Age | Commit message (Collapse) | Author | Files | Lines |
|
__blk_mq_run_hw_queue just contains a WARN_ON_ONCE for calls from
interrupt context and a blk_mq_run_dispatch_ops-protected call to
blk_mq_sched_dispatch_requests. Open code the call to
blk_mq_sched_dispatch_requests in both callers, and move the WARN_ON_ONCE
to blk_mq_run_hw_queue where it can be extended to all !async calls,
while the other call is from workqueue context and thus obviously does
not need the assert.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Link: https://lore.kernel.org/r/20230413060651.694656-6-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Only blk_mq_run_hw_queue can call __blk_mq_delay_run_hw_queue with
async=false, so move the handling there.
With this __blk_mq_delay_run_hw_queue can be merged into
blk_mq_delay_run_hw_queue.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Link: https://lore.kernel.org/r/20230413060651.694656-5-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
For the in-context dispatch, blk_mq_hctx_stopped is alredy checked in
blk_mq_sched_dispatch_requests under blk_mq_run_dispatch_ops() protection.
For the async dispatch case having a check before scheduling the work
still makes sense to avoid needless workqueue scheduling, so just keep it
for that case.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Link: https://lore.kernel.org/r/20230413060651.694656-4-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
blk_mq_hctx_stopped is already checked in blk_mq_sched_dispatch_requests
under blk_mq_run_dispatch_ops() protection, so remove the duplicate check.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Link: https://lore.kernel.org/r/20230413060651.694656-3-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
__blk_mq_sched_dispatch_requests currently has duplicated logic
for the cases where requests are on the hctx dispatch list or not.
Merge the two with a new need_dispatch variable and remove a few
pointless local variables.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Link: https://lore.kernel.org/r/20230413060651.694656-2-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Replace the boolean at_head argument with the same flags that are already
passed to blk_mq_insert_request.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Link: https://lore.kernel.org/r/20230413064057.707578-21-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Instead of passing a bool at_head, pass down the full flags from the
blk_mq_insert_request interface.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Link: https://lore.kernel.org/r/20230413064057.707578-20-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Replace the boolean at_head argument with the same flags that are already
passed to blk_mq_insert_request.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Link: https://lore.kernel.org/r/20230413064057.707578-19-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Replace the at_head bool with a flags argument that so far only contains
a single BLK_MQ_INSERT_AT_HEAD value. This makes it much easier to grep
for head insertions into the blk-mq dispatch queues.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Link: https://lore.kernel.org/r/20230413064057.707578-18-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
blk_mq_add_to_requeue_list takes a bool parameter to control how to kick
the requeue list at the end of the function. Move the call to
blk_mq_kick_requeue_list to the callers that want it instead.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Link: https://lore.kernel.org/r/20230413064057.707578-17-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
blk_mq_request_bypass_insert takes a bool parameter to control how to run
the queue at the end of the function. Move the blk_mq_run_hw_queue call
to the callers that want it instead.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Link: https://lore.kernel.org/r/20230413064057.707578-16-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
blk_mq_insert_request takes two bool parameters to control how to run
the queue at the end of the function. Move the blk_mq_run_hw_queue call
to the callers that want it instead.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Link: https://lore.kernel.org/r/20230413064057.707578-15-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Due to the wildly different behavior based on the bypass_insert argument,
not a whole lot of code in __blk_mq_try_issue_directly is actually shared
between blk_mq_try_issue_directly and blk_mq_request_issue_directly.
Remove __blk_mq_try_issue_directly and fold the code into the two callers
instead.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Link: https://lore.kernel.org/r/20230413064057.707578-14-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Factor out a helper from __blk_mq_try_issue_directly in preparation
of folding that function into its two callers.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Link: https://lore.kernel.org/r/20230413064057.707578-13-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Split the RQF_DONTPREP and RQF_SOFTBARRIER in separate branches to make
the code more readable.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Link: https://lore.kernel.org/r/20230413064057.707578-12-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
While both passthrough and flush requests call directly into
blk_mq_request_bypass_insert, the parameters aren't the same.
Split the handling into two separate conditionals and turn the whole
function into an if/elif/elif/else flow instead of the gotos.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Link: https://lore.kernel.org/r/20230413064057.707578-11-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Just call blk_mq_add_to_requeue_list directly from the two callers.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Link: https://lore.kernel.org/r/20230413064057.707578-10-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Remove this very small helper and fold it into the only caller.
Note that this moves the trace_block_rq_insert out of ctx->lock, matching
the other calls to this tracepoint.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Link: https://lore.kernel.org/r/20230413064057.707578-9-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
There is no good point in keeping the __blk_mq_insert_request around
for two function calls and a singler caller.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Link: https://lore.kernel.org/r/20230413064057.707578-8-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
blk_mq_sched_insert_request is the main request insert helper and not
directly I/O scheduler related. Move blk_mq_sched_insert_request to
blk-mq.c, rename it to blk_mq_insert_request and mark it static.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Link: https://lore.kernel.org/r/20230413064057.707578-7-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
blk_mq_dispatch_plug_list is the only caller of
blk_mq_sched_insert_requests, and it makes sense to just fold it there
as blk_mq_sched_insert_requests isn't specific to I/O schedulers despite
the name.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Link: https://lore.kernel.org/r/20230413064057.707578-6-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Move all logic related to the direct insert (including the call to
blk_mq_run_hw_queue) into blk_mq_insert_requests to streamline the code
flow up a bit, and to allow marking blk_mq_try_issue_list_directly
static.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Link: https://lore.kernel.org/r/20230413064057.707578-5-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
block/blk-mq.h needs various definitions from <linux/blk-mq.h>,
include it there instead of relying on the source files to include
both.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Link: https://lore.kernel.org/r/20230413064057.707578-4-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
blk-mq-tag.h is always included by blk-mq.h, and causes recursive
inclusion hell with further changes. Just merge it into blk-mq.h
instead.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Link: https://lore.kernel.org/r/20230413064057.707578-3-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Plugs never insert at head, so don't plug for head insertions.
Fixes: 1c2d2fff6dc0 ("block: wire-up support for passthrough plugging")
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Link: https://lore.kernel.org/r/20230413064057.707578-2-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
blk_throtl_register() will unconditionally enable blk-stat for gendisk
when register, even when we have no BLK_DEV_THROTTLING_LOW config.
Since the kernel always has only BLK_DEV_THROTTLING config and the
BLK_DEV_THROTTLING_LOW config is still in EXPERIMENTAL state, we can
just skip blk-stat when !BLK_DEV_THROTTLING_LOW.
Signed-off-by: Chengming Zhou <zhouchengming@bytedance.com>
Acked-by: Tejun Heo <tj@kernel.org>
Link: https://lore.kernel.org/r/20230413062805.2081970-2-chengming.zhou@linux.dev
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
We need to set QUEUE_FLAG_STATS for two cases:
1. blk_stat_enable_accounting()
2. blk_stat_add_callback()
So we should clear it only when ((q->stats->accounting == 0) &&
list_empty(&q->stats->callbacks)).
blk_stat_disable_accounting() only check if q->stats->accounting
is 0 before clear the flag, this patch fix it.
Also add list_empty(&q->stats->callbacks)) check when enable, or
the flag is already set.
The bug can be reproduced on kernel without BLK_DEV_THROTTLING
(since it unconditionally enable accounting, see the next patch).
# cat /sys/block/sr0/queue/scheduler
none mq-deadline [bfq]
# cat /sys/kernel/debug/block/sr0/state
SAME_COMP|IO_STAT|INIT_DONE|STATS|REGISTERED|NOWAIT|30
# echo none > /sys/block/sr0/queue/scheduler
# cat /sys/kernel/debug/block/sr0/state
SAME_COMP|IO_STAT|INIT_DONE|REGISTERED|NOWAIT
# cat /sys/block/sr0/queue/wbt_lat_usec
75000
We can see that after changing elevator from "bfq" to "none",
"STATS" flag is lost even though WBT callback still need it.
Fixes: 68497092bde9 ("block: make queue stat accounting a reference")
Cc: <stable@vger.kernel.org> # v5.17+
Signed-off-by: Chengming Zhou <zhouchengming@bytedance.com>
Acked-by: Tejun Heo <tj@kernel.org>
Link: https://lore.kernel.org/r/20230413062805.2081970-1-chengming.zhou@linux.dev
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Other rq_qos policies such as wbt and iocost are lazy-initialized when they
are configured for the first time for the device but iolatency is
initialized unconditionally from blkcg_init_disk() during gendisk init. Lazy
init is beneficial because rq_qos policies add runtime overhead when
initialized as every IO has to walk all registered rq_qos callbacks.
This patch switches iolatency to lazy initialization too so that it only
registered its rq_qos policy when it is first configured.
Note that there is a known race condition between blkcg config file writes
and del_gendisk() and this patch makes iolatency susceptible to it by
exposing the init path to race against the deletion path. However, that
problem already exists in iocost and is being worked on.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Cc: Josef Bacik <josef@toxicpanda.com>
Link: https://lore.kernel.org/r/20230413000649.115785-5-tj@kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
The name was too generic given that there are multiple blkcg rq-qos
policies.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Cc: Josef Bacik <josef@toxicpanda.com>
Link: https://lore.kernel.org/r/20230413000649.115785-4-tj@kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
We want to support lazy init of rq-qos policies so that iolatency is enabled
lazily on configuration instead of gendisk initialization. The way blkg
config helpers are structured now is a bit awkward for that. Let's
restructure:
* blkcg_conf_open_bdev() is renamed to blkg_conf_open_bdev(). The blkcg_
prefix was used because the bdev opening step is blkg-independent.
However, the distinction is too subtle and confuses more than helps. Let's
switch to blkg prefix so that it's consistent with the type and other
helper names.
* struct blkg_conf_ctx now remembers the original input string and is always
initialized by the new blkg_conf_init().
* blkg_conf_open_bdev() is updated to take a pointer to blkg_conf_ctx like
blkg_conf_prep() and can be called multiple times safely. Instead of
modifying the double pointer to input string directly,
blkg_conf_open_bdev() now sets blkg_conf_ctx->body.
* blkg_conf_finish() is renamed to blkg_conf_exit() for symmetry and now
must be called on all blkg_conf_ctx's which were initialized with
blkg_conf_init().
Combined, this allows the users to either open the bdev first or do it
altogether with blkg_conf_prep() which will help implementing lazy init of
rq-qos policies.
blkg_conf_init/exit() will also be used implement synchronization against
device removal. This is necessary because iolat / iocost are configured
through cgroupfs instead of one of the files under /sys/block/DEVICE. As
cgroupfs operations aren't synchronized with block layer, the lazy init and
other configuration operations may race against device removal. This patch
makes blkg_conf_init/exit() used consistently for all cgroup-orginating
configurations making them a good place to implement explicit
synchronization.
Users are updated accordingly. No behavior change is intended by this patch.
v2: bfq wasn't updated in v1 causing a build error. Fixed.
v3: Update the description to include future use of blkg_conf_init/exit() as
synchronization points.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Josef Bacik <josef@toxicpanda.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Yu Kuai <yukuai1@huaweicloud.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20230413000649.115785-3-tj@kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Now that all RCU flavors have been combined either holding a spin lock,
disabling irq or disabling preemption implies RCU read lock, so there's no
need to use rcu_read_[un]lock() explicitly while holding queue_lock. This
shouldn't cause any behavior changes.
v2: Description updated. Leave __acquires/release on queue_lock alone.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20230413000649.115785-2-tj@kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
The DASD driver does not kick the requeue list when requeuing IO requests
to the blocklayer. This might lead to hanging blockdevice when there is
no other trigger for this.
Fix by automatically kick the requeue list when requeuing DASD requests
to the blocklayer.
Fixes: e443343e509a ("s390/dasd: blk-mq conversion")
CC: stable@vger.kernel.org # 4.14+
Signed-off-by: Stefan Haberland <sth@linux.ibm.com>
Reviewed-by: Jan Hoeppner <hoeppner@linux.ibm.com>
Reviewed-by: Halil Pasic <pasic@linux.ibm.com>
Link: https://lore.kernel.org/r/20230405142017.2446986-8-sth@linux.ibm.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Add a check for errors in the start_io function that signal a not
working device. Trigger an autoquiesce event in that case.
Signed-off-by: Stefan Haberland <sth@linux.ibm.com>
Reviewed-by: Jan Hoeppner <hoeppner@linux.ibm.com>
Reviewed-by: Halil Pasic <pasic@linux.ibm.com>
Link: https://lore.kernel.org/r/20230405142017.2446986-7-sth@linux.ibm.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Add a sysfs attribute aq_timeouts that controls after how many
timeouts a autoquiesce event might be triggered.
The default value is 32768 which is the maximum number of retries
for the DASD device driver DASD_RETRIES_MAX. This means that the
timeout trigger will never happen.
The default value for DASD retries is 255.
Setting the value to below 255 will trigger the timeout autoquiesce
event before an IO error is generated.
Also add the check for the configured amount of timeouts and trigger
an autoquiesce event if exceeded.
Signed-off-by: Stefan Haberland <sth@linux.ibm.com>
Reviewed-by: Jan Hoeppner <hoeppner@linux.ibm.com>
Reviewed-by: Halil Pasic <pasic@linux.ibm.com>
Link: https://lore.kernel.org/r/20230405142017.2446986-6-sth@linux.ibm.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Add a sysfs attribute to control if all IO requests will be requeued to
the blocklayer in case of an autoquiesce event or not.
A value of 1 means that in case of an autoquiesce event all IO requests
will be requeued to the blocklayer.
A value of 0 means that the device will only be stopped.
Signed-off-by: Stefan Haberland <sth@linux.ibm.com>
Reviewed-by: Jan Hoeppner <hoeppner@linux.ibm.com>
Reviewed-by: Halil Pasic <pasic@linux.ibm.com>
Link: https://lore.kernel.org/r/20230405142017.2446986-5-sth@linux.ibm.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Add sysfs attribute that controls the DASD autoquiesce feature.
The autoquiesce is disabled when 0 is echoed to the attribute.
A value greater than 0 will enable the feature.
The aq_mask attribute will accept an unsigned integer and the value
will be interpreted as bitmask defining the trigger events that will
lead to an automatic quiesce.
The following autoquiesce triggers will currently be available:
DASD_EER_FATALERROR 1 - any final I/O error
DASD_EER_NOPATH 2 - no remaining paths for the device
DASD_EER_STATECHANGE 3 - a state change interrupt occurred
DASD_EER_PPRCSUSPEND 4 - the device is PPRC suspended
DASD_EER_NOSPC 5 - there is no space remaining on an ESE device
DASD_EER_TIMEOUT 6 - a certain amount of timeouts occurred
DASD_EER_STARTIO 7 - the IO start function encountered an error
The currently supported maximum value is 255.
Bit 31 is reserved for internal usage.
Bit 0 is not used.
Example:
- deactivate autoquiesce
$ echo 0 > /sys/bus/ccw/0.0.1234/aq_mask
- enable autoquiesce for FATALERROR, NOPATH and TIMEOUT
(0000 0000 0000 0000 0000 0000 0100 0110 => 70)
$ echo 70 > /sys/bus/ccw/0.0.1234/aq_mask
Signed-off-by: Stefan Haberland <sth@linux.ibm.com>
Reviewed-by: Jan Hoeppner <hoeppner@linux.ibm.com>
Reviewed-by: Halil Pasic <pasic@linux.ibm.com>
Link: https://lore.kernel.org/r/20230405142017.2446986-4-sth@linux.ibm.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Add the internal logic to check for autoquiesce triggers and handle
them.
Quiesce and resume are functions that tell Linux to stop/resume
issuing I/Os to a specific DASD.
The DASD driver allows a manual quiesce/resume via ioctl.
Autoquiesce will define an amount of triggers that will lead to
an automatic quiesce if a certain event occurs.
There is no automatic resume.
All events will be reported via DASD Extended Error Reporting (EER)
if configured.
Signed-off-by: Stefan Haberland <sth@linux.ibm.com>
Reviewed-by: Jan Hoeppner <hoeppner@linux.ibm.com>
Reviewed-by: Halil Pasic <pasic@linux.ibm.com>
Link: https://lore.kernel.org/r/20230405142017.2446986-3-sth@linux.ibm.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Remove definitions that have never been used.
Signed-off-by: Stefan Haberland <sth@linux.ibm.com>
Reviewed-by: Jan Hoeppner <hoeppner@linux.ibm.com>
Reviewed-by: Halil Pasic <pasic@linux.ibm.com>
Link: https://lore.kernel.org/r/20230405142017.2446986-2-sth@linux.ibm.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
blkcg_policy cpd_init_fn() is used to just initialize some default
fields of policy data, which is enough to do in cpd_alloc_fn().
This patch delete the only user bfq_cpd_init(), and remove cpd_init_fn
from blkcg_policy.
Signed-off-by: Chengming Zhou <zhouchengming@bytedance.com>
Acked-by: Tejun Heo <tj@kernel.org>
Link: https://lore.kernel.org/r/20230406145050.49914-4-zhouchengming@bytedance.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
cpd_bind_fn is just used for update default weight when block
subsys attached to a hierarchy. No any policy need it anymore.
Signed-off-by: Chengming Zhou <zhouchengming@bytedance.com>
Acked-by: Tejun Heo <tj@kernel.org>
Link: https://lore.kernel.org/r/20230406145050.49914-3-zhouchengming@bytedance.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
BFQ_WEIGHT_LEGACY_DFL is the same as CGROUP_WEIGHT_DFL, which means
we don't need cpd_bind_fn() callback to update default weight when
attached to a hierarchy.
This patch remove BFQ_WEIGHT_LEGACY_DFL and cpd_bind_fn().
Signed-off-by: Chengming Zhou <zhouchengming@bytedance.com>
Acked-by: Tejun Heo <tj@kernel.org>
Link: https://lore.kernel.org/r/20230406145050.49914-2-zhouchengming@bytedance.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
It returns following attributes:
locking range start
locking range length
read lock enabled
write lock enabled
lock state (RW, RO or LK)
It can be retrieved by user authority provided the authority
was added to locking range via prior IOC_OPAL_ADD_USR_TO_LR
ioctl command. The command was extended to add user in ACE that
allows to read attributes listed above.
Signed-off-by: Ondrej Kozina <okozina@redhat.com>
Tested-by: Luca Boccassi <bluca@debian.org>
Tested-by: Milan Broz <gmazyland@gmail.com>
Link: https://lore.kernel.org/r/20230405111223.272816-6-okozina@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Refactors current code querying single column to use the
new helper. Real multi column usage will be added later.
Signed-off-by: Ondrej Kozina <okozina@redhat.com>
Tested-by: Luca Boccassi <bluca@debian.org>
Tested-by: Milan Broz <gmazyland@gmail.com>
Acked-by: Christian Brauner <brauner@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20230405111223.272816-5-okozina@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Extend ACE set of locking range attributes accessible to user
authority. This patch allows user authority to get following
locking range attribues when user get added to locking range via
IOC_OPAL_ADD_USR_TO_LR:
locking range start
locking range end
read lock enabled
write lock enabled
read locked
write locked
lock on reset
active key
Note: Admin1 authority always remains in the ACE. Otherwise
it breaks current userspace expecting Admin1 in the ACE (sedutils).
See TCG OPAL2 s.4.3.1.7 "ACE_Locking_RangeNNNN_Get_RangeStartToActiveKey".
Signed-off-by: Ondrej Kozina <okozina@redhat.com>
Tested-by: Luca Boccassi <bluca@debian.org>
Tested-by: Milan Broz <gmazyland@gmail.com>
Acked-by: Christian Brauner <brauner@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20230405111223.272816-4-okozina@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Move ACE construction away from add_user_to_lr routine
and refactor it to be used also in later code.
Also adds boolean operators defines from TCG Core
specification.
Signed-off-by: Ondrej Kozina <okozina@redhat.com>
Tested-by: Luca Boccassi <bluca@debian.org>
Tested-by: Milan Broz <gmazyland@gmail.com>
Link: https://lore.kernel.org/r/20230405111223.272816-3-okozina@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
While adding user authority in boolean ace value
of uid OPAL_LOCKINGRANGE_ACE_WRLOCKED or
OPAL_LOCKINGRANGE_ACE_RDLOCKED, it was added twice.
It seemed redundant when only single authority was added
in the set method aka { authority1, authority1, OR }:
TCG Storage Architecture Core Specification, 5.1.3.3 ACE_expression
"This is an alternative type where the options are either a uidref to an
Authority object or one of the boolean_ACE (AND = 0 and OR = 1) options.
This type is used within the AC_element list to form a postfix Boolean
expression of Authorities."
Signed-off-by: Ondrej Kozina <okozina@redhat.com>
Tested-by: Luca Boccassi <bluca@debian.org>
Tested-by: Milan Broz <gmazyland@gmail.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Acked-by: Christian Brauner <brauner@kernel.org>
Link: https://lore.kernel.org/r/20230405111223.272816-2-okozina@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
'struct ublk_map_data' is passed to ublk_copy_user_pages()
for copying data between userspace buffer and request pages.
Here what matters is userspace buffer address/len and 'struct request',
so replace ->io field with user buffer address, and rename max_bytes
as len.
Meantime remove 'ubq' field from ublk_map_data, since it isn't used
any more.
Then code becomes more readable.
Reviewed-by: Ziyang Zhang <ZiyangZhang@linux.alibaba.com>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Convert the following pattern in several helpers
if (Z)
return true
return false
into:
return Z;
Reviewed-by: Ziyang Zhang <ZiyangZhang@linux.alibaba.com>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Add two helpers for checking if map/unmap is needed, since we may have
passthrough request which needs map or unmap in future, such as for
supporting report zones.
Meantime don't mark ublk_copy_user_pages as inline since this function
is a bit fat now.
Reviewed-by: Ziyang Zhang <ZiyangZhang@linux.alibaba.com>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
There isn't data in request of REQ_OP_FLUSH always, so don't consider
it in both ublk_map_io() and ublk_unmap_io().
Reviewed-by: Ziyang Zhang <ZiyangZhang@linux.alibaba.com>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|