summaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2023-04-19Merge tag 'spi-fix-v6.3-rc7' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi Pull spi fix from Mark Brown: "A small fix in the error handling for the rockchip driver, ensuring we don't leak clock enables if we fail to request the interrupt for the device" * tag 'spi-fix-v6.3-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: spi: spi-rockchip: Fix missing unwind goto in rockchip_sfc_probe()
2023-04-19Merge tag 'regulator-fix-v6.3-rc7' of ↵Linus Torvalds2-6/+9
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator Pull regulator fixes from Mark Brown: "A few driver specific fixes, one build coverage issue and a couple of 'someone typed in the wrong number' style errors in describing devices to the subsystem" * tag 'regulator-fix-v6.3-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator: regulator: sm5703: Fix missing n_voltages for fixed regulators regulator: fan53555: Fix wrong TCS_SLEW_MASK regulator: fan53555: Explicitly include bits header
2023-04-19net: dsa: microchip: ksz8795: Correctly handle huge frame configurationChristophe JAILLET1-1/+1
Because of the logic in place, SW_HUGE_PACKET can never be set. (If the first condition is true, then the 2nd one is also true, but is not executed) Change the logic and update each bit individually. Fixes: 29d1e85f45e0 ("net: dsa: microchip: ksz8: add MTU configuration support") Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Reviewed-by: Oleksij Rempel <o.rempel@pengutronix.de> Reviewed-by: Simon Horman <simon.horman@corigine.com> Reviewed-by: Vladimir Oltean <olteanv@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Link: https://lore.kernel.org/r/43107d9e8b5b8b05f0cbd4e1f47a2bb88c8747b2.1681755535.git.christophe.jaillet@wanadoo.fr Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-04-19rust: allow to use INIT_STACK_ALL_ZEROAndrea Righi1-0/+14
With CONFIG_INIT_STACK_ALL_ZERO enabled, bindgen passes -ftrivial-auto-var-init=zero to clang, that triggers the following error: error: '-ftrivial-auto-var-init=zero' hasn't been enabled; enable it at your own peril for benchmarking purpose only with '-enable-trivial-auto-var-init-zero-knowing-it-will-be-removed-from-clang' However, this additional option that is currently required by clang is deprecated since clang-16 and going to be removed in the future, likely with clang-18. So, make sure bindgen is using this extra option if the major version of the libclang used by bindgen is < 16. In this way we can enable CONFIG_INIT_STACK_ALL_ZERO with CONFIG_RUST without triggering any build error. Link: https://github.com/llvm/llvm-project/issues/44842 Link: https://github.com/llvm/llvm-project/blob/llvmorg-16.0.0-rc2/clang/docs/ReleaseNotes.rst#deprecated-compiler-flags Signed-off-by: Andrea Righi <andrea.righi@canonical.com> Reviewed-by: Kees Cook <keescook@chromium.org> [Changed to < 16, added link and reworded] Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
2023-04-19rust: fix regexp in scripts/is_rust_module.shAndrea Righi1-1/+1
nm can use "R" or "r" to show read-only data sections, but scripts/is_rust_module.sh can only recognize "r", so with some versions of binutils it can fail to detect if a module is a Rust module or not. Right now we're using this script only to determine if we need to skip BTF generation (that is disabled globally if CONFIG_RUST is enabled), but it's still nice to fix this script to do the proper job. Moreover, with this patch applied I can also relax the constraint of "RUST depends on !DEBUG_INFO_BTF" and build a kernel with Rust and BTF enabled at the same time (of course BTF generation is still skipped for Rust modules). [ Miguel: The actual reason is likely to be a change on the Rust compiler between 1.61.0 and 1.62.0: echo '#[used] static S: () = ();' | rustup run 1.61.0 rustc --emit=obj --crate-type=lib - && nm rust_out.o echo '#[used] static S: () = ();' | rustup run 1.62.0 rustc --emit=obj --crate-type=lib - && nm rust_out.o Gives: 0000000000000000 r _ZN8rust_out1S17h48027ce0da975467E 0000000000000000 R _ZN8rust_out1S17h58e1f3d9c0e97cefE See https://godbolt.org/z/KE6jneoo4. ] Signed-off-by: Andrea Righi <andrea.righi@canonical.com> Reviewed-by: Vincenzo Palazzo <vincenzopalazzodev@gmail.com> Reviewed-by: Eric Curtin <ecurtin@redhat.com> Reviewed-by: Martin Rodriguez Reboredo <yakoyoku@gmail.com> Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
2023-04-19bpf: Fix incorrect verifier pruning due to missing register precision taintsDaniel Borkmann1-0/+15
Juan Jose et al reported an issue found via fuzzing where the verifier's pruning logic prematurely marks a program path as safe. Consider the following program: 0: (b7) r6 = 1024 1: (b7) r7 = 0 2: (b7) r8 = 0 3: (b7) r9 = -2147483648 4: (97) r6 %= 1025 5: (05) goto pc+0 6: (bd) if r6 <= r9 goto pc+2 7: (97) r6 %= 1 8: (b7) r9 = 0 9: (bd) if r6 <= r9 goto pc+1 10: (b7) r6 = 0 11: (b7) r0 = 0 12: (63) *(u32 *)(r10 -4) = r0 13: (18) r4 = 0xffff888103693400 // map_ptr(ks=4,vs=48) 15: (bf) r1 = r4 16: (bf) r2 = r10 17: (07) r2 += -4 18: (85) call bpf_map_lookup_elem#1 19: (55) if r0 != 0x0 goto pc+1 20: (95) exit 21: (77) r6 >>= 10 22: (27) r6 *= 8192 23: (bf) r1 = r0 24: (0f) r0 += r6 25: (79) r3 = *(u64 *)(r0 +0) 26: (7b) *(u64 *)(r1 +0) = r3 27: (95) exit The verifier treats this as safe, leading to oob read/write access due to an incorrect verifier conclusion: func#0 @0 0: R1=ctx(off=0,imm=0) R10=fp0 0: (b7) r6 = 1024 ; R6_w=1024 1: (b7) r7 = 0 ; R7_w=0 2: (b7) r8 = 0 ; R8_w=0 3: (b7) r9 = -2147483648 ; R9_w=-2147483648 4: (97) r6 %= 1025 ; R6_w=scalar() 5: (05) goto pc+0 6: (bd) if r6 <= r9 goto pc+2 ; R6_w=scalar(umin=18446744071562067969,var_off=(0xffffffff00000000; 0xffffffff)) R9_w=-2147483648 7: (97) r6 %= 1 ; R6_w=scalar() 8: (b7) r9 = 0 ; R9=0 9: (bd) if r6 <= r9 goto pc+1 ; R6=scalar(umin=1) R9=0 10: (b7) r6 = 0 ; R6_w=0 11: (b7) r0 = 0 ; R0_w=0 12: (63) *(u32 *)(r10 -4) = r0 last_idx 12 first_idx 9 regs=1 stack=0 before 11: (b7) r0 = 0 13: R0_w=0 R10=fp0 fp-8=0000???? 13: (18) r4 = 0xffff8ad3886c2a00 ; R4_w=map_ptr(off=0,ks=4,vs=48,imm=0) 15: (bf) r1 = r4 ; R1_w=map_ptr(off=0,ks=4,vs=48,imm=0) R4_w=map_ptr(off=0,ks=4,vs=48,imm=0) 16: (bf) r2 = r10 ; R2_w=fp0 R10=fp0 17: (07) r2 += -4 ; R2_w=fp-4 18: (85) call bpf_map_lookup_elem#1 ; R0=map_value_or_null(id=1,off=0,ks=4,vs=48,imm=0) 19: (55) if r0 != 0x0 goto pc+1 ; R0=0 20: (95) exit from 19 to 21: R0=map_value(off=0,ks=4,vs=48,imm=0) R6=0 R7=0 R8=0 R9=0 R10=fp0 fp-8=mmmm???? 21: (77) r6 >>= 10 ; R6_w=0 22: (27) r6 *= 8192 ; R6_w=0 23: (bf) r1 = r0 ; R0=map_value(off=0,ks=4,vs=48,imm=0) R1_w=map_value(off=0,ks=4,vs=48,imm=0) 24: (0f) r0 += r6 last_idx 24 first_idx 19 regs=40 stack=0 before 23: (bf) r1 = r0 regs=40 stack=0 before 22: (27) r6 *= 8192 regs=40 stack=0 before 21: (77) r6 >>= 10 regs=40 stack=0 before 19: (55) if r0 != 0x0 goto pc+1 parent didn't have regs=40 stack=0 marks: R0_rw=map_value_or_null(id=1,off=0,ks=4,vs=48,imm=0) R6_rw=P0 R7=0 R8=0 R9=0 R10=fp0 fp-8=mmmm???? last_idx 18 first_idx 9 regs=40 stack=0 before 18: (85) call bpf_map_lookup_elem#1 regs=40 stack=0 before 17: (07) r2 += -4 regs=40 stack=0 before 16: (bf) r2 = r10 regs=40 stack=0 before 15: (bf) r1 = r4 regs=40 stack=0 before 13: (18) r4 = 0xffff8ad3886c2a00 regs=40 stack=0 before 12: (63) *(u32 *)(r10 -4) = r0 regs=40 stack=0 before 11: (b7) r0 = 0 regs=40 stack=0 before 10: (b7) r6 = 0 25: (79) r3 = *(u64 *)(r0 +0) ; R0_w=map_value(off=0,ks=4,vs=48,imm=0) R3_w=scalar() 26: (7b) *(u64 *)(r1 +0) = r3 ; R1_w=map_value(off=0,ks=4,vs=48,imm=0) R3_w=scalar() 27: (95) exit from 9 to 11: R1=ctx(off=0,imm=0) R6=0 R7=0 R8=0 R9=0 R10=fp0 11: (b7) r0 = 0 ; R0_w=0 12: (63) *(u32 *)(r10 -4) = r0 last_idx 12 first_idx 11 regs=1 stack=0 before 11: (b7) r0 = 0 13: R0_w=0 R10=fp0 fp-8=0000???? 13: (18) r4 = 0xffff8ad3886c2a00 ; R4_w=map_ptr(off=0,ks=4,vs=48,imm=0) 15: (bf) r1 = r4 ; R1_w=map_ptr(off=0,ks=4,vs=48,imm=0) R4_w=map_ptr(off=0,ks=4,vs=48,imm=0) 16: (bf) r2 = r10 ; R2_w=fp0 R10=fp0 17: (07) r2 += -4 ; R2_w=fp-4 18: (85) call bpf_map_lookup_elem#1 frame 0: propagating r6 last_idx 19 first_idx 11 regs=40 stack=0 before 18: (85) call bpf_map_lookup_elem#1 regs=40 stack=0 before 17: (07) r2 += -4 regs=40 stack=0 before 16: (bf) r2 = r10 regs=40 stack=0 before 15: (bf) r1 = r4 regs=40 stack=0 before 13: (18) r4 = 0xffff8ad3886c2a00 regs=40 stack=0 before 12: (63) *(u32 *)(r10 -4) = r0 regs=40 stack=0 before 11: (b7) r0 = 0 parent didn't have regs=40 stack=0 marks: R1=ctx(off=0,imm=0) R6_r=P0 R7=0 R8=0 R9=0 R10=fp0 last_idx 9 first_idx 9 regs=40 stack=0 before 9: (bd) if r6 <= r9 goto pc+1 parent didn't have regs=40 stack=0 marks: R1=ctx(off=0,imm=0) R6_rw=Pscalar() R7_w=0 R8_w=0 R9_rw=0 R10=fp0 last_idx 8 first_idx 0 regs=40 stack=0 before 8: (b7) r9 = 0 regs=40 stack=0 before 7: (97) r6 %= 1 regs=40 stack=0 before 6: (bd) if r6 <= r9 goto pc+2 regs=40 stack=0 before 5: (05) goto pc+0 regs=40 stack=0 before 4: (97) r6 %= 1025 regs=40 stack=0 before 3: (b7) r9 = -2147483648 regs=40 stack=0 before 2: (b7) r8 = 0 regs=40 stack=0 before 1: (b7) r7 = 0 regs=40 stack=0 before 0: (b7) r6 = 1024 19: safe frame 0: propagating r6 last_idx 9 first_idx 0 regs=40 stack=0 before 6: (bd) if r6 <= r9 goto pc+2 regs=40 stack=0 before 5: (05) goto pc+0 regs=40 stack=0 before 4: (97) r6 %= 1025 regs=40 stack=0 before 3: (b7) r9 = -2147483648 regs=40 stack=0 before 2: (b7) r8 = 0 regs=40 stack=0 before 1: (b7) r7 = 0 regs=40 stack=0 before 0: (b7) r6 = 1024 from 6 to 9: safe verification time 110 usec stack depth 4 processed 36 insns (limit 1000000) max_states_per_insn 0 total_states 3 peak_states 3 mark_read 2 The verifier considers this program as safe by mistakenly pruning unsafe code paths. In the above func#0, code lines 0-10 are of interest. In line 0-3 registers r6 to r9 are initialized with known scalar values. In line 4 the register r6 is reset to an unknown scalar given the verifier does not track modulo operations. Due to this, the verifier can also not determine precisely which branches in line 6 and 9 are taken, therefore it needs to explore them both. As can be seen, the verifier starts with exploring the false/fall-through paths first. The 'from 19 to 21' path has both r6=0 and r9=0 and the pointer arithmetic on r0 += r6 is therefore considered safe. Given the arithmetic, r6 is correctly marked for precision tracking where backtracking kicks in where it walks back the current path all the way where r6 was set to 0 in the fall-through branch. Next, the pruning logics pops the path 'from 9 to 11' from the stack. Also here, the state of the registers is the same, that is, r6=0 and r9=0, so that at line 19 the path can be pruned as it is considered safe. It is interesting to note that the conditional in line 9 turned r6 into a more precise state, that is, in the fall-through path at the beginning of line 10, it is R6=scalar(umin=1), and in the branch-taken path (which is analyzed here) at the beginning of line 11, r6 turned into a known const r6=0 as r9=0 prior to that and therefore (unsigned) r6 <= 0 concludes that r6 must be 0 (**): [...] ; R6_w=scalar() 9: (bd) if r6 <= r9 goto pc+1 ; R6=scalar(umin=1) R9=0 [...] from 9 to 11: R1=ctx(off=0,imm=0) R6=0 R7=0 R8=0 R9=0 R10=fp0 [...] The next path is 'from 6 to 9'. The verifier considers the old and current state equivalent, and therefore prunes the search incorrectly. Looking into the two states which are being compared by the pruning logic at line 9, the old state consists of R6_rwD=Pscalar() R9_rwD=0 R10=fp0 and the new state consists of R1=ctx(off=0,imm=0) R6_w=scalar(umax=18446744071562067968) R7_w=0 R8_w=0 R9_w=-2147483648 R10=fp0. While r6 had the reg->precise flag correctly set in the old state, r9 did not. Both r6'es are considered as equivalent given the old one is a superset of the current, more precise one, however, r9's actual values (0 vs 0x80000000) mismatch. Given the old r9 did not have reg->precise flag set, the verifier does not consider the register as contributing to the precision state of r6, and therefore it considered both r9 states as equivalent. However, for this specific pruned path (which is also the actual path taken at runtime), register r6 will be 0x400 and r9 0x80000000 when reaching line 21, thus oob-accessing the map. The purpose of precision tracking is to initially mark registers (including spilled ones) as imprecise to help verifier's pruning logic finding equivalent states it can then prune if they don't contribute to the program's safety aspects. For example, if registers are used for pointer arithmetic or to pass constant length to a helper, then the verifier sets reg->precise flag and backtracks the BPF program instruction sequence and chain of verifier states to ensure that the given register or stack slot including their dependencies are marked as precisely tracked scalar. This also includes any other registers and slots that contribute to a tracked state of given registers/stack slot. This backtracking relies on recorded jmp_history and is able to traverse entire chain of parent states. This process ends only when all the necessary registers/slots and their transitive dependencies are marked as precise. The backtrack_insn() is called from the current instruction up to the first instruction, and its purpose is to compute a bitmask of registers and stack slots that need precision tracking in the parent's verifier state. For example, if a current instruction is r6 = r7, then r6 needs precision after this instruction and r7 needs precision before this instruction, that is, in the parent state. Hence for the latter r7 is marked and r6 unmarked. For the class of jmp/jmp32 instructions, backtrack_insn() today only looks at call and exit instructions and for all other conditionals the masks remain as-is. However, in the given situation register r6 has a dependency on r9 (as described above in **), so also that one needs to be marked for precision tracking. In other words, if an imprecise register influences a precise one, then the imprecise register should also be marked precise. Meaning, in the parent state both dest and src register need to be tracked for precision and therefore the marking must be more conservative by setting reg->precise flag for both. The precision propagation needs to cover both for the conditional: if the src reg was marked but not the dst reg and vice versa. After the fix the program is correctly rejected: func#0 @0 0: R1=ctx(off=0,imm=0) R10=fp0 0: (b7) r6 = 1024 ; R6_w=1024 1: (b7) r7 = 0 ; R7_w=0 2: (b7) r8 = 0 ; R8_w=0 3: (b7) r9 = -2147483648 ; R9_w=-2147483648 4: (97) r6 %= 1025 ; R6_w=scalar() 5: (05) goto pc+0 6: (bd) if r6 <= r9 goto pc+2 ; R6_w=scalar(umin=18446744071562067969,var_off=(0xffffffff80000000; 0x7fffffff),u32_min=-2147483648) R9_w=-2147483648 7: (97) r6 %= 1 ; R6_w=scalar() 8: (b7) r9 = 0 ; R9=0 9: (bd) if r6 <= r9 goto pc+1 ; R6=scalar(umin=1) R9=0 10: (b7) r6 = 0 ; R6_w=0 11: (b7) r0 = 0 ; R0_w=0 12: (63) *(u32 *)(r10 -4) = r0 last_idx 12 first_idx 9 regs=1 stack=0 before 11: (b7) r0 = 0 13: R0_w=0 R10=fp0 fp-8=0000???? 13: (18) r4 = 0xffff9290dc5bfe00 ; R4_w=map_ptr(off=0,ks=4,vs=48,imm=0) 15: (bf) r1 = r4 ; R1_w=map_ptr(off=0,ks=4,vs=48,imm=0) R4_w=map_ptr(off=0,ks=4,vs=48,imm=0) 16: (bf) r2 = r10 ; R2_w=fp0 R10=fp0 17: (07) r2 += -4 ; R2_w=fp-4 18: (85) call bpf_map_lookup_elem#1 ; R0=map_value_or_null(id=1,off=0,ks=4,vs=48,imm=0) 19: (55) if r0 != 0x0 goto pc+1 ; R0=0 20: (95) exit from 19 to 21: R0=map_value(off=0,ks=4,vs=48,imm=0) R6=0 R7=0 R8=0 R9=0 R10=fp0 fp-8=mmmm???? 21: (77) r6 >>= 10 ; R6_w=0 22: (27) r6 *= 8192 ; R6_w=0 23: (bf) r1 = r0 ; R0=map_value(off=0,ks=4,vs=48,imm=0) R1_w=map_value(off=0,ks=4,vs=48,imm=0) 24: (0f) r0 += r6 last_idx 24 first_idx 19 regs=40 stack=0 before 23: (bf) r1 = r0 regs=40 stack=0 before 22: (27) r6 *= 8192 regs=40 stack=0 before 21: (77) r6 >>= 10 regs=40 stack=0 before 19: (55) if r0 != 0x0 goto pc+1 parent didn't have regs=40 stack=0 marks: R0_rw=map_value_or_null(id=1,off=0,ks=4,vs=48,imm=0) R6_rw=P0 R7=0 R8=0 R9=0 R10=fp0 fp-8=mmmm???? last_idx 18 first_idx 9 regs=40 stack=0 before 18: (85) call bpf_map_lookup_elem#1 regs=40 stack=0 before 17: (07) r2 += -4 regs=40 stack=0 before 16: (bf) r2 = r10 regs=40 stack=0 before 15: (bf) r1 = r4 regs=40 stack=0 before 13: (18) r4 = 0xffff9290dc5bfe00 regs=40 stack=0 before 12: (63) *(u32 *)(r10 -4) = r0 regs=40 stack=0 before 11: (b7) r0 = 0 regs=40 stack=0 before 10: (b7) r6 = 0 25: (79) r3 = *(u64 *)(r0 +0) ; R0_w=map_value(off=0,ks=4,vs=48,imm=0) R3_w=scalar() 26: (7b) *(u64 *)(r1 +0) = r3 ; R1_w=map_value(off=0,ks=4,vs=48,imm=0) R3_w=scalar() 27: (95) exit from 9 to 11: R1=ctx(off=0,imm=0) R6=0 R7=0 R8=0 R9=0 R10=fp0 11: (b7) r0 = 0 ; R0_w=0 12: (63) *(u32 *)(r10 -4) = r0 last_idx 12 first_idx 11 regs=1 stack=0 before 11: (b7) r0 = 0 13: R0_w=0 R10=fp0 fp-8=0000???? 13: (18) r4 = 0xffff9290dc5bfe00 ; R4_w=map_ptr(off=0,ks=4,vs=48,imm=0) 15: (bf) r1 = r4 ; R1_w=map_ptr(off=0,ks=4,vs=48,imm=0) R4_w=map_ptr(off=0,ks=4,vs=48,imm=0) 16: (bf) r2 = r10 ; R2_w=fp0 R10=fp0 17: (07) r2 += -4 ; R2_w=fp-4 18: (85) call bpf_map_lookup_elem#1 frame 0: propagating r6 last_idx 19 first_idx 11 regs=40 stack=0 before 18: (85) call bpf_map_lookup_elem#1 regs=40 stack=0 before 17: (07) r2 += -4 regs=40 stack=0 before 16: (bf) r2 = r10 regs=40 stack=0 before 15: (bf) r1 = r4 regs=40 stack=0 before 13: (18) r4 = 0xffff9290dc5bfe00 regs=40 stack=0 before 12: (63) *(u32 *)(r10 -4) = r0 regs=40 stack=0 before 11: (b7) r0 = 0 parent didn't have regs=40 stack=0 marks: R1=ctx(off=0,imm=0) R6_r=P0 R7=0 R8=0 R9=0 R10=fp0 last_idx 9 first_idx 9 regs=40 stack=0 before 9: (bd) if r6 <= r9 goto pc+1 parent didn't have regs=240 stack=0 marks: R1=ctx(off=0,imm=0) R6_rw=Pscalar() R7_w=0 R8_w=0 R9_rw=P0 R10=fp0 last_idx 8 first_idx 0 regs=240 stack=0 before 8: (b7) r9 = 0 regs=40 stack=0 before 7: (97) r6 %= 1 regs=40 stack=0 before 6: (bd) if r6 <= r9 goto pc+2 regs=240 stack=0 before 5: (05) goto pc+0 regs=240 stack=0 before 4: (97) r6 %= 1025 regs=240 stack=0 before 3: (b7) r9 = -2147483648 regs=40 stack=0 before 2: (b7) r8 = 0 regs=40 stack=0 before 1: (b7) r7 = 0 regs=40 stack=0 before 0: (b7) r6 = 1024 19: safe from 6 to 9: R1=ctx(off=0,imm=0) R6_w=scalar(umax=18446744071562067968) R7_w=0 R8_w=0 R9_w=-2147483648 R10=fp0 9: (bd) if r6 <= r9 goto pc+1 last_idx 9 first_idx 0 regs=40 stack=0 before 6: (bd) if r6 <= r9 goto pc+2 regs=240 stack=0 before 5: (05) goto pc+0 regs=240 stack=0 before 4: (97) r6 %= 1025 regs=240 stack=0 before 3: (b7) r9 = -2147483648 regs=40 stack=0 before 2: (b7) r8 = 0 regs=40 stack=0 before 1: (b7) r7 = 0 regs=40 stack=0 before 0: (b7) r6 = 1024 last_idx 9 first_idx 0 regs=200 stack=0 before 6: (bd) if r6 <= r9 goto pc+2 regs=240 stack=0 before 5: (05) goto pc+0 regs=240 stack=0 before 4: (97) r6 %= 1025 regs=240 stack=0 before 3: (b7) r9 = -2147483648 regs=40 stack=0 before 2: (b7) r8 = 0 regs=40 stack=0 before 1: (b7) r7 = 0 regs=40 stack=0 before 0: (b7) r6 = 1024 11: R6=scalar(umax=18446744071562067968) R9=-2147483648 11: (b7) r0 = 0 ; R0_w=0 12: (63) *(u32 *)(r10 -4) = r0 last_idx 12 first_idx 11 regs=1 stack=0 before 11: (b7) r0 = 0 13: R0_w=0 R10=fp0 fp-8=0000???? 13: (18) r4 = 0xffff9290dc5bfe00 ; R4_w=map_ptr(off=0,ks=4,vs=48,imm=0) 15: (bf) r1 = r4 ; R1_w=map_ptr(off=0,ks=4,vs=48,imm=0) R4_w=map_ptr(off=0,ks=4,vs=48,imm=0) 16: (bf) r2 = r10 ; R2_w=fp0 R10=fp0 17: (07) r2 += -4 ; R2_w=fp-4 18: (85) call bpf_map_lookup_elem#1 ; R0_w=map_value_or_null(id=3,off=0,ks=4,vs=48,imm=0) 19: (55) if r0 != 0x0 goto pc+1 ; R0_w=0 20: (95) exit from 19 to 21: R0=map_value(off=0,ks=4,vs=48,imm=0) R6=scalar(umax=18446744071562067968) R7=0 R8=0 R9=-2147483648 R10=fp0 fp-8=mmmm???? 21: (77) r6 >>= 10 ; R6_w=scalar(umax=18014398507384832,var_off=(0x0; 0x3fffffffffffff)) 22: (27) r6 *= 8192 ; R6_w=scalar(smax=9223372036854767616,umax=18446744073709543424,var_off=(0x0; 0xffffffffffffe000),s32_max=2147475456,u32_max=-8192) 23: (bf) r1 = r0 ; R0=map_value(off=0,ks=4,vs=48,imm=0) R1_w=map_value(off=0,ks=4,vs=48,imm=0) 24: (0f) r0 += r6 last_idx 24 first_idx 21 regs=40 stack=0 before 23: (bf) r1 = r0 regs=40 stack=0 before 22: (27) r6 *= 8192 regs=40 stack=0 before 21: (77) r6 >>= 10 parent didn't have regs=40 stack=0 marks: R0_rw=map_value(off=0,ks=4,vs=48,imm=0) R6_r=Pscalar(umax=18446744071562067968) R7=0 R8=0 R9=-2147483648 R10=fp0 fp-8=mmmm???? last_idx 19 first_idx 11 regs=40 stack=0 before 19: (55) if r0 != 0x0 goto pc+1 regs=40 stack=0 before 18: (85) call bpf_map_lookup_elem#1 regs=40 stack=0 before 17: (07) r2 += -4 regs=40 stack=0 before 16: (bf) r2 = r10 regs=40 stack=0 before 15: (bf) r1 = r4 regs=40 stack=0 before 13: (18) r4 = 0xffff9290dc5bfe00 regs=40 stack=0 before 12: (63) *(u32 *)(r10 -4) = r0 regs=40 stack=0 before 11: (b7) r0 = 0 parent didn't have regs=40 stack=0 marks: R1=ctx(off=0,imm=0) R6_rw=Pscalar(umax=18446744071562067968) R7_w=0 R8_w=0 R9_w=-2147483648 R10=fp0 last_idx 9 first_idx 0 regs=40 stack=0 before 9: (bd) if r6 <= r9 goto pc+1 regs=240 stack=0 before 6: (bd) if r6 <= r9 goto pc+2 regs=240 stack=0 before 5: (05) goto pc+0 regs=240 stack=0 before 4: (97) r6 %= 1025 regs=240 stack=0 before 3: (b7) r9 = -2147483648 regs=40 stack=0 before 2: (b7) r8 = 0 regs=40 stack=0 before 1: (b7) r7 = 0 regs=40 stack=0 before 0: (b7) r6 = 1024 math between map_value pointer and register with unbounded min value is not allowed verification time 886 usec stack depth 4 processed 49 insns (limit 1000000) max_states_per_insn 1 total_states 5 peak_states 5 mark_read 2 Fixes: b5dc0163d8fd ("bpf: precise scalar_value tracking") Reported-by: Juan Jose Lopez Jaimez <jjlopezjaimez@google.com> Reported-by: Meador Inge <meadori@google.com> Reported-by: Simon Scannell <simonscannell@google.com> Reported-by: Nenad Stojanovski <thenenadx@google.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Co-developed-by: Andrii Nakryiko <andrii@kernel.org> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Reviewed-by: John Fastabend <john.fastabend@gmail.com> Reviewed-by: Juan Jose Lopez Jaimez <jjlopezjaimez@google.com> Reviewed-by: Meador Inge <meadori@google.com> Reviewed-by: Simon Scannell <simonscannell@google.com>
2023-04-19KVM: arm64: Fix buffer overflow in kvm_arm_set_fw_reg()Dan Carpenter1-0/+2
The KVM_REG_SIZE() comes from the ioctl and it can be a power of two between 0-32768 but if it is more than sizeof(long) this will corrupt memory. Fixes: 99adb567632b ("KVM: arm/arm64: Add save/restore support for firmware workaround state") Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org> Reviewed-by: Steven Price <steven.price@arm.com> Reviewed-by: Eric Auger <eric.auger@redhat.com> Reviewed-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/4efbab8c-640f-43b2-8ac6-6d68e08280fe@kili.mountain Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
2023-04-19Merge tag 'nfsd-6.3-6' of ↵Linus Torvalds1-1/+5
git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux Pull nfsd fixes from Chuck Lever: - Address two issues with the new GSS krb5 Kunit tests * tag 'nfsd-6.3-6' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux: SUNRPC: Fix failures of checksum Kunit tests sunrpc: Fix RFC6803 encryption test
2023-04-19Merge tag 'loongarch-fixes-6.3-1' of ↵Linus Torvalds22-49/+121
git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson Pull LoongArch fixes from Huacai Chen: "Some bug fixes, some build fixes, a comment fix and a trivial cleanup" * tag 'loongarch-fixes-6.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson: tools/loongarch: Use __SIZEOF_LONG__ to define __BITS_PER_LONG LoongArch: Replace hard-coded values in comments with VALEN LoongArch: Clean up plat_swiotlb_setup() related code LoongArch: Check unwind_error() in arch_stack_walk() LoongArch: Adjust user_regset_copyin parameter to the correct offset LoongArch: Adjust user_watch_state for explicit alignment LoongArch: module: set section addresses to 0x0 LoongArch: Mark 3 symbol exports as non-GPL LoongArch: Enable PG when wakeup from suspend LoongArch: Fix _CONST64_(x) as unsigned LoongArch: Fix build error if CONFIG_SUSPEND is not set LoongArch: Fix probing of the CRC32 feature LoongArch: Make WriteCombine configurable for ioremap()
2023-04-19spi: spi-rockchip: Fix missing unwind goto in rockchip_sfc_probe()Li Lanzhe1-1/+1
If devm_request_irq() fails, then we are directly return 'ret' without clk_disable_unprepare(sfc->clk) and clk_disable_unprepare(sfc->hclk). Fix this by changing direct return to a goto 'err_irq'. Fixes: 0b89fc0a367e ("spi: rockchip-sfc: add rockchip serial flash controller") Signed-off-by: Li Lanzhe <u202212060@hust.edu.cn> Reviewed-by: Dongliang Mu <dzm91@hust.edu.cn> Link: https://lore.kernel.org/r/20230419115030.6029-1-u202212060@hust.edu.cn Signed-off-by: Mark Brown <broonie@kernel.org>
2023-04-19ASoC: fsl_asrc_dma: fix potential null-ptr-derefNikita Zhandarovich1-3/+8
dma_request_slave_channel() may return NULL which will lead to NULL pointer dereference error in 'tmp_chan->private'. Correct this behaviour by, first, switching from deprecated function dma_request_slave_channel() to dma_request_chan(). Secondly, enable sanity check for the resuling value of dma_request_chan(). Also, fix description that follows the enacted changes and that concerns the use of dma_request_slave_channel(). Fixes: 706e2c881158 ("ASoC: fsl_asrc_dma: Reuse the dma channel if available in Back-End") Co-developed-by: Natalia Petrova <n.petrova@fintech.ru> Signed-off-by: Nikita Zhandarovich <n.zhandarovich@fintech.ru> Acked-by: Shengjiu Wang <shengjiu.wang@gmail.com> Link: https://lore.kernel.org/r/20230417133242.53339-1-n.zhandarovich@fintech.ru Signed-off-by: Mark Brown <broonie@kernel.org>
2023-04-19ASoC: fsl_sai: Fix pins setting for i.MX8QM platformChancel Liu1-1/+1
SAI on i.MX8QM platform supports the data lines up to 4. So the pins setting should be corrected to 4. Fixes: eba0f0077519 ("ASoC: fsl_sai: Enable combine mode soft") Signed-off-by: Chancel Liu <chancel.liu@nxp.com> Acked-by: Shengjiu Wang <shengjiu.wang@gmail.com> Reviewed-by: Iuliana Prodan <iuliana.prodan@nxp.com> Link: https://lore.kernel.org/r/20230418094259.4150771-1-chancel.liu@nxp.com Signed-off-by: Mark Brown <broonie@kernel.org>
2023-04-19hamradio: drop ISA_DMA_API dependencyArnd Bergmann1-1/+1
It looks like the dependency got added accidentally in commit a553260618d8 ("[PATCH] ISA DMA Kconfig fixes - part 3"). Unlike the previously removed dmascc driver, the scc driver never used DMA. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-04-19mlxsw: pci: Fix possible crash during initializationIdo Schimmel1-1/+1
During initialization the driver issues a reset command via its command interface in order to remove previous configuration from the device. After issuing the reset, the driver waits for 200ms before polling on the "system_status" register using memory-mapped IO until the device reaches a ready state (0x5E). The wait is necessary because the reset command only triggers the reset, but the reset itself happens asynchronously. If the driver starts polling too soon, the read of the "system_status" register will never return and the system will crash [1]. The issue was discovered when the device was flashed with a development firmware version where the reset routine took longer to complete. The issue was fixed in the firmware, but it exposed the fact that the current wait time is borderline. Fix by increasing the wait time from 200ms to 400ms. With this patch and the buggy firmware version, the issue did not reproduce in 10 reboots whereas without the patch the issue is reproduced quite consistently. [1] mce: CPUs not responding to MCE broadcast (may include false positives): 0,4 mce: CPUs not responding to MCE broadcast (may include false positives): 0,4 Kernel panic - not syncing: Timeout: Not all CPUs entered broadcast exception handler Shutting down cpus with NMI Kernel Offset: 0x12000000 from 0xffffffff81000000 (relocation range: 0xffffffff80000000-0xffffffffbfffffff) Fixes: ac004e84164e ("mlxsw: pci: Wait longer before accessing the device after reset") Signed-off-by: Ido Schimmel <idosch@nvidia.com> Reviewed-by: Petr Machata <petrm@nvidia.com> Signed-off-by: Petr Machata <petrm@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-04-19ALSA: hda/realtek: Remove specific patch for Dell Precision 3260Jaroslav Kysela1-1/+0
Unfortunately, the tester gave a weak feedback (working/non-working) for this case. After the double confirmation, this change is not really required. The standard code with alc269_fallback_pin_fixup_tbl should work on this hardware. Fixes: 5911d78fabbb ("ALSA: hda/realtek: Improve support for Dell Precision 3260") Fixes: 5f4efc9dfcfd ("ALSA: hda/realtek: Fix support for Dell Precision 3260") Signed-off-by: Jaroslav Kysela <perex@perex.cz> Link: https://lore.kernel.org/r/20230419081121.304846-1-perex@perex.cz Signed-off-by: Takashi Iwai <tiwai@suse.de>
2023-04-19Merge branch 'mptcp-fixes'David S. Miller3-27/+129
Matthieu Baerts says: ==================== mptcp: fixes around listening sockets and the MPTCP worker Christoph Paasch reported a couple of issues found by syzkaller and linked to operations done by the MPTCP worker on (un)accepted sockets. Fixing these issues was not obvious and rather complex but Paolo Abeni nicely managed to propose these excellent patches that seem to satisfy syzkaller. Patch 1 partially reverts a recent fix but while still providing a solution for the previous issue, it also prevents the MPTCP worker from running concurrently with inet_csk_listen_stop(). A warning is then avoided. The partially reverted patch has been introduced in v6.3-rc3, backported up to v6.1 and fixing an issue visible from v5.18. Patch 2 prevents the MPTCP worker to race with mptcp_accept() causing a UaF when a fallback to TCP is done while in parallel, the socket is being accepted by the userspace. This is also a fix of a previous fix introduced in v6.3-rc3, backported up to v6.1 but here fixing an issue that is in theory there from v5.7. There is no need to backport it up to here as it looks like it is only visible later, around v5.18, see the previous cover-letter linked to this original fix. ==================== Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
2023-04-19mptcp: fix accept vs worker racePaolo Abeni3-33/+58
The mptcp worker and mptcp_accept() can race, as reported by Christoph: refcount_t: addition on 0; use-after-free. WARNING: CPU: 1 PID: 14351 at lib/refcount.c:25 refcount_warn_saturate+0x105/0x1b0 lib/refcount.c:25 Modules linked in: CPU: 1 PID: 14351 Comm: syz-executor.2 Not tainted 6.3.0-rc1-gde5e8fd0123c #11 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.11.0-2.el7 04/01/2014 RIP: 0010:refcount_warn_saturate+0x105/0x1b0 lib/refcount.c:25 Code: 02 31 ff 89 de e8 1b f0 a7 ff 84 db 0f 85 6e ff ff ff e8 3e f5 a7 ff 48 c7 c7 d8 c7 34 83 c6 05 6d 2d 0f 02 01 e8 cb 3d 90 ff <0f> 0b e9 4f ff ff ff e8 1f f5 a7 ff 0f b6 1d 54 2d 0f 02 31 ff 89 RSP: 0018:ffffc90000a47bf8 EFLAGS: 00010282 RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000000 RDX: ffff88802eae98c0 RSI: ffffffff81097d4f RDI: 0000000000000001 RBP: ffff88802e712180 R08: 0000000000000001 R09: 0000000000000000 R10: 0000000000000001 R11: ffff88802eaea148 R12: ffff88802e712100 R13: ffff88802e712a88 R14: ffff888005cb93a8 R15: ffff88802e712a88 FS: 0000000000000000(0000) GS:ffff88803ed00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f277fd89120 CR3: 0000000035486002 CR4: 0000000000370ee0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> __refcount_add include/linux/refcount.h:199 [inline] __refcount_inc include/linux/refcount.h:250 [inline] refcount_inc include/linux/refcount.h:267 [inline] sock_hold include/net/sock.h:775 [inline] __mptcp_close+0x4c6/0x4d0 net/mptcp/protocol.c:3051 mptcp_close+0x24/0xe0 net/mptcp/protocol.c:3072 inet_release+0x56/0xa0 net/ipv4/af_inet.c:429 __sock_release+0x51/0xf0 net/socket.c:653 sock_close+0x18/0x20 net/socket.c:1395 __fput+0x113/0x430 fs/file_table.c:321 task_work_run+0x96/0x100 kernel/task_work.c:179 exit_task_work include/linux/task_work.h:38 [inline] do_exit+0x4fc/0x10c0 kernel/exit.c:869 do_group_exit+0x51/0xf0 kernel/exit.c:1019 get_signal+0x12b0/0x1390 kernel/signal.c:2859 arch_do_signal_or_restart+0x25/0x260 arch/x86/kernel/signal.c:306 exit_to_user_mode_loop kernel/entry/common.c:168 [inline] exit_to_user_mode_prepare+0x131/0x1a0 kernel/entry/common.c:203 __syscall_exit_to_user_mode_work kernel/entry/common.c:285 [inline] syscall_exit_to_user_mode+0x19/0x40 kernel/entry/common.c:296 do_syscall_64+0x46/0x90 arch/x86/entry/common.c:86 entry_SYSCALL_64_after_hwframe+0x72/0xdc RIP: 0033:0x7fec4b4926a9 Code: Unable to access opcode bytes at 0x7fec4b49267f. RSP: 002b:00007fec49f9dd78 EFLAGS: 00000246 ORIG_RAX: 00000000000000ca RAX: fffffffffffffe00 RBX: 00000000006bc058 RCX: 00007fec4b4926a9 RDX: 0000000000000000 RSI: 0000000000000080 RDI: 00000000006bc058 RBP: 00000000006bc050 R08: 00000000007df998 R09: 00000000007df998 R10: 0000000000000000 R11: 0000000000000246 R12: 00000000006bc05c R13: fffffffffffffea8 R14: 000000000000000b R15: 000000000001fe40 </TASK> The root cause is that the worker can force fallback to TCP the first mptcp subflow, actually deleting the unaccepted msk socket. We can explicitly prevent the race delaying the unaccepted msk deletion at listener shutdown time. In case the closed subflow is later accepted, just drop the mptcp context and let the user-space deal with the paired mptcp socket. Fixes: b6985b9b8295 ("mptcp: use the workqueue to destroy unaccepted sockets") Cc: stable@vger.kernel.org Reported-by: Christoph Paasch <cpaasch@apple.com> Link: https://github.com/multipath-tcp/mptcp_net-next/issues/375 Signed-off-by: Paolo Abeni <pabeni@redhat.com> Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net> Tested-by: Christoph Paasch <cpaasch@apple.com> Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-04-19mptcp: stops worker on unaccepted sockets at listener closePaolo Abeni3-1/+78
This is a partial revert of the blamed commit, with a relevant change: mptcp_subflow_queue_clean() now just change the msk socket status and stop the worker, so that the UaF issue addressed by the blamed commit is not re-introduced. The above prevents the mptcp worker from running concurrently with inet_csk_listen_stop(), as such race would trigger a warning, as reported by Christoph: RSP: 002b:00007f784fe09cd8 EFLAGS: 00000246 ORIG_RAX: 000000000000002e WARNING: CPU: 0 PID: 25807 at net/ipv4/inet_connection_sock.c:1387 inet_csk_listen_stop+0x664/0x870 net/ipv4/inet_connection_sock.c:1387 RAX: ffffffffffffffda RBX: 00000000006bc050 RCX: 00007f7850afd6a9 RDX: 0000000000000000 RSI: 0000000020000340 RDI: 0000000000000004 Modules linked in: RBP: 0000000000000002 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 00000000006bc05c R13: fffffffffffffea8 R14: 00000000006bc050 R15: 000000000001fe40 </TASK> CPU: 0 PID: 25807 Comm: syz-executor.7 Not tainted 6.2.0-g778e54711659 #7 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.11.0-2.el7 04/01/2014 RIP: 0010:inet_csk_listen_stop+0x664/0x870 net/ipv4/inet_connection_sock.c:1387 RAX: 0000000000000000 RBX: ffff888100dfbd40 RCX: 0000000000000000 RDX: ffff8881363aab80 RSI: ffffffff81c494f4 RDI: 0000000000000005 RBP: ffff888126dad080 R08: 0000000000000005 R09: 0000000000000000 R10: 0000000000000001 R11: 0000000000000000 R12: ffff888100dfe040 R13: 0000000000000001 R14: 0000000000000000 R15: ffff888100dfbdd8 FS: 00007f7850a2c800(0000) GS:ffff88813bc00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000001b32d26000 CR3: 000000012fdd8006 CR4: 0000000000770ef0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 PKRU: 55555554 Call Trace: <TASK> __tcp_close+0x5b2/0x620 net/ipv4/tcp.c:2875 __mptcp_close_ssk+0x145/0x3d0 net/mptcp/protocol.c:2427 mptcp_destroy_common+0x8a/0x1c0 net/mptcp/protocol.c:3277 mptcp_destroy+0x41/0x60 net/mptcp/protocol.c:3304 __mptcp_destroy_sock+0x56/0x140 net/mptcp/protocol.c:2965 __mptcp_close+0x38f/0x4a0 net/mptcp/protocol.c:3057 mptcp_close+0x24/0xe0 net/mptcp/protocol.c:3072 inet_release+0x53/0xa0 net/ipv4/af_inet.c:429 __sock_release+0x4e/0xf0 net/socket.c:651 sock_close+0x15/0x20 net/socket.c:1393 __fput+0xff/0x420 fs/file_table.c:321 task_work_run+0x8b/0xe0 kernel/task_work.c:179 resume_user_mode_work include/linux/resume_user_mode.h:49 [inline] exit_to_user_mode_loop kernel/entry/common.c:171 [inline] exit_to_user_mode_prepare+0x113/0x120 kernel/entry/common.c:203 __syscall_exit_to_user_mode_work kernel/entry/common.c:285 [inline] syscall_exit_to_user_mode+0x1d/0x40 kernel/entry/common.c:296 do_syscall_64+0x46/0x90 arch/x86/entry/common.c:86 entry_SYSCALL_64_after_hwframe+0x72/0xdc RIP: 0033:0x7f7850af70dc RAX: 0000000000000000 RBX: 0000000000000004 RCX: 00007f7850af70dc RDX: 00007f7850a2c800 RSI: 0000000000000002 RDI: 0000000000000003 RBP: 00000000006bd980 R08: 0000000000000000 R09: 00000000000018a0 R10: 00000000316338a4 R11: 0000000000000293 R12: 0000000000211e31 R13: 00000000006bc05c R14: 00007f785062c000 R15: 0000000000211af0 Fixes: 0a3f4f1f9c27 ("mptcp: fix UaF in listener shutdown") Cc: stable@vger.kernel.org Reported-by: Christoph Paasch <cpaasch@apple.com> Link: https://github.com/multipath-tcp/mptcp_net-next/issues/371 Signed-off-by: Paolo Abeni <pabeni@redhat.com> Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net> Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-04-19net: rpl: fix rpl header size calculationAlexander Aring1-1/+2
This patch fixes a missing 8 byte for the header size calculation. The ipv6_rpl_srh_size() is used to check a skb_pull() on skb->data which points to skb_transport_header(). Currently we only check on the calculated addresses fields using CmprI and CmprE fields, see: https://www.rfc-editor.org/rfc/rfc6554#section-3 there is however a missing 8 byte inside the calculation which stands for the fields before the addresses field. Those 8 bytes are represented by sizeof(struct ipv6_rpl_sr_hdr) expression. Fixes: 8610c7c6e3bd ("net: ipv6: add support for rpl sr exthdr") Signed-off-by: Alexander Aring <aahringo@redhat.com> Reported-by: maxpl0it <maxpl0it@protonmail.com> Reviewed-by: David Ahern <dsahern@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-04-19net: vmxnet3: Fix NULL pointer dereference in vmxnet3_rq_rx_complete()Seiji Nishikawa1-1/+1
When vmxnet3_rq_create() fails to allocate rq->data_ring.base due to page allocation failure, subsequent call to vmxnet3_rq_rx_complete() can result in NULL pointer dereference. To fix this bug, check not only that rxDataRingUsed is true but also that adapter->rxdataring_enabled is true before calling memcpy() in vmxnet3_rq_rx_complete(). [1728352.477993] ethtool: page allocation failure: order:9, mode:0x6000c0(GFP_KERNEL), nodemask=(null),cpuset=/,mems_allowed=0 ... [1728352.478009] Call Trace: [1728352.478028] dump_stack+0x41/0x60 [1728352.478035] warn_alloc.cold.120+0x7b/0x11b [1728352.478038] ? _cond_resched+0x15/0x30 [1728352.478042] ? __alloc_pages_direct_compact+0x15f/0x170 [1728352.478043] __alloc_pages_slowpath+0xcd3/0xd10 [1728352.478047] __alloc_pages_nodemask+0x2e2/0x320 [1728352.478049] __dma_direct_alloc_pages.constprop.25+0x8a/0x120 [1728352.478053] dma_direct_alloc+0x5a/0x2a0 [1728352.478056] vmxnet3_rq_create.part.57+0x17c/0x1f0 [vmxnet3] ... [1728352.478188] vmxnet3 0000:0b:00.0 ens192: rx data ring will be disabled ... [1728352.515347] BUG: unable to handle kernel NULL pointer dereference at 0000000000000034 ... [1728352.515440] RIP: 0010:memcpy_orig+0x54/0x130 ... [1728352.515655] Call Trace: [1728352.515665] <IRQ> [1728352.515672] vmxnet3_rq_rx_complete+0x419/0xef0 [vmxnet3] [1728352.515690] vmxnet3_poll_rx_only+0x31/0xa0 [vmxnet3] ... Signed-off-by: Seiji Nishikawa <snishika@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-04-19bonding: Fix memory leak when changing bond type to EthernetIdo Schimmel1-3/+4
When a net device is put administratively up, its 'IFF_UP' flag is set (if not set already) and a 'NETDEV_UP' notification is emitted, which causes the 8021q driver to add VLAN ID 0 on the device. The reverse happens when a net device is put administratively down. When changing the type of a bond to Ethernet, its 'IFF_UP' flag is incorrectly cleared, resulting in the kernel skipping the above process and VLAN ID 0 being leaked [1]. Fix by restoring the flag when changing the type to Ethernet, in a similar fashion to the restoration of the 'IFF_SLAVE' flag. The issue can be reproduced using the script in [2], with example out before and after the fix in [3]. [1] unreferenced object 0xffff888103479900 (size 256): comm "ip", pid 329, jiffies 4294775225 (age 28.561s) hex dump (first 32 bytes): 00 a0 0c 15 81 88 ff ff 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ backtrace: [<ffffffff81a6051a>] kmalloc_trace+0x2a/0xe0 [<ffffffff8406426c>] vlan_vid_add+0x30c/0x790 [<ffffffff84068e21>] vlan_device_event+0x1491/0x21a0 [<ffffffff81440c8e>] notifier_call_chain+0xbe/0x1f0 [<ffffffff8372383a>] call_netdevice_notifiers_info+0xba/0x150 [<ffffffff837590f2>] __dev_notify_flags+0x132/0x2e0 [<ffffffff8375ad9f>] dev_change_flags+0x11f/0x180 [<ffffffff8379af36>] do_setlink+0xb96/0x4060 [<ffffffff837adf6a>] __rtnl_newlink+0xc0a/0x18a0 [<ffffffff837aec6c>] rtnl_newlink+0x6c/0xa0 [<ffffffff837ac64e>] rtnetlink_rcv_msg+0x43e/0xe00 [<ffffffff839a99e0>] netlink_rcv_skb+0x170/0x440 [<ffffffff839a738f>] netlink_unicast+0x53f/0x810 [<ffffffff839a7fcb>] netlink_sendmsg+0x96b/0xe90 [<ffffffff8369d12f>] ____sys_sendmsg+0x30f/0xa70 [<ffffffff836a6d7a>] ___sys_sendmsg+0x13a/0x1e0 unreferenced object 0xffff88810f6a83e0 (size 32): comm "ip", pid 329, jiffies 4294775225 (age 28.561s) hex dump (first 32 bytes): a0 99 47 03 81 88 ff ff a0 99 47 03 81 88 ff ff ..G.......G..... 81 00 00 00 01 00 00 00 cc cc cc cc cc cc cc cc ................ backtrace: [<ffffffff81a6051a>] kmalloc_trace+0x2a/0xe0 [<ffffffff84064369>] vlan_vid_add+0x409/0x790 [<ffffffff84068e21>] vlan_device_event+0x1491/0x21a0 [<ffffffff81440c8e>] notifier_call_chain+0xbe/0x1f0 [<ffffffff8372383a>] call_netdevice_notifiers_info+0xba/0x150 [<ffffffff837590f2>] __dev_notify_flags+0x132/0x2e0 [<ffffffff8375ad9f>] dev_change_flags+0x11f/0x180 [<ffffffff8379af36>] do_setlink+0xb96/0x4060 [<ffffffff837adf6a>] __rtnl_newlink+0xc0a/0x18a0 [<ffffffff837aec6c>] rtnl_newlink+0x6c/0xa0 [<ffffffff837ac64e>] rtnetlink_rcv_msg+0x43e/0xe00 [<ffffffff839a99e0>] netlink_rcv_skb+0x170/0x440 [<ffffffff839a738f>] netlink_unicast+0x53f/0x810 [<ffffffff839a7fcb>] netlink_sendmsg+0x96b/0xe90 [<ffffffff8369d12f>] ____sys_sendmsg+0x30f/0xa70 [<ffffffff836a6d7a>] ___sys_sendmsg+0x13a/0x1e0 [2] ip link add name t-nlmon type nlmon ip link add name t-dummy type dummy ip link add name t-bond type bond mode active-backup ip link set dev t-bond up ip link set dev t-nlmon master t-bond ip link set dev t-nlmon nomaster ip link show dev t-bond ip link set dev t-dummy master t-bond ip link show dev t-bond ip link del dev t-bond ip link del dev t-dummy ip link del dev t-nlmon [3] Before: 12: t-bond: <NO-CARRIER,BROADCAST,MULTICAST,MASTER,UP> mtu 1500 qdisc noqueue state DOWN mode DEFAULT group default qlen 1000 link/netlink 12: t-bond: <BROADCAST,MULTICAST,MASTER,LOWER_UP> mtu 1500 qdisc noqueue state UP mode DEFAULT group default qlen 1000 link/ether 46:57:39:a4:46:a2 brd ff:ff:ff:ff:ff:ff After: 12: t-bond: <NO-CARRIER,BROADCAST,MULTICAST,MASTER,UP> mtu 1500 qdisc noqueue state DOWN mode DEFAULT group default qlen 1000 link/netlink 12: t-bond: <BROADCAST,MULTICAST,MASTER,UP,LOWER_UP> mtu 1500 qdisc noqueue state UP mode DEFAULT group default qlen 1000 link/ether 66:48:7b:74:b6:8a brd ff:ff:ff:ff:ff:ff Fixes: e36b9d16c6a6 ("bonding: clean muticast addresses when device changes type") Fixes: 75c78500ddad ("bonding: remap muticast addresses without using dev_close() and dev_open()") Fixes: 9ec7eb60dcbc ("bonding: restore IFF_MASTER/SLAVE flags on bond enslave ether type change") Reported-by: Mirsad Goran Todorovac <mirsad.todorovac@alu.unizg.hr> Link: https://lore.kernel.org/netdev/78a8a03b-6070-3e6b-5042-f848dab16fb8@alu.unizg.hr/ Tested-by: Mirsad Goran Todorovac <mirsad.todorovac@alu.unizg.hr> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Acked-by: Jay Vosburgh <jay.vosburgh@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-04-19tools/loongarch: Use __SIZEOF_LONG__ to define __BITS_PER_LONGTiezhu Yang1-1/+1
Although __SIZEOF_POINTER__ is equal to _SIZEOF_LONG__ on LoongArch, it is better to use __SIZEOF_LONG__ to define __BITS_PER_LONG to keep consistent between arch/loongarch/include/uapi/asm/bitsperlong.h and tools/arch/loongarch/include/uapi/asm/bitsperlong.h. Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
2023-04-19LoongArch: Replace hard-coded values in comments with VALENEnze Li1-2/+2
According to LoongArch documentation [1], CSR.PGDL and CSR.PGDH are concerned with the VA's MSB which is VALEN-1 instead of always being 47. Fix comments to avoid misleading others. [1] https://loongson.github.io/LoongArch-Documentation/LoongArch-Vol1-EN.html#page-global-directory-base-address-for-lower-half-address-space Reviewed-by: WANG Xuerui <git@xen0n.name> Signed-off-by: Enze Li <lienze@kylinos.cn> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
2023-04-19LoongArch: Clean up plat_swiotlb_setup() related codeTiezhu Yang2-3/+2
After commit c78c43fe7d42 ("LoongArch: Use acpi_arch_dma_setup() and remove ARCH_HAS_PHYS_TO_DMA"), plat_swiotlb_setup() has been deleted, so clean up the related code. Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
2023-04-19LoongArch: Check unwind_error() in arch_stack_walk()Tiezhu Yang3-2/+5
We can see the following messages with CONFIG_PROVE_LOCKING=y on LoongArch: BUG: MAX_STACK_TRACE_ENTRIES too low! turning off the locking correctness validator. This is because stack_trace_save() returns a big value after call arch_stack_walk(), here is the call trace: save_trace() stack_trace_save() arch_stack_walk() stack_trace_consume_entry() arch_stack_walk() should return immediately if unwind_next_frame() failed, no need to do the useless loops to increase the value of c->len in stack_trace_consume_entry(), then we can fix the above problem. Cc: stable@vger.kernel.org Reported-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/all/8a44ad71-68d2-4926-892f-72bfc7a67e2a@roeck-us.net/ Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
2023-04-19LoongArch: Adjust user_regset_copyin parameter to the correct offsetQing Zhang1-5/+5
Ensure that user_watch_state can be set correctly by the user. Signed-off-by: Qing Zhang <zhangqing@loongson.cn> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
2023-04-19LoongArch: Adjust user_watch_state for explicit alignmentQing Zhang2-5/+13
This is done in order to easily calculate the number of breakpoints in hw_break_get()/hw_break_set(). Signed-off-by: Qing Zhang <zhangqing@loongson.cn> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
2023-04-19Merge git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nfJakub Kicinski5-48/+83
Pablo Neira Ayuso says: ==================== Netfilter fixes for net The following patchset contains Netfilter fixes for net: 1) Unbreak br_netfilter physdev match support, from Florian Westphal. 2) Use GFP_KERNEL_ACCOUNT for stateful/policy objects, from Chen Aotian. 3) Use IS_ENABLED() in nf_reset_trace(), from Florian Westphal. 4) Fix validation of catch-all set element. 5) Tighten requirements for catch-all set elements. * git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf: netfilter: nf_tables: tighten netlink attribute requirements for catch-all elements netfilter: nf_tables: validate catch-all set elements netfilter: nf_tables: fix ifdef to also consider nf_tables=m netfilter: nf_tables: Modify nla_memdup's flag to GFP_KERNEL_ACCOUNT netfilter: br_netfilter: fix recent physdev match breakage ==================== Link: https://lore.kernel.org/r/20230418145048.67270-1-pablo@netfilter.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-04-19cifs: Reapply lost fix from commit 30b2b2196d6eDavid Howells1-4/+6
Reapply the fix from: 30b2b2196d6e ("cifs: do not include page data when checking signature") that got lost in the iteratorisation of the cifs driver. Fixes: d08089f649a0 ("cifs: Change the I/O paths to use an iterator rather than a page list") Acked-by: Paulo Alcantara (SUSE) <pc@manguebit.com> Reported-by: Paulo Alcantara <pc@manguebit.com> Signed-off-by: David Howells <dhowells@redhat.com> cc: Paulo Alcantara <pc@cjr.nz> cc: Shyam Prasad N <nspmangalore@gmail.com> cc: Bharath S M <bharathsm@microsoft.com> cc: Enzo Matsumiya <ematsumiya@suse.de> cc: linux-cifs@vger.kernel.org Signed-off-by: Steve French <stfrench@microsoft.com>
2023-04-19cifs: Fix unbuffered readDavid Howells1-4/+0
If read() is done in an unbuffered manner, such that, say, cifs_strict_readv() goes through cifs_user_readv() and thence __cifs_readv(), it doesn't recognise the EOF and keeps indicating to userspace that it returning full buffers of data. This is due to ctx->iter being advanced in cifs_send_async_read() as the buffer is split up amongst a number of rdata objects. The iterator count is then used in collect_uncached_read_data() in the non-DIO case to set the total length read - and thus the return value of sys_read(). But since the iterator normally gets used up completely during splitting, ctx->total_len gets overridden to the full amount. However, prior to that in collect_uncached_read_data(), we've gone through the list of rdatas and added up the amount of data we actually received (which we then throw away). Fix this by removing the bit that overrides the amount read in the non-DIO case and just going with the total added up in the aforementioned loop. This was observed by mounting a cifs share with multiple channels, e.g.: mount //192.168.6.1/test /test/ -o user=shares,pass=...,max_channels=6 and then reading a 1MiB file on the share: strace cat /xfstest.test/1M >/dev/null Through strace, the same data can be seen being read again and again. Fixes: d08089f649a0 ("cifs: Change the I/O paths to use an iterator rather than a page list") Signed-off-by: David Howells <dhowells@redhat.com> Acked-by: Paulo Alcantara (SUSE) <pc@manguebit.com> cc: Jérôme Glisse <jglisse@redhat.com> cc: Long Li <longli@microsoft.com> cc: Enzo Matsumiya <ematsumiya@suse.de> cc: Shyam Prasad N <nspmangalore@gmail.com> cc: Rohith Surabattula <rohiths.msft@gmail.com> cc: Jeff Layton <jlayton@kernel.org> cc: linux-cifs@vger.kernel.org Signed-off-by: Steve French <stfrench@microsoft.com>
2023-04-19nilfs2: initialize unused bytes in segment summary blocksRyusuke Konishi1-0/+20
Syzbot still reports uninit-value in nilfs_add_checksums_on_logs() for KMSAN enabled kernels after applying commit 7397031622e0 ("nilfs2: initialize "struct nilfs_binfo_dat"->bi_pad field"). This is because the unused bytes at the end of each block in segment summaries are not initialized. So this fixes the issue by padding the unused bytes with null bytes. Link: https://lkml.kernel.org/r/20230417173513.12598-1-konishi.ryusuke@gmail.com Signed-off-by: Ryusuke Konishi <konishi.ryusuke@gmail.com> Tested-by: Ryusuke Konishi <konishi.ryusuke@gmail.com> Reported-by: syzbot+048585f3f4227bb2b49b@syzkaller.appspotmail.com Link: https://syzkaller.appspot.com/bug?extid=048585f3f4227bb2b49b Cc: Alexander Potapenko <glider@google.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-04-19mm: page_alloc: skip regions with hugetlbfs pages when allocating 1G pagesMel Gorman1-0/+3
A bug was reported by Yuanxi Liu where allocating 1G pages at runtime is taking an excessive amount of time for large amounts of memory. Further testing allocating huge pages that the cost is linear i.e. if allocating 1G pages in batches of 10 then the time to allocate nr_hugepages from 10->20->30->etc increases linearly even though 10 pages are allocated at each step. Profiles indicated that much of the time is spent checking the validity within already existing huge pages and then attempting a migration that fails after isolating the range, draining pages and a whole lot of other useless work. Commit eb14d4eefdc4 ("mm,page_alloc: drop unnecessary checks from pfn_range_valid_contig") removed two checks, one which ignored huge pages for contiguous allocations as huge pages can sometimes migrate. While there may be value on migrating a 2M page to satisfy a 1G allocation, it's potentially expensive if the 1G allocation fails and it's pointless to try moving a 1G page for a new 1G allocation or scan the tail pages for valid PFNs. Reintroduce the PageHuge check and assume any contiguous region with hugetlbfs pages is unsuitable for a new 1G allocation. The hpagealloc test allocates huge pages in batches and reports the average latency per page over time. This test happens just after boot when fragmentation is not an issue. Units are in milliseconds. hpagealloc 6.3.0-rc6 6.3.0-rc6 6.3.0-rc6 vanilla hugeallocrevert-v1r1 hugeallocsimple-v1r2 Min Latency 26.42 ( 0.00%) 5.07 ( 80.82%) 18.94 ( 28.30%) 1st-qrtle Latency 356.61 ( 0.00%) 5.34 ( 98.50%) 19.85 ( 94.43%) 2nd-qrtle Latency 697.26 ( 0.00%) 5.47 ( 99.22%) 20.44 ( 97.07%) 3rd-qrtle Latency 972.94 ( 0.00%) 5.50 ( 99.43%) 20.81 ( 97.86%) Max-1 Latency 26.42 ( 0.00%) 5.07 ( 80.82%) 18.94 ( 28.30%) Max-5 Latency 82.14 ( 0.00%) 5.11 ( 93.78%) 19.31 ( 76.49%) Max-10 Latency 150.54 ( 0.00%) 5.20 ( 96.55%) 19.43 ( 87.09%) Max-90 Latency 1164.45 ( 0.00%) 5.53 ( 99.52%) 20.97 ( 98.20%) Max-95 Latency 1223.06 ( 0.00%) 5.55 ( 99.55%) 21.06 ( 98.28%) Max-99 Latency 1278.67 ( 0.00%) 5.57 ( 99.56%) 22.56 ( 98.24%) Max Latency 1310.90 ( 0.00%) 8.06 ( 99.39%) 26.62 ( 97.97%) Amean Latency 678.36 ( 0.00%) 5.44 * 99.20%* 20.44 * 96.99%* 6.3.0-rc6 6.3.0-rc6 6.3.0-rc6 vanilla revert-v1 hugeallocfix-v2 Duration User 0.28 0.27 0.30 Duration System 808.66 17.77 35.99 Duration Elapsed 830.87 18.08 36.33 The vanilla kernel is poor, taking up to 1.3 second to allocate a huge page and almost 10 minutes in total to run the test. Reverting the problematic commit reduces it to 8ms at worst and the patch takes 26ms. This patch fixes the main issue with skipping huge pages but leaves the page_count() out because a page with an elevated count potentially can migrate. BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=217022 Link: https://lkml.kernel.org/r/20230414141429.pwgieuwluxwez3rj@techsingularity.net Fixes: eb14d4eefdc4 ("mm,page_alloc: drop unnecessary checks from pfn_range_valid_contig") Signed-off-by: Mel Gorman <mgorman@techsingularity.net> Reported-by: Yuanxi Liu <y.liu@naruida.com> Acked-by: Vlastimil Babka <vbabka@suse.cz> Reviewed-by: David Hildenbrand <david@redhat.com> Acked-by: Michal Hocko <mhocko@suse.com> Reviewed-by: Oscar Salvador <osalvador@suse.de> Cc: Matthew Wilcox <willy@infradead.org> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-04-19mm/mmap: regression fix for unmapped_area{_topdown}Liam R. Howlett1-5/+43
The maple tree limits the gap returned to a window that specifically fits what was asked. This may not be optimal in the case of switching search directions or a gap that does not satisfy the requested space for other reasons. Fix the search by retrying the operation and limiting the search window in the rare occasion that a conflict occurs. Link: https://lkml.kernel.org/r/20230414185919.4175572-1-Liam.Howlett@oracle.com Fixes: 3499a13168da ("mm/mmap: use maple tree for unmapped_area{_topdown}") Signed-off-by: Liam R. Howlett <Liam.Howlett@oracle.com> Reported-by: Rick Edgecombe <rick.p.edgecombe@intel.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-04-19maple_tree: fix mas_empty_area() searchLiam R. Howlett1-9/+11
The internal function of mas_awalk() was incorrectly skipping the last entry in a node, which could potentially be NULL. This is only a problem for the left-most node in the tree - otherwise that NULL would not exist. Fix mas_awalk() by using the metadata to obtain the end of the node for the loop and the logical pivot as apposed to the raw pivot value. Link: https://lkml.kernel.org/r/20230414145728.4067069-2-Liam.Howlett@oracle.com Fixes: 54a611b60590 ("Maple Tree: add new data structure") Signed-off-by: Liam R. Howlett <Liam.Howlett@oracle.com> Reported-by: Rick Edgecombe <rick.p.edgecombe@intel.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-04-19maple_tree: make maple state reusable after mas_empty_area_rev()Liam R. Howlett1-14/+13
Stop using maple state min/max for the range by passing through pointers for those values. This will allow the maple state to be reused without resetting. Also add some logic to fail out early on searching with invalid arguments. Link: https://lkml.kernel.org/r/20230414145728.4067069-1-Liam.Howlett@oracle.com Fixes: 54a611b60590 ("Maple Tree: add new data structure") Signed-off-by: Liam R. Howlett <Liam.Howlett@oracle.com> Reported-by: Rick Edgecombe <rick.p.edgecombe@intel.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-04-19mm: kmsan: handle alloc failures in kmsan_ioremap_page_range()Alexander Potapenko3-19/+59
Similarly to kmsan_vmap_pages_range_noflush(), kmsan_ioremap_page_range() must also properly handle allocation/mapping failures. In the case of such, it must clean up the already created metadata mappings and return an error code, so that the error can be propagated to ioremap_page_range(). Without doing so, KMSAN may silently fail to bring the metadata for the page range into a consistent state, which will result in user-visible crashes when trying to access them. Link: https://lkml.kernel.org/r/20230413131223.4135168-2-glider@google.com Fixes: b073d7f8aee4 ("mm: kmsan: maintain KMSAN metadata for page operations") Signed-off-by: Alexander Potapenko <glider@google.com> Reported-by: Dipanjan Das <mail.dipanjan.das@gmail.com> Link: https://lore.kernel.org/linux-mm/CANX2M5ZRrRA64k0hOif02TjmY9kbbO2aCBPyq79es34RXZ=cAw@mail.gmail.com/ Reviewed-by: Marco Elver <elver@google.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Uladzislau Rezki (Sony) <urezki@gmail.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-04-19mm: kmsan: handle alloc failures in kmsan_vmap_pages_range_noflush()Alexander Potapenko3-19/+34
As reported by Dipanjan Das, when KMSAN is used together with kernel fault injection (or, generally, even without the latter), calls to kcalloc() or __vmap_pages_range_noflush() may fail, leaving the metadata mappings for the virtual mapping in an inconsistent state. When these metadata mappings are accessed later, the kernel crashes. To address the problem, we return a non-zero error code from kmsan_vmap_pages_range_noflush() in the case of any allocation/mapping failure inside it, and make vmap_pages_range_noflush() return an error if KMSAN fails to allocate the metadata. This patch also removes KMSAN_WARN_ON() from vmap_pages_range_noflush(), as these allocation failures are not fatal anymore. Link: https://lkml.kernel.org/r/20230413131223.4135168-1-glider@google.com Fixes: b073d7f8aee4 ("mm: kmsan: maintain KMSAN metadata for page operations") Signed-off-by: Alexander Potapenko <glider@google.com> Reported-by: Dipanjan Das <mail.dipanjan.das@gmail.com> Link: https://lore.kernel.org/linux-mm/CANX2M5ZRrRA64k0hOif02TjmY9kbbO2aCBPyq79es34RXZ=cAw@mail.gmail.com/ Reviewed-by: Marco Elver <elver@google.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Uladzislau Rezki (Sony) <urezki@gmail.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-04-19tools/Makefile: do missed s/vm/mm/SeongJae Park1-7/+7
Commit 799fb82aa132 ("tools/vm: rename tools/vm to tools/mm") missed renaming 'vm' in 'tools/Makefile' to 'mm'. As a result, 'make clean' under 'tools/' directory fails as below: $ make -C tools clean DESCEND vm make[1]: Entering directory '/linux/tools/vm' make[1]: *** No rule to make target 'clean'. Stop. make[1]: Leaving directory '/linux/tools/vm' make: *** [Makefile:173: vm_clean] Error 2 make: Leaving directory '/linux/tools' Do the missed rename. Link: https://lkml.kernel.org/r/20230415203110.13858-1-sj@kernel.org Fixes: 799fb82aa132 ("tools/vm: rename tools/vm to tools/mm") Signed-off-by: SeongJae Park <sj@kernel.org> Reported-by: Ricardo Pardini <ricardo@pardini.net> Link: https://lore.kernel.org/linux-mm/20230415202454.13558-1-sj@kernel.org/ Tested-by: Ricardo Pardini <ricardo@pardini.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-04-19mm: fix memory leak on mm_init error handlingMathieu Desnoyers1-0/+1
commit f1a7941243c1 ("mm: convert mm's rss stats into percpu_counter") introduces a memory leak by missing a call to destroy_context() when a percpu_counter fails to allocate. Before introducing the per-cpu counter allocations, init_new_context() was the last call that could fail in mm_init(), and thus there was no need to ever invoke destroy_context() in the error paths. Adding the following percpu counter allocations adds error paths after init_new_context(), which means its associated destroy_context() needs to be called when percpu counters fail to allocate. Link: https://lkml.kernel.org/r/20230330133822.66271-1-mathieu.desnoyers@efficios.com Fixes: f1a7941243c1 ("mm: convert mm's rss stats into percpu_counter") Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Acked-by: Shakeel Butt <shakeelb@google.com> Cc: Marek Szyprowski <m.szyprowski@samsung.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-04-19mm/page_alloc: fix potential deadlock on zonelist_update_seq seqlockTetsuo Handa1-0/+16
syzbot is reporting circular locking dependency which involves zonelist_update_seq seqlock [1], for this lock is checked by memory allocation requests which do not need to be retried. One deadlock scenario is kmalloc(GFP_ATOMIC) from an interrupt handler. CPU0 ---- __build_all_zonelists() { write_seqlock(&zonelist_update_seq); // makes zonelist_update_seq.seqcount odd // e.g. timer interrupt handler runs at this moment some_timer_func() { kmalloc(GFP_ATOMIC) { __alloc_pages_slowpath() { read_seqbegin(&zonelist_update_seq) { // spins forever because zonelist_update_seq.seqcount is odd } } } } // e.g. timer interrupt handler finishes write_sequnlock(&zonelist_update_seq); // makes zonelist_update_seq.seqcount even } This deadlock scenario can be easily eliminated by not calling read_seqbegin(&zonelist_update_seq) from !__GFP_DIRECT_RECLAIM allocation requests, for retry is applicable to only __GFP_DIRECT_RECLAIM allocation requests. But Michal Hocko does not know whether we should go with this approach. Another deadlock scenario which syzbot is reporting is a race between kmalloc(GFP_ATOMIC) from tty_insert_flip_string_and_push_buffer() with port->lock held and printk() from __build_all_zonelists() with zonelist_update_seq held. CPU0 CPU1 ---- ---- pty_write() { tty_insert_flip_string_and_push_buffer() { __build_all_zonelists() { write_seqlock(&zonelist_update_seq); build_zonelists() { printk() { vprintk() { vprintk_default() { vprintk_emit() { console_unlock() { console_flush_all() { console_emit_next_record() { con->write() = serial8250_console_write() { spin_lock_irqsave(&port->lock, flags); tty_insert_flip_string() { tty_insert_flip_string_fixed_flag() { __tty_buffer_request_room() { tty_buffer_alloc() { kmalloc(GFP_ATOMIC | __GFP_NOWARN) { __alloc_pages_slowpath() { zonelist_iter_begin() { read_seqbegin(&zonelist_update_seq); // spins forever because zonelist_update_seq.seqcount is odd spin_lock_irqsave(&port->lock, flags); // spins forever because port->lock is held } } } } } } } } spin_unlock_irqrestore(&port->lock, flags); // message is printed to console spin_unlock_irqrestore(&port->lock, flags); } } } } } } } } } write_sequnlock(&zonelist_update_seq); } } } This deadlock scenario can be eliminated by preventing interrupt context from calling kmalloc(GFP_ATOMIC) and preventing printk() from calling console_flush_all() while zonelist_update_seq.seqcount is odd. Since Petr Mladek thinks that __build_all_zonelists() can become a candidate for deferring printk() [2], let's address this problem by disabling local interrupts in order to avoid kmalloc(GFP_ATOMIC) and disabling synchronous printk() in order to avoid console_flush_all() . As a side effect of minimizing duration of zonelist_update_seq.seqcount being odd by disabling synchronous printk(), latency at read_seqbegin(&zonelist_update_seq) for both !__GFP_DIRECT_RECLAIM and __GFP_DIRECT_RECLAIM allocation requests will be reduced. Although, from lockdep perspective, not calling read_seqbegin(&zonelist_update_seq) (i.e. do not record unnecessary locking dependency) from interrupt context is still preferable, even if we don't allow calling kmalloc(GFP_ATOMIC) inside write_seqlock(&zonelist_update_seq)/write_sequnlock(&zonelist_update_seq) section... Link: https://lkml.kernel.org/r/8796b95c-3da3-5885-fddd-6ef55f30e4d3@I-love.SAKURA.ne.jp Fixes: 3d36424b3b58 ("mm/page_alloc: fix race condition between build_all_zonelists and page allocation") Link: https://lkml.kernel.org/r/ZCrs+1cDqPWTDFNM@alley [2] Reported-by: syzbot <syzbot+223c7461c58c58a4cb10@syzkaller.appspotmail.com> Link: https://syzkaller.appspot.com/bug?extid=223c7461c58c58a4cb10 [1] Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Acked-by: Michal Hocko <mhocko@suse.com> Acked-by: Mel Gorman <mgorman@techsingularity.net> Cc: Petr Mladek <pmladek@suse.com> Cc: David Hildenbrand <david@redhat.com> Cc: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Cc: John Ogness <john.ogness@linutronix.de> Cc: Patrick Daly <quic_pdaly@quicinc.com> Cc: Sergey Senozhatsky <senozhatsky@chromium.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-04-19kernel/sys.c: fix and improve control flow in __sys_setres[ug]id()Ondrej Mosnacek1-29/+40
Linux Security Modules (LSMs) that implement the "capable" hook will usually emit an access denial message to the audit log whenever they "block" the current task from using the given capability based on their security policy. The occurrence of a denial is used as an indication that the given task has attempted an operation that requires the given access permission, so the callers of functions that perform LSM permission checks must take care to avoid calling them too early (before it is decided if the permission is actually needed to perform the requested operation). The __sys_setres[ug]id() functions violate this convention by first calling ns_capable_setid() and only then checking if the operation requires the capability or not. It means that any caller that has the capability granted by DAC (task's capability set) but not by MAC (LSMs) will generate a "denied" audit record, even if is doing an operation for which the capability is not required. Fix this by reordering the checks such that ns_capable_setid() is checked last and -EPERM is returned immediately if it returns false. While there, also do two small optimizations: * move the capability check before prepare_creds() and * bail out early in case of a no-op. Link: https://lkml.kernel.org/r/20230217162154.837549-1-omosnace@redhat.com Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Ondrej Mosnacek <omosnace@redhat.com> Cc: Eric W. Biederman <ebiederm@xmission.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-04-19drm/amd/display: fix a divided-by-zero errorAlex Hung1-0/+4
[Why & How] timing.dsc_cfg.num_slices_v can be zero and it is necessary to check before using it. This fixes the error "divide error: 0000 [#1] PREEMPT SMP NOPTI". Reviewed-by: Aurabindo Pillai <Aurabindo.Pillai@amd.com> Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com> Signed-off-by: Alex Hung <alex.hung@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2023-04-19drm/amd/display: limit timing for single dimm memoryDaniel Miess1-0/+20
[Why] 1. It could hit bandwidth limitdation under single dimm memory when connecting 8K external monitor. 2. IsSupportedVidPn got validation failed with 2K240Hz eDP + 8K24Hz external monitor. 3. It's better to filter out such combination in EnumVidPnCofuncModality 4. For short term, filter out in dc bandwidth validation. [How] Force 2K@240Hz+8K@24Hz timing validation false in dc. Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com> Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com> Signed-off-by: Daniel Miess <Daniel.Miess@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2023-04-19drm/amd/display: set dcn315 lb bpp to 48Dmytro Laktyushkin1-1/+1
[Why & How] Fix a typo for dcn315 line buffer bpp. Reviewed-by: Jun Lei <Jun.Lei@amd.com> Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com> Signed-off-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2023-04-19drm/amdgpu: Fix desktop freezed after gpu-resetAlan Liu2-3/+17
[Why] After gpu-reset, sometimes the driver fails to enable vblank irq, causing flip_done timed out and the desktop freezed. During gpu-reset, we disable and enable vblank irq in dm_suspend() and dm_resume(). Later on in amdgpu_irq_gpu_reset_resume_helper(), we check irqs' refcount and decide to enable or disable the irqs again. However, we have 2 sets of API for controling vblank irq, one is dm_vblank_get/put() and another is amdgpu_irq_get/put(). Each API has its own refcount and flag to store the state of vblank irq, and they are not synchronized. In drm we use the first API to control vblank irq but in amdgpu_irq_gpu_reset_resume_helper() we use the second set of API. The failure happens when vblank irq was enabled by dm_vblank_get() before gpu-reset, we have vblank->enabled true. However, during gpu-reset, in amdgpu_irq_gpu_reset_resume_helper() vblank irq's state checked from amdgpu_irq_update() is DISABLED. So finally it disables vblank irq again. After gpu-reset, if there is a cursor plane commit, the driver will try to enable vblank irq by calling drm_vblank_enable(), but the vblank->enabled is still true, so it fails to turn on vblank irq and causes flip_done can't be completed in vblank irq handler and desktop become freezed. [How] Combining the 2 vblank control APIs by letting drm's API finally calls amdgpu_irq's API, so the irq's refcount and state of both APIs can be synchronized. Also add a check to prevent refcount from being less then 0 in amdgpu_irq_put(). v2: - Add warning in amdgpu_irq_enable() if the irq is already disabled. - Call dc_interrupt_set() in dm_set_vblank() to avoid refcount change if it is in gpu-reset. v3: - Improve commit message and code comments. Signed-off-by: Alan Liu <HaoPing.Liu@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2023-04-18veth: take into account peer device for NETDEV_XDP_ACT_NDO_XMIT xdp_features ↵Lorenzo Bianconi1-6/+11
flag For veth pairs, NETDEV_XDP_ACT_NDO_XMIT is supported by the current device if the peer one is running a XDP program or if it has GRO enabled. Fix the xdp_features flags reporting considering peer device and not current one for NETDEV_XDP_ACT_NDO_XMIT. Fixes: fccca038f300 ("veth: take into account device reconfiguration for xdp_features flag") Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Link: https://lore.kernel.org/r/4f1ca6f6f6b42ae125bfdb5c7782217c83968b2e.1681767806.git.lorenzo@kernel.org Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2023-04-18Merge tag 'mmc-v6.3-rc3' of ↵Linus Torvalds2-3/+4
git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc Pull MMC fixes from Ulf Hansson: "MMC host: - sdhci_am654: Fix support for UHS-I SDR12 and SDR25 speed modes MEMSTICK: - Fix memory leak if card device never gets registered" * tag 'mmc-v6.3-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc: memstick: fix memory leak if card device is never registered mmc: sdhci_am654: Set HIGH_SPEED_ENA for SDR12 and SDR25
2023-04-18KVM: arm64: Make vcpu flag updates non-preemptibleMarc Zyngier1-1/+18
Per-vcpu flags are updated using a non-atomic RMW operation. Which means it is possible to get preempted between the read and write operations. Another interesting thing to note is that preemption also updates flags, as we have some flag manipulation in both the load and put operations. It is thus possible to lose information communicated by either load or put, as the preempted flag update will overwrite the flags when the thread is resumed. This is specially critical if either load or put has stored information which depends on the physical CPU the vcpu runs on. This results in really elusive bugs, and kudos must be given to Mostafa for the long hours of debugging, and finally spotting the problem. Fix it by disabling preemption during the RMW operation, which ensures that the state stays consistent. Also upgrade vcpu_get_flag path to use READ_ONCE() to make sure the field is always atomically accessed. Fixes: e87abb73e594 ("KVM: arm64: Add helpers to manipulate vcpu flags among a set") Reported-by: Mostafa Saleh <smostafa@google.com> Signed-off-by: Marc Zyngier <maz@kernel.org> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20230418125737.2327972-1-maz@kernel.org Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
2023-04-18Merge tag 'arm-fixes-6.3-3' of ↵Linus Torvalds37-98/+88
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull ARM SoC fixes from Arnd Bergmann: "There are a number of updates for devicetree files for Qualcomm, Rockchips, and NXP i.MX platforms, addressing mistakes in the DT contents: - Wrong GPIO polarity on some boards - Lower SD card interface speed for better stability - Incorrect power supply, clock, pmic, cache properties - Disable broken hbr3 on sc7280-herobrine - Devicetree warning fixes The only other changes are: - A regression fix for the Amlogic performance monitoring unit driver, along with two related DT changes. - imx_v6_v7_defconfig enables PCI support again. - Trivial fixes for tee, optee and psci firmware drivers, addressing compiler warning and error output" * tag 'arm-fixes-6.3-3' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (32 commits) firmware/psci: demote suspend-mode warning to info level arm64: dts: qcom: sc7280: remove hbr3 support on herobrine boards ARM: imx_v6_v7_defconfig: Fix unintentional disablement of PCI arm64: dts: rockchip: correct panel supplies on some rk3326 boards arm64: dts: rockchip: use just "port" in panel on RockPro64 arm64: dts: rockchip: use just "port" in panel on Pinebook Pro ARM: dts: imx6ull-colibri: Remove unnecessary #address-cells/#size-cells ARM: dts: imx7d-remarkable2: Remove unnecessary #address-cells/#size-cells arm64: dts: imx8mp-verdin: correct off-on-delay arm64: dts: imx8mm-verdin: correct off-on-delay arm64: dts: imx8mm-evk: correct pmic clock source arm64: dts: qcom: sc8280xp-pmics: fix pon compatible and registers arm64: dts: rockchip: Remove non-existing pwm-delay-us property arm64: dts: rockchip: Add clk_rtc_32k to Anbernic xx3 Devices tee: Pass a pointer to virt_to_page() perf/amlogic: adjust register offsets arm64: dts: meson-g12-common: resolve conflict between canvas & pmu arm64: dts: meson-g12-common: specify full DMC range arm64: dts: imx8mp: fix address length for LCDIF2 riscv: dts: canaan: drop invalid spi-max-frequency ...
2023-04-18LoongArch: module: set section addresses to 0x0Huacai Chen1-4/+4
These got*, plt* and .text.ftrace_trampoline sections specified for LoongArch have non-zero addressses. Non-zero section addresses in a relocatable ELF would confuse GDB when it tries to compute the section offsets and it ends up printing wrong symbol addresses. Therefore, set them to zero, which mirrors the change in commit 5d8591bc0fbaeb6ded ("arm64 module: set plt* section addresses to 0x0"). Cc: stable@vger.kernel.org Reviewed-by: Guo Ren <guoren@kernel.org> Signed-off-by: Chong Qiao <qiaochong@loongson.cn> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
generated by cgit v1.2.3 (git 2.39.0) at 2024-08-04 20:18:14 +0300