Tegra I2C Controller: Addresses a potential double-locking issue
during probe. ACPI devices are not IRQ-safe when invoking runtime
suspend and resume functions, so the irq_safe flag should not be
set.
- Qualcomm GENI I2C Controller: Fixes an oversight in the exit path
of the runtime_resume() function, which was missed in the previous
release"
* tag 'i2c-for-6.11-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
i2c: tegra: Do not mark ACPI devices as irq safe
i2c: Use IS_REACHABLE() for substituting empty ACPI functions
i2c: qcom-geni: Add missing geni_icc_disable in geni_i2c_runtime_resume
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"Two small fixes to the mpi3mr driver. One to avoid oversize
allocations in tracing and the other to fix an uninitialized spinlock
in the user to driver feature request code (used to trigger dumps and
the like)"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: mpi3mr: Avoid MAX_PAGE_ORDER WARNING for buffer allocations
scsi: mpi3mr: Add missing spin_lock_init() for mrioc->trigger_lock
|
|
Pull xfs fixes from Chandan Babu:
- Check for presence of only 'attr' feature before scrubbing an inode's
attribute fork.
- Restore the behaviour of setting AIL thread to TASK_INTERRUPTIBLE for
long (i.e. 50ms) sleep durations to prevent high load averages.
- Do not allow users to change the realtime flag of a file unless the
datadev and rtdev both support fsdax access modes.
* tag 'xfs-6.11-fixes-3' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
xfs: conditionally allow FS_XFLAG_REALTIME changes if S_DAX is set
xfs: revert AIL TASK_KILLABLE threshold
xfs: attr forks require attr, not attr2
|
|
Pull bcachefs fixes from Kent OverstreetL
- New on disk format version, bcachefs_metadata_version_disk_accounting_inum
This adds one more disk accounting counter, which counts disk usage
and number of extents per inode number. This lets us track
fragmentation, for implementing defragmentation later, and it also
counts disk usage per inode in all snapshots, which will be a useful
thing to expose to users.
- One performance issue we've observed is threads spinning when they
should be waiting for dirty keys in the key cache to be flushed by
journal reclaim, so we now have hysteresis for the waiting thread, as
well as improving the tracepoint and a new time_stat, for tracking
time blocked waiting on key cache flushing.
... and various assorted smaller fixes.
* tag 'bcachefs-2024-08-16' of git://evilpiepirate.org/bcachefs:
bcachefs: Fix locking in __bch2_trans_mark_dev_sb()
bcachefs: fix incorrect i_state usage
bcachefs: avoid overflowing LRU_TIME_BITS for cached data lru
bcachefs: Fix forgetting to pass trans to fsck_err()
bcachefs: Increase size of cuckoo hash table on too many rehashes
bcachefs: bcachefs_metadata_version_disk_accounting_inum
bcachefs: Kill __bch2_accounting_mem_mod()
bcachefs: Make bkey_fsck_err() a wrapper around fsck_err()
bcachefs: Fix warning in __bch2_fsck_err() for trans not passed in
bcachefs: Add a time_stat for blocked on key cache flush
bcachefs: Improve trans_blocked_journal_reclaim tracepoint
bcachefs: Add hysteresis to waiting on btree key cache flush
lib/generic-radix-tree.c: Fix rare race in __genradix_ptr_alloc()
bcachefs: Convert for_each_btree_node() to lockrestart_do()
bcachefs: Add missing downgrade table entry
bcachefs: disk accounting: ignore unknown types
bcachefs: bch2_accounting_invalid() fixup
bcachefs: Fix bch2_trigger_alloc when upgrading from old versions
bcachefs: delete faulty fastpath in bch2_btree_path_traverse_cached()
|
|
We run this in full RW mode now, so we have to guard against the
superblock buffer being reallocated.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Pull memcg-v1 fix from Al Viro:
"memcg_write_event_control() oops fix"
* tag 'pull-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
memcg_write_event_control(): fix a user-triggerable oops
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 fixes from Catalin Marinas:
- Fix the arm64 __get_mem_asm() to use the _ASM_EXTABLE_##type##ACCESS()
macro instead of the *_ERR() one in order to avoid writing -EFAULT to
the value register in case of a fault
- Initialise all elements of the acpi_early_node_map[] to NUMA_NO_NODE.
Prior to this fix, only the first element was initialised
- Move the KASAN random tag seed initialisation after the per-CPU areas
have been initialised (prng_state is __percpu)
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
arm64: Fix KASAN random tag seed initialization
arm64: ACPI: NUMA: initialize all values of acpi_early_node_map to NUMA_NO_NODE
arm64: uaccess: correct thinko in __get_mem_asm()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux
Pull clk fix from Stephen Boyd:
"One fix for the new T-Head TH1520 clk driver that marks a bus clk
critical so that it isn't turned off during late init which breaks
emmc-sdio"
* tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux:
clk: thead: fix dependency on clk_ignore_unused
|
|
Pull block fixes from Jens Axboe:
- Fix corruption issues with s390/dasd (Eric, Stefan)
- Fix a misuse of non irq locking grab of a lock (Li)
- MD pull request with a single data corruption fix for raid1 (Yu)
* tag 'block-6.11-20240824' of git://git.kernel.dk/linux:
block: Fix lockdep warning in blk_mq_mark_tag_wait
md/raid1: Fix data corruption for degraded array with slow disk
s390/dasd: fix error recovery leading to data corruption on ESE devices
s390/dasd: Remove DMA alignment
|
|
Pull io_uring fixes from Jens Axboe:
- Fix a comment in the uapi header using the wrong member name (Caleb)
- Fix KCSAN warning for a debug check in sqpoll (me)
- Two more NAPI tweaks (Olivier)
* tag 'io_uring-6.11-20240824' of git://git.kernel.dk/linux:
io_uring: fix user_data field name in comment
io_uring/sqpoll: annotate debug task == current with data_race()
io_uring/napi: remove duplicate io_napi_entry timeout assignation
io_uring/napi: check napi_enabled in io_napi_add() before proceeding
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux
Pull devicetree fixes from Rob Herring:
- Fix a possible (but unlikely) out-of-bounds read in interrupts
parsing code
- Add AT25 EEPROM "fujitsu,mb85rs256" compatible
- Update Konrad Dybcio's email
* tag 'devicetree-fixes-for-6.11-2' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux:
of/irq: Prevent device address out-of-bounds read in interrupt map walk
dt-bindings: eeprom: at25: add fujitsu,mb85rs256 compatible
dt-bindings: Batch-update Konrad Dybcio's email
|
|
Although there are several patches improving the extent map shrinker,
there are still reports of too frequent shrinker behavior, taking too
much CPU for the kswapd process.
So let's only enable extent shrinker for now, until we got more
comprehensive understanding and a better solution.
Link: https://lore.kernel.org/linux-btrfs/3df4acd616a07ef4d2dc6bad668701504b412ffc.camel@intelfx.name/
Link: https://lore.kernel.org/linux-btrfs/c30fd6b3-ca7a-4759-8a53-d42878bf84f7@gmail.com/
Fixes: 956a17d9d050 ("btrfs: add a shrinker for extent maps")
CC: stable@vger.kernel.org # 6.10+
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull thermal control fix from Rafael Wysocki:
"Fix a Bang-bang thermal governor issue causing it to fail to reset the
state of cooling devices if they are 'on' to start with, but the
thermal zone temperature is always below the corresponding trip point
(Rafael Wysocki)"
* tag 'thermal-6.11-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
thermal: gov_bang_bang: Use governor_data to reduce overhead
thermal: gov_bang_bang: Add .manage() callback
thermal: gov_bang_bang: Split bang_bang_control()
thermal: gov_bang_bang: Call __thermal_cdev_update() directly
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI fix from Rafael Wysocki:
"Fix an issue related to the ACPI EC device handling that causes the
_REG control method to be evaluated for EC operation regions that are
not expected to be used.
This confuses the platform firmware and provokes various types of
misbehavior on some systems (Rafael Wysocki)"
* tag 'acpi-6.11-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
ACPI: EC: Evaluate _REG outside the EC scope more carefully
ACPICA: Add a depth argument to acpi_execute_reg_methods()
Revert "ACPI: EC: Evaluate orphan _REG under EC device"
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm
Pull libnvdimm fix from Ira Weiny:
"Commit f467fee48da4 ("block: move the dax flag to queue_limits") broke
the DAX tests by skipping over the legacy pmem mapping pages case.
Set the DAX flag in this case as well"
* tag 'libnvdimm-fixes-6.11-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm:
nvdimm/pmem: Set dax flag for all 'PFN_MAP' cases
|
|
io_uring_cqe's user_data field refers to `sqe->data`, but io_uring_sqe
does not have a data field. Fix the comment to say `sqe->user_data`.
Signed-off-by: Caleb Sander Mateos <csander@purestorage.com>
Link: https://github.com/axboe/liburing/pull/1206
Link: https://lore.kernel.org/r/20240816181526.3642732-1-csander@purestorage.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Pull rust fixes from Miguel Ojeda:
- Fix '-Os' Rust 1.80.0+ builds adding more intrinsics (also tweaked in
upstream Rust for the upcoming 1.82.0).
- Fix support for the latest version of rust-analyzer due to a change
on rust-analyzer config file semantics (considered a fix since most
developers use the latest version of the tool, which is the only one
actually supported by upstream). I am discussing stability of the
config file with upstream -- they may be able to start versioning it.
- Fix GCC 14 builds due to '-fmin-function-alignment' not skipped for
libclang (bindgen).
- A couple Kconfig fixes around '{RUSTC,BINDGEN}_VERSION_TEXT' to
suppress error messages in a foreign architecture chroot and to use a
proper default format.
- Clean 'rust-analyzer' target warning due to missing recursive make
invocation mark.
- Clean Clippy warning due to missing indentation in docs.
- Clean LLVM 19 build warning due to removed 3dnow feature upstream.
* tag 'rust-fixes-6.11' of https://github.com/Rust-for-Linux/linux:
rust: x86: remove `-3dnow{,a}` from target features
kbuild: rust-analyzer: mark `rust_is_available.sh` invocation as recursive
rust: add intrinsics to fix `-Os` builds
kbuild: rust: skip -fmin-function-alignment in bindgen flags
rust: Support latest version of `rust-analyzer`
rust: macros: indent list item in `module!`'s docs
rust: fix the default format for CONFIG_{RUSTC,BINDGEN}_VERSION_TEXT
rust: suppress error messages from CONFIG_{RUSTC,BINDGEN}_VERSION_TEXT
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull RISC-V fixes from Palmer Dabbelt:
- reintroduce the text patching global icache flush
- fix syscall entry code to correctly initialize a0, which manifested
as a strace bug
- XIP kernels now map the entire kernel, which fixes boot under at
least DEBUG_VIRTUAL=y
- initialize all nodes in the acpi_early_node_map initializer
- fix OOB access in the Andes vendor extension probing code
- A new key for scalar misaligned access performance in hwprobe, which
correctly treat the values as an enum (as opposed to a bitmap)
* tag 'riscv-for-linus-6.11-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
riscv: Fix out-of-bounds when accessing Andes per hart vendor extension array
RISC-V: hwprobe: Add SCALAR to misaligned perf defines
RISC-V: hwprobe: Add MISALIGNED_PERF key
RISC-V: ACPI: NUMA: initialize all values of acpi_early_node_map to NUMA_NO_NODE
riscv: change XIP's kernel_map.size to be size of the entire kernel
riscv: entry: always initialize regs->a0 to -ENOSYS
riscv: Re-introduce global icache flush in patch_text_XXX()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull tracing fixes from Steven Rostedt:
"A couple of fixes for tracing:
- Prevent a NULL pointer dereference in the error path of RTLA tool
- Fix an infinite loop bug when reading from the ring buffer when
closed. If there's a thread trying to read the ring buffer and it
gets closed by another thread, the one reading will go into an
infinite loop when the buffer is empty instead of exiting back to
user space"
* tag 'trace-v6.11-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
rtla/osnoise: Prevent NULL dereference in error handling
tracing: Return from tracing_buffers_read() if the file has been closed
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jarkko/linux-tpmdd
Pull key fixes from Jarkko Sakkinen:
"Two bug fixes for a memory corruption bug and a memory leak bug in the
DCP trusted keys type.
Just as a reminder DCP was a crypto coprocessor in i.MX SoCs"
* tag 'keys-trusted-next-6.11-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/jarkko/linux-tpmdd:
KEYS: trusted: dcp: fix leak of blob encryption key
KEYS: trusted: fix DCP blob payload length assignment
|
|
Reported-by: syzbot+95e40eae71609e40d851@syzkaller.appspotmail.com
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Reported-by: syzbot+510b0b28f8e6de64d307@syzkaller.appspotmail.com
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
