| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
https://gitlab.freedesktop.org/agd5f/linux into drm-fixes
amd-drm-fixes-6.8-2024-02-01:
amdgpu:
- Fix reboot issue seen on some 7000 series dGPUs
- Fix client init order for KFD
- Misc display fixes
- USB-C fix
- DCN 3.5 fixes
- Fix issues with GPU scheduler and GPU reset
- GPU firmware loading fix
- Misc fixes
- GC 11.5 fix
- VCN 4.0.5 fix
- IH overflow fix
amdkfd:
- SVM fixes
- Trap handler fix
- Fix device permission lookup
- Properly reserve BO before validating it
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240201184108.4923-1-alexander.deucher@amd.com
|
|
Since ext4_map_blocks() can recognize a delayed allocated only extent,
make ext4_set_iomap() can also recognize it, and remove the useless
separate check in ext4_iomap_begin_report().
Signed-off-by: Zhang Yi <yi.zhang@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20240127015825.1608160-7-yi.zhang@huaweicloud.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
Add a new map flag EXT4_MAP_DELAYED to indicate the mapping range is a
delayed allocated only (not unwritten) one, and making
ext4_map_blocks() can distinguish it, no longer mixing it with holes.
Signed-off-by: Zhang Yi <yi.zhang@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20240127015825.1608160-6-yi.zhang@huaweicloud.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
In order to cache hole extents in the extent status tree and keep the
hole length as long as possible, re-add a hole entry to the cache just
after punching a hole.
Signed-off-by: Zhang Yi <yi.zhang@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20240127015825.1608160-5-yi.zhang@huaweicloud.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
After commit 936e4d49ecbc ("Input: atkbd - skip ATKBD_CMD_GETID in
translated mode") not only the getid command is skipped, but also
the de-activating of the keyboard at the end of atkbd_probe(), potentially
re-introducing the problem fixed by commit be2d7e4233a4 ("Input: atkbd -
fix multi-byte scancode handling on reconnect").
Make sure multi-byte scancode handling on reconnect is still handled
correctly by not skipping the atkbd_deactivate() call.
Fixes: 936e4d49ecbc ("Input: atkbd - skip ATKBD_CMD_GETID in translated mode")
Tested-by: Paul Menzel <pmenzel@molgen.mpg.de>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20240126160724.13278-3-hdegoede@redhat.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
After commit 936e4d49ecbc ("Input: atkbd - skip ATKBD_CMD_GETID in
translated mode") the keyboard on Dell XPS 13 9350 / 9360 / 9370 models
has stopped working after a suspend/resume.
The problem appears to be that atkbd_probe() fails when called
from atkbd_reconnect() on resume, which on systems where
ATKBD_CMD_GETID is skipped can only happen by ATKBD_CMD_SETLEDS
failing. ATKBD_CMD_SETLEDS failing because ATKBD_CMD_GETID was
skipped is weird, but apparently that is what is happening.
Fix this by also skipping ATKBD_CMD_SETLEDS when skipping
ATKBD_CMD_GETID.
Fixes: 936e4d49ecbc ("Input: atkbd - skip ATKBD_CMD_GETID in translated mode")
Reported-by: Paul Menzel <pmenzel@molgen.mpg.de>
Closes: https://lore.kernel.org/linux-input/0aa4a61f-c939-46fe-a572-08022e8931c7@molgen.mpg.de/
Closes: https://bbs.archlinux.org/viewtopic.php?pid=2146300
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=218424
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=2260517
Tested-by: Paul Menzel <pmenzel@molgen.mpg.de>
Cc: stable@vger.kernel.org
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20240126160724.13278-2-hdegoede@redhat.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
In ext4_map_blocks(), if we can't find a range of mapping in the
extents cache, we are calling ext4_ext_map_blocks() to search the real
path and ext4_ext_determine_hole() to determine the hole range. But if
the querying range was partially or completely overlaped by a delalloc
extent, we can't find it in the real extent path, so the returned hole
length could be incorrect.
Fortunately, ext4_ext_put_gap_in_cache() have already handle delalloc
extent, but it searches start from the expanded hole_start, doesn't
start from the querying range, so the delalloc extent found could not be
the one that overlaped the querying range, plus, it also didn't adjust
the hole length. Let's just remove ext4_ext_put_gap_in_cache(), handle
delalloc and insert adjusted hole extent in ext4_ext_determine_hole().
Signed-off-by: Zhang Yi <yi.zhang@huawei.com>
Suggested-by: Jan Kara <jack@suse.cz>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20240127015825.1608160-4-yi.zhang@huaweicloud.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
ext4_da_map_blocks() only hold i_data_sem in shared mode and i_rwsem
when inserting delalloc extents, it could be raced by another querying
path of ext4_map_blocks() without i_rwsem, .e.g buffered read path.
Suppose we buffered read a file containing just a hole, and without any
cached extents tree, then it is raced by another delayed buffered write
to the same area or the near area belongs to the same hole, and the new
delalloc extent could be overwritten to a hole extent.
pread() pwrite()
filemap_read_folio()
ext4_mpage_readpages()
ext4_map_blocks()
down_read(i_data_sem)
ext4_ext_determine_hole()
//find hole
ext4_ext_put_gap_in_cache()
ext4_es_find_extent_range()
//no delalloc extent
ext4_da_map_blocks()
down_read(i_data_sem)
ext4_insert_delayed_block()
//insert delalloc extent
ext4_es_insert_extent()
//overwrite delalloc extent to hole
This race could lead to inconsistent delalloc extents tree and
incorrect reserved space counter. Fix this by converting to hold
i_data_sem in exclusive mode when adding a new delalloc extent in
ext4_da_map_blocks().
Cc: stable@vger.kernel.org
Signed-off-by: Zhang Yi <yi.zhang@huawei.com>
Suggested-by: Jan Kara <jack@suse.cz>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20240127015825.1608160-3-yi.zhang@huaweicloud.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
Refactor and cleanup ext4_da_map_blocks(), reduce some unnecessary
parameters and branches, no logic changes.
Signed-off-by: Zhang Yi <yi.zhang@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20240127015825.1608160-2-yi.zhang@huaweicloud.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
https://gitlab.freedesktop.org/drm/xe/kernel into drm-fixes
UAPI Changes:
- Only allow a single user-fence per exec / bind.
The reason for this clarification fix is a limitation in the implementation
which can be lifted moving forward, if needed.
Driver Changes:
- A crash fix
- A fix for an assert due to missing mem_acces ref
- Only allow a single user-fence per exec / bind.
- Some sparse warning fixes
- Two fixes for compilation failures on various odd
combinations of gcc / arch pointed out on LKML.
- Fix a fragile partial allocation pointed out on LKML.
Cross-driver Change:
- A sysfs ABI documentation warning fix
This also touches i915 and is acked by i915 maintainers.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Thomas Hellstrom <thomas.hellstrom@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/ZbuCYdMDVK-kAWC5@fedora
|
|
git://anongit.freedesktop.org/drm/drm-misc into drm-fixes
A quiet week: one fix for CMA dma-buf pages accounting, and one to
virtio to set the segment size of the virtio_gpu device.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maxime Ripard <mripard@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/obnofpccz73c3uiqfyipxmjta5fgm4cle55dmtnissgtgxfgv7@22o7kb62efri
|
|
It turns out it was never just gcc-11 that was broken. Apparently it
just happens to work on x86-64 with other gcc versions.
On arm64, I see warnings with gcc version 13.2.1, and the kernel test
robot reports the same problem on s390 with gcc 13.2.0.
Admittedly it seems to be just the new Xe drm driver, but this is
keeping me from doing my normal arm64 build testing. So it gets
reverted until somebody figures out what causes the problem (and why it
doesn't show on x86-64, which is what makes me suspect it was never just
about gcc-11, and more about just random happenstance).
This also changes the Kconfig naming a bit - just make the "disable this
for GCC" conditional be one simple Kconfig entry, and we can put the gcc
version dependencies in that entry once we figure out what the correct
rules are.
The version dependency _may_ still end up being "gcc version larger than
11" if the issue is purely in the Xe driver, but even if that ends up
the case, let's make that all part of the "GCC_NO_STRINGOP_OVERFLOW"
logic.
For now, we just disable it for all gcc versions while the exact cause
is unknown.
Link: https://lore.kernel.org/all/202401161031.hjGJHMiJ-lkp@intel.com/T/
Cc: Gustavo A. R. Silva <gustavoars@kernel.org>
Cc: Kees Cook <keescook@chromium.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from netfilter.
As Paolo promised we continue to hammer out issues in our selftests.
This is not the end but probably the peak.
Current release - regressions:
- smc: fix incorrect SMC-D link group matching logic
Current release - new code bugs:
- eth: bnxt: silence WARN() when device skips a timestamp, it happens
Previous releases - regressions:
- ipmr: fix null-deref when forwarding mcast packets
- conntrack: evaluate window negotiation only for packets in the
REPLY direction, otherwise SYN retransmissions trigger incorrect
window scale negotiation
- ipset: fix performance regression in swap operation
Previous releases - always broken:
- tcp: add sanity checks to types of pages getting into the rx
zerocopy path, we only support basic NIC -> user, no page cache
pages etc.
- ip6_tunnel: make sure to pull inner header in __ip6_tnl_rcv()
- nt_tables: more input sanitization changes
- dsa: mt7530: fix 10M/100M speed on MediaTek MT7988 switch
- bridge: mcast: fix loss of snooping after long uptime, jiffies do
wrap on 32bit
- xen-netback: properly sync TX responses, protect with locking
- phy: mediatek-ge-soc: sync calibration values with MediaTek SDK,
increase connection stability
- eth: pds: fixes for various teardown, and reset races
Misc:
- hsr: silence WARN() if we can't alloc supervision frame, it
happens"
* tag 'net-6.8-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (82 commits)
doc/netlink/specs: Add missing attr in rt_link spec
idpf: avoid compiler padding in virtchnl2_ptype struct
selftests: mptcp: join: stop transfer when check is done (part 2)
selftests: mptcp: join: stop transfer when check is done (part 1)
selftests: mptcp: allow changing subtests prefix
selftests: mptcp: decrease BW in simult flows
selftests: mptcp: increase timeout to 30 min
selftests: mptcp: add missing kconfig for NF Mangle
selftests: mptcp: add missing kconfig for NF Filter in v6
selftests: mptcp: add missing kconfig for NF Filter
mptcp: fix data re-injection from stale subflow
selftests: net: enable some more knobs
selftests: net: add missing config for NF_TARGET_TTL
selftests: forwarding: List helper scripts in TEST_FILES Makefile variable
selftests: net: List helper scripts in TEST_FILES Makefile variable
selftests: net: Remove executable bits from library scripts
selftests: bonding: Check initial state
selftests: team: Add missing config options
hv_netvsc: Fix race condition between netvsc_probe and netvsc_remove
xen-netback: properly sync TX responses
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux
Pull parisc architecture fixes from Helge Deller:
"The current exception handler, which helps on kernel accesses to
userspace, may exhibit data corruption. The problem is that it is not
guaranteed that the compiler will use the processor register we
specified in the source code, but may choose another register which
then will lead to silent register- and data corruption. To fix this
issue we now use another strategy to help the exception handler to
always find and set the error code into the correct CPU register.
The other fixes are small: fixing CPU hotplug bringup, fix the page
alignment of the RO_DATA section, added a check for the calculated
cache stride and fix possible hangups when printing longer output at
bootup when running on serial console.
Most of the patches are tagged for stable series.
- Fix random data corruption triggered by exception handler
- Fix crash when setting up BTLB at CPU bringup
- Prevent hung tasks when printing inventory on serial console
- Make RO_DATA page aligned in vmlinux.lds.S
- Add check for valid cache stride size"
* tag 'parisc-for-6.8-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux:
parisc: BTLB: Fix crash when setting up BTLB at CPU bringup
parisc: Fix random data corruption from exception handler
parisc: Drop unneeded semicolon in parse_tree_node()
parisc: Prevent hung tasks when printing inventory on serial console
parisc: Check for valid stride size for cache flushes
parisc: Make RO_DATA page aligned in vmlinux.lds.S
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild fixes from Masahiro Yamada:
- Fix UML build with clang-18 and newer
- Avoid using the alias attribute in host programs
- Replace tabs with spaces when followed by conditionals for future GNU
Make versions
- Fix rpm-pkg for the systemd-provided kernel-install tool
- Fix the undefined behavior in Kconfig for a 'int' symbol used in a
conditional
* tag 'kbuild-fixes-v6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
kconfig: initialize sym->curr.tri to 'no' for all symbol types again
kbuild: rpm-pkg: simplify installkernel %post
kbuild: Replace tabs with spaces when followed by conditionals
modpost: avoid using the alias attribute
kbuild: fix W= flags in the help message
modpost: Add '.ltext' and '.ltext.*' to TEXT_SECTIONS
um: Fix adding '-no-pie' for clang
kbuild: defconf: use SRCARCH to find merged configs
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux
Pull nfsd fix from Chuck Lever:
- Fix a recent backchannel timeout fix
* tag 'nfsd-6.8-2' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux:
NFSv4.1: Assign the right value for initval and retries for rpc timeout
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/linkinjeon/exfat
Pull exfat fix from Namjae Jeon:
- Fix BUG in iov_iter_revert reported from syzbot
* tag 'exfat-for-6.8-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/linkinjeon/exfat:
exfat: fix zero the unwritten part for dio read
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus
ASoC: Fixes for v6.8
This pull request adds Richard Fitzgerald's series with extensive fixes
for the CS35L56, he said:
These patches fix various things that were undocumented, unknown or
uncertain when the original driver code was written. And also a few
things that were just bugs.
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid
Pull HID fixes from Benjamin Tissoires:
- cleanups in the error path in hid-steam (Dan Carpenter)
- fixes for Wacom tablets selftests that sneaked in while the CI was
taking a break during the year end holidays (Benjamin Tissoires)
- null pointer check in nvidia-shield (Kunwu Chan)
- memory leak fix in hidraw (Su Hui)
- another null pointer fix in i2c-hid-of (Johan Hovold)
- another memory leak fix in HID-BPF this time, as well as a double
fdget() fix reported by Dan Carpenter (Benjamin Tissoires)
- fix for Cirque touchpad when they go on suspend (Kai-Heng Feng)
- new device ID in hid-logitech-hidpp: "Logitech G Pro X SuperLight 2"
(Jiri Kosina)
* tag 'hid-for-linus-2024020101' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid:
HID: bpf: use __bpf_kfunc instead of noinline
HID: bpf: actually free hdev memory after attaching a HID-BPF program
HID: bpf: remove double fdget()
HID: i2c-hid-of: fix NULL-deref on failed power up
HID: hidraw: fix a problem of memory leak in hidraw_release()
HID: i2c-hid: Skip SET_POWER SLEEP for Cirque touchpad on system suspend
HID: nvidia-shield: Add missing null pointer checks to LED initialization
HID: logitech-hidpp: add support for Logitech G Pro X Superlight 2
selftests/hid: wacom: fix confidence tests
HID: hid-steam: Fix cleanup in probe()
HID: hid-steam: remove pointless error message
|
|
With the introduction of SMB2_OP_QUERY_WSL_EA, the client may now send
5 commands in a single compound request in order to query xattrs from
potential WSL reparse points, which should be fine as we currently
allow up to 5 PDUs in a single compound request. However, if
encryption is enabled (e.g. 'seal' mount option) or enforced by the
server, current MAX_COMPOUND(5) won't be enough as we require an extra
PDU for the transform header.
Fix this by increasing MAX_COMPOUND to 7 and, while we're at it, add
an WARN_ON_ONCE() and return -EIO instead of -ENOMEM in case we
attempt to send a compound request that couldn't include the extra
transform header.
Signed-off-by: Paulo Alcantara <pc@manguebit.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
After the interface selection policy change to do a weighted
round robin, each iface maintains a weight_fulfilled. When the
weight_fulfilled reaches the total weight for the iface, we know
that the weights can be reset and ifaces can be allocated from
scratch again.
During channel allocation failures on a particular channel,
weight_fulfilled is not incremented. If a few interfaces are
inactive, we could end up in a situation where the active
interfaces are all allocated for the total_weight, and inactive
ones are all that remain. This can cause a situation where
no more channels can be allocated further.
This change fixes it by increasing weight_fulfilled, even when
channel allocation failure happens. This could mean that if
there are temporary failures in channel allocation, the iface
weights may not strictly be adhered to. But that's still okay.
Fixes: a6d8fb54a515 ("cifs: distribute channels across interfaces based on speed")
Signed-off-by: Shyam Prasad N <sprasad@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394
Pull firewire fixes from Takashi Sakamoto:
"FireWire subsystem now supports the legacy layout of configuration
ROM, while it appears that some of DV devices in the early 2000's have
the legacy layout with a quirk. This includes some changes to handle
the quirk"
* tag 'firewire-fixes-6.8-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394:
firewire: core: search descriptor leaf just after vendor directory entry in root directory
firewire: core: correct documentation of fw_csr_string() kernel API
|
|
In order to scale down the channels, the following sequence
of operations happen:
1. server struct is marked for terminate
2. the channel is deallocated in the ses->chans array
3. at a later point the cifsd thread actually terminates the server
Between 2 and 3, there can be calls to find the channel for
a server struct. When that happens, there can be an ugly warning
that's logged. But this is expected.
So this change does two things:
1. in cifs_ses_get_chan_index, if server->terminate is set, return
2. always make sure server->terminate is set with chan_lock held
Signed-off-by: Shyam Prasad N <sprasad@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
When the server reports query network interface info call
as unsupported following a tree connect, it means that
multichannel is unsupported, even if the server capabilities
report otherwise.
When this happens, cifs_chan_skip_or_disable is called to
disable multichannel on the client. However, we only need
to call this when multichannel is currently setup.
Fixes: f591062bdbf4 ("cifs: handle servers that still advertise multichannel after disabling")
Signed-off-by: Shyam Prasad N <sprasad@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi
Pull spi fix from Mark Brown:
"One simple fix for a minor but valid issue with constants overflowing
identified via cppcheck"
* tag 'spi-fix-v6.8-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
spi: sh-msiof: avoid integer overflow in constants
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator
Pull regulator fixes from Mark Brown:
"The main set of fixes here are for the PWM regulator, fixing
bootstrapping issues on some platforms where the hardware setup looked
like it was out of spec for the constraints we have for the regulator
causing us to make spurious and unhelpful changes to try to bring
things in line with the constraints.
There's also a couple of other driver specific fixes"
* tag 'regulator-fix-v6.8-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator:
regulator (max5970): Fix IRQ handler
regulator: ti-abb: don't use devm_platform_ioremap_resource_byname for shared interrupt register
regulator: pwm-regulator: Manage boot-on with disabled PWM channels
regulator: pwm-regulator: Calculate the output voltage for disabled PWMs
regulator: pwm-regulator: Add validity checks in continuous .get_voltage
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6
Pull crypto fixes from Herbert Xu:
"Fix regressions in caam and qat"
* tag 'v6.8-p2' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
crypto: caam - fix asynchronous hash
crypto: qat - fix arbiter mapping generation algorithm for QAT 402xx
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/lsm
Pull lsm fixes from Paul Moore:
"Two small patches to fix some problems relating to LSM hook return
values and how the individual LSMs interact"
* tag 'lsm-pr-20240131' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/lsm:
lsm: fix default return value of the socket_getpeersec_*() hooks
lsm: fix the logic in security_inode_getsecctx()
|
|
Commit 82b74cac2849 ("blk-ioprio: Convert from rqos policy to direct
call") pushed setting bio I/O priority down into blk_mq_submit_bio()
-- which is too low within block core's submit_bio() because it
skips setting I/O priority for block drivers that implement
fops->submit_bio() (e.g. DM, MD, etc).
Fix this by moving bio_set_ioprio() up from blk-mq.c to blk-core.c and
call it from submit_bio(). This ensures all block drivers call
bio_set_ioprio() during initial bio submission.
Fixes: a78418e6a04c ("block: Always initialize bio IO priority on submit")
Co-developed-by: Yibin Ding <yibin.ding@unisoc.com>
Signed-off-by: Yibin Ding <yibin.ding@unisoc.com>
Signed-off-by: Hongyu Jin <hongyu.jin@unisoc.com>
Reviewed-by: Eric Biggers <ebiggers@google.com>
Reviewed-by: Mikulas Patocka <mpatocka@redhat.com>
[snitzer: revised commit header]
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20240130202638.62600-2-snitzer@kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Merge series from Richard Fitzgerald <rf@opensource.cirrus.com>:
These patches fixe various things that were undocumented, unknown or
uncertain when the original driver code was written. And also a few
things that were just bugs.
|
|
git://git.open-mesh.org/linux-merge
Simon Wunderlich says:
====================
Here are some batman-adv bugfixes:
- fix a timeout issue and a memory leak in batman-adv multicast,
by Linus Lüssing (2 patches)
* tag 'batadv-net-pullrequest-20240201' of git://git.open-mesh.org/linux-merge:
batman-adv: mcast: fix memory leak on deleting a batman-adv interface
batman-adv: mcast: fix mcast packet type counter on timeouted nodes
====================
Link: https://lore.kernel.org/r/20240201110110.29129-1-sw@simonwunderlich.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
IFLA_DPLL_PIN was added to rt_link messages but not to the spec, which
breaks ynl. Add the missing definitions to the rt_link ynl spec.
Fixes: 5f1842692880 ("netdev: expose DPLL pin handle for netdevice")
Signed-off-by: Donald Hunter <donald.hunter@gmail.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Link: https://lore.kernel.org/r/20240201113853.37432-1-donald.hunter@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf
Pablo Neira Ayuso says:
====================
Netfilter fixes for net
1) TCP conntrack now only evaluates window negotiation for packets in
the REPLY direction, from Ryan Schaefer. Otherwise SYN retransmissions
trigger incorrect window scale negotiation. From Ryan Schaefer.
2) Restrict tunnel objects to NFPROTO_NETDEV which is where it makes sense
to use this object type.
3) Fix conntrack pick up from the middle of SCTP_CID_SHUTDOWN_ACK packets.
From Xin Long.
4) Another attempt from Jozsef Kadlecsik to address the slow down of the
swap command in ipset.
5) Replace a BUG_ON by WARN_ON_ONCE in nf_log, and consolidate check for
the case that the logger is NULL from the read side lock section.
6) Address lack of sanitization for custom expectations. Restrict layer 3
and 4 families to what it is supported by userspace.
* tag 'nf-24-01-31' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf:
netfilter: nft_ct: sanitize layer 3 and 4 protocol number in custom expectations
netfilter: nf_log: replace BUG_ON by WARN_ON_ONCE when putting logger
netfilter: ipset: fix performance regression in swap operation
netfilter: conntrack: check SCTP_CID_SHUTDOWN_ACK for vtag setting in sctp_new
netfilter: nf_tables: restrict tunnel object to NFPROTO_NETDEV
netfilter: conntrack: correct window scaling with retransmitted SYN
====================
Link: https://lore.kernel.org/r/20240131225943.7536-1-pablo@netfilter.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
In the arm random config file, kconfig option 'CONFIG_AEABI' is
disabled which results in adding the compiler flag '-mabi=apcs-gnu'.
This causes the compiler to add padding in virtchnl2_ptype
structure to align it to 8 bytes, resulting in the following
size check failure:
include/linux/build_bug.h:78:41: error: static assertion failed: "(6) == sizeof(struct virtchnl2_ptype)"
78 | #define __static_assert(expr, msg, ...) _Static_assert(expr, msg)
| ^~~~~~~~~~~~~~
include/linux/build_bug.h:77:34: note: in expansion of macro '__static_assert'
77 | #define static_assert(expr, ...) __static_assert(expr, ##__VA_ARGS__, #expr)
| ^~~~~~~~~~~~~~~
drivers/net/ethernet/intel/idpf/virtchnl2.h:26:9: note: in expansion of macro 'static_assert'
26 | static_assert((n) == sizeof(struct X))
| ^~~~~~~~~~~~~
drivers/net/ethernet/intel/idpf/virtchnl2.h:982:1: note: in expansion of macro 'VIRTCHNL2_CHECK_STRUCT_LEN'
982 | VIRTCHNL2_CHECK_STRUCT_LEN(6, virtchnl2_ptype);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~
Avoid the compiler padding by using "__packed" structure
attribute for the virtchnl2_ptype struct. Also align the
structure by using "__aligned(2)" for better code optimization.
Fixes: 0d7502a9b4a7 ("virtchnl: add virtchnl version 2 ops")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202312220250.ufEm8doQ-lkp@intel.com
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Pavan Kumar Linga <pavan.kumar.linga@intel.com>
Tested-by: Krishneil Singh <krishneil.k.singh@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Link: https://lore.kernel.org/r/20240131222241.2087516-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Matthieu Baerts says:
====================
mptcp: fixes for recent issues reported by CI's
This series of 9 patches fixes issues mostly identified by CI's not
managed by the MPTCP maintainers. Thank you Linero (LKFT) and Netdev
maintainers (NIPA) for running our kunit and selftests tests!
For the first patch, it took a bit of time to identify the root cause.
Some MPTCP Join selftest subtests have been "flaky", mostly in slow
environments. It appears to be due to the use of a TCP-specific helper
on an MPTCP socket. A fix for kernels >= v5.15.
Patches 2 to 4 add missing kernel config to support NetFilter tables
needed for IPTables commands. These kconfigs are usually enabled in
default configurations, but apparently not for all architectures.
Patches 2 and 3 can be backported up to v5.11 and the 4th one up to
v5.19.
Patch 5 increases the time limit for MPTCP selftests. It appears that
many CI's execute tests in a VM without acceleration supports, e.g. QEmu
without KVM. As a result, the tests take longer. Plus, there are more
and more tests. This patch modifies the timeout added in v5.18.
Patch 6 reduces the maximum rate and delay of the different links in
some Simult Flows selftest subtests. The goal is to let slow VMs reach
the maximum speed. The original rate was introduced in v5.11.
Patch 7 lets CI changing the prefix of the subtests titles, to be able
to run the same selftest multiple times with different parameters. With
different titles, tests will be considered as different and not override
previous results as it is the case with some CI envs. Subtests have been
introduced in v6.6.
Patch 8 and 9 make some MPTCP Join selftest subtests quicker by stopping
the transfer when the expected events have been seen. Patch 8 can be
backported up to v6.5.
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
====================
Link: https://lore.kernel.org/r/20240131-upstream-net-20240131-mptcp-ci-issues-v1-0-4c1c11e571ff@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Since the "Fixes" commits mentioned below, the newly added "userspace
pm" subtests of mptcp_join selftests are launching the whole transfer in
the background, do the required checks, then wait for the end of
transfer.
There is no need to wait longer, especially because the checks at the
end of the transfer are ignored (which is fine). This saves quite a few
seconds on slow environments.
While at it, use 'mptcp_lib_kill_wait()' helper everywhere, instead of
on a specific one with 'kill_tests_wait()'.
Fixes: b2e2248f365a ("selftests: mptcp: userspace pm create id 0 subflow")
Fixes: e3b47e460b4b ("selftests: mptcp: userspace pm remove initial subflow")
Fixes: b9fb176081fb ("selftests: mptcp: userspace pm send RM_ADDR for ID 0")
Cc: stable@vger.kernel.org
Reviewed-and-tested-by: Geliang Tang <geliang@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://lore.kernel.org/r/20240131-upstream-net-20240131-mptcp-ci-issues-v1-9-4c1c11e571ff@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Since the "Fixes" commit mentioned below, "userspace pm" subtests of
mptcp_join selftests introduced in v6.5 are launching the whole transfer
in the background, do the required checks, then wait for the end of
transfer.
There is no need to wait longer, especially because the checks at the
end of the transfer are ignored (which is fine). This saves quite a few
seconds in slow environments.
Note that old versions will need commit bdbef0a6ff10 ("selftests: mptcp:
add mptcp_lib_kill_wait") as well to get 'mptcp_lib_kill_wait()' helper.
Fixes: 4369c198e599 ("selftests: mptcp: test userspace pm out of transfer")
Cc: stable@vger.kernel.org # 6.5.x: bdbef0a6ff10: selftests: mptcp: add mptcp_lib_kill_wait
Cc: stable@vger.kernel.org # 6.5.x
Reviewed-and-tested-by: Geliang Tang <geliang@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://lore.kernel.org/r/20240131-upstream-net-20240131-mptcp-ci-issues-v1-8-4c1c11e571ff@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
If a CI executes the same selftest multiple times with different
options, all results from the same subtests will have the same title,
which confuse the CI. With the same title printed in TAP, the tests are
considered as the same ones.
Now, it is possible to override this prefix by using MPTCP_LIB_KSFT_TEST
env var, and have a different title.
While at it, use 'basename' to remove the suffix as well instead of
using an extra 'sed'.
Fixes: c4192967e62f ("selftests: mptcp: lib: format subtests results in TAP")
Cc: stable@vger.kernel.org
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://lore.kernel.org/r/20240131-upstream-net-20240131-mptcp-ci-issues-v1-7-4c1c11e571ff@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
When running the simult_flow selftest in slow environments -- e.g. QEmu
without KVM support --, the results can be unstable. This selftest
checks if the aggregated bandwidth is (almost) fully used as expected.
To help improving the stability while still keeping the same validation
in place, the BW and the delay are reduced to lower the pressure on the
CPU.
Fixes: 1a418cb8e888 ("mptcp: simult flow self-tests")
Fixes: 219d04992b68 ("mptcp: push pending frames when subflow has free space")
Cc: stable@vger.kernel.org
Suggested-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://lore.kernel.org/r/20240131-upstream-net-20240131-mptcp-ci-issues-v1-6-4c1c11e571ff@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
On very slow environments -- e.g. when QEmu is used without KVM --,
mptcp_join.sh selftest can take a bit more than 20 minutes. Bump the
default timeout by 50% as it seems normal to take that long on some
environments.
When a debug kernel config is used, this selftest will take even longer,
but that's certainly not a common test env to consider for the timeout.
The Fixes tag that has been picked here is there simply to help having
this patch backported to older stable versions. It is difficult to point
to the exact commit that made some env reaching the timeout from time to
time.
Fixes: d17b968b9876 ("selftests: mptcp: increase timeout to 20 minutes")
Cc: stable@vger.kernel.org
Acked-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://lore.kernel.org/r/20240131-upstream-net-20240131-mptcp-ci-issues-v1-5-4c1c11e571ff@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Since the commit mentioned below, 'mptcp_join' selftests is using
IPTables to add rules to the Mangle table, only in IPv4.
This KConfig is usually enabled by default in many defconfig, but we
recently noticed that some CI were running our selftests without them
enabled.
Fixes: b6e074e171bc ("selftests: mptcp: add infinite map testcase")
Cc: stable@vger.kernel.org
Reviewed-by: Geliang Tang <geliang@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://lore.kernel.org/r/20240131-upstream-net-20240131-mptcp-ci-issues-v1-4-4c1c11e571ff@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Since the commit mentioned below, 'mptcp_join' selftests is using
IPTables to add rules to the Filter table for IPv6.
It is then required to have IP6_NF_FILTER KConfig.
This KConfig is usually enabled by default in many defconfig, but we
recently noticed that some CI were running our selftests without them
enabled.
Fixes: 523514ed0a99 ("selftests: mptcp: add ADD_ADDR IPv6 test cases")
Cc: stable@vger.kernel.org
Reviewed-by: Geliang Tang <geliang@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://lore.kernel.org/r/20240131-upstream-net-20240131-mptcp-ci-issues-v1-3-4c1c11e571ff@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Since the commit mentioned below, 'mptcp_join' selftests is using
IPTables to add rules to the Filter table.
It is then required to have IP_NF_FILTER KConfig.
This KConfig is usually enabled by default in many defconfig, but we
recently noticed that some CI were running our selftests without them
enabled.
Fixes: 8d014eaa9254 ("selftests: mptcp: add ADD_ADDR timeout test case")
Cc: stable@vger.kernel.org
Reviewed-by: Geliang Tang <geliang@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
When the MPTCP PM detects that a subflow is stale, all the packet
scheduler must re-inject all the mptcp-level unacked data. To avoid
acquiring unneeded locks, it first try to check if any unacked data
is present at all in the RTX queue, but such check is currently
broken, as it uses TCP-specific helper on an MPTCP socket.
Funnily enough fuzzers and static checkers are happy, as the accessed
memory still belongs to the mptcp_sock struct, and even from a
functional perspective the recovery completed successfully, as
the short-cut test always failed.
A recent unrelated TCP change - commit d5fed5addb2b ("tcp: reorganize
tcp_sock fast path variables") - exposed the issue, as the tcp field
reorganization makes the mptcp code always skip the re-inection.
Fix the issue dropping the bogus call: we are on a slow path, the early
optimization proved once again to be evil.
Fixes: 1e1d9d6f119c ("mptcp: handle pending data on closed subflow")
Cc: stable@vger.kernel.org
Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/468
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://lore.kernel.org/r/20240131-upstream-net-20240131-mptcp-ci-issues-v1-1-4c1c11e571ff@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The directory link count in eventfs was somewhat bogus. It was only being
updated when a directory child was being looked up and not on creation.
One solution would be to update in get_attr() the link count by iterating
the ei->children list and then adding 2. But that could slow down simple
stat() calls, especially if it's done on all directories in eventfs.
Another solution would be to add a parent pointer to the eventfs_inode
and keep track of the number of sub directories it has on creation. But
this adds overhead for something not really worthwhile.
The solution decided upon is to keep all directory links in eventfs as 1.
This tells user space not to rely on the hard links of directories. Which
in this case it shouldn't.
Link: https://lore.kernel.org/linux-trace-kernel/20240201002719.GS2087318@ZenIV/
Link: https://lore.kernel.org/linux-trace-kernel/20240201161617.339968298@goodmis.org
Cc: stable@vger.kernel.org
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Al Viro <viro@ZenIV.linux.org.uk>
Cc: Ajay Kaher <ajay.kaher@broadcom.com>
Fixes: c1504e510238 ("eventfs: Implement eventfs dir creation functions")
Suggested-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
The dentries and inodes are created when referenced in the lookup code.
There's no reason to call fsnotify_*() functions when they are created by
a reference. It doesn't make any sense.
Link: https://lore.kernel.org/linux-trace-kernel/20240201002719.GS2087318@ZenIV/
Link: https://lore.kernel.org/linux-trace-kernel/20240201161617.166973329@goodmis.org
Cc: stable@vger.kernel.org
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Al Viro <viro@ZenIV.linux.org.uk>
Cc: Ajay Kaher <ajay.kaher@broadcom.com>
Fixes: a376007917776 ("eventfs: Implement functions to create files and dirs when accessed");
Suggested-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
Some of the eventfs_inode structure has holes in it. Rework the structure
to be a bit more condensed, and also remove the no longer used llist
field.
Link: https://lore.kernel.org/linux-trace-kernel/20240201161617.002321438@goodmis.org
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Al Viro <viro@ZenIV.linux.org.uk>
Cc: Ajay Kaher <ajay.kaher@broadcom.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
There should never be a case where an evenfs_inode is being freed without
is_freed being set. Add a WARN_ON_ONCE() if it ever happens. That would
mean there was one too many put_ei()s.
Link: https://lore.kernel.org/linux-trace-kernel/20240201161616.843551963@goodmis.org
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Al Viro <viro@ZenIV.linux.org.uk>
Cc: Ajay Kaher <ajay.kaher@broadcom.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
Currently, the timerlat's hrtimer is initialized at the first read of
timerlat_fd, and destroyed at close(). It works, but it causes an error
if the user program open() and close() the file without reading.
Here's an example:
# echo NO_OSNOISE_WORKLOAD > /sys/kernel/debug/tracing/osnoise/options
# echo timerlat > /sys/kernel/debug/tracing/current_tracer
# cat <<EOF > ./timerlat_load.py
# !/usr/bin/env python3
timerlat_fd = open("/sys/kernel/tracing/osnoise/per_cpu/cpu0/timerlat_fd", 'r')
timerlat_fd.close();
EOF
# ./taskset -c 0 ./timerlat_load.py
<BOOM>
BUG: kernel NULL pointer dereference, address: 0000000000000010
#PF: supervisor read access in kernel mode
#PF: error_code(0x0000) - not-present page
PGD 0 P4D 0
Oops: 0000 [#1] PREEMPT SMP NOPTI
CPU: 1 PID: 2673 Comm: python3 Not tainted 6.6.13-200.fc39.x86_64 #1
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-1.fc39 04/01/2014
RIP: 0010:hrtimer_active+0xd/0x50
Code: 2e 0f 1f 84 00 00 00 00 00 0f 1f 40 00 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 f3 0f 1e fa 0f 1f 44 00 00 48 8b 57 30 <8b> 42 10 a8 01 74 09 f3 90 8b 42 10 a8 01 75 f7 80 7f 38 00 75 1d
RSP: 0018:ffffb031009b7e10 EFLAGS: 00010286
RAX: 000000000002db00 RBX: ffff9118f786db08 RCX: 0000000000000000
RDX: 0000000000000000 RSI: ffff9117a0e64400 RDI: ffff9118f786db08
RBP: ffff9118f786db80 R08: ffff9117a0ddd420 R09: ffff9117804d4f70
R10: 0000000000000000 R11: 0000000000000000 R12: ffff9118f786db08
R13: ffff91178fdd5e20 R14: ffff9117840978c0 R15: 0000000000000000
FS: 00007f2ffbab1740(0000) GS:ffff9118f7840000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000000000010 CR3: 00000001b402e000 CR4: 0000000000750ee0
PKRU: 55555554
Call Trace:
<TASK>
? __die+0x23/0x70
? page_fault_oops+0x171/0x4e0
? srso_alias_return_thunk+0x5/0x7f
? avc_has_extended_perms+0x237/0x520
? exc_page_fault+0x7f/0x180
? asm_exc_page_fault+0x26/0x30
? hrtimer_active+0xd/0x50
hrtimer_cancel+0x15/0x40
timerlat_fd_release+0x48/0xe0
__fput+0xf5/0x290
__x64_sys_close+0x3d/0x80
do_syscall_64+0x60/0x90
? srso_alias_return_thunk+0x5/0x7f
? __x64_sys_ioctl+0x72/0xd0
? srso_alias_return_thunk+0x5/0x7f
? syscall_exit_to_user_mode+0x2b/0x40
? srso_alias_return_thunk+0x5/0x7f
? do_syscall_64+0x6c/0x90
? srso_alias_return_thunk+0x5/0x7f
? exit_to_user_mode_prepare+0x142/0x1f0
? srso_alias_return_thunk+0x5/0x7f
? syscall_exit_to_user_mode+0x2b/0x40
? srso_alias_return_thunk+0x5/0x7f
? do_syscall_64+0x6c/0x90
entry_SYSCALL_64_after_hwframe+0x6e/0xd8
RIP: 0033:0x7f2ffb321594
Code: 00 f7 d8 64 89 01 48 83 c8 ff c3 66 2e 0f 1f 84 00 00 00 00 00 90 f3 0f 1e fa 80 3d d5 cd 0d 00 00 74 13 b8 03 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 3c c3 0f 1f 00 55 48 89 e5 48 83 ec 10 89 7d
RSP: 002b:00007ffe8d8eef18 EFLAGS: 00000202 ORIG_RAX: 0000000000000003
RAX: ffffffffffffffda RBX: 00007f2ffba4e668 RCX: 00007f2ffb321594
RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000003
RBP: 00007ffe8d8eef40 R08: 0000000000000000 R09: 0000000000000000
R10: 55c926e3167eae79 R11: 0000000000000202 R12: 0000000000000003
R13: 00007ffe8d8ef030 R14: 0000000000000000 R15: 00007f2ffba4e668
</TASK>
CR2: 0000000000000010
---[ end trace 0000000000000000 ]---
Move hrtimer_init to timerlat_fd open() to avoid this problem.
Link: https://lore.kernel.org/linux-trace-kernel/7324dd3fc0035658c99b825204a66049389c56e3.1706798888.git.bristot@kernel.org
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: stable@vger.kernel.org
Fixes: e88ed227f639 ("tracing/timerlat: Add user-space interface")
Signed-off-by: Daniel Bristot de Oliveira <bristot@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
The rtnetlink tests require additional options currently
off by default.
Fixes: 2766a11161cc ("selftests: rtnetlink: add ipsec offload API test")
Fixes: 5e596ee171ba ("selftests: add xfrm state-policy-monitor to rtnetlink.sh")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Link: https://lore.kernel.org/r/9048ca58e49b962f35dba1dfb2beaf3dab3e0411.1706723341.git.pabeni@redhat.com/
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
