| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Add support for LDO5 regulator. This is used by IPQ9574 USB.
Signed-off-by: Varadarajan Narayanan <quic_varada@quicinc.com>
Rule: <add>
Link: https://lore.kernel.org/stable/20231214104052.3267039-1-quic_varada%40quicinc.com
Link: https://msgid.link/r/20231214104052.3267039-1-quic_varada@quicinc.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Merge series from Fenglin Wu <quic_fenglinw@quicinc.com>:
There are 2 PM8010 PMICs present in sm8550-mtp/sm8550-qrd boards and
each of them exposes 7 LDOs. Add RPMH regulator support for them.
Signed-off-by: Fenglin Wu <quic_fenglinw@quicinc.com>
---
Changes in v2:
- Updated subject prefix in the dt-binding commit and fixed the typo.
- Separate the DTS commit with board name prefixes.
- Link to v1: https://lore.kernel.org/r/20231211-pm8010-regulator-v1-0-571e05fb4ecc@quicinc.com
---
Fenglin Wu (5):
regulator: qcom-rpmh: extend to support multiple linear voltage ranges
regulator: dt-bindings: qcom,rpmh: add compatible for pm8010
regulator: qcom-rpmh: add support for pm8010 regulators
arm64: dts: qcom: sm8550-mtp: Add pm8010 regulators
arm64: dts: qcom: sm8550-qrd: add PM8010 regulators
.../bindings/regulator/qcom,rpmh-regulator.yaml | 14 ++
arch/arm64/boot/dts/qcom/sm8550-mtp.dts | 120 ++++++++++++++
arch/arm64/boot/dts/qcom/sm8550-qrd.dts | 120 ++++++++++++++
drivers/regulator/qcom-rpmh-regulator.c | 177 ++++++++++++++++++---
4 files changed, 405 insertions(+), 26 deletions(-)
---
base-commit: 753e4d5c433da57da75dd4c3e1aececc8e874a62
change-id: 20231205-pm8010-regulator-0348cb19087a
Best regards,
--
Fenglin Wu <quic_fenglinw@quicinc.com>
|
|
Add RPMH regulators exposed by Qualcomm Technologies, Inc. PM8010
PMIC. It has 7 LDOs with 3 different types, LDO1 - LDO2 are L502
NMOS LDOs, LDO5 and LDO7 are L502 PMOS LDOs, LDO3/LDO4/LDO6 are
L502 PMOS LDO for low noise applications. Also, LDO3 - LDO7 don't
support LPM.
Suggested-by: David Collins <quic_collinsd@quicinc.com>
Reviewed-by: David Collins <quic_collinsd@quicinc.com>
Signed-off-by: Fenglin Wu <quic_fenglinw@quicinc.com>
Link: https://msgid.link/r/20231214-pm8010-regulator-v2-3-82131df6b97b@quicinc.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Add compatible for PM8010 RPMH regulators present on sm8550-qrd and
sm8550-mtp boards.
Suggested-by: David Collins <quic_collinsd@quicinc.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Fenglin Wu <quic_fenglinw@quicinc.com>
Link: https://msgid.link/r/20231214-pm8010-regulator-v2-2-82131df6b97b@quicinc.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Update rpmh_vreg_hw_data to support multiple linear voltage ranges for
potential regulators which have discrete voltage program ranges.
Suggested-by: David Collins <quic_collinsd@quicinc.com>
Reviewed-by: David Collins <quic_collinsd@quicinc.com>
Signed-off-by: Fenglin Wu <quic_fenglinw@quicinc.com>
Link: https://msgid.link/r/20231214-pm8010-regulator-v2-1-82131df6b97b@quicinc.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Merge series from Uwe Kleine-König <u.kleine-koenig@pengutronix.de>:
Hello,
this series converts all drivers below drivers/regulator to struct
platform_driver::remove_new(). See commit 5c5a7680e67b ("platform:
Provide a remove callback that returns no value") for an extended
explanation and the eventual goal.
All conversations are trivial, because all .remove() callbacks returned
zero unconditionally.
There are no interdependencies between these patches, so they could be
picked up individually. However I'd expect them to go in all together
via Mark's regulator tree.
Best regards
Uwe
Uwe Kleine-König (8):
regulator: arizona-ldo1: Convert to platform remove callback returning
void
regulator: bd9571mwv: Convert to platform remove callback returning
void
regulator: db8500-prcmu: Convert to platform remove callback returning
void
regulator: stm32-vrefbuf: Convert to platform remove callback
returning void
regulator: uniphier: Convert to platform remove callback returning
void
regulator: userspace-consumer: Convert to platform remove callback
returning void
regulator: virtual: Convert to platform remove callback returning void
regulator: wm8350: Convert to platform remove callback returning void
drivers/regulator/arizona-ldo1.c | 8 +++-----
drivers/regulator/bd9571mwv-regulator.c | 5 ++---
drivers/regulator/db8500-prcmu.c | 6 ++----
drivers/regulator/stm32-vrefbuf.c | 6 ++----
drivers/regulator/uniphier-regulator.c | 6 ++----
drivers/regulator/userspace-consumer.c | 6 ++----
drivers/regulator/virtual.c | 6 ++----
drivers/regulator/wm8350-regulator.c | 6 ++----
8 files changed, 17 insertions(+), 32 deletions(-)
base-commit: 0f5f12ac05f36f117e793656c3f560625e927f1b
--
2.42.0
|
|
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://msgid.link/r/1f7bbc545829a1cc3df40be0424fe46d7449fb72.1701778038.git.u.kleine-koenig@pengutronix.de
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://msgid.link/r/d9954f02ae51b1b0b0077c710d16bfaeafa216ec.1701778038.git.u.kleine-koenig@pengutronix.de
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
void
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://msgid.link/r/89c5f261707bf178e1508cf5dd55121f0da2dc3f.1701778038.git.u.kleine-koenig@pengutronix.de
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://msgid.link/r/ced2a73a1aeca3f33d4b194e4dbe2672ad84a50a.1701778038.git.u.kleine-koenig@pengutronix.de
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://msgid.link/r/2e96cf99c8d97b728d891a745e8f94ee39fbfee8.1701778038.git.u.kleine-koenig@pengutronix.de
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://msgid.link/r/fcaa42d7dd707031ed8dd9e8c28483891b879965.1701778038.git.u.kleine-koenig@pengutronix.de
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://msgid.link/r/639e796b36815a219ff1172cc758ba7378211d74.1701778038.git.u.kleine-koenig@pengutronix.de
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://msgid.link/r/76c7af01e2c8b3ab6585a04bc3f0d163fbb7fdf7.1701778038.git.u.kleine-koenig@pengutronix.de
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
This commit introduces netlink event support to the regulator subsystem.
Changes:
- Introduce event.c and regnl.h for netlink event handling.
- Implement reg_generate_netlink_event to broadcast regulator events.
- Update Makefile to include the new event.c file.
Signed-off-by: Naresh Solanki <naresh.solanki@9elements.com>
Link: https://lore.kernel.org/r/20231205105207.1262928-1-naresh.solanki@9elements.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
This commit introduces netlink event support to the regulator subsystem.
Changes:
- Introduce event.c and regnl.h for netlink event handling.
- Implement reg_generate_netlink_event to broadcast regulator events.
- Update Makefile to include the new event.c file.
Signed-off-by: Naresh Solanki <naresh.solanki@9elements.com>
Link: https://lore.kernel.org/r/20231205105207.1262928-1-naresh.solanki@9elements.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Merge series from Oleksij Rempel <o.rempel@pengutronix.de>:
This series add under-voltage and emergency shutdown for system critical
regulators
|
|
Merge series from Dang Huynh <danct12@riseup.net>:
PM8937 is a power management IC. It is used in various boards with
MSM8917, MSM8937, MSM8940 and APQ variants.
|
|
No functional modification involved.
drivers/regulator/stpmic1_regulator.c:31: warning: expecting prototype for struct stpmic1. Prototype was for struct stpmic1_regulator_cfg instead.
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Closes: https://bugzilla.openanolis.cn/show_bug.cgi?id=7206
Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Link: https://lore.kernel.org/r/20231109073925.98783-1-jiapeng.chong@linux.alibaba.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Pointer pdata is being initialized with a value that is never read. It is
being re-assigned later on with the return from a devm_kzalloc call.
Remove the redundant initialization, cleans up clang scan build warning:
drivers/regulator/palmas-regulator.c:1597:36: warning: Value stored
to 'pdata' during its initialization is never read [deadcode.DeadStores]
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Link: https://lore.kernel.org/r/20231111195330.338324-1-colin.i.king@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The use_count of a regulator should only be incremented when the
enable_count changes from 0 to 1. Similarly, the use_count should
only be decremented when the enable_count changes from 1 to 0.
In the previous implementation, use_count was sometimes decremented
to 0 when some consumer called unbalanced disable,
leading to unexpected disable even the regulator is enabled by
other consumers. With this change, the use_count accurately reflects
the number of users which the regulator is enabled.
This should make things more robust in the case where a consumer does
leak references.
Signed-off-by: Rui Zhang <zr.zhang@vivo.com>
Link: https://lore.kernel.org/r/20231103074231.8031-1-zr.zhang@vivo.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
This may be useful for debugging and develompent purposes, when there are
drivers that depend on regulators to be enabled but do not request them.
It is inspired from the clk_ignore_unused and pd_ignore_unused parameters,
that are used to keep firmware-enabled clocks and power domains on even if
these are not used by drivers.
The parameter is not expected to be used in normal cases and should not be
needed on a platform with proper driver support.
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Brian Masney <bmasney@redhat.com>
Acked-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20231107190926.1185326-1-javierm@redhat.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Add 'uv_survival_time' field to regulation_constraints for specifying
survival time post critical under-voltage event. Update the regulator
notifier call chain and Device Tree property parsing to use this new
field, allowing a configurable timeout before emergency shutdown.
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Link: https://lore.kernel.org/r/20231026144824.4065145-6-o.rempel@pengutronix.de
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Introduces a new devicetree property to specifies the time window (in
milliseconds) following a critical under-voltage (UV) event during which
less critical actions can be safely carried out by the system.
Less Critical Actions:
- Logging the under-voltage event for later analysis.
- Saving less critical data that may be useful for diagnosing issues or
for audit purposes.
More Critical Actions (post the less critical window):
- Initiating procedures to properly shutdown hardware to prevent damage.
The 'regulator-uv-less-critical-window-ms' property is crucial for
conveying board-specific hardware characteristics, not for enforcing a
certain policy. The time window represented by this property is derived
from the physical attributes of the hardware like the capacity of
on-board capacitors, the power consumption of the components, and the
time needed to safely shut down hardware to prevent damage. These
attributes can significantly vary between different boards, making it a
board-specific property rather than a policy directive.
By providing a precise representation of the time available for less
critical actions post an under-voltage event, this property enables the
kernel to make informed decisions on action prioritization, ensuring
that essential preventative measures are taken to avoid hardware damage
while also allowing for data capture and analysis.
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20231026144824.4065145-5-o.rempel@pengutronix.de
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
In certain projects, the main system regulator, composed of simple
components including an under-voltage detector and capacitors, can be
aptly described as a fixed regulator in the device tree. To cater to
such use cases, this patch extends the fixed regulator binding to
support the 'system-critical-regulator' property. This property
signifies that the fixed-regulator is vital for system stability.
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20231026144824.4065145-4-o.rempel@pengutronix.de
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Handle under-voltage events for crucial regulators to maintain system
stability and avoid issues during power drops.
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Link: https://lore.kernel.org/r/20231026144824.4065145-3-o.rempel@pengutronix.de
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Introduce a new Device Tree property 'system-critical-regulator' for
marking a regulator as crucial for system stability or functionality.
This helps in distinguishing regulators that are vital for system
operations and may require special handling in under-voltage scenarios.
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20231026144824.4065145-2-o.rempel@pengutronix.de
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Document the pm8937 compatible string and available regulators in
the QCOM SMD RPM regulator documentation.
Signed-off-by: Dang Huynh <danct12@riseup.net>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20231106-pm8937-v1-6-ec51d9eeec53@riseup.net
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The PM8937 is found on boards with MSM8917, MSM8937, MSM8940 SoCs and
APQ variants.
It provides 6 SMPS (two are controlled by SPMI) and 23 LDO regulators.
Signed-off-by: Dang Huynh <danct12@riseup.net>
Reviewed-by: Stephan Gerhold <stephan@gerhold.net>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20231106-pm8937-v1-5-ec51d9eeec53@riseup.net
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Add support for qcom,pm8937-regulators compatible string and add
relevant supplies in QCOM's SPMI regulator documentation.
Signed-off-by: Dang Huynh <danct12@riseup.net>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20231106-pm8937-v1-4-ec51d9eeec53@riseup.net
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The PM8937 has 4 HFSMPS, 2 FTSMPS2.5 (for controlling APC voltage)
and 23 LDO regulators.
Add the configuration for this chip.
Signed-off-by: Dang Huynh <danct12@riseup.net>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20231106-pm8937-v1-3-ec51d9eeec53@riseup.net
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
|
|
The commands should be sorted inside the group definition.
Fix the ordering so we won't get following warning:
WARN_ON(iwl_cmd_groups_verify_sorted(trans_cfg))
Link: https://lore.kernel.org/regressions/2fa930bb-54dd-4942-a88d-05a47c8e9731@gmail.com/
Link: https://lore.kernel.org/linux-wireless/CAHk-=wix6kqQ5vHZXjOPpZBfM7mMm9bBZxi2Jh7XnaKCqVf94w@mail.gmail.com/
Fixes: b6e3d1ba4fcf ("wifi: iwlwifi: mvm: implement new firmware API for statistics")
Tested-by: Niklāvs Koļesņikovs <pinkflames.linux@gmail.com>
Tested-by: Damian Tometzki <damian@riscv-rocks.de>
Acked-by: Kalle Valo <kvalo@kernel.org>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux
Pull parisc architecture fixes from Helge Deller:
- Include the upper 5 address bits when inserting TLB entries on a
64-bit kernel.
On physical machines those are ignored, but in qemu it's nice to have
them included and to be correct.
- Stop the 64-bit kernel and show a warning if someone tries to boot on
a machine with a 32-bit CPU
- Fix a "no previous prototype" warning in parport-gsc
* tag 'parisc-for-6.7-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux:
parisc: Prevent booting 64-bit kernels on PA1.x machines
parport: gsc: mark init function static
parisc/pgtable: Do not drop upper 5 address bits of physical address
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson
Pull LoongArch updates from Huacai Chen:
- support PREEMPT_DYNAMIC with static keys
- relax memory ordering for atomic operations
- support BPF CPU v4 instructions for LoongArch
- some build and runtime warning fixes
* tag 'loongarch-6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson:
selftests/bpf: Enable cpu v4 tests for LoongArch
LoongArch: BPF: Support signed mod instructions
LoongArch: BPF: Support signed div instructions
LoongArch: BPF: Support 32-bit offset jmp instructions
LoongArch: BPF: Support unconditional bswap instructions
LoongArch: BPF: Support sign-extension mov instructions
LoongArch: BPF: Support sign-extension load instructions
LoongArch: Add more instruction opcodes and emit_* helpers
LoongArch/smp: Call rcutree_report_cpu_starting() earlier
LoongArch: Relax memory ordering for atomic operations
LoongArch: Mark __percpu functions as always inline
LoongArch: Disable module from accessing external data directly
LoongArch: Support PREEMPT_DYNAMIC with static keys
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc fixes from Michael Ellerman:
- Finish a refactor of pgprot_framebuffer() which dependend
on some changes that were merged via the drm tree
- Fix some kernel-doc warnings to quieten the bots
Thanks to Nathan Lynch and Thomas Zimmermann.
* tag 'powerpc-6.7-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc/rtas: Fix ppc_rtas_rmo_buf_show() kernel-doc
powerpc/pseries/rtas-work-area: Fix rtas_work_area_reserve_arena() kernel-doc
powerpc/fb: Call internal __phys_mem_access_prot() in fbdev code
powerpc: Remove file parameter from phys_mem_access_prot()
powerpc/machdep: Remove trailing whitespaces
|
|
git://git.samba.org/sfrench/cifs-2.6
Pull smb client fixes from Steve French:
- ctime caching fix (for setxattr)
- encryption fix
- DNS resolver mount fix
- debugging improvements
- multichannel fixes including cases where server stops or starts
supporting multichannel after mount
- reconnect fix
- minor cleanups
* tag '6.7-rc-smb3-client-fixes-part2' of git://git.samba.org/sfrench/cifs-2.6:
cifs: update internal module version number for cifs.ko
cifs: handle when server stops supporting multichannel
cifs: handle when server starts supporting multichannel
Missing field not being returned in ioctl CIFS_IOC_GET_MNT_INFO
smb3: allow dumping session and tcon id to improve stats analysis and debugging
smb: client: fix mount when dns_resolver key is not available
smb3: fix caching of ctime on setxattr
smb3: minor cleanup of session handling code
cifs: reconnect work should have reference on server struct
cifs: do not pass cifs_sb when trying to add channels
cifs: account for primary channel in the interface list
cifs: distribute channels across interfaces based on speed
cifs: handle cases where a channel is closed
smb3: more minor cleanups for session handling routines
smb3: minor RDMA cleanup
cifs: Fix encryption of cleared, but unset rq_iter data buffers
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull probes fixes from Masami Hiramatsu:
- Documentation update: Add a note about argument and return value
fetching is the best effort because it depends on the type.
- objpool: Fix to make internal global variables static in
test_objpool.c.
- kprobes: Unify kprobes_exceptions_nofify() prototypes. There are the
same prototypes in asm/kprobes.h for some architectures, but some of
them are missing the prototype and it causes a warning. So move the
prototype into linux/kprobes.h.
- tracing: Fix to check the tracepoint event and return event at
parsing stage. The tracepoint event doesn't support %return but if
$retval exists, it will be converted to %return silently. This finds
that case and rejects it.
- tracing: Fix the order of the descriptions about the parameters of
__kprobe_event_gen_cmd_start() to be consistent with the argument
list of the function.
* tag 'probes-fixes-v6.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
tracing/kprobes: Fix the order of argument descriptions
tracing: fprobe-event: Fix to check tracepoint event and return
kprobes: unify kprobes_exceptions_nofify() prototypes
lib: test_objpool: make global variables static
Documentation: tracing: Add a note about argument and retval access
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/deller/linux-fbdev
Pull fbdev fixes and cleanups from Helge Deller:
- fix double free and resource leaks in imsttfb
- lots of remove callback cleanups and section mismatch fixes in
omapfb, amifb and atmel_lcdfb
- error code fix and memparse simplification in omapfb
* tag 'fbdev-for-6.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/linux-fbdev: (31 commits)
fbdev: fsl-diu-fb: mark wr_reg_wa() static
fbdev: amifb: Convert to platform remove callback returning void
fbdev: amifb: Mark driver struct with __refdata to prevent section mismatch warning
fbdev: hyperv_fb: fix uninitialized local variable use
fbdev: omapfb/tpd12s015: Convert to platform remove callback returning void
fbdev: omapfb/tfp410: Convert to platform remove callback returning void
fbdev: omapfb/sharp-ls037v7dw01: Convert to platform remove callback returning void
fbdev: omapfb/opa362: Convert to platform remove callback returning void
fbdev: omapfb/hdmi: Convert to platform remove callback returning void
fbdev: omapfb/dvi: Convert to platform remove callback returning void
fbdev: omapfb/dsi-cm: Convert to platform remove callback returning void
fbdev: omapfb/dpi: Convert to platform remove callback returning void
fbdev: omapfb/analog-tv: Convert to platform remove callback returning void
fbdev: atmel_lcdfb: Convert to platform remove callback returning void
fbdev: omapfb/tpd12s015: Don't put .remove() in .exit.text and drop suppress_bind_attrs
fbdev: omapfb/tfp410: Don't put .remove() in .exit.text and drop suppress_bind_attrs
fbdev: omapfb/sharp-ls037v7dw01: Don't put .remove() in .exit.text and drop suppress_bind_attrs
fbdev: omapfb/opa362: Don't put .remove() in .exit.text and drop suppress_bind_attrs
fbdev: omapfb/hdmi: Don't put .remove() in .exit.text and drop suppress_bind_attrs
fbdev: omapfb/dvi: Don't put .remove() in .exit.text and drop suppress_bind_attrs
...
|
|
The order of descriptions should be consistent with the argument list of
the function, so "kretprobe" should be the second one.
int __kprobe_event_gen_cmd_start(struct dynevent_cmd *cmd, bool kretprobe,
const char *name, const char *loc, ...)
Link: https://lore.kernel.org/all/20231031041305.3363712-1-yujie.liu@intel.com/
Fixes: 2a588dd1d5d6 ("tracing: Add kprobe event command generation functions")
Suggested-by: Mukesh Ojha <quic_mojha@quicinc.com>
Signed-off-by: Yujie Liu <yujie.liu@intel.com>
Reviewed-by: Mukesh Ojha <quic_mojha@quicinc.com>
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
|
|
Pull drm fixes from Daniel Vetter:
"Dave's VPN to the big machine died, so it's on me to do fixes pr this
and next week while everyone else is at plumbers.
- big pile of amd fixes, but mostly for hw support newly added in 6.7
- i915 fixes, mostly minor things
- qxl memory leak fix
- vc4 uaf fix in mock helpers
- syncobj fix for DRM_SYNCOBJ_WAIT_FLAGS_WAIT_AVAILABLE"
* tag 'drm-next-2023-11-10' of git://anongit.freedesktop.org/drm/drm: (78 commits)
drm/amdgpu: fix error handling in amdgpu_vm_init
drm/amdgpu: Fix possible null pointer dereference
drm/amdgpu: move UVD and VCE sched entity init after sched init
drm/amdgpu: move kfd_resume before the ip late init
drm/amd: Explicitly check for GFXOFF to be enabled for s0ix
drm/amdgpu: Change WREG32_RLC to WREG32_SOC15_RLC where inst != 0 (v2)
drm/amdgpu: Use correct KIQ MEC engine for gfx9.4.3 (v5)
drm/amdgpu: add smu v13.0.6 pcs xgmi ras error query support
drm/amdgpu: fix software pci_unplug on some chips
drm/amd/display: remove duplicated argument
drm/amdgpu: correct mca debugfs dump reg list
drm/amdgpu: correct acclerator check architecutre dump
drm/amdgpu: add pcs xgmi v6.4.0 ras support
drm/amdgpu: Change extended-scope MTYPE on GC 9.4.3
drm/amdgpu: disable smu v13.0.6 mca debug mode by default
drm/amdgpu: Support multiple error query modes
drm/amdgpu: refine smu v13.0.6 mca dump driver
drm/amdgpu: Do not program PF-only regs in hdp_v4_0.c under SRIOV (v2)
drm/amdgpu: Skip PCTL0_MMHUB_DEEPSLEEP_IB write in jpegv4.0.3 under SRIOV
drm: amd: Resolve Sphinx unexpected indentation warning
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 fixes from Catalin Marinas:
"Mostly PMU fixes and a reworking of the pseudo-NMI disabling on broken
MediaTek firmware:
- Move the MediaTek GIC quirk handling from irqchip to core. Before
the merging window commit 44bd78dd2b88 ("irqchip/gic-v3: Disable
pseudo NMIs on MediaTek devices w/ firmware issues") temporarily
addressed this issue. Fixed now at a deeper level in the arch code
- Reject events meant for other PMUs in the CoreSight PMU driver,
otherwise some of the core PMU events would disappear
- Fix the Armv8 PMUv3 driver driver to not truncate 64-bit registers,
causing some events to be invisible
- Remove duplicate declaration of __arm64_sys##name following the
patch to avoid prototype warning for syscalls
- Typos in the elf_hwcap documentation"
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
arm64/syscall: Remove duplicate declaration
Revert "arm64: smp: avoid NMI IPIs with broken MediaTek FW"
arm64: Move MediaTek GIC quirk handling from irqchip to core
arm64/arm: arm_pmuv3: perf: Don't truncate 64-bit registers
perf: arm_cspmu: Reject events meant for other PMUs
Documentation/arm64: Fix typos in elf_hwcaps
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"A collection of fixes for rc1.
The majority of changes are various ASoC driver-specific small fixes
and usual HD-audio quirks, while there are a couple of core changes: a
fix in ALSA core procfs code to avoid deadlocks at disconnection and
an ASoC core fix for DAPM clock widgets"
* tag 'sound-fix-6.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
OSS: dmasound/paula: Convert to platform remove callback returning void
ALSA: hda: ASUS UM5302LA: Added quirks for cs35L41/10431A83 on i2c bus
ALSA: info: Fix potential deadlock at disconnection
ASoC: nau8540: Add self recovery to improve capture quility
ALSA: hda/realtek: Add support dual speaker for Dell
ALSA: hda: Add ASRock X670E Taichi to denylist
ALSA: hda/realtek: Add quirk for ASUS UX7602ZM
ASoC: SOF: sof-client: trivial: fix comment typo
ASoC: dapm: fix clock get name
ASoC: hdmi-codec: register hpd callback on component probe
ASoC: mediatek: mt8186_mt6366_rt1019_rt5682s: trivial: fix error messages
ASoC: da7219: Improve system suspend and resume handling
ASoC: codecs: Modify macro value error
ASoC: codecs: Modify the wrong judgment of re value
ASoC: codecs: Modify the maximum value of calib
ASoC: amd: acp: fix for i2s mode register field update
ASoC: codecs: aw88399: Fix -Wuninitialized in aw_dev_set_vcalb()
ASoC: rt712-sdca: fix speaker route missing issue
ASoC: rockchip: Fix unused rockchip_i2s_tdm_match warning for !CONFIG_OF
ASoC: ti: omap-mcbsp: Fix runtime PM underflow warnings
|
|
https://gitlab.freedesktop.org/agd5f/linux into drm-next
amd-drm-next-6.7-2023-11-10:
amdgpu:
- SR-IOV fixes
- DMCUB fixes
- DCN3.5 fixes
- DP2 fixes
- SubVP fixes
- SMU14 fixes
- SDMA4.x fixes
- Suspend/resume fixes
- AGP regression fix
- UAF fixes for some error cases
- SMU 13.0.6 fixes
- Documentation fixes
- RAS fixes
- Hotplug fixes
- Scheduling entity ordering fix
- GPUVM fixes
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
From: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231110190703.4741-1-alexander.deucher@amd.com
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi
Pull spi fixes from Mark Brown:
"A couple of fixes that came in during the merge window: one Kconfig
dependency fix and another fix for a long standing issue where a sync
transfer races with system suspend"
* tag 'spi-fix-v6.7-merge-window' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
spi: Fix null dereference on suspend
spi: spi-zynq-qspi: add spi-mem to driver kconfig dependencies
|
|
Pull MMC fixes from Ulf Hansson:
"MMC core:
- Fix broken cache-flush support for Micron eMMCs
- Revert 'mmc: core: Capture correct oemid-bits for eMMC cards'
MMC host:
- sdhci_am654: Fix TAP value parsing for legacy speed mode
- sdhci-pci-gli: Fix support for ASPM mode for GL9755/GL9750
- vub300: Fix an error path in probe"
* tag 'mmc-v6.7-2' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc:
mmc: sdhci-pci-gli: GL9750: Mask the replay timer timeout of AER
mmc: sdhci-pci-gli: GL9755: Mask the replay timer timeout of AER
Revert "mmc: core: Capture correct oemid-bits for eMMC cards"
mmc: vub300: fix an error code
mmc: Add quirk MMC_QUIRK_BROKEN_CACHE_FLUSH for Micron eMMC Q2J54A
mmc: sdhci_am654: fix start loop index for TAP value parsing
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm
Pull pwm fixes from Thierry Reding:
"This contains two very small fixes that I failed to include in the
main pull request"
* tag 'pwm/for-6.7-rc1-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm:
pwm: Fix double shift bug
pwm: samsung: Fix a bit test in pwm_samsung_resume()
|
|
Pull io_uring fixes from Jens Axboe:
"Mostly just a few fixes and cleanups caused by the read multishot
support.
Outside of that, a stable fix for how a connect retry is done"
* tag 'io_uring-6.7-2023-11-10' of git://git.kernel.dk/linux:
io_uring: do not clamp read length for multishot read
io_uring: do not allow multishot read to set addr or len
io_uring: indicate if io_kbuf_recycle did recycle anything
io_uring/rw: add separate prep handler for fixed read/write
io_uring/rw: add separate prep handler for readv/writev
io_uring/net: ensure socket is marked connected on connect retry
io_uring/rw: don't attempt to allocate async data if opcode doesn't need it
|
|
Pull block fixes from Jens Axboe:
- NVMe pull request via Keith:
- nvme keyring config compile fixes (Hannes and Arnd)
- fabrics keep alive fixes (Hannes)
- tcp authentication fixes (Mark)
- io_uring_cmd error handling fix (Anuj)
- stale firmware attribute fix (Daniel)
- tcp memory leak (Christophe)
- crypto library usage simplification (Eric)
- nbd use-after-free fix. May need a followup, but at least it's better
than what it was before (Li)
- Rate limit write on read-only device warnings (Yu)
* tag 'block-6.7-2023-11-10' of git://git.kernel.dk/linux:
nvme: keyring: fix conditional compilation
nvme: common: make keyring and auth separate modules
blk-core: use pr_warn_ratelimited() in bio_check_ro()
nbd: fix uaf in nbd_open
nvme: start keep-alive after admin queue setup
nvme-loop: always quiesce and cancel commands before destroying admin q
nvme-tcp: avoid open-coding nvme_tcp_teardown_admin_queue()
nvme-auth: always set valid seq_num in dhchap reply
nvme-auth: add flag for bi-directional auth
nvme-auth: auth success1 msg always includes resp
nvme: fix error-handling for io_uring nvme-passthrough
nvme: update firmware version after commit
nvme-tcp: Fix a memory leak
nvme-auth: use crypto_shash_tfm_digest()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/libata
Pull ata fixes from Damien Le Moal:
- Revert a change in ata_pci_shutdown_one() to suspend disks on
shutdown as this is now done using the manage_shutdown scsi device
flag (me)
- Change the pata_falcon and pata_gayle drivers to stop using
module_platform_driver_probe(). This makes these drivers more inline
with all other drivers (allowing bind/unbind) and suppress a
compilation warning (Uwe)
- Convert the pata_falcon and pata_gayle drivers to the new
.remove_new() void-return callback. These 2 drivers are the last ones
needing this change (Uwe)
* tag 'ata-6.7-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/libata:
ata: pata_gayle: Convert to platform remove callback returning void
ata: pata_falcon: Convert to platform remove callback returning void
ata: pata_gayle: Stop using module_platform_driver_probe()
ata: pata_falcon: Stop using module_platform_driver_probe()
ata: libata-core: Fix ata_pci_shutdown_one()
|
