summaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2012-11-08packet: tx_ring: allow the user to choose tx data offsetPaul Chavent4-1/+60
The tx data offset of packet mmap tx ring used to be : (TPACKET2_HDRLEN - sizeof(struct sockaddr_ll)) The problem is that, with SOCK_RAW socket, the payload (14 bytes after the beginning of the user data) is misaligned. This patch allows to let the user gives an offset for it's tx data if he desires. Set sock option PACKET_TX_HAS_OFF to 1, then specify in each frame of your tx ring tp_net for SOCK_DGRAM, or tp_mac for SOCK_RAW. Signed-off-by: Paul Chavent <paul.chavent@onera.fr> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-11-08net: fec: reduce spin lock time in fec_ptp_adjfreqFrank Li1-8/+6
move below calculate out of spin lock section diff = fep->cc.mult; diff *= ppb; diff = div_u64(diff, 1000000000ULL); diff is local variable and not neccesary in spin lock Signed-off-by: Frank Li <Frank.Li@freescale.com> Acked-by: Richard Cochran <richardcochran@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-11-08net: fec: default select FEC_PTP at mx6 platformFrank Li1-2/+2
Remove PPS. Limit FEC_PTP option for i.MX chip only. FEC_PTP default is on at mx6 platform. Signed-off-by: Frank Li <Frank.Li@freescale.com> Acked-by: Richard Cochran <richardcochran@gmail.com> Acked-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-11-08net/at91_ether: fix comment and style issuesJoachim Eastwood1-60/+51
Signed-off-by: Joachim Eastwood <manabian@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-11-08net/at91_ether: clean up print outsJoachim Eastwood1-10/+7
Convert all printk's to netdev_ counterparts and fix up some printed texts. Signed-off-by: Joachim Eastwood <manabian@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-11-08net/at91_ether: drop board_data private struct memberJoachim Eastwood2-8/+1
No longer used after gpio phy interrupt support was removed from at91_ether. Signed-off-by: Joachim Eastwood <manabian@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-11-08net/at91_ether: use stat function from macbJoachim Eastwood3-42/+11
Signed-off-by: Joachim Eastwood <manabian@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-11-08net/at91_ether: use macb functions for get/set hwaddrJoachim Eastwood1-109/+3
Signed-off-by: Joachim Eastwood <manabian@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-11-08net/macb: export macb_set_hwaddr and macb_get_hwaddrJoachim Eastwood2-3/+7
for usage in at91_ether driver. Signed-off-by: Joachim Eastwood <manabian@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-11-08net/macb: support reversed hw addrJoachim Eastwood1-6/+18
This is used on one AT91RM9200 board where a bootloader stores the Ethernet address in the wrong order. Support this on macb so address setting functions can be shared with the at91_ether driver. Signed-off-by: Joachim Eastwood <manabian@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-11-08net/macb: check all address registers setsJoachim Eastwood1-15/+20
The macb driver in u-boot uses the first register set while the at91_ether driver in u-boot uses the second register set. By checking all register set, like at91_ether does, this code can be shared between the drivers. This only changes behavior on macb if no vaild address is found in the first register set. Signed-off-by: Joachim Eastwood <manabian@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-11-08be2net: remove adapter->eq_next_idxSathya Perla2-4/+0
It's not used anywhere Signed-off-by: Sathya Perla <sathya.perla@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-11-08be2net: remove roce on lancerSathya Perla3-29/+4
roce interface is suppored only on Skyhawk-R. Signed-off-by: Sathya Perla <sathya.perla@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-11-08be2net: fix access to SEMAPHORE regSathya Perla4-22/+11
The SEMAPHORE register was being accessed from the csr BAR space. This BAR may not be available in some Skyhawk-R configurations. Instead, access this register via the PCI config space (it's available there too). Signed-off-by: Sathya Perla <sathya.perla@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-11-08be2net: re-factor bar mapping codeSathya Perla1-95/+42
1) separate NIC and roce bar mapping code 2) parse sli_intf::if_type inside be_map_pci_bars() as if_type must be used only to identify bars. 3) Use pci_iomap/unmap() routines Signed-off-by: Sathya Perla <sathya.perla@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-11-08be2net: do not use sli_family to identify skyhawk-R chipSathya Perla4-9/+4
SKYHAWK_FAMILY will not identify all revisions of the chip. Use device-id check (skyhawk_chip() macro) instead. Signed-off-by: Sathya Perla <sathya.perla@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-11-08be2net: fix wrong usage of adapter->generationSathya Perla4-93/+92
adapter->generation was being incorrectly set as BE_GEN3 for Skyhawk-R. Replace generation usage with XXX_chip() macros to identify the chip. Signed-off-by: Sathya Perla <sathya.perla@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-11-08be2net: remove LANCER A0 workaroundSathya Perla1-10/+0
It's not needed anymore. Signed-off-by: Sathya Perla <sathya.perla@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-11-08mlx4: change TX coalescing defaultsEric Dumazet2-2/+2
mlx4 currently uses a too high tx coalescing setting, deferring TX completion interrupts by up to 128 us. With the recent skb_orphan() removal in commit 8112ec3b872, performance of a single TCP flow is capped to ~4 Gbps, unless we increase tcp_limit_output_bytes. I suggest using 16 us instead of 128 us, allowing a finer control. Performance of a single TCP flow is restored to previous levels, while keeping TCP small queues fully enabled with default sysctl. This patch is also a BQL prereq. Reported-by: Vimalkumar <j.vimal@gmail.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Yevgeny Petrilin <yevgenyp@mellanox.com> Cc: Or Gerlitz <ogerlitz@mellanox.com> Acked-by: Amir Vadai <amirv@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-11-07usbnet: runtime wake up device before calling usbnet_{read|write}_cmdMing Lei1-4/+16
This patch gets the runtime PM reference count before calling usbnet_{read|write}_cmd, and puts it after completion of the usbnet_{read|write}_cmd, so that the usb control message can always be sent to one active device in the non-PM context. Signed-off-by: Ming Lei <ming.lei@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-11-07usbnet: smsc95xx: apply the introduced usbnet_{read|write}_cmd_nopmMing Lei1-49/+85
This patch applies the introduced usbnet_read_cmd_nopm() and usbnet_write_cmd_nopm() in the callback of resume and suspend to avoid deadlock if USB runtime PM is considered into usbnet_read_cmd() and usbnet_write_cmd(). Cc: Steve Glendinning <steve.glendinning@shawell.net> Signed-off-by: Ming Lei <ming.lei@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-11-07usbnet: smsc95xx: fix memory leak in smsc95xx_suspendMing Lei1-3/+10
This patch fixes memory leak in smsc95xx_suspend. Also, it isn't necessary to bother mm to allocate 8bytes/16byte, and we can use stack variable safely. Acked-By: Steve Glendinning <steve.glendinning@shawell.net> Signed-off-by: Ming Lei <ming.lei@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-11-07usbnet: smsc75xx: apply the introduced usbnet_{read|write}_cmd_nopmMing Lei1-57/+90
This patch applies the introduced usbnet_read_cmd_nopm() and usbnet_write_cmd_nopm() in the callback of resume and suspend to avoid deadlock if USB runtime PM is considered into usbnet_read_cmd() and usbnet_write_cmd(). Cc: Steve Glendinning <steve.glendinning@shawell.net> Signed-off-by: Ming Lei <ming.lei@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-11-07usbnet: introduce usbnet_{read|write}_cmd_nopmMing Lei2-5/+61
This patch introduces the below two helpers to prepare for solving the usbnet runtime PM problem, which may cause some network utilities (ifconfig, ethtool,...) touch a suspended device. usbnet_read_cmd_nopm() usbnet_write_cmd_nopm() The above two helpers should be called by usbnet resume/suspend callback to avoid deadlock. Signed-off-by: Ming Lei <ming.lei@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-11-07net: calxedaxgmac: ip align receive buffersRob Herring1-5/+6
On gcc 4.7, we will get alignment traps in the ip stack if we don't align the ip headers on receive. The h/w can support this, so use ip aligned allocations. Cut down the unnecessary padding on the allocation. The buffer can start on any byte alignment, but the size including the begining offset must be 8 byte aligned. So the h/w buffer size must include the NET_IP_ALIGN offset. Thanks to Eric Dumazet for the initial patch highlighting the padding issues. Signed-off-by: Rob Herring <rob.herring@calxeda.com> Acked-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-11-07net: calxedaxgmac: rework transmit ring handlingRob Herring1-12/+12
Only generate tx interrupts on every ring size / 4 descriptors. Move the netif_stop_queue call to the end of the xmit function rather than checking at the beginning. Signed-off-by: Rob Herring <rob.herring@calxeda.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-11-07net: calxedaxgmac: drop some unnecessary register writesRob Herring1-6/+0
The interrupts have already been cleared, so we don't need to clear them again. Also, we could miss interrupts if they are cleared, but we don't process the packet. Signed-off-by: Rob Herring <rob.herring@calxeda.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-11-07net: calxedaxgmac: use raw i/o accessors in rx and tx pathsRob Herring1-6/+6
The standard readl/writel accessors involve a spinlock and cache sync operation on ARM platforms with an outer cache. Only DMA triggering accesses need this, so use the raw variants instead in the critical paths. The relaxed variants would be more appropriate, but don't exist on all arches. Signed-off-by: Rob Herring <rob.herring@calxeda.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-11-07net: calxedaxgmac: remove explicit rx dma buffer pollingRob Herring1-3/+1
New received frames will trigger the rx DMA to poll the DMA descriptors, so there is no need to tell the h/w to poll. We also want to enable dropping frames from the fifo when there is no buffer. Signed-off-by: Rob Herring <rob.herring@calxeda.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-11-07net: calxedaxgmac: enable operate on 2nd frame modeRob Herring1-2/+2
Enable the tx dma to start reading the next frame while sending the current frame. Signed-off-by: Rob Herring <rob.herring@calxeda.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-11-07htb: fix two bugsEric Dumazet1-12/+5
Commit 56b765b79e9 (htb: improved accuracy at high rates) introduced two bugs : 1) one bstats_update() was inadvertently removed from htb_dequeue_tree(), breaking statistics/rate estimation. 2) Missing qdisc_put_rtab() calls in htb_change_class(), leaking kernel memory, now struct htb_class no longer retains pointers to qdisc_rate_table structs. Since only rate is used, dont use qdisc_get_rtab() calls copying data we ignore anyway. Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Vimalkumar <j.vimal@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-11-07tg3: Call tg3_netif_stop() from tg3_stop()Nithin Nayak Sujir1-5/+3
instead of making separate tg3_napi_disable() and netif_tx_disable() calls. Update version to 3.126. Signed-off-by: Nithin Nayak Sujir <nsujir@broadcom.com> Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-11-07tg3: Support 5717 C0Michael Chan2-1/+10
Add support for 5717C0 which is a 5720A0 with special bonds-out option. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-11-07net: at91_ether: add pinctrl supportJean-Christophe PLAGNIOL-VILLARD1-0/+11
If no pinctrl available just report a warning as some architecture may not need to do anything. Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Tested-by: Joachim Eastwood <manabian@gmail.com> Cc: Nicolas Ferre <nicolas.ferre@atmel.com> Cc: netdev@vger.kernel.org Signed-off-by: David S. Miller <davem@davemloft.net>
2012-11-07net: at91_ether: add dt supportJean-Christophe PLAGNIOL-VILLARD2-7/+89
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Tested-by: Joachim Eastwood <manabian@gmail.com> Cc: Nicolas Ferre <nicolas.ferre@atmel.com> Cc: netdev@vger.kernel.org Signed-off-by: David S. Miller <davem@davemloft.net>
2012-11-07drivers: ethernet: qlogic: netxen_nic_ethtool.c: Fixed a coding style issueKumar Amit Mehta1-43/+43
Fixed some coding style issues. Signed-off-by: Kumar Amit Mehta <gmate.amit@gmail.com> Acked-by: Rajesh Borundia <rajesh.borundia@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-11-07drivers: ethernet: qlogic: qlge_dbg.c: Fixed a coding style issueKumar Amit Mehta1-8/+8
checkpatch.pl throws error message for the current code. This patch fixes this coding style issue. Signed-off-by: Kumar Amit Mehta <gmate.amit@gmail.com> Acked-by: Jitendra Kalsaria <Jitendra.kalsaria@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-11-07sparc: bpf_jit_comp: add VLAN instructions for BPF JITDaniel Borkmann1-0/+19
This patch is a follow-up for patch "net: filter: add vlan tag access" to support the new VLAN_TAG/VLAN_TAG_PRESENT accessors in BPF JIT. Signed-off-by: Daniel Borkmann <daniel.borkmann@tik.ee.ethz.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-11-04r8169: enable internal ASPM and clock request settingshayeswang1-9/+21
The following chips need to enable internal settings to let ASPM and clock request work. RTL8111E-VL, RTL8111F, RTL8411, RTL8111G RTL8105, RTL8402, RTL8106 Signed-off-by: Hayes Wang <hayeswang@realtek.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-11-04bridge: Avoid 'statement with no effect' compiler warningsLee Jones1-4/+4
Instead of issuing (0) statements when !CONFIG_SYSFS which will cause 'warning: ', we'll use inline statements instead. This will effectively do the same thing, but suppress any unnecessary warnings. Cc: Stephen Hemminger <shemminger@vyatta.com> Cc: bridge@lists.linux-foundation.org Cc: netdev@vger.kernel.org Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-11-03drivers/net/ethernet/ibm/emac/mal.c: use WARNJulia Lawall1-4/+2
Use WARN rather than printk followed by WARN_ON(1), for conciseness. A simplified version of the semantic patch that makes this transformation is as follows: (http://coccinelle.lip6.fr/) // <smpl> @@ expression list es; @@ -printk( +WARN(1, es); -WARN_ON(1); // </smpl> Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-11-03atp: remove set_rx_mode_8012()Paul Bolle2-58/+2
Building atp.o triggers this GCC warning: drivers/net/ethernet/realtek/atp.c: In function ‘set_rx_mode’: drivers/net/ethernet/realtek/atp.c:871:26: warning: ‘mc_filter[0]’ may be used uninitialized in this function [-Wuninitialized] GCC is correct. In promiscuous mode 'mc_filter' will be used uninitialized in set_rx_mode_8012(), which is apparently inlined into set_rx_mode(). But it turns out set_rx_mode_8012() will never be called, since net_local.chip_type will always be RTL8002. So we can just remove set_rx_mode_8012() and do some related cleanups. Signed-off-by: Paul Bolle <pebolle@tiscali.nl> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-11-03cpsw: fix leaking IO mappingsRichard Cochran1-9/+8
The CPSW driver remaps two different IO regions, but fails to unmap them both. This patch fixes the issue by calling iounmap in the appropriate places. Signed-off-by: Richard Cochran <richardcochran@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-11-03cpsw: rename register banks to match the reference manual, part 2Richard Cochran1-13/+13
The code mixes up the CPSW_SS and the CPSW_WR register naming. This patch changes the names to conform to the published Technical Reference Manual from TI, in order to make working on the code less confusing. Signed-off-by: Richard Cochran <richardcochran@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-11-03net: fix bridge notify hook to manage flags correctlyJohn Fastabend1-8/+18
The bridge notify hook rtnl_bridge_notify() was not handling the case where the master flags was set or with both flags set. First flags are not being passed correctly and second the logic to parse them is broken. This patch passes the original flags value and fixes the logic. Reported-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: John Fastabend <john.r.fastabend@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-11-03macb: Keep driver's speed/duplex in sync with actual NCFGRVitalii Demianets1-0/+2
When underlying phy driver restores its state very fast after being brought down and up so that macb driver function macb_handle_link_change() was never called with link state "down", driver's internal representation of phy speed and duplex (bp->speed and bp->duplex) didn't change. So, macb driver sees no reason to perform actual write to the NCFGR register, although the speed and duplex settings in that register were reset when interface was brought down and up. In that case actual phy speed and duplex differ from NCFGR settings. The patch fixes that by keeping internal driver representation of speed and duplex in sync with actual content of NCFGR. Signed-off-by: Vitalii Demianets <vitas@nppfactor.kiev.ua> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-11-03net: neterion: Do not break word unregister.YOSHIFUJI Hideaki / 吉藤英明1-1/+2
Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-11-03net: sh_eth: Fix a typo - replace regist with register.YOSHIFUJI Hideaki / 吉藤英明1-1/+1
Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-11-03ptp: fixup Kconfig for two PHC drivers.Richard Cochran2-2/+2
Ben Hutchings recently came up with a better way to handle the kconfig dependencies for the PTP hardware clocks. This patch converts one new and one older driver to the new scheme. Signed-off-by: Richard Cochran <richardcochran@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-11-03htb: improved accuracy at high ratesVimalkumar1-38/+90
Current HTB (and TBF) uses rate table computed by the "tc" userspace program, which has the following issue: The rate table has 256 entries to map packet lengths to token (time units). With TSO sized packets, the 256 entry granularity leads to loss/gain of rate, making the token bucket inaccurate. Thus, instead of relying on rate table, this patch explicitly computes the time and accounts for packet transmission times with nanosecond granularity. This greatly improves accuracy of HTB with a wide range of packet sizes. Example: tc qdisc add dev $dev root handle 1: \ htb default 1 tc class add dev $dev classid 1:1 parent 1: \ rate 5Gbit mtu 64k Here is an example of inaccuracy: $ iperf -c host -t 10 -i 1 With old htb: eth4: 34.76 Mb/s In 5827.98 Mb/s Out - 65836.0 p/s In 481273.0 p/s Out [SUM] 9.0-10.0 sec 669 MBytes 5.61 Gbits/sec [SUM] 0.0-10.0 sec 6.50 GBytes 5.58 Gbits/sec With new htb: eth4: 28.36 Mb/s In 5208.06 Mb/s Out - 53704.0 p/s In 430076.0 p/s Out [SUM] 9.0-10.0 sec 594 MBytes 4.98 Gbits/sec [SUM] 0.0-10.0 sec 5.80 GBytes 4.98 Gbits/sec The bits per second on the wire is still 5200Mb/s with new HTB because qdisc accounts for packet length using skb->len, which is smaller than total bytes on the wire if GSO is used. But that is for another patch regardless of how time is accounted. Many thanks to Eric Dumazet for review and feedback. Signed-off-by: Vimalkumar <j.vimal@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.39.0) at 2024-10-12 04:20:30 +0300