Age | Commit message (Collapse) | Author | Files | Lines |
|
amt test uses the TTL iptables module:
ip netns exec "${RELAY}" iptables -t mangle -I PREROUTING \
-d 239.0.0.1 -j TTL --ttl-set 2
Fixes: c08e8baea78e ("selftests: add amt interface selftest script")
Link: https://lore.kernel.org/r/20240131165605.4051645-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Benjamin Poirier says:
====================
selftests: net: More small fixes
Some small fixes for net selftests which follow from these recent commits:
dd2d40acdbb2 ("selftests: bonding: Add more missing config options")
49078c1b80b6 ("selftests: forwarding: Remove executable bits from lib.sh")
====================
Link: https://lore.kernel.org/r/20240131140848.360618-1-bpoirier@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Some scripts are not tests themselves; they contain utility functions used
by other tests. According to Documentation/dev-tools/kselftest.rst, such
files should be listed in TEST_FILES. Currently they are incorrectly listed
in TEST_PROGS_EXTENDED so rename the variable.
Fixes: c085dbfb1cfc ("selftests/net/forwarding: define libs as TEST_PROGS_EXTENDED")
Suggested-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Benjamin Poirier <bpoirier@nvidia.com>
Link: https://lore.kernel.org/r/20240131140848.360618-6-bpoirier@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Some scripts are not tests themselves; they contain utility functions used
by other tests. According to Documentation/dev-tools/kselftest.rst, such
files should be listed in TEST_FILES. Move those utility scripts to
TEST_FILES.
Fixes: 1751eb42ddb5 ("selftests: net: use TEST_PROGS_EXTENDED")
Fixes: 25ae948b4478 ("selftests/net: add lib.sh")
Fixes: b99ac1841147 ("kselftests/net: add missed setup_loopback.sh/setup_veth.sh to Makefile")
Fixes: f5173fe3e13b ("selftests: net: included needed helper in the install targets")
Suggested-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Benjamin Poirier <bpoirier@nvidia.com>
Link: https://lore.kernel.org/r/20240131140848.360618-5-bpoirier@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
setup_loopback.sh and net_helper.sh are meant to be sourced from other
scripts, not executed directly. Therefore, remove the executable bits from
those files' permissions.
This change is similar to commit 49078c1b80b6 ("selftests: forwarding:
Remove executable bits from lib.sh")
Fixes: 7d1575014a63 ("selftests/net: GRO coalesce test")
Fixes: 3bdd9fd29cb0 ("selftests/net: synchronize udpgro tests' tx and rx connection")
Suggested-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Benjamin Poirier <bpoirier@nvidia.com>
Link: https://lore.kernel.org/r/20240131140848.360618-4-bpoirier@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The purpose of the test_LAG_cleanup() function is to check that some
hardware addresses are removed from underlying devices after they have been
unenslaved. The test function simply checks that those addresses are not
present at the end. However, if the addresses were never added to begin
with due to some error in device setup, the test function currently passes.
This is a false positive since in that situation the test did not actually
exercise the intended functionality.
Add a check that the expected addresses are indeed present after device
setup. This makes the test function more robust.
I noticed this problem when running the team/dev_addr_lists.sh test on a
system without support for dummy and ipv6:
tools/testing/selftests/drivers/net/team# ./dev_addr_lists.sh
Error: Unknown device type.
Error: Unknown device type.
This program is not intended to be run as root.
RTNETLINK answers: Operation not supported
TEST: team cleanup mode lacp [ OK ]
Fixes: bbb774d921e2 ("net: Add tests for bonding and team address list management")
Signed-off-by: Benjamin Poirier <bpoirier@nvidia.com>
Link: https://lore.kernel.org/r/20240131140848.360618-3-bpoirier@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Similar to commit dd2d40acdbb2 ("selftests: bonding: Add more missing
config options"), add more networking-specific config options which are
needed for team device tests.
For testing, I used the minimal config generated by virtme-ng and I added
the options in the config file. Afterwards, the team device test passed.
Fixes: bbb774d921e2 ("net: Add tests for bonding and team address list management")
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Benjamin Poirier <bpoirier@nvidia.com>
Link: https://lore.kernel.org/r/20240131140848.360618-2-bpoirier@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
In commit ac5047671758 ("hv_netvsc: Disable NAPI before closing the
VMBus channel"), napi_disable was getting called for all channels,
including all subchannels without confirming if they are enabled or not.
This caused hv_netvsc getting hung at napi_disable, when netvsc_probe()
has finished running but nvdev->subchan_work has not started yet.
netvsc_subchan_work() -> rndis_set_subchannel() has not created the
sub-channels and because of that netvsc_sc_open() is not running.
netvsc_remove() calls cancel_work_sync(&nvdev->subchan_work), for which
netvsc_subchan_work did not run.
netif_napi_add() sets the bit NAPI_STATE_SCHED because it ensures NAPI
cannot be scheduled. Then netvsc_sc_open() -> napi_enable will clear the
NAPIF_STATE_SCHED bit, so it can be scheduled. napi_disable() does the
opposite.
Now during netvsc_device_remove(), when napi_disable is called for those
subchannels, napi_disable gets stuck on infinite msleep.
This fix addresses this problem by ensuring that napi_disable() is not
getting called for non-enabled NAPI struct.
But netif_napi_del() is still necessary for these non-enabled NAPI struct
for cleanup purpose.
Call trace:
[ 654.559417] task:modprobe state:D stack: 0 pid: 2321 ppid: 1091 flags:0x00004002
[ 654.568030] Call Trace:
[ 654.571221] <TASK>
[ 654.573790] __schedule+0x2d6/0x960
[ 654.577733] schedule+0x69/0xf0
[ 654.581214] schedule_timeout+0x87/0x140
[ 654.585463] ? __bpf_trace_tick_stop+0x20/0x20
[ 654.590291] msleep+0x2d/0x40
[ 654.593625] napi_disable+0x2b/0x80
[ 654.597437] netvsc_device_remove+0x8a/0x1f0 [hv_netvsc]
[ 654.603935] rndis_filter_device_remove+0x194/0x1c0 [hv_netvsc]
[ 654.611101] ? do_wait_intr+0xb0/0xb0
[ 654.615753] netvsc_remove+0x7c/0x120 [hv_netvsc]
[ 654.621675] vmbus_remove+0x27/0x40 [hv_vmbus]
Cc: stable@vger.kernel.org
Fixes: ac5047671758 ("hv_netvsc: Disable NAPI before closing the VMBus channel")
Signed-off-by: Souradeep Chakrabarti <schakrabarti@linux.microsoft.com>
Reviewed-by: Dexuan Cui <decui@microsoft.com>
Reviewed-by: Haiyang Zhang <haiyangz@microsoft.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/1706686551-28510-1-git-send-email-schakrabarti@linux.microsoft.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Invoking the make_tx_response() / push_tx_responses() pair with no lock
held would be acceptable only if all such invocations happened from the
same context (NAPI instance or dealloc thread). Since this isn't the
case, and since the interface "spec" also doesn't demand that multicast
operations may only be performed with no in-flight transmits,
MCAST_{ADD,DEL} processing also needs to acquire the response lock
around the invocations.
To prevent similar mistakes going forward, "downgrade" the present
functions to private helpers of just the two remaining ones using them
directly, with no forward declarations anymore. This involves renaming
what so far was make_tx_response(), for the new function of that name
to serve the new (wrapper) purpose.
While there,
- constify the txp parameters,
- correct xenvif_idx_release()'s status parameter's type,
- rename {,_}make_tx_response()'s status parameters for consistency with
xenvif_idx_release()'s.
Fixes: 210c34dcd8d9 ("xen-netback: add support for multicast control")
Cc: stable@vger.kernel.org
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Paul Durrant <paul@xen.org>
Link: https://lore.kernel.org/r/980c6c3d-e10e-4459-8565-e8fbde122f00@suse.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The documentation is pointing to the wrong path for the interface.
Documentation is pointing to /sys/class/<iface>, instead of
/sys/class/net/<iface>.
Fix it by adding the `net/` directory before the interface.
Fixes: 1a02ef76acfa ("net: sysfs: add documentation entries for /sys/class/<iface>/queues")
Signed-off-by: Breno Leitao <leitao@debian.org>
Link: https://lore.kernel.org/r/20240131102150.728960-2-leitao@debian.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Jiri Pirko says:
====================
dpll: expose lock status error value to user
From: Jiri Pirko <jiri@nvidia.com>
Allow to expose lock status errort value over new DPLL generic netlink
attribute. Extend the lock_status_get() op by new argument to get the
value from the driver. Implement this new argument fill-up
in mlx5 driver.
====================
Link: https://lore.kernel.org/r/20240130120831.261085-1-jiri@resnulli.us
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Fill-up the lock status error value properly.
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Acked-by: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Pass additional argunent status_error over lock_status_get()
so drivers can fill it up. In case they do, expose the value over
previously introduced attribute to user. Do it only in case the
current lock_status is either "unlocked" or "holdover".
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Acked-by: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
If the dpll devices goes to state "unlocked" or "holdover", it may be
caused by an error. In that case, allow user to see what the error was.
Introduce a new attribute and values it can carry.
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Acked-by: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
XDP queues are created/destroyed when a XDP program
is attached/detached. In current driver xdp_queues are not
getting destroyed on program exit due to incorrect xdp_queue
and tot_tx_queue count values.
This patch fixes the issue by setting tot_tx_queue and xdp_queue
count to correct values. It also fixes xdp.data_hard_start address.
Fixes: 06059a1a9a4a ("octeontx2-pf: Add XDP support to netdev PF")
Signed-off-by: Geetha sowjanya <gakula@marvell.com>
Link: https://lore.kernel.org/r/20240130120610.16673-1-gakula@marvell.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
David Arinzon says:
====================
ENA driver changes
From: David Arinzon <darinzon@amazon.com>
This patchset contains a set of minor and cosmetic
changes to the ENA driver.
Changes from v1:
- Address comments from Shannon Nelson
====================
Link: https://lore.kernel.org/r/20240130095353.2881-1-darinzon@amazon.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
This patch reduces some of the lines by removing newlines
where more variables or print strings can be pushed back
to the previous line while still adhering to the styling
guidelines.
Signed-off-by: David Arinzon <darinzon@amazon.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Fail queue size calculation when the device returns maximum
TX/RX queue sizes that are smaller than the allowed minimum.
Signed-off-by: Osama Abboud <osamaabb@amazon.com>
Signed-off-by: David Arinzon <darinzon@amazon.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
The netif_* functions are used by the driver to log events into the
kernel ring (dmesg) similar to the netdev_* ones. Unlike the latter,
the netif_* function family allow the user to choose what events get
logged using ethtool:
sudo ethtool -s [interface] msglvl [msg_type] on
By default the events which get logged are slow-path related and aren't
printed often (e.g. interface up related prints). This patch removes the
NETIF_MSG_TX_DONE type (called every TX completion polling) from the
defaults and adds NETIF_MSG_IFDOWN instead as it makes more sensible
defaults.
This patch also transforms ena_down() print from netif_info into
netif_dbg (same as the analogue print in ena_up()) as it suits it
better.
Signed-off-by: Shay Agroskin <shayagr@amazon.com>
Signed-off-by: David Arinzon <darinzon@amazon.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Move skb_tx_timestamp() closer to the actual time the driver sends the
packets to the device.
Signed-off-by: Osama Abboud <osamaabb@amazon.com>
Signed-off-by: David Arinzon <darinzon@amazon.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
The function responsible for polling TX completions might not receive
the CPU resources it needs due to higher priority tasks running on the
requested core.
The driver might not be able to recognize such cases, but it can use its
state to suspect that they happened. If both conditions are met:
- napi hasn't been executed more than the TX completion timeout value
- napi is scheduled (meaning that we've received an interrupt)
Then it's more likely that the napi handler isn't scheduled because of
an overloaded CPU.
It was decided that for this case, the driver would wait twice as long
as the regular timeout before scheduling a reset.
The driver uses ENA_REGS_RESET_SUSPECTED_POLL_STARVATION reset reason to
indicate this case to the device.
This patch also adds more information to the ena_tx_timeout() callback.
This function is called by the kernel when it detects that a specific TX
queue has been closed for too long.
Signed-off-by: Shay Agroskin <shayagr@amazon.com>
Signed-off-by: David Arinzon <darinzon@amazon.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
The print was re-worded to a more informative one.
Signed-off-by: Shahar Itzko <itzko@amazon.com>
Signed-off-by: David Arinzon <darinzon@amazon.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
The functionality was added to allow the drivers to create an
SQ and CQ of different sizes.
When the RX/TX SQ and CQ have the same size, such update isn't
necessary as the device can safely assume it doesn't override
unprocessed completions. However, if the SQ is larger than the CQ,
the device might "have" more completions it wants to update about
than there's room in the CQ.
There's no support for different SQ and CQ sizes, therefore,
removing the API and its usage.
'____cacheline_aligned' compiler attribute was added to
'struct ena_com_io_cq' to ensure that the removal of the
'cq_head_db_reg' field doesn't change the cache-line layout
of this struct.
Signed-off-by: Shay Agroskin <shayagr@amazon.com>
Signed-off-by: David Arinzon <darinzon@amazon.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Dynamic Interrupt Moderation (DIM) is a technique
designed to balance the need for timely data processing
with the desire to minimize CPU overhead.
Instead of generating an interrupt for every received
packet, the system can dynamically adjust the rate at
which interrupts are generated based on the incoming
traffic patterns.
Enabling DIM by default to improve the user experience.
DIM can be turned on/off through ethtool:
`ethtool -C <interface> adaptive-rx <on/off>`
Signed-off-by: Arthur Kiyanovski <akiyano@amazon.com>
Signed-off-by: Osama Abboud <osamaabb@amazon.com>
Signed-off-by: David Arinzon <darinzon@amazon.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
A few changes for better readability and style
1. Adding / Removing newlines
2. Removing an unnecessary and confusing comment
3. Using an existing variable rather than re-checking a field
Signed-off-by: Shay Agroskin <shayagr@amazon.com>
Signed-off-by: Arthur Kiyanovski <akiyano@amazon.com>
Signed-off-by: David Arinzon <darinzon@amazon.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
This patch contains more details about the functionality
of RX copybreak.
Signed-off-by: Shay Agroskin <shayagr@amazon.com>
Signed-off-by: David Arinzon <darinzon@amazon.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Remove io_sq->header_addr field because it is no longer
in use.
LLQ was updated to support a bounce buffer so there is
no need in saving the header address of the sq.
Signed-off-by: Nati Koler <nkoler@amazon.com>
Signed-off-by: David Arinzon <darinzon@amazon.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Souradeep Chakrabarti says:
====================
net: mana: Assigning IRQ affinity on HT cores
This patch set introduces a new helper function irq_setup(),
to optimize IRQ distribution for MANA network devices.
The patch set makes the driver working 15% faster than
with cpumask_local_spread().
====================
Link: https://lore.kernel.org/r/1706509267-17754-1-git-send-email-schakrabarti@linux.microsoft.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Existing MANA design assigns IRQ to every CPU, including sibling
hyper-threads. This may cause multiple IRQs to be active simultaneously
in the same core and may reduce the network performance.
Improve the performance by assigning IRQ to non sibling CPUs in local
NUMA node. The performance improvement we are getting using ntttcp with
following patch is around 15 percent against existing design and
approximately 11 percent, when trying to assign one IRQ in each core
across NUMA nodes, if enough cores are present.
The change will improve the performance for the system
with high number of CPU, where number of CPUs in a node is more than
64 CPUs. Nodes with 64 CPUs or less than 64 CPUs will not be affected
by this change.
The performance study was done using ntttcp tool in Azure.
The node had 2 nodes with 32 cores each, total 128 vCPU and number of channels
were 32 for 32 RX rings.
The below table shows a comparison between existing design and new
design:
IRQ node-num core-num CPU performance(%)
1 0 | 0 0 | 0 0 | 0-1 0
2 0 | 0 0 | 1 1 | 2-3 3
3 0 | 0 1 | 2 2 | 4-5 10
4 0 | 0 1 | 3 3 | 6-7 15
5 0 | 0 2 | 4 4 | 8-9 15
...
...
25 0 | 0 12| 24 24| 48-49 12
...
32 0 | 0 15| 31 31| 62-63 12
33 0 | 0 16| 0 32| 0-1 10
...
64 0 | 0 31| 31 63| 62-63 0
Signed-off-by: Souradeep Chakrabarti <schakrabarti@linux.microsoft.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Souradeep investigated that the driver performs faster if IRQs are
spread on CPUs with the following heuristics:
1. No more than one IRQ per CPU, if possible;
2. NUMA locality is the second priority;
3. Sibling dislocality is the last priority.
Let's consider this topology:
Node 0 1
Core 0 1 2 3
CPU 0 1 2 3 4 5 6 7
The most performant IRQ distribution based on the above topology
and heuristics may look like this:
IRQ Nodes Cores CPUs
0 1 0 0-1
1 1 1 2-3
2 1 0 0-1
3 1 1 2-3
4 2 2 4-5
5 2 3 6-7
6 2 2 4-5
7 2 3 6-7
The irq_setup() routine introduced in this patch leverages the
for_each_numa_hop_mask() iterator and assigns IRQs to sibling groups
as described above.
According to [1], for NUMA-aware but sibling-ignorant IRQ distribution
based on cpumask_local_spread() performance test results look like this:
./ntttcp -r -m 16
NTTTCP for Linux 1.4.0
---------------------------------------------------------
08:05:20 INFO: 17 threads created
08:05:28 INFO: Network activity progressing...
08:06:28 INFO: Test run completed.
08:06:28 INFO: Test cycle finished.
08:06:28 INFO: ##### Totals: #####
08:06:28 INFO: test duration :60.00 seconds
08:06:28 INFO: total bytes :630292053310
08:06:28 INFO: throughput :84.04Gbps
08:06:28 INFO: retrans segs :4
08:06:28 INFO: cpu cores :192
08:06:28 INFO: cpu speed :3799.725MHz
08:06:28 INFO: user :0.05%
08:06:28 INFO: system :1.60%
08:06:28 INFO: idle :96.41%
08:06:28 INFO: iowait :0.00%
08:06:28 INFO: softirq :1.94%
08:06:28 INFO: cycles/byte :2.50
08:06:28 INFO: cpu busy (all) :534.41%
For NUMA- and sibling-aware IRQ distribution, the same test works
15% faster:
./ntttcp -r -m 16
NTTTCP for Linux 1.4.0
---------------------------------------------------------
08:08:51 INFO: 17 threads created
08:08:56 INFO: Network activity progressing...
08:09:56 INFO: Test run completed.
08:09:56 INFO: Test cycle finished.
08:09:56 INFO: ##### Totals: #####
08:09:56 INFO: test duration :60.00 seconds
08:09:56 INFO: total bytes :741966608384
08:09:56 INFO: throughput :98.93Gbps
08:09:56 INFO: retrans segs :6
08:09:56 INFO: cpu cores :192
08:09:56 INFO: cpu speed :3799.791MHz
08:09:56 INFO: user :0.06%
08:09:56 INFO: system :1.81%
08:09:56 INFO: idle :96.18%
08:09:56 INFO: iowait :0.00%
08:09:56 INFO: softirq :1.95%
08:09:56 INFO: cycles/byte :2.25
08:09:56 INFO: cpu busy (all) :569.22%
[1] https://lore.kernel.org/all/20231211063726.GA4977@linuxonhyperv3.guj3yctzbm1etfxqx2vob5hsef.xx.internal.cloudapp.net/
Signed-off-by: Yury Norov <yury.norov@gmail.com>
Co-developed-by: Souradeep Chakrabarti <schakrabarti@linux.microsoft.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Now we can simplify code that allocates cpumasks for local needs.
Signed-off-by: Yury Norov <yury.norov@gmail.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Similarly to cpumask_weight_and(), cpumask_weight_andnot() is a handy
helper that may help to avoid creating an intermediate mask just to
calculate number of bits that set in a 1st given mask, and clear in 2nd
one.
Signed-off-by: Yury Norov <yury.norov@gmail.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
root directory
It appears that Sony DVMC-DA1 has a quirk that the descriptor leaf entry
locates just after the vendor directory entry in root directory. This is
not conformant to the legacy layout of configuration ROM described in
Configuration ROM for AV/C Devices 1.0 (1394 Trading Association, Dec 2000,
TA Document 1999027).
This commit changes current implementation to parse configuration ROM for
device attributes so that the descriptor leaf entry can be detected for
the vendor name.
$ config-rom-pretty-printer < Sony-DVMC-DA1.img
ROM header and bus information block
-----------------------------------------------------------------
1024 041ee7fb bus_info_length 4, crc_length 30, crc 59387
1028 31333934 bus_name "1394"
1032 e0644000 irmc 1, cmc 1, isc 1, bmc 0, cyc_clk_acc 100, max_rec 4 (32)
1036 08004603 company_id 080046 |
1040 0014193c device_id 12886219068 | EUI-64 576537731003586876
root directory
-----------------------------------------------------------------
1044 0006b681 directory_length 6, crc 46721
1048 03080046 vendor
1052 0c0083c0 node capabilities: per IEEE 1394
1056 8d00000a --> eui-64 leaf at 1096
1060 d1000003 --> unit directory at 1072
1064 c3000005 --> vendor directory at 1084
1068 8100000a --> descriptor leaf at 1108
unit directory at 1072
-----------------------------------------------------------------
1072 0002cdbf directory_length 2, crc 52671
1076 1200a02d specifier id
1080 13010000 version
vendor directory at 1084
-----------------------------------------------------------------
1084 00020cfe directory_length 2, crc 3326
1088 17fa0000 model
1092 81000008 --> descriptor leaf at 1124
eui-64 leaf at 1096
-----------------------------------------------------------------
1096 0002c66e leaf_length 2, crc 50798
1100 08004603 company_id 080046 |
1104 0014193c device_id 12886219068 | EUI-64 576537731003586876
descriptor leaf at 1108
-----------------------------------------------------------------
1108 00039e26 leaf_length 3, crc 40486
1112 00000000 textual descriptor
1116 00000000 minimal ASCII
1120 536f6e79 "Sony"
descriptor leaf at 1124
-----------------------------------------------------------------
1124 0005001d leaf_length 5, crc 29
1128 00000000 textual descriptor
1132 00000000 minimal ASCII
1136 44564d43 "DVMC"
1140 2d444131 "-DA1"
1144 00000000
Suggested-by: Adam Goldman <adamg@pobox.com>
Tested-by: Adam Goldman <adamg@pobox.com>
Link: https://lore.kernel.org/r/20240130100409.30128-3-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
|
|
Against its current description, the kernel API can accepts all types of
directory entries.
This commit corrects the documentation.
Cc: stable@vger.kernel.org
Fixes: 3c2c58cb33b3 ("firewire: core: fw_csr_string addendum")
Link: https://lore.kernel.org/r/20240130100409.30128-2-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
|
|
This commit introduces support for the KSZ8567, a robust 7-port
Ethernet switch. The KSZ8567 features two RGMII/MII/RMII interfaces,
each capable of gigabit speeds, complemented by five 10/100 Mbps
MAC/PHYs.
Signed-off-by: Philippe Schenker <philippe.schenker@impulsing.ch>
Acked-by: Arun Ramadoss <arun.ramadoss@microchip.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://lore.kernel.org/r/20240130083419.135763-2-dev@pschenker.ch
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
This commit adds the dt-binding for KSZ8567, a robust 7-port
Ethernet switch. The KSZ8567 features two RGMII/MII/RMII interfaces,
each capable of gigabit speeds, complemented by five 10/100 Mbps
MAC/PHYs.
This binding is necessary to set specific capabilities for this switch
chip that are necessary due to the ksz dsa driver only accepting
specific chip ids.
The KSZ8567 is very similar to KSZ9567 however only containing 100 Mbps
phys on its downstream ports.
Signed-off-by: Philippe Schenker <philippe.schenker@impulsing.ch>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://lore.kernel.org/r/20240130083419.135763-1-dev@pschenker.ch
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
dtschema package defines firmware-name as string-array, so individual
bindings should not make it a string but instead just narrow the number
of expected firmware file names.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Acked-by: Alex Elder <elder@linaro.org>
Link: https://lore.kernel.org/r/20240129142121.102450-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Donald Hunter says:
====================
tools/net/ynl: Add features for tc family
Add features to ynl for tc and update the tc spec to use them.
Patch 1 adds an option to output json instead of python pretty printing.
Patch 2, 3 adds support and docs for sub-messages in nested attribute
spaces that reference keys from a parent space.
Patches 4 and 7-9 refactor ynl in support of nested struct definitions
Patch 5 implements sub-message encoding for write ops.
Patch 6 adds logic to set default zero values for binary blobs
Patches 10, 11 adds support and docs for nested struct definitions
Patch 12 updates the ynl doc generator to include type information for
struct members.
Patch 13 updates the tc spec - still a work in progress but more complete
====================
Link: https://lore.kernel.org/r/20240129223458.52046-1-donald.hunter@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Fill in many of the gaps in the tc netlink spec, including stats attrs,
classes and actions. Many documentation strings have also been added.
This is still a work in progress, albeit fairly complete:
- there are still many attributes left as binary blobs.
- actions have not had much testing
Signed-off-by: Donald Hunter <donald.hunter@gmail.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Link: https://lore.kernel.org/r/20240129223458.52046-14-donald.hunter@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Extend the ynl doc generator to include type information for struct
members, ignoring the pad type.
Signed-off-by: Donald Hunter <donald.hunter@gmail.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Link: https://lore.kernel.org/r/20240129223458.52046-13-donald.hunter@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add a description and example of nested struct definitions
to the netlink raw documentation.
Signed-off-by: Donald Hunter <donald.hunter@gmail.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Link: https://lore.kernel.org/r/20240129223458.52046-12-donald.hunter@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Make it possible for struct definitions to reference other struct
definitions ofr binary members. For example, the tbf qdisc uses this
struct definition for its parms attribute:
-
name: tc-tbf-qopt
type: struct
members:
-
name: rate
type: binary
struct: tc-ratespec
-
name: peakrate
type: binary
struct: tc-ratespec
-
name: limit
type: u32
-
name: buffer
type: u32
-
name: mtu
type: u32
This adds the necessary schema changes and adds nested struct encoding
and decoding to ynl.
Signed-off-by: Donald Hunter <donald.hunter@gmail.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Link: https://lore.kernel.org/r/20240129223458.52046-11-donald.hunter@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The formatted_string() class method was in NlAttr so that it could be
accessed by NlAttr.as_struct(). Now that as_struct() has been removed,
move formatted_string() to YnlFamily as an internal helper method.
Signed-off-by: Donald Hunter <donald.hunter@gmail.com>
Reviewed-by: Breno Leitao <leitao@debian.org>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Link: https://lore.kernel.org/r/20240129223458.52046-10-donald.hunter@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Refactor the _fixed_header_size() method to be _struct_size() so that
naming is consistent with _encode_struct() and _decode_struct().
Signed-off-by: Donald Hunter <donald.hunter@gmail.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Link: https://lore.kernel.org/r/20240129223458.52046-9-donald.hunter@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
_decode_fixed_header() and NlAttr.as_struct() both implemented struct
decoding logic. Deduplicate the code into newly named _decode_struct()
method.
Signed-off-by: Donald Hunter <donald.hunter@gmail.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Link: https://lore.kernel.org/r/20240129223458.52046-8-donald.hunter@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add support for defaulting binary byte arrays to all zeros as well as
defaulting scalar values to 0 when encoding input parameters.
Signed-off-by: Donald Hunter <donald.hunter@gmail.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Link: https://lore.kernel.org/r/20240129223458.52046-7-donald.hunter@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add sub-message encoding to ynl. This makes it possible to create
tc qdiscs and other polymorphic netlink objects.
Signed-off-by: Donald Hunter <donald.hunter@gmail.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Link: https://lore.kernel.org/r/20240129223458.52046-6-donald.hunter@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Refactor the fixed header encoding into a separate _encode_struct method
so that it can be reused for fixed headers in sub-messages and for
encoding structs.
Signed-off-by: Donald Hunter <donald.hunter@gmail.com>
Reviewed-by: Breno Leitao <leitao@debian.org>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Link: https://lore.kernel.org/r/20240129223458.52046-5-donald.hunter@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Update the netlink-raw docs to add a description of sub-message selector
resolution to explain that selector resolution is constrained by the
spec.
Signed-off-by: Donald Hunter <donald.hunter@gmail.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Link: https://lore.kernel.org/r/20240129223458.52046-4-donald.hunter@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Sub-message selectors could only be resolved using values from the
current nest level. Enable value lookup in outer scopes by using
collections.ChainMap to implement an ordered lookup from nested to
outer scopes.
Signed-off-by: Donald Hunter <donald.hunter@gmail.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Link: https://lore.kernel.org/r/20240129223458.52046-3-donald.hunter@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|