| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Add sparse memory vmemmap support for LoongArch. SPARSEMEM_VMEMMAP uses a
virtually mapped memmap to optimise pfn_to_page and page_to_pfn
operations. This is the most efficient option when sufficient kernel
resources are available.
Link: https://lkml.kernel.org/r/20221027125253.3458989-3-chenhuacai@loongson.cn
Signed-off-by: Min Zhou <zhoumin@loongson.cn>
Signed-off-by: Feiyang Chen <chenfeiyang@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Dinh Nguyen <dinguyen@kernel.org>
Cc: Guo Ren <guoren@kernel.org>
Cc: Jiaxun Yang <jiaxun.yang@flygoat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Philippe Mathieu-Daudé <philmd@linaro.org>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Will Deacon <will@kernel.org>
Cc: Xuefeng Li <lixuefeng@loongson.cn>
Cc: Xuerui Wang <kernel@xen0n.name>
Cc: Muchun Song <songmuchun@bytedance.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Patch series "mm/sparse-vmemmap: Generalise helpers and enable for
LoongArch", v14.
This series is in order to enable sparse-vmemmap for LoongArch. But
LoongArch cannot use generic helpers directly because MIPS&LoongArch need
to call pgd_init()/pud_init()/pmd_init() when populating page tables. So
we adjust the prototypes of p?d_init() to make generic helpers can call
them, then enable sparse-vmemmap with generic helpers, and to be further,
generalise vmemmap_populate_hugepages() for ARM64, X86 and LoongArch.
This patch (of 4):
We are preparing to add sparse vmemmap support to LoongArch. MIPS and
LoongArch need to call pgd_init()/pud_init()/pmd_init() when populating
page tables, so adjust their prototypes to make generic helpers can call
them.
NIOS2 declares pmd_init() but doesn't use, just remove it to avoid build
errors.
Link: https://lkml.kernel.org/r/20221027125253.3458989-1-chenhuacai@loongson.cn
Link: https://lkml.kernel.org/r/20221027125253.3458989-2-chenhuacai@loongson.cn
Signed-off-by: Feiyang Chen <chenfeiyang@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Dinh Nguyen <dinguyen@kernel.org>
Cc: Guo Ren <guoren@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Will Deacon <will@kernel.org>
Cc: Xuefeng Li <lixuefeng@loongson.cn>
Cc: Xuerui Wang <kernel@xen0n.name>
Cc: Min Zhou <zhoumin@loongson.cn>
Cc: Muchun Song <songmuchun@bytedance.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
In certain cases (e.g. when handling a softirq)
__msan_instrument_asm_store(&var, sizeof(var)) may be called with from
within KMSAN runtime, but later the value of @var is used with
!kmsan_in_runtime(), leading to false positives.
Because kmsan_internal_unpoison_memory() doesn't take locks, it should be
fine to call it without kmsan_in_runtime() checks, which fixes the
mentioned false positives.
Link: https://lkml.kernel.org/r/20221128094541.2645890-2-glider@google.com
Signed-off-by: Alexander Potapenko <glider@google.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Eric Biggers <ebiggers@kernel.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Marco Elver <elver@google.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Lockdep and KMSAN used to play badly together, causing deadlocks when
KMSAN instrumentation of lockdep.c called lockdep functions recursively.
Looks like this is no more the case, and a kernel can run (yet slower)
with both KMSAN and lockdep enabled. This patch should fix false
positives on wq_head->lock->dep_map, which KMSAN used to consider
uninitialized because of lockdep.c not being instrumented.
Link: https://lore.kernel.org/lkml/Y3b9AAEKp2Vr3e6O@sol.localdomain/
Link: https://lkml.kernel.org/r/20221128094541.2645890-1-glider@google.com
Signed-off-by: Alexander Potapenko <glider@google.com>
Reported-by: Eric Biggers <ebiggers@kernel.org>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Marco Elver <elver@google.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Return value from ptep_get_and_clear_full() directly instead of taking
this in another redundant variable.
Link: https://lkml.kernel.org/r/202211282107437343474@zte.com.cn
Signed-off-by: zhang songyi <zhang.songyi@zte.com.cn>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
generic_fadvise() sets endbyte = -1 to specify end of file (i.e. if
length == 0 is passed from userspace). Most other callers to
filemap_fdatawrite_range() use LLONG_MAX for this purpose, particularly if
they also call fdatawait_range() (which requires end >= start). For
example, sync_file_range(), vfs_fsync() (where the range is passed down
through per-fs ->fsync() callbacks), filemap_flush(), etc.
generic_fadvise() does not currently wait on writeback, but fix the call
up to be consistent with other callers.
Link: https://lkml.kernel.org/r/20221128155632.3950447-3-bfoster@redhat.com
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Patch series "filemap: skip write and wait if end offset precedes start",
v2.
A fix for the odd write and wait behavior described in the patch 1 commit
log. Technically patch 1 could simply remove the check rather than lift
it into the callers, but this seemed a bit more user friendly to me.
Patch 2 is appended after observation that fadvise() interacted poorly
with the v1 patch. This is no longer a problem with v2, making patch 2
purely a cleanup.
This series survived both fstests and ltp regression runs without
observable problems. I had (end < start) warning checks in each relevant
function, with fadvise() being the only caller that triggered them. That
said, I dropped the warnings after testing because there seemed to much
potential for noise from the various other callers.
This patch (of 2):
A call to file[map]_write_and_wait_range() with an end offset that
precedes the start offset but happens to land in the same page can trigger
writeback submission but fails to wait on the submitted page. Writeback
submission occurs because __filemap_fdatawrite_range() passes both offsets
down into write_cache_pages(), which rounds down to page indexes before it
starts processing writeback. However, __filemap_fdatawait_range()
immediately returns if the byte-granular end offset precedes the start
offset.
This behavior was observed in the form of unpredictable latency from a
frequent write and wait call with incorrect parameters. The behavior gave
the impression that the fdatawait path might occasionally fail to wait on
writeback, but further investigation showed the latency was from
write_cache_pages() waiting on writeback state to clear for a page already
under writeback. Therefore, this indicated that fdatawait actually never
waits on writeback in this particular situation.
The byte granular check in __filemap_fdatawait_range() goes all the way
back to the old wait_on_page_writeback() helper. It originally used page
offsets and so would have waited in this problematic case. That changed
to byte granularity file offsets in commit 94004ed726f3 ("kill
wait_on_page_writeback_range"), which subtly changed this behavior. The
check itself has become somewhat redundant since the error checking code
that used to follow the wait loop (at the time of the aforementioned
commit) has now been removed and lifted into the higher level callers.
Therefore, we can restore historical fdatawait behavior by simply removing
the check. Since the current fdatawait behavior has been in place for
quite some time and is consistent with other interfaces that use file
offsets, instead lift the check into the file[map]_write_and_wait_range()
helpers to provide consistent behavior between the write and wait.
Link: https://lkml.kernel.org/r/20221128155632.3950447-1-bfoster@redhat.com
Link: https://lkml.kernel.org/r/20221128155632.3950447-2-bfoster@redhat.com
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
This commit adds the writeback mechanism for zsmalloc, analogous to the
zbud allocator. Zsmalloc will attempt to determine the coldest zspage
(i.e least recently used) in the pool, and attempt to write back all the
stored compressed objects via the pool's evict handler.
Link: https://lkml.kernel.org/r/20221128191616.1261026-7-nphamcs@gmail.com
Signed-off-by: Nhat Pham <nphamcs@gmail.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Reviewed-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Cc: Dan Streetman <ddstreet@ieee.org>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Nitin Gupta <ngupta@vflare.org>
Cc: Seth Jennings <sjenning@redhat.com>
Cc: Vitaly Wool <vitaly.wool@konsulko.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
This adds a new field to zs_pool to store evict handlers for writeback,
analogous to the zbud allocator.
Link: https://lkml.kernel.org/r/20221128191616.1261026-6-nphamcs@gmail.com
Signed-off-by: Nhat Pham <nphamcs@gmail.com>
Acked-by: Minchan Kim <minchan@kernel.org>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Reviewed-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Cc: Dan Streetman <ddstreet@ieee.org>
Cc: Nitin Gupta <ngupta@vflare.org>
Cc: Seth Jennings <sjenning@redhat.com>
Cc: Vitaly Wool <vitaly.wool@konsulko.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
This helps determines the coldest zspages as candidates for writeback.
Link: https://lkml.kernel.org/r/20221128191616.1261026-5-nphamcs@gmail.com
Signed-off-by: Nhat Pham <nphamcs@gmail.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Reviewed-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Cc: Dan Streetman <ddstreet@ieee.org>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Nitin Gupta <ngupta@vflare.org>
Cc: Seth Jennings <sjenning@redhat.com>
Cc: Vitaly Wool <vitaly.wool@konsulko.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Currently, zsmalloc has a hierarchy of locks, which includes a pool-level
migrate_lock, and a lock for each size class. We have to obtain both
locks in the hotpath in most cases anyway, except for zs_malloc. This
exception will no longer exist when we introduce a LRU into the zs_pool
for the new writeback functionality - we will need to obtain a pool-level
lock to synchronize LRU handling even in zs_malloc.
In preparation for zsmalloc writeback, consolidate these locks into a
single pool-level lock, which drastically reduces the complexity of
synchronization in zsmalloc.
We have also benchmarked the lock consolidation to see the performance
effect of this change on zram.
First, we ran a synthetic FS workload on a server machine with 36 cores
(same machine for all runs), using
fs_mark -d ../zram1mnt -s 100000 -n 2500 -t 32 -k
before and after for btrfs and ext4 on zram (FS usage is 80%).
Here is the result (unit is file/second):
With lock consolidation (btrfs):
Average: 13520.2, Median: 13531.0, Stddev: 137.5961482019028
Without lock consolidation (btrfs):
Average: 13487.2, Median: 13575.0, Stddev: 309.08283679298665
With lock consolidation (ext4):
Average: 16824.4, Median: 16839.0, Stddev: 89.97388510006668
Without lock consolidation (ext4)
Average: 16958.0, Median: 16986.0, Stddev: 194.7370021336469
As you can see, we observe a 0.3% regression for btrfs, and a 0.9%
regression for ext4. This is a small, barely measurable difference in my
opinion.
For a more realistic scenario, we also tries building the kernel on zram.
Here is the time it takes (in seconds):
With lock consolidation (btrfs):
real
Average: 319.6, Median: 320.0, Stddev: 0.8944271909999159
user
Average: 6894.2, Median: 6895.0, Stddev: 25.528415540334656
sys
Average: 521.4, Median: 522.0, Stddev: 1.51657508881031
Without lock consolidation (btrfs):
real
Average: 319.8, Median: 320.0, Stddev: 0.8366600265340756
user
Average: 6896.6, Median: 6899.0, Stddev: 16.04057355583023
sys
Average: 520.6, Median: 521.0, Stddev: 1.140175425099138
With lock consolidation (ext4):
real
Average: 320.0, Median: 319.0, Stddev: 1.4142135623730951
user
Average: 6896.8, Median: 6878.0, Stddev: 28.621670111997307
sys
Average: 521.2, Median: 521.0, Stddev: 1.7888543819998317
Without lock consolidation (ext4)
real
Average: 319.6, Median: 319.0, Stddev: 0.8944271909999159
user
Average: 6886.2, Median: 6887.0, Stddev: 16.93221781102523
sys
Average: 520.4, Median: 520.0, Stddev: 1.140175425099138
The difference is entirely within the noise of a typical run on zram.
This hardly justifies the complexity of maintaining both the pool lock and
the class lock. In fact, for writeback, we would need to introduce yet
another lock to prevent data races on the pool's LRU, further complicating
the lock handling logic. IMHO, it is just better to collapse all of these
into a single pool-level lock.
Link: https://lkml.kernel.org/r/20221128191616.1261026-4-nphamcs@gmail.com
Signed-off-by: Nhat Pham <nphamcs@gmail.com>
Suggested-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Minchan Kim <minchan@kernel.org>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Reviewed-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Cc: Dan Streetman <ddstreet@ieee.org>
Cc: Nitin Gupta <ngupta@vflare.org>
Cc: Seth Jennings <sjenning@redhat.com>
Cc: Vitaly Wool <vitaly.wool@konsulko.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
There is a lot of provision for flexibility that isn't actually needed or
used. Zswap (the only zpool user) always passes zpool_ops with an .evict
method set. The backends who reclaim only do so for zswap, so they can
also directly call zpool_ops without indirection or checks.
Finally, there is no need to check the retries parameters and bail with
-EINVAL in the reclaim function, when that's called just a few lines below
with a hard-coded 8. There is no need to duplicate the evictable and
sleep_mapped attrs from the driver in zpool_ops.
Link: https://lkml.kernel.org/r/20221128191616.1261026-3-nphamcs@gmail.com
Reviewed-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Signed-off-by: Nhat Pham <nphamcs@gmail.com>
Cc: Dan Streetman <ddstreet@ieee.org>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Nitin Gupta <ngupta@vflare.org>
Cc: Seth Jennings <sjenning@redhat.com>
Cc: Vitaly Wool <vitaly.wool@konsulko.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Patch series "Implement writeback for zsmalloc", v7.
Unlike other zswap allocators such as zbud or z3fold, zsmalloc currently
lacks the writeback mechanism. This means that when the zswap pool is
full, it will simply reject further allocations, and the pages will be
written directly to swap.
This series of patches implements writeback for zsmalloc. When the zswap
pool becomes full, zsmalloc will attempt to evict all the compressed
objects in the least-recently used zspages.
This patch (of 6):
zswap's customary lock order is tree->lock before pool->lock, because the
tree->lock protects the entries' refcount, and the free callbacks in the
backends acquire their respective pool locks to dispatch the backing
object. zsmalloc's map callback takes the pool lock, so zswap must not
grab the tree->lock while a handle is mapped. This currently only happens
during writeback, which isn't implemented for zsmalloc. In preparation
for it, move the tree->lock section out of the mapped entry section
Link: https://lkml.kernel.org/r/20221128191616.1261026-1-nphamcs@gmail.com
Link: https://lkml.kernel.org/r/20221128191616.1261026-2-nphamcs@gmail.com
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Signed-off-by: Nhat Pham <nphamcs@gmail.com>
Reviewed-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Cc: Dan Streetman <ddstreet@ieee.org>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Nitin Gupta <ngupta@vflare.org>
Cc: Seth Jennings <sjenning@redhat.com>
Cc: Vitaly Wool <vitaly.wool@konsulko.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
When MADV_PAGEOUT is called on a private file mapping VMA region, we bail
out early if the process is neither owner nor write capable of the file.
However, this VMA may have both private/shared clean pages and private
dirty pages. The opportunity of paging out the private dirty pages (Anon
pages) is missed. Fix this behavior by allowing private file mappings
pageout further and perform the file access check along with PageAnon()
during page walk.
We observe ~10% improvement in zram usage, thus leaving more available
memory on a 4GB RAM system running Android.
[quic_pkondeti@quicinc.com: v2]
Link: https://lkml.kernel.org/r/1669962597-27724-1-git-send-email-quic_pkondeti@quicinc.com
Link: https://lkml.kernel.org/r/1667971116-12900-1-git-send-email-quic_pkondeti@quicinc.com
Signed-off-by: Pavankumar Kondeti <quic_pkondeti@quicinc.com>
Cc: Charan Teja Kalla <quic_charante@quicinc.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: David Hildenbrand <david@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
"mm_khugepaged_collapse_file" for capturing is_shmem.
Currently, is_shmem is not being captured. Capturing is_shmem is useful
as it can indicate if tmpfs is being used as a backing store instead of
persistent storage. Add the tracepoint in collapse_file() named
"mm_khugepaged_collapse_file" for capturing is_shmem.
[gautammenghani201@gmail.com: swap is_shmem and addr to save space, per Steven Rostedt]
Link: https://lkml.kernel.org/r/20221202201807.182829-1-gautammenghani201@gmail.com
Link: https://lkml.kernel.org/r/20221026052218.148234-1-gautammenghani201@gmail.com
Signed-off-by: Gautam Menghani <gautammenghani201@gmail.com>
Reviewed-by: Steven Rostedt (Google) <rostedt@goodmis.org> [tracing]
Cc: David Hildenbrand <david@redhat.com>
Cc: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Cc: Yang Shi <shy828301@gmail.com>
Cc: Zach O'Keefe <zokeefe@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Fortunately, the last user (KSM) is gone, so let's just remove this rather
special code from generic GUP handling -- especially because KSM never
required the PMD handling as KSM only deals with individual base pages.
[akpm@linux-foundation.org: fix merge snafu]Link: https://lkml.kernel.org/r/20221021101141.84170-10-david@redhat.com
Signed-off-by: David Hildenbrand <david@redhat.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Jason Gunthorpe <jgg@nvidia.com>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Peter Xu <peterx@redhat.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
FOLL_MIGRATION exists only for the purpose of break_ksm(), and actually,
there is not even the need to wait for the migration to finish, we only
want to know if we're dealing with a KSM page.
Using follow_page() just to identify a KSM page overcomplicates GUP code.
Let's use walk_page_range_vma() instead, because we don't actually care
about the page itself, we only need to know a single property -- no need
to even grab a reference.
So, get rid of follow_page() usage such that we can get rid of
FOLL_MIGRATION now and eventually be able to get rid of follow_page() in
the future.
In my setup (AMD Ryzen 9 3900X), running the KSM selftest to test unmerge
performance on 2 GiB (taskset 0x8 ./ksm_tests -D -s 2048), this results in
a performance degradation of ~2% (old: ~5010 MiB/s, new: ~4900 MiB/s). I
don't think we particularly care for now.
Interestingly, the benchmark reduction is due to the single callback.
Adding a second callback (e.g., pud_entry()) reduces the benchmark by
another 100-200 MiB/s.
Link: https://lkml.kernel.org/r/20221021101141.84170-9-david@redhat.com
Signed-off-by: David Hildenbrand <david@redhat.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Jason Gunthorpe <jgg@nvidia.com>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Peter Xu <peterx@redhat.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Let's add walk_page_range_vma(), which is similar to walk_page_vma(),
however, is only interested in a subset of the VMA range.
To be used in KSM code to stop using follow_page() next.
Link: https://lkml.kernel.org/r/20221021101141.84170-8-david@redhat.com
Signed-off-by: David Hildenbrand <david@redhat.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Jason Gunthorpe <jgg@nvidia.com>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Peter Xu <peterx@redhat.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Let's stop breaking COW via a fake write fault and let's use
FAULT_FLAG_UNSHARE instead. This avoids any wrong side effects of the
fake write fault, such as mapping the PTE writable and marking the pte
dirty/softdirty.
Consequently, we will no longer trigger a fake write fault and break COW
without any such side-effects.
Also, this fixes KSM interaction with userfaultfd-wp: when we have a KSM
page that's write-protected by userfaultfd, break_ksm()->handle_mm_fault()
will fail with VM_FAULT_SIGBUS and will simply return in break_ksm() with
0 instead of actually breaking COW.
For now, the KSM unmerge tests can trigger that:
$ sudo ./ksm_functional_tests
TAP version 13
1..3
# [RUN] test_unmerge
ok 1 Pages were unmerged
# [RUN] test_unmerge_discarded
ok 2 Pages were unmerged
# [RUN] test_unmerge_uffd_wp
not ok 3 Pages were unmerged
Bail out! 1 out of 3 tests failed
# Planned tests != run tests (2 != 3)
# Totals: pass:2 fail:1 xfail:0 xpass:0 skip:0 error:0
The warning in dmesg also indicates this wrong handling:
[ 230.096368] FAULT_FLAG_ALLOW_RETRY missing 881
[ 230.100822] CPU: 1 PID: 1643 Comm: ksm-uffd-wp [...]
[ 230.110124] Hardware name: [...]
[ 230.117775] Call Trace:
[ 230.120227] <TASK>
[ 230.122334] dump_stack_lvl+0x44/0x5c
[ 230.126010] handle_userfault.cold+0x14/0x19
[ 230.130281] ? tlb_finish_mmu+0x65/0x170
[ 230.134207] ? uffd_wp_range+0x65/0xa0
[ 230.137959] ? _raw_spin_unlock+0x15/0x30
[ 230.141972] ? do_wp_page+0x50/0x590
[ 230.145551] __handle_mm_fault+0x9f5/0xf50
[ 230.149652] ? mmput+0x1f/0x40
[ 230.152712] handle_mm_fault+0xb9/0x2a0
[ 230.156550] break_ksm+0x141/0x180
[ 230.159964] unmerge_ksm_pages+0x60/0x90
[ 230.163890] ksm_madvise+0x3c/0xb0
[ 230.167295] do_madvise.part.0+0x10c/0xeb0
[ 230.171396] ? do_syscall_64+0x67/0x80
[ 230.175157] __x64_sys_madvise+0x5a/0x70
[ 230.179082] do_syscall_64+0x58/0x80
[ 230.182661] ? do_syscall_64+0x67/0x80
[ 230.186413] entry_SYSCALL_64_after_hwframe+0x63/0xcd
This is primarily a fix for KSM+userfaultfd-wp, however, the fake write
fault was always questionable. As this fix is not easy to backport and
it's not very critical, let's not cc stable.
Link: https://lkml.kernel.org/r/20221021101141.84170-6-david@redhat.com
Fixes: 529b930b87d9 ("userfaultfd: wp: hook userfault handler to write protection fault")
Signed-off-by: David Hildenbrand <david@redhat.com>
Acked-by: Peter Xu <peterx@redhat.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Jason Gunthorpe <jgg@nvidia.com>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
All users -- GUP and KSM -- are gone, let's just remove it.
Link: https://lkml.kernel.org/r/20221021101141.84170-4-david@redhat.com
Signed-off-by: David Hildenbrand <david@redhat.com>
Acked-by: Peter Xu <peterx@redhat.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Jason Gunthorpe <jgg@nvidia.com>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Now that GUP no longer requires VM_FAULT_WRITE, break_ksm() is the sole
remaining user of VM_FAULT_WRITE. As we also want to stop triggering a
fake write fault and instead use FAULT_FLAG_UNSHARE -- similar to
GUP-triggered unsharing when taking a R/O pin on a shared anonymous page
(including KSM pages), let's stop relying on VM_FAULT_WRITE.
Let's rework break_ksm() to not rely on the return value of
handle_mm_fault() anymore to figure out whether COW-breaking was
successful. Simply perform another follow_page() lookup to verify the
result.
While this makes break_ksm() slightly less efficient, we can simplify
handle_mm_fault() a little and easily switch to FAULT_FLAG_UNSHARE without
introducing similar KSM-specific behavior for FAULT_FLAG_UNSHARE.
In my setup (AMD Ryzen 9 3900X), running the KSM selftest to test unmerge
performance on 2 GiB (taskset 0x8 ./ksm_tests -D -s 2048), this results in
a performance degradation of ~4% -- 5% (old: ~5250 MiB/s, new: ~5010
MiB/s).
I don't think that we particularly care about that performance drop when
unmerging. If it ever turns out to be an actual performance issue, we can
think about a better alternative for FAULT_FLAG_UNSHARE -- let's just keep
it simple for now.
Link: https://lkml.kernel.org/r/20221021101141.84170-3-david@redhat.com
Signed-off-by: David Hildenbrand <david@redhat.com>
Acked-by: Peter Xu <peterx@redhat.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Jason Gunthorpe <jgg@nvidia.com>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Let's add a test to measure performance of KSM breaking not triggered via
COW, but triggered by disabling KSM on an area filled with KSM pages via
MADV_UNMERGEABLE.
Link: https://lkml.kernel.org/r/20221021101141.84170-2-david@redhat.com
Signed-off-by: David Hildenbrand <david@redhat.com>
Acked-by: Peter Xu <peterx@redhat.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Jason Gunthorpe <jgg@nvidia.com>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
As Peter points out, the caller passes a single VMA and can just do that
check itself.
And in fact, no existing users rely on test_walk() getting called. So
let's just remove it and make the implementation slightly more efficient.
Link: https://lkml.kernel.org/r/20221021101141.84170-7-david@redhat.com
Signed-off-by: David Hildenbrand <david@redhat.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Jason Gunthorpe <jgg@nvidia.com>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Peter Xu <peterx@redhat.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Patch series "mm/ksm: break_ksm() cleanups and fixes", v2.
This series cleans up and fixes break_ksm(). In summary, we no longer use
fake write faults to break COW but instead FAULT_FLAG_UNSHARE. Further,
we move away from using follow_page() --- that we can hopefully remove
completely at one point --- and use new walk_page_range_vma() instead.
Fortunately, we can get rid of VM_FAULT_WRITE and FOLL_MIGRATION in common
code now.
Extend the existing ksm tests by an unmerge benchmark, and a some new
unmerge tests.
Also, add a selftest to measure MADV_UNMERGEABLE performance. In my setup
(AMD Ryzen 9 3900X), running the KSM selftest to test unmerge performance
on 2 GiB (taskset 0x8 ./ksm_tests -D -s 2048), this results in a
performance degradation of ~6% -- 7% (old: ~5250 MiB/s, new: ~4900 MiB/s).
I don't think we particularly care for now, but it's good to be aware of
the implication.
This patch (of 9):
Let's add three unmerge tests (MADV_UNMERGEABLE unmerging all pages in the
range).
test_unmerge(): basic unmerge tests
test_unmerge_discarded(): have some pte_none() entries in the range
test_unmerge_uffd_wp(): protect the merged pages using uffd-wp
ksm_tests.c currently contains a mixture of benchmarks and tests, whereby
each test is carried out by executing the ksm_tests binary with specific
parameters. Let's add new ksm_functional_tests.c that performs multiple,
smaller functional tests all at once.
Link: https://lkml.kernel.org/r/20221021101141.84170-1-david@redhat.com
Link: https://lkml.kernel.org/r/20221021101141.84170-5-david@redhat.com
Signed-off-by: David Hildenbrand <david@redhat.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Jason Gunthorpe <jgg@nvidia.com>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Peter Xu <peterx@redhat.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Our memory management kernel CI testing at Red Hat uses the VM
selftests and we have run into two problems:
First, our LTP tests overlap with the VM selftests.
We want to avoid unhelpful redundancy in our testing practices.
Second, we have observed the current run_vmtests.sh to report overall
failure/ambiguous results in the case that a machine lacks the necessary
hardware to perform one or more of the tests. E.g. ksm tests that
require more than one numa node.
We want to be able to run the vm selftests suitable to particular hardware.
Add the ability to run one or more groups of vm tests via run_vmtests.sh
instead of simply all-or-none in order to solve these problems.
Preserve existing default behavior of running all tests when the script
is invoked with no arguments.
Documentation of test groups is included in the patch as follows:
# ./run_vmtests.sh [ -h || --help ]
usage: ./tools/testing/selftests/vm/run_vmtests.sh [ -h | -t "<categories>"]
-t: specify specific categories to tests to run
-h: display this message
The default behavior is to run all tests.
Alternatively, specific groups tests can be run by passing a string
to the -t argument containing one or more of the following categories
separated by spaces:
- mmap
tests for mmap(2)
- gup_test
tests for gup using gup_test interface
- userfaultfd
tests for userfaultfd(2)
- compaction
a test for the patch "Allow compaction of unevictable pages"
- mlock
tests for mlock(2)
- mremap
tests for mremap(2)
- hugevm
tests for very large virtual address space
- vmalloc
vmalloc smoke tests
- hmm
hmm smoke tests
- madv_populate
test memadvise(2) MADV_POPULATE_{READ,WRITE} options
- memfd_secret
test memfd_secret(2)
- process_mrelease
test process_mrelease(2)
- ksm
ksm tests that do not require >=2 NUMA nodes
- ksm_numa
ksm tests that require >=2 NUMA nodes
- pkey
memory protection key tests
- soft_dirty
test soft dirty page bit semantics
- anon_cow
test anonymous copy-on-write semantics
example: ./run_vmtests.sh -t "hmm mmap ksm"
Link: https://lkml.kernel.org/r/20221018231222.1884715-1-jsavitz@redhat.com
Signed-off-by: Joel Savitz <jsavitz@redhat.com>
Cc: Joel Savitz <jsavitz@redhat.com>
Cc: Nico Pache <npache@redhat.com>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
|
|
memcg_write_event_control() accesses the dentry->d_name of the specified
control fd to route the write call. As a cgroup interface file can't be
renamed, it's safe to access d_name as long as the specified file is a
regular cgroup file. Also, as these cgroup interface files can't be
removed before the directory, it's safe to access the parent too.
Prior to 347c4a874710 ("memcg: remove cgroup_event->cft"), there was a
call to __file_cft() which verified that the specified file is a regular
cgroupfs file before further accesses. The cftype pointer returned from
__file_cft() was no longer necessary and the commit inadvertently dropped
the file type check with it allowing any file to slip through. With the
invarients broken, the d_name and parent accesses can now race against
renames and removals of arbitrary files and cause use-after-free's.
Fix the bug by resurrecting the file type check in __file_cft(). Now that
cgroupfs is implemented through kernfs, checking the file operations needs
to go through a layer of indirection. Instead, let's check the superblock
and dentry type.
Link: https://lkml.kernel.org/r/Y5FRm/cfcKPGzWwl@slm.duckdns.org
Fixes: 347c4a874710 ("memcg: remove cgroup_event->cft")
Signed-off-by: Tejun Heo <tj@kernel.org>
Reported-by: Jann Horn <jannh@google.com>
Acked-by: Roman Gushchin <roman.gushchin@linux.dev>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Muchun Song <songmuchun@bytedance.com>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: <stable@vger.kernel.org> [3.14+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
I'm moving to the @linux.dev account. Map my old addresses and update it
to my new address.
Link: https://lkml.kernel.org/r/20221208115548.85244-1-songmuchun@bytedance.com
Signed-off-by: Muchun Song <songmuchun@bytedance.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
For dax pud, pud_huge() returns true on x86. So the function works as long
as hugetlb is configured. However, dax doesn't depend on hugetlb.
Commit 414fd080d125 ("mm/gup: fix gup_pmd_range() for dax") fixed
devmap-backed huge PMDs, but missed devmap-backed huge PUDs. Fix this as
well.
This fixes the below kernel panic:
general protection fault, probably for non-canonical address 0x69e7c000cc478: 0000 [#1] SMP
< snip >
Call Trace:
<TASK>
get_user_pages_fast+0x1f/0x40
iov_iter_get_pages+0xc6/0x3b0
? mempool_alloc+0x5d/0x170
bio_iov_iter_get_pages+0x82/0x4e0
? bvec_alloc+0x91/0xc0
? bio_alloc_bioset+0x19a/0x2a0
blkdev_direct_IO+0x282/0x480
? __io_complete_rw_common+0xc0/0xc0
? filemap_range_has_page+0x82/0xc0
generic_file_direct_write+0x9d/0x1a0
? inode_update_time+0x24/0x30
__generic_file_write_iter+0xbd/0x1e0
blkdev_write_iter+0xb4/0x150
? io_import_iovec+0x8d/0x340
io_write+0xf9/0x300
io_issue_sqe+0x3c3/0x1d30
? sysvec_reschedule_ipi+0x6c/0x80
__io_queue_sqe+0x33/0x240
? fget+0x76/0xa0
io_submit_sqes+0xe6a/0x18d0
? __fget_light+0xd1/0x100
__x64_sys_io_uring_enter+0x199/0x880
? __context_tracking_enter+0x1f/0x70
? irqentry_exit_to_user_mode+0x24/0x30
? irqentry_exit+0x1d/0x30
? __context_tracking_exit+0xe/0x70
do_syscall_64+0x3b/0x90
entry_SYSCALL_64_after_hwframe+0x61/0xcb
RIP: 0033:0x7fc97c11a7be
< snip >
</TASK>
---[ end trace 48b2e0e67debcaeb ]---
RIP: 0010:internal_get_user_pages_fast+0x340/0x990
< snip >
Kernel panic - not syncing: Fatal exception
Kernel Offset: disabled
Link: https://lkml.kernel.org/r/1670392853-28252-1-git-send-email-ssengar@linux.microsoft.com
Fixes: 414fd080d125 ("mm/gup: fix gup_pmd_range() for dax")
Signed-off-by: John Starks <jostarks@microsoft.com>
Signed-off-by: Saurabh Sengar <ssengar@linux.microsoft.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Yu Zhao <yuzhao@google.com>
Cc: Jason Gunthorpe <jgg@nvidia.com>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Alistair Popple <apopple@nvidia.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Add more sanity checks to the VMA that do_brk_flags() will expand. Ensure
the VMA matches basic merge requirements within the function before
calling can_vma_merge_after().
Drop the duplicate checks from vm_brk_flags() since they will be enforced
later.
The old code would expand file VMAs on brk(), which is functionally
wrong and also dangerous in terms of locking because the brk() path
isn't designed for file VMAs and therefore doesn't lock the file
mapping. Checking can_vma_merge_after() ensures that new anonymous
VMAs can't be merged into file VMAs.
See https://lore.kernel.org/linux-mm/CAG48ez1tJZTOjS_FjRZhvtDA-STFmdw8PEizPDwMGFd_ui0Nrw@mail.gmail.com/
Link: https://lkml.kernel.org/r/20221205192304.1957418-1-Liam.Howlett@oracle.com
Fixes: 2e7ce7d354f2 ("mm/mmap: change do_brk_flags() to expand existing VMA and add do_brk_munmap()")
Signed-off-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Suggested-by: Jann Horn <jannh@google.com>
Cc: Jason A. Donenfeld <Jason@zx2c4.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: SeongJae Park <sj@kernel.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Yu Zhao <yuzhao@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
We use "unsigned long" to store a PFN in the kernel and phys_addr_t to
store a physical address.
On a 64bit system, both are 64bit wide. However, on a 32bit system, the
latter might be 64bit wide. This is, for example, the case on x86 with
PAE: phys_addr_t and PTEs are 64bit wide, while "unsigned long" only spans
32bit.
The current definition of SWP_PFN_BITS without MAX_PHYSMEM_BITS misses
that case, and assumes that the maximum PFN is limited by an 32bit
phys_addr_t. This implies, that SWP_PFN_BITS will currently only be able
to cover 4 GiB - 1 on any 32bit system with 4k page size, which is wrong.
Let's rely on the number of bits in phys_addr_t instead, but make sure to
not exceed the maximum swap offset, to not make the BUILD_BUG_ON() in
is_pfn_swap_entry() unhappy. Note that swp_entry_t is effectively an
unsigned long and the maximum swap offset shares that value with the swap
type.
For example, on an 8 GiB x86 PAE system with a kernel config based on
Debian 11.5 (-> CONFIG_FLATMEM=y, CONFIG_X86_PAE=y), we will currently
fail removing migration entries (remove_migration_ptes()), because
mm/page_vma_mapped.c:check_pte() will fail to identify a PFN match as
swp_offset_pfn() wrongly masks off PFN bits. For example,
split_huge_page_to_list()->...->remap_page() will leave migration entries
in place and continue to unlock the page.
Later, when we stumble over these migration entries (e.g., via
/proc/self/pagemap), pfn_swap_entry_to_page() will BUG_ON() because these
migration entries shouldn't exist anymore and the page was unlocked.
[ 33.067591] kernel BUG at include/linux/swapops.h:497!
[ 33.067597] invalid opcode: 0000 [#1] PREEMPT SMP NOPTI
[ 33.067602] CPU: 3 PID: 742 Comm: cow Tainted: G E 6.1.0-rc8+ #16
[ 33.067605] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.0-1.fc36 04/01/2014
[ 33.067606] EIP: pagemap_pmd_range+0x644/0x650
[ 33.067612] Code: 00 00 00 00 66 90 89 ce b9 00 f0 ff ff e9 ff fb ff ff 89 d8 31 db e8 48 c6 52 00 e9 23 fb ff ff e8 61 83 56 00 e9 b6 fe ff ff <0f> 0b bf 00 f0 ff ff e9 38 fa ff ff 3e 8d 74 26 00 55 89 e5 57 31
[ 33.067615] EAX: ee394000 EBX: 00000002 ECX: ee394000 EDX: 00000000
[ 33.067617] ESI: c1b0ded4 EDI: 00024a00 EBP: c1b0ddb4 ESP: c1b0dd68
[ 33.067619] DS: 007b ES: 007b FS: 00d8 GS: 0033 SS: 0068 EFLAGS: 00010246
[ 33.067624] CR0: 80050033 CR2: b7a00000 CR3: 01bbbd20 CR4: 00350ef0
[ 33.067625] Call Trace:
[ 33.067628] ? madvise_free_pte_range+0x720/0x720
[ 33.067632] ? smaps_pte_range+0x4b0/0x4b0
[ 33.067634] walk_pgd_range+0x325/0x720
[ 33.067637] ? mt_find+0x1d6/0x3a0
[ 33.067641] ? mt_find+0x1d6/0x3a0
[ 33.067643] __walk_page_range+0x164/0x170
[ 33.067646] walk_page_range+0xf9/0x170
[ 33.067648] ? __kmem_cache_alloc_node+0x2a8/0x340
[ 33.067653] pagemap_read+0x124/0x280
[ 33.067658] ? default_llseek+0x101/0x160
[ 33.067662] ? smaps_account+0x1d0/0x1d0
[ 33.067664] vfs_read+0x90/0x290
[ 33.067667] ? do_madvise.part.0+0x24b/0x390
[ 33.067669] ? debug_smp_processor_id+0x12/0x20
[ 33.067673] ksys_pread64+0x58/0x90
[ 33.067675] __ia32_sys_ia32_pread64+0x1b/0x20
[ 33.067680] __do_fast_syscall_32+0x4c/0xc0
[ 33.067683] do_fast_syscall_32+0x29/0x60
[ 33.067686] do_SYSENTER_32+0x15/0x20
[ 33.067689] entry_SYSENTER_32+0x98/0xf1
Decrease the indentation level of SWP_PFN_BITS and SWP_PFN_MASK to keep it
readable and consistent.
[david@redhat.com: rely on sizeof(phys_addr_t) and min_t() instead]
Link: https://lkml.kernel.org/r/20221206105737.69478-1-david@redhat.com
[david@redhat.com: use "int" for comparison, as we're only comparing numbers < 64]
Link: https://lkml.kernel.org/r/1f157500-2676-7cef-a84e-9224ed64e540@redhat.com
Link: https://lkml.kernel.org/r/20221205150857.167583-1-david@redhat.com
Fixes: 0d206b5d2e0d ("mm/swap: add swp_offset_pfn() to fetch PFN from swap entry")
Signed-off-by: David Hildenbrand <david@redhat.com>
Acked-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Yang Shi <shy828301@gmail.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Fix tmpfs data loss when the fallocate system call is interrupted by a
signal, or fails for some other reason. The partial folio handling in
shmem_undo_range() forgot to consider this unfalloc case, and was liable
to erase or truncate out data which had already been committed earlier.
It turns out that none of the partial folio handling there is appropriate
for the unfalloc case, which just wants to proceed to removal of whole
folios: which find_get_entries() provides, even when partially covered.
Original patch by Rui Wang.
Link: https://lore.kernel.org/linux-mm/33b85d82.7764.1842e9ab207.Coremail.chenguoqic@163.com/
Link: https://lkml.kernel.org/r/a5dac112-cf4b-7af-a33-f386e347fd38@google.com
Fixes: b9a8a4195c7d ("truncate,shmem: Handle truncates that split large folios")
Signed-off-by: Hugh Dickins <hughd@google.com>
Reported-by: Guoqi Chen <chenguoqic@163.com>
Link: https://lore.kernel.org/all/20221101032248.819360-1-kernel@hev.cc/
Cc: Rui Wang <kernel@hev.cc>
Cc: Huacai Chen <chenhuacai@loongson.cn>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Vishal Moola (Oracle) <vishal.moola@gmail.com>
Cc: <stable@vger.kernel.org> [5.17+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
1813e51eece0 ("memcg: increase MEMCG_CHARGE_BATCH to 64") has changed
the batch size while this test case has been left behind. This has led
to a test failure reported by test bot:
not ok 2 selftests: cgroup: test_kmem # exit=1
Update the tolerance for the pcp charges to reflect the
MEMCG_CHARGE_BATCH change to fix this.
[akpm@linux-foundation.org: update comments, per Roman]
Link: https://lkml.kernel.org/r/Y4m8Unt6FhWKC6IH@dhcp22.suse.cz
Fixes: 1813e51eece0a ("memcg: increase MEMCG_CHARGE_BATCH to 64")
Signed-off-by: Michal Hocko <mhocko@suse.com>
Reported-by: kernel test robot <yujie.liu@intel.com>
Link: https://lore.kernel.org/oe-lkp/202212010958.c1053bd3-yujie.liu@intel.com
Acked-by: Shakeel Butt <shakeelb@google.com>
Acked-by: Roman Gushchin <roman.gushchin@linux.dev>
Tested-by: Yujie Liu <yujie.liu@intel.com>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Feng Tang <feng.tang@intel.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: "Michal Koutný" <mkoutny@suse.com>
Cc: Muchun Song <songmuchun@bytedance.com>
Cc: Soheil Hassas Yeganeh <soheil@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
The following program will trigger the BUG_ON that this patch removes,
because the user can munmap() mm->brk:
#include <sys/syscall.h>
#include <sys/mman.h>
#include <assert.h>
#include <unistd.h>
static void *brk_now(void)
{
return (void *)syscall(SYS_brk, 0);
}
static void brk_set(void *b)
{
assert(syscall(SYS_brk, b) != -1);
}
int main(int argc, char *argv[])
{
void *b = brk_now();
brk_set(b + 4096);
assert(munmap(b - 4096, 4096 * 2) == 0);
brk_set(b);
return 0;
}
Compile that with musl, since glibc actually uses brk(), and then
execute it, and it'll hit this splat:
kernel BUG at mm/mmap.c:229!
invalid opcode: 0000 [#1] PREEMPT SMP
CPU: 12 PID: 1379 Comm: a.out Tainted: G S U 6.1.0-rc7+ #419
RIP: 0010:__do_sys_brk+0x2fc/0x340
Code: 00 00 4c 89 ef e8 04 d3 fe ff eb 9a be 01 00 00 00 4c 89 ff e8 35 e0 fe ff e9 6e ff ff ff 4d 89 a7 20>
RSP: 0018:ffff888140bc7eb0 EFLAGS: 00010246
RAX: 0000000000000000 RBX: 00000000007e7000 RCX: ffff8881020fe000
RDX: ffff8881020fe001 RSI: ffff8881955c9b00 RDI: ffff8881955c9b08
RBP: 0000000000000000 R08: ffff8881955c9b00 R09: 00007ffc77844000
R10: 0000000000000000 R11: 0000000000000001 R12: 00000000007e8000
R13: 00000000007e8000 R14: 00000000007e7000 R15: ffff8881020fe000
FS: 0000000000604298(0000) GS:ffff88901f700000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000000603fe0 CR3: 000000015ba9a005 CR4: 0000000000770ee0
PKRU: 55555554
Call Trace:
<TASK>
do_syscall_64+0x2b/0x50
entry_SYSCALL_64_after_hwframe+0x46/0xb0
RIP: 0033:0x400678
Code: 10 4c 8d 41 08 4c 89 44 24 10 4c 8b 01 8b 4c 24 08 83 f9 2f 77 0a 4c 8d 4c 24 20 4c 01 c9 eb 05 48 8b>
RSP: 002b:00007ffc77863890 EFLAGS: 00000212 ORIG_RAX: 000000000000000c
RAX: ffffffffffffffda RBX: 000000000040031b RCX: 0000000000400678
RDX: 00000000004006a1 RSI: 00000000007e6000 RDI: 00000000007e7000
RBP: 00007ffc77863900 R08: 0000000000000000 R09: 00000000007e6000
R10: 00007ffc77863930 R11: 0000000000000212 R12: 00007ffc77863978
R13: 00007ffc77863988 R14: 0000000000000000 R15: 0000000000000000
</TASK>
Instead, just return the old brk value if the original mapping has been
removed.
[akpm@linux-foundation.org: fix changelog, per Liam]
Link: https://lkml.kernel.org/r/20221202162724.2009-1-Jason@zx2c4.com
Fixes: 2e7ce7d354f2 ("mm/mmap: change do_brk_flags() to expand existing VMA and add do_brk_munmap()")
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Reviewed-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Reviewed-by: SeongJae Park <sj@kernel.org>
Cc: Yu Zhao <yuzhao@google.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: David Howells <dhowells@redhat.com>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Sven Schnelle <svens@linux.ibm.com>
Cc: Will Deacon <will@kernel.org>
Cc: Jann Horn <jannh@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
The email backend used by ROHM keeps labeling patches as spam. This can
result in missing the patches.
Switch my mail address from a company mail to a personal one.
Link: https://lkml.kernel.org/r/8f4498b66fedcbded37b3b87e0c516e659f8f583.1669912977.git.mazziesaccount@gmail.com
Signed-off-by: Matti Vaittinen <mazziesaccount@gmail.com>
Suggested-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Cc: Anup Patel <anup@brainfault.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Atish Patra <atishp@atishpatra.org>
Cc: Baolin Wang <baolin.wang@linux.alibaba.com>
Cc: Ben Widawsky <bwidawsk@kernel.org>
Cc: Bjorn Andersson <andersson@kernel.org>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Colin Ian King <colin.i.king@gmail.com>
Cc: Kirill Tkhai <tkhai@ya.ru>
Cc: Qais Yousef <qyousef@layalina.io>
Cc: Vasily Averin <vasily.averin@linux.dev>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
If freeit is true, the value of ret must be zero, there is no need to
check the value of freeit after label unlock_mutex.
We can drop variable freeit to do this cleanup.
Link: https://lkml.kernel.org/r/20221125065444.3462681-1-mawupeng1@huawei.com
Signed-off-by: Ma Wupeng <mawupeng1@huawei.com>
Acked-by: Naoya Horiguchi <naoya.horiguchi@nec.com>
Reviewed-by: Miaohe Lin <linmiaohe@huawei.com>
Cc: zhenwei pi <pizhenwei@bytedance.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
We used to have 624a2c94f5b7 (Partly revert "mm/thp: carry over dirty bit
when thp splits on pmd") fixing the regression reported here by Anatoly
Pugachev on sparc64:
https://lore.kernel.org/r/20221021160603.GA23307@u164.east.ru
Where we temporarily ignored the dirty bit for small pages.
Then, Hev also reported similar issue on loongarch:
(the original mail was private, but Anatoly copied the list here)
https://lore.kernel.org/r/CADxRZqxqb7f_WhMh=jweZP+ynf_JwGd-0VwbYgp4P+T0-AXosw@mail.gmail.com
Hev pointed out that the issue is having HW write bit set within the
pte_mkdirty() so the split pte can be written after split even if e.g.
they were shared by more than one processes, causing data corrupt.
Hev also tried to explain why loongarch set HW write bit in mkdirty:
https://lore.kernel.org/r/CAHirt9itKO_K_HPboXh5AyJtt16Zf0cD73PtHvM=na39u_ztxA@mail.gmail.com
One way to fix it is as what Huacai proposed here for loongarch (then we
can re-apply the dirty bit in thp split):
https://lore.kernel.org/r/20221117042532.4064448-1-chenhuacai@loongson.cnn
We may need similar thing for sparc64, though.
For now since we've found the root cause of the dirty bit issue the
simpler solution (which won't lose the dirty bit for small) that will work
for both is we wr-protect after pte_mkdirty(), so the HW write bit can be
persistent after thp split.
Add a comment for wrprotect, so we will not mess up the ordering later.
With 624a2c94f5b7 (Partly revert "mm/thp: carry over dirty bit when thp
splits on pmd") this is not a fix anymore, but just brings back the dirty
bit for thp split safely, so we re-apply the optimization but in safe way.
Provide a Tested-by credit to Hev too (not the exact same patch but the
same outcome) for loongarch.
Link: https://lkml.kernel.org/r/20221125185857.3110155-1-peterx@redhat.com
Signed-off-by: Peter Xu <peterx@redhat.com>
Tested-by: Hev <r@hev.cc> # loongarch
Cc: Anatoly Pugachev <matorola@gmail.com>
Cc: Raghavendra K T <raghavendra.kt@amd.com>
Cc: Thorsten Leemhuis <regressions@leemhuis.info>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Replace open-coded snprintf() with sysfs_emit() to simplify the code.
Link: https://lkml.kernel.org/r/202211241929015476424@zte.com.cn
Signed-off-by: Xu Panda <xu.panda@zte.com.cn>
Signed-off-by: Yang Yang <yang.yang29@zte.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
In __gmap_segment_gaddr() pmd level page table page is being extracted
from the pmd pointer, similar to pmd_pgtable_page() implementation. This
reduces some redundancy by directly using pmd_pgtable_page() instead,
though first making it available.
Link: https://lkml.kernel.org/r/20221125034502.1559986-1-anshuman.khandual@arm.com
Signed-off-by: Anshuman Khandual <anshuman.khandual@arm.com>
Acked-by: Alexander Gordeev <agordeev@linux.ibm.com>
Cc: Christian Borntraeger <borntraeger@linux.ibm.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Current pmd_to_page(), which derives the page table page containing the
pmd address has a very misleading name. The problem being, it sounds
similar to pmd_page() which derives page embedded in a given pmd entry
either for next level page or a mapped huge page. Rename it as
pmd_pgtable_page() instead.
Link: https://lkml.kernel.org/r/20221124131641.1523772-1-anshuman.khandual@arm.com
Signed-off-by: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
zswap_frontswap_load() should be called from preemptible context (we even
call mutex_lock() there) and it does not look like we need to do
GFP_ATOMIC allocaion for temp buffer. The same applies to
zswap_writeback_entry().
Use GFP_KERNEL for temporary buffer allocation in both cases.
Link: https://lkml.kernel.org/r/Y3xCTr6ikbtcUr/y@google.com
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Signed-off-by: Nhat Pham <nphamcs@gmail.com>
Signed-off-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Cc: Dan Streetman <ddstreet@ieee.org>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Sergey Senozhatsky <senozhatsky@chromium.org>
Cc: Vitaly Wool <vitaly.wool@konsulko.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Although pmd_present() might seem to indicate a valid and mapped pmd
entry, in reality it returns true when pmd_page() points to a valid page
in memory , regardless whether the pmd entry is mapped or not. Andrea
Arcangeli had earlier explained [1] the required semantics for
pmd_present(). This just updates the documentation for pmd_present() as
required.
[1] https://lore.kernel.org/lkml/20181017020930.GN30832@redhat.com/
Link: https://lkml.kernel.org/r/20221123051319.1312582-1-anshuman.khandual@arm.com
Signed-off-by: Anshuman Khandual <anshuman.khandual@arm.com>
Acked-by: David Hildenbrand <david@redhat.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Mike Rapoport <rppt@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Depending on the memory configuration, isolate_freepages_block() may scan
pages out of the target range and causes panic.
Panic can occur on systems with multiple zones in a single pageblock.
The reason it is rare is that it only happens in special
configurations. Depending on how many similar systems there are, it
may be a good idea to fix this problem for older kernels as well.
The problem is that pfn as argument of fast_isolate_around() could be out
of the target range. Therefore we should consider the case where pfn <
start_pfn, and also the case where end_pfn < pfn.
This problem should have been addressd by the commit 6e2b7044c199 ("mm,
compaction: make fast_isolate_freepages() stay within zone") but there was
an oversight.
Case1: pfn < start_pfn
<at memory compaction for node Y>
| node X's zone | node Y's zone
+-----------------+------------------------------...
pageblock ^ ^ ^
+-----------+-----------+-----------+-----------+...
^ ^ ^
^ ^ end_pfn
^ start_pfn = cc->zone->zone_start_pfn
pfn
<---------> scanned range by "Scan After"
Case2: end_pfn < pfn
<at memory compaction for node X>
| node X's zone | node Y's zone
+-----------------+------------------------------...
pageblock ^ ^ ^
+-----------+-----------+-----------+-----------+...
^ ^ ^
^ ^ pfn
^ end_pfn
start_pfn
<---------> scanned range by "Scan Before"
It seems that there is no good reason to skip nr_isolated pages just after
given pfn. So let perform simple scan from start to end instead of
dividing the scan into "Before" and "After".
Link: https://lkml.kernel.org/r/20221026112438.236336-1-a.naribayashi@fujitsu.com
Fixes: 6e2b7044c199 ("mm, compaction: make fast_isolate_freepages() stay within zone").
Signed-off-by: NARIBAYASHI Akira <a.naribayashi@fujitsu.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
This documents the new /sys/class/bdi/<bdi>/max_ratio_fine knob.
[akpm@linux-foundation.org: fix htmldocs warnings]
Link: https://lkml.kernel.org/r/20221119005215.3052436-21-shr@devkernel.io
Signed-off-by: Stefan Roesch <shr@devkernel.io>
Cc: Chris Mason <clm@meta.com>
Cc: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
This adds the min_ratio_fine knob. The knob specifies the values not
based on 1 of 100, but instead 1 per million.
Link: https://lkml.kernel.org/r/20221119005215.3052436-20-shr@devkernel.io
Signed-off-by: Stefan Roesch <shr@devkernel.io>
Cc: Chris Mason <clm@meta.com>
Cc: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
This introduces bdi_set_min_ratio_no_scale(). It uses the max
granularity for the ratio. This function by the new sysfs knob
min_ratio_fine.
Link: https://lkml.kernel.org/r/20221119005215.3052436-19-shr@devkernel.io
Signed-off-by: Stefan Roesch <shr@devkernel.io>
Cc: Chris Mason <clm@meta.com>
Cc: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
This documents the new /sys/class/bdi/<bdi>/max_ratio_fine knob.
[akpm@linux-foundation.org: fix htmldocs warnings]
Link: https://lkml.kernel.org/r/20221119005215.3052436-18-shr@devkernel.io
Signed-off-by: Stefan Roesch <shr@devkernel.io>
Cc: Chris Mason <clm@meta.com>
Cc: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
This adds the max_ratio_fine knob. The knob specifies the values not
based on 1 of 100, but instead 1 per million.
Link: https://lkml.kernel.org/r/20221119005215.3052436-17-shr@devkernel.io
Signed-off-by: Stefan Roesch <shr@devkernel.io>
Cc: Chris Mason <clm@meta.com>
Cc: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
This introduces bdi_set_max_ratio_no_scale(). It uses the max
granularity for the ratio. This function by the new sysfs knob
max_ratio_fine.
Link: https://lkml.kernel.org/r/20221119005215.3052436-16-shr@devkernel.io
Signed-off-by: Stefan Roesch <shr@devkernel.io>
Cc: Chris Mason <clm@meta.com>
Cc: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
This documents the new /sys/class/bdi/<bdi>/min_bytes knob.
[akpm@linux-foundation.org: fix htmldocs warnings]
Link: https://lkml.kernel.org/r/20221119005215.3052436-15-shr@devkernel.io
Signed-off-by: Stefan Roesch <shr@devkernel.io>
Cc: Chris Mason <clm@meta.com>
Cc: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
