summaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2020-07-31perf tools: Fix record failure when mixed with ARM SPE eventWei Li1-4/+4
When recording with cache-misses and arm_spe_x event, I found that it will just fail without showing any error info if i put cache-misses after 'arm_spe_x' event. [root@localhost 0620]# perf record -e cache-misses \ -e arm_spe_0/ts_enable=1,pct_enable=1,pa_enable=1,load_filter=1,jitter=1,store_filter=1,min_latency=0/ sleep 1 [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.067 MB perf.data ] [root@localhost 0620]# [root@localhost 0620]# perf record -e arm_spe_0/ts_enable=1,pct_enable=1,pa_enable=1,load_filter=1,jitter=1,store_filter=1,min_latency=0/ \ -e cache-misses sleep 1 [root@localhost 0620]# The current code can only work if the only event to be traced is an 'arm_spe_x', or if it is the last event to be specified. Otherwise the last event type will be checked against all the arm_spe_pmus[i]->types, none will match and an out of bound 'i' index will be used in arm_spe_recording_init(). We don't support concurrent multiple arm_spe_x events currently, that is checked in arm_spe_recording_options(), and it will show the relevant info. So add the check and record of the first found 'arm_spe_pmu' to fix this issue here. Fixes: ffd3d18c20b8 ("perf tools: Add ARM Statistical Profiling Extensions (SPE) support") Signed-off-by: Wei Li <liwei391@huawei.com> Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org> Tested-by-by: Leo Yan <leo.yan@linaro.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Hanjun Guo <guohanjun@huawei.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Kim Phillips <kim.phillips@arm.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Mike Leach <mike.leach@linaro.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Suzuki Poulouse <suzuki.poulose@arm.com> Cc: linux-arm-kernel@lists.infradead.org Link: http://lore.kernel.org/lkml/20200724071111.35593-2-liwei391@huawei.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2020-07-31perf tests: Fix test 68 zstd compression for s390Thomas Richter1-1/+2
Commit 5aa98879efe7 ("s390/cpum_sf: prohibit callchain data collection") prohibits call graph sampling for hardware events on s390. The information recorded is out of context and does not match. On s390 this commit now breaks test case 68 Zstd perf.data compression/decompression. Therefore omit call graph sampling on s390 in this test. Output before: [root@t35lp46 perf]# ./perf test -Fv 68 68: Zstd perf.data compression/decompression : --- start --- Collecting compressed record file: Error: cycles: PMU Hardware doesn't support sampling/overflow-interrupts. Try 'perf stat' ---- end ---- Zstd perf.data compression/decompression: FAILED! [root@t35lp46 perf]# Output after: [root@t35lp46 perf]# ./perf test -Fv 68 68: Zstd perf.data compression/decompression : --- start --- Collecting compressed record file: 500+0 records in 500+0 records out 256000 bytes (256 kB, 250 KiB) copied, 0.00615638 s, 41.6 MB/s [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.004 MB /tmp/perf.data.X3M, compressed (original 0.002 MB, ratio is 3.609) ] Checking compressed events stats: # compressed : Zstd, level = 1, ratio = 4 COMPRESSED events: 1 2ELIFREPh---- end ---- Zstd perf.data compression/decompression: Ok [root@t35lp46 perf]# Signed-off-by: Thomas Richter <tmricht@linux.ibm.com> Reviewed-by: Sumanth Korikkar <sumanthk@linux.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Sven Schnelle <svens@linux.ibm.com> Cc: Vasily Gorbik <gor@linux.ibm.com> Link: http://lore.kernel.org/lkml/20200729135314.91281-1-tmricht@linux.ibm.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2020-07-31tools lib traceevent: Fix memory leak in process_dynamic_array_lenPhilippe Duplessis-Guindon1-0/+1
I compiled with AddressSanitizer and I had these memory leaks while I was using the tep_parse_format function: Direct leak of 28 byte(s) in 4 object(s) allocated from: #0 0x7fb07db49ffe in __interceptor_realloc (/lib/x86_64-linux-gnu/libasan.so.5+0x10dffe) #1 0x7fb07a724228 in extend_token /home/pduplessis/repo/linux/tools/lib/traceevent/event-parse.c:985 #2 0x7fb07a724c21 in __read_token /home/pduplessis/repo/linux/tools/lib/traceevent/event-parse.c:1140 #3 0x7fb07a724f78 in read_token /home/pduplessis/repo/linux/tools/lib/traceevent/event-parse.c:1206 #4 0x7fb07a725191 in __read_expect_type /home/pduplessis/repo/linux/tools/lib/traceevent/event-parse.c:1291 #5 0x7fb07a7251df in read_expect_type /home/pduplessis/repo/linux/tools/lib/traceevent/event-parse.c:1299 #6 0x7fb07a72e6c8 in process_dynamic_array_len /home/pduplessis/repo/linux/tools/lib/traceevent/event-parse.c:2849 #7 0x7fb07a7304b8 in process_function /home/pduplessis/repo/linux/tools/lib/traceevent/event-parse.c:3161 #8 0x7fb07a730900 in process_arg_token /home/pduplessis/repo/linux/tools/lib/traceevent/event-parse.c:3207 #9 0x7fb07a727c0b in process_arg /home/pduplessis/repo/linux/tools/lib/traceevent/event-parse.c:1786 #10 0x7fb07a731080 in event_read_print_args /home/pduplessis/repo/linux/tools/lib/traceevent/event-parse.c:3285 #11 0x7fb07a731722 in event_read_print /home/pduplessis/repo/linux/tools/lib/traceevent/event-parse.c:3369 #12 0x7fb07a740054 in __tep_parse_format /home/pduplessis/repo/linux/tools/lib/traceevent/event-parse.c:6335 #13 0x7fb07a74047a in __parse_event /home/pduplessis/repo/linux/tools/lib/traceevent/event-parse.c:6389 #14 0x7fb07a740536 in tep_parse_format /home/pduplessis/repo/linux/tools/lib/traceevent/event-parse.c:6431 #15 0x7fb07a785acf in parse_event ../../../src/fs-src/fs.c:251 #16 0x7fb07a785ccd in parse_systems ../../../src/fs-src/fs.c:284 #17 0x7fb07a786fb3 in read_metadata ../../../src/fs-src/fs.c:593 #18 0x7fb07a78760e in ftrace_fs_source_init ../../../src/fs-src/fs.c:727 #19 0x7fb07d90c19c in add_component_with_init_method_data ../../../../src/lib/graph/graph.c:1048 #20 0x7fb07d90c87b in add_source_component_with_initialize_method_data ../../../../src/lib/graph/graph.c:1127 #21 0x7fb07d90c92a in bt_graph_add_source_component ../../../../src/lib/graph/graph.c:1152 #22 0x55db11aa632e in cmd_run_ctx_create_components_from_config_components ../../../src/cli/babeltrace2.c:2252 #23 0x55db11aa6fda in cmd_run_ctx_create_components ../../../src/cli/babeltrace2.c:2347 #24 0x55db11aa780c in cmd_run ../../../src/cli/babeltrace2.c:2461 #25 0x55db11aa8a7d in main ../../../src/cli/babeltrace2.c:2673 #26 0x7fb07d5460b2 in __libc_start_main (/lib/x86_64-linux-gnu/libc.so.6+0x270b2) The token variable in the process_dynamic_array_len function is allocated in the read_expect_type function, but is not freed before calling the read_token function. Free the token variable before calling read_token in order to plug the leak. Signed-off-by: Philippe Duplessis-Guindon <pduplessis@efficios.com> Reviewed-by: Steven Rostedt (VMware) <rostedt@goodmis.org> Link: https://lore.kernel.org/linux-trace-devel/20200730150236.5392-1-pduplessis@efficios.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2020-07-31KVM: SVM: Fix disable pause loop exit/pause filtering capability on SVMWanpeng Li1-3/+6
'Commit 8566ac8b8e7c ("KVM: SVM: Implement pause loop exit logic in SVM")' drops disable pause loop exit/pause filtering capability completely, I guess it is a merge fault by Radim since disable vmexits capabilities and pause loop exit for SVM patchsets are merged at the same time. This patch reintroduces the disable pause loop exit/pause filtering capability support. Reported-by: Haiwei Li <lihaiwei@tencent.com> Tested-by: Haiwei Li <lihaiwei@tencent.com> Fixes: 8566ac8b ("KVM: SVM: Implement pause loop exit logic in SVM") Signed-off-by: Wanpeng Li <wanpengli@tencent.com> Message-Id: <1596165141-28874-3-git-send-email-wanpengli@tencent.com> Cc: stable@vger.kernel.org Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-07-31KVM: LAPIC: Prevent setting the tscdeadline timer if the lapic is hw disabledWanpeng Li1-1/+1
Prevent setting the tscdeadline timer if the lapic is hw disabled. Fixes: bce87cce88 (KVM: x86: consolidate different ways to test for in-kernel LAPIC) Cc: <stable@vger.kernel.org> Signed-off-by: Wanpeng Li <wanpengli@tencent.com> Message-Id: <1596165141-28874-1-git-send-email-wanpengli@tencent.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-07-31Merge tag 'drm-fixes-2020-07-31' of git://anongit.freedesktop.org/drm/drmLinus Torvalds4-15/+60
Pull more drm fixes from Dave Airlie: "As mentioned previously this contains the nouveau regression fix. amdgpu had three fixes outstanding as well, one revert, an info leak and use after free. The use after free is a bit trickier than I'd like, and I've personally gone over it to confirm I'm happy that it is doing what it says. nouveau: - final modifiers regression fix amdgpu: - Revert a fix which caused other regressions - Fix potential kernel info leak - Fix a use-after-free bug that was uncovered by another change in 5.7" * tag 'drm-fixes-2020-07-31' of git://anongit.freedesktop.org/drm/drm: drm/nouveau: Accept 'legacy' format modifiers Revert "drm/amdgpu: Fix NULL dereference in dpm sysfs handlers" drm/amd/display: Clear dm_state for fast updates drm/amdgpu: Prevent kernel-infoleak in amdgpu_info_ioctl()
2020-07-31Merge tag 'amd-drm-fixes-5.8-2020-07-30' of ↵Dave Airlie3-13/+35
git://people.freedesktop.org/~agd5f/linux into drm-fixes amd-drm-fixes-5.8-2020-07-30: amdgpu: - Revert a fix which caused other regressions - Fix potential kernel info leak - Fix a use-after-free bug that was uncovered by another change in 5.7 Signed-off-by: Dave Airlie <airlied@redhat.com> From: Alex Deucher <alexdeucher@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200730154338.244104-1-alexander.deucher@amd.com
2020-07-31drm/nouveau: Accept 'legacy' format modifiersJames Jones1-2/+25
Accept the DRM_FORMAT_MOD_NVIDIA_16BX2_BLOCK() family of modifiers to handle broken userspace Xorg modesetting and Mesa drivers. Existing Mesa drivers are still aware of only these older format modifiers which do not differentiate between different variations of the block linear layout. When the format modifier support flag was flipped in the nouveau kernel driver, the X.org modesetting driver began attempting to use its format modifier-enabled framebuffer path. Because the set of format modifiers advertised by the kernel prior to this change do not intersect with the set of format modifiers advertised by Mesa, allocating GBM buffers using format modifiers fails and the modesetting driver falls back to non-modifier allocation. However, it still later queries the modifier of the GBM buffer when creating its DRM-KMS framebuffer object, receives the old-format modifier from Mesa, and attempts to create a framebuffer with it. Since the kernel is still not aware of these formats, this fails. Userspace should not be attempting to query format modifiers of GBM buffers allocated with a non- format-modifier-aware allocation path, but to avoid breaking existing userspace behavior, this change accepts the old-style format modifiers when creating framebuffers and applying them to planes by translating them to the equivalent new-style modifier. To accomplish this, some layout parameters must be assumed to match properties of the device targeted by the relevant ioctls. To avoid perpetuating misuse of the old-style modifiers, this change does not advertise support for them. Doing so would imply compatibility between devices with incompatible memory layouts. Tested with Xorg 1.20 modesetting driver, weston@c46c70dac84a4b3030cd05b380f9f410536690fc, gnome & KDE wayland desktops from Ubuntu 18.04, and sway 1.5 Reported-by: Kirill A. Shutemov <kirill@shutemov.name> Fixes: fa4f4c213f5f ("drm/nouveau/kms: Support NVIDIA format modifiers") Link: https://lkml.org/lkml/2020/6/30/1251 Signed-off-by: James Jones <jajones@nvidia.com> Acked-by: Ben Skeggs <bskeggs@redhat.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2020-07-31net/mlx5e: fix bpf_prog reference count leaks in mlx5e_alloc_rqXin Xiong1-2/+2
The function invokes bpf_prog_inc(), which increases the reference count of a bpf_prog object "rq->xdp_prog" if the object isn't NULL. The refcount leak issues take place in two error handling paths. When either mlx5_wq_ll_create() or mlx5_wq_cyc_create() fails, the function simply returns the error code and forgets to drop the reference count increased earlier, causing a reference count leak of "rq->xdp_prog". Fix this issue by jumping to the error handling path err_rq_wq_destroy while either function fails. Fixes: 422d4c401edd ("net/mlx5e: RX, Split WQ objects for different RQ types") Signed-off-by: Xin Xiong <xiongx18@fudan.edu.cn> Signed-off-by: Xiyu Yang <xiyuyang19@fudan.edu.cn> Signed-off-by: Xin Tan <tanxin.ctf@gmail.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2020-07-31net/mlx5e: E-Switch, Specify flow_source for rule with no in_portJianbo Liu1-7/+12
The flow_source must be specified, even for rule without matching source vport, because some actions are only allowed in uplink. Otherwise, rule can't be offloaded and firmware syndrome happens. Fixes: 6fb0701a9cfa ("net/mlx5: E-Switch, Add support for offloading rules with no in_port") Signed-off-by: Jianbo Liu <jianbol@mellanox.com> Reviewed-by: Chris Mi <chrism@mellanox.com> Reviewed-by: Roi Dayan <roid@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2020-07-31net/mlx5e: E-Switch, Add misc bit when misc fields changed for mirroringJianbo Liu5-3/+10
The modified flow_context fields in FTE must be indicated in modify_enable bitmask. Previously, the misc bit in modify_enable is always set as source vport must be set for each rule. So, when parsing vxlan/gre/geneve/qinq rules, this bit is not set because those are all from the same misc fileds that source vport fields are located at, and we don't need to set the indicator twice. After adding per vport tables for mirroring, misc bit is not set, then firmware syndrome happens. To fix it, set the bit wherever misc fileds are changed. This also makes it unnecessary to check misc fields and set the misc bit accordingly in metadata matching, so here remove it. Besides, flow_source must be specified for uplink because firmware will check it and some actions are only allowed for packets received from uplink. Fixes: 96e326878fa5 ("net/mlx5e: Eswitch, Use per vport tables for mirroring") Signed-off-by: Jianbo Liu <jianbol@mellanox.com> Reviewed-by: Chris Mi <chrism@mellanox.com> Reviewed-by: Roi Dayan <roid@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2020-07-31net/mlx5e: CT: Support restore ipv6 tunnelJianbo Liu1-9/+21
Currently the driver restores only IPv4 tunnel headers. Add support for restoring IPv6 tunnel header. Fixes: b8ce90370977 ("net/mlx5e: Restore tunnel metadata on miss") Signed-off-by: Jianbo Liu <jianbol@mellanox.com> Reviewed-by: Roi Dayan <roid@mellanox.com> Reviewed-by: Oz Shlomo <ozsh@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2020-07-31Merge tag 'mac80211-for-davem-2020-07-30' of ↵David S. Miller7-9/+27
git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211 Johannes Berg says: ==================== A couple of more changes: * remove a warning that can trigger in certain races * check a function pointer before using it * check before adding 6 GHz to avoid a warning in mesh * fix two memory leaks in mesh * fix a TX status bug leading to a memory leak ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-31net: gemini: Fix missing clk_disable_unprepare() in error path of ↵Wang Hai1-1/+4
gemini_ethernet_port_probe() Fix the missing clk_disable_unprepare() before return from gemini_ethernet_port_probe() in the error handling case. Fixes: 4d5ae32f5e1e ("net: ethernet: Add a driver for Gemini gigabit ethernet") Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Wang Hai <wanghai38@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-31ionic: unlock queue mutex in error pathShannon Nelson1-1/+3
On an error return, jump to the unlock at the end to be sure to unlock the queue_lock mutex. Fixes: 0925e9db4dc8 ("ionic: use mutex to protect queue operations") Reported-by: kernel test robot <lkp@intel.com> Reported-by: Julia Lawall <julia.lawall@lip6.fr> Signed-off-by: Shannon Nelson <snelson@pensando.io> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-31atm: fix atm_dev refcnt leaks in atmtcp_remove_persistentXin Xiong1-2/+8
atmtcp_remove_persistent() invokes atm_dev_lookup(), which returns a reference of atm_dev with increased refcount or NULL if fails. The refcount leaks issues occur in two error handling paths. If dev_data->persist is zero or PRIV(dev)->vcc isn't NULL, the function returns 0 without decreasing the refcount kept by a local variable, resulting in refcount leaks. Fix the issue by adding atm_dev_put() before returning 0 both when dev_data->persist is zero or PRIV(dev)->vcc isn't NULL. Signed-off-by: Xin Xiong <xiongx18@fudan.edu.cn> Signed-off-by: Xiyu Yang <xiyuyang19@fudan.edu.cn> Signed-off-by: Xin Tan <tanxin.ctf@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-31net: ethernet: mtk_eth_soc: fix MTU warningsLanden Chao1-0/+2
in recent kernel versions there are warnings about incorrect MTU size like these: eth0: mtu greater than device maximum mtk_soc_eth 1b100000.ethernet eth0: error -22 setting MTU to include DSA overhead Fixes: bfcb813203e6 ("net: dsa: configure the MTU for switch ports") Fixes: 72579e14a1d3 ("net: dsa: don't fail to probe if we couldn't set the MTU") Fixes: 7a4c53bee332 ("net: report invalid mtu value via netlink extack") Signed-off-by: Landen Chao <landen.chao@mediatek.com> Signed-off-by: Frank Wunderlich <frank-w@public-files.de> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-31net: nixge: fix potential memory leak in nixge_probe()Lu Wei1-3/+5
If some processes in nixge_probe() fail, free_netdev(dev) needs to be called to aviod a memory leak. Fixes: 87ab207981ec ("net: nixge: Separate ctrl and dma resources") Fixes: abcd3d6fc640 ("net: nixge: Fix error path for obtaining mac address") Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Lu Wei <luwei32@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-31devlink: ignore -EOPNOTSUPP errors on dumpitJakub Kicinski1-6/+18
Number of .dumpit functions try to ignore -EOPNOTSUPP errors. Recent change missed that, and started reporting all errors but -EMSGSIZE back from dumps. This leads to situation like this: $ devlink dev info devlink answers: Operation not supported Dump should not report an error just because the last device to be queried could not provide an answer. To fix this and avoid similar confusion make sure we clear err properly, and not leave it set to an error if we don't terminate the iteration. Fixes: c62c2cfb801b ("net: devlink: don't ignore errors during dumpit") Signed-off-by: Jakub Kicinski <kuba@kernel.org> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-31rxrpc: Fix race between recvmsg and sendmsg on immediate call failureDavid Howells4-12/+28
There's a race between rxrpc_sendmsg setting up a call, but then failing to send anything on it due to an error, and recvmsg() seeing the call completion occur and trying to return the state to the user. An assertion fails in rxrpc_recvmsg() because the call has already been released from the socket and is about to be released again as recvmsg deals with it. (The recvmsg_q queue on the socket holds a ref, so there's no problem with use-after-free.) We also have to be careful not to end up reporting an error twice, in such a way that both returns indicate to userspace that the user ID supplied with the call is no longer in use - which could cause the client to malfunction if it recycles the user ID fast enough. Fix this by the following means: (1) When sendmsg() creates a call after the point that the call has been successfully added to the socket, don't return any errors through sendmsg(), but rather complete the call and let recvmsg() retrieve them. Make sendmsg() return 0 at this point. Further calls to sendmsg() for that call will fail with ESHUTDOWN. Note that at this point, we haven't send any packets yet, so the server doesn't yet know about the call. (2) If sendmsg() returns an error when it was expected to create a new call, it means that the user ID wasn't used. (3) Mark the call disconnected before marking it completed to prevent an oops in rxrpc_release_call(). (4) recvmsg() will then retrieve the error and set MSG_EOR to indicate that the user ID is no longer known by the kernel. An oops like the following is produced: kernel BUG at net/rxrpc/recvmsg.c:605! ... RIP: 0010:rxrpc_recvmsg+0x256/0x5ae ... Call Trace: ? __init_waitqueue_head+0x2f/0x2f ____sys_recvmsg+0x8a/0x148 ? import_iovec+0x69/0x9c ? copy_msghdr_from_user+0x5c/0x86 ___sys_recvmsg+0x72/0xaa ? __fget_files+0x22/0x57 ? __fget_light+0x46/0x51 ? fdget+0x9/0x1b do_recvmmsg+0x15e/0x232 ? _raw_spin_unlock+0xa/0xb ? vtime_delta+0xf/0x25 __x64_sys_recvmmsg+0x2c/0x2f do_syscall_64+0x4c/0x78 entry_SYSCALL_64_after_hwframe+0x44/0xa9 Fixes: 357f5ef64628 ("rxrpc: Call rxrpc_release_call() on error in rxrpc_new_client_call()") Reported-by: syzbot+b54969381df354936d96@syzkaller.appspotmail.com Signed-off-by: David Howells <dhowells@redhat.com> Reviewed-by: Marc Dionne <marc.dionne@auristor.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-31MAINTAINERS: Replace Thor Thayer as Altera Triple Speed Ethernet maintainerJoyce Ooi1-1/+1
This patch is to replace Thor Thayer as Altera Triple Speed Ethernet maintainer as he is moving to a different role. Signed-off-by: Joyce Ooi <joyce.ooi@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-31selftests/bpf: fix netdevsim trap_flow_action_cookie readHangbin Liu1-0/+3
When read netdevsim trap_flow_action_cookie, we need to init it first, or we will get "Invalid argument" error. Fixes: d3cbb907ae57 ("netdevsim: add ACL trap reporting cookie as a metadata") Signed-off-by: Hangbin Liu <liuhangbin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-31ipv6: fix memory leaks on IPV6_ADDRFORM pathCong Wang3-5/+14
IPV6_ADDRFORM causes resource leaks when converting an IPv6 socket to IPv4, particularly struct ipv6_ac_socklist. Similar to struct ipv6_mc_socklist, we should just close it on this path. This bug can be easily reproduced with the following C program: #include <stdio.h> #include <string.h> #include <sys/types.h> #include <sys/socket.h> #include <arpa/inet.h> int main() { int s, value; struct sockaddr_in6 addr; struct ipv6_mreq m6; s = socket(AF_INET6, SOCK_DGRAM, 0); addr.sin6_family = AF_INET6; addr.sin6_port = htons(5000); inet_pton(AF_INET6, "::ffff:192.168.122.194", &addr.sin6_addr); connect(s, (struct sockaddr *)&addr, sizeof(addr)); inet_pton(AF_INET6, "fe80::AAAA", &m6.ipv6mr_multiaddr); m6.ipv6mr_interface = 5; setsockopt(s, SOL_IPV6, IPV6_JOIN_ANYCAST, &m6, sizeof(m6)); value = AF_INET; setsockopt(s, SOL_IPV6, IPV6_ADDRFORM, &value, sizeof(value)); close(s); return 0; } Reported-by: ch3332xr@gmail.com Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-31net/bpfilter: Initialize pos in __bpfilter_process_sockoptChristoph Hellwig1-1/+1
__bpfilter_process_sockopt never initialized the pos variable passed to the pipe write. This has been mostly harmless in the past as pipes ignore the offset, but the switch to kernel_write now verified the position, which can lead to a failure depending on the exact stack initialization pattern. Initialize the variable to zero to make rw_verify_area happy. Fixes: 6955a76fbcd5 ("bpfilter: switch to kernel_write") Reported-by: Christian Brauner <christian.brauner@ubuntu.com> Reported-by: Rodrigo Madera <rodrigo.madera@gmail.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Tested-by: Rodrigo Madera <rodrigo.madera@gmail.com> Tested-by: Christian Brauner <christian.brauner@ubuntu.com> Reviewed-by: Christian Brauner <christian.brauner@ubuntu.com> Link: https://lore.kernel.org/bpf/20200730160900.187157-1-hch@lst.de
2020-07-31Merge tag 'kvmarm-fixes-5.8-4' of ↵Paolo Bonzini2-8/+14
git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into kvm-master KVM/arm64 fixes for Linux 5.8, take #3 - Fix a corner case of a new mapping inheriting exec permission without and yet bypassing invalidation of the I-cache - Make sure PtrAuth predicates oinly generate inline code for the non-VHE hypervisor code
2020-07-30Bluetooth: fix kernel oops in store_pending_adv_reportAlain Michaud1-7/+19
Fix kernel oops observed when an ext adv data is larger than 31 bytes. This can be reproduced by setting up an advertiser with advertisement larger than 31 bytes. The issue is not sensitive to the advertisement content. In particular, this was reproduced with an advertisement of 229 bytes filled with 'A'. See stack trace below. This is fixed by not catching ext_adv as legacy adv are only cached to be able to concatenate a scanable adv with its scan response before sending it up through mgmt. With ext_adv, this is no longer necessary. general protection fault: 0000 [#1] SMP PTI CPU: 6 PID: 205 Comm: kworker/u17:0 Not tainted 5.4.0-37-generic #41-Ubuntu Hardware name: Dell Inc. XPS 15 7590/0CF6RR, BIOS 1.7.0 05/11/2020 Workqueue: hci0 hci_rx_work [bluetooth] RIP: 0010:hci_bdaddr_list_lookup+0x1e/0x40 [bluetooth] Code: ff ff e9 26 ff ff ff 0f 1f 44 00 00 0f 1f 44 00 00 55 48 8b 07 48 89 e5 48 39 c7 75 0a eb 24 48 8b 00 48 39 f8 74 1c 44 8b 06 <44> 39 40 10 75 ef 44 0f b7 4e 04 66 44 39 48 14 75 e3 38 50 16 75 RSP: 0018:ffffbc6a40493c70 EFLAGS: 00010286 RAX: 4141414141414141 RBX: 000000000000001b RCX: 0000000000000000 RDX: 0000000000000000 RSI: ffff9903e76c100f RDI: ffff9904289d4b28 RBP: ffffbc6a40493c70 R08: 0000000093570362 R09: 0000000000000000 R10: 0000000000000000 R11: ffff9904344eae38 R12: ffff9904289d4000 R13: 0000000000000000 R14: 00000000ffffffa3 R15: ffff9903e76c100f FS: 0000000000000000(0000) GS:ffff990434580000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007feed125a000 CR3: 00000001b860a003 CR4: 00000000003606e0 Call Trace: process_adv_report+0x12e/0x560 [bluetooth] hci_le_meta_evt+0x7b2/0xba0 [bluetooth] hci_event_packet+0x1c29/0x2a90 [bluetooth] hci_rx_work+0x19b/0x360 [bluetooth] process_one_work+0x1eb/0x3b0 worker_thread+0x4d/0x400 kthread+0x104/0x140 Fixes: c215e9397b00 ("Bluetooth: Process extended ADV report event") Reported-by: Andy Nguyen <theflow@google.com> Reported-by: Linus Torvalds <torvalds@linux-foundation.org> Reported-by: Balakrishna Godavarthi <bgodavar@codeaurora.org> Signed-off-by: Alain Michaud <alainm@chromium.org> Tested-by: Sonny Sasaka <sonnysasaka@chromium.org> Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-07-30Merge tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhostLinus Torvalds4-6/+16
Pull virtio fixes from Michael Tsirkin: "A couple of last minute bugfixes" * tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost: virtio-mem: Fix build error due to improper use 'select' virtio_balloon: fix up endian-ness for free cmd id virtio-balloon: Document byte ordering of poison_val vhost/scsi: fix up req type endian-ness firmware: Fix a reference count leak.
2020-07-30ARM: percpu.h: fix build errorGrygorii Strashko1-0/+2
Fix build error for the case: defined(CONFIG_SMP) && !defined(CONFIG_CPU_V6) config: keystone_defconfig CC arch/arm/kernel/signal.o In file included from ../include/linux/random.h:14, from ../arch/arm/kernel/signal.c:8: ../arch/arm/include/asm/percpu.h: In function ‘__my_cpu_offset’: ../arch/arm/include/asm/percpu.h:29:34: error: ‘current_stack_pointer’ undeclared (first use in this function); did you mean ‘user_stack_pointer’? : "Q" (*(const unsigned long *)current_stack_pointer)); ^~~~~~~~~~~~~~~~~~~~~ user_stack_pointer Fixes: f227e3ec3b5c ("random32: update the net random state on interrupt and activity") Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-07-30Merge tag 'pci-v5.8-fixes-3' of ↵Linus Torvalds1-0/+13
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci Pull PCI fix from Bjorn Helgaas: "Disable ASPM on ASM1083/1085 PCIe-to-PCI bridge (Robert Hancock)" * tag 'pci-v5.8-fixes-3' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: PCI/ASPM: Disable ASPM on ASMedia ASM1083/1085 PCIe-to-PCI bridge
2020-07-30igb: reinit_locked() should be called with rtnl_lockFrancesco Ruggeri1-0/+9
We observed two panics involving races with igb_reset_task. The first panic is caused by this race condition: kworker reboot -f igb_reset_task igb_reinit_locked igb_down napi_synchronize __igb_shutdown igb_clear_interrupt_scheme igb_free_q_vectors igb_free_q_vector adapter->q_vector[v_idx] = NULL; napi_disable Panics trying to access adapter->q_vector[v_idx].napi_state The second panic (a divide error) is caused by this race: kworker reboot -f tx packet igb_reset_task __igb_shutdown rtnl_lock() ... igb_clear_interrupt_scheme igb_free_q_vectors adapter->num_tx_queues = 0 ... rtnl_unlock() rtnl_lock() igb_reinit_locked igb_down igb_up netif_tx_start_all_queues dev_hard_start_xmit igb_xmit_frame igb_tx_queue_mapping Panics on r_idx % adapter->num_tx_queues This commit applies to igb_reset_task the same changes that were applied to ixgbe in commit 2f90b8657ec9 ("ixgbe: this patch adds support for DCB to the kernel and ixgbe driver"), commit 8f4c5c9fb87a ("ixgbe: reinit_locked() should be called with rtnl_lock") and commit 88adce4ea8f9 ("ixgbe: fix possible race in reset subtask"). Signed-off-by: Francesco Ruggeri <fruggeri@arista.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2020-07-30e1000e: continue to init PHY even when failed to disable ULPAaron Ma1-3/+1
After 'commit e086ba2fccda4 ("e1000e: disable s0ix entry and exit flows for ME systems")', ThinkPad P14s always failed to disable ULP by ME. 'commit 0c80cdbf3320 ("e1000e: Warn if disabling ULP failed")' break out of init phy: error log: [ 42.364753] e1000e 0000:00:1f.6 enp0s31f6: Failed to disable ULP [ 42.524626] e1000e 0000:00:1f.6 enp0s31f6: PHY Wakeup cause - Unicast Packet [ 42.822476] e1000e 0000:00:1f.6 enp0s31f6: Hardware Error When disable s0ix, E1000_FWSM_ULP_CFG_DONE will never be 1. If continue to init phy like before, it can work as before. iperf test result good too. Fixes: 0c80cdbf3320 ("e1000e: Warn if disabling ULP failed") Signed-off-by: Aaron Ma <aaron.ma@canonical.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2020-07-30Merge tag 'block-5.8-2020-07-30' of git://git.kernel.dk/linux-blockLinus Torvalds4-12/+17
Pull block fixes from Jens Axboe: "Three NVMe fixes" * tag 'block-5.8-2020-07-30' of git://git.kernel.dk/linux-block: nvme: add a Identify Namespace Identification Descriptor list quirk nvme-pci: prevent SK hynix PC400 from using Write Zeroes command nvme-tcp: fix possible hang waiting for icresp response
2020-07-30Merge tag 'io_uring-5.8-2020-07-30' of git://git.kernel.dk/linux-blockLinus Torvalds1-2/+5
Pull io_uring fixes from Jens Axboe: "Two small fixes for corner/error cases" * tag 'io_uring-5.8-2020-07-30' of git://git.kernel.dk/linux-block: io_uring: fix lockup in io_fail_links() io_uring: fix ->work corruption with poll_add
2020-07-30random: fix circular include dependency on arm64 after addition of percpu.hWilly Tarreau1-1/+1
Daniel Díaz and Kees Cook independently reported that commit f227e3ec3b5c ("random32: update the net random state on interrupt and activity") broke arm64 due to a circular dependency on include files since the addition of percpu.h in random.h. The correct fix would definitely be to move all the prandom32 stuff out of random.h but for backporting, a smaller solution is preferred. This one replaces linux/percpu.h with asm/percpu.h, and this fixes the problem on x86_64, arm64, arm, and mips. Note that moving percpu.h around didn't change anything and that removing it entirely broke differently. When backporting, such options might still be considered if this patch fails to help. [ It turns out that an alternate fix seems to be to just remove the troublesome <asm/pointer_auth.h> remove from the arm64 <asm/smp.h> that causes the circular dependency. But we might as well do the whole belt-and-suspenders thing, and minimize inclusion in <linux/random.h> too. Either will fix the problem, and both are good changes. - Linus ] Reported-by: Daniel Díaz <daniel.diaz@linaro.org> Reported-by: Kees Cook <keescook@chromium.org> Tested-by: Marc Zyngier <maz@kernel.org> Fixes: f227e3ec3b5c Cc: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Willy Tarreau <w@1wt.eu> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-07-30MAINTAINERS: Include drivers subdirs for ARM PMU PROFILING AND DEBUGGING entryJohn Garry1-1/+1
Ensure that the ARM PMU PROFILING AND DEBUGGING maintainers are included for the HiSilicon PMU driver. Signed-off-by: John Garry <john.garry@huawei.com> Link: https://lore.kernel.org/r/1592392648-128331-1-git-send-email-john.garry@huawei.com Signed-off-by: Will Deacon <will@kernel.org>
2020-07-30arm64: csum: Fix handling of bad packetsRobin Murphy1-2/+3
Although iph is expected to point to at least 20 bytes of valid memory, ihl may be bogus, for example on reception of a corrupt packet. If it happens to be less than 5, we really don't want to run away and dereference 16GB worth of memory until it wraps back to exactly zero... Fixes: 0e455d8e80aa ("arm64: Implement optimised IP checksum helpers") Reported-by: guodeqing <geffrey.guo@huawei.com> Signed-off-by: Robin Murphy <robin.murphy@arm.com> Signed-off-by: Will Deacon <will@kernel.org>
2020-07-30arm64: Drop unnecessary include from asm/smp.hMarc Zyngier1-1/+0
asm/pointer_auth.h is not needed anymore in asm/smp.h, as 62a679cb2825 ("arm64: simplify ptrauth initialization") removed the keys from the secondary_data structure. This also cures a compilation issue introduced by f227e3ec3b5c ("random32: update the net random state on interrupt and activity"). Fixes: 62a679cb2825 ("arm64: simplify ptrauth initialization") Fixes: f227e3ec3b5c ("random32: update the net random state on interrupt and activity") Acked-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Marc Zyngier <maz@kernel.org> Signed-off-by: Will Deacon <will@kernel.org>
2020-07-30arm64/alternatives: move length validation inside the subsectionSami Tolvanen1-2/+2
Commit f7b93d42945c ("arm64/alternatives: use subsections for replacement sequences") breaks LLVM's integrated assembler, because due to its one-pass design, it cannot compute instruction sequence lengths before the layout for the subsection has been finalized. This change fixes the build by moving the .org directives inside the subsection, so they are processed after the subsection layout is known. Fixes: f7b93d42945c ("arm64/alternatives: use subsections for replacement sequences") Signed-off-by: Sami Tolvanen <samitolvanen@google.com> Link: https://github.com/ClangBuiltLinux/linux/issues/1078 Link: https://lore.kernel.org/r/20200730153701.3892953-1-samitolvanen@google.com Signed-off-by: Will Deacon <will@kernel.org>
2020-07-30virtio-mem: Fix build error due to improper use 'select'Weilong Chen1-1/+1
As noted in: https://www.kernel.org/doc/Documentation/kbuild/kconfig-language.txt "select should be used with care. select will force a symbol to a value without visiting the dependencies." Config VIRTIO_MEM should not select CONTIG_ALLOC directly. Otherwise it will cause an error: https://bugzilla.kernel.org/show_bug.cgi?id=208245 Signed-off-by: Weilong Chen <chenweilong@huawei.com> Link: https://lore.kernel.org/r/20200619080333.194753-1-chenweilong@huawei.com Acked-by: Randy Dunlap <rdunlap@infradead.org> # build-tested Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Acked-by: Jason Wang <jasowang@redhat.com> Acked-by: David Hildenbrand <david@redhat.com>
2020-07-30Revert "drm/amdgpu: Fix NULL dereference in dpm sysfs handlers"Alex Deucher1-3/+6
This regressed some working configurations so revert it. Will fix this properly for 5.9 and backport then. This reverts commit 38e0c89a19fd13f28d2b4721035160a3e66e270b. Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2020-07-30drm/amd/display: Clear dm_state for fast updatesMazin Rezk1-9/+27
This patch fixes a race condition that causes a use-after-free during amdgpu_dm_atomic_commit_tail. This can occur when 2 non-blocking commits are requested and the second one finishes before the first. Essentially, this bug occurs when the following sequence of events happens: 1. Non-blocking commit #1 is requested w/ a new dm_state #1 and is deferred to the workqueue. 2. Non-blocking commit #2 is requested w/ a new dm_state #2 and is deferred to the workqueue. 3. Commit #2 starts before commit #1, dm_state #1 is used in the commit_tail and commit #2 completes, freeing dm_state #1. 4. Commit #1 starts after commit #2 completes, uses the freed dm_state 1 and dereferences a freelist pointer while setting the context. Since this bug has only been spotted with fast commits, this patch fixes the bug by clearing the dm_state instead of using the old dc_state for fast updates. In addition, since dm_state is only used for its dc_state and amdgpu_dm_atomic_commit_tail will retain the dc_state if none is found, removing the dm_state should not have any consequences in fast updates. This use-after-free bug has existed for a while now, but only caused a noticeable issue starting from 5.7-rc1 due to 3202fa62f ("slub: relocate freelist pointer to middle of object") moving the freelist pointer from dm_state->base (which was unused) to dm_state->context (which is dereferenced). Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=207383 Fixes: bd200d190f45 ("drm/amd/display: Don't replace the dc_state for fast updates") Reported-by: Duncan <1i5t5.duncan@cox.net> Signed-off-by: Mazin Rezk <mnrzk@protonmail.com> Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2020-07-30drm/amdgpu: Prevent kernel-infoleak in amdgpu_info_ioctl()Peilin Ye1-1/+2
Compiler leaves a 4-byte hole near the end of `dev_info`, causing amdgpu_info_ioctl() to copy uninitialized kernel stack memory to userspace when `size` is greater than 356. In 2015 we tried to fix this issue by doing `= {};` on `dev_info`, which unfortunately does not initialize that 4-byte hole. Fix it by using memset() instead. Cc: stable@vger.kernel.org Fixes: c193fa91b918 ("drm/amdgpu: information leak in amdgpu_info_ioctl()") Fixes: d38ceaf99ed0 ("drm/amdgpu: add core driver (v4)") Suggested-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Peilin Ye <yepeilin.cs@gmail.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-07-30RDMA/core: Free DIM memory in error unwindLeon Romanovsky1-0/+1
The memory allocated for the DIM wasn't freed in in error unwind path, fix it by calling to rdma_dim_destroy(). Fixes: da6629793aa6 ("RDMA/core: Provide RDMA DIM support for ULPs") Link: https://lore.kernel.org/r/20200730082719.1582397-4-leon@kernel.org Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Reviewed-by: Max Gurtovoy <maxg@mellanox.com <mailto:maxg@mellanox.com>> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2020-07-30RDMA/core: Stop DIM before destroying CQLeon Romanovsky1-3/+10
HW destroy operation should be last operation after all possible CQ users completed their work, so move DIM work cancellation before such destroy call. Fixes: da6629793aa6 ("RDMA/core: Provide RDMA DIM support for ULPs") Link: https://lore.kernel.org/r/20200730082719.1582397-3-leon@kernel.org Reviewed-by: Max Gurtovoy <maxg@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2020-07-30RDMA/mlx5: Initialize QP mutex for the debug kernelsLeon Romanovsky1-4/+1
In DCT and RSS RAW QP creation flows, the QP mutex wasn't initialized and the magic field inside lock was missing. This caused to the following kernel warning for kernels build with CONFIG_DEBUG_MUTEXES. DEBUG_LOCKS_WARN_ON(lock->magic != lock) WARNING: CPU: 3 PID: 16261 at kernel/locking/mutex.c:938 __mutex_lock+0x60e/0x940 Modules linked in: bonding nf_tables ipip tunnel4 geneve ip6_udp_tunnel udp_tunnel ip6_gre ip6_tunnel tunnel6 ip_gre gre ip_tunnel mlx5_ib mlx5_core mlxfw ptp pps_core rdma_ucm ib_uverbs ib_ipoib ib_umad openvswitch nsh xt_MASQUERADE nf_conntrack_netlink nfnetlink iptable_nat xt_addrtype xt_conntrack nf_nat nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 br_netfilter overlay ib_srp scsi_transport_srp rpcrdma ib_iser libiscsi scsi_transport_iscsi rdma_cm iw_cm ib_cm ib_core [last unloaded: mlxfw] CPU: 3 PID: 16261 Comm: ib_send_bw Not tainted 5.8.0-rc4_for_upstream_min_debug_2020_07_08_22_04 #1 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.12.1-0-ga5cab58e9a3f-prebuilt.qemu.org 04/01/2014 RIP: 0010:__mutex_lock+0x60e/0x940 Code: c0 0f 84 6d fa ff ff 44 8b 15 4e 9d ba 00 45 85 d2 0f 85 5d fa ff ff 48 c7 c6 f2 de 2b 82 48 c7 c7 f1 8a 2b 82 e8 d2 4d 72 ff <0f> 0b 4c 8b 4d 88 e9 3f fa ff ff f6 c2 04 0f 84 37 fe ff ff 48 89 RSP: 0018:ffff88810bb8b870 EFLAGS: 00010286 RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000000 RDX: ffff88829f1dd880 RSI: 0000000000000000 RDI: ffffffff81192afa RBP: ffff88810bb8b910 R08: 0000000000000000 R09: 0000000000000028 R10: 0000000000000000 R11: 0000000000003f85 R12: 0000000000000002 R13: ffff88827d8d3ce0 R14: ffffffffa059f615 R15: ffff8882a4d02610 FS: 00007f3f6988e740(0000) GS:ffff8882f5b80000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000556556158000 CR3: 000000010a63c005 CR4: 0000000000360ea0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: ? cmd_exec+0x947/0xe60 [mlx5_core] ? __mutex_lock+0x76/0x940 ? mlx5_ib_qp_set_counter+0x25/0xa0 [mlx5_ib] mlx5_ib_qp_set_counter+0x25/0xa0 [mlx5_ib] mlx5_ib_counter_bind_qp+0x9b/0xe0 [mlx5_ib] __rdma_counter_bind_qp+0x6b/0xa0 [ib_core] rdma_counter_bind_qp_auto+0x363/0x520 [ib_core] _ib_modify_qp+0x316/0x580 [ib_core] ib_modify_qp_with_udata+0x19/0x30 [ib_core] modify_qp+0x4c4/0x600 [ib_uverbs] ib_uverbs_ex_modify_qp+0x87/0xe0 [ib_uverbs] ib_uverbs_handler_UVERBS_METHOD_INVOKE_WRITE+0x129/0x1c0 [ib_uverbs] ib_uverbs_cmd_verbs.isra.5+0x5d5/0x11f0 [ib_uverbs] ? ib_uverbs_handler_UVERBS_METHOD_QUERY_CONTEXT+0x120/0x120 [ib_uverbs] ? lock_acquire+0xb9/0x3a0 ? ib_uverbs_ioctl+0xd0/0x210 [ib_uverbs] ? ib_uverbs_ioctl+0x175/0x210 [ib_uverbs] ib_uverbs_ioctl+0x14b/0x210 [ib_uverbs] ? ib_uverbs_ioctl+0xd0/0x210 [ib_uverbs] ksys_ioctl+0x234/0x7d0 ? exc_page_fault+0x202/0x640 ? do_syscall_64+0x1f/0x2e0 __x64_sys_ioctl+0x16/0x20 do_syscall_64+0x59/0x2e0 ? asm_exc_page_fault+0x8/0x30 ? rcu_read_lock_sched_held+0x52/0x60 entry_SYSCALL_64_after_hwframe+0x44/0xa9 Fixes: b4aaa1f0b415 ("IB/mlx5: Handle type IB_QPT_DRIVER when creating a QP") Link: https://lore.kernel.org/r/20200730082719.1582397-2-leon@kernel.org Reviewed-by: Maor Gottlieb <maorg@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2020-07-30mac80211: remove STA txq pending airtime underflow warningFelix Fietkau1-3/+1
This warning can trigger if there is a mismatch between frames that were sent with the sta pointer set vs tx status frames reported for the sta address. This can happen due to race conditions on re-creating stations, or even in the case of .sta_add/remove being used instead of .sta_state, which can cause frames to be sent to a station that has not been uploaded yet. If there is an actual underflow issue, it should show up in the device airtime warning below, so it is better to remove this one. Signed-off-by: Felix Fietkau <nbd@nbd.name> Link: https://lore.kernel.org/r/20200725084533.13829-1-nbd@nbd.name Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-07-30mac80211: Fix bug in Tx ack status reporting in 802.3 xmit pathVasanthakumar Thiagarajan1-3/+4
Allocated ack_frame id from local->ack_status_frames is not really stored in the tx_info for 802.3 Tx path. Due to this, tx ack status is not reported and ack_frame id is not freed for the buffers requiring tx ack status. Also move the memset to 0 of tx_info before IEEE80211_TX_CTL_REQ_TX_STATUS flag assignment. Fixes: 50ff477a8639 ("mac80211: add 802.11 encapsulation offloading support") Signed-off-by: Vasanthakumar Thiagarajan <vthiagar@codeaurora.org> Link: https://lore.kernel.org/r/1595427617-1713-1-git-send-email-vthiagar@codeaurora.org Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-07-30cfg80211: check vendor command doit pointer before useJulian Squires1-3/+3
In the case where a vendor command does not implement doit, and has no flags set, doit would not be validated and a NULL pointer dereference would occur, for example when invoking the vendor command via iw. I encountered this while developing new vendor commands. Perhaps in practice it is advisable to always implement doit along with dumpit, but it seems reasonable to me to always check doit anyway, not just when NEED_WDEV. Signed-off-by: Julian Squires <julian@cipht.net> Link: https://lore.kernel.org/r/20200706211353.2366470-1-julian@cipht.net Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-07-30mac80211: mesh: Free pending skb when destroying a mpathRemi Pommarel1-0/+1
A mpath object can hold reference on a list of skb that are waiting for mpath resolution to be sent. When destroying a mpath this skb list should be cleaned up in order to not leak memory. Fixing that kind of leak: unreferenced object 0xffff0000181c9300 (size 1088): comm "openvpn", pid 1782, jiffies 4295071698 (age 80.416s) hex dump (first 32 bytes): 00 00 00 00 00 00 00 00 f9 80 36 00 00 00 00 00 ..........6..... 02 00 07 40 00 00 00 00 00 00 00 00 00 00 00 00 ...@............ backtrace: [<000000004bc6a443>] kmem_cache_alloc+0x1a4/0x2f0 [<000000002caaef13>] sk_prot_alloc.isra.39+0x34/0x178 [<00000000ceeaa916>] sk_alloc+0x34/0x228 [<00000000ca1f1d04>] inet_create+0x198/0x518 [<0000000035626b1c>] __sock_create+0x134/0x328 [<00000000a12b3a87>] __sys_socket+0xb0/0x158 [<00000000ff859f23>] __arm64_sys_socket+0x40/0x58 [<00000000263486ec>] el0_svc_handler+0xd0/0x1a0 [<0000000005b5157d>] el0_svc+0x8/0xc unreferenced object 0xffff000012973a40 (size 216): comm "openvpn", pid 1782, jiffies 4295082137 (age 38.660s) hex dump (first 32 bytes): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 00 c0 06 16 00 00 ff ff 00 93 1c 18 00 00 ff ff ................ backtrace: [<000000004bc6a443>] kmem_cache_alloc+0x1a4/0x2f0 [<0000000023c8c8f9>] __alloc_skb+0xc0/0x2b8 [<000000007ad950bb>] alloc_skb_with_frags+0x60/0x320 [<00000000ef90023a>] sock_alloc_send_pskb+0x388/0x3c0 [<00000000104fb1a3>] sock_alloc_send_skb+0x1c/0x28 [<000000006919d2dd>] __ip_append_data+0xba4/0x11f0 [<0000000083477587>] ip_make_skb+0x14c/0x1a8 [<0000000024f3d592>] udp_sendmsg+0xaf0/0xcf0 [<000000005aabe255>] inet_sendmsg+0x5c/0x80 [<000000008651ea08>] __sys_sendto+0x15c/0x218 [<000000003505c99b>] __arm64_sys_sendto+0x74/0x90 [<00000000263486ec>] el0_svc_handler+0xd0/0x1a0 [<0000000005b5157d>] el0_svc+0x8/0xc Fixes: 2bdaf386f99c (mac80211: mesh: move path tables into if_mesh) Signed-off-by: Remi Pommarel <repk@triplefau.lt> Link: https://lore.kernel.org/r/20200704135419.27703-1-repk@triplefau.lt Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-07-30mac80211: mesh: Free ie data when leaving meshRemi Pommarel1-0/+1
At ieee80211_join_mesh() some ie data could have been allocated (see copy_mesh_setup()) and need to be cleaned up when leaving the mesh. This fixes the following kmemleak report: unreferenced object 0xffff0000116bc600 (size 128): comm "wpa_supplicant", pid 608, jiffies 4294898983 (age 293.484s) hex dump (first 32 bytes): 30 14 01 00 00 0f ac 04 01 00 00 0f ac 04 01 00 0............... 00 0f ac 08 00 00 00 00 c4 65 40 00 00 00 00 00 .........e@..... backtrace: [<00000000bebe439d>] __kmalloc_track_caller+0x1c0/0x330 [<00000000a349dbe1>] kmemdup+0x28/0x50 [<0000000075d69baa>] ieee80211_join_mesh+0x6c/0x3b8 [mac80211] [<00000000683bb98b>] __cfg80211_join_mesh+0x1e8/0x4f0 [cfg80211] [<0000000072cb507f>] nl80211_join_mesh+0x520/0x6b8 [cfg80211] [<0000000077e9bcf9>] genl_family_rcv_msg+0x374/0x680 [<00000000b1bd936d>] genl_rcv_msg+0x78/0x108 [<0000000022c53788>] netlink_rcv_skb+0xb0/0x1c0 [<0000000011af8ec9>] genl_rcv+0x34/0x48 [<0000000069e41f53>] netlink_unicast+0x268/0x2e8 [<00000000a7517316>] netlink_sendmsg+0x320/0x4c0 [<0000000069cba205>] ____sys_sendmsg+0x354/0x3a0 [<00000000e06bab0f>] ___sys_sendmsg+0xd8/0x120 [<0000000037340728>] __sys_sendmsg+0xa4/0xf8 [<000000004fed9776>] __arm64_sys_sendmsg+0x44/0x58 [<000000001c1e5647>] el0_svc_handler+0xd0/0x1a0 Fixes: c80d545da3f7 (mac80211: Let userspace enable and configure vendor specific path selection.) Signed-off-by: Remi Pommarel <repk@triplefau.lt> Link: https://lore.kernel.org/r/20200704135007.27292-1-repk@triplefau.lt Signed-off-by: Johannes Berg <johannes.berg@intel.com>
generated by cgit v1.2.3 (git 2.39.0) at 2024-10-07 12:47:06 +0300