Age | Commit message (Collapse) | Author | Files | Lines |
|
The CSI2RX subsystem uses PSI-L DMA to transfer frames to memory. It can
have up to 32 threads per instance. J721S2 has two instances of the
subsystem, so there are 64 threads total, Add them to the endpoint map.
Signed-off-by: Vaishnav Achath <vaishnav.a@ti.com>
Reviewed-by: Udit Kumar <u-kumar1@ti.com>
Link: https://lore.kernel.org/r/20240125111449.855876-1-vaishnav.a@ti.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
The existing function k3_udma_glue_request_remote_rx_chn() supports
requesting an RX DMA channel and flow by the name of the RX DMA channel.
Add support to request RX DMA channel for a given thread ID in the form of
a new function named k3_udma_glue_request_remote_rx_chn_for_thread_id().
Also, export it for use by drivers which are probed by alternate methods
(non device-tree) but still wish to make use of the existing DMA APIs. Such
drivers could be informed about the thread ID corresponding to the RX DMA
channel by RPMsg for example.
Since the new function k3_udma_glue_request_remote_rx_chn_for_thread_id()
reuses most of the code in k3_udma_glue_request_remote_rx_chn(), create a
new function named k3_udma_glue_request_remote_rx_chn_common() for the
common code.
Signed-off-by: Siddharth Vadapalli <s-vadapalli@ti.com>
Acked-by: Peter Ujfalusi <peter.ujfalusi@gmail.com>
Link: https://lore.kernel.org/r/20240124124319.820002-5-s-vadapalli@ti.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
The existing function k3_udma_glue_request_tx_chn() supports requesting
a TX DMA channel by its name. Add a new function to request TX DMA channel
for a given thread ID, named k3_udma_glue_request_tx_chn_for_thread_id().
Also, export it for use by drivers which are probed by alternate methods
(non device-tree) but still wish to make use of the existing DMA APIs. Such
drivers could be informed about the thread ID corresponding to the TX DMA
channel by RPMsg for example.
Since the new function k3_udma_glue_request_tx_chn_for_thread_id() reuses
most of the code in k3_udma_glue_request_tx_chn(), create a new function
for the common code, named k3_udma_glue_request_tx_chn_common().
Signed-off-by: Siddharth Vadapalli <s-vadapalli@ti.com>
Acked-by: Peter Ujfalusi <peter.ujfalusi@gmail.com>
Link: https://lore.kernel.org/r/20240124124319.820002-4-s-vadapalli@ti.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
A single RX Channel can have multiple flows. It is possible that a
single device requests multiple flows on the same RX Channel. In such
cases, the existing implementation of naming the device on the basis of
the RX Channel can result in duplicate names. The existing implementation
only uses the RX Channel source thread when naming, which implies duplicate
names when different flows are being requested on the same RX Channel.
In order to avoid duplicate names, include the RX flow as well in the name.
Signed-off-by: Siddharth Vadapalli <s-vadapalli@ti.com>
Acked-by: Peter Ujfalusi <peter.ujfalusi@gmail.com>
Link: https://lore.kernel.org/r/20240124124319.820002-3-s-vadapalli@ti.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
The existing helper function of_k3_udma_glue_parse() fetches the DMA
Channel thread ID from the device-tree node. This makes it necessary to
have a device-tree node with the Channel thread IDs populated. However,
in the case where the thread ID is known by alternate methods (an
example being that of Firmware running on remote core sharing details of
the thread IDs), there is no equivalent function to implement the
functionality of the existing of_k3_udma_glue_parse() function. In such
cases, the driver utilizing the DMA APIs might not even have a
device-tree node to begin with, since it could be probed with other
methods (RPMsg-Bus for example).
Add the of_k3_udma_glue_parse_chn_by_id() helper function which accepts
the thread ID as an argument, thereby making it unnecessary to have a
device-tree node for obtaining the thread ID.
Since of_k3_udma_glue_parse() and of_k3_udma_glue_parse_chn_by_id()
share a lot of code in common, create a new function to handle the
common code which is named as of_k3_udma_glue_parse_chn_common().
Signed-off-by: Siddharth Vadapalli <s-vadapalli@ti.com>
Acked-by: Peter Ujfalusi <peter.ujfalusi@gmail.com>
Link: https://lore.kernel.org/r/20240124124319.820002-2-s-vadapalli@ti.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
This part was commented from commit 2f9ea1bde0d1 ("[POWERPC]
bestcomm: core bestcomm support for Freescale MPC5200") in
about 16 years before.
If there are no plans to enable this part code in the future,
we can remove this dead code.
Signed-off-by: Kunwu Chan <chentao@kylinos.cn>
Link: https://lore.kernel.org/r/20240124095502.480506-1-chentao@kylinos.cn
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
The DMA controllers found on the H616 and H618 are the same as the one
found on the A100. The only difference is the DMA endpoint (DRQ) layout.
Since the number of channels and endpoints are described with additional
generic properties, just add a new H616-specific compatible string and
fallback to the A100 one.
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
Link: https://lore.kernel.org/r/20240127163247.384439-5-wens@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
The VDMA HSIZE register (corresponding to sgl[0].size) is only 16bit wide /
the VSIZE register (corresponding to numf) is only 13bit wide, so reject
requests not fitting within that rather than silently transferring too
little data.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Reviewed-by: Radhey Shyam Pandey <radhey.shyam.pandey@amd.com>
Link: https://lore.kernel.org/r/20240105105956.1370220-1-peter@korsgaard.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Update the architecture dependency to be the generic Tegra
because the driver works on the four latest Tegra generations
not just T210, if you build a kernel with a specific
ARCH_TEGRA_xxx_SOC option that excludes 210 you don't get
this driver.
Fixes: 433de642a76c9 ("dmaengine: tegra210-adma: add support for Tegra186/Tegra194")
Signed-off-by: Peter Robinson <pbrobinson@gmail.com>
Cc: Jon Hunter <jonathanh@nvidia.com>
Cc: Thierry Reding <treding@nvidia.com>
Cc: Sameer Pujar <spujar@nvidia.com>
Cc: Laxman Dewangan <ldewangan@nvidia.com>
Reviewed-by: Jon Hunter <jonathanh@nvidia.com>
Link: https://lore.kernel.org/r/20240112093310.329642-2-pbrobinson@gmail.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
The pl330 driver re-uses DMA descriptors rather than reallocating
them each time. At present, upon re-use the .callback member is
cleared, but .callback result is not. This causes problems where a
consuming driver sets the .callback_result for some submissions but
not for others, as eventually the function is invoked erronously.
Clear .callback_result along with .callback
Signed-off-by: Daniel Scally <dan.scally@ideasonboard.com>
Link: https://lore.kernel.org/r/20240118112959.1027471-1-dan.scally@ideasonboard.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
|
|
Pull more bcachefs updates from Kent Overstreet:
"Some fixes, Some refactoring, some minor features:
- Assorted prep work for disk space accounting rewrite
- BTREE_TRIGGER_ATOMIC: after combining our trigger callbacks, this
makes our trigger context more explicit
- A few fixes to avoid excessive transaction restarts on
multithreaded workloads: fstests (in addition to ktest tests) are
now checking slowpath counters, and that's shaking out a few bugs
- Assorted tracepoint improvements
- Starting to break up bcachefs_format.h and move on disk types so
they're with the code they belong to; this will make room to start
documenting the on disk format better.
- A few minor fixes"
* tag 'bcachefs-2024-01-21' of https://evilpiepirate.org/git/bcachefs: (46 commits)
bcachefs: Improve inode_to_text()
bcachefs: logged_ops_format.h
bcachefs: reflink_format.h
bcachefs; extents_format.h
bcachefs: ec_format.h
bcachefs: subvolume_format.h
bcachefs: snapshot_format.h
bcachefs: alloc_background_format.h
bcachefs: xattr_format.h
bcachefs: dirent_format.h
bcachefs: inode_format.h
bcachefs; quota_format.h
bcachefs: sb-counters_format.h
bcachefs: counters.c -> sb-counters.c
bcachefs: comment bch_subvolume
bcachefs: bch_snapshot::btime
bcachefs: add missing __GFP_NOWARN
bcachefs: opts->compression can now also be applied in the background
bcachefs: Prep work for variable size btree node buffers
bcachefs: grab s_umount only if snapshotting
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timer updates from Thomas Gleixner:
"Updates for time and clocksources:
- A fix for the idle and iowait time accounting vs CPU hotplug.
The time is reset on CPU hotplug which makes the accumulated
systemwide time jump backwards.
- Assorted fixes and improvements for clocksource/event drivers"
* tag 'timers-core-2024-01-21' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
tick-sched: Fix idle and iowait sleeptime accounting vs CPU hotplug
clocksource/drivers/ep93xx: Fix error handling during probe
clocksource/drivers/cadence-ttc: Fix some kernel-doc warnings
clocksource/drivers/timer-ti-dm: Fix make W=n kerneldoc warnings
clocksource/timer-riscv: Add riscv_clock_shutdown callback
dt-bindings: timer: Add StarFive JH8100 clint
dt-bindings: timer: thead,c900-aclint-mtimer: separate mtime and mtimecmp regs
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc fixes from Aneesh Kumar:
- Increase default stack size to 32KB for Book3S
Thanks to Michael Ellerman.
* tag 'powerpc-6.8-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc/64s: Increase default stack size to 32KB
|
|
Add line breaks - inode_to_text() is now much easier to read.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
bcachefs_format.h has gotten too big; let's do some organizing.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Add a field to bch_snapshot for creation time; this will be important
when we start exposing the snapshot tree to userspace.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
The "apply this compression method in the background" paths now use the
compression option if background_compression is not set; this means that
setting or changing the compression option will cause existing data to
be compressed accordingly in the background.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
bcachefs btree nodes are big - typically 256k - and btree roots are
pinned in memory. As we're now up to 18 btrees, we now have significant
memory overhead in mostly empty btree roots.
And in the future we're going to start enforcing that certain btree node
boundaries exist, to solve lock contention issues - analagous to XFS's
AGIs.
Thus, we need to start allocating smaller btree node buffers when we
can. This patch changes code that refers to the filesystem constant
c->opts.btree_node_size to refer to the btree node buffer size -
btree_buf_bytes() - where appropriate.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
When I was testing mongodb over bcachefs with compression,
there is a lockdep warning when snapshotting mongodb data volume.
$ cat test.sh
prog=bcachefs
$prog subvolume create /mnt/data
$prog subvolume create /mnt/data/snapshots
while true;do
$prog subvolume snapshot /mnt/data /mnt/data/snapshots/$(date +%s)
sleep 1s
done
$ cat /etc/mongodb.conf
systemLog:
destination: file
logAppend: true
path: /mnt/data/mongod.log
storage:
dbPath: /mnt/data/
lockdep reports:
[ 3437.452330] ======================================================
[ 3437.452750] WARNING: possible circular locking dependency detected
[ 3437.453168] 6.7.0-rc7-custom+ #85 Tainted: G E
[ 3437.453562] ------------------------------------------------------
[ 3437.453981] bcachefs/35533 is trying to acquire lock:
[ 3437.454325] ffffa0a02b2b1418 (sb_writers#10){.+.+}-{0:0}, at: filename_create+0x62/0x190
[ 3437.454875]
but task is already holding lock:
[ 3437.455268] ffffa0a02b2b10e0 (&type->s_umount_key#48){.+.+}-{3:3}, at: bch2_fs_file_ioctl+0x232/0xc90 [bcachefs]
[ 3437.456009]
which lock already depends on the new lock.
[ 3437.456553]
the existing dependency chain (in reverse order) is:
[ 3437.457054]
-> #3 (&type->s_umount_key#48){.+.+}-{3:3}:
[ 3437.457507] down_read+0x3e/0x170
[ 3437.457772] bch2_fs_file_ioctl+0x232/0xc90 [bcachefs]
[ 3437.458206] __x64_sys_ioctl+0x93/0xd0
[ 3437.458498] do_syscall_64+0x42/0xf0
[ 3437.458779] entry_SYSCALL_64_after_hwframe+0x6e/0x76
[ 3437.459155]
-> #2 (&c->snapshot_create_lock){++++}-{3:3}:
[ 3437.459615] down_read+0x3e/0x170
[ 3437.459878] bch2_truncate+0x82/0x110 [bcachefs]
[ 3437.460276] bchfs_truncate+0x254/0x3c0 [bcachefs]
[ 3437.460686] notify_change+0x1f1/0x4a0
[ 3437.461283] do_truncate+0x7f/0xd0
[ 3437.461555] path_openat+0xa57/0xce0
[ 3437.461836] do_filp_open+0xb4/0x160
[ 3437.462116] do_sys_openat2+0x91/0xc0
[ 3437.462402] __x64_sys_openat+0x53/0xa0
[ 3437.462701] do_syscall_64+0x42/0xf0
[ 3437.462982] entry_SYSCALL_64_after_hwframe+0x6e/0x76
[ 3437.463359]
-> #1 (&sb->s_type->i_mutex_key#15){+.+.}-{3:3}:
[ 3437.463843] down_write+0x3b/0xc0
[ 3437.464223] bch2_write_iter+0x5b/0xcc0 [bcachefs]
[ 3437.464493] vfs_write+0x21b/0x4c0
[ 3437.464653] ksys_write+0x69/0xf0
[ 3437.464839] do_syscall_64+0x42/0xf0
[ 3437.465009] entry_SYSCALL_64_after_hwframe+0x6e/0x76
[ 3437.465231]
-> #0 (sb_writers#10){.+.+}-{0:0}:
[ 3437.465471] __lock_acquire+0x1455/0x21b0
[ 3437.465656] lock_acquire+0xc6/0x2b0
[ 3437.465822] mnt_want_write+0x46/0x1a0
[ 3437.465996] filename_create+0x62/0x190
[ 3437.466175] user_path_create+0x2d/0x50
[ 3437.466352] bch2_fs_file_ioctl+0x2ec/0xc90 [bcachefs]
[ 3437.466617] __x64_sys_ioctl+0x93/0xd0
[ 3437.466791] do_syscall_64+0x42/0xf0
[ 3437.466957] entry_SYSCALL_64_after_hwframe+0x6e/0x76
[ 3437.467180]
other info that might help us debug this:
[ 3437.469670] 2 locks held by bcachefs/35533:
other info that might help us debug this:
[ 3437.467507] Chain exists of:
sb_writers#10 --> &c->snapshot_create_lock --> &type->s_umount_key#48
[ 3437.467979] Possible unsafe locking scenario:
[ 3437.468223] CPU0 CPU1
[ 3437.468405] ---- ----
[ 3437.468585] rlock(&type->s_umount_key#48);
[ 3437.468758] lock(&c->snapshot_create_lock);
[ 3437.469030] lock(&type->s_umount_key#48);
[ 3437.469291] rlock(sb_writers#10);
[ 3437.469434]
*** DEADLOCK ***
[ 3437.469670] 2 locks held by bcachefs/35533:
[ 3437.469838] #0: ffffa0a02ce00a88 (&c->snapshot_create_lock){++++}-{3:3}, at: bch2_fs_file_ioctl+0x1e3/0xc90 [bcachefs]
[ 3437.470294] #1: ffffa0a02b2b10e0 (&type->s_umount_key#48){.+.+}-{3:3}, at: bch2_fs_file_ioctl+0x232/0xc90 [bcachefs]
[ 3437.470744]
stack backtrace:
[ 3437.470922] CPU: 7 PID: 35533 Comm: bcachefs Kdump: loaded Tainted: G E 6.7.0-rc7-custom+ #85
[ 3437.471313] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Arch Linux 1.16.3-1-1 04/01/2014
[ 3437.471694] Call Trace:
[ 3437.471795] <TASK>
[ 3437.471884] dump_stack_lvl+0x57/0x90
[ 3437.472035] check_noncircular+0x132/0x150
[ 3437.472202] __lock_acquire+0x1455/0x21b0
[ 3437.472369] lock_acquire+0xc6/0x2b0
[ 3437.472518] ? filename_create+0x62/0x190
[ 3437.472683] ? lock_is_held_type+0x97/0x110
[ 3437.472856] mnt_want_write+0x46/0x1a0
[ 3437.473025] ? filename_create+0x62/0x190
[ 3437.473204] filename_create+0x62/0x190
[ 3437.473380] user_path_create+0x2d/0x50
[ 3437.473555] bch2_fs_file_ioctl+0x2ec/0xc90 [bcachefs]
[ 3437.473819] ? lock_acquire+0xc6/0x2b0
[ 3437.474002] ? __fget_files+0x2a/0x190
[ 3437.474195] ? __fget_files+0xbc/0x190
[ 3437.474380] ? lock_release+0xc5/0x270
[ 3437.474567] ? __x64_sys_ioctl+0x93/0xd0
[ 3437.474764] ? __pfx_bch2_fs_file_ioctl+0x10/0x10 [bcachefs]
[ 3437.475090] __x64_sys_ioctl+0x93/0xd0
[ 3437.475277] do_syscall_64+0x42/0xf0
[ 3437.475454] entry_SYSCALL_64_after_hwframe+0x6e/0x76
[ 3437.475691] RIP: 0033:0x7f2743c313af
======================================================
In __bch2_ioctl_subvolume_create(), we grab s_umount unconditionally
and unlock it at the end of the function. There is a comment
"why do we need this lock?" about the lock coming from
commit 42d237320e98 ("bcachefs: Snapshot creation, deletion")
The reason is that __bch2_ioctl_subvolume_create() calls
sync_inodes_sb() which enforce locked s_umount to writeback all dirty
nodes before doing snapshot works.
Fix it by read locking s_umount for snapshotting only and unlocking
s_umount after sync_inodes_sb().
Signed-off-by: Su Yue <glass.su@suse.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
bch_fs::snapshots is allocated by kvzalloc in __snapshot_t_mut.
It should be freed by kvfree not kfree.
Or umount will triger:
[ 406.829178 ] BUG: unable to handle page fault for address: ffffe7b487148008
[ 406.830676 ] #PF: supervisor read access in kernel mode
[ 406.831643 ] #PF: error_code(0x0000) - not-present page
[ 406.832487 ] PGD 0 P4D 0
[ 406.832898 ] Oops: 0000 [#1] PREEMPT SMP PTI
[ 406.833512 ] CPU: 2 PID: 1754 Comm: umount Kdump: loaded Tainted: G OE 6.7.0-rc7-custom+ #90
[ 406.834746 ] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Arch Linux 1.16.3-1-1 04/01/2014
[ 406.835796 ] RIP: 0010:kfree+0x62/0x140
[ 406.836197 ] Code: 80 48 01 d8 0f 82 e9 00 00 00 48 c7 c2 00 00 00 80 48 2b 15 78 9f 1f 01 48 01 d0 48 c1 e8 0c 48 c1 e0 06 48 03 05 56 9f 1f 01 <48> 8b 50 08 48 89 c7 f6 c2 01 0f 85 b0 00 00 00 66 90 48 8b 07 f6
[ 406.837810 ] RSP: 0018:ffffb9d641607e48 EFLAGS: 00010286
[ 406.838213 ] RAX: ffffe7b487148000 RBX: ffffb9d645200000 RCX: ffffb9d641607dc4
[ 406.838738 ] RDX: 000065bb00000000 RSI: ffffffffc0d88b84 RDI: ffffb9d645200000
[ 406.839217 ] RBP: ffff9a4625d00068 R08: 0000000000000001 R09: 0000000000000001
[ 406.839650 ] R10: 0000000000000001 R11: 000000000000001f R12: ffff9a4625d4da80
[ 406.840055 ] R13: ffff9a4625d00000 R14: ffffffffc0e2eb20 R15: 0000000000000000
[ 406.840451 ] FS: 00007f0a264ffb80(0000) GS:ffff9a4e2d500000(0000) knlGS:0000000000000000
[ 406.840851 ] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 406.841125 ] CR2: ffffe7b487148008 CR3: 000000018c4d2000 CR4: 00000000000006f0
[ 406.841464 ] Call Trace:
[ 406.841583 ] <TASK>
[ 406.841682 ] ? __die+0x1f/0x70
[ 406.841828 ] ? page_fault_oops+0x159/0x470
[ 406.842014 ] ? fixup_exception+0x22/0x310
[ 406.842198 ] ? exc_page_fault+0x1ed/0x200
[ 406.842382 ] ? asm_exc_page_fault+0x22/0x30
[ 406.842574 ] ? bch2_fs_release+0x54/0x280 [bcachefs]
[ 406.842842 ] ? kfree+0x62/0x140
[ 406.842988 ] ? kfree+0x104/0x140
[ 406.843138 ] bch2_fs_release+0x54/0x280 [bcachefs]
[ 406.843390 ] kobject_put+0xb7/0x170
[ 406.843552 ] deactivate_locked_super+0x2f/0xa0
[ 406.843756 ] cleanup_mnt+0xba/0x150
[ 406.843917 ] task_work_run+0x59/0xa0
[ 406.844083 ] exit_to_user_mode_prepare+0x197/0x1a0
[ 406.844302 ] syscall_exit_to_user_mode+0x16/0x40
[ 406.844510 ] do_syscall_64+0x4e/0xf0
[ 406.844675 ] entry_SYSCALL_64_after_hwframe+0x6e/0x76
[ 406.844907 ] RIP: 0033:0x7f0a2664e4fb
Signed-off-by: Su Yue <glass.su@suse.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Fixes: 023f9ac9f70f bcachefs: Delete dio read alignment check
Reported-by: Brian Foster <bfoster@redhat.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
The variable tmp is being assigned a value but it isn't being
read afterwards. The assignment is redundant and so tmp can be
removed.
Cleans up clang scan build warning:
warning: Although the value stored to 'ret' is used in the enclosing
expression, the value is never actually read from 'ret'
[deadcode.DeadStores]
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
drop_locks_do() should not be used in a fastpath without first trying
the do in nonblocking mode - the unlock and relock will cause excessive
transaction restarts and potentially livelocking with other threads that
are contending for the same locks.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Factor out bch2_journal_bufs_to_text(), and use it in the
journal_entry_full() tracepoint; when we can't get a journal reservation
we need to know the outstanding journal entry sizes to know if the
problem is due to excessive flushing.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
When issuing discards, we may need to flush the journal if there's too
many buckets that can't be discarded until a journal flush.
But the heuristic was bad; we should be comparing the number of buckets
that need to flushes against the number of free buckets, not the number
of buckets we saw.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Also print out the data_opts, so that we can see what specifically is
being done to an extent.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
This fixes a bug with rebalance IOs getting stuck with reads completed,
but writes never being issued.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
It appears this was accidentally deleted at some point - also, do a bit
of cleanup.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Drop t he loop in bch2_kthread_io_clock_wait(): this allows the code
that uses it to be woken up for other reasons, and fixes a bug where
rebalance wouldn't wake up when a scan was requested.
This raises the possibility of spurious wakeups, but callers should
always be able to handle that reasonably well.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Some (buggy!) compilers have issues with this.
Fixes: https://github.com/koverstreet/bcachefs/issues/625
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|