summaryrefslogtreecommitdiff
path: root/Documentation/arm
AgeCommit message (Collapse)AuthorFilesLines
2013-07-04Merge branch 'for-linus' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial Pull trivial tree updates from Jiri Kosina: "The usual stuff from trivial tree" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (34 commits) treewide: relase -> release Documentation/cgroups/memory.txt: fix stat file documentation sysctl/net.txt: delete reference to obsolete 2.4.x kernel spinlock_api_smp.h: fix preprocessor comments treewide: Fix typo in printk doc: device tree: clarify stuff in usage-model.txt. open firmware: "/aliasas" -> "/aliases" md: bcache: Fixed a typo with the word 'arithmetic' irq/generic-chip: fix a few kernel-doc entries frv: Convert use of typedef ctl_table to struct ctl_table sgi: xpc: Convert use of typedef ctl_table to struct ctl_table doc: clk: Fix incorrect wording Documentation/arm/IXP4xx fix a typo Documentation/networking/ieee802154 fix a typo Documentation/DocBook/media/v4l fix a typo Documentation/video4linux/si476x.txt fix a typo Documentation/virtual/kvm/api.txt fix a typo Documentation/early-userspace/README fix a typo Documentation/video4linux/soc-camera.txt fix a typo lguest: fix CONFIG_PAE -> CONFIG_x86_PAE in comment ...
2013-07-03Merge tag 'late-for-linus' of ↵Linus Torvalds3-0/+57
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC late changes from Arnd Bergmann: "These are changes that arrived a little late before the merge window or that have multiple dependencies on previous branches so they did not fit into one of the earlier ones. There are 10 branches merged here, a total of 39 non-merge commits. Contents are a mixed bag for the above reasons: * Two new SoC platforms: ST microelectronics stixxxx and the TI 'Nspire' graphing calculator. These should have been in the 'soc' branch but were a little late * Support for the Exynos 5420 variant in mach-exynos, which is based on the other exynos branches to avoid conflicts. * Various small changes for sh-mobile, ux500 and davinci * Common clk support for MSM" * tag 'late-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (39 commits) ARM: ux500: bail out on alien cpus ARM: davinci: da850: adopt to pinctrl-single change for configuring multiple pins serial: sh-sci: Initialise variables before access in sci_set_termios() ARM: stih41x: Add B2020 board support ARM: stih41x: Add B2000 board support ARM: sti: Add DEBUG_LL console support ARM: sti: Add STiH416 SOC support ARM: sti: Add STiH415 SOC support ARM: msm: Migrate to common clock framework ARM: msm: Make proc_comm clock control into a platform driver ARM: msm: Prepare clk_get() users in mach-msm for clock-pcom driver ARM: msm: Remove clock-7x30.h include file ARM: msm: Remove custom clk_set_{max,min}_rate() API ARM: msm: Remove custom clk_set_flags() API msm: iommu: Use clk_set_rate() instead of clk_set_min_rate() msm: iommu: Convert to clk_prepare/unprepare msm_sdcc: Convert to clk_prepare/unprepare usb: otg: msm: Convert to clk_prepare/unprepare msm_serial: Use devm_clk_get() and properly return errors msm_serial: Convert to clk_prepare/unprepare ...
2013-06-26ARM: sti: Add STiH416 SOC supportSrinivas Kandagatla1-0/+12
The STiH416 is advanced HD AVC processor with 3D graphics acceleration and 1.2-GHz ARM Cortex-A9 SMP CPU. Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@st.com> CC: Stephen Gallimore <stephen.gallimore@st.com> CC: Stuart Menefy <stuart.menefy@st.com> CC: Arnd Bergmann <arnd@arndb.de> CC: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@st.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2013-06-26ARM: sti: Add STiH415 SOC supportSrinivas Kandagatla2-0/+45
The STiH415 is the next generation of HD, AVC set-top box processors for satellite, cable, terrestrial and IP-STB markets. It is an ARM Cortex-A9 1.0 GHz, dual-core CPU. Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@st.com> CC: Stephen Gallimore <stephen.gallimore@st.com> CC: Stuart Menefy <stuart.menefy@st.com> CC: Arnd Bergmann <arnd@arndb.de> CC: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@st.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2013-06-16ARM: sunxi: Add Allwinner A10s machine compatibleMaxime Ripard1-0/+4
The A10s is a SoC member of the Allwinner sun5i family. It is basically an A13 with an EMAC and an HDMI controller. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2013-06-05Documentation/arm/IXP4xx fix a typoStefan Huber1-1/+1
Corrected the word softare to software. Signed-off-by: Stefan Huber <steffhip@googlemail.com> Acked-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2013-05-29ARM: sunxi: Update datasheet documentationMaxime Ripard1-8/+13
We have access to more documentation now, especially the user manuals, so add the links to them, and do so minor comestic changes while we're at it. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2013-05-04Merge tag 'firmware-for-linus' of ↵Linus Torvalds1-0/+88
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM platform specific firmware interfaces from Olof Johansson: "Two platforms, bcm and exynos have their own firmware interfaces using the "secure monitor call", this adds support for those. We had originally planned to have a third set of patches in here, which would extend support for the existing generic "psci" call that is used on multiple platforms as well as Xen and KVM guests, but that ended up getting dropped because the patches were not ready in time." * tag 'firmware-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: ARM: bcm: mark bcm_kona_smc_init as __init ARM: bcm281xx: Add DT support for SMC handler ARM: bcm281xx: Add L2 cache enable code ARM: EXYNOS: Add secure firmware support to secondary CPU bring-up ARM: EXYNOS: Add IO mapping for non-secure SYSRAM. ARM: EXYNOS: Add support for Exynos secure firmware ARM: EXYNOS: Add support for secure monitor calls ARM: Add interface for registering and calling firmware-specific operations
2013-05-03Merge branch 'for-linus' of git://git.linaro.org/people/rmk/linux-armLinus Torvalds2-0/+709
Pull ARM updates from Russell King: "The major items included in here are: - MCPM, multi-cluster power management, part of the infrastructure required for ARMs big.LITTLE support. - A rework of the ARM KVM code to allow re-use by ARM64. - Error handling cleanups of the IS_ERR_OR_NULL() madness and fixes of that stuff for arch/arm - Preparatory patches for Cortex-M3 support from Uwe Kleine-König. There is also a set of three patches in here from Hugh/Catalin to address freeing of inappropriate page tables on LPAE. You already have these from akpm, but they were already part of my tree at the time he sent them, so unfortunately they'll end up with duplicate commits" * 'for-linus' of git://git.linaro.org/people/rmk/linux-arm: (77 commits) ARM: EXYNOS: remove unnecessary use of IS_ERR_VALUE() ARM: IMX: remove unnecessary use of IS_ERR_VALUE() ARM: OMAP: use consistent error checking ARM: cleanup: OMAP hwmod error checking ARM: 7709/1: mcpm: Add explicit AFLAGS to support v6/v7 multiplatform kernels ARM: 7700/2: Make cpu_init() notrace ARM: 7702/1: Set the page table freeing ceiling to TASK_SIZE ARM: 7701/1: mm: Allow arch code to control the user page table ceiling ARM: 7703/1: Disable preemption in broadcast_tlb*_a15_erratum() ARM: mcpm: provide an interface to set the SMP ops at run time ARM: mcpm: generic SMP secondary bringup and hotplug support ARM: mcpm_head.S: vlock-based first man election ARM: mcpm: Add baremetal voting mutexes ARM: mcpm: introduce helpers for platform coherency exit/setup ARM: mcpm: introduce the CPU/cluster power API ARM: multi-cluster PM: secondary kernel entry code ARM: cacheflush: add synchronization helpers for mixed cache state accesses ARM: cpu hotplug: remove majority of cache flushing from platforms ARM: smp: flush L1 cache in cpu_die() ARM: tegra: remove tegra specific cpu_disable() ...
2013-04-24ARM: mcpm: Add baremetal voting mutexesDave Martin1-0/+211
This patch adds a simple low-level voting mutex implementation to be used to arbitrate during first man selection when no load/store exclusive instructions are usable. For want of a better name, these are called "vlocks". (I was tempted to call them ballot locks, but "block" is way too confusing an abbreviation...) There is no function to wait for the lock to be released, and no vlock_lock() function since we don't need these at the moment. These could straightforwardly be added if vlocks get used for other purposes. For architectural correctness even Strongly-Ordered memory accesses require barriers in order to guarantee that multiple CPUs have a coherent view of the ordering of memory accesses. Whether or not this matters depends on hardware implementation details of the memory system. Since the purpose of this code is to provide a clean, generic locking mechanism with no platform-specific dependencies the barriers should be present to avoid unpleasant surprises on future platforms. Note: * When taking the lock, we don't care about implicit background memory operations and other signalling which may be pending, because those are not part of the critical section anyway. A DMB is sufficient to ensure correctly observed ordering if the explicit memory accesses in vlock_trylock. * No barrier is required after checking the election result, because the result is determined by the store to VLOCK_OWNER_OFFSET and is already globally observed due to the barriers in voting_end. This means that global agreement on the winner is guaranteed, even before the winner is known locally. Signed-off-by: Dave Martin <dave.martin@linaro.org> Signed-off-by: Nicolas Pitre <nicolas.pitre@linaro.org> Reviewed-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Reviewed-by: Will Deacon <will.deacon@arm.com>
2013-04-24ARM: mcpm: introduce helpers for platform coherency exit/setupDave Martin1-0/+498
This provides helper methods to coordinate between CPUs coming down and CPUs going up, as well as documentation on the used algorithms, so that cluster teardown and setup operations are not done for a cluster simultaneously. For use in the power_down() implementation: * __mcpm_cpu_going_down(unsigned int cluster, unsigned int cpu) * __mcpm_outbound_enter_critical(unsigned int cluster) * __mcpm_outbound_leave_critical(unsigned int cluster) * __mcpm_cpu_down(unsigned int cluster, unsigned int cpu) The power_up_setup() helper should do platform-specific setup in preparation for turning the CPU on, such as invalidating local caches or entering coherency. It must be assembler for now, since it must run before the MMU can be switched on. It is passed the affinity level for which initialization should be performed. Because the mcpm_sync_struct content is looked-up and modified with the cache enabled or disabled depending on the code path, it is crucial to always ensure proper cache maintenance to update main memory right away. The sync_cache_*() helpers are used to that end. Also, in order to prevent a cached writer from interfering with an adjacent non-cached writer, we ensure each state variable is located to a separate cache line. Thanks to Nicolas Pitre and Achin Gupta for the help with this patch. Signed-off-by: Dave Martin <dave.martin@linaro.org> Signed-off-by: Nicolas Pitre <nico@linaro.org> Reviewed-by: Will Deacon <will.deacon@arm.com>
2013-04-08ARM: Add interface for registering and calling firmware-specific operationsTomasz Figa1-0/+88
Some boards are running with secure firmware running in TrustZone secure world, which changes the way some things have to be initialized. This patch adds an interface for platforms to specify available firmware operations and call them. A wrapper macro, call_firmware_op(), checks if the operation is provided and calls it if so, otherwise returns -ENOSYS to allow fallback to legacy operation.. By default no operations are provided. Example of use: In code using firmware ops: __raw_writel(virt_to_phys(exynos4_secondary_startup), CPU1_BOOT_REG); /* Call Exynos specific smc call */ if (call_firmware_op(cpu_boot, cpu) == -ENOSYS) cpu_boot_legacy(...); /* Try legacy way */ gic_raise_softirq(cpumask_of(cpu), 1); In board-/platform-specific code: static int platformX_do_idle(void) { /* tell platformX firmware to enter idle */ return 0; } static int platformX_cpu_boot(int i) { /* tell platformX firmware to boot CPU i */ return 0; } static const struct firmware_ops platformX_firmware_ops = { .do_idle = exynos_do_idle, .cpu_boot = exynos_cpu_boot, /* other operations not available on platformX */ }; static void __init board_init_early(void) { register_firmware_ops(&platformX_firmware_ops); } Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Tomasz Figa <t.figa@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2013-03-27arm: sunxi: Add useful information about sunxi clocksEmilio López1-0/+56
This patch contains useful bits of information about the sunxi clocks that may help and/or be interesting for current and future developers. Signed-off-by: Emilio López <emilio@elopez.com.ar> Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2012-12-16Merge tag 'fbdev-for-3.8' of git://gitorious.org/linux-omap-dss2/linuxLinus Torvalds1-6/+4
Pull fbdev changes from Tomi Valkeinen: "OMAPDSS changes, including: - use dynanic debug prints - OMAP platform dependency removals - Creation of compat-layer, helping us to improve omapdrm - Misc cleanups, aiming to make omadss more in line with the upcoming common display framework Exynos DP changes for the 3.8 merge window: - Device Tree support for Samsung Exynos DP - SW Link training is cleaned up. - HPD interrupt is supported. Samsung Framebuffer changes for the 3.8 merge window: - The bit definitions of header file are updated. - Some minor typos are fixed. - Some minor bugs of s3c_fb_check_var() are fixed. FB related changes for SH Mobile, Freescale DIU Add support for the Solomon SSD1307 OLED Controller" * tag 'fbdev-for-3.8' of git://gitorious.org/linux-omap-dss2/linux: (191 commits) OMAPDSS: fix TV-out issue with DSI PLL Revert "OMAPFB: simplify locking" OMAPFB: remove silly loop in fb2display() OMAPFB: fix error handling in omapfb_find_best_mode() OMAPFB: use devm_kzalloc to allocate omapfb2_device OMAPDSS: DISPC: remove dispc fck uses OMAPDSS: DISPC: get dss clock rate from dss driver drivers/video/console/softcursor.c: remove redundant NULL check before kfree() drivers/video: add support for the Solomon SSD1307 OLED Controller OMAPDSS: use omapdss_compat_init() in other drivers OMAPDSS: export dispc functions OMAPDSS: export dss_feat functions OMAPDSS: export dss_mgr_ops functions OMAPDSS: separate compat files in the Makefile OMAPDSS: move display sysfs init to compat layer OMAPDSS: DPI: use dispc's check_timings OMAPDSS: DISPC: add dispc_ovl_check() OMAPDSS: move irq handling to dispc-compat OMAPDSS: move omap_dispc_wait_for_irq_interruptible_timeout to dispc-compat.c OMAPDSS: move blocking mgr enable/disable to compat layer ... Conflicts: arch/arm/mach-davinci/devices-da8xx.c arch/arm/plat-omap/common.c drivers/media/platform/omap/omap_vout.c
2012-11-17ARM: sunxi: Add basic support for Allwinner A1x SoCsMaxime Ripard1-0/+19
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Acked-by: Stefan Roese <sr@denx.de>
2012-11-13OMAPFB: use dma_alloc_attrs to allocate memoryTomi Valkeinen1-6/+4
Use dma_alloc_attrs to allocate memory instead of omap specific vram allocator. After this we can remove the omap vram allocator. There are some downsides to this change: 1) dma_alloc_attrs doesn't let us allocate at certain physical address. However, this should not be a problem as this feature of vram allocator is only used when reserving the framebuffer that was initialized by the bootloader, and we don't currently support "passing" a framebuffer from the bootloader to the kernel anyway. 2) dma_alloc_attrs, as of now, always ioremaps the allocated area, and we don't need the ioremap when using VRFB. This patch uses DMA_ATTR_NO_KERNEL_MAPPING for the allocation, but the flag is currently not operational. 3) OMAPFB_GET_VRAM_INFO ioctl cannot return real values anymore. I changed the ioctl to return 64M for all the values, which, I hope, the applications will interpret as "there's enough vram". 4) "vram" kernel parameter to define how much ram to reserve for video use no longer works. The user needs to enable CMA and use "cma" parameter. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2012-10-11Merge branch 'fixes' into for-linusRussell King4-62/+263
Conflicts: arch/arm/kernel/smp.c
2012-10-02Merge tag 'docs' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-socLinus Torvalds1-0/+232
Pull ARM soc documentation updates from Olof Johansson: "Documentation update for Marvell SoCs, the secret decoder ring to all their crazy product names and numbers." * tag 'docs' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: arm: add documentation describing Marvell families of SoC
2012-09-21Merge branch 'samsung/cleanup' into next/cleanupOlof Johansson2-62/+28
From Kukjin Kim: Here, there are cleanup patches for Samsung v3.7 and most of them are related to cleanup Samsung specific gpio API. * samsung/cleanup: gpio: samsung: Update documentation ARM: S3C24XX: Use module_platform_driver macro in mach-osiris-dvs.c ARM: S3C24XX: Use module_platform_driver macro in h1940-bluetooth.c gpio-samsung: Remove now unused s3c2410_gpio* API ARM: S3C24XX: Remove obsolete GPIO API declarations ARM: S3C24XX: Convert users of s3c2410_gpio_setpin to gpiolib API ARM: EXYNOS: cleanup unused code related to GPS
2012-09-19ARM: virt: Update documentation for hyp mode entry supportDave Martin1-1/+21
Document the possibility of the kernel being entered in HYP mode. Signed-off-by: Dave Martin <dave.martin@linaro.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2012-09-07gpio: samsung: Update documentationSylwester Nawrocki2-62/+28
Update Samsung GPIO API documentation to reflect removal of the s3c24xx specific gpio API. While at it, fix some typos. The notes on conversion from s3c2410_* functions to the gpiolib API are left here just in case there is any out of tree code that still needs to be converted. Signed-off-by: Sylwester Nawrocki <sylvester.nawrocki@gmail.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2012-08-13Merge branch 'cleanup/io-pci' into next/cleanupsArnd Bergmann1-0/+3
From Rob Herring <robherring2@gmail.com>: This is the 2nd part of mach/io.h removals. This series removes io.h on platforms with PCI by creating a fixed virtual I/O mapping and a common __io() macro. This version has changed a bit to accommodate Tegra converting its PCIe host to a platform driver. Now the virtual space is only reserved during early boot before .map_io() is called. The mapping is not created until calling pci_ioremap_io which can be done at any point after vmalloc is initialized. I've gone back to fixed 64K windows for each PCI bus. This allows removing all the i/o resource setup from the individually platforms and placing it within the common ARM PCI code. I've only tested versatilepb under qemu (with the model hacked up to actually enable i/o space), so any testing is appreciated. iop3xx and mv78xx0 have some risk of breaking as the PCI bus addresses are moved to 0 from matching the cpu host bus addesss. * cleanup/io-pci: ARM: iop3xx: use fixed PCI i/o mapping ARM: mv78xx0: use fixed pci i/o mapping ARM: iop13xx: use fixed PCI i/o mapping iop13xx: use more regular PCI I/O space handling ARM: orion5x: use fixed PCI i/o mapping ARM: kirkwood: use fixed PCI i/o mapping ARM: dove: use fixed PCI i/o mapping ARM: footbridge: use fixed PCI i/o mapping ARM: shark: use fixed PCI i/o mapping ARM: integrator: remove trailing whitespace on pci_v3.c ARM: integrator: use fixed PCI i/o mapping ARM: tegra: use fixed PCI i/o mapping ARM: versatile: use fixed PCI i/o mapping ARM: move PCI i/o resource setup into common code ARM: Add fixed PCI i/o mapping i2c: iop3xx: use standard gpiolib functions i2c: iop3xx: clean-up trailing whitespace Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-08-11arm: add documentation describing Marvell families of SoCThomas Petazzoni1-0/+232
As stated in the introduction of the document, the families of ARM SoCs at Marvell are very complicated, and it is difficult for newcomers to understand the organization of this SoC family and how it relates to the Linux kernel support for those hardware platforms. This document is only at RFC stage for now, it requires reviews and comments from the Marvell maintainers, the PXA maintainers and the MMP maintainers. For correctness of course, but also to add any other information that would be useful. For example, one of the thing that wasn't clear how to detail in the documentation is how the SoCs relate to each other in terms of hardware IP blocks. For example, most of the Kirkwood/Dove/Armada 370-XP/etc. hardware IPs (I2C, SPI, USB, SATA, etc.) are identical, while the PXA and MMP families are completely separate. Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Cc: Andrew Lunn <andrew@lunn.ch> Cc: Jason Cooper <jason@lakedaemon.net> Cc: Gregory Clement <gregory.clement@free-electrons.com> Cc: Eric Miao <eric.y.miao@gmail.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Haojian Zhuang <haojian.zhuang@gmail.com> Cc: Nicolas Pitre <nico@fluxnic.net> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Olof Johansson <olof@lixom.net> Cc: Lior Amsalem <alior@marvell.com> Cc: Maen Suleiman <maen@marvell.com> Cc: Tawfik Bayouk <tawfik@marvell.com> Cc: Shadi Ammouri <shadi@marvell.com> Cc: Eran Ben-Avi <benavi@marvell.com> Acked-by: Arnd Bergmann <arnd@arndb.de> --- Changes from v3: * Add Arnd Bergmann Acked-by. Changes from v2: * Mention the plat-<foo> directory that each SoC family is using. * Take into account Eric Miao's comments on the PXA/MMP families: add PXA21x/PXA25x/PXA26x to the list, mention which processors are AP+CP or AP only. Clarify the comments on which SoCs were designed by Intel, which ones were designed by Marvell after the acquisition of the XScale family. * Mention long-term plans regarding the support of those SoC families. Changes from v1: * Added publicly available datasheet for the 88F5182 pointed by Andrew Lunn. * Added publicly available datasheet for the 88F5281 found with Google searches * Mentionned the Feroceon core name where appropriate, and Sheeva where appropriate * Fixed the core names for PXA930, PXA935 and PXA955 after comments from Arnd Bergmann. Wikipedia is mistakenly suggesting that PXA93x are Sheeva-based, and there isn't much information available on the web about the 955.
2012-07-25ARM: Add fixed PCI i/o mappingRob Herring1-0/+3
This adds a fixed virtual mapping for PCI i/o addresses. The mapping is located at the last 2MB of vmalloc region (0xfee00000-0xff000000). 2MB is used to align with PMD size, but IO_SPACE_LIMIT is 1MB. The space is reserved after .map_io and can be mapped at any time later with pci_ioremap_io. Platforms which need early i/o mapping (e.g. for vga console) can call pci_map_io_early in their .map_io function. This has changed completely from the 1st implementation which only supported creating the static mapping at .map_io. Signed-off-by: Rob Herring <rob.herring@calxeda.com> Cc: Russell King <linux@arm.linux.org.uk> Acked-by: Nicolas Pitre <nico@linaro.org>
2012-07-25Merge branch 'for-linus' of ↵Linus Torvalds2-2/+2
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial Pull trivial tree from Jiri Kosina: "Trivial updates all over the place as usual." * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (29 commits) Fix typo in include/linux/clk.h . pci: hotplug: Fix typo in pci iommu: Fix typo in iommu video: Fix typo in drivers/video Documentation: Add newline at end-of-file to files lacking one arm,unicore32: Remove obsolete "select MISC_DEVICES" module.c: spelling s/postition/position/g cpufreq: Fix typo in cpufreq driver trivial: typo in comment in mksysmap mach-omap2: Fix typo in debug message and comment scsi: aha152x: Fix sparse warning and make printing pointer address more portable. Change email address for Steve Glendinning Btrfs: fix typo in convert_extent_bit via: Remove bogus if check netprio_cgroup.c: fix comment typo backlight: fix memory leak on obscure error path Documentation: asus-laptop.txt references an obsolete Kconfig item Documentation: ManagementStyle: fixed typo mm/vmscan: cleanup comment error in balance_pgdat mm: cleanup on the comments of zone_reclaim_stat ...
2012-07-21Documentation: Add newline at end-of-file to files lacking oneJesper Juhl2-2/+2
This patch simply adds a newline character at end-of-file to those files in Documentation/ that currently lack one. This is done for a few different reasons: A) It's rather annoying when you do "cat some_file.txt" that your prompt/cursor ends up at the end of the last line of output rather than on a new line. B) Some tools that process files line-by-line may get confused by the lack of a newline on the last line. C) The "\ No newline at end of file" line in diffs annoys me for some reason. So, let's just add the missing newline once and for all. Signed-off-by: Jesper Juhl <jj@chaosbits.net> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2012-06-21Viresh has movedViresh Kumar1-1/+1
viresh.kumar@st.com email-id doesn't exist anymore as I have left the company. Replace ST's id with viresh.linux@gmail.com. It also updates .mailmap file to fix address for 'git shortlog' Signed-off-by: Viresh Kumar <viresh.linux@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-06-02Merge tag 'fbdev-updates-for-3.5' of git://github.com/schandinat/linux-2.6Linus Torvalds1-0/+46
Pull fbdev updates from Florian Tobias Schandinat: - driver for AUO-K1900 and AUO-K1901 epaper controller - large updates for OMAP (e.g. decouple HDMI audio and video) - some updates for Exynos and SH Mobile - various other small fixes and cleanups * tag 'fbdev-updates-for-3.5' of git://github.com/schandinat/linux-2.6: (130 commits) video: bfin_adv7393fb: Fix cleanup code video: exynos_dp: reduce delay time when configuring video setting video: exynos_dp: move sw reset prioir to enabling sw defined function video: exynos_dp: use devm_ functions fb: handle NULL pointers in framebuffer release OMAPDSS: HDMI: OMAP4: Update IRQ flags for the HPD IRQ request OMAPDSS: Apply VENC timings even if panel is disabled OMAPDSS: VENC/DISPC: Delay dividing Y resolution for managers connected to VENC OMAPDSS: DISPC: Support rotation through TILER OMAPDSS: VRFB: remove compiler warnings when CONFIG_BUG=n OMAPFB: remove compiler warnings when CONFIG_BUG=n OMAPDSS: remove compiler warnings when CONFIG_BUG=n OMAPDSS: DISPC: fix usage of dispc_ovl_set_accu_uv OMAPDSS: use DSI_FIFO_BUG workaround only for manual update displays OMAPDSS: DSI: Support command mode interleaving during video mode blanking periods OMAPDSS: DISPC: Update Accumulator configuration for chroma plane drivers/video: fsl-diu-fb: don't initialize the THRESHOLDS registers video: exynos mipi dsi: support reverse panel type video: exynos mipi dsi: Properly interpret the interrupt source flags video: exynos mipi dsi: Avoid races in probe() ...
2012-05-27Merge tag 'soc2' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-socLinus Torvalds1-15/+17
Pull arm-soc: soc specific changes (part 2) from Olof Johansson: "This adds support for the spear13xx platform, which has first been under review a long time ago and finally been completed after generic spear work has gone into the clock, dt and pinctrl branches. Also a number of updates for the samsung socs are part of this branch." Fix up trivial conflicts in drivers/gpio/gpio-samsung.c that look much worse than they are: the exonys5 init code was refactored in commit fd454997d687 ("gpio: samsung: refactor gpiolib init for exynos4/5"), and then commit f10590c9836c ("ARM: EXYNOS: add GPC4 bank instance") added a new gpio chip define and did tiny updates to the init code. So the conflict diff looks like hell, but it's actually a fairly simple change. * tag 'soc2' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (34 commits) ARM: exynos: fix building with CONFIG_OF disabled ARM: EXYNOS: Add AUXDATA for i2c controllers ARM: dts: Update device tree source files for EXYNOS5250 ARM: EXYNOS: Add device tree support for interrupt combiner ARM: EXYNOS: Add irq_domain support for interrupt combiner ARM: EXYNOS: Remove a new bus_type instance for EXYNOS5 ARM: EXYNOS: update irqs for EXYNOS5250 SoC ARM: EXYNOS: Add pre-divider and fout mux clocks for bpll and mpll ARM: EXYNOS: add GPC4 bank instance ARM: EXYNOS: Redefine IRQ_MCT_L0,1 definition ARM: EXYNOS: Modify the GIC physical address for static io-mapping ARM: EXYNOS: Add watchdog timer clock instance pinctrl: SPEAr1310: Fix pin numbers for clcd_high_res SPEAr: Update MAINTAINERS and Documentation SPEAr13xx: Add defconfig SPEAr13xx: Add compilation support SPEAr13xx: Add dts and dtsi files pinctrl: Add SPEAr13xx pinctrl drivers pinctrl: SPEAr: Create macro for declaring GPIO PINS SPEAr13xx: Add common clock framework support ...
2012-05-22Merge tag 'dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-socLinus Torvalds1-6/+7
Pull device tree conversions for arm-soc, part 1, from Olof Johansson: "The spear3xx, lpc32xx, shmobile and mmp platforms are joining the game of booting using device trees, which is a great step forward for them. at91 and spear have pretty much completed this process with a huge amount of work being put into at91. The other platforms are continuing the process. We finally start to see the payback on this investment, as new machines are getting supported purely by adding a .dts source file that can be completely independent of the kernel source." Fix up trivial conflict in arch/arm/Kconfig * tag 'dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (83 commits) ARM: at91: Add ADC driver to at91sam9260/at91sam9g20 dtsi files arm/dts: omap4-panda: Add LEDs support arm/dts: omap4-sdp: Add LEDs support arm/dts: twl4030: Add twl4030-gpio node OMAP4: devices: Do not create mcpdm device if the dtb has been provided OMAP4: devices: Do not create dmic device if the dtb has been provided Documentation: update docs for mmp dt ARM: dts: refresh dts file for arch mmp ARM: mmp: support pxa910 with device tree ARM: mmp: support mmp2 with device tree gpio: pxa: parse gpio from DTS file ARM: mmp: support DT in timer ARM: mmp: support DT in irq ARM: mmp: append CONFIG_MACH_MMP2_DT ARM: mmp: fix build issue on mmp with device tree ARM: ux500: Enable PRCMU Timer 4 (clocksource) for Device Tree ARM: ux500: Disable SMSC911x platform code registration when DT is enabled ARM: ux500: Fork cpu-db8500 platform_devs for sequential DT enablement ARM: ux500: Do not attempt to register non-existent i2c devices on Snowball ARM: SPEAr3xx: Correct keyboard data passed from DT ...
2012-05-14SPEAr: Update MAINTAINERS and DocumentationViresh Kumar1-15/+17
This patchset updates MAINTAINERS files, makes shiraz as second Maintainer for SPEAr SoCs. It also updates Documentation mostly for SPEAr13xx. Signed-off-by: Viresh Kumar <viresh.kumar@st.com>
2012-05-11OMAPDSS: Provide an interface for audio supportRicardo Neri1-0/+45
There exist several display technologies and standards that support audio as well. Hence, it is relevant to update the DSS device driver to provide an audio interface that may be used by an audio driver or any other driver interested in the functionality. The audio_enable function is intended to prepare the relevant IP for playback (e.g., enabling an audio FIFO, taking in/out of reset some IP, enabling companion chips, etc). It is intended to be called before audio_start. The audio_disable function performs the reverse operation and is intended to be called after audio_stop. While a given DSS device driver may support audio, it is possible that for certain configurations audio is not supported (e.g., an HDMI display using a VESA video timing). The audio_supported function is intended to query whether the current configuration of the display supports audio. The audio_config function is intended to configure all the relevant audio parameters of the display. In order to make the function independent of any specific DSS device driver, a struct omap_dss_audio is defined. Its purpose is to contain all the required parameters for audio configuration. At the moment, such structure contains pointers to IEC-60958 channel status word and CEA-861 audio infoframe structures. This should be enough to support HDMI and DisplayPort, as both are based on CEA-861 and IEC-60958. The omap_dss_audio structure may be extended in the future if required. The audio_enable/disable, audio_config and audio_supported functions could be implemented as functions that may sleep. Hence, they should not be called while holding a spinlock or a readlock. The audio_start/audio_stop function is intended to effectively start/stop audio playback after the configuration has taken place. These functions are designed to be used in an atomic context. Hence, audio_start should return quickly and be called only after all the needed resources for audio playback (audio FIFOs, DMA channels, companion chips, etc) have been enabled to begin data transfers. audio_stop is designed to only stop the audio transfers. The resources used for playback are released using audio_disable. A new enum omap_dss_audio_state is introduced to help the implementations of the interface to keep track of the audio state. The initial state is _DISABLED; then, the state transitions to _CONFIGURED, and then, when it is ready to play audio, to _ENABLED. The state _PLAYING is used when the audio is being rendered. Signed-off-by: Ricardo Neri <ricardo.neri@ti.com>
2012-05-11OMAPDSS: VENC: allow switching venc output type at runtimeGrazvydas Ignotas1-0/+1
VENC output type (composite/svideo) doesn't have to be fixed by board wiring, it is possible to also provide composite signal through svideo luminance connector (software enabled), which is what pandora does. Having to recompile the kernel for users who have TV connector types that don't match default board setting is very inconvenient, especially for users of a consumer device, so add support for switching VENC output type at runtime over a new sysfs file output_type. Signed-off-by: Grazvydas Ignotas <notasas@gmail.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2012-04-23ARM: SPEAr3xx: Add device-tree support to SPEAr3xx architectureViresh Kumar1-6/+7
This patch adds a generic target for SPEAr3xx machines that can be configured via the device-tree. Currently the following devices are supported via the devicetree: - VIC interrupts - PL011 UART - PL061 GPIO - PL110 CLCD - SP805 WDT - Synopsys DW I2C - Synopsys DW ethernet - ST FSMC-NAND - ST SPEAR-SMI - ST SPEAR-KEYBOARD - ST SPEAR-RTC - ARASAN SDHCI-SPEAR - SPEAR-EHCI - SPEAR-OHCI Other peripheral devices will follow in later patches. This also removes IO_ADDRESS macro and creates 16 MB static mappings instead of 4K for individual peripherals. This is done to have efficient TLB lookup for any I/O windows that are located closely together. ioremap() on this range will return this mapping only instead of creating another. Signed-off-by: Viresh Kumar <viresh.kumar@st.com>
2012-04-06ARM: remove ixp23xx and ixp2000 platformsRob Herring2-71/+0
ixp2xxx platforms have had no real changes since ~2006 and the maintainer has said on irc that they can be removed: 13:05 < nico> do you still care about ixp2000? 13:22 < lennert> not really, no 13:58 < nico> do you think we could remove it from the kernel tree? 14:01 < lennert> go for it, and remove ixp23xx too while you're at it Removing will help simplify ARM consolidation in general and PCI re-work specifically. Signed-off-by: Rob Herring <rob.herring@calxeda.com> Cc: Randy Dunlap <rdunlap@xenotime.net> Acked-by: Lennert Buytenhek <buytenh@wantstofly.org>
2012-03-07Documentation: Fix multiple typo in DocumentationMasanari Iida1-1/+1
Signed-off-by: Masanari Iida <standby24x7@gmail.com> Acked-by: Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-11-27ARM: move iotable mappings within the vmalloc regionNicolas Pitre1-6/+5
In order to remove the build time variation between different SOCs with regards to VMALLOC_END, the iotable mappings are now allocated inside the vmalloc region. This allows for VMALLOC_END to be identical across all machines. The value for VMALLOC_END is now set to 0xff000000 which is right where the consistent DMA area starts. To accommodate all static mappings on machines with possible highmem usage, the default vmalloc area size is changed to 240 MB so that VMALLOC_START is no higher than 0xf0000000 by default. Signed-off-by: Nicolas Pitre <nicolas.pitre@linaro.org> Tested-by: Stephen Warren <swarren@nvidia.com> Tested-by: Kevin Hilman <khilman@ti.com> Tested-by: Jamie Iles <jamie@jamieiles.com>
2011-07-25Merge branch 'next/deletion' of ↵Linus Torvalds1-2/+5
git+ssh://master.kernel.org/pub/scm/linux/kernel/git/arm/linux-arm-soc * 'next/deletion' of git+ssh://master.kernel.org/pub/scm/linux/kernel/git/arm/linux-arm-soc: ARM: mach-loki: delete ARM: mach-s3c2400: delete ARM: mach-s3c24a0: delete
2011-07-23Merge branch 'devel-stable' into for-nextRussell King1-0/+267
Conflicts: arch/arm/kernel/entry-armv.S
2011-07-19ARM: 6999/1: head, zImage: Always Enter the kernel in ARM stateDave Martin1-0/+5
Currently, the documented kernel entry requirements are not explicit about whether the kernel should be entered in ARM or Thumb, leading to an ambiguitity about how to enter Thumb-2 kernels. As a result, the kernel is reliant on the zImage decompressor to enter the kernel proper in the correct instruction set state. This patch changes the boot entry protocol for head.S and Image to be the same as for zImage: in all cases, the kernel is now entered in ARM. Documentation/arm/Booting is updated to reflect this new policy. A different rule will be needed for Cortex-M class CPUs as and when support for those lands in mainline, since these CPUs don't support the ARM instruction set at all: a note is added to the effect that the kernel must be entered in Thumb on such systems. Signed-off-by: Dave Martin <dave.martin@linaro.org> Acked-by: Nicolas Pitre <nicolas.pitre@linaro.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-07-18ARM: mach-s3c2400: deleteNicolas Pitre1-2/+5
On Tue, 28 Jun 2011, Ben Dooks wrote: > On Tue, Jun 28, 2011 at 11:22:57PM +0200, Arnd Bergmann wrote: > > > On a related note, what about mach-s3c2400? It seems to be even more > > incomplete. > > Probably the same fate awaits that. It is so old that there's little > incentive to do anything with it. So out it goes as well. The PORT_S3C2400 definition in include/linux/serial_core.h is left there to prevent a reuse of the same number for another port type. Signed-off-by: Nicolas Pitre <nicolas.pitre@linaro.org> Acked-by: Arnd Bergmann <arnd@arndb.de>
2011-06-29ARM: 6886/1: mmc, Add zboot from eSD support for SuperH Mobile ARMSimon Horman1-0/+42
This allows a ROM-able zImage to be written to eSD and for SuperH Mobile ARM to boot directly from the SDHI hardware block. This is achieved by the MaskROM loading the first portion of the image into MERAM and then jumping to it. This portion contains loader code which copies the entire image to SDRAM and jumps to it. From there the zImage boot code proceeds as normal, uncompressing the image into its final location and then jumping to it. Cc: Paul Mundt <lethal@linux-sh.org> Acked-by: Magnus Damm <magnus.damm@gmail.com> Acked-by: Paul Mundt <lethal@linux-sh.org> Signed-off-by: Simon Horman <horms@verge.net.au> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-06-28ARM: add a kuser_cmpxchg64 user space helperNicolas Pitre1-0/+64
Some user space applications are designed around the ability to perform atomic operations on 64 bit values. Since this is natively possible only with ARMv6k and above, let's provide a new kuser helper to perform the operation with kernel supervision on pre ARMv6k hardware. Signed-off-by: Nicolas Pitre <nicolas.pitre@linaro.org> Tested-by: Dave Martin <dave.martin@linaro.org>
2011-06-20ARM: kuser: move interface documentation out of the source codeNicolas Pitre1-0/+203
Digging into some assembly file in order to get information about the kuser helpers is not that convivial. Let's move that information to a better formatted file in Documentation/arm/ and improve on it a bit. Thanks to Dave Martin <dave.martin@linaro.org> for the initial cleanup and clarifications. Signed-off-by: Nicolas Pitre <nicolas.pitre@linaro.org> Acked-by: Dave Martin <dave.martin@linaro.org>
2011-05-26Merge branch 'for-rmk' of ↵Russell King1-2/+0
git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung into devel-stable Conflicts: arch/arm/Kconfig arch/arm/mach-exynos4/mach-nuri.c
2011-05-23dt: add documentation of ARM dt boot interfaceGrant Likely1-4/+29
v6: typo fixes v5: clarified that dtb should be aligned on a 64 bit boundary in RAM. v3: added details to Documentation/arm/Booting Acked-by: Tony Lindgren <tony@atomide.com> Acked-by: Nicolas Pitre <nicolas.pitre@linaro.org> Acked-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2011-05-12ARM: S5P6442: Removing ARCH_S5P6442Kukjin Kim1-2/+0
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2011-03-31Fix common misspellingsLucas De Marchi3-4/+4
Fixes generated by 'codespell' and manually reviewed. Signed-off-by: Lucas De Marchi <lucas.demarchi@profusion.mobi>
2011-03-17Merge branch 'remove' of master.kernel.org:/home/rmk/linux-2.6-armLinus Torvalds9-367/+0
* 'remove' of master.kernel.org:/home/rmk/linux-2.6-arm: ARM: 6629/2: aaec2000: remove support for mach-aaec2000 ARM: lh7a40x: remove unmaintained platform support Fix up trivial conflicts in - arch/arm/mach-{aaec2000,lh7a40x}/include/mach/memory.h (removed) - drivers/usb/gadget/Kconfig (USB_[GADGET_]LH7A40X removed, others added)
2011-01-25ARM: 6617/1: mmc, Add zboot from MMC support for SuperH Mobile ARMSimon Horman3-0/+206
This allows a ROM-able zImage to be written to MMC and for SuperH Mobile ARM to boot directly from the MMCIF hardware block. This is achieved by the MaskROM loading the first portion of the image into MERAM and then jumping to it. This portion contains loader code which copies the entire image to SDRAM and jumps to it. From there the zImage boot code proceeds as normal, uncompressing the image into its final location and then jumping to it. Cc: Magnus Damm <magnus.damm@gmail.com> Russell, please consider merging this for 2.6.38. This patch depends on: * "mmc, sh: Move MMCIF_PROGRESS_* into sh_mmcif.h" which will be merged though Paul Mundt's rmobile sh-2.6. The absence of this patch will break the build if the (new) CONFIG_ZBOOT_ROM_MMCIF option is set. There are no subtle side-effects. v2: Addressed comments by Magnus Damm * Fix copyright in vrl4.c * Fix use of #define CONFIG_ZBOOT_ROM_MMCIF in mmcif-sh7372.c * Initialise LED GPIO lines in head-ap4evb.txt instead of mmcif-sh7372.c as this is considered board-specific. v3: Addressed comments made in person by Magnus Damm * Move mmcif_loader to be earlier in the image and reduce the number of blocks of boot program loaded by the MaskRom from 40 to 8 accordingly. * Move LED GPIO initialisation into mmcif_progress_init - This leaves the partner jet script unbloated Other * inline mmcif_update_progress so it is a static inline in a header file v4: * Use htole16() and htole32() in v4rl.c to ensure that the output is little endian v5: Addressed comments by Russell King * Simplify assembly code * Jump to code rather than an address <- bug fix * Use (void __iomem *) as appropriate Roll in mackerel support * This was previously a separate patch, only because of the order in which this code was developed Signed-off-by: Simon Horman <horms@verge.net.au> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>