summaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2012-03-06mfd: Decouple/recouple gic from the ux500 PRCMUDaniel Lezcano3-0/+50
This patch allows to decouple and recouple the gic from the PRCMU. This is needed to put the A9 core in retention mode with the cpuidle driver. It is based on top of the "DB8500 PRCMU update" patchset. Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Acked-by: Rickard Andersson <rickard.andersson@stericsson.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-03-06mfd: Initialize tps65912 irq platform data properlyAxel Lin1-1/+1
irq_base of the tps65912 irq platform data should be initialized with the board provided irq_base data. Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-03-06mfd: Fix ACPI conflict checkJean Delvare1-1/+1
The code is currently always checking the first resource of every device only (several times.) This has been broken since the ACPI check was added in February 2010 in commit 91fedede0338eb6203cdd618d8ece873fdb7c22c. Fix the check to run on each resource individually, once. Signed-off-by: Jean Delvare <khali@linux-fr.org> Cc: stable@vger.kernel.org Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-03-06mfd: wm8994: Add __devinit and __devexit annotations for probe and removeMark Brown1-4/+4
Fixes warnings and needed for correctness. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-03-06mfd: Show correct device id for wm8400Axel Lin1-2/+1
Signed-off-by: Axel Lin <axel.lin@gmail.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-03-06mfd: Move omap-usb-host usbhs init before allocing child devGovindraj.R1-2/+1
There could be possible race condition where the host dev's are alloced and added to platform dev just before usbhs_init. Just move usbhs_init before adding child dev. CC: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Govindraj.R <govindraj.raja@ti.com> Acked-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-03-06mfd: Remove omap-usb-host magic numbers for dev dma maskGovindraj.R1-2/+2
Remove the hardcoded magic values for dma mask and use the dma mask api/macro available. Signed-off-by: Govindraj.R <govindraj.raja@ti.com> Reviewed-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-03-06mfd: Fix typo for TPS65912Axel Lin1-1/+1
Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-03-06mfd: Make pcf50633_write_block() return 0 on successAxel Lin1-7/+1
The callers of pcf50633_write_block assume pcf50633_write_block return 0 on success, thus make it return 0 instead of the number of registers written on success. Currently pcf50633_write_block is called in drivers/mfd/pcf50633-irq.c and drivers/rtc/rtc-pcf50633.c. Signed-off-by: Axel Lin <axel.lin@gmail.com> Acked-by: Harald Welte <laforge@gnumonks.org> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-03-06mfd: Fix val_len parameters for s5m-core regmap_raw_writeAxel Lin1-1/+1
The val_len parameters for regmap_raw_write should be "count * sizeof(u8)" (or simply "count") instead of "count * sizeof(u16)". Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-03-06mfd: Fix kcalloc parameters swappedAxel Lin1-1/+1
The first parameter should be "number of elements" and the second parameter should be "element size". Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-03-06mfd: Support AB9540 ab8500 variantLinus Walleij6-25/+331
The AB9540 variant of the AB8500 is basically close enough to use the same driver. This adds the new registers and deviations for this new chip variant. Reviewed-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Maxime Coquelin <maxime.coquelin@stericsson.com> Signed-off-by: Alex Macro <alex.macro@stericsson.com> Signed-off-by: Michel Jaouen <michel.jaouen@stericsson.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-03-06mfd: Parametrize ab8500 IRQ masks and registersLinus Walleij2-15/+44
This makes the AB8500 state struct contain the IRQ mask and register offsets previously hard-coded so as to make room for more AB8500 variants. Reviewed-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Maxime Coquelin <maxime.coquelin@stericsson.com> Signed-off-by: Alex Macro <alex.macro@stericsson.com> Signed-off-by: Michel Jaouen <michel.jaouen@stericsson.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-03-06mfd: Add ab8500 version detection and enforcingLinus Walleij4-31/+113
There are currently four different versions of the AB8500 around: AB8500, AB8505, AB9540 and AB8540. Unfortunately: - Some of the chips (AB8500, AB8505, AB9540) cannot read the AB8500_REV_REG register but return errors - Some of them have the same ID value in the hardware register AB8500_REV_REV, for example the first versions of AB8505 and AB9540 have 0xFF in this register - just like the AB8500. So we need to be able to enforce a certain version from the platform. We do this by using the id of the platform device that provides the read/write functions. Reviewed-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Maxime Coquelin <maxime.coquelin@stericsson.com> Signed-off-by: Alex Macro <alex.macro@stericsson.com> Signed-off-by: Michel Jaouen <michel.jaouen@stericsson.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-03-06mfd: Fix ab8500 error path bugLinus Walleij1-2/+3
We were not freeing the irq properly in the error path in the AB8500 driver. Cc: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Maxime Coquelin <maxime.coquelin@stericsson.com> Signed-off-by: Alex Macro <alex.macro@stericsson.com> Signed-off-by: Michel Jaouen <michel.jaouen@stericsson.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-03-06mfd: Test for jack detection when deciding if wm8994 should suspendMark Brown1-0/+14
The jack detection on WM1811 is often required during system suspend, add it as another check when deciding if we should suspend. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: stable@vger.kernel.org Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-03-06mfd: wm8994: We don't need to runtime resume by defaultMark Brown1-1/+1
This is the default state that the runtime PM infrastructure expects so instead just kick the runtime PM core to suspend us if we're not doing anything (as is default). Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-03-06mfd: wm8994: Mark MICBIAS register as readableMark Brown1-0/+1
Omitted in the regmap conversion. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-03-06mfd: Trivial twl4030 code-style fixesFelipe Contreras1-12/+14
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-03-06mfd: Add to_irq() member to asic3 gpio_chip structurePaul Parsons1-0/+6
The gpio_to_irq() macro is now defined as __gpio_to_irq() instead of IRQ_GPIO(). The __gpio_to_irq() function returns -ENXIO if the referenced gpio_chip structure does not define a to_irq() member. This is true of the asic3 gpio_chip structure, and thus calls to gpio_to_irq() now fail (for example from the gpio-vbus module). This patch defines the to_irq() member in the asic3 gpio_chip structure. Signed-off-by: Paul Parsons <lost.distance@yahoo.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-03-06mfd: Remove unneeded version.h include from ab5500Jesper Juhl1-1/+0
As 'make versioncheck' points out, there's no need for drivers/mfd/ab5500-core.c to #include <linux/version.h>, so this patch removes the unneeded include. Signed-off-by: Jesper Juhl <jj@chaosbits.net> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-03-06gpio: Support no-irq stmpe modeChris Blair1-16/+25
Adds support for boards which have an STMPE GPIO device without the interrupt pin connected. This means that no interrupt can be received but the GPIO pins can still be driven and read. Cc: Grant Likely <grant.likely@secretlab.ca> Acked-by: Viresh Kumar <viresh.kumar@st.com> Tested-by: Michel Jaouen <michel.jaouen@stericsson.com> Signed-off-by: Chris Blair <chris.blair@stericsson.com> Acked-by: Viresh Kumar <viresh.kumar@st.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-03-06mfd: Add support for no-interrupt stmpe configChris Blair2-38/+97
Adds support for boards which have an STMPE device without the interrupt pin connected. Acked-by: Viresh Kumar <viresh.kumar@st.com> Signed-off-by: Chris Blair <chris.blair@stericsson.com> Tested-by: Michel Jaouen <michel.jaouen@stericsson.com> Reviewed-by: Srinidhi Kasagar <srinidhi.kasagar@stericsson.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Viresh Kumar <viresh.kumar@st.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-03-06mfd: Add itps65910 wakeup supportLaxman Dewangan1-0/+11
Implementing irq_set_wake() so that device should able to wakeup the system through different interrupt provided by this device like gpios, onkey, rtc etc. Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Reviewed-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-03-06mfd: Add support for multiple s5m devicesSangbeom Kim1-4/+38
There are many samsung mfd devices. The s5m core driver try to support various samsung s5m series. It will cover S5M8767A and S5M8763 and S5M8751. This patch is enable to support various s5m series. Signed-off-by: Sangbeom Kim <sbkim73@samsung.com> Reviewed-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-03-06mfd: Convert s5m core driver to use devm_kzalloc()Sangbeom Kim1-3/+2
Convert s5m core driver to use devm_kzalloc(). Signed-off-by: Sangbeom Kim <sbkim73@samsung.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-03-06mfd: Initialize tps65910 irq platform data properlyLaxman Dewangan1-1/+1
irq_base of the tps65910 irq platform data should be initialized with the board provided irq_base data. Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-03-06mfd: Fix s5m error handling for invalid device typeJonghwan Choi1-3/+11
If device type is not supported in driver, have to retun error. Signed-off-by: Jonghwan Choi <jhbird.choi@samsung.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-03-06mfd: Fix possible s5m null pointer dereferenceJonghwan Choi1-1/+1
This patch checks for pdata to using it. Signed-off-by: Jonghwan Choi <jhbird.choi@samsung.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-03-06mfd: wm8350 variable dereferenced before checkJonghwan Choi1-1/+0
Remove "wm8350->irq_base = pdata->irq_base" to avoid null pointer exception and wm8350->irq_base got from irq_alloc_descs(). Signed-off-by: Jonghwan Choi <jhbird.choi@samsung.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-03-06mfd: Add initial db8500 prcmu register access apiMattias Nilsson3-31/+171
This patch adds an initial PRCMU register access API, which for now should only be used for a very limited set of registers. The idea about this API is that we split the PRCMU driver in one part that deals with interaction with the PRCMU firmware and one part that simply provide write accessors in the PRCMU register range. The latter are just a collection of registers exposed in the PRCMU register range for various purposes and not related to the PRCMU firmware. Currently we support some limited GPIO, SPI and UART settings through this API. Signed-off-by: Mattias Nilsson <mattias.i.nilsson@stericsson.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-03-06mfd: Remove check for db8500 firmware bugJonas Aaberg1-8/+0
In prcmu firmware version 3.4.4 the issue with longer intervalls than 131 s was fixed, we don't expect the issue to creep back up. Signed-off-by: Jonas Aaberg <jonas.aberg@stericsson.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-03-06mfd: db8500 OPP and sleep handling updateMattias Nilsson3-3/+110
This updates the operating point handling code by: - Supporting the DDR OPP retention state. - Supporting another low operating point named APE_50_PARTLY_25_OPP - Adding an interface to figure out if the sleep state change was properly achieved. Signed-off-by: Shreshtha Kumar Sahu <shreshthakumar.sahu@stericsson.com> Signed-off-by: Rabin Vincent <rabin.vincent@stericsson.com> Signed-off-by: Mattias Nilsson <mattias.i.nilsson@stericsson.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-03-06mfd: Spawned db8500 regulators updateBengt Jonsson1-10/+15
As drivers have progressed and got some more review we have consequently moved things around: - Some device drivers have changed name and some were wrong from the beginning. - We removed the dependency from some domains to the VAPE domain - SIA MMDSP, SIA PIPE, SVA MMDSP and SVA PIPE power domains are handled outside the framework while ESRAM12 and ESRAM34 are actually handled inside the PRCMU. Reviewed-by: Rickard Andersson <rickard.andersson@stericsson.com> Reviewed-by: Jonas Aberg <jonas.aberg@stericsson.com> Signed-off-by: Bengt Jonsson <bengt.g.jonsson@stericsson.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-03-06mfd: db8500 clock handling updateMattias Nilsson3-121/+720
This updates the clock handling in the DB8500 PRCMU driver with the latest findings and API changes related to changes in the backing firmware in the PRCMU. - Add the necessary interfaces to get the frequencies of the clocks and set the rate of some of the clocks. - Add support for controlling the clocks PLLSOC0, PLLDSI, DSI0, DSI1 and DSI escape clocks (DSInESCCLK). - Correct the PLLSDI enable/disable sequence by using the DSIPLL_CLAMPI bit. After this we will have the interfaces and code to implement the U8500 clock framework properly. Reviewed-by: Jonas Aberg <jonas.aberg@stericsson.com> Signed-off-by: Mattias Nilsson <mattias.i.nilsson@stericsson.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-03-06mfd: Update abstract dbx500 interfaceMattias Nilsson3-74/+204
This prefixes a number of accessor functions with db8500_* since they are DB8500-specific and we need to move to this naming scheme. We also replace numerous instances of machine_is() with cpu_is() which covers the right type of ASICs rather than entire machines i.e. boards. Signed-off-by: Mattias Nilsson <mattias.i.nilsson@stericsson.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-03-06mfd: Function for obtaining the db8500 prcmu firmware versionMattias Nilsson2-18/+51
This patch exports a function that can be used to tell which version of the DB8500 PRCMU firmware is available, and revamps the firmware detection code a bit. Reviewed-by: Bengt Jonsson <bengt.g.jonsson@stericsson.com> Reviewed-by: Jonas Aberg <jonas.aberg@stericsson.com> Signed-off-by: Mattias Nilsson <mattias.i.nilsson@stericsson.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-03-06mfd: Remove db8500-prcmu U8400 legacyDaniel Willerud3-38/+7
This removes the U8400 legacy from PRCMU and cpufreq drivers. This platform has no current in-kernel users. Signed-off-by: Daniel Willerud <daniel.willerud@stericsson.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-03-06mfd: Fix section mismatch warning for da9052-spiAxel Lin1-2/+2
Add __devinit annotation for da9052_spi_probe to fix below build warning: WARNING: drivers/built-in.o(.text+0x349b4): Section mismatch in reference from the function da9052_spi_probe() to the function .devinit.text:da9052_device_init() The function da9052_spi_probe() references the function __devinit da9052_device_init(). This is often because da9052_spi_probe lacks a __devinit annotation or the annotation of da9052_device_init is wrong. Also add __devexit annotation for da9052_spi_remove because we have __devexit_p around it in the remove callback. Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-03-06mfd: Add pdata to set mc13783-ts conversion delayMichael Thalmeier4-5/+35
MC13783 can be programmed to wait some clock cycles between the touchscreen polarization and the resistance conversion. This is needed to adjust for touchscreens with high capacitance between plates. Signed-off-by: Michael Thalmeier <michael.thalmeier@hale.at> Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Acked-by: Dmitry Torokhov <dtor@mail.ru> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-03-06mfd: Add missing regmap_exit to free a previously allocated da9052 register mapAxel Lin2-3/+9
Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-03-06mfd: Add new mfd device for TPS65217AnilKumar Ch4-0/+541
The TPS65217 chip is a power management IC for Portable Navigation Systems and Tablet Computing devices. It contains the following components: - Regulators - White LED - USB battery charger This patch adds support for tps65217 mfd device. At this time only the regulator functionality is made available. Signed-off-by: AnilKumar Ch <anilkumar@ti.com> Reviwed-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-03-06mfd: twl-core: Don't specify regulator consumers by struct deviceMark Brown1-4/+4
This has been deprecated for considerable time now and support has been removed from the regulator API. dev_name should be used instead. Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-02-19Linux 3.3-rc4v3.3-rc4Linus Torvalds1-1/+1
2012-02-19Merge tag 'fixes-3.3-rc4' of ↵Linus Torvalds66-786/+524
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc These are the bug fixes that have accumulated since 3.3-rc3 in arm-soc. The majority of them are regression fixes for stuff that broke during the merge 3.3 window. The notable ones are: * The at91 ata drivers both broke because of an earlier cleanup patch that some other patches were based on. Jean-Christophe decided to remove the legacy at91_ide driver and fix the new-style at91-pata driver while keeping the cleanup patch. I almost rejected the patches for being too late and too big but in the end decided to accept them because they fix a regression. * A patch fixing build breakage from the sysdev-to-device conversion colliding with other changes touches a number of mach-s3c files. * b0654037 "ARM: orion: Fix Orion5x GPIO regression from MPP cleanup" is a mechanical change that unfortunately touches a lot of lines that should up in the diffstat. * tag 'fixes-3.3-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (28 commits) ARM: at91: drop ide driver in favor of the pata one pata/at91: use newly introduced SMC accessors ARM: at91: add accessor to manage SMC ARM: at91:rtc/rtc-at91sam9: ioremap register bank ARM: at91: USB AT91 gadget registration for module ep93xx: fix build of vision_ep93xx.c ARM: OMAP2xxx: PM: fix OMAP2xxx-specific UART idle bug in v3.3 ARM: orion: Fix USB phy for orion5x. ARM: orion: Fix Orion5x GPIO regression from MPP cleanup ARM: EXYNOS: Add cpu-offset property in gic device tree node ARM: EXYNOS: Bring exynos4-dt up to date ARM: OMAP3: cm-t35: fix section mismatch warning ARM: OMAP2: Fix the OMAP2 only build break seen with 2011+ ARM tool-chains ARM: tegra: paz00: fix wrong UART port on mini-pcie plug ARM: tegra: paz00: fix wrong SD1 power gpio i2c: tegra: Add devexit_p() for remove ARM: EXYNOS: Correct M-5MOLS sensor clock frequency on Universal C210 board ARM: EXYNOS: Correct framebuffer window size on Nuri board ARM: SAMSUNG: Fix missing api-change from subsys_interface change ARM: EXYNOS: Fix "warning: initialization from incompatible pointer type" ...
2012-02-19Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds27-191/+212
1) VETH_INFO_PEER netlink attribute needs to have it's size validated, from Thomas Graf. 2) 'poll' module option of bnx2x driver crashes the machine, just remove it. From Michal Schmidt. 3) ks8851_mll driver reads the irq number from two places, but only initializes one of them, oops. Use only one location and fix this problem, from Jan Weitzel. 4) Fix buffer overrun and unicast sterring bugs in mellanox mlx4 driver, from Eugenia Emantayev. 5) Swapped kcalloc() args in RxRPC and mlx4, from Axel Lin. 6) PHY MDIO device name regression fixes from Florian Fainelli. 7) If the wake event IRQ line is different from the netdevice one, we have to properly route it to the stmmac interrupt handler. From Francesco Virlinzi. 8) Fix rwlock lock initialization ordering bug in mac80211, from Mohammed Shafi Shajakhan. 9) TCP lost_cnt can get out of sync, and in fact go negative, in certain circumstances. Fix the way we specify what sequence range to operate on in tcp_sacktag_one() to fix this bug. From Neal Cardwell. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (27 commits) net/ethernet: ks8851_mll fix irq handling veth: Enforce minimum size of VETH_INFO_PEER stmmac: update the driver version to Feb 2012 (v2) stmmac: move hw init in the probe (v2) stmmac: request_irq when use an ext wake irq line (v2) stmmac: do not discard frame on dribbling bit assert ipheth: Add iPhone 4S mlx4: add unicast steering entries to resource_tracker mlx4: fix QP tree trashing mlx4: fix buffer overrun 3c59x: shorten timer period for slave devices netpoll: netpoll_poll_dev() should access dev->flags RxRPC: Fix kcalloc parameters swapped bnx2x: remove the 'poll' module option tcp: fix tcp_shifted_skb() adjustment of lost_cnt_hint for FACK ks8851: Fix NOHZ local_softirq_pending 08 warning bnx2x: fix bnx2x_storm_stats_update() on big endian ixp4xx-eth: fix PHY name to match MDIO bus name octeon: fix PHY name to match MDIO bus name fec: fix PHY name to match fixed MDIO bus name ...
2012-02-19Merge tag 'for-linus' of ↵Linus Torvalds1-2/+2
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap Fixes a bootstrapping issue for some registers when a less commonly used method for register cache initialisation is used. Only affects a fairly small proportion of users that both don't use explicit register defaults and do use the cache. * tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap: regmap: Fix cache defaults initialization from raw cache defaults
2012-02-19Merge tag 'ecryptfs-3.3-rc4-fixes' of ↵Linus Torvalds7-18/+89
git://git.kernel.org/pub/scm/linux/kernel/git/tyhicks/ecryptfs Fixes maximum filename length and filesystem type reporting in statfs() calls and also fixes stale inode mode bits on eCryptfs inodes after a POSIX ACL was set on the lower filesystem's inode. * tag 'ecryptfs-3.3-rc4-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tyhicks/ecryptfs: ecryptfs: remove the second argument of k[un]map_atomic() eCryptfs: Copy up lower inode attrs after setting lower xattr eCryptfs: Improve statfs reporting
2012-02-19Merge tag 'pinctrl' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl pinctrl fixes for v3.3 * tag 'pinctrl-for-torvalds-20120216' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: pinctrl: restore pin naming
2012-02-19Merge branch 'merge' of ↵Linus Torvalds6-31/+42
git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc Here are a few more fixes for powerpc. Some are regressions, the rest is simple/obvious/nasty enough that I deemed it good to go now. Here's also step one of deprecating legacy iSeries support: we are removing it from the main defconfig. Nobody seems to be using it anymore and the code is nasty to maintain, (involves horrible hacks in various low level areas of the kernel) so we plan to actually rip it out at some point. For now let's just avoid building it by default. Stephen will proceed to do the actual removal later (probably 3.4 or 3.5). * 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: powerpc/perf: power_pmu_start restores incorrect values, breaking frequency events powerpc/adb: Use set_current_state() powerpc: Disable interrupts early in Program Check powerpc: Remove legacy iSeries from ppc64_defconfig powerpc/fsl/pci: Fix PCIe fixup regression powerpc: Fix kernel log of oops/panic instruction dump
generated by cgit v1.2.3 (git 2.39.0) at 2024-10-09 08:16:22 +0300