| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/crng/random
Pull random number generator fixes from Jason Donenfeld:
- A fix for a 5.19 regression for a case in which early device tree
initializes the RNG, which flips a static branch.
On most plaforms, jump labels aren't initialized until much later, so
this caused splats. On a few mailing list threads, we cooked up easy
fixes for arm64, arm32, and risc-v. But then things looked slightly
more involved for xtensa, powerpc, arc, and mips. And at that point,
when we're patching 7 architectures in a place before the console is
even available, it seems like the cost/risk just wasn't worth it.
So random.c works around it now by checking the already exported
`static_key_initialized` boolean, as though somebody already ran into
this issue in the past. I'm not super jazzed about that; it'd be
prettier to not have to complicate downstream code. But I suppose
it's practical.
- A few small code nits and adding a missing __init annotation.
- A change to the default config values to use the cpu and bootloader's
seeds for initializing the RNG earlier.
This brings them into line with what all the distros do (Fedora/RHEL,
Debian, Ubuntu, Gentoo, Arch, NixOS, Alpine, SUSE, and Void... at
least), and moreover will now give us test coverage in various test
beds that might have caught the above device tree bug earlier.
- A change to WireGuard CI's configuration to increase test coverage
around the RNG.
- A documentation comment fix to unrelated maintainerless CRC code that
I was asked to take, I guess because it has to do with polynomials
(which the RNG thankfully no longer uses).
* tag 'random-5.19-rc2-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/crng/random:
wireguard: selftests: use maximum cpu features and allow rng seeding
random: remove rng_has_arch_random()
random: credit cpu and bootloader seeds by default
random: do not use jump labels before they are initialized
random: account for arch randomness in bits
random: mark bootloader randomness code as __init
random: avoid checking crng_ready() twice in random_init()
crc-itu-t: fix typo in CRC ITU-T polynomial comment
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux
Pull gpio fixes from Bartosz Golaszewski:
"A set of fixes. Most address the new warning we emit at build time
when irq chips are not immutable with some additional tweaks to
gpio-crystalcove from Andy and a small tweak to gpio-dwapd.
- make irq_chip structs immutable in several Diolan and intel drivers
to get rid of the new warning we emit when fiddling with irq chips
- don't print error messages on probe deferral in gpio-dwapb"
* tag 'gpio-fixes-for-v5.19-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux:
gpio: dwapb: Don't print error on -EPROBE_DEFER
gpio: dln2: make irq_chip immutable
gpio: sch: make irq_chip immutable
gpio: merrifield: make irq_chip immutable
gpio: wcove: make irq_chip immutable
gpio: crystalcove: Join function declarations and long lines
gpio: crystalcove: Use specific type and API for IRQ number
gpio: crystalcove: make irq_chip immutable
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"Driver fixes and and one core patch.
Nine of the driver patches are minor fixes and reworks to lpfc and the
rest are trivial and minor fixes elsewhere"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: pmcraid: Fix missing resource cleanup in error case
scsi: ipr: Fix missing/incorrect resource cleanup in error case
scsi: mpt3sas: Fix out-of-bounds compiler warning
scsi: lpfc: Update lpfc version to 14.2.0.4
scsi: lpfc: Allow reduced polling rate for nvme_admin_async_event cmd completion
scsi: lpfc: Add more logging of cmd and cqe information for aborted NVMe cmds
scsi: lpfc: Fix port stuck in bypassed state after LIP in PT2PT topology
scsi: lpfc: Resolve NULL ptr dereference after an ELS LOGO is aborted
scsi: lpfc: Address NULL pointer dereference after starget_to_rport()
scsi: lpfc: Resolve some cleanup issues following SLI path refactoring
scsi: lpfc: Resolve some cleanup issues following abort path refactoring
scsi: lpfc: Correct BDE type for XMIT_SEQ64_WQE in lpfc_ct_reject_event()
scsi: vmw_pvscsi: Expand vcpuHint to 16 bits
scsi: sd: Fix interpretation of VPD B9h length
|
|
Pull virtio fixes from Michael Tsirkin:
"Fixes all over the place, most notably fixes for latent bugs in
drivers that got exposed by suppressing interrupts before DRIVER_OK,
which in turn has been done by 8b4ec69d7e09 ("virtio: harden vring
IRQ")"
* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost:
um: virt-pci: set device ready in probe()
vdpa: make get_vq_group and set_group_asid optional
virtio: Fix all occurences of the "the the" typo
vduse: Fix NULL pointer dereference on sysfs access
vringh: Fix loop descriptors check in the indirect cases
vdpa/mlx5: clean up indenting in handle_ctrl_vlan()
vdpa/mlx5: fix error code for deleting vlan
virtio-mmio: fix missing put_device() when vm_cmdline_parent registration failed
vdpa/mlx5: Fix syntax errors in comments
virtio-rng: make device ready before making request
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson
Pull LoongArch fixes from Huacai Chen.
"Fix build errors and a stale comment"
* tag 'loongarch-fixes-5.19-1' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson:
LoongArch: Remove MIPS comment about cycle counter
LoongArch: Fix copy_thread() build errors
LoongArch: Fix the !CONFIG_SMP build
|
|
Commit 6c77676645ad ("iov_iter: Fix iter_xarray_get_pages{,_alloc}()")
introduced a problem on some 32-bit architectures (at least arm, xtensa,
csky,sparc and mips), that have a 'size_t' that is 'unsigned int'.
The reason is that we now do
min(nr * PAGE_SIZE - offset, maxsize);
where 'nr' and 'offset' and both 'unsigned int', and PAGE_SIZE is
'unsigned long'. As a result, the normal C type rules means that the
first argument to 'min()' ends up being 'unsigned long'.
In contrast, 'maxsize' is of type 'size_t'.
Now, 'size_t' and 'unsigned long' are always the same physical type in
the kernel, so you'd think this doesn't matter, and from an actual
arithmetic standpoint it doesn't.
But on 32-bit architectures 'size_t' is commonly 'unsigned int', even if
it could also be 'unsigned long'. In that situation, both are unsigned
32-bit types, but they are not the *same* type.
And as a result 'min()' will complain about the distinct types (ignore
the "pointer types" part of the error message: that's an artifact of the
way we have made 'min()' check types for being the same):
lib/iov_iter.c: In function 'iter_xarray_get_pages':
include/linux/minmax.h:20:35: error: comparison of distinct pointer types lacks a cast [-Werror]
20 | (!!(sizeof((typeof(x) *)1 == (typeof(y) *)1)))
| ^~
lib/iov_iter.c:1464:16: note: in expansion of macro 'min'
1464 | return min(nr * PAGE_SIZE - offset, maxsize);
| ^~~
This was not visible on 64-bit architectures (where we always define
'size_t' to be 'unsigned long').
Force these cases to use 'min_t(size_t, x, y)' to make the type explicit
and avoid the issue.
[ Nit-picky note: technically 'size_t' doesn't have to match 'unsigned
long' arithmetically. We've certainly historically seen environments
with 16-bit address spaces and 32-bit 'unsigned long'.
Similarly, even in 64-bit modern environments, 'size_t' could be its
own type distinct from 'unsigned long', even if it were arithmetically
identical.
So the above type commentary is only really descriptive of the kernel
environment, not some kind of universal truth for the kinds of wild
and crazy situations that are allowed by the C standard ]
Reported-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com>
Link: https://lore.kernel.org/all/YqRyL2sIqQNDfky2@debian/
Cc: Jeff Layton <jlayton@kernel.org>
Cc: David Howells <dhowells@redhat.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
By forcing the maximum CPU that QEMU has available, we expose additional
capabilities, such as the RNDR instruction, which increases test
coverage. This then allows the CI to skip the fake seeding step in some
cases. Also enable STRICT_KERNEL_RWX to catch issues related to early
jump labels when the RNG is initialized at boot.
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
|
|
Call virtio_device_ready() to make this driver work after commit
b4ec69d7e09 ("virtio: harden vring IRQ"), since the driver uses the
virtqueues in the probe function. (The virtio core sets the device
ready when probe returns.)
Fixes: 8b4ec69d7e09 ("virtio: harden vring IRQ")
Fixes: 68f5d3f3b654 ("um: add PCI over virtio emulation driver")
Signed-off-by: Vincent Whitchurch <vincent.whitchurch@axis.com>
Message-Id: <20220610151203.3492541-1-vincent.whitchurch@axis.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Tested-by: Johannes Berg <johannes@sipsolutions.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux
Pull nfsd fixes from Chuck Lever:
"Notable changes:
- There is now a backup maintainer for NFSD
Notable fixes:
- Prevent array overruns in svc_rdma_build_writes()
- Prevent buffer overruns when encoding NFSv3 READDIR results
- Fix a potential UAF in nfsd_file_put()"
* tag 'nfsd-5.19-1' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux:
SUNRPC: Remove pointer type casts from xdr_get_next_encode_buffer()
SUNRPC: Clean up xdr_get_next_encode_buffer()
SUNRPC: Clean up xdr_commit_encode()
SUNRPC: Optimize xdr_reserve_space()
SUNRPC: Fix the calculation of xdr->end in xdr_get_next_encode_buffer()
SUNRPC: Trap RDMA segment overflows
NFSD: Fix potential use-after-free in nfsd_file_put()
MAINTAINERS: reciprocal co-maintainership for file locking and nfsd
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm
Pull device mapper fixes from Mike Snitzer:
- Fix DM core's bioset initialization so that blk integrity pool is
properly setup. Remove now unused bioset_init_from_src.
- Fix DM zoned hang from locking imbalance due to needless check in
clone_endio().
* tag 'for-5.19/dm-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm:
dm: fix zoned locking imbalance due to needless check in clone_endio
block: remove bioset_init_from_src
dm: fix bio_set allocation
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs
Pull fscache cleanups from David Howells:
- fix checker complaint in afs
- two netfs cleanups:
- netfs_inode calling convention cleanup plus the requisite
documentation changes
- replace the ->cleanup op with a ->free_request op.
This is possible as the I/O request is now always available at
the cleanup point as the stuff to be cleaned up is no longer
passed into the API functions, but rather obtained by ->init_request.
* 'fscache-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs:
netfs: Rename the netfs_io_request cleanup op and give it an op pointer
netfs: Further cleanups after struct netfs_inode wrapper introduced
afs: Fix some checker issues
|
|
Pull iov_iter fix from Al Viro:
"ITER_XARRAY get_pages fix; now the return value is a lot saner (and
more similar to logics for other flavours)"
* tag 'pull-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
iov_iter: Fix iter_xarray_get_pages{,_alloc}()
|
|
The maths at the end of iter_xarray_get_pages() to calculate the actual
size doesn't work under some circumstances, such as when it's been asked to
extract a partial single page. Various terms of the equation cancel out
and you end up with actual == offset. The same issue exists in
iter_xarray_get_pages_alloc().
Fix these to just use min() to select the lesser amount from between the
amount of page content transcribed into the buffer, minus the offset, and
the size limit specified.
This doesn't appear to have caused a problem yet upstream because network
filesystems aren't getting the pages from an xarray iterator, but rather
passing it directly to the socket, which just iterates over it. Cachefiles
*does* do DIO from one to/from ext4/xfs/btrfs/etc. but it always asks for
whole pages to be written or read.
Fixes: 7ff5062079ef ("iov_iter: Add ITER_XARRAY")
Reported-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Alexander Viro <viro@zeniv.linux.org.uk>
cc: Dominique Martinet <asmadeus@codewreck.org>
cc: Mike Marshall <hubcap@omnibond.com>
cc: Gao Xiang <xiang@kernel.org>
cc: linux-afs@lists.infradead.org
cc: v9fs-developer@lists.sourceforge.net
cc: devel@lists.orangefs.org
cc: linux-erofs@lists.ozlabs.org
cc: linux-cachefs@redhat.com
cc: linux-fsdevel@vger.kernel.org
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
The netfs_io_request cleanup op is now always in a position to be given a
pointer to a netfs_io_request struct, so this can be passed in instead of
the mapping and private data arguments (both of which are included in the
struct).
So rename the ->cleanup op to ->free_request (to match ->init_request) and
pass in the I/O pointer.
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
cc: linux-cachefs@redhat.com
|
|
Change the signature of netfs helper functions to take a struct netfs_inode
pointer rather than a struct inode pointer where appropriate, thereby
relieving the need for the network filesystem to convert its internal inode
format down to the VFS inode only for netfslib to bounce it back up. For
type safety, it's better not to do that (and it's less typing too).
Give netfs_write_begin() an extra argument to pass in a pointer to the
netfs_inode struct rather than deriving it internally from the file
pointer. Note that the ->write_begin() and ->write_end() ops are intended
to be replaced in the future by netfslib code that manages this without the
need to call in twice for each page.
netfs_readpage() and similar are intended to be pointed at directly by the
address_space_operations table, so must stick to the signature dictated by
the function pointers there.
Changes
=======
- Updated the kerneldoc comments and documentation [DH].
Signed-off-by: David Howells <dhowells@redhat.com>
cc: linux-cachefs@redhat.com
Link: https://lore.kernel.org/r/CAHk-=wgkwKyNmNdKpQkqZ6DnmUL-x9hp0YBnUGjaPFEAdxDTbw@mail.gmail.com/
|
|
Remove an unused global variable and make another static as reported by
make C=1.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: linux-afs@lists.infradead.org
|
|
Pull folio fixes from Matthew Wilcox:
"Four folio-related fixes:
- Don't release a folio while it's still locked
- Fix a use-after-free after dropping the mmap_lock
- Fix a memory leak when splitting a page
- Fix a kernel-doc warning for struct folio"
* tag 'folio-5.19a' of git://git.infradead.org/users/willy/pagecache:
mm: Add kernel-doc for folio->mlock_count
mm/huge_memory: Fix xarray node memory leak
filemap: Cache the value of vm_flags
filemap: Don't release a locked folio
|
|
After the commit ca522482e3ea ("dm: pass NULL bdev to bio_alloc_clone"),
clone_endio() only calls dm_zone_endio() when DM targets remap the
clone bio's bdev to something other than the md->disk->part0 default.
However, if a DM target (e.g. dm-crypt) stacked ontop of a dm-zoned
does not remap the clone bio using bio_set_dev() then dm_zone_endio()
is not called at completion of the bios and zone locks are not
properly unlocked. This triggers a hang, in dm_zone_map_bio(), when
blktests block/004 is run for dm-crypt on zoned block devices. To
avoid the hang, simply remove the clone_endio() check that verifies
the target remapped the clone bio to a device other than the default.
Fixes: ca522482e3ea ("dm: pass NULL bdev to bio_alloc_clone")
Reported-by: Shin'ichiro Kawasaki <shinichiro.kawasaki@wdc.com>
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux
Pull more devicetree fixes from Rob Herring:
- More DT meta-schema check fixes from new bindings in merge window
- Fix stale DT binding references from Mauro
- Update various binding maintainers
- Fix in arm,malidp properties to match reality
- Add deprecated 'atheros' vendor prefix
* tag 'devicetree-fixes-for-5.19-2' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux:
dt-bindings: display: arm,malidp: remove bogus RQOS property
dt-bindings: pinctrl: ralink: Fix 'enum' lists with duplicate entries
dt-bindings: Drop more redundant 'maxItems/minItems' in if/then schemas
dt-bindings: nvme: apple,nvme-ans: Drop 'maxItems' from 'apple,sart'
MAINTAINERS: rectify entries for ARM DRM DRIVERS after dt conversion
MAINTAINERS: update snps,axs10x-reset.yaml reference
MAINTAINERS: update dongwoon,dw9807-vcm.yaml reference
MAINTAINERS: update cortina,gemini-ethernet.yaml reference
dt-bindings: mfd: rk808: update rockchip,rk808.yaml reference
dt-bindings: reset: update st,stih407-powerdown.yaml references
dt-bindings: arm: update vexpress-config.yaml references
dt-bindings: interrupt-controller: update brcm,l2-intc.yaml reference
dt-bindings: mfd: bd9571mwv: update rohm,bd9571mwv.yaml reference
dt-bindings: update Luca Ceresoli's e-mail address
dt-bindings: msm: update maintainers list with proper id
dt-bindings: vendor-prefixes: document deprecated Atheros
dt-bindings: Update QCOM USB subsystem maintainer information
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management fixes from Rafael Wysocki:
"These fix an intel_idle issue introduced during the 5.16 development
cycle and two recent regressions in the system reboot/poweroff code.
Specifics:
- Fix CPUIDLE_FLAG_IRQ_ENABLE handling in intel_idle (Peter Zijlstra)
- Allow all platforms to use the global poweroff handler and make
non-syscall poweroff code paths work again (Dmitry Osipenko)"
* tag 'pm-5.19-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
cpuidle,intel_idle: Fix CPUIDLE_FLAG_IRQ_ENABLE
kernel/reboot: Fix powering off using a non-syscall code paths
kernel/reboot: Use static handler for register_platform_power_off()
|
|
There's a rule in certs/Makefile for which the command begins with eight
spaces. This results in:
../certs/Makefile:21: FORCE prerequisite is missing
../certs/Makefile:21: *** missing separator. Stop.
Fix this by turning the spaces into a tab.
Fixes: addf466389d9 ("certs: Check that builtin blacklist hashes are valid")
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Reviewed-by: Mickaël Salaün <mic@linux.microsoft.com>
cc: keyrings@vger.kernel.org
Link: https://lore.kernel.org/r/486b1b80-9932-aab6-138d-434c541c934a@digikod.net/ # v1
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
As Liviu pointed out, the arm,malidp-arqos-high-level property
mentioned in the original .txt binding was a mistake, and
arm,malidp-arqos-value needs to take its place.
The binding commit ce6eb0253cba ("dt/bindings: display: Add optional
property node define for Mali DP500") mentions the right name in the
commit message, but has the wrong name in the diff.
Commit d298e6a27a81 ("drm/arm/mali-dp: Add display QoS interface
configuration for Mali DP500") uses the property in the driver, but uses
the shorter name.
Remove the wrong property from the binding, and use the proper name in
the example. The actual property was already documented properly.
Fixes: 2c8b082a3ab1 ("dt-bindings: display: convert Arm Mali-DP to DT schema")
Link: https://lore.kernel.org/linux-arm-kernel/YnumGEilUblhBx8E@e110455-lin.cambridge.arm.com/
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Reported-by: Liviu Dudau <liviu.dudau@arm.com>
Reviewed-by: Liviu Dudau <liviu.dudau@arm.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220609162729.1441760-1-andre.przywara@arm.com
|
|
Merge fixes for regressions introduced by the recent rework of the
system reboot/poweroff code.
* pm-sysoff:
kernel/reboot: Fix powering off using a non-syscall code paths
kernel/reboot: Use static handler for register_platform_power_off()
|
|
There's no reason to list the same value twice in an 'enum'. This was fixed
treewide in commit c3b006819426 ("dt-bindings: Fix 'enum' lists with
duplicate entries"), but this one got added in the merge window.
A meta-schema change will catch future cases.
Signed-off-by: Rob Herring <robh@kernel.org>
Acked-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Link: https://lore.kernel.org/r/20220606212239.1360877-1-robh@kernel.org
|
|
Pull documentation fixes from Jonathan Corbet:
"A few documentation fixes for 5.19, including moving the new HTE docs
to a more suitable location, adding loongarch to the features lists,
and a couple of typo fixes"
* tag 'docs-5.19-3' of git://git.lwn.net/linux:
docs: arm: tcm: Fix typo in description of TCM and MMU usage
docs: Move the HTE documentation to driver-api/
docs: usb: fix literal block marker in usbmon verification example
Documentation/features: Update the arch support status files
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 fixes from Catalin Marinas:
- SME save/restore for EFI fix - incorrect logic for detecting the need
for saving/restoring the FFR state.
- SME fix for a CPU ID field value.
- Sysreg generation awk script fix (comparison operator).
- Some typos in documentation or comments and silence a sparse warning
(missing prototype).
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
arm64: Add kasan_hw_tags_enable() prototype to silence sparse
arm64/sme: Fix EFI save/restore
arm64/fpsimd: Fix typo in comment
arm64/sysreg: Fix typo in Enum element regex
arm64/sme: Fix SVE/SME typo in ABI documentation
arm64/sme: Fix tests for 0b1111 value ID registers
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/zonefs
Pull zonefs fixes from Damien Le Moal:
- Fix handling of the explicit-open mount option, and in particular the
conditions under which this option can be ignored.
- Fix a problem with zonefs iomap_begin method, causing a hang in
iomap_readahead() when a readahead request reaches the end of a file.
* tag 'zonefs-5.19-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/zonefs:
zonefs: fix zonefs_iomap_begin() for reads
zonefs: Do not ignore explicit_open with active zone limit
zonefs: fix handling of explicit_open option on mount
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/libata
Pull ATA fixes from Damien Le Moal:
"Several small fixes for rc2:
- Remove unused field in struct ata_port (Hannes)
- Fix a potential (very unlikely) NULL pointer dereference in
ata_host_alloc_pinfo() (Sergey)
- Fix a device reference leak in the pata_octeon_cf driver (Miaoqian)
- Fixes for handling access to the concurrent positioning ranges log
page used with multi-actuator HDDs (Tyler)
- Fix the values shown by the pio_mode and dma_mode sysfs device
attributes (Sergey)
- Update the MAINTAINERS file to add libata sysfs ABI documentation
file (Sergey)"
* tag 'ata-5.19-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/libata:
MAINTAINERS: add ATA sysfs file documentation to libata entry
ata: libata-transport: fix {dma|pio|xfer}_mode sysfs files
libata: fix translation of concurrent positioning ranges
libata: fix reading concurrent positioning ranges log
ata: pata_octeon_cf: Fix refcount leak in octeon_cf_probe
ata: libata-core: fix NULL pointer deref in ata_host_alloc_pinfo()
ata: libata: drop 'sas_last_tag'
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"A collection of fixes; almost all changes are device-specific small
fixes over ASoC, HD-audio and USB-audio. No sign of serious breakage,
so far"
* tag 'sound-5.19-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (23 commits)
ALSA: hda/realtek: Add quirk for HP Dev One
ALSA: hda/realtek - Add HW8326 support
ALSA: hda/conexant - Fix loopback issue with CX20632
ALSA: hda: MTL: add HD Audio PCI ID and HDMI codec vendor ID
ALSA: usb-audio: Set up (implicit) sync for Saffire 6
ALSA: usb-audio: Skip generic sync EP parse for secondary EP
ASoC: wm_adsp: Fix event generation for wm_adsp_fw_put()
ASoC: es8328: Fix event generation for deemphasis control
ASoC: wm8962: Fix suspend while playing music
ASoC: SOF: ipc-msg-injector: Fix reversed if statement
ASoC: SOF: ipc-msg-injector: Propagate write errors correctly
ASoC: fsl_sai: Add support for i.MX8MN
ASoC: SOF: Fix potential NULL pointer dereference
ALSA: hda/realtek: Fix for quirk to enable speaker output on the Lenovo Yoga DuetITL 2021
ASoC: cs42l51: Correct minimum value for SX volume control
ASoC: cs42l56: Correct typo in minimum level for SX volume controls
ASoC: cs42l52: Correct TLV for Bypass Volume
ASoC: cs53l30: Correct number of volume levels on SX controls
ASoC: cs35l36: Update digital volume TLV
ASoC: cs42l52: Fix TLV scales for mixer controls
...
|
|
Pull drm fixes from Dave Airlie:
"Not a huge amount here, mainly a bunch of scattered amdgpu fixes, and
then some misc panfrost, bridge/panel ones, and one ast fix for
multi-monitors. Probably pick up a bit more next week like rc3 often
does.
amdgpu:
- DCN 3.1 golden settings fix
- eDP fixes
- DMCUB fixes
- GFX11 fixes and cleanups
- VCN fix for yellow carp
- GMC11 fixes
- RAS fixes
- GPUVM TLB flush fixes
- SMU13 fixes
- VCN3 AV1 regression fix
- VCN2 JPEG fix
- Other misc fixes
amdkfd:
- MMU notifier fix
- Support for more GC 10.3.x families
- Pinned BO handling fix
- Partial migration bug fix
panfrost:
- fix a use after free
ti-sn65dsi83:
- fix invalid DT configuration
panel:
- two self refresh fixes
ast:
- multiple output fix"
* tag 'drm-fixes-2022-06-10' of git://anongit.freedesktop.org/drm/drm: (37 commits)
drm/ast: Support multiple outputs
drm/amdgpu/mes: only invalid/prime icache when finish loading both pipe MES FWs.
drm/amdgpu/jpeg2: Add jpeg vmid update under IB submit
drm/amdgpu: always flush the TLB on gfx8
drm/amdgpu: fix limiting AV1 to the first instance on VCN3
drm/amdkfd:Fix fw version for 10.3.6
drm/amdgpu: Add MODE register to wave debug info in gfx11
Revert "drm/amd/display: Pass the new context into disable OTG WA"
Revert "drm/amdgpu: Ensure the DMA engine is deactivated during set ups"
drm/atomic: Force bridge self-refresh-exit on CRTC switch
drm/bridge: analogix_dp: Support PSR-exit to disable transition
drm/amdgpu: suppress the compile warning about 64 bit type
drm/amd/pm: suppress compile warnings about possible unaligned accesses
drm/amdkfd: Fix partial migration bugs
drm/amdkfd: add pinned BOs to kfd_bo_list
drm/amdgpu: Update PDEs flush TLB if PTB/PDB moved
drm/amdgpu: enable tmz by default for GC 10.3.7
drm/amdkfd: Add GC 10.3.6 and 10.3.7 KFD definitions
drm/amdkfd: Use mmget_not_zero in MMU notifier
drm/amdgpu: Resolve RAS GFX error count issue after cold boot on Arcturus
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Quick follow up, to cleanly fast-forward net again.
Current release - new code bugs:
- Revert "net/mlx5e: Allow relaxed ordering over VFs"
Previous releases - regressions:
- seg6: fix seg6_lookup_any_nexthop() to handle VRFs using
flowi_l3mdev
Misc:
- rename TLS_INFO_ZC_SENDFILE to better express the meaning"
* tag 'net-5.19-rc2-2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net:
net: seg6: fix seg6_lookup_any_nexthop() to handle VRFs using flowi_l3mdev
nfp: flower: restructure flow-key for gre+vlan combination
nfp: avoid unnecessary check warnings in nfp_app_get_vf_config
tls: Rename TLS_INFO_ZC_SENDFILE to TLS_INFO_ZC_TX
net/mlx5: fs, fail conflicting actions
net/mlx5: Rearm the FW tracer after each tracer event
net/mlx5: E-Switch, pair only capable devices
net/mlx5e: CT: Fix cleanup of CT before cleanup of TC ct rules
Revert "net/mlx5e: Allow relaxed ordering over VFs"
MAINTAINERS: adjust MELLANOX ETHERNET INNOVA DRIVERS to TLS support removal
|
|
This function is only called from assembly, no need for a prototype
declaration in a header file. In addition, add #ifdef around the
function since it is only used when CONFIG_KASAN_HW_TAGS.
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Reported-by: kernel test robot <lkp@intel.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip
Pull xen updates from Juergen Gross:
- a small cleanup removing "export" of an __init function
- a small series adding a new infrastructure for platform flags
- a series adding generic virtio support for Xen guests (frontend side)
* tag 'for-linus-5.19a-rc2-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
xen: unexport __init-annotated xen_xlate_map_ballooned_pages()
arm/xen: Assign xen-grant DMA ops for xen-grant DMA devices
xen/grant-dma-ops: Retrieve the ID of backend's domain for DT devices
xen/grant-dma-iommu: Introduce stub IOMMU driver
dt-bindings: Add xen,grant-dma IOMMU description for xen-grant DMA ops
xen/virtio: Enable restricted memory access using Xen grant mappings
xen/grant-dma-ops: Add option to restrict memory access under Xen
xen/grants: support allocating consecutive grants
arm/xen: Introduce xen_setup_dma_ops()
virtio: replace arch_has_restricted_virtio_memory_access()
kernel: add platform_has() infrastructure
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux
Pull MIPS fix from Thomas Bogendoerfer:
"Build fix for Loongson-3"
* tag 'mips-fixes_5.19_1' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux:
MIPS: Loongson-3: fix compile mips cpu_hwmon as module build error.
|
|
The EFI save/restore code is confused. When saving the check for saving
FFR is inverted due to confusion with the streaming mode check, and when
restoring we check if we need to restore FFR by checking the percpu
efi_sm_state without the required wrapper rather than based on the
combination of FA64 support and streaming mode.
Fixes: e0838f6373e5 ("arm64/sme: Save and restore streaming mode over EFI runtime calls")
Reported-by: kernel test robot <lkp@intel.com>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20220602124132.3528951-1-broonie@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
Delete the redundant word 'in'.
Signed-off-by: Xiang wangx <wangxiang@cdjrlc.com>
Link: https://lore.kernel.org/r/20220610070543.59338-1-wangxiang@cdjrlc.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
In the awk script, there was a typo with the comparison operator when
checking if the matched pattern is inside an Enum block.
This prevented the generation of the whole sysreg-defs.h header.
Fixes: 66847e0618d7 ("arm64: Add sysreg header generation scripting")
Signed-off-by: Alejandro Tafalla <atafalla@dnyon.com>
Reviewed-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20220609204220.12112-1-atafalla@dnyon.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
Currently if the APB or Debounce clocks aren't yet ready to be requested
the DW GPIO driver will correctly handle that by deferring the probe
procedure, but the error is still printed to the system log. It needlessly
pollutes the log since there was no real error but a request to postpone
the clock request procedure since the clocks subsystem hasn't been fully
initialized yet. Let's fix that by using the dev_err_probe method to print
the APB/clock request error status. It will correctly handle the deferred
probe situation and print the error if it actually happens.
Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
|
|
With arch randomness being used by every distro and enabled in
defconfigs, the distinction between rng_has_arch_random() and
rng_is_initialized() is now rather small. In fact, the places where they
differ are now places where paranoid users and system builders really
don't want arch randomness to be used, in which case we should respect
that choice, or places where arch randomness is known to be broken, in
which case that choice is all the more important. So this commit just
removes the function and its one user.
Reviewed-by: Petr Mladek <pmladek@suse.com> # for vsprintf.c
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
|
|
This commit changes the default Kconfig values of RANDOM_TRUST_CPU and
RANDOM_TRUST_BOOTLOADER to be Y by default. It does not change any
existing configs or change any kernel behavior. The reason for this is
several fold.
As background, I recently had an email thread with the kernel
maintainers of Fedora/RHEL, Debian, Ubuntu, Gentoo, Arch, NixOS, Alpine,
SUSE, and Void as recipients. I noted that some distros trust RDRAND,
some trust EFI, and some trust both, and I asked why or why not. There
wasn't really much of a "debate" but rather an interesting discussion of
what the historical reasons have been for this, and it came up that some
distros just missed the introduction of the bootloader Kconfig knob,
while another didn't want to enable it until there was a boot time
switch to turn it off for more concerned users (which has since been
added). The result of the rather uneventful discussion is that every
major Linux distro enables these two options by default.
While I didn't have really too strong of an opinion going into this
thread -- and I mostly wanted to learn what the distros' thinking was
one way or another -- ultimately I think their choice was a decent
enough one for a default option (which can be disabled at boot time).
I'll try to summarize the pros and cons:
Pros:
- The RNG machinery gets initialized super quickly, and there's no
messing around with subsequent blocking behavior.
- The bootloader mechanism is used by kexec in order for the prior
kernel to initialize the RNG of the next kernel, which increases
the entropy available to early boot daemons of the next kernel.
- Previous objections related to backdoors centered around
Dual_EC_DRBG-like kleptographic systems, in which observing some
amount of the output stream enables an adversary holding the right key
to determine the entire output stream.
This used to be a partially justified concern, because RDRAND output
was mixed into the output stream in varying ways, some of which may
have lacked pre-image resistance (e.g. XOR or an LFSR).
But this is no longer the case. Now, all usage of RDRAND and
bootloader seeds go through a cryptographic hash function. This means
that the CPU would have to compute a hash pre-image, which is not
considered to be feasible (otherwise the hash function would be
terribly broken).
- More generally, if the CPU is backdoored, the RNG is probably not the
realistic vector of choice for an attacker.
- These CPU or bootloader seeds are far from being the only source of
entropy. Rather, there is generally a pretty huge amount of entropy,
not all of which is credited, especially on CPUs that support
instructions like RDRAND. In other words, assuming RDRAND outputs all
zeros, an attacker would *still* have to accurately model every single
other entropy source also in use.
- The RNG now reseeds itself quite rapidly during boot, starting at 2
seconds, then 4, then 8, then 16, and so forth, so that other sources
of entropy get used without much delay.
- Paranoid users can set random.trust_{cpu,bootloader}=no in the kernel
command line, and paranoid system builders can set the Kconfig options
to N, so there's no reduction or restriction of optionality.
- It's a practical default.
- All the distros have it set this way. Microsoft and Apple trust it
too. Bandwagon.
Cons:
- RDRAND *could* still be backdoored with something like a fixed key or
limited space serial number seed or another indexable scheme like
that. (However, it's hard to imagine threat models where the CPU is
backdoored like this, yet people are still okay making *any*
computations with it or connecting it to networks, etc.)
- RDRAND *could* be defective, rather than backdoored, and produce
garbage that is in one way or another insufficient for crypto.
- Suggesting a *reduction* in paranoia, as this commit effectively does,
may cause some to question my personal integrity as a "security
person".
- Bootloader seeds and RDRAND are generally very difficult if not all
together impossible to audit.
Keep in mind that this doesn't actually change any behavior. This
is just a change in the default Kconfig value. The distros already are
shipping kernels that set things this way.
Ard made an additional argument in [1]:
We're at the mercy of firmware and micro-architecture anyway, given
that we are also relying on it to ensure that every instruction in
the kernel's executable image has been faithfully copied to memory,
and that the CPU implements those instructions as documented. So I
don't think firmware or ISA bugs related to RNGs deserve special
treatment - if they are broken, we should quirk around them like we
usually do. So enabling these by default is a step in the right
direction IMHO.
In [2], Phil pointed out that having this disabled masked a bug that CI
otherwise would have caught:
A clean 5.15.45 boots cleanly, whereas a downstream kernel shows the
static key warning (but it does go on to boot). The significant
difference is that our defconfigs set CONFIG_RANDOM_TRUST_BOOTLOADER=y
defining that on top of multi_v7_defconfig demonstrates the issue on
a clean 5.15.45. Conversely, not setting that option in a
downstream kernel build avoids the warning
[1] https://lore.kernel.org/lkml/CAMj1kXGi+ieviFjXv9zQBSaGyyzeGW_VpMpTLJK8PJb2QHEQ-w@mail.gmail.com/
[2] https://lore.kernel.org/lkml/c47c42e3-1d56-5859-a6ad-976a1a3381c6@raspberrypi.com/
Cc: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
|
|
Stephen reported that a static key warning splat appears during early
boot on systems that credit randomness from device trees that contain an
"rng-seed" property, because because setup_machine_fdt() is called
before jump_label_init() during setup_arch():
static_key_enable_cpuslocked(): static key '0xffffffe51c6fcfc0' used before call to jump_label_init()
WARNING: CPU: 0 PID: 0 at kernel/jump_label.c:166 static_key_enable_cpuslocked+0xb0/0xb8
Modules linked in:
CPU: 0 PID: 0 Comm: swapper Not tainted 5.18.0+ #224 44b43e377bfc84bc99bb5ab885ff694984ee09ff
pstate: 600001c9 (nZCv dAIF -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
pc : static_key_enable_cpuslocked+0xb0/0xb8
lr : static_key_enable_cpuslocked+0xb0/0xb8
sp : ffffffe51c393cf0
x29: ffffffe51c393cf0 x28: 000000008185054c x27: 00000000f1042f10
x26: 0000000000000000 x25: 00000000f10302b2 x24: 0000002513200000
x23: 0000002513200000 x22: ffffffe51c1c9000 x21: fffffffdfdc00000
x20: ffffffe51c2f0831 x19: ffffffe51c6fcfc0 x18: 00000000ffff1020
x17: 00000000e1e2ac90 x16: 00000000000000e0 x15: ffffffe51b710708
x14: 0000000000000066 x13: 0000000000000018 x12: 0000000000000000
x11: 0000000000000000 x10: 00000000ffffffff x9 : 0000000000000000
x8 : 0000000000000000 x7 : 61632065726f6665 x6 : 6220646573752027
x5 : ffffffe51c641d25 x4 : ffffffe51c13142c x3 : ffff0a00ffffff05
x2 : 40000000ffffe003 x1 : 00000000000001c0 x0 : 0000000000000065
Call trace:
static_key_enable_cpuslocked+0xb0/0xb8
static_key_enable+0x2c/0x40
crng_set_ready+0x24/0x30
execute_in_process_context+0x80/0x90
_credit_init_bits+0x100/0x154
add_bootloader_randomness+0x64/0x78
early_init_dt_scan_chosen+0x140/0x184
early_init_dt_scan_nodes+0x28/0x4c
early_init_dt_scan+0x40/0x44
setup_machine_fdt+0x7c/0x120
setup_arch+0x74/0x1d8
start_kernel+0x84/0x44c
__primary_switched+0xc0/0xc8
---[ end trace 0000000000000000 ]---
random: crng init done
Machine model: Google Lazor (rev1 - 2) with LTE
A trivial fix went in to address this on arm64, 73e2d827a501 ("arm64:
Initialize jump labels before setup_machine_fdt()"). I wrote patches as
well for arm32 and risc-v. But still patches are needed on xtensa,
powerpc, arc, and mips. So that's 7 platforms where things aren't quite
right. This sort of points to larger issues that might need a larger
solution.
Instead, this commit just defers setting the static branch until later
in the boot process. random_init() is called after jump_label_init() has
been called, and so is always a safe place from which to adjust the
static branch.
Fixes: f5bda35fba61 ("random: use static branch for crng_ready()")
Reported-by: Stephen Boyd <swboyd@chromium.org>
Reported-by: Phil Elwell <phil@raspberrypi.com>
Tested-by: Phil Elwell <phil@raspberrypi.com>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
|
|
Rather than accounting in bytes and multiplying (shifting), we can just
account in bits and avoid the shift. The main motivation for this is
there are other patches in flux that expand this code a bit, and
avoiding the duplication of "* 8" everywhere makes things a bit clearer.
Cc: stable@vger.kernel.org
Fixes: 12e45a2a6308 ("random: credit architectural init the exact amount")
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
|
|
add_bootloader_randomness() and the variables it touches are only used
during __init and not after, so mark these as __init. At the same time,
unexport this, since it's only called by other __init code that's
built-in.
Cc: stable@vger.kernel.org
Fixes: 428826f5358c ("fdt: add support for rng-seed")
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
|
|
The current flow expands to:
if (crng_ready())
...
else if (...)
if (!crng_ready())
...
The second crng_ready() call is redundant, but can't so easily be
optimized out by the compiler.
This commit simplifies that to:
if (crng_ready()
...
else if (...)
...
Fixes: 560181c27b58 ("random: move initialization functions out of hot pages")
Cc: stable@vger.kernel.org
Cc: Dominik Brodowski <linux@dominikbrodowski.net>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux
Saeed Mahameed says:
====================
mlx5 fixes 2022-06-08
This series provides bug fixes to mlx5 driver.
* tag 'mlx5-fixes-2022-06-08' of git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux:
net/mlx5: fs, fail conflicting actions
net/mlx5: Rearm the FW tracer after each tracer event
net/mlx5: E-Switch, pair only capable devices
net/mlx5e: CT: Fix cleanup of CT before cleanup of TC ct rules
Revert "net/mlx5e: Allow relaxed ordering over VFs"
MAINTAINERS: adjust MELLANOX ETHERNET INNOVA DRIVERS to TLS support removal
====================
Link: https://lore.kernel.org/r/20220608185855.19818-1-saeed@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Commit 40867d74c374 ("net: Add l3mdev index to flow struct and avoid oif
reset for port devices") adds a new entry (flowi_l3mdev) in the common
flow struct used for indicating the l3mdev index for later rule and
table matching.
The l3mdev_update_flow() has been adapted to properly set the
flowi_l3mdev based on the flowi_oif/flowi_iif. In fact, when a valid
flowi_iif is supplied to the l3mdev_update_flow(), this function can
update the flowi_l3mdev entry only if it has not yet been set (i.e., the
flowi_l3mdev entry is equal to 0).
The SRv6 End.DT6 behavior in VRF mode leverages a VRF device in order to
force the routing lookup into the associated routing table. This routing
operation is performed by seg6_lookup_any_nextop() preparing a flowi6
data structure used by ip6_route_input_lookup() which, in turn,
(indirectly) invokes l3mdev_update_flow().
However, seg6_lookup_any_nexthop() does not initialize the new
flowi_l3mdev entry which is filled with random garbage data. This
prevents l3mdev_update_flow() from properly updating the flowi_l3mdev
with the VRF index, and thus SRv6 End.DT6 (VRF mode)/DT46 behaviors are
broken.
This patch correctly initializes the flowi6 instance allocated and used
by seg6_lookup_any_nexhtop(). Specifically, the entire flowi6 instance
is wiped out: in case new entries are added to flowi/flowi6 (as happened
with the flowi_l3mdev entry), we should no longer have incorrectly
initialized values. As a result of this operation, the value of
flowi_l3mdev is also set to 0.
The proposed fix can be tested easily. Starting from the commit
referenced in the Fixes, selftests [1],[2] indicate that the SRv6
End.DT6 (VRF mode)/DT46 behaviors no longer work correctly. By applying
this patch, those behaviors are back to work properly again.
[1] - tools/testing/selftests/net/srv6_end_dt46_l3vpn_test.sh
[2] - tools/testing/selftests/net/srv6_end_dt6_l3vpn_test.sh
Fixes: 40867d74c374 ("net: Add l3mdev index to flow struct and avoid oif reset for port devices")
Reported-by: Anton Makarov <am@3a-alliance.com>
Signed-off-by: Andrea Mayer <andrea.mayer@uniroma2.it>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://lore.kernel.org/r/20220608091917.20345-1-andrea.mayer@uniroma2.it
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Simon Horman says:
====================
nfp: fixes for v5.19
this short series includes two fixes for the NFP driver.
1. Restructure GRE+VLAN flower offload to address a miss match
between the NIC firmware and driver implementation which
prevented these features from working in combination.
2. Prevent unnecessary warnings regarding rate limiting support.-
It is expected that this feature to not _always_ be present
but this was not taken into account when the code to check
for this feature was added.
====================
Link: https://lore.kernel.org/r/20220608092901.124780-1-simon.horman@corigine.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Swap around the GRE and VLAN parts in the flow-key offloaded by
the driver to fit in with other tunnel types and the firmware.
Without this change used cases with GRE+VLAN on the outer header
does not get offloaded as the flow-key mismatches what the
firmware expect.
Fixes: 0d630f58989a ("nfp: flower: add support to offload QinQ match")
Fixes: 5a2b93041646 ("nfp: flower-ct: compile match sections of flow_payload")
Signed-off-by: Etienne van der Linde <etienne.vanderlinde@corigine.com>
Signed-off-by: Louis Peens <louis.peens@corigine.com>
Signed-off-by: Yinjun Zhang <yinjun.zhang@corigine.com>
Signed-off-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
nfp_net_sriov_check is added in nfp_app_get_vf_config which intends
to ensure ivi->vlan_proto and ivi->max_tx_rate/min_tx_rate can be
read from VF config table only when firmware supports corresponding
capability.
However, "nfp_app_get_vf_config" can be called by commands like
"ip a", "ip link set $DEV up" and "ip link set $DEV vf $NUM vlan
$param" (with VF). When using commands above, many warnings
"ndo_set_vf_<cap_x> not supported" would appear if firmware doesn't
support VF rate limit and 802.1ad VLAN assingment. If more VFs are
created, things could get worse.
Thus, this patch add an extra bool parameter for nfp_net_sriov_check
to enable/disable the cap check warning report. Unnecessary warnings
in nfp_app_get_vf_config can be avoided. Valid warnings in kinds of
vf setting function can be reserved.
Fixes: e0d0e1fdf1ed ("nfp: VF rate limit support")
Fixes: 59359597b010 ("nfp: support 802.1ad VLAN assingment to VF")
Signed-off-by: Fei Qin <fei.qin@corigine.com>
Signed-off-by: Yinjun Zhang <yinjun.zhang@corigine.com>
Signed-off-by: Louis Peens <louis.peens@corigine.com>
Signed-off-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
To embrace possible future optimizations of TLS, rename zerocopy
sendfile definitions to more generic ones:
* setsockopt: TLS_TX_ZEROCOPY_SENDFILE- > TLS_TX_ZEROCOPY_RO
* sock_diag: TLS_INFO_ZC_SENDFILE -> TLS_INFO_ZC_RO_TX
RO stands for readonly and emphasizes that the application shouldn't
modify the data being transmitted with zerocopy to avoid potential
disconnection.
Fixes: c1318b39c7d3 ("tls: Add opt-in zerocopy mode of sendfile()")
Signed-off-by: Maxim Mikityanskiy <maximmi@nvidia.com>
Link: https://lore.kernel.org/r/20220608153425.3151146-1-maximmi@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
