summaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2016-01-09Merge branch 'irq-urgent-for-linus' of ↵Linus Torvalds1-3/+3
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull irq fix from Ingo Molnar: "Fixes a core IRQ subsystem deadlock" * 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: genirq: Prevent chip buslock deadlock
2016-01-09Merge branch 'for-linus' of git://git.kernel.dk/linux-blockLinus Torvalds1-1/+1
Pull block revert from Jens Axboe: "The previous pull request had a split fix for NVMe, however there are corner cases where that ends up blowing up. So let's revert it for 4.4. The regression isn't introduced in this cycle, and it's "just" a performance regression, not a stability/integrity issue" * 'for-linus' of git://git.kernel.dk/linux-block: Revert "block: Split bios on chunk boundaries"
2016-01-08Merge tag 'dmaengine-fix-4.4' of git://git.infradead.org/users/vkoul/slave-dmaLinus Torvalds6-17/+16
Pull dmaengine fixes from Vinod Koul: "Late fixes for 4.4 are three fixes for drivers which include a revert of mic-x100 fix which is causing regression, xgene fix for double IRQ and async_tx fix to use GFP_NOWAIT" * tag 'dmaengine-fix-4.4' of git://git.infradead.org/users/vkoul/slave-dma: dmaengine: xgene-dma: Fix double IRQ issue by setting IRQ_DISABLE_UNLAZY flag async_tx: use GFP_NOWAIT rather than GFP_IO dmaengine: Revert "dmaengine: mic_x100: add missing spin_unlock"
2016-01-08Merge branch 'dmi-for-linus' of ↵Linus Torvalds1-3/+3
git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging Pull dmi fix from Jean Delvare. * 'dmi-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging: firmware: dmi_scan: Fix UUID endianness for SMBIOS >= 2.6
2016-01-08Merge tag 'sound-4.4' of ↵Linus Torvalds8-18/+104
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound Pull sound fixes from Takashi Iwai: "A slightly higher volume than a new year's wish, but not too worrisome: a large LOC is only for HD-audio device-specific quirks, so fairly safe to apply. The rest ASoC fixes are all trivial and small; a simple replacement of mutex call with nested lock version, a few Arizona and Realtek codec fixes, and a regression fix for Skylake firmware handling" * tag 'sound-4.4' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: ASoC: Intel: Skylake: Fix the memory leak ASoC: Intel: Skylake: Revert previous broken fix memory leak fix ASoC: Use nested lock for snd_soc_dapm_mutex_lock ASoC: rt5645: add sys clk detection ALSA: hda - Add keycode map for alc input device ALSA: hda - Add mic mute hotkey quirk for Lenovo ThinkCentre AIO ASoC: arizona: Fix bclk for sample rates that are multiple of 4kHz
2016-01-08x86/mm: Micro-optimise clflush_cache_range()Chris Wilson1-4/+6
Whilst inspecting the asm for clflush_cache_range() and some perf profiles that required extensive flushing of single cachelines (from part of the intel-gpu-tools GPU benchmarks), we noticed that gcc was reloading boot_cpu_data.x86_clflush_size on every iteration of the loop. We can manually hoist that read which perf regarded as taking ~25% of the function time for a single cacheline flush. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Ross Zwisler <ross.zwisler@linux.intel.com> Acked-by: "H. Peter Anvin" <hpa@zytor.com> Cc: Toshi Kani <toshi.kani@hpe.com> Cc: Borislav Petkov <bp@suse.de> Cc: Luis R. Rodriguez <mcgrof@suse.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Sai Praneeth <sai.praneeth.prakhya@intel.com> Link: http://lkml.kernel.org/r/1452246933-10890-1-git-send-email-chris@chris-wilson.co.uk Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2016-01-08perf evlist: Add --trace-fields option to show trace fieldsNamhyung Kim4-1/+37
To use dynamic sort keys, it might be good to add an option to see the list of field names. $ perf evlist -i perf.data.sched sched:sched_switch sched:sched_stat_wait sched:sched_stat_sleep sched:sched_stat_iowait sched:sched_stat_runtime sched:sched_process_fork sched:sched_wakeup sched:sched_wakeup_new sched:sched_migrate_task # Tip: use 'perf evlist --trace-fields' to show fields for tracepoint events $ perf evlist -i perf.data.sched --trace-fields sched:sched_switch: trace_fields: prev_comm,prev_pid,prev_prio,prev_state,next_comm,next_pid,next_prio sched:sched_stat_wait: trace_fields: comm,pid,delay sched:sched_stat_sleep: trace_fields: comm,pid,delay sched:sched_stat_iowait: trace_fields: comm,pid,delay sched:sched_stat_runtime: trace_fields: comm,pid,runtime,vruntime sched:sched_process_fork: trace_fields: parent_comm,parent_pid,child_comm,child_pid sched:sched_wakeup: trace_fields: comm,pid,prio,success,target_cpu sched:sched_wakeup_new: trace_fields: comm,pid,prio,success,target_cpu sched:sched_migrate_task: trace_fields: comm,pid,prio,orig_cpu,dest_cpu Committer notes: For another file, in verbose mode: # perf evlist -v --trace-fields sched:sched_switch: type: 2, size: 112, config: 0x10b, { sample_period, sample_freq }: 1, sample_type: IP|TID|TIME|CPU|PERIOD|RAW, disabled: 1, inherit: 1, mmap: 1, comm: 1, task: 1, sample_id_all: 1, exclude_guest: 1, mmap2: 1, comm_exec: 1, trace_fields: prev_comm,prev_pid,prev_prio,prev_state,next_comm,next_pid,next_prio # Signed-off-by: Namhyung Kim <namhyung@kernel.org> Cc: Andi Kleen <andi@firstfloor.org> Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/r/1452125549-1511-5-git-send-email-namhyung@kernel.org [ Replaced 'trace_fields=' with 'trace_fields: ' to make the output consistent in -v mode ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-01-08perf record: Store data mmaps for dwarf unwindJiri Olsa1-1/+5
Currently we don't synthesize data mmap by default. It depends on -d option, that enables data address sampling. But we've seen cases (softice) where DWARF unwinder went through non executable mmaps, which we need to lookup in MAP__VARIABLE tree. Making data mmaps to be synthesized for dwarf unwind as well. Reported-by: Noel Grandin <noelgrandin@gmail.com> Signed-off-by: Jiri Olsa <jolsa@kernel.org> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/20160107133022.GA32115@krava.brq.redhat.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-01-08perf libdw: Check for mmaps also in MAP__VARIABLE treeJiri Olsa1-0/+10
We've seen cases (softice) where DWARF unwinder went through non executable mmaps, which we need to lookup in MAP__VARIABLE tree. Reported-and-Tested-by: Noel Grandin <noelgrandin@gmail.com> Signed-off-by: Jiri Olsa <jolsa@kernel.org> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1452158050-28061-6-git-send-email-jolsa@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-01-08perf unwind: Check for mmaps also in MAP__VARIABLE treeJiri Olsa1-0/+9
We've seen cases (softice) where DWARF unwinder went through non executable mmaps, which we need to lookup in MAP__VARIABLE tree. Reported-and-Tested-by: Noel Grandin <noelgrandin@gmail.com> Signed-off-by: Jiri Olsa <jolsa@kernel.org> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1452158050-28061-5-git-send-email-jolsa@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-01-08perf unwind: Use find_map function in access_dso_memJiri Olsa1-6/+5
The find_map helper is already there, so let's use it. Also we're going to introduce wider search in following patch, so it'll be easier to make this change on single place. Signed-off-by: Jiri Olsa <jolsa@kernel.org> Tested-by: Noel Grandin <noelgrandin@gmail.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1452158050-28061-4-git-send-email-jolsa@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-01-08perf evlist: Remove perf_evlist__(enable|disable)_event functionsJiri Olsa6-54/+8
Replacing them with perf_evsel__(enable|disable). Signed-off-by: Jiri Olsa <jolsa@kernel.org> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Noel Grandin <noelgrandin@gmail.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1452158050-28061-2-git-send-email-jolsa@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-01-08perf evlist: Make perf_evlist__open() open evsels with their cpus and ↵Adrian Hunter1-1/+1
threads (like perf record does) 'perf record' uses perf_evsel__open() to open events and passes the evsel->cpus and evsel->threads. Many tests and some tools instead use perf_evlist__open() which passes instead evlist->cpus and evlist->threads. Make perf_evlist__open() follow the 'perf record' behaviour so that a consistent approach is taken. Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Noel Grandin <noelgrandin@gmail.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1452158050-28061-3-git-send-email-jolsa@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-01-08libata: skip debounce delay on link resumeDanesh Petigara3-1/+4
The link resume logic uses a 200msec delay while debouncing the SControl register. The rationale behind that delay is to accommodate some PHYs that behave badly if their SStatus/ SControl registers are pounded immediately on resume. The Broadcom STB SATA PHY does not seem to have this issue. This patch introduces a new link flag that allows platforms to skip the debounce delay if it isn't needed. Signed-off-by: Danesh Petigara <dpetigara@broadcom.com> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2016-01-08Merge tag 'omap-for-v4.4/onenand-corruption' of ↵Arnd Bergmann1-5/+9
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into fixes Pull "urgent onenand file system corruption fix for n900" from Tony Lindgren: Last minute urgent pull request to prevent file system corruption on Nokia N900. Looks like we have a GPMC bus timing bug that has gone unnoticed because of bootloader configured registers until few days ago. We are not detecting the onenand clock rate properly unless we have CONFIG_OMAP_GPMC_DEBUG set and this causes onenand corruption that can be easily be reproduced. There seems to be also an additional bug still lurking around for onenand corruption. But that is still being investigated and it does not seem to be GPMC timings related. Meanwhile, it would be good to get this fix into v4.4 to prevent wrong timings from corrupting onenand. * tag 'omap-for-v4.4/onenand-corruption' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: ARM: OMAP2+: Fix onenand rate detection to avoid filesystem corruption
2016-01-08ata: ahci_brcmstb: disable DIPM supportDanesh Petigara1-1/+1
The Broadcom STB SATA host controller does not support device initiated power management. Disable support for this feature so the driver never sends SETFEATURES commands to the device to enable/disable DIPM. Signed-off-by: Danesh Petigara <dpetigara@broadcom.com> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2016-01-08ata: ahci_brcmstb: enable support for ALPMDanesh Petigara1-0/+35
Enable support for ALPM in the host controller's capabilities register. Also adjust the PLL timeout to give it enough time to lock when the port exits slumber mode. tj: minor style updates Signed-off-by: Danesh Petigara <dpetigara@broadcom.com> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2016-01-08perf report: Show random usage tip on the help lineNamhyung Kim8-1/+58
Currently perf report only shows a help message "For a higher level overview, try: perf report --sort comm,dso" unconditionally (even if the sort keys were used). Add more help tips and show randomly. Load tips from ${prefix}/share/doc/perf-tip/tips.txt file. $ perf report | tail 0.10% swapper [kernel.vmlinux] [k] irq_exit 0.09% swapper [kernel.vmlinux] [k] flush_smp_call_function_queue 0.08% swapper [kernel.vmlinux] [k] native_write_msr_safe 0.03% swapper [kernel.vmlinux] [k] group_sched_in 0.01% perf [kernel.vmlinux] [k] native_write_msr_safe # # (Tip: Search options using a keyword: perf report -h <keyword>) # Signed-off-by: Namhyung Kim <namhyung@kernel.org> Acked-by: Ingo Molnar <mingo@kernel.org> Cc: Andi Kleen <andi@firstfloor.org> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/r/1452166913-27046-1-git-send-email-namhyung@kernel.org [ Renamed it to perf_tip() and the parameter dirname to dirpath to fix the build on older distros ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-01-08Revert "block: Split bios on chunk boundaries"Jens Axboe1-1/+1
This reverts commit d3805611130af9b911e908af9f67a3f64f4f0914. If we end up splitting on the first segment, we don't adjust the sector count. That results in hitting a BUG() with attempting to split 0 sectors. As this is just a performance issue and not a regression since 4.3 release, let's just rever this change. That gives us more time to test a real fix for 4.5, which would be marked for stable anyway.
2016-01-08perf hists: Export a couple of hist functionsNamhyung Kim2-7/+17
These are necessary for multi threaded sample processing: - hists__get__get_rotate_entries_in() - hists__collapse_insert_entry() - __hists__init() Signed-off-by: Namhyung Kim <namhyung@kernel.org> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Noel Grandin <noelgrandin@gmail.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1452158050-28061-14-git-send-email-jolsa@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-01-08perf diff: Use perf_hpp__register_sort_field interfaceJiri Olsa1-1/+1
Using perf_hpp__register_sort_field interface instead of directly adding the entry. Signed-off-by: Jiri Olsa <jolsa@kernel.org> Acked-by: Namhyung Kim <namhyung@kernel.org> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Noel Grandin <noelgrandin@gmail.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1452158050-28061-13-git-send-email-jolsa@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-01-08perf tools: Add overhead/overhead_children keys defaults via stringJiri Olsa2-12/+39
We currently set 'overhead' and 'overhead_children' as default sort keys within perf_hpp__init function by directly adding into the sort list. This patch adds 'overhead' and 'overhead_children' in text form into sort_keys and let them be added by standard sort dimension interface. We need to eliminate dirrect sort_list additions to be able to add support for hists specific sort keys. Signed-off-by: Jiri Olsa <jolsa@kernel.org> Acked-by: Namhyung Kim <namhyung@kernel.org> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Noel Grandin <noelgrandin@gmail.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1452158050-28061-12-git-send-email-jolsa@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-01-08PCI: dra7xx: Mark driver as brokenRichard Cochran1-0/+1
Mark the dra7xx PCI host driver as broken. This driver was first merged in v3.17 and has never worked. Although the driver compiles just fine, it is missing an essential device reset. If the driver is included, the kernel locks up hard shortly after booting, before any console output appears. Signed-off-by: Richard Cochran <richardcochran@gmail.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2016-01-08perf tools: Remove list entry from struct sort_entryJiri Olsa1-2/+0
It's no longer needed. Signed-off-by: Jiri Olsa <jolsa@kernel.org> Acked-by: Namhyung Kim <namhyung@kernel.org> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Noel Grandin <noelgrandin@gmail.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1452158050-28061-11-git-send-email-jolsa@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-01-08perf tools: Include all tools/lib directory for tags/cscope/TAGS targetsJiri Olsa1-1/+1
Besides lockdep we use all the 'tools/lib' code in perf, so include it completely in tags. Signed-off-by: Jiri Olsa <jolsa@kernel.org> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Noel Grandin <noelgrandin@gmail.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1452158050-28061-10-git-send-email-jolsa@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-01-08perf script: Align event name properlyJiri Olsa1-2/+22
Adding code to align event names, so we get aligned output in case of multiple events with different names. Before: $ perf script :13757 13757 163918.230829: cpu/mem-snp-none/P: ffff88085f20d010 :13757 13757 163918.230832: cpu/mem-loads,ldlat=30/P: 7f5a5f719f00 :13757 13757 163918.230835: cpu/mem-loads,ldlat=30/P: 7f5a5f719f00 :13758 13758 163918.230838: cpu/mem-snp-none/P: ffff88085f4ad810 :13758 13758 163918.154093: cpu/mem-stores/P: ffff88085bb53f28 :13757 13757 163918.155264: cpu/mem-snp-hitm/P: 601080 ... After: $ perf script :13757 13757 163918.228831: cpu/mem-snp-none/P: ffffffff81a841c0 :13757 13757 163918.228834: cpu/mem-loads,ldlat=30/P: 7f5a5f719f08 :13757 13757 163918.228837: cpu/mem-loads,ldlat=30/P: 7f5a5f719f08 :13758 13758 163918.228837: cpu/mem-snp-none/P: ffff88085f4ad800 :13758 13758 163918.154093: cpu/mem-stores/P: ffff88085bb53f28 :13757 13757 163918.155264: cpu/mem-snp-hitm/P: 601080 ... Signed-off-by: Jiri Olsa <jolsa@kernel.org> Acked-by: David Ahern <dsahern@gmail.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Noel Grandin <noelgrandin@gmail.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1452158050-28061-9-git-send-email-jolsa@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-01-08perf tools: Add missing headers in perf's MANIFESTWang Nan1-0/+2
These lost headers are found in arm64 cross buildings, failing to build perf using tarballs generated using: $ make perf-targz-src-pkg Signed-off-by: Wang Nan <wangnan0@huawei.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Zefan Li <lizefan@huawei.com> Cc: pi3orama@163.com Link: http://lkml.kernel.org/r/1452263041-225488-3-git-send-email-wangnan0@huawei.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-01-08perf tools: Do not show trace command if it's not compiled inJiri Olsa2-1/+16
The trace command still appears in help message when you run simple 'perf' command. It's because the generate-cmdlist.sh does not care about the HAVE_LIBAUDIT_SUPPORT dependency of trace command and puts it into generated common_cmds array. Wrapping trace command under HAVE_LIBAUDIT_SUPPORT dependency, which will exclude it from common_cmds array if HAVE_LIBAUDIT_SUPPORT is not set. Signed-off-by: Jiri Olsa <jolsa@kernel.org> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Noel Grandin <noelgrandin@gmail.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1452158050-28061-8-git-send-email-jolsa@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-01-08perf report: Change default to use event group viewNamhyung Kim1-0/+1
The event group view feature is to see related events together. To use the group view, events should be recorded as a group with a dedicated syntax of surrounding events by braces (-e '{ evt1, evt2, ... }'). Also 'perf report' also requires the --group option to enable it. However it's almost always beneficial to use the group view to see the group events as it's more expressive. And I think it's more natural to see events together if they are recorded as a group. Thus this patch changes the default value to enable it. If users don't want to see like it and keep the original behavior, they can set the report.group config variable to false and/or use --no-group option in the 'perf report' command line. Requested-by: Ingo Molnar <mingo@kernel.org> Signed-off-by: Namhyung Kim <namhyung@kernel.org> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Stephane Eranian <eranian@google.com> Cc: Taeung Song <treeze.taeung@gmail.com> Link: http://lkml.kernel.org/r/1448807057-3506-1-git-send-email-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-01-08perf top: Decay periods in callchainsNamhyung Kim3-0/+30
It missed to decay periods in callchains when decaying hist entries. This resulted in more than 100 percent overhead in callchains in the fractal style output. Reported-by: Arnaldo Carvalho de Melo <acme@kernel.org> Signed-off-by: Namhyung Kim <namhyung@kernel.org> Cc: Andi Kleen <andi@firstfloor.org> Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1451963160-17196-1-git-send-email-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-01-08drivers: libata-core: Use usleep_range() instead of msleep() for short ↵Anil Veliyankara Madam1-1/+7
sleeps (<20 ms) Since msleep() may sleep longer than intended time for values less than 20ms, this patch allows the use of usleep_range for waits less that 20ms. usleep_range is a finer precision implementation of msleep and is designed to be a drop-in replacement for udelay where a precise sleep/busy-wait is unnecessary. More details can be found at http://lkml.org/lkml/2007/8/3/250 and in Documentation/timers/timers-howto.txt. This change has been done to improve the performace in PIO6 mode which is used by viking flash. Cc: xe-kernel@external.cisco.com Signed-off-by: Anil Veliyankara Madam <aveliyan@cisco.com> Signed-off-by: Shikha Jain <shikjain@cisco.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2016-01-08tools lib: Move bitmap.[ch] from tools/perf/ to tools/{lib,include}/Arnaldo Carvalho de Melo4-1/+6
So that lib/find_bit.c doesn't requires anything inside tools/perf/ Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Borislav Petkov <bp@suse.de> Cc: David Ahern <dsahern@gmail.com> Cc: George Spelvin <linux@horizon.com Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Rasmus Villemoes <linux@rasmusvillemoes.dk> Cc: Wang Nan <wangnan0@huawei.com> Cc: Yury Norov <yury.norov@gmail.com> Link: http://lkml.kernel.org/n/tip-7lxe7jgohaac5faodndhdmvk@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-01-08tools lib: Sync tools/lib/find_bit.c with the kernelArnaldo Carvalho de Melo2-54/+51
Need to move the bitmap.[ch] things from tools/perf/ to tools/lib, will be done in the next patches. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Borislav Petkov <bp@suse.de> Cc: David Ahern <dsahern@gmail.com> Cc: George Spelvin <linux@horizon.com Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Rasmus Villemoes <linux@rasmusvillemoes.dk> Cc: Wang Nan <wangnan0@huawei.com> Cc: Yury Norov <yury.norov@gmail.com> Link: http://lkml.kernel.org/n/tip-5fys65wkd7gu8j7a7xgukc5t@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-01-08tools lib: Move find_next_bit.c to tools/lib/Arnaldo Carvalho de Melo4-6/+6
The commit that introduced it should've moved it to the same place, plus the 'tools/' prefix, but instead moved it to a bogus tools/lib/util/ directory, being the only file there. Move it to tools/lib/find_bit.c, picking the name for the file where these routines live since: 8f6f19dd5143 ("lib: move find_last_bit to lib/find_next_bit.c") Next step is to make tools/lib/find_bit.c to differ from lib/find_bit.c just in removing what is not used by tools/. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Borislav Petkov <bp@suse.de> Cc: David Ahern <dsahern@gmail.com> Cc: George Spelvin <linux@horizon.com Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Rasmus Villemoes <linux@rasmusvillemoes.dk> Cc: Wang Nan <wangnan0@huawei.com> Cc: Yury Norov <yury.norov@gmail.com> Link: http://lkml.kernel.org/n/tip-p391cex5mqvahp4pwrton87n@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-01-08ld-version: Fix it on FedoraMichael S. Tsirkin1-0/+2
On Fedora 23, ld --version outputs: GNU ld version 2.25-15.fc23 But ld-version.sh fails to parse this, so e.g. mips build fails to enable VDSO, printing a warning that binutils >= 2.24 is required. To fix, teach ld-version to parse this format. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Cc: linux-kernel@vger.kernel.org Cc: Michal Marek <mmarek@suse.com> Cc: linux-kbuild@vger.kernel.org Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/12023/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-01-08firmware: dmi_scan: Fix UUID endianness for SMBIOS >= 2.6Andrea Arcangeli1-3/+3
The dmi_ver wasn't updated correctly before the dmi_decode method run to save the uuid. That resulted in "dmidecode -s system-uuid" and /sys/class/dmi/id/product_uuid disagreeing. The latter was buggy and this fixes it. Reported-by: Federico Simoncelli <fsimonce@redhat.com> Fixes: 9f9c9cbb6057 ("drivers/firmware/dmi_scan.c: fetch dmi version from SMBIOS if it exists") Fixes: 79bae42d51a5 ("dmi_scan: refactor dmi_scan_machine(), {smbios,dmi}_present()") Signed-off-by: Andrea Arcangeli <aarcange@redhat.com> Signed-off-by: Jean Delvare <jdelvare@suse.de>
2016-01-08ACPI / property: avoid leaking format string into kobject nameKees Cook1-1/+1
The dn->name is expected to be used as a literal, so add the missing "%s". Fixes: 263b4c1a64bc (ACPI / property: Expose data-only subnodes via sysfs) Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-01-08Merge branch 'drm-fixes' of git://people.freedesktop.org/~airlied/linuxLinus Torvalds1-0/+1
Pull drm nouveau fix from Dave Airlie: "Still not back to work, but I decided to forward this fix" * 'drm-fixes' of git://people.freedesktop.org/~airlied/linux: drm/nouveau/gr/nv40: fix oops in interrupt handler
2016-01-07Merge tag 'iommu-fixes-v4.4-rc8' of ↵Linus Torvalds2-4/+9
git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu Pull IOMMU fixes from Joerg Roedel: - Two build issues, one in the ipmmu-vmsa driver and one for the new generic dma-api implemention used on arm64 - A performance fix for said dma-api implemention - An issue caused by a wrong offset in map_sg in the same code as above * tag 'iommu-fixes-v4.4-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: iommu/dma: Use correct offset in map_sg iommu/ipmmu-vmsa: Don't truncate ttbr if LPAE is not enabled iommu/dma: Avoid unlikely high-order allocations iommu/dma: Add some missing #includes
2016-01-07Merge tag 'trace-v4.4-rc4-4' of ↵Linus Torvalds2-0/+7
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace Pull ftrace fix from Steven Rostedt: "PeiyangX Qiu reported that if a module fails to load between calling ftrace_module_init() and do_init_module() that the allocations made in ftrace_module_init() will not be freed, resulting in a memory leak. The solution is to call ftrace_release_mod() on the failing module in the fail path befor do_init_module() is called. This will remove any allocations made for that module, and nothing if ftrace_module_init() wasn't called yet for that module. Note, once do_init_module() is called, the MODULE_GOING notifiers are called for the failed module, which calls into the ftrace code to do the proper clean up (basically calling ftrace_release_mod())" * tag 'trace-v4.4-rc4-4' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: ftrace/module: Call clean up function when module init fails early
2016-01-07perf tests: Give a bit more information on the CQM test failure pathArnaldo Carvalho de Melo1-1/+1
Before: $ perf test -v cqm 48: Test intel cqm nmi context read : --- start --- test child forked, pid 1681 parse_events failed test child finished with -2 ---- end ---- Test intel cqm nmi context read: Skip $ After: $ perf test -v cqm 48: Test intel cqm nmi context read : --- start --- test child forked, pid 1681 parse_events failed, is "intel_cqm/llc_occupancy/" available? test child finished with -2 ---- end ---- Test intel cqm nmi context read: Skip $ Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Matt Fleming <matt.fleming@intel.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/n/tip-eidpiv5x4nkbsx37xwikbnir@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-01-07perf tests: No need to set attr.sample_freq for tracking !PERF_RECORD_SAMPLEArnaldo Carvalho de Melo1-1/+0
We were asking for a 4kHz sample_freq, making the test fail needlessly when the system reduced /proc/sys/kernel/perf_event_max_sample_rate below that. Before: # perf test -vv dummy 23: Test using a dummy software event to keep tracking : --- start --- test child forked, pid 32421 ------------------------------------------------------------ perf_event_attr: type 1 size 112 config 0x9 { sample_period, sample_freq } 4000 sample_type IP|TID|ID|PERIOD <SNIP> sys_perf_event_open failed, error -22 Unable to open dummy and cycles event test child finished with -2 ---- end ---- Test using a dummy software event to keep tracking: Skip # [root@zoo ~]# cat /proc/sys/kernel/perf_event_max_sample_rate 1000 After: [root@zoo ~]# perf test dummy 23: Test using a dummy software event to keep tracking : Ok Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/n/tip-487iquegrs2379e5n0pi0tcp@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-01-07perf python: Add missing files to binding link listArnaldo Carvalho de Melo1-0/+2
Fixing this problem, introduced recently: $ perf test python 16: Try 'import perf' in python, checking link problems : FAILED! In verbose mode we find out what is missing: $ perf test -v python 16: Try 'import perf' in python, checking link problems : --- start --- test child forked, pid 24894 Traceback (most recent call last): File "<stdin>", line 1, in <module> ImportError: /tmp/build/perf/python/perf.so: undefined symbol: find_next_bit test child finished with -1 ---- end ---- Try 'import perf' in python, checking link problems: FAILED! $ Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Fixes: f77b57ad4fc4 ("perf cpu_map: Add cpu_map__new_event function") Link: http://lkml.kernel.org/n/tip-rajx0zkz6czdrnvvwf0jp76p@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-01-07ftrace/module: Call clean up function when module init fails earlySteven Rostedt (Red Hat)2-0/+7
If the module init code fails after calling ftrace_module_init() and before calling do_init_module(), we can suffer from a memory leak. This is because ftrace_module_init() allocates pages to store the locations that ftrace hooks are placed in the module text. If do_init_module() fails, it still calls the MODULE_GOING notifiers which will tell ftrace to do a clean up of the pages it allocated for the module. But if load_module() fails before then, the pages allocated by ftrace_module_init() will never be freed. Call ftrace_release_mod() on the module if load_module() fails before getting to do_init_module(). Link: http://lkml.kernel.org/r/567CEA31.1070507@intel.com Reported-by: "Qiu, PeiyangX" <peiyangx.qiu@intel.com> Fixes: a949ae560a511 "ftrace/module: Hardcode ftrace_module_init() call into load_module()" Cc: stable@vger.kernel.org # v2.6.38+ Acked-by: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2016-01-07perf test: No need for setting attr.sample_freq on the RECORD testArnaldo Carvalho de Melo1-1/+0
We're not looking at PERF_RECORD_SAMPLE entries and now by default we use PERF_COUNT_SW_DUMMY, so just remove that setting. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/n/tip-cly7cnotktv5rqao13pkorem@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-01-07perf test: Use "dummy" events in the PERF_RECORD_ testArnaldo Carvalho de Melo1-1/+4
As we're test just the !PERF_RECORD_SAMPLE records. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/n/tip-qp8radcz3il4q9wbnseh337d@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-01-07perf evlist: Introduce perf_evlist__new_dummy constructorArnaldo Carvalho de Melo2-0/+31
For case where all we need is an evlist with just an "dummy" evsel, like in some 'perf test' entries. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/n/tip-q52le0pblm2k3ncvyilelr9z@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-01-07workqueue: simplify the apply_workqueue_attrs_locked()wanghaibin1-7/+4
If the apply_wqattrs_prepare() returns NULL, it has already cleaned up the related resources, so it can return directly and avoid calling the clean up function again. This doesn't introduce any functional changes. Signed-off-by: wanghaibin <wanghaibin.wang@huawei.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2016-01-07dts: vt8500: Add SDHC node to DTS file for WM8650Roman Volkov1-0/+9
Since WM8650 has the same 'WMT' SDHC controller as WM8505, and the driver is already in the kernel, this node enables the controller support for WM8650 Signed-off-by: Roman Volkov <rvolkov@v1ros.org> Reviewed-by: Alexey Charkov <alchark@gmail.com> Cc: stable@vger.kernel.org Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2016-01-07ARM: Fix broken USB support in multi_v7_defconfig for sunxi devicesTimo Sigurdsson1-0/+1
Commit 69fb4dcada77 ("power: Add an axp20x-usb-power driver") introduced a new driver for the USB power supply used on various Allwinner based SBCs. However, the driver was not added to multi_v7_defconfig which breaks USB support for some boards (e.g. LeMaker BananaPi) as the kernel will now turn off the USB power supply during boot by default if the driver isn't present. (This was not the case in linux 4.3 or lower where the USB power was always left on.) Hence, add the driver to multi_v7_defconfig in order to keep USB support working on those boards that require it. Signed-off-by: Timo Sigurdsson <public_timo.s@silentcreek.de> Tested-by: Timo Sigurdsson <public_timo.s@silentcreek.de> Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
generated by cgit v1.2.3 (git 2.39.0) at 2024-08-04 06:21:21 +0300