summaryrefslogtreecommitdiff
path: root/Documentation/blockdev
AgeCommit message (Collapse)AuthorFilesLines
2019-07-15docs: blockdev: add it to the admin-guideMauro Carvalho Chehab15-2609/+0
The blockdev book basically contains user-faced documentation. Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-07-15docs: block: convert to ReSTMauro Carvalho Chehab1-1/+1
Rename the block documentation files to ReST, add an index for them and adjust in order to produce a nice html output via the Sphinx build system. At its new index.rst, let's add a :orphan: while this is not linked to the main index.rst file, in order to avoid build warnings. Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-07-15docs: blockdev: convert to ReSTMauro Carvalho Chehab9-224/+377
Rename the blockdev documentation files to ReST, add an index for them and adjust in order to produce a nice html output via the Sphinx build system. The drbd sub-directory contains some graphs and data flows. Add those too to the documentation. At its new index.rst, let's add a :orphan: while this is not linked to the main index.rst file, in order to avoid build warnings. Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-01-09zram: idle writeback fixes and cleanupMinchan Kim1-27/+47
This patch includes some fixes and cleanup for idle-page writeback. 1. writeback_limit interface Now writeback_limit interface is rather conusing. For example, once writeback limit budget is exausted, admin can see 0 from /sys/block/zramX/writeback_limit which is same semantic with disable writeback_limit at this moment. IOW, admin cannot tell that zero came from disable writeback limit or exausted writeback limit. To make the interface clear, let's sepatate enable of writeback limit to another knob - /sys/block/zram0/writeback_limit_enable * before: while true : # to re-enable writeback limit once previous one is used up echo 0 > /sys/block/zram0/writeback_limit echo $((200<<20)) > /sys/block/zram0/writeback_limit .. .. # used up the writeback limit budget * new # To enable writeback limit, from the beginning, admin should # enable it. echo $((200<<20)) > /sys/block/zram0/writeback_limit echo 1 > /sys/block/zram/0/writeback_limit_enable while true : echo $((200<<20)) > /sys/block/zram0/writeback_limit .. .. # used up the writeback limit budget It's much strightforward. 2. fix condition check idle/huge writeback mode check The mode in writeback_store is not bit opeartion any more so no need to use bit operations. Furthermore, current condition check is broken in that it does writeback every pages regardless of huge/idle. 3. clean up idle_store No need to use goto. [minchan@kernel.org: missed spin_lock_init] Link: http://lkml.kernel.org/r/20190103001601.GA255139@google.com Link: http://lkml.kernel.org/r/20181224033529.19450-1-minchan@kernel.org Signed-off-by: Minchan Kim <minchan@kernel.org> Suggested-by: John Dias <joaodias@google.com> Cc: Sergey Senozhatsky <sergey.senozhatsky.work@gmail.com> Cc: John Dias <joaodias@google.com> Cc: Srinivas Paladugu <srnvs@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-12-28zram: writeback throttleMinchan Kim1-0/+31
If there are lots of write IO with flash device, it could have a wearout problem of storage. To overcome the problem, admin needs to design write limitation to guarantee flash health for entire product life. This patch creates a new knob "writeback_limit" for zram. writeback_limit's default value is 0 so that it doesn't limit any writeback. If admin want to measure writeback count in a certain period, he could know it via /sys/block/zram0/bd_stat's 3rd column. If admin want to limit writeback as per-day 400M, he could do it like below. MB_SHIFT=20 4K_SHIFT=12 echo $((400<<MB_SHIFT>>4K_SHIFT)) > \ /sys/block/zram0/writeback_limit. If admin want to allow further write again, he could do it like below echo 0 > /sys/block/zram0/writeback_limit If admin want to see remaining writeback budget, cat /sys/block/zram0/writeback_limit The writeback_limit count will reset whenever you reset zram (e.g., system reboot, echo 1 > /sys/block/zramX/reset) so keeping how many of writeback happened until you reset the zram to allocate extra writeback budget in next setting is user's job. [minchan@kernel.org: v4] Link: http://lkml.kernel.org/r/20181203024045.153534-8-minchan@kernel.org Link: http://lkml.kernel.org/r/20181127055429.251614-8-minchan@kernel.org Signed-off-by: Minchan Kim <minchan@kernel.org> Reviewed-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Cc: Joey Pabalinas <joeypabalinas@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-12-28zram: add bd_stat statisticsMinchan Kim1-0/+11
bd_stat represents things that happened in the backing device. Currently it supports bd_counts, bd_reads and bd_writes which are helpful to understand wearout of flash and memory saving. [minchan@kernel.org: v4] Link: http://lkml.kernel.org/r/20181203024045.153534-7-minchan@kernel.org Link: http://lkml.kernel.org/r/20181127055429.251614-7-minchan@kernel.org Signed-off-by: Minchan Kim <minchan@kernel.org> Reviewed-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Cc: Joey Pabalinas <joeypabalinas@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-12-28zram: support idle/huge page writebackMinchan Kim1-4/+24
Add a new feature "zram idle/huge page writeback". In the zram-swap use case, zram usually has many idle/huge swap pages. It's pointless to keep them in memory (ie, zram). To solve this problem, this feature introduces idle/huge page writeback to the backing device so the goal is to save more memory space on embedded systems. Normal sequence to use idle/huge page writeback feature is as follows, while (1) { # mark allocated zram slot to idle echo all > /sys/block/zram0/idle # leave system working for several hours # Unless there is no access for some blocks on zram, # they are still IDLE marked pages. echo "idle" > /sys/block/zram0/writeback or/and echo "huge" > /sys/block/zram0/writeback # write the IDLE or/and huge marked slot into backing device # and free the memory. } Per the discussion at https://lore.kernel.org/lkml/20181122065926.GG3441@jagdpanzerIV/T/#u, This patch removes direct incommpressibe page writeback feature (d2afd25114f4 ("zram: write incompressible pages to backing device")). Below concerns from Sergey: == &< == "IDLE writeback" is superior to "incompressible writeback". "incompressible writeback" is completely unpredictable and uncontrollable; it depens on data patterns and compression algorithms. While "IDLE writeback" is predictable. I even suspect, that, *ideally*, we can remove "incompressible writeback". "IDLE pages" is a super set which also includes "incompressible" pages. So, technically, we still can do "incompressible writeback" from "IDLE writeback" path; but a much more reasonable one, based on a page idling period. I understand that you want to keep "direct incompressible writeback" around. ZRAM is especially popular on devices which do suffer from flash wearout, so I can see "incompressible writeback" path becoming a dead code, long term. == &< == Below concerns from Minchan: == &< == My concern is if we enable CONFIG_ZRAM_WRITEBACK in this implementation, both hugepage/idlepage writeck will turn on. However someuser want to enable only idlepage writeback so we need to introduce turn on/off knob for hugepage or new CONFIG_ZRAM_IDLEPAGE_WRITEBACK for those usecase. I don't want to make it complicated *if possible*. Long term, I imagine we need to make VM aware of new swap hierarchy a little bit different with as-is. For example, first high priority swap can return -EIO or -ENOCOMP, swap try to fallback to next lower priority swap device. With that, hugepage writeback will work tranparently. So we could regard it as regression because incompressible pages doesn't go to backing storage automatically. Instead, user should do it via "echo huge" > /sys/block/zram/writeback" manually. == &< == Link: http://lkml.kernel.org/r/20181127055429.251614-6-minchan@kernel.org Signed-off-by: Minchan Kim <minchan@kernel.org> Reviewed-by: Joey Pabalinas <joeypabalinas@gmail.com> Reviewed-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-12-28zram: introduce ZRAM_IDLE flagMinchan Kim1-4/+6
To support idle page writeback with upcoming patches, this patch introduces a new ZRAM_IDLE flag. Userspace can mark zram slots as "idle" via "echo all > /sys/block/zramX/idle" which marks every allocated zram slot as ZRAM_IDLE. User could see it by /sys/kernel/debug/zram/zram0/block_state. 300 75.033841 ...i 301 63.806904 s..i 302 63.806919 ..hi Once there is IO for the slot, the mark will be disappeared. 300 75.033841 ... 301 63.806904 s..i 302 63.806919 ..hi Therefore, 300th block is idle zpage. With this feature, user can how many zram has idle pages which are waste of memory. Link: http://lkml.kernel.org/r/20181127055429.251614-5-minchan@kernel.org Signed-off-by: Minchan Kim <minchan@kernel.org> Reviewed-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Reviewed-by: Joey Pabalinas <joeypabalinas@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-10-24Merge tag 'docs-4.20' of git://git.lwn.net/linuxLinus Torvalds1-18/+0
Pull documentation updates from Jonathan Corbet: "This is a fairly typical cycle for documentation. There's some welcome readability improvements for the formatted output, some LICENSES updates including the addition of the ISC license, the removal of the unloved and unmaintained 00-INDEX files, the deprecated APIs document from Kees, more MM docs from Mike Rapoport, and the usual pile of typo fixes and corrections" * tag 'docs-4.20' of git://git.lwn.net/linux: (41 commits) docs: Fix typos in histogram.rst docs: Introduce deprecated APIs list kernel-doc: fix declaration type determination doc: fix a typo in adding-syscalls.rst docs/admin-guide: memory-hotplug: remove table of contents doc: printk-formats: Remove bogus kobject references for device nodes Documentation: preempt-locking: Use better example dm flakey: Document "error_writes" feature docs/completion.txt: Fix a couple of punctuation nits LICENSES: Add ISC license text LICENSES: Add note to CDDL-1.0 license that it should not be used docs/core-api: memory-hotplug: add some details about locking internals docs/core-api: rename memory-hotplug-notifier to memory-hotplug docs: improve readability for people with poorer eyesight yama: clarify ptrace_scope=2 in Yama documentation docs/vm: split memory hotplug notifier description to Documentation/core-api docs: move memory hotplug description into admin-guide/mm doc: Fix acronym "FEKEK" in ecryptfs docs: fix some broken documentation references iommu: Fix passthrough option documentation ...
2018-10-17drivers/block: Remove DAC960 driverHannes Reinecke1-756/+0
The DAC960 driver has been obsoleted by the myrb/myrs drivers, so it can be dropped. Signed-off-by: Hannes Reinecke <hare@suse.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-10-04block: Finish renaming REQ_DISCARD into REQ_OP_DISCARDBart Van Assche1-1/+1
Some time ago REQ_DISCARD was renamed into REQ_OP_DISCARD. Some comments and documentation files were not updated however. Update these comments and documentation files. See also commit 4e1b2d52a80d ("block, fs, drivers: remove REQ_OP compat defs and related code"). Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com> Cc: Mike Christie <mchristi@redhat.com> Cc: Martin K. Petersen <martin.petersen@oracle.com> Cc: Philipp Reisner <philipp.reisner@linbit.com> Cc: Lars Ellenberg <lars.ellenberg@linbit.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-09-10Drop all 00-INDEX files from Documentation/Henrik Austad1-18/+0
This is a respin with a wider audience (all that get_maintainer returned) and I know this spams a *lot* of people. Not sure what would be the correct way, so my apologies for ruining your inbox. The 00-INDEX files are supposed to give a summary of all files present in a directory, but these files are horribly out of date and their usefulness is brought into question. Often a simple "ls" would reveal the same information as the filenames are generally quite descriptive as a short introduction to what the file covers (it should not surprise anyone what Documentation/sched/sched-design-CFS.txt covers) A few years back it was mentioned that these files were no longer really needed, and they have since then grown further out of date, so perhaps it is time to just throw them out. A short status yields the following _outdated_ 00-INDEX files, first counter is files listed in 00-INDEX but missing in the directory, last is files present but not listed in 00-INDEX. List of outdated 00-INDEX: Documentation: (4/10) Documentation/sysctl: (0/1) Documentation/timers: (1/0) Documentation/blockdev: (3/1) Documentation/w1/slaves: (0/1) Documentation/locking: (0/1) Documentation/devicetree: (0/5) Documentation/power: (1/1) Documentation/powerpc: (0/5) Documentation/arm: (1/0) Documentation/x86: (0/9) Documentation/x86/x86_64: (1/1) Documentation/scsi: (4/4) Documentation/filesystems: (2/9) Documentation/filesystems/nfs: (0/2) Documentation/cgroup-v1: (0/2) Documentation/kbuild: (0/4) Documentation/spi: (1/0) Documentation/virtual/kvm: (1/0) Documentation/scheduler: (0/2) Documentation/fb: (0/1) Documentation/block: (0/1) Documentation/networking: (6/37) Documentation/vm: (1/3) Then there are 364 subdirectories in Documentation/ with several files that are missing 00-INDEX alltogether (and another 120 with a single file and no 00-INDEX). I don't really have an opinion to whether or not we /should/ have 00-INDEX, but the above 00-INDEX should either be removed or be kept up to date. If we should keep the files, I can try to keep them updated, but I rather not if we just want to delete them anyway. As a starting point, remove all index-files and references to 00-INDEX and see where the discussion is going. Signed-off-by: Henrik Austad <henrik@austad.us> Acked-by: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com> Just-do-it-by: Steven Rostedt <rostedt@goodmis.org> Reviewed-by: Jens Axboe <axboe@kernel.dk> Acked-by: Paul Moore <paul@paul-moore.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: Mark Brown <broonie@kernel.org> Acked-by: Mike Rapoport <rppt@linux.vnet.ibm.com> Cc: [Almost everybody else] Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2018-06-08zram: introduce zram memory trackingMinchan Kim1-0/+24
zRam as swap is useful for small memory device. However, swap means those pages on zram are mostly cold pages due to VM's LRU algorithm. Especially, once init data for application are touched for launching, they tend to be not accessed any more and finally swapped out. zRAM can store such cold pages as compressed form but it's pointless to keep in memory. Better idea is app developers free them directly rather than remaining them on heap. This patch tell us last access time of each block of zram via "cat /sys/kernel/debug/zram/zram0/block_state". The output is as follows, 300 75.033841 .wh 301 63.806904 s.. 302 63.806919 ..h First column is zram's block index and 3rh one represents symbol (s: same page w: written page to backing store h: huge page) of the block state. Second column represents usec time unit of the block was last accessed. So above example means the 300th block is accessed at 75.033851 second and it was huge so it was written to the backing store. Admin can leverage this information to catch cold|incompressible pages of process with *pagemap* once part of heaps are swapped out. I used the feature a few years ago to find memory hoggers in userspace to notify them what memory they have wasted without touch for a long time. With it, they could reduce unnecessary memory space. However, at that time, I hacked up zram for the feature but now I need the feature again so I decided it would be better to upstream rather than keeping it alone. I hope I submit the userspace tool to use the feature soon. [akpm@linux-foundation.org: fix i386 printk warning] [minchan@kernel.org: use ktime_get_boottime() instead of sched_clock()] Link: http://lkml.kernel.org/r/20180420063525.GA253739@rodete-desktop-imager.corp.google.com [akpm@linux-foundation.org: documentation tweak] [akpm@linux-foundation.org: fix i386 printk warning] [minchan@kernel.org: fix compile warning] Link: http://lkml.kernel.org/r/20180508104849.GA8209@rodete-desktop-imager.corp.google.com [rdunlap@infradead.org: fix printk formats] Link: http://lkml.kernel.org/r/3652ccb1-96ef-0b0b-05d1-f661d7733dcc@infradead.org Link: http://lkml.kernel.org/r/20180416090946.63057-5-minchan@kernel.org Signed-off-by: Minchan Kim <minchan@kernel.org> Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Reviewed-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-06-08zram: mark incompressible page as ZRAM_HUGEMinchan Kim1-0/+1
Mark incompressible pages so that we could investigate who is the owner of the incompressible pages once the page is swapped out via using upcoming zram memory tracker feature. With it, we could prevent such pages to be swapped out by using mlock. Otherwise we might remove them. This patch exposes new stat for huge pages via mm_stat. Link: http://lkml.kernel.org/r/20180416090946.63057-3-minchan@kernel.org Signed-off-by: Minchan Kim <minchan@kernel.org> Reviewed-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-09-08Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsiLinus Torvalds1-194/+0
Pull SCSI updates from James Bottomley: "This is mostly updates of the usual suspects: lpfc, qla2xxx, hisi_sas, megaraid_sas, zfcp and a host of minor updates. The major driver change here is the elimination of the block based cciss driver in favour of the SCSI based hpsa driver (which now drives all the legacy cases cciss used to be required for). Plus a reset handler clean up and the redo of the SAS SMP handler to use bsg lib" * tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (279 commits) scsi: scsi-mq: Always unprepare before requeuing a request scsi: Show .retries and .jiffies_at_alloc in debugfs scsi: Improve requeuing behavior scsi: Call scsi_initialize_rq() for filesystem requests scsi: qla2xxx: Reset the logo flag, after target re-login. scsi: qla2xxx: Fix slow mem alloc behind lock scsi: qla2xxx: Clear fc4f_nvme flag scsi: qla2xxx: add missing includes for qla_isr scsi: qla2xxx: Fix an integer overflow in sysfs code scsi: aacraid: report -ENOMEM to upper layer from aac_convert_sgraw2() scsi: aacraid: get rid of one level of indentation scsi: aacraid: fix indentation errors scsi: storvsc: fix memory leak on ring buffer busy scsi: scsi_transport_sas: switch to bsg-lib for SMP passthrough scsi: smartpqi: remove the smp_handler stub scsi: hpsa: remove the smp_handler stub scsi: bsg-lib: pass the release callback through bsg_setup_queue scsi: Rework handling of scsi_device.vpd_pg8[03] scsi: Rework the code for caching Vital Product Data (VPD) scsi: rcu: Introduce rcu_swap_protected() ...
2017-09-07zram: add config and doc file for writeback featureMinchan Kim1-0/+11
This patch adds document and kconfig for using of writeback feature. Link: http://lkml.kernel.org/r/1498459987-24562-10-git-send-email-minchan@kernel.org Signed-off-by: Minchan Kim <minchan@kernel.org> Cc: Juneho Choi <juno.choi@lge.com> Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-08-25scsi: cciss: Drop obsolete driverHannes Reinecke1-194/+0
The hpsa driver now has support for all boards the cciss driver used to support, so this patch removes the cciss driver and make hpsa an alias to cciss. Signed-off-by: Hannes Reinecke <hare@suse.com> Acked-by: Don Brace <don.brace@microsemi.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-04-14remove the mg_disk driverChristoph Hellwig1-84/+0
This drivers was added in 2008, but as far as a I can tell we never had a single platform that actually registered resources for the platform driver. It's also been unmaintained for a long time and apparently has a ATA mode that can be driven using the IDE/libata subsystem. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2017-02-28scripts/spelling.txt: add "followings" pattern and fix typo instancesMasahiro Yamada1-1/+1
Fix typos and add the following to the scripts/spelling.txt: followings||following While we are here, add a missing colon in the boilerplate in DT binding documents. The "you SoC" in allwinner,sunxi-pinctrl.txt was fixed as well. I reworded "as the followings:" to "as follows:" for drivers/usb/gadget/udc/renesas_usb3.c. Link: http://lkml.kernel.org/r/1481573103-11329-32-git-send-email-yamada.masahiro@socionext.com Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-02-25zram: extend zero pages to same element pageszhouxianrong1-3/+3
The idea is that without doing more calculations we extend zero pages to same element pages for zram. zero page is special case of same element page with zero element. 1. the test is done under android 7.0 2. startup too many applications circularly 3. sample the zero pages, same pages (none-zero element) and total pages in function page_zero_filled the result is listed as below: ZERO SAME TOTAL 36214 17842 598196 ZERO/TOTAL SAME/TOTAL (ZERO+SAME)/TOTAL ZERO/SAME AVERAGE 0.060631909 0.024990816 0.085622726 2.663825038 STDEV 0.00674612 0.005887625 0.009707034 2.115881328 MAX 0.069698422 0.030046087 0.094975336 7.56043956 MIN 0.03959586 0.007332205 0.056055193 1.928985507 from the above data, the benefit is about 2.5% and up to 3% of total swapout pages. The defect of the patch is that when we recovery a page from non-zero element the operations are low efficient for partial read. This patch extends zero_page to same_page so if there is any user to have monitored zero_pages, he will be surprised if the number is increased but it's not harmful, I believe. [minchan@kernel.org: do not free same element pages in zram_meta_free] Link: http://lkml.kernel.org/r/20170207065741.GA2567@bbox Link: http://lkml.kernel.org/r/1483692145-75357-1-git-send-email-zhouxianrong@huawei.com Link: http://lkml.kernel.org/r/1486307804-27903-1-git-send-email-minchan@kernel.org Signed-off-by: zhouxianrong <zhouxianrong@huawei.com> Signed-off-by: Minchan Kim <minchan@kernel.org> Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-02-23zram: remove obsolete sysfs attrsSergey Senozhatsky1-42/+32
We had a deprecated_attr_warn() warning for 2 years and now the time has come and we finally can do the cleanup. The plan was as follows: : per-stat sysfs attributes are considered to be deprecated. : The basic strategy is: : -- the existing RW nodes will be downgraded to WO nodes (in linux 4.11) : -- deprecated RO sysfs nodes will eventually be removed (in linux 4.11) : : The list of deprecated attributes can be found here: : Documentation/ABI/obsolete/sysfs-block-zram : : Basically, every attribute that has its own read accessible sysfs : node (e.g. num_reads) *AND* is accessible via one of the stat files : (zram<id>/stat or zram<id>/io_stat or zram<id>/mm_stat) is considered : to be deprecated. The patch also removes `obsolete/sysfs-block-zram', clean ups `testing/sysfs-block-zram' and tweaks zram.txt files. Link: http://lkml.kernel.org/r/20170118035838.11090-1-sergey.senozhatsky@gmail.com Signed-off-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Acked-by: Minchan Kim <minchan@kernel.org> Cc: Jonathan Corbet <corbet@lwn.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-10-24docs: fix locations of several documents that got movedMauro Carvalho Chehab1-1/+1
The previous patch renamed several files that are cross-referenced along the Kernel documentation. Adjust the links to point to the right places. Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2016-10-22Doc: cciss: Fix a typo in cciss.txtMasanari Iida1-1/+1
This patch fix a spelling typo in cciss.txt Signed-off-by: Masanari Iida <standby24x7@gmail.com> Acked-by: Don Brace <don.brace@microsemi.com> Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2016-07-27zram: cosmetic: cleanup documentationSergey Senozhatsky1-46/+45
zram documentation is a mix of different styles: spaces, tabs, tabs + spaces, etc. Clean it up. Link: http://lkml.kernel.org/r/20160531122017.2878-6-sergey.senozhatsky@gmail.com Signed-off-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Acked-by: Minchan Kim <minchan@kernel.org> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Jonathan Corbet <corbet@lwn.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-07-27zram: use crypto api to check alg availabilitySergey Senozhatsky1-0/+11
There is no way to get a string with all the crypto comp algorithms supported by the crypto comp engine, so we need to maintain our own backends list. At the same time we additionally need to use crypto_has_comp() to make sure that the user has requested a compression algorithm that is recognized by the crypto comp engine. Relying on /proc/crypto is not an options here, because it does not show not-yet-inserted compression modules. Example: modprobe zram cat /proc/crypto | grep -i lz4 modprobe lz4 cat /proc/crypto | grep -i lz4 name : lz4 driver : lz4-generic module : lz4 So the user can't tell exactly if the lz4 is really supported from /proc/crypto output, unless someone or something has loaded it. This patch also adds crypto_has_comp() to zcomp_available_show(). We store all the compression algorithms names in zcomp's `backends' array, regardless the CONFIG_CRYPTO_FOO configuration, but show only those that are also supported by crypto engine. This helps user to know the exact list of compression algorithms that can be used. Example: module lz4 is not loaded yet, but is supported by the crypto engine. /proc/crypto has no information on this module, while zram's `comp_algorithm' lists it: cat /proc/crypto | grep -i lz4 cat /sys/block/zram0/comp_algorithm [lzo] lz4 deflate lz4hc 842 We still use the `backends' array to determine if the requested compression backend is known to crypto api. This array, however, may not contain some entries, therefore as the last step we call crypto_has_comp() function which attempts to insmod the requested compression algorithm to determine if crypto api supports it. The advantage of this method is that now we permit the usage of out-of-tree crypto compression modules (implementing S/W or H/W compression). [sergey.senozhatsky@gmail.com: zram-use-crypto-api-to-check-alg-availability-v3] Link: http://lkml.kernel.org/r/20160604024902.11778-4-sergey.senozhatsky@gmail.com Link: http://lkml.kernel.org/r/20160531122017.2878-5-sergey.senozhatsky@gmail.com Signed-off-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Acked-by: Minchan Kim <minchan@kernel.org> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Signed-off-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-05-21zram: introduce per-device debug_stat sysfs nodeSergey Senozhatsky1-0/+1
debug_stat sysfs is read-only and represents various debugging data that zram developers may need. This file is not meant to be used by anyone else: its content is not documented and will change any time w/o any notice. Therefore, the output of debug_stat file contains a version string. To avoid any confusion, we will increase the version number every time we modify the output. At the moment this file exports only one value -- the number of re-compressions, IOW, the number of times compression fast path has failed. This stat is temporary any will be useful in case if any per-cpu compression streams regressions will be reported. Link: http://lkml.kernel.org/r/20160513230834.GB26763@bbox Link: http://lkml.kernel.org/r/20160511134553.12655-1-sergey.senozhatsky@gmail.com Signed-off-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Signed-off-by: Minchan Kim <minchan@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-05-21zram: remove max_comp_streams internalsSergey Senozhatsky1-19/+8
Remove the internal part of max_comp_streams interface, since we switched to per-cpu streams. We will keep RW max_comp_streams attr around, because: a) we may (silently) switch back to idle compression streams list and don't want to disturb user space b) max_comp_streams attr must wait for the next 'lay off cycle'; we give user space 2 years to adjust before we remove/downgrade the attr, and there are already several attrs scheduled for removal in 4.11, so it's too late for max_comp_streams. This slightly change a user visible behaviour: - First, reading from max_comp_stream file now will always return the number of online CPUs. - Second, writing to max_comp_stream will not take any effect. Link: http://lkml.kernel.org/r/20160503165546.25201-1-sergey.senozhatsky@gmail.com Signed-off-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Cc: Minchan Kim <minchan@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-03-14cpqarray: remove it from the kernelJens Axboe1-93/+0
We disabled the ability to enable this driver back in October of 2013, we should be able to safely remove it at this point. The initial goal was to remove it in 3.15, so now is the time. Signed-off-by: Jens Axboe <axboe@fb.com>
2015-09-25zram: update documentationSergey SENOZHATSKY1-4/+40
Several documentation changes. First, we never mentioned any errors and never required any error checks in documentation. Second, mention that there is another way to configure and manage zram devices -- zramctl, provided by util-linux. Third, add a bit of clarification on why `mem_used_max' attr is RW and correct some typos. Signed-off-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2015-09-09zsmalloc: account the number of compacted pagesSergey Senozhatsky1-1/+2
Compaction returns back to zram the number of migrated objects, which is quite uninformative -- we have objects of different sizes so user space cannot obtain any valuable data from that number. Change compaction to operate in terms of pages and return back to compaction issuer the number of pages that were freed during compaction. So from now on we will export more meaningful value in zram<id>/mm_stat -- the number of freed (compacted) pages. This requires: (a) a rename of `num_migrated' to 'pages_compacted' (b) a internal API change -- return first_page's fullness_group from putback_zspage(), so we know when putback_zspage() did free_zspage(). It helps us to account compaction stats correctly. Signed-off-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Acked-by: Minchan Kim <minchan@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-06-26zram: add dynamic device add/remove functionalitySergey Senozhatsky1-3/+20
We currently don't support on-demand device creation. The one and only way to have N zram devices is to specify num_devices module parameter (default value: 1). IOW if, for some reason, at some point, user wants to have N + 1 devies he/she must umount all the existing devices, unload the module, load the module passing num_devices equals to N + 1. And do this again, if needed. This patch introduces zram control sysfs class, which has two sysfs attrs: - hot_add -- add a new zram device - hot_remove -- remove a specific (device_id) zram device hot_add sysfs attr is read-only and has only automatic device id assignment mode (as requested by Minchan Kim). read operation performed on this attr creates a new zram device and returns back its device_id or error status. Usage example: # add a new specific zram device cat /sys/class/zram-control/hot_add 2 # remove a specific zram device echo 4 > /sys/class/zram-control/hot_remove Returning zram_add() error code back to user (-ENOMEM in this case) cat /sys/class/zram-control/hot_add cat: /sys/class/zram-control/hot_add: Cannot allocate memory NOTE, there might be users who already depend on the fact that at least zram0 device gets always created by zram_init(). Preserve this behavior. [minchan@kernel.org: use zram->claim to avoid lockdep splat] Signed-off-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Cc: Minchan Kim <minchan@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-06-26zram: remove max_num_devices limitationSergey Senozhatsky1-1/+3
Limiting the number of zram devices to 32 (default max_num_devices value) is confusing, let's drop it. A user with 2TB or 4TB of RAM, for example, can request as many devices as he can handle. Signed-off-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Acked-by: Minchan Kim <minchan@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-06-26zram: add `compact` sysfs entry to documentationSergey Senozhatsky1-1/+1
We currently don't support zram on-demand device creation. The only way to have N zram devices is to specify num_devices module parameter (default value 1). That means that if, for some reason, at some point, user wants to have N + 1 devies he/she must umount all the existing devices, unload the module, load the module passing num_devices equals to N + 1. This patchset introduces zram-control sysfs class, which has two sysfs attrs: - hot_add -- add a new zram device - hot_remove -- remove a specific (device_id) zram device Usage example: # add a new specific zram device cat /sys/class/zram-control/hot_add 1 # remove a specific zram device echo 4 > /sys/class/zram-control/hot_remove This patch (of 10): Briefly describe missing `compact` sysfs entry. Signed-off-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Acked-by: Minchan Kim <minchan@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-04-17Merge branch 'for-4.1/drivers' of git://git.kernel.dk/linux-blockLinus Torvalds1-17/+31
Pull block driver updates from Jens Axboe: "This is the block driver pull request for 4.1. As with the core bits, this is a relatively slow round. This pull request contains: - Various fixes and cleanups for NVMe, from Alexey Khoroshilov, Chong Yuan, myself, Keith Busch, and Murali Iyer. - Documentation and code cleanups for nbd from Markus Pargmann. - Change of brd maintainer to me, from Ross Zwisler. At least the email doesn't bounce anymore then. - Two xen-blkback fixes from Tao Chen" * 'for-4.1/drivers' of git://git.kernel.dk/linux-block: (23 commits) NVMe: Meta data handling through submit io ioctl NVMe: Add translation for block limits NVMe: Remove check for null NVMe: Fix error handling of class_create("nvme") xen-blkback: define pr_fmt macro to avoid the duplication of DRV_PFX xen-blkback: enlarge the array size of blkback name nbd: Return error pointer directly nbd: Return error code directly nbd: Remove fixme that was already fixed nbd: Restructure debugging prints nbd: Fix device bytesize type nbd: Replace kthread_create with kthread_run nbd: Remove kernel internal header Documentation: nbd: Add list of module parameters Documentation: nbd: Reformat to allow more documentation NVMe: increase depth of admin queue nvme: Fix PRP list calculation for non-4k system page size NVMe: Fix blk-mq hot cpu notification NVMe: embedded iod mask cleanup NVMe: Freeze admin queue on device failure ...
2015-04-16zram: deprecate zram attrs sysfs nodesSergey Senozhatsky1-0/+16
Add Documentation/ABI/obsolete/sysfs-block-zram file and list obsolete and deprecated attributes there. The patch also adds additional information to zram documentation and describes the basic strategy: - the existing RW nodes will be downgraded to WO nodes (in 4.11) - deprecated RO sysfs nodes will eventually be removed (in 4.11) Users will be additionally notified about deprecated attr usage by pr_warn_once() (added to every deprecated attr _show()), as suggested by Minchan Kim. User space is advised to use zram<id>/stat, zram<id>/io_stat and zram<id>/mm_stat files. Signed-off-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Reported-by: Minchan Kim <minchan@kernel.org> Cc: Nitin Gupta <ngupta@vflare.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-04-16zram: export new 'mm_stat' sysfs attrsSergey Senozhatsky1-0/+12
Per-device `zram<id>/mm_stat' file provides mm statistics of a particular zram device in a format similar to block layer statistics. The file consists of a single line and represents the following stats (separated by whitespace): orig_data_size compr_data_size mem_used_total mem_limit mem_used_max zero_pages num_migrated Signed-off-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Acked-by: Minchan Kim <minchan@kernel.org> Cc: Nitin Gupta <ngupta@vflare.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-04-16zram: export new 'io_stat' sysfs attrsSergey Senozhatsky1-0/+11
Per-device `zram<id>/io_stat' file provides accumulated I/O statistics of particular zram device in a format similar to block layer statistics. The file consists of a single line and represents the following stats (separated by whitespace): failed_reads failed_writes invalid_io notify_free Signed-off-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Acked-by: Minchan Kim <minchan@kernel.org> Cc: Nitin Gupta <ngupta@vflare.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-04-16zram: describe device attrs in documentationSergey Senozhatsky1-14/+34
Briefly describe exported device stat attrs in zram documentation. We will eventually get rid of per-stat sysfs nodes and, thus, clean up Documentation/ABI/testing/sysfs-block-zram file, which is the only source of information about device sysfs nodes. Add `num_migrated' description, since there is no independent `num_migrated' sysfs node (and no corresponding sysfs-block-zram entry), it will be exported via zram<id>/mm_stat file. At this point we can provide minimal description, because sysfs-block-zram still contains detailed information. Signed-off-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Acked-by: Minchan Kim <minchan@kernel.org> Cc: Nitin Gupta <ngupta@vflare.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-04-02Documentation: nbd: Add list of module parametersMarkus Pargmann1-0/+10
Add a list of available module parameters as attachment to the documentation. Signed-off-by: Markus Pargmann <mpa@pengutronix.de> Signed-off-by: Jens Axboe <axboe@fb.com>
2015-04-02Documentation: nbd: Reformat to allow more documentationMarkus Pargmann1-15/+19
Reformat the existing documentation to have more structure. This allows for more documentation seperated from the existing paragraphs. Signed-off-by: Markus Pargmann <mpa@pengutronix.de> Signed-off-by: Jens Axboe <axboe@fb.com>
2014-10-10zram: report maximum used memoryMinchan Kim1-0/+1
Normally, zram user could get maximum memory usage zram consumed via polling mem_used_total with sysfs in userspace. But it has a critical problem because user can miss peak memory usage during update inverval of polling. For avoiding that, user should poll it with shorter interval(ie, 0.0000000001s) with mlocking to avoid page fault delay when memory pressure is heavy. It would be troublesome. This patch adds new knob "mem_used_max" so user could see the maximum memory usage easily via reading the knob and reset it via "echo 0 > /sys/block/zram0/mem_used_max". Signed-off-by: Minchan Kim <minchan@kernel.org> Reviewed-by: Dan Streetman <ddstreet@ieee.org> Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Cc: Jerome Marchand <jmarchan@redhat.com> Cc: <juno.choi@lge.com> Cc: <seungho1.park@lge.com> Cc: Luigi Semenzato <semenzato@google.com> Cc: Nitin Gupta <ngupta@vflare.org> Cc: Seth Jennings <sjennings@variantweb.net> Reviewed-by: David Horner <ds2horner@gmail.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-10-10zram: zram memory size limitationMinchan Kim1-4/+20
Since zram has no control feature to limit memory usage, it makes hard to manage system memrory. This patch adds new knob "mem_limit" via sysfs to set up the a limit so that zram could fail allocation once it reaches the limit. In addition, user could change the limit in runtime so that he could manage the memory more dynamically. Initial state is no limit so it doesn't break old behavior. [akpm@linux-foundation.org: fix typo, per Sergey] Signed-off-by: Minchan Kim <minchan@kernel.org> Cc: Dan Streetman <ddstreet@ieee.org> Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Cc: Jerome Marchand <jmarchan@redhat.com> Cc: <juno.choi@lge.com> Cc: <seungho1.park@lge.com> Cc: Luigi Semenzato <semenzato@google.com> Cc: Nitin Gupta <ngupta@vflare.org> Cc: Seth Jennings <sjennings@variantweb.net> Cc: David Horner <ds2horner@gmail.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Minchan Kim <minchan@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-04-08zram: propagate error to userMinchan Kim1-4/+5
When we initialized zcomp with single, we couldn't change max_comp_streams without zram reset but current interface doesn't show any error to user and even it changes max_comp_streams's value without any effect so it would make user very confusing. This patch prevents max_comp_streams's change when zcomp was initialized as single zcomp and emit the error to user(ex, echo). [akpm@linux-foundation.org: don't return with the lock held, per Sergey] [fengguang.wu@intel.com: fix coccinelle warnings] Signed-off-by: Minchan Kim <minchan@kernel.org> Cc: Nitin Gupta <ngupta@vflare.org> Cc: Jerome Marchand <jmarchan@redhat.com> Acked-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Signed-off-by: Fengguang Wu <fengguang.wu@intel.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-04-08zram: make compression algorithm selection possibleSergey Senozhatsky1-5/+19
Add and document `comp_algorithm' device attribute. This attribute allows to show supported compression and currently selected compression algorithms: cat /sys/block/zram0/comp_algorithm [lzo] lz4 and change selected compression algorithm: echo lzo > /sys/block/zram0/comp_algorithm Signed-off-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Acked-by: Minchan Kim <minchan@kernel.org> Cc: Jerome Marchand <jmarchan@redhat.com> Cc: Nitin Gupta <ngupta@vflare.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-04-08zram: add multi stream functionalitySergey Senozhatsky1-5/+26
Existing zram (zcomp) implementation has only one compression stream (buffer and algorithm private part), so in order to prevent data corruption only one write (compress operation) can use this compression stream, forcing all concurrent write operations to wait for stream lock to be released. This patch changes zcomp to keep a compression streams list of user-defined size (via sysfs device attr). Each write operation still exclusively holds compression stream, the difference is that we can have N write operations (depending on size of streams list) executing in parallel. See TEST section later in commit message for performance data. Introduce struct zcomp_strm_multi and a set of functions to manage zcomp_strm stream access. zcomp_strm_multi has a list of idle zcomp_strm structs, spinlock to protect idle list and wait queue, making it possible to perform parallel compressions. The following set of functions added: - zcomp_strm_multi_find()/zcomp_strm_multi_release() find and release a compression stream, implement required locking - zcomp_strm_multi_create()/zcomp_strm_multi_destroy() create and destroy zcomp_strm_multi zcomp ->strm_find() and ->strm_release() callbacks are set during initialisation to zcomp_strm_multi_find()/zcomp_strm_multi_release() correspondingly. Each time zcomp issues a zcomp_strm_multi_find() call, the following set of operations performed: - spin lock strm_lock - if idle list is not empty, remove zcomp_strm from idle list, spin unlock and return zcomp stream pointer to caller - if idle list is empty, current adds itself to wait queue. it will be awaken by zcomp_strm_multi_release() caller. zcomp_strm_multi_release(): - spin lock strm_lock - add zcomp stream to idle list - spin unlock, wake up sleeper Minchan Kim reported that spinlock-based locking scheme has demonstrated a severe perfomance regression for single compression stream case, comparing to mutex-based (see https://lkml.org/lkml/2014/2/18/16) base spinlock mutex ==Initial write ==Initial write ==Initial write records: 5 records: 5 records: 5 avg: 1642424.35 avg: 699610.40 avg: 1655583.71 std: 39890.95(2.43%) std: 232014.19(33.16%) std: 52293.96 max: 1690170.94 max: 1163473.45 max: 1697164.75 min: 1568669.52 min: 573429.88 min: 1553410.23 ==Rewrite ==Rewrite ==Rewrite records: 5 records: 5 records: 5 avg: 1611775.39 avg: 501406.64 avg: 1684419.11 std: 17144.58(1.06%) std: 15354.41(3.06%) std: 18367.42 max: 1641800.95 max: 531356.78 max: 1706445.84 min: 1593515.27 min: 488817.78 min: 1655335.73 When only one compression stream available, mutex with spin on owner tends to perform much better than frequent wait_event()/wake_up(). This is why single stream implemented as a special case with mutex locking. Introduce and document zram device attribute max_comp_streams. This attr shows and stores current zcomp's max number of zcomp streams (max_strm). Extend zcomp's zcomp_create() with `max_strm' parameter. `max_strm' limits the number of zcomp_strm structs in compression backend's idle list (max_comp_streams). max_comp_streams used during initialisation as follows: -- passing to zcomp_create() max_strm equals to 1 will initialise zcomp using single compression stream zcomp_strm_single (mutex-based locking). -- passing to zcomp_create() max_strm greater than 1 will initialise zcomp using multi compression stream zcomp_strm_multi (spinlock-based locking). default max_comp_streams value is 1, meaning that zram with single stream will be initialised. Later patch will introduce configuration knob to change max_comp_streams on already initialised and used zcomp. TEST iozone -t 3 -R -r 16K -s 60M -I +Z test base 1 strm (mutex) 3 strm (spinlock) ----------------------------------------------------------------------- Initial write 589286.78 583518.39 718011.05 Rewrite 604837.97 596776.38 1515125.72 Random write 584120.11 595714.58 1388850.25 Pwrite 535731.17 541117.38 739295.27 Fwrite 1418083.88 1478612.72 1484927.06 Usage example: set max_comp_streams to 4 echo 4 > /sys/block/zram0/max_comp_streams show current max_comp_streams (default value is 1). cat /sys/block/zram0/max_comp_streams Signed-off-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Acked-by: Minchan Kim <minchan@kernel.org> Cc: Jerome Marchand <jmarchan@redhat.com> Cc: Nitin Gupta <ngupta@vflare.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-04-08zram: document failed_reads, failed_writes statsSergey Senozhatsky1-1/+2
Document `failed_reads' and `failed_writes' device attributes. Remove info about `discard' - there is no such zram attr. Signed-off-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Jerome Marchand <jmarchan@redhat.com> Cc: Nitin Gupta <ngupta@vflare.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-04-08zram: move zram size warning to documentationSergey Senozhatsky1-0/+5
Move zram warning about disksize and size of memory correlation to zram documentation. Signed-off-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Acked-by: Minchan Kim <minchan@kernel.org> Cc: Jerome Marchand <jmarchan@redhat.com> Cc: Nitin Gupta <ngupta@vflare.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-02-17drbd: Describe the future high-level structure of DRBDAndreas Gruenbacher1-0/+38
The following commits will successively transform DRBD into the structure described here. Signed-off-by: Andreas Gruenbacher <agruen@linbit.com> Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
2014-01-31zram: remove old private project commentMinchan Kim1-6/+0
Remove the old private compcache project address so upcoming patches should be sent to LKML because we Linux kernel community will take care. Signed-off-by: Minchan Kim <minchan@kernel.org> Cc: Nitin Gupta <ngupta@vflare.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-01-31zram: promote zram from stagingMinchan Kim1-0/+77
Zram has lived in staging for a LONG LONG time and have been fixed/improved by many contributors so code is clean and stable now. Of course, there are lots of product using zram in real practice. The major TV companys have used zram as swap since two years ago and recently our production team released android smart phone with zram which is used as swap, too and recently Android Kitkat start to use zram for small memory smart phone. And there was a report Google released their ChromeOS with zram, too and cyanogenmod have been used zram long time ago. And I heard some disto have used zram block device for tmpfs. In addition, I saw many report from many other peoples. For example, Lubuntu start to use it. The benefit of zram is very clear. With my experience, one of the benefit was to remove jitter of video application with backgroud memory pressure. It would be effect of efficient memory usage by compression but more issue is whether swap is there or not in the system. Recent mobile platforms have used JAVA so there are many anonymous pages. But embedded system normally are reluctant to use eMMC or SDCard as swap because there is wear-leveling and latency issues so if we do not use swap, it means we can't reclaim anoymous pages and at last, we could encounter OOM kill. :( Although we have real storage as swap, it was a problem, too. Because it sometime ends up making system very unresponsible caused by slow swap storage performance. Quote from Luigi on Google "Since Chrome OS was mentioned: the main reason why we don't use swap to a disk (rotating or SSD) is because it doesn't degrade gracefully and leads to a bad interactive experience. Generally we prefer to manage RAM at a higher level, by transparently killing and restarting processes. But we noticed that zram is fast enough to be competitive with the latter, and it lets us make more efficient use of the available RAM. " and he announced. http://www.spinics.net/lists/linux-mm/msg57717.html Other uses case is to use zram for block device. Zram is block device so anyone can format the block device and mount on it so some guys on the internet start zram as /var/tmp. http://forums.gentoo.org/viewtopic-t-838198-start-0.html Let's promote zram and enhance/maintain it instead of removing. Signed-off-by: Minchan Kim <minchan@kernel.org> Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Acked-by: Nitin Gupta <ngupta@vflare.org> Acked-by: Pekka Enberg <penberg@kernel.org> Cc: Bob Liu <bob.liu@oracle.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Hugh Dickins <hughd@google.com> Cc: Jens Axboe <axboe@kernel.dk> Cc: Luigi Semenzato <semenzato@google.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Rik van Riel <riel@redhat.com> Cc: Seth Jennings <sjenning@linux.vnet.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>