| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Pull block updates from Jens Axboe:
- drbd patches, bringing us closer to unifying the out-of-tree version
and the in tree one (Andreas, Christoph)
- support for auto-quiesce for the s390 dasd driver (Stefan)
- MD pull request via Song:
- md/bitmap: Optimal last page size (Jon Derrick)
- Various raid10 fixes (Yu Kuai, Li Nan)
- md: add error_handlers for raid0 and linear (Mariusz Tkaczyk)
- NVMe pull request via Christoph:
- Drop redundant pci_enable_pcie_error_reporting (Bjorn Helgaas)
- Validate nvmet module parameters (Chaitanya Kulkarni)
- Fence TCP socket on receive error (Chris Leech)
- Fix async event trace event (Keith Busch)
- Minor cleanups (Chaitanya Kulkarni, zhenwei pi)
- Fix and cleanup nvmet Identify handling (Damien Le Moal,
Christoph Hellwig)
- Fix double blk_mq_complete_request race in the timeout handler
(Lei Yin)
- Fix irq locking in nvme-fcloop (Ming Lei)
- Remove queue mapping helper for rdma devices (Sagi Grimberg)
- use structured request attribute checks for nbd (Jakub)
- fix blk-crypto race conditions between keyslot management (Eric)
- add sed-opal support for reading read locking range attributes
(Ondrej)
- make fault injection configurable for null_blk (Akinobu)
- clean up the request insertion API (Christoph)
- clean up the queue running API (Christoph)
- blkg config helper cleanups (Tejun)
- lazy init support for blk-iolatency (Tejun)
- various fixes and tweaks to ublk (Ming)
- remove hybrid polling. It hasn't really been useful since we got
async polled IO support, and these days we don't support sync polled
IO at all (Keith)
- misc fixes, cleanups, improvements (Zhong, Ondrej, Colin, Chengming,
Chaitanya, me)
* tag 'for-6.4/block-2023-04-21' of git://git.kernel.dk/linux: (118 commits)
nbd: fix incomplete validation of ioctl arg
ublk: don't return 0 in case of any failure
sed-opal: geometry feature reporting command
null_blk: Always check queue mode setting from configfs
block: ublk: switch to ioctl command encoding
blk-mq: fix the blk_mq_add_to_requeue_list call in blk_kick_flush
block, bfq: Fix division by zero error on zero wsum
fault-inject: fix build error when FAULT_INJECTION_CONFIGFS=y and CONFIGFS_FS=m
block: store bdev->bd_disk->fops->submit_bio state in bdev
block: re-arrange the struct block_device fields for better layout
md/raid5: remove unused working_disks variable
md/raid10: don't call bio_start_io_acct twice for bio which experienced read error
md/raid10: fix memleak of md thread
md/raid10: fix memleak for 'conf->bio_split'
md/raid10: fix leak of 'r10bio->remaining' for recovery
md/raid10: don't BUG_ON() in raise_barrier()
md: fix soft lockup in status_resync
md: add error_handlers for raid0 and linear
md: Use optimal I/O size for last bitmap page
md: Fix types in sb writer
...
|
|
io_uring provides the only way user space can poll completions, and that
always sets BLK_POLL_NOSLEEP. This effectively makes hybrid polling dead
code, so remove it and everything supporting it.
Hybrid polling was effectively killed off with 9650b453a3d4b1, "block:
ignore RWF_HIPRI hint for sync dio", but still potentially reachable
through io_uring until d729cf9acb93119, "io_uring: don't sleep when
polling for I/O", but hybrid polling probably should not have been
reachable through that async interface from the beginning.
Fixes: 9650b453a3d4 ("block: ignore RWF_HIPRI hint for sync dio")
Fixes: d729cf9acb93 ("io_uring: don't sleep when polling for I/O")
Signed-off-by: Keith Busch <kbusch@kernel.org>
Link: https://lore.kernel.org/r/20230320194926.3353144-1-kbusch@meta.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
The list of possible pm_profile values listed in sysfs-acpi-pmprofile
does not include the tablet one (8), so update it.
While at it, rewrite the description so it is more accurate and somewhat
easier to follow.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
/sys/block/<disk>/hidden is undocumented. Document it.
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Link: https://lore.kernel.org/r/20230303084323.228098-1-sagi@grimberg.me
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull MM updates from Andrew Morton:
- Daniel Verkamp has contributed a memfd series ("mm/memfd: add
F_SEAL_EXEC") which permits the setting of the memfd execute bit at
memfd creation time, with the option of sealing the state of the X
bit.
- Peter Xu adds a patch series ("mm/hugetlb: Make huge_pte_offset()
thread-safe for pmd unshare") which addresses a rare race condition
related to PMD unsharing.
- Several folioification patch serieses from Matthew Wilcox, Vishal
Moola, Sidhartha Kumar and Lorenzo Stoakes
- Johannes Weiner has a series ("mm: push down lock_page_memcg()")
which does perform some memcg maintenance and cleanup work.
- SeongJae Park has added DAMOS filtering to DAMON, with the series
"mm/damon/core: implement damos filter".
These filters provide users with finer-grained control over DAMOS's
actions. SeongJae has also done some DAMON cleanup work.
- Kairui Song adds a series ("Clean up and fixes for swap").
- Vernon Yang contributed the series "Clean up and refinement for maple
tree".
- Yu Zhao has contributed the "mm: multi-gen LRU: memcg LRU" series. It
adds to MGLRU an LRU of memcgs, to improve the scalability of global
reclaim.
- David Hildenbrand has added some userfaultfd cleanup work in the
series "mm: uffd-wp + change_protection() cleanups".
- Christoph Hellwig has removed the generic_writepages() library
function in the series "remove generic_writepages".
- Baolin Wang has performed some maintenance on the compaction code in
his series "Some small improvements for compaction".
- Sidhartha Kumar is doing some maintenance work on struct page in his
series "Get rid of tail page fields".
- David Hildenbrand contributed some cleanup, bugfixing and
generalization of pte management and of pte debugging in his series
"mm: support __HAVE_ARCH_PTE_SWP_EXCLUSIVE on all architectures with
swap PTEs".
- Mel Gorman and Neil Brown have removed the __GFP_ATOMIC allocation
flag in the series "Discard __GFP_ATOMIC".
- Sergey Senozhatsky has improved zsmalloc's memory utilization with
his series "zsmalloc: make zspage chain size configurable".
- Joey Gouly has added prctl() support for prohibiting the creation of
writeable+executable mappings.
The previous BPF-based approach had shortcomings. See "mm: In-kernel
support for memory-deny-write-execute (MDWE)".
- Waiman Long did some kmemleak cleanup and bugfixing in the series
"mm/kmemleak: Simplify kmemleak_cond_resched() & fix UAF".
- T.J. Alumbaugh has contributed some MGLRU cleanup work in his series
"mm: multi-gen LRU: improve".
- Jiaqi Yan has provided some enhancements to our memory error
statistics reporting, mainly by presenting the statistics on a
per-node basis. See the series "Introduce per NUMA node memory error
statistics".
- Mel Gorman has a second and hopefully final shot at fixing a CPU-hog
regression in compaction via his series "Fix excessive CPU usage
during compaction".
- Christoph Hellwig does some vmalloc maintenance work in the series
"cleanup vfree and vunmap".
- Christoph Hellwig has removed block_device_operations.rw_page() in
ths series "remove ->rw_page".
- We get some maple_tree improvements and cleanups in Liam Howlett's
series "VMA tree type safety and remove __vma_adjust()".
- Suren Baghdasaryan has done some work on the maintainability of our
vm_flags handling in the series "introduce vm_flags modifier
functions".
- Some pagemap cleanup and generalization work in Mike Rapoport's
series "mm, arch: add generic implementation of pfn_valid() for
FLATMEM" and "fixups for generic implementation of pfn_valid()"
- Baoquan He has done some work to make /proc/vmallocinfo and
/proc/kcore better represent the real state of things in his series
"mm/vmalloc.c: allow vread() to read out vm_map_ram areas".
- Jason Gunthorpe rationalized the GUP system's interface to the rest
of the kernel in the series "Simplify the external interface for
GUP".
- SeongJae Park wishes to migrate people from DAMON's debugfs interface
over to its sysfs interface. To support this, we'll temporarily be
printing warnings when people use the debugfs interface. See the
series "mm/damon: deprecate DAMON debugfs interface".
- Andrey Konovalov provided the accurately named "lib/stackdepot: fixes
and clean-ups" series.
- Huang Ying has provided a dramatic reduction in migration's TLB flush
IPI rates with the series "migrate_pages(): batch TLB flushing".
- Arnd Bergmann has some objtool fixups in "objtool warning fixes".
* tag 'mm-stable-2023-02-20-13-37' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (505 commits)
include/linux/migrate.h: remove unneeded externs
mm/memory_hotplug: cleanup return value handing in do_migrate_range()
mm/uffd: fix comment in handling pte markers
mm: change to return bool for isolate_movable_page()
mm: hugetlb: change to return bool for isolate_hugetlb()
mm: change to return bool for isolate_lru_page()
mm: change to return bool for folio_isolate_lru()
objtool: add UACCESS exceptions for __tsan_volatile_read/write
kmsan: disable ftrace in kmsan core code
kasan: mark addr_has_metadata __always_inline
mm: memcontrol: rename memcg_kmem_enabled()
sh: initialize max_mapnr
m68k/nommu: add missing definition of ARCH_PFN_OFFSET
mm: percpu: fix incorrect size in pcpu_obj_full_size()
maple_tree: reduce stack usage with gcc-9 and earlier
mm: page_alloc: call panic() when memoryless node allocation fails
mm: multi-gen LRU: avoid futile retries
migrate_pages: move THP/hugetlb migration support check to simplify code
migrate_pages: batch flushing TLB
migrate_pages: share more code between _unmap and _move
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86
Pull x86 platform driver updates from Hans de Goede:
- AMD PMC: Improvements to aid s2idle debugging
- Dell WMI-DDV: hwmon support
- INT3472 camera sensor power-management: Improve privacy LED support
- Intel VSEC: Base TPMI (Topology Aware Register and PM Capsule
Interface) support
- Mellanox: SN5600 and Nvidia L1 switch support
- Microsoft Surface Support: Various cleanups + code improvements
- tools/intel-speed-select: Various improvements
- Miscellaneous other cleanups / fixes
* tag 'platform-drivers-x86-v6.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86: (80 commits)
platform/x86: nvidia-wmi-ec-backlight: Add force module parameter
platform/x86/amd/pmf: Add depends on CONFIG_POWER_SUPPLY
platform/x86: dell-ddv: Prefer asynchronous probing
platform/x86: dell-ddv: Add hwmon support
Documentation/ABI: Add new attribute for mlxreg-io sysfs interfaces
platform: mellanox: mlx-platform: Move bus shift assignment out of the loop
platform: mellanox: mlx-platform: Add mux selection register to regmap
platform_data/mlxreg: Add field with mapped resource address
platform/mellanox: mlxreg-hotplug: Allow more flexible hotplug events configuration
platform: mellanox: Extend all systems with I2C notification callback
platform: mellanox: Split logic in init and exit flow
platform: mellanox: Split initialization procedure
platform: mellanox: Introduce support of new Nvidia L1 switch
platform: mellanox: Introduce support for next-generation 800GB/s switch
platform: mellanox: Cosmetic changes - rename to more common name
platform: mellanox: Change "reset_pwr_converter_fail" attribute
platform: mellanox: Introduce support for rack manager switch
MAINTAINERS: dell-wmi-sysman: drop Divya Bharathi
x86/platform/uv: Make kobj_type structure constant
platform/x86: think-lmi: Make kobj_type structure constant
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip
Pull xen updates from Juergen Gross:
- help deprecate the /proc/xen files by making the related information
available via sysfs
- mark the Xen variants of play_dead "noreturn"
- support a shared Xen platform interrupt
- several small cleanups and fixes
* tag 'for-linus-6.3-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
xen: sysfs: make kobj_type structure constant
x86/Xen: drop leftover VM-assist uses
xen: Replace one-element array with flexible-array member
xen/grant-dma-iommu: Implement a dummy probe_device() callback
xen/pvcalls-back: fix permanently masked event channel
xen: Allow platform PCI interrupt to be shared
x86/xen/time: prefer tsc as clocksource when it is invariant
x86/xen: mark xen_pv_play_dead() as __noreturn
x86/xen: don't let xen_pv_play_dead() return
drivers/xen/hypervisor: Expose Xen SIF flags to userspace
|
|
Add description for new attributes added for rack manager switch and
NG800 family systems.
Attributes related to power converter board:
- reset_pwr_converter_fail;
- pwr_converter_prog_en;
Attributes related to External Root of Trust (EROT) devices recovery:
- erot1_ap_reset;
- erot2_ap_reset;
- erot1_recovery;
- erot2_recovery;
- erot1_reset;
- erot2_reset;
- erot1_wp;
- erot2_wp;
- spi_chnl_select;
Attributes related to clock board failures and recovery:
- clk_brd1_boot_fail;
- clk_brd2_boot_fail;
- clk_brd_fail;
- clk_brd_prog_en;
Attributes related to power failures:
- reset_ac_ok_fail;
- asic_pg_fail;
Signed-off-by: Vadim Pasternak <vadimp@nvidia.com>
Reviewed-by: Michael Shych <michaelsh@nvidia.com>
Link: https://lore.kernel.org/r/20230208063331.15560-14-vadimp@nvidia.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
/proc/xen is a legacy pseudo filesystem which predates Xen support
getting merged into Linux. It has largely been replaced with more
normal locations for data (/sys/hypervisor/ for info, /dev/xen/ for
user devices). We want to compile xenfs support out of the dom0 kernel.
There is one item which only exists in /proc/xen, namely
/proc/xen/capabilities with "control_d" being the signal of "you're in
the control domain". This ultimately comes from the SIF flags provided
at VM start.
This patch exposes all SIF flags in /sys/hypervisor/start_flags/ as
boolean files, one for each bit, returning '1' if set, '0' otherwise.
Two known flags, 'privileged' and 'initdomain', are explicitly named,
and all remaining flags can be accessed via generically named files,
as suggested by Andrew Cooper.
Signed-off-by: Per Bilse <per.bilse@citrix.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Link: https://lore.kernel.org/r/20230103130213.2129753-1-per.bilse@citrix.com
Signed-off-by: Juergen Gross <jgross@suse.com>
|
|
Add documentation for memory_failure's per NUMA node sysfs entries
Link: https://lkml.kernel.org/r/20230120034622.2698268-4-jiaqiyan@google.com
Signed-off-by: Jiaqi Yan <jiaqiyan@google.com>
Acked-by: Naoya Horiguchi <naoya.horiguchi@nec.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Kefeng Wang <wangkefeng.wang@huawei.com>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Yang Shi <shy828301@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
The user can set the max_sectors limit to any valid value via sysfs
/sys/block/<dev>/queue/max_sectors_kb attribute. If the device limits
are ever rescanned, though, the limit reverts back to the potentially
artificially low BLK_DEF_MAX_SECTORS value.
Preserve the user's setting as the max_sectors limit as long as it's
valid. The user can reset back to defaults by writing 0 to the sysfs
file.
Signed-off-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Link: https://lore.kernel.org/r/20230105205146.3610282-3-kbusch@meta.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine
Pull dmaengine updates from Vinod Koul:
"New support:
- Qualcomm SDM670, SM6115 and SM6375 GPI controller support
- Ingenic JZ4755 dmaengine support
- Removal of iop-adma driver
Updates:
- Tegra support for dma-channel-mask
- at_hdmac cleanup and virt-chan support for this driver"
* tag 'dmaengine-6.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine: (46 commits)
dmaengine: Revert "dmaengine: remove s3c24xx driver"
dmaengine: tegra: Add support for dma-channel-mask
dt-bindings: dmaengine: Add dma-channel-mask to Tegra GPCDMA
dmaengine: idxd: Remove linux/msi.h include
dt-bindings: dmaengine: qcom: gpi: add compatible for SM6375
dmaengine: idxd: Fix crc_val field for completion record
dmaengine: at_hdmac: Convert driver to use virt-dma
dmaengine: at_hdmac: Remove unused member of at_dma_chan
dmaengine: at_hdmac: Rename "chan_common" to "dma_chan"
dmaengine: at_hdmac: Rename "dma_common" to "dma_device"
dmaengine: at_hdmac: Use bitfield access macros
dmaengine: at_hdmac: Keep register definitions and structures private to at_hdmac.c
dmaengine: at_hdmac: Set include entries in alphabetic order
dmaengine: at_hdmac: Use pm_ptr()
dmaengine: at_hdmac: Use devm_clk_get()
dmaengine: at_hdmac: Use devm_platform_ioremap_resource
dmaengine: at_hdmac: Use devm_kzalloc() and struct_size()
dmaengine: at_hdmac: Introduce atc_get_llis_residue()
dmaengine: at_hdmac: s/atc_get_bytes_left/atc_get_residue
dmaengine: at_hdmac: Pass residue by address to avoid unnecessary implicit casts
...
|
|
This patch includes an enhancement requested frequently on the mailing
list.[1][2] It adds a variable, cur_phonetic in the spk_vars, which can
be set as a module parameter, as well as in /sys/speakup/cur_phonetic.
This patch also documents cur_phonetic as a sysfs attribute in
sysfs-driver-speakup.
When cur_phonetic=1, it causes speakup to speak letters phonetically if
paused on the character while arrowing through a word.
When a user does not set cur_phonetic to any value, the default value
for it would be 0.
[1]: https://github.com/linux-speakup/speakup/issues/6
[2]: https://github.com/linux-speakup/speakup/issues/5
since V1:
- removed unnecessary lines
Signed-off-by: Mushahid Hussain<mushi.shar@gmail.com>
Reviewed-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Link: https://lore.kernel.org/r/20221115100530.91174-3-mushi.shar@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
In current code, the following sysfs attributes are exposed to user to
show or update the values:
max_read_buffers (max_tokens)
read_buffer_limit (token_limit)
group/read_buffers_allowed (group/tokens_allowed)
group/read_buffers_reserved (group/tokens_reserved)
group/use_read_buffer_limit (group/use_token_limit)
>From Intel IAA spec [1], Intel IAA does not support Read Buffer
allocation control. So these sysfs attributes should not be supported on
IAA device.
Fix this issue by making these sysfs attributes invisible through
is_visible() filter when the device is IAA.
Add description in the ABI documentation to mention that these
attributes are not visible when the device does not support Read Buffer
allocation control.
[1]: https://cdrdv2.intel.com/v1/dl/getContent/721858
Fixes: fde212e44f45 ("dmaengine: idxd: deprecate token sysfs attributes for read buffers")
Fixes: c52ca478233c ("dmaengine: idxd: add configuration component of driver")
Signed-off-by: Xiaochen Shen <xiaochen.shen@intel.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/20221022074949.11719-1-xiaochen.shen@intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
In current code, dev.max_batch_size and wq.max_batch_size attributes in
sysfs are exposed to user to show or update the values.
>From Intel IAA spec [1], Intel IAA does not support batch processing. So
these sysfs attributes should not be supported on IAA device.
Fix this issue by making the attributes of max_batch_size invisible in
sysfs through is_visible() filter when the device is IAA.
Add description in the ABI documentation to mention that the attributes
are not visible when the device does not support batch.
[1]: https://cdrdv2.intel.com/v1/dl/getContent/721858
Fixes: e7184b159dd3 ("dmaengine: idxd: add support for configurable max wq batch size")
Fixes: c52ca478233c ("dmaengine: idxd: add configuration component of driver")
Signed-off-by: Xiaochen Shen <xiaochen.shen@intel.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Reviewed-by: Fenghua Yu <fenghua.yu@intel.com>
Link: https://lore.kernel.org/r/20220930201528.18621-3-xiaochen.shen@intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Add sysfs knob to allow control of the number of batch descriptors that can
be concurrently processed by an engine in the group as a fraction of the
Maximum Work Descriptors in Progress value specfied in ENGCAP register.
This control knob is part of toggle for QoS control.
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Co-developed-by: Fenghua Yu <fenghua.yu@intel.com>
Signed-off-by: Fenghua Yu <fenghua.yu@intel.com>
Link: https://lore.kernel.org/r/20220917161222.2835172-6-fenghua.yu@intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Add sysfs knob to allow control of the number of work descriptors that can
be concurrently processed by an engine in the group as a fraction of the
Maximum Work Descriptors in Progress value specified in ENGCAP register.
This control knob is part of toggle for QoS control.
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Co-developed-by: Fenghua Yu <fenghua.yu@intel.com>
Signed-off-by: Fenghua Yu <fenghua.yu@intel.com>
Link: https://lore.kernel.org/r/20220917161222.2835172-5-fenghua.yu@intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
DSA 2.0 add the capability of configuring DMA ops on a per workqueue basis.
This means that certain ops can be disabled by the system administrator for
certain wq. By default, all ops are available. A bitmap is used to store
the ops due to total op size of 256 bits and it is more convenient to use a
range list to specify which bits are enabled.
One of the usage to support this is for VM migration between different
iteration of devices. The newer ops are disabled in order to allow guest to
migrate to a host that only support older ops. Another usage is to
restrict the WQ to certain operations for QoS of performance.
A sysfs of ops_config attribute is added per wq. It is only usable when the
ops_config bit is set under WQ_CAP register. This means that this attribute
will return -EOPNOTSUPP on DSA 1.x devices. The expected input is a range
list for the bits per operation the WQ supports.
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Co-developed-by: Fenghua Yu <fenghua.yu@intel.com>
Signed-off-by: Fenghua Yu <fenghua.yu@intel.com>
Link: https://lore.kernel.org/r/20220917161222.2835172-4-fenghua.yu@intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86
Pull x86 platform driver updates from Hans de Goede:
- Microsoft Surface:
- SSAM hot unplug support
- Surface Pro 8 keyboard cover support
- Tablet mode switch support for Surface Pro 8 and Surface Laptop
Studio
- thinkpad_acpi:
- AMD Automatice Mode Transitions (AMT) support
- Mellanox:
- Vulcan chassis COMe NVSwitch management support
- XH3000 support
- New generic/shared Intel P2SB (Primary to Sideband) support
- Lots of small cleanups
- Various small bugfixes
- Various new hardware ids / quirks additions
* tag 'platform-drivers-x86-v6.0-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86: (105 commits)
platform/x86/intel/vsec: Fix wrong type for local status variables
platform/x86: p2sb: Move out of X86_PLATFORM_DEVICES dependency
platform/x86: pmc_atom: Fix comment typo
platform/surface: gpe: Add support for 13" Intel version of Surface Laptop 4
platform/olpc: Fix uninitialized data in debugfs write
platform/mellanox: mlxreg-lc: Fix error flow and extend verbosity
platform/x86: pmc_atom: Match all Lex BayTrail boards with critclk_systems DMI table
platform/x86: sony-laptop: Remove useless comparisons in sony_pic_read_possible_resource()
tools/power/x86/intel-speed-select: Remove unneeded semicolon
tools/power/x86/intel-speed-select: Fix off by one check
platform/surface: tabletsw: Fix __le32 integer access
Documentation/ABI: Add new attributes for mlxreg-io sysfs interfaces
Documentation/ABI: mlxreg-io: Fix contact info
platform/mellanox: mlxreg-io: Add locking for io operations
platform/x86: mlx-platform: Add COME board revision register
platform/x86: mlx-platform: Add support for new system XH3000
platform/x86: mlx-platform: Introduce support for COMe NVSwitch management module for Vulcan chassis
platform/x86: mlx-platform: Add support for systems equipped with two ASICs
platform/x86: mlx-platform: Add cosmetic changes for alignment
platform/x86: mlx-platform: Make activation of some drivers conditional
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core / kernfs updates from Greg KH:
"Here is the set of driver core and kernfs changes for 6.0-rc1.
The "biggest" thing in here is some scalability improvements for
kernfs for large systems. Other than that, included in here are:
- arch topology and cache info changes that have been reviewed and
discussed a lot.
- potential error path cleanup fixes
- deferred driver probe cleanups
- firmware loader cleanups and tweaks
- documentation updates
- other small things
All of these have been in the linux-next tree for a while with no
reported problems"
* tag 'driver-core-6.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (63 commits)
docs: embargoed-hardware-issues: fix invalid AMD contact email
firmware_loader: Replace kmap() with kmap_local_page()
sysfs docs: ABI: Fix typo in comment
kobject: fix Kconfig.debug "its" grammar
kernfs: Fix typo 'the the' in comment
docs: driver-api: firmware: add driver firmware guidelines. (v3)
arch_topology: Fix cache attributes detection in the CPU hotplug path
ACPI: PPTT: Leave the table mapped for the runtime usage
cacheinfo: Use atomic allocation for percpu cache attributes
drivers/base: fix userspace break from using bin_attributes for cpumap and cpulist
MAINTAINERS: Change mentions of mpm to olivia
docs: ABI: sysfs-devices-soc: Update Lee Jones' email address
docs: ABI: sysfs-class-pwm: Update Lee Jones' email address
Documentation/process: Add embargoed HW contact for LLVM
Revert "kernfs: Change kernfs_notify_list to llist."
ACPI: Remove the unused find_acpi_cpu_cache_topology()
arch_topology: Warn that topology for nested clusters is not supported
arch_topology: Add support for parsing sockets in /cpu-map
arch_topology: Set cluster identifier in each core/thread from /cpu-map
arch_topology: Limit span of cpu_clustergroup_mask()
...
|
|
Fix typo in the comment
Signed-off-by: Slark Xiao <slark_xiao@163.com>
Link: https://lore.kernel.org/r/20220721020623.20974-1-slark_xiao@163.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Add documentation for the new attributes:
- "asic2_health" - health of 2-nd ASIC for system equipped with two ASICs.
- "asic_reset" and "asic2_reset" - ASICs reset control.
- "comm_chnl_ready" - communication channel indication to remote end (BMC).
- "config3" - indication of system minor BOM changes.
Signed-off-by: Vadim Pasternak <vadimp@nvidia.com>
Link: https://lore.kernel.org/r/20220711084559.62447-10-vadimp@nvidia.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
Fix e-mail in contact fields.
Signed-off-by: Vadim Pasternak <vadimp@nvidia.com>
Link: https://lore.kernel.org/r/20220711084559.62447-9-vadimp@nvidia.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
User space may want to know how to align their buffers to avoid
bouncing. Export the queue attribute.
Signed-off-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20220610195830.3574005-4-kbusch@fb.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char / misc / other smaller driver subsystem updates from Greg KH:
"Here is the large set of char, misc, and other driver subsystem
updates for 5.19-rc1. The merge request for this has been delayed as I
wanted to get lots of linux-next testing due to some late arrivals of
changes for the habannalabs driver.
Highlights of this merge are:
- habanalabs driver updates for new hardware types and fixes and
other updates
- IIO driver tree merge which includes loads of new IIO drivers and
cleanups and additions
- PHY driver tree merge with new drivers and small updates to
existing ones
- interconnect driver tree merge with fixes and updates
- soundwire driver tree merge with some small fixes
- coresight driver tree merge with small fixes and updates
- mhi bus driver tree merge with lots of updates and new device
support
- firmware driver updates
- fpga driver updates
- lkdtm driver updates (with a merge conflict, more on that below)
- extcon driver tree merge with small updates
- lots of other tiny driver updates and fixes and cleanups, full
details in the shortlog.
All of these have been in linux-next for almost 2 weeks with no
reported problems"
* tag 'char-misc-5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (387 commits)
habanalabs: use separate structure info for each error collect data
habanalabs: fix missing handle shift during mmap
habanalabs: remove hdev from hl_ctx_get args
habanalabs: do MMU prefetch as deferred work
habanalabs: order memory manager messages
habanalabs: return -EFAULT on copy_to_user error
habanalabs: use NULL for eventfd
habanalabs: update firmware header
habanalabs: add support for notification via eventfd
habanalabs: add topic to memory manager buffer
habanalabs: handle race in driver fini
habanalabs: add device memory scrub ability through debugfs
habanalabs: use unified memory manager for CB flow
habanalabs: unified memory manager new code for CB flow
habanalabs/gaudi: set arbitration timeout to a high value
habanalabs: add put by handle method to memory manager
habanalabs: hide memory manager page shift
habanalabs: Add separate poll interval value for protocol
habanalabs: use get_task_pid() to take PID
habanalabs: add prefetch flag to the MAP operation
...
|
|
Add documentation for the new attributes:
- "phy_reset" - Reset PHY.
- "mac_reset" - Reset MAC.
- "qsfp_pwr_good" - The power status of QSFP ports.
Signed-off-by: Michael Shych <michaelsh@nvidia.com>
Reviewed-by: Vadim Pasternak <vadimp@nvidia.com>
Link: https://lore.kernel.org/r/20220430115809.54565-4-michaelsh@nvidia.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
The MHI bus supports a standardized hardware reset, which is known as the
"SoC Reset". This reset is similar to the reset sysfs for PCI devices -
a hardware mechanism to reset the state back to square one.
The MHI SoC Reset is described in the spec as a reset of last resort. If
some unrecoverable error has occurred where other resets have failed, SoC
Reset is the "big hammer" that ungracefully resets the device. This is
effectivly the same as yanking the power on the device, and reapplying it.
However, depending on the nature of the particular issue, the underlying
transport link may remain active and configured. If the link remains up,
the device will flag a MHI system error early in the boot process after
the reset is executed, which allows the MHI bus to process a fatal error
event, and clean up appropiately.
While the SoC Reset is generally intended as a means of recovery when all
else has failed, it can be useful in non-error scenarios. For example,
if the device loads firmware from the host filesystem, the device may need
to be fully rebooted inorder to pick up the new firmware. In this
scenario, the system administrator may use the soc_reset sysfs to cause
the device to pick up the new firmware that the admin placed on the
filesystem.
Signed-off-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Reviewed-by: Bhaumik Bhatt <quic_bbhatt@quicinc.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/1650302327-30439-1-git-send-email-quic_jhugo@quicinc.com
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc and other driver updates from Greg KH:
"Here is the big set of char/misc and other small driver subsystem
updates for 5.18-rc1.
Included in here are merges from driver subsystems which contain:
- iio driver updates and new drivers
- fsi driver updates
- fpga driver updates
- habanalabs driver updates and support for new hardware
- soundwire driver updates and new drivers
- phy driver updates and new drivers
- coresight driver updates
- icc driver updates
Individual changes include:
- mei driver updates
- interconnect driver updates
- new PECI driver subsystem added
- vmci driver updates
- lots of tiny misc/char driver updates
All of these have been in linux-next for a while with no reported
problems"
* tag 'char-misc-5.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (556 commits)
firmware: google: Properly state IOMEM dependency
kgdbts: fix return value of __setup handler
firmware: sysfb: fix platform-device leak in error path
firmware: stratix10-svc: add missing callback parameter on RSU
arm64: dts: qcom: add non-secure domain property to fastrpc nodes
misc: fastrpc: Add dma handle implementation
misc: fastrpc: Add fdlist implementation
misc: fastrpc: Add helper function to get list and page
misc: fastrpc: Add support to secure memory map
dt-bindings: misc: add fastrpc domain vmid property
misc: fastrpc: check before loading process to the DSP
misc: fastrpc: add secure domain support
dt-bindings: misc: add property to support non-secure DSP
misc: fastrpc: Add support to get DSP capabilities
misc: fastrpc: add support for FASTRPC_IOCTL_MEM_MAP/UNMAP
misc: fastrpc: separate fastrpc device from channel context
dt-bindings: nvmem: brcm,nvram: add basic NVMEM cells
dt-bindings: nvmem: make "reg" property optional
nvmem: brcm_nvram: parse NVRAM content into NVMEM cells
nvmem: dt-bindings: Fix the error of dt-bindings check
...
|
|
Pull block updates from Jens Axboe:
- BFQ cleanups and fixes (Yu, Zhang, Yahu, Paolo)
- blk-rq-qos completion fix (Tejun)
- blk-cgroup merge fix (Tejun)
- Add offline error return value to distinguish it from an IO error on
the device (Song)
- IO stats fixes (Zhang, Christoph)
- blkcg refcount fixes (Ming, Yu)
- Fix for indefinite dispatch loop softlockup (Shin'ichiro)
- blk-mq hardware queue management improvements (Ming)
- sbitmap dead code removal (Ming, John)
- Plugging merge improvements (me)
- Show blk-crypto capabilities in sysfs (Eric)
- Multiple delayed queue run improvement (David)
- Block throttling fixes (Ming)
- Start deprecating auto module loading based on dev_t (Christoph)
- bio allocation improvements (Christoph, Chaitanya)
- Get rid of bio_devname (Christoph)
- bio clone improvements (Christoph)
- Block plugging improvements (Christoph)
- Get rid of genhd.h header (Christoph)
- Ensure drivers use appropriate flush helpers (Christoph)
- Refcounting improvements (Christoph)
- Queue initialization and teardown improvements (Ming, Christoph)
- Misc fixes/improvements (Barry, Chaitanya, Colin, Dan, Jiapeng,
Lukas, Nian, Yang, Eric, Chengming)
* tag 'for-5.18/block-2022-03-18' of git://git.kernel.dk/linux-block: (127 commits)
block: cancel all throttled bios in del_gendisk()
block: let blkcg_gq grab request queue's refcnt
block: avoid use-after-free on throttle data
block: limit request dispatch loop duration
block/bfq-iosched: Fix spelling mistake "tenative" -> "tentative"
sr: simplify the local variable initialization in sr_block_open()
block: don't merge across cgroup boundaries if blkcg is enabled
block: fix rq-qos breakage from skipping rq_qos_done_bio()
block: flush plug based on hardware and software queue order
block: ensure plug merging checks the correct queue at least once
block: move rq_qos_exit() into disk_release()
block: do more work in elevator_exit
block: move blk_exit_queue into disk_release
block: move q_usage_counter release into blk_queue_release
block: don't remove hctx debugfs dir from blk_mq_exit_queue
block: move blkcg initialization/destroy into disk allocation/release handler
sr: implement ->free_disk to simplify refcounting
sd: implement ->free_disk to simplify refcounting
sd: delay calling free_opal_dev
sd: call sd_zbc_release_disk before releasing the scsi_device reference
...
|
|
Add sysfs files that expose the inline encryption capabilities of
request queues:
/sys/block/$disk/queue/crypto/max_dun_bits
/sys/block/$disk/queue/crypto/modes/$mode
/sys/block/$disk/queue/crypto/num_keyslots
Userspace can use these new files to decide what encryption settings to
use, or whether to use inline encryption at all. This also brings the
crypto capabilities in line with the other queue properties, which are
already discoverable via the queue directory in sysfs.
Design notes:
- Place the new files in a new subdirectory "crypto" to group them
together and to avoid complicating the main "queue" directory. This
also makes it possible to replace "crypto" with a symlink later if
we ever make the blk_crypto_profiles into real kobjects (see below).
- It was necessary to define a new kobject that corresponds to the
crypto subdirectory. For now, this kobject just contains a pointer
to the blk_crypto_profile. Note that multiple queues (and hence
multiple such kobjects) may refer to the same blk_crypto_profile.
An alternative design would more closely match the current kernel
data structures: the blk_crypto_profile could be a kobject itself,
located directly under the host controller device's kobject, while
/sys/block/$disk/queue/crypto would be a symlink to it.
I decided not to do that for now because it would require a lot more
changes, such as no longer embedding blk_crypto_profile in other
structures, and also because I'm not sure we can rule out moving the
crypto capabilities into 'struct queue_limits' in the future. (Even
if multiple queues share the same crypto engine, maybe the supported
data unit sizes could differ due to other queue properties.) It
would also still be possible to switch to that design later without
breaking userspace, by replacing the directory with a symlink.
- Use "max_dun_bits" instead of "max_dun_bytes". Currently, the
kernel internally stores this value in bytes, but that's an
implementation detail. It probably makes more sense to talk about
this value in bits, and choosing bits is more future-proof.
- "modes" is a sub-subdirectory, since there may be multiple supported
crypto modes, sysfs is supposed to have one value per file, and it
makes sense to group all the mode files together.
- Each mode had to be named. The crypto API names like "xts(aes)" are
not appropriate because they don't specify the key size. Therefore,
I assigned new names. The exact names chosen are arbitrary, but
they happen to match the names used in log messages in fs/crypto/.
- The "num_keyslots" file is a bit different from the others in that
it is only useful to know for performance reasons. However, it's
included as it can still be useful. For example, a user might not
want to use inline encryption if there aren't very many keyslots.
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Eric Biggers <ebiggers@google.com>
Link: https://lore.kernel.org/r/20220124215938.2769-4-ebiggers@kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Add documentation for sysfs entries like feature_config_id and
feature_config_value for runtime feature configuration. The support is
added for an over temperature and external watchdog features.
Acked-by: Michal Simek <michal.simek@xilinx.com>
Signed-off-by: Ronak Jain <ronak.jain@xilinx.com>
Link: https://lore.kernel.org/r/20220209082709.32378-3-ronak.jain@xilinx.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
PPIN is the Protected Processor Identification Number.
This is used to identify the socket as a Field Replaceable Unit (FRU).
Existing code only displays this when reporting errors. But this makes
it inconvenient for large clusters to use it for its intended purpose
of inventory control.
Add ppin to /sys/devices/system/cpu/cpu*/topology to make what
is already available using RDMSR more easily accessible. Make
the file read only for root in case there are still people
concerned about making a unique system "serial number" available.
Signed-off-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/20220131230111.2004669-6-tony.luck@intel.com
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine
Pull dmaengine updates from Vinod Koul:
"A bunch of new support and few updates to drivers:
New support:
- DMA_MEMCPY_SG support is bought back as we have a user in Xilinx
driver
- Support for TI J721S2 SoC in k3-udma driver
- Support for Ingenic MDMA and BDMA in the JZ4760
- Support for Renesas r8a779f0 dmac
Updates:
- We are finally getting rid of slave_id, so this brings in the
changes across tree for that
- updates for idxd driver
- at_xdmac driver cleanup"
* tag 'dmaengine-5.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine: (60 commits)
dt-bindings: dma-controller: Split interrupt fields in example
dmaengine: pch_dma: Remove usage of the deprecated "pci-dma-compat.h" API
dmaengine: at_xdmac: Fix race over irq_status
dmaengine: at_xdmac: Remove a level of indentation in at_xdmac_tasklet()
dmaengine: at_xdmac: Fix at_xdmac_lld struct definition
dmaengine: at_xdmac: Fix lld view setting
dmaengine: at_xdmac: Remove a level of indentation in at_xdmac_advance_work()
dmaengine: at_xdmac: Fix concurrency over xfers_list
dmaengine: at_xdmac: Move the free desc to the tail of the desc list
dmaengine: at_xdmac: Fix race for the tx desc callback
dmaengine: at_xdmac: Fix concurrency over chan's completed_cookie
dmaengine: at_xdmac: Print debug message after realeasing the lock
dmaengine: at_xdmac: Start transfer for cyclic channels in issue_pending
dmaengine: at_xdmac: Don't start transactions at tx_submit level
dmaengine: idxd: deprecate token sysfs attributes for read buffers
dmaengine: idxd: change bandwidth token to read buffers
dmaengine: idxd: fix wq settings post wq disable
dmaengine: idxd: change MSIX allocation based on per wq activation
dmaengine: idxd: fix descriptor flushing locking
dmaengine: idxd: embed irq_entry in idxd_wq struct
...
|
|
Pull block updates from Jens Axboe:
- Unify where the struct request handling code is located in the blk-mq
code (Christoph)
- Header cleanups (Christoph)
- Clean up the io_context handling code (Christoph, me)
- Get rid of ->rq_disk in struct request (Christoph)
- Error handling fix for add_disk() (Christoph)
- request allocation cleanusp (Christoph)
- Documentation updates (Eric, Matthew)
- Remove trivial crypto unregister helper (Eric)
- Reduce shared tag overhead (John)
- Reduce poll_stats memory overhead (me)
- Known indirect function call for dio (me)
- Use atomic references for struct request (me)
- Support request list issue for block and NVMe (me)
- Improve queue dispatch pinning (Ming)
- Improve the direct list issue code (Keith)
- BFQ improvements (Jan)
- Direct completion helper and use it in mmc block (Sebastian)
- Use raw spinlock for the blktrace code (Wander)
- fsync error handling fix (Ye)
- Various fixes and cleanups (Lukas, Randy, Yang, Tetsuo, Ming, me)
* tag 'for-5.17/block-2022-01-11' of git://git.kernel.dk/linux-block: (132 commits)
MAINTAINERS: add entries for block layer documentation
docs: block: remove queue-sysfs.rst
docs: sysfs-block: document virt_boundary_mask
docs: sysfs-block: document stable_writes
docs: sysfs-block: fill in missing documentation from queue-sysfs.rst
docs: sysfs-block: add contact for nomerges
docs: sysfs-block: sort alphabetically
docs: sysfs-block: move to stable directory
block: don't protect submit_bio_checks by q_usage_counter
block: fix old-style declaration
nvme-pci: fix queue_rqs list splitting
block: introduce rq_list_move
block: introduce rq_list_for_each_safe macro
block: move rq_list macros to blk-mq.h
block: drop needless assignment in set_task_ioprio()
block: remove unnecessary trailing '\'
bio.h: fix kernel-doc warnings
block: check minor range in device_add_disk()
block: use "unsigned long" for blk_validate_block_size().
block: fix error unwinding in device_add_disk
...
|
|
/sys/block/<disk>/queue/virt_boundary_mask is completely undocumented.
Document it.
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Eric Biggers <ebiggers@google.com>
Link: https://lore.kernel.org/r/20211209003833.6396-7-ebiggers@kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
/sys/block/<disk>/queue/stable_writes is completely undocumented.
Document it.
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Eric Biggers <ebiggers@google.com>
Link: https://lore.kernel.org/r/20211209003833.6396-6-ebiggers@kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
sysfs documentation is supposed to go in Documentation/ABI/.
However, /sys/block/<disk>/queue/* are documented in
Documentation/block/queue-sysfs.rst, and sometimes redundantly in
Documentation/ABI/stable/sysfs-block too.
Let's consolidate this documentation into Documentation/ABI/.
Therefore, copy the relevant docs from queue-sysfs.rst into sysfs-block.
This primarily means adding the 25 missing files that were documented in
queue-sysfs.rst only, as well as mentioning the RO/RW status of files.
Documentation/ABI/ requires "Date" and "Contact" fields. For the Date
fields, I used the date of the commit which added support for each file.
For the "Contact" fields, I used linux-block.
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Eric Biggers <ebiggers@google.com>
Link: https://lore.kernel.org/r/20211209003833.6396-5-ebiggers@kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
The nomerges file was missing a "Contact" entry. Use linux-block.
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Eric Biggers <ebiggers@google.com>
Link: https://lore.kernel.org/r/20211209003833.6396-4-ebiggers@kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Sort the documentation for the files alphabetically by file path so that
there is a logical order and it's clear where to add new files.
With two small exceptions, this patch doesn't change the documentation
itself and just reorders it:
- In /sys/block/<disk>/<part>/stat, I replaced <part> with <partition>
to be consistent with the other files.
- The description for /sys/block/<disk>/<part>/stat referred to another
file "above", which I reworded.
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Eric Biggers <ebiggers@google.com>
Link: https://lore.kernel.org/r/20211209003833.6396-3-ebiggers@kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
The block layer sysfs ABI is widely used by userspace software and is
considered stable.
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Eric Biggers <ebiggers@google.com>
Link: https://lore.kernel.org/r/20211209003833.6396-2-ebiggers@kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
The following sysfs attributes will be obsolete due to the name change of
tokens to read buffers:
max_tokens
token_limit
group/tokens_allowed
group/tokens_reserved
group/use_token_limit
Create new entries and have old entry print warning of deprecation.
New attributes to replace the token ones:
max_read_buffers
read_buffer_limit
group/read_buffers_allowed
group/read_buffers_reserved
group/use_read_buffer_limit
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/163951339488.2988321.2424012059911316373.stgit@djiang5-desk3.ch.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Add a sysfs knob to allow tuning of retries for the kernel ENQCMDS
descriptor submission. While on host, it is not as likely that ENQCMDS
return busy during normal operations due to the driver controlling the
number of descriptors allocated for submission. However, when the driver is
operating as a guest driver, the chance of retry goes up significantly due
to sharing a wq with multiple VMs. A default value is provided with the
system admin being able to tune the value on a per WQ basis.
Suggested-by: Sanjay Kumar <sanjay.k.kumar@intel.com>
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/163820629464.2702134.7577370098568297574.stgit@djiang5-desk3.ch.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
== Problem ==
The amount of SGX memory on a system is determined by the BIOS and it
varies wildly between systems. It can be as small as dozens of MB's
and as large as many GB's on servers. Just like how applications need
to know how much regular RAM is available, enclave builders need to
know how much SGX memory an enclave can consume.
== Solution ==
Introduce a new sysfs file:
/sys/devices/system/node/nodeX/x86/sgx_total_bytes
to enumerate the amount of SGX memory available in each NUMA node.
This serves the same function for SGX as /proc/meminfo or
/sys/devices/system/node/nodeX/meminfo does for normal RAM.
'sgx_total_bytes' is needed today to help drive the SGX selftests.
SGX-specific swap code is exercised by creating overcommitted enclaves
which are larger than the physical SGX memory on the system. They
currently use a CPUID-based approach which can diverge from the actual
amount of SGX memory available. 'sgx_total_bytes' ensures that the
selftests can work efficiently and do not attempt stupid things like
creating a 100,000 MB enclave on a system with 128 MB of SGX memory.
== Implementation Details ==
Introduce CONFIG_HAVE_ARCH_NODE_DEV_GROUP opt-in flag to expose an
arch specific attribute group, and add an attribute for the amount of
SGX memory in bytes to each NUMA node:
== ABI Design Discussion ==
As opposed to the per-node ABI, a single, global ABI was considered.
However, this would prevent enclaves from being able to size
themselves so that they fit on a single NUMA node. Essentially, a
single value would rule out NUMA optimizations for enclaves.
Create a new "x86/" directory inside each "nodeX/" sysfs directory.
'sgx_total_bytes' is expected to be the first of at least a few
sgx-specific files to be placed in the new directory. Just scanning
/proc/meminfo, these are the no-brainers that we have for RAM, but we
need for SGX:
MemTotal: xxxx kB // sgx_total_bytes (implemented here)
MemFree: yyyy kB // sgx_free_bytes
SwapTotal: zzzz kB // sgx_swapped_bytes
So, at *least* three. I think we will eventually end up needing
something more along the lines of a dozen. A new directory (as
opposed to being in the nodeX/ "root") directory avoids cluttering the
root with several "sgx_*" files.
Place the new file in a new "nodeX/x86/" directory because SGX is
highly x86-specific. It is very unlikely that any other architecture
(or even non-Intel x86 vendor) will ever implement SGX. Using "sgx/"
as opposed to "x86/" was also considered. But, there is a real chance
this can get used for other arch-specific purposes.
[ dhansen: rewrite changelog ]
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/20211116162116.93081-2-jarkko@kernel.org
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core updates from Greg KH:
"Here is the big set of driver core changes for 5.16-rc1.
All of these have been in linux-next for a while now with no reported
problems.
Included in here are:
- big update and cleanup of the sysfs abi documentation files and
scripts from Mauro. We are almost at the place where we can
properly check that the running kernel's sysfs abi is documented
fully.
- firmware loader updates
- dyndbg updates
- kernfs cleanups and fixes from Christoph
- device property updates
- component fix
- other minor driver core cleanups and fixes"
* tag 'driver-core-5.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (122 commits)
device property: Drop redundant NULL checks
x86/build: Tuck away built-in firmware under FW_LOADER
vmlinux.lds.h: wrap built-in firmware support under FW_LOADER
firmware_loader: move struct builtin_fw to the only place used
x86/microcode: Use the firmware_loader built-in API
firmware_loader: remove old DECLARE_BUILTIN_FIRMWARE()
firmware_loader: formalize built-in firmware API
component: do not leave master devres group open after bind
dyndbg: refine verbosity 1-4 summary-detail
gpiolib: acpi: Replace custom code with device_match_acpi_handle()
i2c: acpi: Replace custom function with device_match_acpi_handle()
driver core: Provide device_match_acpi_handle() helper
dyndbg: fix spurious vNpr_info change
dyndbg: no vpr-info on empty queries
dyndbg: vpr-info on remove-module complete, not starting
device property: Add missed header in fwnode.h
Documentation: dyndbg: Improve cli param examples
dyndbg: Remove support for ddebug_query param
dyndbg: make dyndbg a known cli param
dyndbg: show module in vpr-info in dd-exec-queries
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86
Pull x86 platform driver updates from Hans de Goede:
"Highlights:
- AMD-PMC S0ix support fixes and improvements
- HP-WMI support for Omen laptops
- New nvidia-wmi-ec-backlight driver
- New Intel ISH ECLITE driver
- WMI core cleanups
- Support for various new Melanox platforms
- System76 Laptop support improvements
- Surface Laptop Studio support and initial Surface Pro 8 support
- Various other small fixes and hardware-id additions"
* tag 'platform-drivers-x86-v5.16-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86: (106 commits)
platform/x86: system76_acpi: Fix input device error handling
platform/x86: touchscreen_dmi: Add info for the Viglen Connect 10 tablet
platform/surface: aggregator_registry: Add initial support for Surface Pro 8
platform/x86: mlx-platform: Add support for new system SGN2410
platform/x86: mlx-platform: Add BIOS attributes for CoffeeLake COMEx based systems
platform/x86: mlx-platform: Extend FAN and LED configuration to support new MQM97xx systems
platform/x86: asus-wmi: rename platform_profile_* function symbols
platform/x86: hp-wmi: rename platform_profile_* function symbols
platform/x86: amd-pmc: Drop check for valid alarm time
platform/x86: amd-pmc: Downgrade dev_info message to dev_dbg
platform/x86: amd-pmc: fix compilation without CONFIG_RTC_SYSTOHC_DEVICE
platform/x86: system76_acpi: fix Kconfig dependencies
platform/x86: barco-p50-gpio: use KEY_VENDOR for button instead of KEY_RESTART
platform/x86: sony-laptop: replace snprintf in show functions with sysfs_emit
platform/x86: lg-laptop: replace snprintf in show functions with sysfs_emit
docs: ABI: fix documentation warning in sysfs-driver-mlxreg-io
platform/x86: wmi: change notification handler type
HID: surface-hid: Allow driver matching for target ID 1 devices
HID: surface-hid: Use correct event registry for managing HID events
platform/surface: aggregator_registry: Add support for Surface Laptop Studio
...
|
|
The use of a Sphinx list within this ABI file caused the following warning:
Documentation/ABI/stable/sysfs-driver-mlxreg-io:230: WARNING: Unexpected indentation.
Documentation/ABI/stable/sysfs-driver-mlxreg-io:230: WARNING: Block quote ends without a blank line; unexpected unindent.
Remove the bullets to make the warning go away and get proper formatting.
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
Add documentation for the new attributes for line cards:
- CPLDs versioning.
- Write protection control for 'nvram' devices.
- Line card reset reasons.
- Enabling burning of FPGA and CPLDs.
- Enabling burning of FPGA and gearbox SPI flashes,
- Enabling power of whole line card.
- Enabling power of QSFP ports equipped on line card.
- The maximum powered required for line card feeding.
- Line card configuration Id.
Signed-off-by: Vadim Pasternak <vadimp@nvidia.com>
Reviewed-by: Michael Shych <michaelsh@nvidia.com>
Link: https://lore.kernel.org/r/20211002093238.3771419-10-vadimp@nvidia.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
Add documentation for the new attributes:
- "bios_active_image"; "bios_auth_fail"; "bios_upgrade_fail";
"bios_safe_mode" to represent various BIOS statuses.
- "lc{n}_enable" - for put/release the line card to/from enable state.
- "lc{n}_pwr" - for power on/off the line card.
- "lc{n}_rst_mask" - for line card reset state enforced by ASIC, when
it sets it due to some abnormal ASIC behavior.
- "psu3_on"; "psu4_on" - for connection/disconnection power supply unit
to/from the power source.
- "pm_mgmt_en" - for setting power management control ownership. When
power management control is provided by hardware, it means that
hardware will automatically power off one or more line cards in case
system power budget is under power required for feeding all powered
on line cards. It could be a case, when some of power units lost
power good state.
- "shutdown_unlock" - for unlocking system after hardware or firmware
thermal shutdown, which causes locking of the all interfaces to ASIC.
Signed-off-by: Vadim Pasternak <vadimp@nvidia.com>
Reviewed-by: Michael Shych <michaelsh@nvidia.com>
Link: https://lore.kernel.org/r/20211002093238.3771419-9-vadimp@nvidia.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
Both ACPI and DT provide the ability to describe additional layers of
topology between that of individual cores and higher level constructs
such as the level at which the last level cache is shared.
In ACPI this can be represented in PPTT as a Processor Hierarchy
Node Structure [1] that is the parent of the CPU cores and in turn
has a parent Processor Hierarchy Nodes Structure representing
a higher level of topology.
For example Kunpeng 920 has 6 or 8 clusters in each NUMA node, and each
cluster has 4 cpus. All clusters share L3 cache data, but each cluster
has local L3 tag. On the other hand, each clusters will share some
internal system bus.
+-----------------------------------+ +---------+
| +------+ +------+ +--------------------------+ |
| | CPU0 | | cpu1 | | +-----------+ | |
| +------+ +------+ | | | | |
| +----+ L3 | | |
| +------+ +------+ cluster | | tag | | |
| | CPU2 | | CPU3 | | | | | |
| +------+ +------+ | +-----------+ | |
| | | |
+-----------------------------------+ | |
+-----------------------------------+ | |
| +------+ +------+ +--------------------------+ |
| | | | | | +-----------+ | |
| +------+ +------+ | | | | |
| | | L3 | | |
| +------+ +------+ +----+ tag | | |
| | | | | | | | | |
| +------+ +------+ | +-----------+ | |
| | | |
+-----------------------------------+ | L3 |
| data |
+-----------------------------------+ | |
| +------+ +------+ | +-----------+ | |
| | | | | | | | | |
| +------+ +------+ +----+ L3 | | |
| | | tag | | |
| +------+ +------+ | | | | |
| | | | | | +-----------+ | |
| +------+ +------+ +--------------------------+ |
+-----------------------------------| | |
+-----------------------------------| | |
| +------+ +------+ +--------------------------+ |
| | | | | | +-----------+ | |
| +------+ +------+ | | | | |
| +----+ L3 | | |
| +------+ +------+ | | tag | | |
| | | | | | | | | |
| +------+ +------+ | +-----------+ | |
| | | |
+-----------------------------------+ | |
+-----------------------------------+ | |
| +------+ +------+ +--------------------------+ |
| | | | | | +-----------+ | |
| +------+ +------+ | | | | |
| | | L3 | | |
| +------+ +------+ +---+ tag | | |
| | | | | | | | | |
| +------+ +------+ | +-----------+ | |
| | | |
+-----------------------------------+ | |
+-----------------------------------+ | |
| +------+ +------+ +--------------------------+ |
| | | | | | +-----------+ | |
| +------+ +------+ | | | | |
| | | L3 | | |
| +------+ +------+ +--+ tag | | |
| | | | | | | | | |
| +------+ +------+ | +-----------+ | |
| | +---------+
+-----------------------------------+
That means spreading tasks among clusters will bring more bandwidth
while packing tasks within one cluster will lead to smaller cache
synchronization latency. So both kernel and userspace will have
a chance to leverage this topology to deploy tasks accordingly to
achieve either smaller cache latency within one cluster or an even
distribution of load among clusters for higher throughput.
This patch exposes cluster topology to both kernel and userspace.
Libraried like hwloc will know cluster by cluster_cpus and related
sysfs attributes. PoC of HWLOC support at [2].
Note this patch only handle the ACPI case.
Special consideration is needed for SMT processors, where it is
necessary to move 2 levels up the hierarchy from the leaf nodes
(thus skipping the processor core level).
Note that arm64 / ACPI does not provide any means of identifying
a die level in the topology but that may be unrelate to the cluster
level.
[1] ACPI Specification 6.3 - section 5.2.29.1 processor hierarchy node
structure (Type 0)
[2] https://github.com/hisilicon/hwloc/tree/linux-cluster
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Tian Tao <tiantao6@hisilicon.com>
Signed-off-by: Barry Song <song.bao.hua@hisilicon.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20210924085104.44806-2-21cnbao@gmail.com
|
|
This was renamed to /sys/fs/o2cb. Mark the old name as
obsolete.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Link: https://lore.kernel.org/r/25210a6af51b65808e3f102f9f08c3f90b763801.1632750608.git.mchehab+huawei@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
