| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
While cleaning up the code to use ufshcd_rmwl() helper, the ESI vector mask
was changed incorrectly. Fix it and also define a proper macro for the
value together with FIELD_PREP().
Reported-by: Andrew Halaney <ahalaney@redhat.com>
Fixes: 0e9f4375db1c ("scsi: ufs: qcom: Use ufshcd_rmwl() where applicable")
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20231214125532.55109-1-manivannan.sadhasivam@linaro.org
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Commit fa3dca8251c4 ("scsi: ufs: host: Rename structure ufs_dev_params
to ufs_host_params") inadvertently introduced a comment line without
'*' prefix. Format the comment section correctly.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202312171915.YhlTLvLL-lkp@intel.com/
Fixes: fa3dca8251c4 ("scsi: ufs: host: Rename structure ufs_dev_params to ufs_host_params")
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
chenxiang <chenxiang66@hisilicon.com> says:
This series contain some fixes and cleanups including:
- Set .phy_attached before notifying phyup event HISI_PHYEE_PHY_UP_PM;
- Use standard error code instead of hardcode;
- Check before using pointer variable;
- Rollback some operations if FLR failed;
- Correct the number of global debugfs registers;
Link: https://lore.kernel.org/r/1702525516-51258-1-git-send-email-chenxiang66@hisilicon.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
In function debugfs_debugfs_snapshot_global_reg_v3_hw() it uses
debugfs_axi_reg.count (which is the number of axi debugfs registers) to
acquire the number of global debugfs registers.
Use debugfs_global_reg.count to acquire the number of global debugfs
registers instead.
Fixes: 623a4b6d5c2a ("scsi: hisi_sas: Move debugfs code to v3 hw driver")
Signed-off-by: Yihang Li <liyihang9@huawei.com>
Signed-off-by: Xiang Chen <chenxiang66@hisilicon.com>
Link: https://lore.kernel.org/r/1702525516-51258-6-git-send-email-chenxiang66@hisilicon.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
We obtain the semaphore and set HISI_SAS_RESETTING_BIT in
hisi_sas_reset_prepare_v3_hw(), block the scsi host and set
HISI_SAS_REJECT_CMD_BIT in hisi_sas_controller_reset_prepare(), released
them in hisi_sas_controller_reset_done(). However, if the HW reset failure
in FLR results in early return, the semaphore and flag bits will not be
release.
Rollback some operations including clearing flags / releasing semaphore
when FLR is failed.
Fixes: e5ea48014adc ("scsi: hisi_sas: Implement handlers of PCIe FLR for v3 hw")
Signed-off-by: Yihang Li <liyihang9@huawei.com>
Signed-off-by: Xiang Chen <chenxiang66@hisilicon.com>
Link: https://lore.kernel.org/r/1702525516-51258-5-git-send-email-chenxiang66@hisilicon.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
In commit 4b329abc9180 ("scsi: hisi_sas: Move slot variable definition in
hisi_sas_abort_task()"), we move the variables slot to the function head.
However, the variable slot may be NULL, we should check it in each branch.
Fixes: 4b329abc9180 ("scsi: hisi_sas: Move slot variable definition in hisi_sas_abort_task()")
Signed-off-by: Yihang Li <liyihang9@huawei.com>
Signed-off-by: Xiang Chen <chenxiang66@hisilicon.com>
Link: https://lore.kernel.org/r/1702525516-51258-4-git-send-email-chenxiang66@hisilicon.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
In function hisi_sas_controller_prereset(), -ENOSYS (Function not
implemented) should be returned if the driver does not support .soft_reset.
Returns -EPERM (Operation not permitted) if HISI_SAS_RESETTING_BIT is
already be set.
In function _suspend_v3_hw(), returns -EPERM (Operation not permitted) if
HISI_SAS_RESETTING_BIT is already be set.
Fixes: 4522204ab218 ("scsi: hisi_sas: tidy host controller reset function a bit")
Signed-off-by: Yihang Li <liyihang9@huawei.com>
Signed-off-by: Xiang Chen <chenxiang66@hisilicon.com>
Link: https://lore.kernel.org/r/1702525516-51258-3-git-send-email-chenxiang66@hisilicon.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
HISI_PHYE_PHY_UP_PM
Currently in directly attached scenario, the phyup event
HISI_PHYE_PHY_UP_PM is notified before .phy_attached is set - this may
cause the phyup work hisi_sas_bytes_dmaed() execution failed and the
attached device will not be found.
To fix it, set .phy_attached before notifing phyup event.
Signed-off-by: Yihang Li <liyihang9@huawei.com>
Signed-off-by: Xiang Chen <chenxiang66@hisilicon.com>
Link: https://lore.kernel.org/r/1702525516-51258-2-git-send-email-chenxiang66@hisilicon.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Bean Huo <beanhuo@iokpp.de> says:
Adding RTC support for embedded storage device UFS in its driver, it
is important for a few key reasons:
1. Helps with Regular Maintenance:
The RTC provides a basic way to keep track of time, making it useful for
scheduling routine maintenance tasks in the storage device. This includes
things like making sure data is spread
evenly across the storage to extend its life.
2. Figuring Out How Old Data Is:
The RTC helps the device estimate how long ago certain parts of the storage
were last used. This is handy for deciding when to do maintenance tasks to
keep the storage working well over time.
3. Making Devices Last Longer:
By using the RTC for regular upkeep, we can make sure the storage device lasts
longer and stays reliable. This is especially important for devices that need
to work well for a long time.
4.Fitting In with Other Devices:
The inclusion of RTC support aligns with existing UFS specifications (starting
from UFS Spec 2.0) and is consistent with the prevalent industry practice. Many
UFS devices currently on the market utilize RTC for internal timekeeping. By
ensuring compatibility with this widely adopted standard, the embedded storage
device becomes seamlessly integrable with existing hardware and software
ecosystems, reducing the risk of compatibility issues.
In short, adding RTC support to embedded storage device UFS helps with regular
upkeep, extends the device's life, ensures compatibility, and keeps everything
running smoothly with the rest of the system.
Link: https://lore.kernel.org/r/20231212220825.85255-1-beanhuo@iokpp.de
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Introduce a sysfs node named 'rtc_update_ms' within the kernel, enabling
user to adjust the RTC periodic update frequency to suit the specific
requirements of the system and UFS. Also, this patch allows the user to
disable/enable periodic update RTC in the UFS idle time.
Signed-off-by: Bean Huo <beanhuo@micron.com>
Link: https://lore.kernel.org/r/20231212220825.85255-4-beanhuo@iokpp.de
Acked-by: Avri Altman <avri.altman@wdc.com>
Reviewed-by: Thomas Weißschuh <linux@weissschuh.net>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Add Real Time Clock (RTC) support for UFS device. This enhancement is
crucial for the internal maintenance operations of the UFS device. The
patch enables the device to handle both absolute and relative time
information. Furthermore, it includes periodic task to update the RTC in
accordance with the UFS Spec, ensuring the accuracy of RTC information for
the device's internal processes.
RTC and qTimestamp serve distinct purposes. The RTC provides a coarse level
of granularity with, at best, approximate single-second resolution. This
makes the RTC well-suited for the device to determine the approximate age
of programmed blocks after being updated by the host. On the other hand,
qTimestamp offers nanosecond granularity and is specifically designed for
synchronizing Device Error Log entries with corresponding host-side logs.
Given that the RTC has been a standard feature since UFS Spec 2.0, and
qTimestamp was introduced in UFS Spec 4.0, the majority of UFS devices
currently on the market rely on RTC. Therefore, it is advisable to continue
supporting RTC in the Linux kernel. This ensures compatibility with the
prevailing UFS device implementations and facilitates seamless integration
with existing hardware. By maintaining support for RTC, we ensure broad
compatibility and avoid potential issues arising from deviations in device
specifications across different UFS versions.
Signed-off-by: Bean Huo <beanhuo@micron.com>
Signed-off-by: Mike Bi <mikebi@micron.com>
Signed-off-by: Luca Porzio <lporzio@micron.com>
Link: https://lore.kernel.org/r/20231212220825.85255-3-beanhuo@iokpp.de
Acked-by: Avri Altman <avri.altman@wdc.com>
Reviewed-by: Thomas Weißschuh <linux@weissschuh.net>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Add helper inline for retrieving whether UFS device is busy or not.
Signed-off-by: Bean Huo <beanhuo@micron.com>
Link: https://lore.kernel.org/r/20231212220825.85255-2-beanhuo@iokpp.de
Reviewed-by: Avri Altman <avri.altman@wdc.com>
Reviewed-by: Thomas Weißschuh <linux@weissschuh.net>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> says:
Hello,
This series has code some cleanups to the Qcom UFS driver. No
functional change. In this version, I've removed code supporting
legacy controllers ver < 2.0, as the respective platforms were never
supported in upstream.
Tested on: RB5 development board based on Qcom SM8250 SoC.
Link: https://lore.kernel.org/r/20231208065902.11006-1-manivannan.sadhasivam@linaro.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Remove unused definitions.
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20231208065902.11006-18-manivannan.sadhasivam@linaro.org
Reviewed-by: Andrew Halaney <ahalaney@redhat.com>
Tested-by: Andrew Halaney <ahalaney@redhat.com> # sa8775p-ride
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Instead of using both ufshcd_readl() and ufshcd_writel() to read/modify/
write a register, let's make use of the existing helper.
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20231208065902.11006-17-manivannan.sadhasivam@linaro.org
Tested-by: Andrew Halaney <ahalaney@redhat.com> # sa8775p-ride
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
The legacy platforms making use of host controllers older than version 2.0
are not supported in upstream. So there is no need to carry code to support
them.
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20231208065902.11006-16-manivannan.sadhasivam@linaro.org
Tested-by: Andrew Halaney <ahalaney@redhat.com> # sa8775p-ride
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
In both the functions, UFS_PHY_SOFT_RESET contains the mask of the reset
bit. So this can be passed directly as the value to be written for
asserting the reset. For deasserting, 0 can be passed.
This gets rid of the FIELD_PREP() inside these functions and also
UFS_PHY_RESET_{ENABLE/DISABLE} definitions.
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20231208065902.11006-15-manivannan.sadhasivam@linaro.org
Reviewed-by: Andrew Halaney <ahalaney@redhat.com>
Tested-by: Andrew Halaney <ahalaney@redhat.com> # sa8775p-ride
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
ufs_qcom_set_core_clk_ctrl()
In case the "core_clk_unipro" clock is not provided, "cycles_in_1us"
variable will be used as uninitialized. So initialize it with 0.
Issue reported by Smatch tool:
drivers/ufs/host/ufs-qcom.c:1336 ufs_qcom_set_core_clk_ctrl() error: uninitialized symbol 'cycles_in_1us'.
drivers/ufs/host/ufs-qcom.c:1341 ufs_qcom_set_core_clk_ctrl() error: uninitialized symbol 'cycles_in_1us'.
Reviewed-by: Nitin Rawat <quic_nitirawa@quicinc.com>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20231208065902.11006-14-manivannan.sadhasivam@linaro.org
Tested-by: Andrew Halaney <ahalaney@redhat.com> # sa8775p-ride
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Sort includes alphabetically.
Reviewed-by: Nitin Rawat <quic_nitirawa@quicinc.com>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20231208065902.11006-13-manivannan.sadhasivam@linaro.org
Tested-by: Andrew Halaney <ahalaney@redhat.com> # sa8775p-ride
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
ufs_qcom_hosts array is assigned, but not used anywhere. So let's remove
it.
Reviewed-by: Andrew Halaney <ahalaney@redhat.com>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20231208065902.11006-12-manivannan.sadhasivam@linaro.org
Tested-by: Andrew Halaney <ahalaney@redhat.com> # sa8775p-ride
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
devm_gpiod_get_optional()
As done in other places, let's use dev_err_probe() to simplify the error
handling while acquiring the device reset gpio using
devm_gpiod_get_optional().
While at it, let's reword the error message to make it clear that the
failure is due to acquiring "device reset gpio".
Reviewed-by: Andrew Halaney <ahalaney@redhat.com>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20231208065902.11006-11-manivannan.sadhasivam@linaro.org
Tested-by: Andrew Halaney <ahalaney@redhat.com> # sa8775p-ride
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
devm_kzalloc() will itself print the error message on failure. So let's get
rid of the redundant error message in ufs_qcom_init().
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20231208065902.11006-10-manivannan.sadhasivam@linaro.org
Reviewed-by: Nitin Rawat <quic_nitirawa@quicinc.com>
Tested-by: Andrew Halaney <ahalaney@redhat.com> # sa8775p-ride
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
If ufs_qcom_power_up_sequence() fails, then it makes no sense to enable the
lane clocks and continue ufshcd_hba_enable(). So let's check the return
value of ufs_qcom_power_up_sequence().
Reviewed-by: Andrew Halaney <ahalaney@redhat.com>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20231208065902.11006-9-manivannan.sadhasivam@linaro.org
Tested-by: Andrew Halaney <ahalaney@redhat.com> # sa8775p-ride
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Even though core_reset is optional, a failure during assert/deassert should
be considered fatal, if core_reset is available. So fail
ufs_qcom_power_up_sequence() if an error happens during reset and also get
rid of the redundant warning as the ufs_qcom_host_reset() function itself
prints error messages.
Reviewed-by: Andrew Halaney <ahalaney@redhat.com>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20231208065902.11006-8-manivannan.sadhasivam@linaro.org
Tested-by: Andrew Halaney <ahalaney@redhat.com> # sa8775p-ride
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Instead of duplicating the enable/disable IRQ part, let's export the
helpers available in ufshcd driver and make use of them. This also fixes
the possible redundant IRQ disable before asserting reset (when IRQ was
already disabled).
Fixes: 4a791574a0cc ("scsi: ufs: ufs-qcom: Disable interrupt in reset path")
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20231208065902.11006-7-manivannan.sadhasivam@linaro.org
Tested-by: Andrew Halaney <ahalaney@redhat.com> # sa8775p-ride
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
core_reset is optional, so there is no need to warn the user if it is not
available.
Reviewed-by: Andrew Halaney <ahalaney@redhat.com>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20231208065902.11006-6-manivannan.sadhasivam@linaro.org
Tested-by: Andrew Halaney <ahalaney@redhat.com> # sa8775p-ride
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
There are many instances where the variable assignments are not needed.
Remove them.
Reviewed-by: Andrew Halaney <ahalaney@redhat.com>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20231208065902.11006-5-manivannan.sadhasivam@linaro.org
Tested-by: Andrew Halaney <ahalaney@redhat.com> # sa8775p-ride
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
The return value should be -ENODEV indicating that the resource is not
provided in DT, not -ENOMEM. Fix it!
Fixes: c263b4ef737e ("scsi: ufs: core: mcq: Configure resource regions")
Reviewed-by: Andrew Halaney <ahalaney@redhat.com>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20231208065902.11006-4-manivannan.sadhasivam@linaro.org
Tested-by: Andrew Halaney <ahalaney@redhat.com> # sa8775p-ride
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Currently, the function returns -EINVAL if algorithm other than AES-256-XTS
is requested. But the correct error code is -EOPNOTSUPP. Fix it!
Cc: Abel Vesa <abel.vesa@linaro.org>
Fixes: 56541c7c4468 ("scsi: ufs: ufs-qcom: Switch to the new ICE API")
Reviewed-by: Abel Vesa <abel.vesa@linaro.org>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20231208065902.11006-3-manivannan.sadhasivam@linaro.org
Tested-by: Andrew Halaney <ahalaney@redhat.com> # sa8775p-ride
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Lane clock handling can be simplified by using the clk_bulk APIs. So let's
make use of them. This also get's rid of the clock validation in the driver
as kernel should just rely on the firmware (DT/ACPI) to provide the clocks
required for proper functioning.
Reviewed-by: Andrew Halaney <ahalaney@redhat.com>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20231208065902.11006-2-manivannan.sadhasivam@linaro.org
Tested-by: Andrew Halaney <ahalaney@redhat.com> # sa8775p-ride
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Document the compatible string for the UFS found on SC7280.
Signed-off-by: Nitin Rawat <quic_nitirawa@quicinc.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Bao D. Nguyen <quic_nguyenb@quicinc.com>
Acked-by: Manivannan Sadhasivam <mani@kernel.org>
Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
Link: https://lore.kernel.org/r/20231205-sc7280-ufs-v6-1-ad6ca7796de7@fairphone.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Can Guo <quic_cang@quicinc.com> says:
This series enables HS-G5 support on SM8550.
This series is rebased on below changes from Mani -
https://patchwork.kernel.org/project/linux-scsi/patch/20230908145329.154024-1-manivannan.sadhasivam@linaro.org/
https://patchwork.kernel.org/project/linux-scsi/patch/20230908145329.154024-2-manivannan.sadhasivam@linaro.org/
This series is tested on below HW combinations -
SM8550 MTP + UFS4.0
SM8550 QRD + UFS3.1
SM8450 MTP + UFS3.1 (for regression test)
SM8350 MTP + UFS3.1 (for regression test)
Note that during reboot test on above platforms, I occasinally hit
PA (PHY) error during the 2nd init, this is not related with this
series. A fix for this is mentioned in below patchwork -
https://patchwork.kernel.org/project/linux-scsi/patch/1698145815-17396-1-git-send-email-quic_ziqichen@quicinc.com/
Also note that on platforms, which have two sets of UFS PHY settings
are provided (say G4 and no-G4, G5 and no-G5). The two sets of PHY
settings are basically programming different values to different
registers, mixing the two sets and/or overwriting one set with another
set is definitely not blessed by UFS PHY designers. For SM8550, this
series will make sure we honor the rule. However, for old targets Mani
and I will fix them in another series in future.
Link: https://lore.kernel.org/r/1701520577-31163-1-git-send-email-quic_cang@quicinc.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Start from HW ver 5, a spare register in UFS host controller is added and
used to indicate the UFS device version. The spare register is populated by
bootloader for now, but in future it will be populated by HW automatically
during link startup with its best efforts in any boot stage prior to Linux.
During host driver init, read the spare register, if it is not populated
with a UFS device version, go ahead with the dual init mechanism. If a UFS
device version is in there, use the UFS device version together with host
controller's HW version to decide the proper PHY gear which should be used
to configure the UFS PHY without going through the second init.
Signed-off-by: Bao D. Nguyen <quic_nguyenb@quicinc.com>
Signed-off-by: Can Guo <quic_cang@quicinc.com>
Link: https://lore.kernel.org/r/1701520577-31163-9-git-send-email-quic_cang@quicinc.com
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Nitin Rawat <quic_nitirawa@quicinc.com>
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8550-QRD
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
In ufs_qcom_power_up_sequence(), check return value of phy_set_mode_ext()
and stop proceeding if phy_set_mode_ext() fails.
Reviewed-by: Nitin Rawat <quic_nitirawa@quicinc.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Can Guo <quic_cang@quicinc.com>
Link: https://lore.kernel.org/r/1701520577-31163-8-git-send-email-quic_cang@quicinc.com
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8550-QRD
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Since HW ver 4, max HS gear can be get from UFS host controller's register,
use the max HS gear as the initial PHY gear instead of UFS_HS_G2, so that
we don't need to update the hard code for newer targets in future.
Reviewed-by: Nitin Rawat <quic_nitirawa@quicinc.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Can Guo <quic_cang@quicinc.com>
Link: https://lore.kernel.org/r/1701520577-31163-7-git-send-email-quic_cang@quicinc.com
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8550-QRD
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Qcom UFS hosts, with HW ver 5, can only support up to HS-G5 Rate-A due to
HW limitations. If the HS-G5 PHY gear is used, update host_params->hs_rate
to Rate-A, so that the subsequent power mode changes shall stick to Rate-A.
Reviewed-by: Nitin Rawat <quic_nitirawa@quicinc.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Can Guo <quic_cang@quicinc.com>
Link: https://lore.kernel.org/r/1701520577-31163-6-git-send-email-quic_cang@quicinc.com
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8550-QRD
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
During host driver init, the phy_gear is set to the minimum supported gear
(HS_G2). Then, during the first power mode change, the negotiated gear, say
HS-G4, is updated to the phy_gear variable so that in the second init the
updated phy_gear can be used to program the PHY.
But the current code only allows update the phy_gear to a higher value. If
one wants to start the first init with the maximum support gear, say HS-G4,
the phy_gear is not updated to HS-G3 if the device only supports HS-G3.
The original check added there is intend to make sure the phy_gear won't be
updated when gear is scaled down (during clock scaling). Update the check
so that one can start the first init with the maximum support gear without
breaking the original fix by checking the ufshcd_state, that is, allow
update to phy_gear only if power mode change is invoked from
ufshcd_probe_hba().
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Nitin Rawat <quic_nitirawa@quicinc.com>
Signed-off-by: Can Guo <quic_cang@quicinc.com>
Link: https://lore.kernel.org/r/1701520577-31163-5-git-send-email-quic_cang@quicinc.com
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8550-QRD
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Setup host power mode and its limitations during UFS host driver init to
avoid repetitive work during every power mode change.
Acked-by: Andrew Halaney <ahalaney@redhat.com>
Reviewed-by: Nitin Rawat <quic_nitirawa@quicinc.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Co-developed-by: Bao D. Nguyen <quic_nguyenb@quicinc.com>
Signed-off-by: Bao D. Nguyen <quic_nguyenb@quicinc.com>
Signed-off-by: Can Guo <quic_cang@quicinc.com>
Link: https://lore.kernel.org/r/1701520577-31163-4-git-send-email-quic_cang@quicinc.com
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8550-QRD
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
In ufs_qcom_pwr_change_notify(), host_params.hs_rate has been set to
PA_HS_MODE_B by ufshcd_init_host_param(), hence remove the duplicated line
of work. Meanwhile, removed the macro UFS_QCOM_LIMIT_HS_RATE as it is only
used here.
Reviewed-by: Nitin Rawat <quic_nitirawa@quicinc.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Andrew Halaney <ahalaney@redhat.com>
Signed-off-by: Can Guo <quic_cang@quicinc.com>
Link: https://lore.kernel.org/r/1701520577-31163-3-git-send-email-quic_cang@quicinc.com
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8550-QRD
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Structure ufs_dev_params is actually used in UFS host drivers to declare
host specific power mode parameters, like ufs_<vendor>_params or host_cap,
which makes the code not very straightforward to read. Rename the structure
ufs_dev_params to ufs_host_params and unify the declarations in all drivers
to host_params.
In addition, rename the two functions ufshcd_init_pwr_dev_param() and
ufshcd_get_pwr_dev_param() which work based on the ufs_host_params to
ufshcd_init_host_params() and ufshcd_negotiate_pwr_params() respectively to
avoid confusions.
This change does not change any functionalities or logic.
Acked-by: Andrew Halaney <ahalaney@redhat.com>
Reviewed-by: Nitin Rawat <quic_nitirawa@quicinc.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Can Guo <quic_cang@quicinc.com>
Link: https://lore.kernel.org/r/1701520577-31163-2-git-send-email-quic_cang@quicinc.com
Reviewed-by: Peter Wang <peter.wang@mediatek.com>
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8550-QRD
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Instead of copying @buf into a new buffer and carefully managing its
newline/null-terminating status, we can just use sysfs_match_string() as it
uses sysfs_streq() internally which handles newline/null-term:
| /**
| * sysfs_streq - return true if strings are equal, modulo trailing newline
| * @s1: one string
| * @s2: another string
| *
| * This routine returns true iff two strings are equal, treating both
| * NUL and newline-then-NUL as equivalent string terminations. It's
| * geared for use with sysfs input strings, which generally terminate
| * with newlines but are compared against values without newlines.
| */
| bool sysfs_streq(const char *s1, const char *s2)
| ...
Then entirely drop the now unused fcoe_parse_mode(), being careful to
change if condition from checking for FIP_CONN_TYPE_UNKNOWN to < 0 as
sysfs_match_string() can return -EINVAL. Also check explicitly if
ctlr->mode is equal to FIP_CONN_TYPE_UNKNOWN -- this is probably preferred
to "<=" as the behavior is more obvious while maintaining functionality.
To get the compiler not to complain, make fip_conn_type_names const char *
const. Perhaps, this should also be done for fcf_state_names.
This also removes an instance of strncpy() which helps [1].
Link: https://github.com/KSPP/linux/issues/90 [1]
Cc: <linux-hardening@vger.kernel.org>
Signed-off-by: Justin Stitt <justinstitt@google.com>
Link: https://lore.kernel.org/r/20231212-strncpy-drivers-scsi-fcoe-fcoe_sysfs-c-v2-1-1f2d6b2fc409@google.com
Reviewed-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Justin Tee <justintee8345@gmail.com> says:
Update lpfc to revision 14.2.0.17
This patch set contains bug fixes for the VMID feature.
The patches were cut against Martin's 6.8/scsi-queue tree.
Link: https://lore.kernel.org/r/20231207224039.35466-1-justintee8345@gmail.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Update lpfc version to 14.2.0.17
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Link: https://lore.kernel.org/r/20231207224039.35466-5-justintee8345@gmail.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
completes
If priority tagging is set in the service parameters of a FLOGI cmpl, then
we update the vmid_flag. In the current logic, if a follow up FLOGI cmpl
updates its service parameters such that priority tagging is no longer set,
then the vmid_flag ends up keeping stale data.
Fix by ensuring we clear the vmid_flag member during lpfc_reinit_vmid, and
check the priority tagging service parameter after reinitialization of the
vmid data structures.
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Link: https://lore.kernel.org/r/20231207224039.35466-4-justintee8345@gmail.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
After a follow up FDISC cmpl, an NPIV's VMID data structures are not
updated.
Fix by calling lpfc_reinit_vmid and copying the physical port's vmid_flag
to the NPIV's vmid_flag in the NPIV registration cmpl code path.
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Link: https://lore.kernel.org/r/20231207224039.35466-3-justintee8345@gmail.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
VMID driver support is a load time configuration setting. Thus, change
sysfs attributes to read only.
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Link: https://lore.kernel.org/r/20231207224039.35466-2-justintee8345@gmail.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Karan Tilak Kumar <kartilak@cisco.com> says:
Hi Martin, reviewers,
This cover letter describes the feature: add support for
multiqueue (MQ) to fnic driver.
Background: The Virtual Interface Card (VIC) firmware exposes several
queues that can be configured for sending IOs and receiving IO
responses. Unified Computing System Manager (UCSM) and Intersight
Manager (IMM) allows users to configure the number of queues to be
used for IOs.
The number of IO queues to be used is stored in a configuration file
by the VIC firmware. The fNIC driver reads the configuration file and
sets the number of queues to be used. Previously, the driver was
hard-coded to use only one queue. With this set of changes, the fNIC
driver will configure itself to use multiple queues. This feature
takes advantage of the block multiqueue layer to parallelize IOs being
sent out of the VIC card.
Here's a brief description of some of the salient patches:
- vnic_scsi.h needs to be in sync with VIC firmware to be able to read
the number of queues from the firmware config file. A patch has been
created for this.
- In an environment with many fnics (like we see in our customer
environments), it is hard to distinguish which fnic is printing logs.
Therefore, an fnic number has been included in the logs.
- read the number of queues from the firmware config file.
- include definitions in fnic.h to support multiqueue.
- modify the interrupt service routines (ISRs) to read from the
correct registers. The numbers that are used here come from discussions
with the VIC firmware team.
- track IO statistics for different queues.
- remove usage of host_lock, and only use fnic_lock in the fnic driver.
- use a hardware queue based spinlock to protect io_req.
- replace the hard-coded zeroth queue with a hardware queue number.
This presents a bulk of the changes.
- modify the definition of fnic_queuecommand to accept multiqueue tags.
- improve log messages, and indicate fnic number and multiqueue tags for
effective debugging.
Even though the patches have been made into a series, some patches are
heavier than others.
But, every effort has been made to keep the purpose of each patch as
a single-purpose, and to compile cleanly.
This patchset has been tested as a whole. Therefore, the tested-by fields
have been added only to two patches
in the set. All the individual patches compile cleanly. However,
I've refrained from adding tested-by to
most of the patches, so as to not mislead the reviewer/reader.
A brief note on the unit tests:
1. Increase number of queues to 64. Load driver. Run IOs via Medusa.
12+ hour run successful.
2. Configure multipathing, and run link flaps on single link.
IOs drop briefly, but pick up as expected.
3. Configure multipathing, and run link flaps on two links, with a
30 second delay in between. IOs drop briefly, but pick up as expected.
Repeat the above tests with 1 queue and 32 queues. All tests were
successful.
Please consider this patch series for the next merge window.
Link: https://lore.kernel.org/r/20231211173617.932990-1-kartilak@cisco.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Increment driver version for multiqueue (MQ).
Reviewed-by: Sesidhar Baddela <sebaddel@cisco.com>
Reviewed-by: Arulprabhu Ponnusamy <arulponn@cisco.com>
Signed-off-by: Karan Tilak Kumar <kartilak@cisco.com>
Link: https://lore.kernel.org/r/20231211173617.932990-14-kartilak@cisco.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Improve existing logs by adding fnic number, hardware queue, tag, and mqtag
in the prints. Add logs with the above elements for effective debugging.
Reviewed-by: Sesidhar Baddela <sebaddel@cisco.com>
Reviewed-by: Arulprabhu Ponnusamy <arulponn@cisco.com>
Tested-by: Karan Tilak Kumar <kartilak@cisco.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Karan Tilak Kumar <kartilak@cisco.com>
Link: https://lore.kernel.org/r/20231211173617.932990-13-kartilak@cisco.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Implement support for MQ in fnic driver:
The block multiqueue layer issues IO to the fnic driver with an MQ tag. Use
the mqtag and derive a tag from it. Derive the hardware queue from the
mqtag and use it in all paths. Modify queuecommand to handle mqtag.
Replace wq and cq indices to support MQ. Replace the zeroth queue with a
hardware queue. Implement spin locks on a per hardware queue basis.
Replace io_lock with per hardware queue spinlock. Implement out of range
tag checks.
Allocate an io_req_table to track status of the io_req.
Test the driver by building it, loading it, and configuring 64 queues in
UCSM. Issue IOs using Medusa on multiple fnics. Enable/disable links to
exercise the abort and clean up path.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202310300032.2awCqkfn-lkp@intel.com/
Reviewed-by: Sesidhar Baddela <sebaddel@cisco.com>
Reviewed-by: Arulprabhu Ponnusamy <arulponn@cisco.com>
Tested-by: Karan Tilak Kumar <kartilak@cisco.com>
Signed-off-by: Karan Tilak Kumar <kartilak@cisco.com>
Link: https://lore.kernel.org/r/20231211173617.932990-12-kartilak@cisco.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
