| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
The PWMF_REQUESTED enum is supposed to be used with test_bit() and not
used as in a bitwise AND. In this specific code the flag will never be
set so the function is effectively a no-op.
Fixes: e3fe982b2e4e ("pwm: samsung: Put per-channel data into driver data")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Sam Protsenko <semen.protsenko@linaro.org>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
|
|
wr_reg_wa() is not an appropriate name for a global function, and doesn't need
to be global anyway, so mark it static and avoid the warning:
drivers/video/fbdev/fsl-diu-fb.c:493:6: error: no previous prototype for 'wr_reg_wa' [-Werror=missing-prototypes]
Fixes: 0d9dab39fbbe ("powerpc/5121: fsl-diu-fb: fix issue with re-enabling DIU area descriptor")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
warning
As described in the added code comment, a reference to .exit.text is ok
for drivers registered via module_platform_driver_probe(). Make this
explicit to prevent a section mismatch warning.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
When multiple mounts are to the same share from the same client it was not
possible to determine which section of /proc/fs/cifs/Stats (and DebugData)
correspond to that mount. In some recent examples this turned out to be
a significant problem when trying to analyze performance data - since
there are many cases where unless we know the tree id and session id we
can't figure out which stats (e.g. number of SMB3.1.1 requests by type,
the total time they take, which is slowest, how many fail etc.) apply to
which mount. The only existing loosely related ioctl CIFS_IOC_GET_MNT_INFO
does not return the information needed to uniquely identify which tcon
is which mount although it does return various flags and device info.
Add a cifs.ko ioctl CIFS_IOC_GET_TCON_INFO (0x800ccf0c) to return tid,
session id, tree connect count.
Cc: stable@vger.kernel.org
Reviewed-by: Shyam Prasad N <sprasad@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
This is only used locally, so mark it static to avoid a warning:
drivers/parport/parport_gsc.c:395:5: error: no previous prototype for 'parport_gsc_init' [-Werror=missing-prototypes]
Acked-by: Helge Deller <deller@gmx.de>
Acked-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
When CONFIG_SYSFB is disabled, the hyperv_fb driver can now run into
undefined behavior on a gen2 VM, as indicated by this smatch warning:
drivers/video/fbdev/hyperv_fb.c:1077 hvfb_getmem() error: uninitialized symbol 'base'.
drivers/video/fbdev/hyperv_fb.c:1077 hvfb_getmem() error: uninitialized symbol 'size'.
Since there is no way to know the actual framebuffer in this configuration,
just return an allocation failure here, which should avoid the build
warning and the undefined behavior.
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Closes: https://lore.kernel.org/r/202311070802.YCpvehaz-lkp@intel.com/
Fixes: a07b50d80ab6 ("hyperv: avoid dependency on screen_info")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
returning void
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
suppress_bind_attrs
On today's platforms the memory savings of putting the remove function
in .exit isn't that relevant any more. It only matters for built-in
drivers and typically saves a few 100k.
The downside is that the driver cannot be unbound at runtime which is
ancient and also slightly complicates testing. Also it requires to mark
the driver struct with __refdata which is needed to suppress a (W=1)
modpost warning:
WARNING: modpost: drivers/video/fbdev/omap2/omapfb/displays/encoder-tpd12s015: section mismatch in reference: tpd_driver+0x4 (section: .data) -> tpd_remove (section: .exit.text)
To simplify matters, move the remove callback to .text and drop
.suppress_bind_attrs = true.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
suppress_bind_attrs
On today's platforms the memory savings of putting the remove function
in .exit isn't that relevant any more. It only matters for built-in
drivers and typically saves a few 100k.
The downside is that the driver cannot be unbound at runtime which is
ancient and also slightly complicates testing. Also it requires to mark
the driver struct with __refdata which is needed to suppress a (W=1)
modpost warning:
WARNING: modpost: drivers/video/fbdev/omap2/omapfb/displays/encoder-tfp410: section mismatch in reference: tfp410_driver+0x4 (section: .data) -> tfp410_remove (section: .exit.text)
To simplify matters, move the remove callback to .text and drop
.suppress_bind_attrs = true.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
suppress_bind_attrs
On today's platforms the memory savings of putting the remove function
in .exit isn't that relevant any more. It only matters for built-in
drivers and typically saves a few 100k.
The downside is that the driver cannot be unbound at runtime which is
ancient and also slightly complicates testing. Also it requires to mark
the driver struct with __refdata which is needed to suppress a (W=1)
modpost warning:
WARNING: modpost: drivers/video/fbdev/omap2/omapfb/displays/panel-sharp-ls037v7dw01: section mismatch in reference: sharp_ls_driver+0x4 (section: .data) -> sharp_ls_remove (section: .exit.text)
To simplify matters, move the remove callback to .text and drop
.suppress_bind_attrs = true.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
suppress_bind_attrs
On today's platforms the memory savings of putting the remove function
in .exit isn't that relevant any more. It only matters for built-in
drivers and typically saves a few 100k.
The downside is that the driver cannot be unbound at runtime which is
ancient and also slightly complicates testing. Also it requires to mark
the driver struct with __refdata which is needed to suppress a (W=1)
modpost warning:
WARNING: modpost: drivers/video/fbdev/omap2/omapfb/displays/encoder-tfp410: section mismatch in reference: tfp410_driver+0x4 (section: .data) -> tfp410_remove (section: .exit.text)
To simplify matters, move the remove callback to .text and drop
.suppress_bind_attrs = true.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
suppress_bind_attrs
On today's platforms the memory savings of putting the remove function
in .exit isn't that relevant any more. It only matters for built-in
drivers and typically saves a few 100k.
The downside is that the driver cannot be unbound at runtime which is
ancient and also slightly complicates testing. Also it requires to mark
the driver struct with __refdata which is needed to suppress a (W=1)
modpost warning:
WARNING: modpost: drivers/video/fbdev/omap2/omapfb/displays/connector-hdmi: section mismatch in reference: hdmi_connector_driver+0x4 (section: .data) -> hdmic_remove (section: .exit.text)
To simplify matters, move the remove callback to .text and drop
.suppress_bind_attrs = true.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
suppress_bind_attrs
On today's platforms the memory savings of putting the remove function
in .exit isn't that relevant any more. It only matters for built-in
drivers and typically saves a few 100k.
The downside is that the driver cannot be unbound at runtime which is
ancient and also slightly complicates testing. Also it requires to mark
the driver struct with __refdata which is needed to suppress a (W=1)
modpost warning:
WARNING: modpost: drivers/video/fbdev/omap2/omapfb/displays/connector-dvi: section mismatch in reference: dvi_connector_driver+0x4 (section: .data) -> dvic_remove (section: .exit.text)
To simplify matters, move the remove callback to .text and drop
.suppress_bind_attrs = true.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
suppress_bind_attrs
On today's platforms the memory savings of putting the remove function
in .exit isn't that relevant any more. It only matters for built-in
drivers and typically saves a few 100k.
The downside is that the driver cannot be unbound at runtime which is
ancient and also slightly complicates testing. Also it requires to mark
the driver struct with __refdata which is needed to suppress a (W=1)
modpost warning:
WARNING: modpost: drivers/video/fbdev/omap2/omapfb/displays/panel-dsi-cm: section mismatch in reference: dsicm_driver+0x4 (section: .data) -> dsicm_remove (section: .exit.text)
To simplify matters, move the remove callback to .text and drop
.suppress_bind_attrs = true.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
suppress_bind_attrs
On today's platforms the memory savings of putting the remove function
in .exit isn't that relevant any more. It only matters for built-in
drivers and typically saves a few 100k.
The downside is that the driver cannot be unbound at runtime which is
ancient and also slightly complicates testing. Also it requires to mark
the driver struct with __refdata which is needed to suppress a (W=1)
modpost warning:
WARNING: modpost: drivers/video/fbdev/omap2/omapfb/displays/panel-dpi: section mismatch in reference: panel_dpi_driver+0x4 (section: .data) -> panel_dpi_remove (section: .exit.text)
To simplify matters, move the remove callback to .text and drop
.suppress_bind_attrs = true.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
suppress_bind_attrs
On today's platforms the memory savings of putting the remove function
in .exit isn't that relevant any more. It only matters for built-in
drivers and typically saves a few 100k.
The downside is that the driver cannot be unbound at runtime which is
ancient and also slightly complicates testing. Also it requires to mark
the driver struct with __refdata which is needed to suppress a (W=1)
modpost warning:
WARNING: modpost: drivers/video/fbdev/omap2/omapfb/displays/connector-analog-tv: section mismatch in reference: tvc_connector_driver+0x4 (section: .data) -> tvc_remove (section: .exit.text)
To simplify matters, move the remove callback to .text and drop
.suppress_bind_attrs = true.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
On today's platforms the benefit of platform_driver_probe() isn't that
relevant any more. It allows to drop some code after booting (or module
loading) for .probe() and discard the .remove() function completely if
the driver is built-in. This typically saves a few 100k.
The downside of platform_driver_probe() is that the driver cannot be
bound and unbound at runtime which is ancient and also slightly
complicates testing. There are also thoughts to deprecate
platform_driver_probe() because it adds some complexity in the driver
core for little gain. Also many drivers don't use it correctly. This
driver for example misses to mark the driver struct with __refdata which
is needed to suppress a (W=1) modpost warning:
WARNING: modpost: drivers/video/fbdev/atmel_lcdfb: section mismatch in reference: atmel_lcdfb_driver+0x4 (section: .data) -> atmel_lcdfb_remove (section: .exit.text)
[folded in patch by Nathan Chancellor]
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from netfilter and bpf.
Current release - regressions:
- sched: fix SKB_NOT_DROPPED_YET splat under debug config
Current release - new code bugs:
- tcp:
- fix usec timestamps with TCP fastopen
- fix possible out-of-bounds reads in tcp_hash_fail()
- fix SYN option room calculation for TCP-AO
- tcp_sigpool: fix some off by one bugs
- bpf: fix compilation error without CGROUPS
- ptp:
- ptp_read() should not release queue
- fix tsevqs corruption
Previous releases - regressions:
- llc: verify mac len before reading mac header
Previous releases - always broken:
- bpf:
- fix check_stack_write_fixed_off() to correctly spill imm
- fix precision tracking for BPF_ALU | BPF_TO_BE | BPF_END
- check map->usercnt after timer->timer is assigned
- dsa: lan9303: consequently nested-lock physical MDIO
- dccp/tcp: call security_inet_conn_request() after setting IP addr
- tg3: fix the TX ring stall due to incorrect full ring handling
- phylink: initialize carrier state at creation
- ice: fix direction of VF rules in switchdev mode
Misc:
- fill in a bunch of missing MODULE_DESCRIPTION()s, more to come"
* tag 'net-6.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (84 commits)
net: ti: icss-iep: fix setting counter value
ptp: fix corrupted list in ptp_open
ptp: ptp_read should not release queue
net_sched: sch_fq: better validate TCA_FQ_WEIGHTS and TCA_FQ_PRIOMAP
net: kcm: fill in MODULE_DESCRIPTION()
net/sched: act_ct: Always fill offloading tuple iifidx
netfilter: nat: fix ipv6 nat redirect with mapped and scoped addresses
netfilter: xt_recent: fix (increase) ipv6 literal buffer length
ipvs: add missing module descriptions
netfilter: nf_tables: remove catchall element in GC sync path
netfilter: add missing module descriptions
drivers/net/ppp: use standard array-copy-function
net: enetc: shorten enetc_setup_xdp_prog() error message to fit NETLINK_MAX_FMTMSG_LEN
virtio/vsock: Fix uninit-value in virtio_transport_recv_pkt()
r8169: respect userspace disabling IFF_MULTICAST
selftests/bpf: get trusted cgrp from bpf_iter__cgroup directly
bpf: Let verifier consider {task,cgroup} is trusted in bpf_iter_reg
net: phylink: initialize carrier state at creation
test/vsock: add dobule bind connect test
test/vsock: refactor vsock_accept
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6
Pull crypto fixes from Herbert Xu:
"This fixes a regression in ahash and hides the Kconfig sub-options for
the jitter RNG"
* tag 'v6.7-p2' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
crypto: ahash - Set using_shash for cloned ahash wrapper over shash
crypto: jitterentropy - Hide esoteric Kconfig options under FIPS and EXPERT
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
Pull input updates from Dmitry Torokhov:
- a number of input drivers has been converted to use facilities
provided by the device core to instantiate driver-specific attributes
instead of using devm_device_add_group() and similar APIs
- platform input devices have been converted to use remove() callback
returning void
- a fix for use-after-free when tearing down a Synaptics RMI device
- a few flexible arrays in input structures have been annotated with
__counted_by to help hardening efforts
- handling of vddio supply in cyttsp5 driver
- other miscellaneous fixups
* tag 'input-for-v6.7-rc0' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (86 commits)
Input: walkera0701 - use module_parport_driver macro to simplify the code
Input: synaptics-rmi4 - fix use after free in rmi_unregister_function()
dt-bindings: input: fsl,scu-key: Document wakeup-source
Input: cyttsp5 - add handling for vddio regulator
dt-bindings: input: cyttsp5: document vddio-supply
Input: tegra-kbc - use device_get_match_data()
Input: Annotate struct ff_device with __counted_by
Input: axp20x-pek - avoid needless newline removal
Input: mt - annotate struct input_mt with __counted_by
Input: leds - annotate struct input_leds with __counted_by
Input: evdev - annotate struct evdev_client with __counted_by
Input: synaptics-rmi4 - replace deprecated strncpy
Input: wm97xx-core - convert to platform remove callback returning void
Input: wm831x-ts - convert to platform remove callback returning void
Input: ti_am335x_tsc - convert to platform remove callback returning void
Input: sun4i-ts - convert to platform remove callback returning void
Input: stmpe-ts - convert to platform remove callback returning void
Input: pcap_ts - convert to platform remove callback returning void
Input: mc13783_ts - convert to platform remove callback returning void
Input: mainstone-wm97xx - convert to platform remove callback returning void
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
Pull more i2c updates from Wolfram Sang:
"This contains one patch which slipped through the cracks (iproc), a
core sanitizing improvement as the new memdup_array_user() helper went
upstream (i2c-dev), and two driver bugfixes (designware, cp2615)"
* tag 'for-6.7-rc1-part2' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
i2c: cp2615: Fix 'assignment to __be16' warning
i2c: dev: copy userspace array safely
i2c: designware: Disable TX_EMPTY irq while waiting for block length byte
i2c: iproc: handle invalid slave state
|
|
W/RREG32_RLC is hardedcoded to use instance 0. W/RREG32_SOC15_RLC
should be used instead when inst != 0.
v2: rebase
Signed-off-by: Victor Lu <victorchengchi.lu@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
amdgpu_kiq_wreg/rreg is hardcoded to use MEC engine 0.
Add an xcc_id parameter to amdgpu_kiq_wreg/rreg, define W/RREG32_XCC
and amdgpu_device_xcc_wreg/rreg to use the new xcc_id parameter.
Using amdgpu_sriov_runtime to determine whether to access via kiq or
RLC is sufficient for now.
v5: add condition in amdgpu_device_xcc_w/rreg, remove trace func call
v4: avoid using amdgpu_sriov_w/rreg
v3: use W/RREG32_XCC to handle non-kiq case
v2: define amdgpu_device_xcc_wreg/rreg instead of changing parameters
of amdgpu_device_wreg/rreg
Signed-off-by: Victor Lu <victorchengchi.lu@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
add pcs xgmi ras error query support for smu v13.0.6.
Signed-off-by: Yang Wang <kevinyang.wang@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
When software 'pci unplug' using IGT is executed we got a sysfs directory
entry is NULL for differant ras blocks like hdp, umc, etc.
Before call 'sysfs_remove_file_from_group' and 'sysfs_remove_group'
check that 'sd' is not NULL.
[ +0.000001] RIP: 0010:sysfs_remove_group+0x83/0x90
[ +0.000002] Code: 31 c0 31 d2 31 f6 31 ff e9 9a a8 b4 00 4c 89 e7 e8 f2 a2 ff ff eb c2 49 8b 55 00 48 8b 33 48 c7 c7 80 65 94 82 e8 cd 82 bb ff <0f> 0b eb cc 66 0f 1f 84 00 00 00 00 00 90 90 90 90 90 90 90 90 90
[ +0.000001] RSP: 0018:ffffc90002067c90 EFLAGS: 00010246
[ +0.000002] RAX: 0000000000000000 RBX: ffffffff824ea180 RCX: 0000000000000000
[ +0.000001] RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000000
[ +0.000001] RBP: ffffc90002067ca8 R08: 0000000000000000 R09: 0000000000000000
[ +0.000001] R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000000
[ +0.000001] R13: ffff88810a395f48 R14: ffff888101aab0d0 R15: 0000000000000000
[ +0.000001] FS: 00007f5ddaa43a00(0000) GS:ffff88841e800000(0000) knlGS:0000000000000000
[ +0.000002] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ +0.000001] CR2: 00007f8ffa61ba50 CR3: 0000000106432000 CR4: 0000000000350ef0
[ +0.000001] Call Trace:
[ +0.000001] <TASK>
[ +0.000001] ? show_regs+0x72/0x90
[ +0.000002] ? sysfs_remove_group+0x83/0x90
[ +0.000002] ? __warn+0x8d/0x160
[ +0.000001] ? sysfs_remove_group+0x83/0x90
[ +0.000001] ? report_bug+0x1bb/0x1d0
[ +0.000003] ? handle_bug+0x46/0x90
[ +0.000001] ? exc_invalid_op+0x19/0x80
[ +0.000002] ? asm_exc_invalid_op+0x1b/0x20
[ +0.000003] ? sysfs_remove_group+0x83/0x90
[ +0.000001] dpm_sysfs_remove+0x61/0x70
[ +0.000002] device_del+0xa3/0x3d0
[ +0.000002] ? ktime_get_mono_fast_ns+0x46/0xb0
[ +0.000002] device_unregister+0x18/0x70
[ +0.000001] i2c_del_adapter+0x26d/0x330
[ +0.000002] arcturus_i2c_control_fini+0x25/0x50 [amdgpu]
[ +0.000236] smu_sw_fini+0x38/0x260 [amdgpu]
[ +0.000241] amdgpu_device_fini_sw+0x116/0x670 [amdgpu]
[ +0.000186] ? mutex_lock+0x13/0x50
[ +0.000003] amdgpu_driver_release_kms+0x16/0x40 [amdgpu]
[ +0.000192] drm_minor_release+0x4f/0x80 [drm]
[ +0.000025] drm_release+0xfe/0x150 [drm]
[ +0.000027] __fput+0x9f/0x290
[ +0.000002] ____fput+0xe/0x20
[ +0.000002] task_work_run+0x61/0xa0
[ +0.000002] exit_to_user_mode_prepare+0x150/0x170
[ +0.000002] syscall_exit_to_user_mode+0x2a/0x50
Cc: Hawking Zhang <hawking.zhang@amd.com>
Cc: Luben Tuikov <luben.tuikov@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Christian Koenig <christian.koenig@amd.com>
Signed-off-by: Vitaly Prosyak <vitaly.prosyak@amd.com>
Reviewed-by: Luben Tuikov <luben.tuikov@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Spotted by coccicheck, there is a redundant check for
v->SourcePixelFormat[k] != dm_444_16. This patch will
remove it. The corresponding output follows.
drivers/gpu/drm/amd/display/dc/dml/dcn30/display_mode_vba_30.c:5130:86-122: duplicated argument to && or ||
Signed-off-by: José Pekkarinen <jose.pekkarinen@foxhound.fi>
Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
avoid driver to touch invalid mca reg.
Signed-off-by: Yang Wang <kevinyang.wang@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
So driver doesn't touch invalid aca entries.
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Yang Wang <kevinyang.wang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
add pcs xgmi v6.4.0 ras support
Signed-off-by: Yang Wang <kevinyang.wang@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Change local memory type to MTYPE_UC on revision id 0
Signed-off-by: David Yat Sin <David.YatSin@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
disable mca debug mode for smu v13.0.6 by default.
Signed-off-by: Yang Wang <kevinyang.wang@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Direct error query mode and firmware error query mode
are supported for now.
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Yang Wang <kevinyang.wang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
refine smu mca driver to support query ras error from pmfw path.
- correct gfx smu bank hwid (from mp5 to smu bank)
- retire unused callback function in amdgpu_mca_smu_funcs{}
- add new mca_bank_set{} structure to collect mca bank
- move enum mca_reg_idx into amdgpu_mca.h header
- add mca status register field decode macro
Signed-off-by: Yang Wang <kevinyang.wang@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
The following regs can only be programmed by the PF:
HDP_MISC_CNTL
HDP_NONSURFACE_BASE
HDP_NONSURFACE_BASE_HI
v2: update commit message
Signed-off-by: Victor Lu <victorchengchi.lu@amd.com>
Reviewed-by: Samir Dhume <samir.dhume@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
PCTL0_MMHUB_DEEPSLEEP_IB is blocked for VF access
Signed-off-by: Victor Lu <victorchengchi.lu@amd.com>
Reviewed-by: Samir Dhume <samir.dhume@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Resolves Sphinx unexpected indentation warning when compiling
documentation (e.g. `make htmldocs`). Replaces tabs with spaces and adds
a literal block to keep vertical formatting of the
example power state list.
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Bagas Sanjaya <bagasdotme@gmail.com> (v2)
Acked-by: Randy Dunlap <rdunlap@infradead.org> (v2)
Signed-off-by: Hunter Chasens <hunter.chasens18@ncf.edu>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
correct smu v13.0.0 umc ras error check
Signed-off-by: Yang Wang <kevinyang.wang@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
WREG32/RREG32_SOC15_IP_NO_KIQ and amdgpu_virt_kiq_reg_write_reg_wait
are not using the correct rlcg interface or mec engine, respectively.
Add xcc instance parameter to them.
v4: Use GET_INST and squash commit with:
"drm/amdgpu: Add xcc_inst param to amdgpu_virt_kiq_reg_write_reg_wait"
v3: xcc not needed for MMMHUB
v2: rebase
Signed-off-by: Victor Lu <victorchengchi.lu@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
The "rlcg_reg_access_supported" flag is missing. Add it back in.
Signed-off-by: Victor Lu <victorchengchi.lu@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
The DS clock may exceed the limit as sclk dfll divider is 16
to target freq.
Signed-off-by: Le Ma <le.ma@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Yang Wang <kevinyang.wang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
