summaryrefslogtreecommitdiff
path: root/Documentation/driver-api
AgeCommit message (Collapse)AuthorFilesLines
2023-02-26Merge tag 'media/v6.3-1' of ↵Linus Torvalds4-63/+12
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media Pull media updates from Mauro Carvalho Chehab: - Removal of several VB1-only deprecated drivers: cpia2, fsl-viu, meye, stkwebcam, tm6000, vpfe_capture and zr364xx - saa7146 recovered from staging/deprecated. We opted to give ti a chance, and, instead of deprecating it, the intention is to write patches migrating it from VB1 to VB2. - av7110 returned from staging/deprecated/ to staging/ as we're not planning on dropping it any time soon - media controller API has gained experimental support for G_ROUTING and streams API. No drivers use it right now. We're planning to add one after -rc1, giving some time to experience the API and eventually have changes during the next development cycle - New sensor drivers: imx296, imx415, ov8858 - Atomisp had lots of changes, specially on its sensor's interface, making atomisp sensor drivers closer to normal sensor drivers - media controller kAPI has gained some helpers to traverse pipelines - uvcvideo now better support power line control - lots of bug fixes, cleanups and driver improvements * tag 'media/v6.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (296 commits) media: imx-mipi-csis: Check csis_fmt validity before use media: v4l2-subdev.c: clear stream field media: v4l2-ctrls-api.c: move ctrl->is_new = 1 to the correct line media: Revert "media: saa7146: deprecate hexium_gemini/orion, mxb and ttpci" media: Revert "media: av7110: move to staging/media/deprecated/saa7146" media: imx-pxp: convert to regmap media: imx-pxp: Use non-threaded IRQ media: imx-pxp: Introduce pxp_read() and pxp_write() wrappers media: imx-pxp: Implement frame size enumeration media: imx-pxp: Pass pixel format value to find_format() media: imx-pxp: Add media controller support media: imx-pxp: Don't set bus_info manually in .querycap() media: imx-pxp: Sort headers alphabetically media: imx-pxp: add support for i.MX7D media: imx-pxp: make data_path_ctrl0 platform dependent media: imx-pxp: disable LUT block media: imx-pxp: explicitly disable unused blocks media: imx-pxp: extract helper function to setup data path media: imx-pxp: detect PXP version media: dt-bindings: media: fsl-pxp: convert to yaml ...
2023-02-25Merge tag 'vfio-v6.3-rc1' of https://github.com/awilliam/linux-vfioLinus Torvalds2-129/+61
Pull VFIO updates from Alex Williamson: - Remove redundant resource check in vfio-platform (Angus Chen) - Use GFP_KERNEL_ACCOUNT for persistent userspace allocations, allowing removal of arbitrary kernel limits in favor of cgroup control (Yishai Hadas) - mdev tidy-ups, including removing the module-only build restriction for sample drivers, Kconfig changes to select mdev support, documentation movement to keep sample driver usage instructions with sample drivers rather than with API docs, remove references to out-of-tree drivers in docs (Christoph Hellwig) - Fix collateral breakages from mdev Kconfig changes (Arnd Bergmann) - Make mlx5 migration support match device support, improve source and target flows to improve pre-copy support and reduce downtime (Yishai Hadas) - Convert additional mdev sysfs case to use sysfs_emit() (Bo Liu) - Resolve copy-paste error in mdev mbochs sample driver Kconfig (Ye Xingchen) - Avoid propagating missing reset error in vfio-platform if reset requirement is relaxed by module option (Tomasz Duszynski) - Range size fixes in mlx5 variant driver for missed last byte and stricter range calculation (Yishai Hadas) - Fixes to suspended vaddr support and locked_vm accounting, excluding mdev configurations from the former due to potential to indefinitely block kernel threads, fix underflow and restore locked_vm on new mm (Steve Sistare) - Update outdated vfio documentation due to new IOMMUFD interfaces in recent kernels (Yi Liu) - Resolve deadlock between group_lock and kvm_lock, finally (Matthew Rosato) - Fix NULL pointer in group initialization error path with IOMMUFD (Yan Zhao) * tag 'vfio-v6.3-rc1' of https://github.com/awilliam/linux-vfio: (32 commits) vfio: Fix NULL pointer dereference caused by uninitialized group->iommufd docs: vfio: Update vfio.rst per latest interfaces vfio: Update the kdoc for vfio_device_ops vfio/mlx5: Fix range size calculation upon tracker creation vfio: no need to pass kvm pointer during device open vfio: fix deadlock between group lock and kvm lock vfio: revert "iommu driver notify callback" vfio/type1: revert "implement notify callback" vfio/type1: revert "block on invalid vaddr" vfio/type1: restore locked_vm vfio/type1: track locked_vm per dma vfio/type1: prevent underflow of locked_vm via exec() vfio/type1: exclude mdevs from VFIO_UPDATE_VADDR vfio: platform: ignore missing reset if disabled at module init vfio/mlx5: Improve the target side flow to reduce downtime vfio/mlx5: Improve the source side flow upon pre_copy vfio/mlx5: Check whether VF is migratable samples: fix the prompt about SAMPLE_VFIO_MDEV_MBOCHS vfio/mdev: Use sysfs_emit() to instead of sprintf() vfio-mdev: add back CONFIG_VFIO dependency ...
2023-02-25Merge tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhostLinus Torvalds4-0/+354
Pull virtio updates from Michael Tsirkin: - device feature provisioning in ifcvf, mlx5 - new SolidNET driver - support for zoned block device in virtio blk - numa support in virtio pmem - VIRTIO_F_RING_RESET support in vhost-net - more debugfs entries in mlx5 - resume support in vdpa - completion batching in virtio blk - cleanup of dma api use in vdpa - now simulating more features in vdpa-sim - documentation, features, fixes all over the place * tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost: (64 commits) vdpa/mlx5: support device features provisioning vdpa/mlx5: make MTU/STATUS presence conditional on feature bits vdpa: validate device feature provisioning against supported class vdpa: validate provisioned device features against specified attribute vdpa: conditionally read STATUS in config space vdpa: fix improper error message when adding vdpa dev vdpa/mlx5: Initialize CVQ iotlb spinlock vdpa/mlx5: Don't clear mr struct on destroy MR vdpa/mlx5: Directly assign memory key tools/virtio: enable to build with retpoline vringh: fix a typo in comments for vringh_kiov vhost-vdpa: print warning when vhost_vdpa_alloc_domain fails scsi: virtio_scsi: fix handling of kmalloc failure vdpa: Fix a couple of spelling mistakes in some messages vhost-net: support VIRTIO_F_RING_RESET vhost-scsi: convert sysfs snprintf and sprintf to sysfs_emit vdpa: mlx5: support per virtqueue dma device vdpa: set dma mask for vDPA device virtio-vdpa: support per vq dma device vdpa: introduce get_vq_dma_device() ...
2023-02-25Merge tag 'phy-for-6.3' of ↵Linus Torvalds1-10/+14
git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy Pull phy updates from Vinod Koul: "This features a bunch of new device support, a couple of new drivers, yaml conversion and updates of a few drivers. Core support: - New devm_of_phy_optional_get() API with users and conversion New hardware support: - Mediatek MT7986 phy support - Qualcomm SM8550 UFS, PCIe, combo phy support, SM6115 / SM4250 USB3 phy support, SM6350 combo phy support, SM6125 UFS PHY support amd SM8350 & SM8450 combo phy support - Qualcomm SNPS eUSB2 eUSB2 repeater drivers - Allwinner F1C100s USB PHY support - Tegra xusb support for Tegra234 Updates: - Yaml conversion for Qualcomm pcie2 phy and usb-hsic-phy - G4 mode support in Qualcomm UFS phy and support for various SoCs - Yaml conversion for Meson usb2 phy - TI Type C support for usb phy for j721 - Yaml conversion for Tegra xusb binding" * tag 'phy-for-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy: (106 commits) phy: qcom: phy-qcom-snps-eusb2: Add support for eUSB2 repeater phy: qcom: Add QCOM SNPS eUSB2 repeater driver dt-bindings: phy: qcom,snps-eusb2-phy: Add phys property for the repeater dt-bindings: phy: Add qcom,snps-eusb2-repeater schema file dt-bindings: phy: amlogic,g12a-usb3-pcie-phy: add missing optional phy-supply property phy: rockchip-typec: Fix unsigned comparison with less than zero phy: rockchip-typec: fix tcphy_get_mode error case phy: qcom: snps-eusb2: Add missing headers phy: qcom-qmp-combo: Add support for SM8550 phy: qcom-qmp: Add v6 DP register offsets phy: qcom-qmp: pcs-usb: Add v6 register offsets dt-bindings: phy: qcom,sc8280xp-qmp-usb43dp: Document SM8550 compatible phy: qcom: Add QCOM SNPS eUSB2 driver dt-bindings: phy: Add qcom,snps-eusb2-phy schema file phy: qcom-qmp-pcie: Add support for SM8550 g3x2 and g4x2 PCIEs phy: qcom-qmp: qserdes-lane-shared: Add v6 register offsets phy: qcom-qmp: qserdes-txrx: Add v6.20 register offsets phy: qcom-qmp: pcs-pcie: Add v6.20 register offsets phy: qcom-qmp: pcs-pcie: Add v6 register offsets phy: qcom-qmp: pcs: Add v6.20 register offsets ...
2023-02-24Merge tag 'tty-6.3-rc1' of ↵Linus Torvalds1-0/+19
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty Pull tty / serial driver updates from Greg KH: "Here is the big set of serial and tty driver updates for 6.3-rc1. Once again, Jiri and Ilpo have done a number of core vt and tty/serial layer cleanups that were much needed and appreciated. Other than that, it's just a bunch of little tty/serial driver updates: - qcom-geni-serial driver updates - liteuart driver updates - hvcs driver cleanups - n_gsm updates and additions for new features - more 8250 device support added - fpga/dfl update and additions - imx serial driver updates - fsl_lpuart updates - other tiny fixes and updates for serial drivers All of these have been in linux-next for a while with no reported problems" * tag 'tty-6.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (143 commits) tty: n_gsm: add keep alive support serial: imx: remove a redundant check dt-bindings: serial: snps-dw-apb-uart: add dma & dma-names properties soc: qcom: geni-se: Move qcom-geni-se.h to linux/soc/qcom/geni-se.h tty: n_gsm: add TIOCMIWAIT support tty: n_gsm: add RING/CD control support tty: n_gsm: mark unusable ioctl structure fields accordingly serial: imx: get rid of registers shadowing serial: imx: refine local variables in rxint() serial: imx: stop using USR2 in FIFO reading loop serial: imx: remove redundant USR2 read from FIFO reading loop serial: imx: do not break from FIFO reading loop prematurely serial: imx: do not sysrq broken chars serial: imx: work-around for hardware RX flood serial: imx: factor-out common code to imx_uart_soft_reset() serial: 8250_pci1xxxx: Add power management functions to quad-uart driver serial: 8250_pci1xxxx: Add RS485 support to quad-uart driver serial: 8250_pci1xxxx: Add driver for quad-uart support serial: 8250_pci: Add serial8250_pci_setup_port definition in 8250_pcilib.c tty: pcn_uart: fix memory leak with using debugfs_lookup() ...
2023-02-22Merge tag 'docs-6.3' of git://git.lwn.net/linuxLinus Torvalds21-28/+30
Pull documentation updates from Jonathan Corbet: "It has been a moderately calm cycle for documentation; the significant changes include: - Some significant additions to the memory-management documentation - Some improvements to navigation in the HTML-rendered docs - More Spanish and Chinese translations ... and the usual set of typo fixes and such" * tag 'docs-6.3' of git://git.lwn.net/linux: (68 commits) Documentation/watchdog/hpwdt: Fix Format Documentation/watchdog/hpwdt: Fix Reference Documentation: core-api: padata: correct spelling docs/mm: Physical Memory: correct spelling in reference to CONFIG_PAGE_EXTENSION docs: Use HTML comments for the kernel-toc SPDX line docs: Add more information to the HTML sidebar Documentation: KVM: Update AMD memory encryption link printk: Document that CONFIG_BOOT_PRINTK_DELAY required for boot_delay= Documentation: userspace-api: correct spelling Documentation: sparc: correct spelling Documentation: driver-api: correct spelling Documentation: admin-guide: correct spelling docs: add workload-tracing document to admin-guide docs/admin-guide/mm: remove useless markup docs/mm: remove useless markup docs/mm: Physical Memory: remove useless markup docs/sp_SP: Add process magic-number translation docs: ftrace: always use canonical ftrace path Doc/damon: fix the data path error dma-buf: Add "dma-buf" to title of documentation ...
2023-02-22Merge tag 'pinctrl-v6.3-1' of ↵Linus Torvalds1-255/+243
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl Pull pin control updates from Linus Walleij: "Nothing special, notably a lot of new Qualcomm hardware is supported, a RISC-V reference SoC and then some cleanups both in code and device tree bindings. Core changes: - Add PINCTRL_PINFUNCTION() macro and use it in several drivers New drivers: - New driver for the StarFive JH7110 SoC "sys" and "aon" (always-on) pin controllers. (RISC-V.) - New subdriver for the Qualcomm QDU1000/QRU1000 SoC pin controller - New subdrivers for the Qualcomm SM8550 SoC and LPASS pin controllers - New subdriver for the Qualcomm SA8775P SoC pin controller - New subdriver for the Qualcomm IPQ5332 SoC pin controller - New (trivial) support for Qualcomm PM8550 and PMR735D PMIC pin control - New subdriver for the Mediatek MT7981 SoC pin controller Improvements: - Several cleanups and refactorings to the Intel drivers - Add 4KOhm bias support to the Intel driver - Use the NOIRQ_SYSTEM_SLEEP_PM_OPS for the AT91 driver - Support general purpose clocks in the Qualcomm MSM8226 SoC - Several conversions to use the new I2C .probe_new() call - Massive clean-up of the Qualcomm Device Tree YAML schemas - Add VIN[45] pins, groups and functions to the Renesas r8a77950 SoC driver" * tag 'pinctrl-v6.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (118 commits) pinctrl: qcom: Add support for i2c specific pull feature pinctrl: starfive: Add StarFive JH7110 aon controller driver pinctrl: starfive: Add StarFive JH7110 sys controller driver dt-bindings: pinctrl: Add StarFive JH7110 aon pinctrl dt-bindings: pinctrl: Add StarFive JH7110 sys pinctrl pinctrl: add mt7981 pinctrl driver dt-bindings: pinctrl: add bindings for MT7981 SoC dt-bindings: pinctrl: rockchip,pinctrl: mark gpio sub nodes of pinctrl as deprecated pinctrl: qcom: Introduce IPQ5332 TLMM driver dt-bindings: pinctrl: qcom: add IPQ5332 pinctrl dt-bindings: pinctrl: qcom: lpass-lpi: correct GPIO name pattern pinctrl: qcom: pinctrl-sm8550-lpass-lpi: add SM8550 LPASS dt-bindings: pinctrl: qcom,sm8550-lpass-lpi-pinctrl: add SM8550 LPASS pinctrl: at91: use devm_kasprintf() to avoid potential leaks dt-bindings: pinctrl: qcom: correct gpio-ranges in examples dt-bindings: pinctrl: qcom,msm8994: correct number of GPIOs dt-bindings: pinctrl: qcom,sdx55: correct GPIO name pattern dt-bindings: pinctrl: qcom,msm8953: correct GPIO name pattern dt-bindings: pinctrl: qcom,sm6375: correct GPIO name pattern and example dt-bindings: pinctrl: qcom,msm8909: correct GPIO name pattern and example ...
2023-02-22Merge tag 'gpio-updates-for-v6.3' of ↵Linus Torvalds1-17/+0
git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux Pull gpio updates from Bartosz Golaszewski: "A rather small update, there are no new drivers, just improvements and refactoring in existing ones. Thanks to migrating of several drivers to using generalized APIs and dropping of OF interfaces in favor of using software nodes we're actually removing more code than we're adding. Core GPIOLIB: - drop several OF interfaces after moving a significant part of the code to using software nodes - remove more interfaces referring to the global GPIO numberspace that we're getting rid of - improvements in the gpio-regmap library - add helper for GPIO device reference counting - remove unused APIs - minor tweaks like sorting headers alphabetically Extended support in existing drivers: - add support for Tegra 234 PMC to gpio-tegra186 Driver improvements: - migrate the 104-dio/idi family of drivers to using the regmap-irq API - migrate gpio-i8255 and gpio-mm to the GPIO regmap API - clean-ups in gpio-pca953x - remove duplicate assignments of of_gpio_n_cells in gpio-davinci, gpio-ge, gpio-xilinx, gpio-zevio and gpio-wcd934x - improvements to gpio-pcf857x: implement get/set_multiple callbacks, use generic device properties instead of OF + minor tweaks - fix OF-related header includes and Kconfig dependencies in gpio-zevio - dynamically allocate the GPIO base in gpio-omap - use a dedicated printf specifier for printing fwnode info in gpio-sim - use dev_name() for the GPIO chip label in gpio-vf610 - other minor tweaks and fixes Documentation: - remove mentions of legacy API from comments in various places - convert the DT binding documents to YAML schema for Fujitsu MB86S7x, Unisoc GPIO and Unisoc EIC - document the Unisoc UMS512 controller in DT bindings" * tag 'gpio-updates-for-v6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux: (54 commits) gpio: sim: Use %pfwP specifier instead of calling fwnode API directly gpio: tegra186: remove unneeded loop in tegra186_gpio_init_route_mapping() gpiolib: of: Move enum of_gpio_flags to its only user gpio: mvebu: Use IS_REACHABLE instead of IS_ENABLED for CONFIG_PWM gpio: zevio: Add missing header gpio: Get rid of gpio_to_chip() gpio: pcf857x: Drop unneeded explicit casting gpio: pcf857x: Make use of device properties gpio: pcf857x: Get rid of legacy platform data gpio: rockchip: Do not mention legacy API in the code gpio: wcd934x: Remove duplicate assignment of of_gpio_n_cells gpio: zevio: Use proper headers and drop OF_GPIO dependency gpio: zevio: Remove duplicate assignment of of_gpio_n_cells gpio: xilinx: Remove duplicate assignment of of_gpio_n_cells dt-bindings: gpio: Add compatible string for Unisoc UMS512 dt-bindings: gpio: Convert Unisoc EIC controller binding to yaml dt-bindings: gpio: Convert Unisoc GPIO controller binding to yaml gpio: ge: Remove duplicate assignment of of_gpio_n_cells gpio: davinci: Remove duplicate assignment of of_gpio_n_cells gpio: omap: use dynamic allocation of base ...
2023-02-22Merge tag 'platform-drivers-x86-v6.3-1' of ↵Linus Torvalds2-23/+25
git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86 Pull x86 platform driver updates from Hans de Goede: - AMD PMC: Improvements to aid s2idle debugging - Dell WMI-DDV: hwmon support - INT3472 camera sensor power-management: Improve privacy LED support - Intel VSEC: Base TPMI (Topology Aware Register and PM Capsule Interface) support - Mellanox: SN5600 and Nvidia L1 switch support - Microsoft Surface Support: Various cleanups + code improvements - tools/intel-speed-select: Various improvements - Miscellaneous other cleanups / fixes * tag 'platform-drivers-x86-v6.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86: (80 commits) platform/x86: nvidia-wmi-ec-backlight: Add force module parameter platform/x86/amd/pmf: Add depends on CONFIG_POWER_SUPPLY platform/x86: dell-ddv: Prefer asynchronous probing platform/x86: dell-ddv: Add hwmon support Documentation/ABI: Add new attribute for mlxreg-io sysfs interfaces platform: mellanox: mlx-platform: Move bus shift assignment out of the loop platform: mellanox: mlx-platform: Add mux selection register to regmap platform_data/mlxreg: Add field with mapped resource address platform/mellanox: mlxreg-hotplug: Allow more flexible hotplug events configuration platform: mellanox: Extend all systems with I2C notification callback platform: mellanox: Split logic in init and exit flow platform: mellanox: Split initialization procedure platform: mellanox: Introduce support of new Nvidia L1 switch platform: mellanox: Introduce support for next-generation 800GB/s switch platform: mellanox: Cosmetic changes - rename to more common name platform: mellanox: Change "reset_pwr_converter_fail" attribute platform: mellanox: Introduce support for rack manager switch MAINTAINERS: dell-wmi-sysman: drop Divya Bharathi x86/platform/uv: Make kobj_type structure constant platform/x86: think-lmi: Make kobj_type structure constant ...
2023-02-21Merge tag 'thermal-6.3-rc1' of ↵Linus Torvalds3-321/+3
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull thermal control updates from Rafael Wysocki: "The majority of changes here are related to the general switch-over to using arrays of generic trip point structures registered along with a thermal zone instead of trip point callbacks (this has been done mostly by Daniel Lezcano with some help from yours truly on the Intel drivers front). Apart from that and the related reorganization of code, there are some enhancements of the existing driver and a new Mediatek Low Voltage Thermal Sensor (LVTS) driver. The Intel powerclamp undergoes a major rework so it will use the generic idle_inject facility for CPU idle time injection going forward and it will take additional module parameters for specifying the subset of CPUs to be affected by it (work done by Srinivas Pandruvada). Also included are assorted fixes and a whole bunch of cleanups. Specifics: - Rework a large bunch of drivers to use the generic thermal trip structure and use the opportunity to do more cleanups by removing unused functions from the OF code (Daniel Lezcano) - Remove core header inclusion from drivers (Daniel Lezcano) - Fix some locking issues related to the generic thermal trip rework (Johan Hovold) - Fix a crash when requesting the critical temperature on tegra, which is related to the generic trip point work (Jon Hunter) - Clean up thermal device unregistration code (Viresh Kumar) - Fix and clean up thermal control core initialization error code paths (Daniel Lezcano) - Relocate the trip points handling code into a separate file (Daniel Lezcano) - Make the thermal core fail registration of thermal zones and cooling devices if the thermal class has not been registered (Rafael Wysocki) - Add trip point initialization helper functions for ACPI-defined trip points and modify two thermal drivers to use them (Rafael Wysocki, Daniel Lezcano) - Make the core thermal control code use sysfs_emit_at() instead of scnprintf() where applicable (ye xingchen) - Consolidate code accessing the Intel TCC (Thermal Control Circuitry) MSRs by introducing library functions for that and making the TCC-related code in thermal drivers use them (Zhang Rui) - Enhance the x86_pkg_temp_thermal driver to support dynamic tjmax changes (Zhang Rui) - Address an "unsigned expression compared with zero" warning in the intel_soc_dts_iosf thermal driver (Yang Li) - Update comments regarding two functions in the Intel Menlow thermal driver (Deming Wang) - Use sysfs_emit_at() instead of scnprintf() in the int340x thermal driver (ye xingchen) - Make the intel_pch thermal driver support the Wellsburg PCH (Tim Zimmermann) - Modify the intel_pch and processor_thermal_device_pci thermal drivers use generic trip point tables instead of thermal zone trip point callbacks (Daniel Lezcano) - Add production mode attribute sysfs attribute to the int340x thermal driver (Srinivas Pandruvada) - Rework dynamic trip point updates handling and locking in the int340x thermal driver (Rafael Wysocki) - Make the int340x thermal driver use a generic trip points table instead of thermal zone trip point callbacks (Rafael Wysocki, Daniel Lezcano) - Clean up and improve the int340x thermal driver (Rafael Wysocki) - Simplify and clean up the intel_pch thermal driver (Rafael Wysocki) - Fix the Intel powerclamp thermal driver and make it use the common idle injection framework (Srinivas Pandruvada) - Add two module parameters, cpumask and max_idle, to the Intel powerclamp thermal driver to allow it to affect only a specific subset of CPUs instead of all of them (Srinivas Pandruvada) - Make the Intel quark_dts thermal driver Use generic trip point objects instead of its own trip point representation (Daniel Lezcano) - Add toctree entry for thermal documents and fix two issues in the Intel powerclamp driver documentation (Bagas Sanjaya) - Use strscpy() to instead of strncpy() in the thermal core (Xu Panda) - Fix thermal_sampling_exit() (Vincent Guittot) - Add Mediatek Low Voltage Thermal Sensor (LVTS) driver (Balsam Chihi) - Add r8a779g0 RCar support to the rcar_gen3 thermal driver (Geert Uytterhoeven) - Fix useless call to set_trips() when resuming in the rcar_gen3 thermal control driver and add interrupt support detection at init time to it (Niklas Söderlund) - Fix memory corruption in the hi3660 thermal driver (Yongqin Liu) - Fix include path for libnl3 in pkg-config file for libthermal (Vibhav Pant) - Remove syscfg-based driver for st as the platform is not supported any more (Alain Volmat)" * tag 'thermal-6.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (135 commits) thermal/drivers/st: Remove syscfg based driver thermal: Remove core header inclusion from drivers tools/lib/thermal: Fix include path for libnl3 in pkg-config file. thermal/drivers/hisi: Drop second sensor hi3660 thermal/drivers/rcar_gen3_thermal: Fix device initialization thermal/drivers/rcar_gen3_thermal: Create device local ops struct thermal/drivers/rcar_gen3_thermal: Do not call set_trips() when resuming thermal/drivers/rcar_gen3: Add support for R-Car V4H dt-bindings: thermal: rcar-gen3-thermal: Add r8a779g0 support thermal/drivers/mediatek: Add the Low Voltage Thermal Sensor driver dt-bindings: thermal: mediatek: Add LVTS thermal controllers thermal/drivers/mediatek: Relocate driver to mediatek folder tools/lib/thermal: Fix thermal_sampling_exit() Documentation: powerclamp: Fix numbered lists formatting Documentation: powerclamp: Escape wildcard in cpumask description Documentation: admin-guide: Add toctree entry for thermal docs thermal: intel: powerclamp: Add two module parameters Documentation: admin-guide: Move intel_powerclamp documentation thermal: core: Use sysfs_emit_at() instead of scnprintf() thermal: intel: powerclamp: Fix duration module parameter ...
2023-02-21docs: driver-api: virtio: commentize spec version checkingBagas Sanjaya1-1/+1
A sentence that checks for later spec version is meant for developers hacking the documentation source. Make it comment block (hidden from actual output). Signed-off-by: Bagas Sanjaya <bagasdotme@gmail.com> Message-Id: <20221220095828.27588-4-bagasdotme@gmail.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2023-02-21docs: driver-api: virtio: slightly reword virtqueues allocation paragraphBagas Sanjaya1-4/+4
"It's at this stage that" means "At this point", so use the latter as it is more effective. Signed-off-by: Bagas Sanjaya <bagasdotme@gmail.com> Message-Id: <20221220095828.27588-3-bagasdotme@gmail.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2023-02-21docs: driver-api: virtio: parenthesize external reference targetsBagas Sanjaya1-4/+5
Parenthesize targets to links in "References" section to distinguish them from remaining texts. While at it, describe the second target. Signed-off-by: Bagas Sanjaya <bagasdotme@gmail.com> Message-Id: <20221220095828.27588-2-bagasdotme@gmail.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2023-02-16tty: n_gsm: add keep alive supportDaniel Starke1-0/+19
n_gsm is based on the 3GPP 07.010 and its newer version is the 3GPP 27.010. See https://portal.3gpp.org/desktopmodules/Specifications/SpecificationDetails.aspx?specificationId=1516 The changes from 07.010 to 27.010 are non-functional. Therefore, I refer to the newer 27.010 here. Chapters 5.4.6.3.4 and 5.1.8.1.3 describe the test command which can be used to test the mux connection between both sides. Currently, no algorithm is implemented to make use of this command. This requires that each multiplexed upper layer protocol supervises the underlying muxer connection to handle possible connection losses. Introduce ioctl commands and functions to optionally enable keep alive handling via the test command as described in chapter 5.4.6.3.4. A single incrementing octet "ka_num" is being used for unique identification of each single keep alive packet. Retries will use the same "ka_num" value as the original packet. Retry count and interval are taken from the general parameters N2 and T2. Add usage description and basic example for the new ioctl to the n_gsm documentation. Note that support for the test command is mandatory and already present in the muxer implementation since the very first version. Also note that the previous ioctl structure gsm_config cannot be extended due to missing checks against zero of the field "unused". Signed-off-by: Daniel Starke <daniel.starke@siemens.com> Link: https://lore.kernel.org/r/20230214122737.1976-1-daniel.starke@siemens.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-02-15docs: driver-api: virtio: virtio on LinuxRicardo Cañuelo4-0/+353
Basic doc about Virtio on Linux and a short tutorial on Virtio drivers. includes the following fixup: virtio: fix virtio_config_ops kerneldocs Fixes two warning messages when building htmldocs: warning: duplicate section name 'Note' warning: expecting prototype for virtio_config_ops(). Prototype was for vq_callback_t() instead Message-Id: <20221010064359.1324353-2-ricardo.canuelo@collabora.com> Signed-off-by: Ricardo Cañuelo <ricardo.canuelo@collabora.com> Reviewed-by: Cornelia Huck <cohuck@redhat.com> Message-Id: <20221220100035.2712449-1-ricardo.canuelo@collabora.com> Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Reviewed-by: Bagas Sanjaya <bagasdotme@gmail.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2023-02-09Documentation: admin-guide: Move intel_powerclamp documentationSrinivas Pandruvada2-321/+0
Create a folder "thermal" under Documentation/admin-guide and move intel_powerclamp documentation to this folder. Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2023-02-09docs: vfio: Update vfio.rst per latest interfacesYi Liu1-22/+60
this imports the latest vfio_device_ops definition to vfio.rst. Signed-off-by: Yi Liu <yi.l.liu@intel.com> Reviewed-by: Kevin Tian <kevin.tian@intel.com> Link: https://lore.kernel.org/r/20230209081210.141372-3-yi.l.liu@intel.com Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2023-02-06media: mc: entity: Fix minor issues in comments and documentationLaurent Pinchart1-6/+4
Commit ae219872834a ("media: mc: entity: Rewrite media_pipeline_start()") incorrectly referred to entity instead of pad in a comment, and forgot to update a second comment accordingly when moving the pipe from entity to pad. Furthermore, it didn't properly reflow the documentation text it updated. Fix those small issues. Fixes: ae219872834a ("media: mc: entity: Rewrite media_pipeline_start()") Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2023-02-03phy: Add devm_of_phy_optional_get() helperGeert Uytterhoeven1-2/+5
Add an optional variant of devm_of_phy_get() that also takes care of printing real errors, so drivers no longer have to open-code this operation. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/4cd0069bcff424ffc5c3a102397c02370b91985b.1674584626.git.geert+renesas@glider.be Signed-off-by: Vinod Koul <vkoul@kernel.org>
2023-02-03doc: phy: Document devm_of_phy_get()Geert Uytterhoeven1-4/+6
Add the missing documentation for devm_of_phy_get(), which was forgotten when the function was introduced. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/768d5845668f081620098a0b4479d1481e212bac.1674584626.git.geert+renesas@glider.be Signed-off-by: Vinod Koul <vkoul@kernel.org>
2023-02-03phy: Remove unused phy_optional_get()Geert Uytterhoeven1-6/+5
There were never any upstream users of this function since its introduction almost 10 years ago. Besides, the dummy for phy_optional_get() should have returned NULL instead of an error code. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/df61992b1d66bccf4e6e1eafae94a7f7d7629f34.1674584626.git.geert+renesas@glider.be Signed-off-by: Vinod Koul <vkoul@kernel.org>
2023-02-03platform/surface: aggregator: Rename top-level request functions to avoid ↵Maximilian Luz1-4/+4
ambiguities We currently have a struct ssam_request_sync and a function ssam_request_sync(). While this is valid C, there are some downsides to it. One of these is that current Sphinx versions (>= 3.0) cannot disambiguate between the two (see disucssion and pull request linked below). It instead emits a "WARNING: Duplicate C declaration" and links for the struct and function in the resulting documentation link to the same entry (i.e. both to either function or struct documentation) instead of their respective own entries. While we could just ignore that and wait for a fix, there's also a point to be made that the current naming can be somewhat confusing when searching (e.g. via grep) or trying to understand the levels of abstraction at play: We currently have struct ssam_request_sync and associated functions ssam_request_sync_[alloc|free|init|wait|...]() operating on this struct. However, function ssam_request_sync() is one abstraction level above this. Similarly, ssam_request_sync_with_buffer() is not a function operating on struct ssam_request_sync, but rather a sibling to ssam_request_sync(), both using the struct under the hood. Therefore, rename the top level request functions: ssam_request_sync() -> ssam_request_do_sync() ssam_request_sync_with_buffer() -> ssam_request_do_sync_with_buffer() ssam_request_sync_onstack() -> ssam_request_do_sync_onstack() Link: https://lore.kernel.org/all/085e0ada65c11da9303d07e70c510dc45f21315b.1656756450.git.mchehab@kernel.org/ Link: https://github.com/sphinx-doc/sphinx/pull/8313 Signed-off-by: Maximilian Luz <luzmaximilian@gmail.com> Link: https://lore.kernel.org/r/20221220175608.1436273-2-luzmaximilian@gmail.com Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2023-02-03platform/surface: aggregator: Improve documentation and handling of message ↵Maximilian Luz2-19/+21
target and source IDs The `tid_in` and `tid_out` fields of the serial hub protocol command struct (struct ssh_command) are actually source and target IDs, indicating the peer from which the message originated and the peer for which it is intended. Change the naming of those fields accordingly and improve the protocol documentation. Additionally, introduce an enum containing all currently known peers, i.e. targets and sources. Signed-off-by: Maximilian Luz <luzmaximilian@gmail.com> Link: https://lore.kernel.org/r/20221202223327.690880-3-luzmaximilian@gmail.com Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2023-02-02Documentation: driver-api: correct spellingRandy Dunlap21-24/+24
Correct spelling problems for Documentation/driver-api/ as reported by codespell. Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Cc: Mauro Carvalho Chehab <mchehab@kernel.org> Cc: linux-media@vger.kernel.org Cc: Vishal Verma <vishal.l.verma@intel.com> Cc: Dave Jiang <dave.jiang@intel.com> Cc: nvdimm@lists.linux.dev Cc: Vinod Koul <vkoul@kernel.org> Cc: dmaengine@vger.kernel.org Cc: linux-raid@vger.kernel.org Cc: linux-usb@vger.kernel.org Acked-by: Dan Williams <dan.j.williams@intel.com> Acked-by: Song Liu <song@kernel.org> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Link: https://lore.kernel.org/r/20230129231053.20863-3-rdunlap@infradead.org Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2023-01-31dma-buf: Add "dma-buf" to title of documentationJonathan Neuschäfer1-2/+2
To make it easier to find the dma-buf documentation when looking through tables-of-contents etc., put the name "dma-buf" in the title. Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Link: https://lore.kernel.org/r/20230129115917.1229529-1-j.neuschaefer@gmx.net Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2023-01-30gpio: Remove unused and obsoleted irq_to_gpio()Andy Shevchenko1-8/+0
irq_to_gpio() is legacy and unused API, remove it for good. This leaves gpio_to_irq() as it's used yet in many places. Nevertheless, removal of its counterpart is a good signal to whoever even trying to consider using them that do not. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
2023-01-30gpio: Remove unused and obsoleted gpio_export_link()Andy Shevchenko1-9/+0
gpio_export_link() is legacy and unused API, remove it for good. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Yanteng Si <siyanteng@loongson.cn> Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
2023-01-26thermal: intel: int340x: Add production mode attributeSrinivas Pandruvada1-0/+3
It is possible that the system manufacturer locks down thermal tuning beyond what is usually done on the given platform. In that case user space calibration tools should not try to adjust the thermal configuration of the system. To allow user space to check if that is the case, add a new sysfs attribute "production_mode" that will be present when the ACPI DCFG method is present under the INT3400 device object in the ACPI Namespace. Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2023-01-25Docs/driver-api/index: Add missing SPDX License IdentifierSeongJae Park1-0/+2
Add missing SPDX License Identifier for driver-api documentation index file. Signed-off-by: SeongJae Park <sj@kernel.org> Link: https://lore.kernel.org/r/20230122213650.187710-3-sj@kernel.org Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2023-01-25Docs/subsystem-apis: Remove '[The ]Linux' prefixes from titles of listed ↵SeongJae Park1-3/+3
documents Some documents that listed on subsystem-apis have 'Linux' or 'The Linux' title prefixes. It's duplicated information, and makes finding the document of interest with human eyes not easy. Remove the prefixes from the titles. Signed-off-by: SeongJae Park <sj@kernel.org> Acked-by: Iwona Winiarska <iwona.winiarska@intel.com> Acked-by: Bjorn Helgaas <bhelgaas@google.com> Link: https://lore.kernel.org/r/20230122184834.181977-1-sj@kernel.org Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2023-01-23vfio-mdev: remove an non-existing driver from vfio-mediated-deviceChristoph Hellwig1-7/+1
The nvidia mdev driver does not actually exist anywhere in the tree. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Jason Gunthorpe <jgg@nvidia.com> Reviewed-by: Tony Krowiak <akrowiak@linux.ibm.com> Link: https://lore.kernel.org/r/20230110091009.474427-5-hch@lst.de Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2023-01-23vfio-mdev: move the mtty usage documentationChristoph Hellwig1-100/+0
Move the documentation on how to use mtty to samples/vfio-mdev/README.rst as it is in no way related to the vfio API. This matches how the bpf and pktgen samples are documented. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Jason Gunthorpe <jgg@nvidia.com> Link: https://lore.kernel.org/r/20230110091009.474427-4-hch@lst.de Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2023-01-22media: cpia2: remove deprecated driverHans Verkuil2-57/+0
The cpia2 driver does not use the vb2 framework for streaming video, instead it implements this in the driver. This is error prone, and nobody stepped in to convert this driver to that framework. The hardware is very old, so the decision was made to remove it altogether. Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2023-01-22media: Documentation: add multiplexed streams documentationTomi Valkeinen1-0/+8
Add documentation related to multiplexed streams. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2023-01-17pinctrl: Proofreading and updating the documentation (part 2)Bagas Sanjaya1-58/+56
Do the following: - update the "Definitions" style in two sections - don't use "I" for technical documentation - inline the remaining (variables, function names, file paths) Signed-off-by: Bagas Sanjaya <bagasdotme@gmail.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Linus Walleij <linus.walleij@linaro.org>
2023-01-17pinctrl: Proofreading and updating the documentation accordinglyAndy Shevchenko1-212/+202
Proofreading and updating the documentation accordingly, i.e. fixed: - ambiguity of foo_set_mux() implementation and explanations - semantics in some of the examples, e.g. _probe() --> _init() - references to the callbacks to make them start with dot - references to the legacy API by replacing them with newer one - indentation in some of the examples - double words or phrases updated: - unsigned --> unsigned int in some of the examples - use struct pingroup and PINCTRL_PINGROUP() in some of the examples - use struct pinfunction and PINCTRL_PINFUNCTION() in some of the examples and enabled: - syntax highlighting for the examples in the programming languages - chapter references Yet to clarify: - "gpioN" menton for the default function when requesting GPIO Co-developed-by: Bagas Sanjaya <bagasdotme@gmail.com> Signed-off-by: Bagas Sanjaya <bagasdotme@gmail.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Linus Walleij <linus.walleij@linaro.org>
2023-01-12media: davinci: remove vpbe supportArnd Bergmann2-40/+0
The davinci dm3xx/dm644x platforms are gone now, and the remaining da8xx platforms do not use the vpbe driver, so the driver can be removed as well. Acked-by: Lad Prabhakar <prabhakar.csengg@gmail.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2022-12-19Merge tag 'dmaengine-6.2-rc1' of ↵Linus Torvalds1-0/+1
git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine Pull dmaengine updates from Vinod Koul: "New support: - Qualcomm SDM670, SM6115 and SM6375 GPI controller support - Ingenic JZ4755 dmaengine support - Removal of iop-adma driver Updates: - Tegra support for dma-channel-mask - at_hdmac cleanup and virt-chan support for this driver" * tag 'dmaengine-6.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine: (46 commits) dmaengine: Revert "dmaengine: remove s3c24xx driver" dmaengine: tegra: Add support for dma-channel-mask dt-bindings: dmaengine: Add dma-channel-mask to Tegra GPCDMA dmaengine: idxd: Remove linux/msi.h include dt-bindings: dmaengine: qcom: gpi: add compatible for SM6375 dmaengine: idxd: Fix crc_val field for completion record dmaengine: at_hdmac: Convert driver to use virt-dma dmaengine: at_hdmac: Remove unused member of at_dma_chan dmaengine: at_hdmac: Rename "chan_common" to "dma_chan" dmaengine: at_hdmac: Rename "dma_common" to "dma_device" dmaengine: at_hdmac: Use bitfield access macros dmaengine: at_hdmac: Keep register definitions and structures private to at_hdmac.c dmaengine: at_hdmac: Set include entries in alphabetic order dmaengine: at_hdmac: Use pm_ptr() dmaengine: at_hdmac: Use devm_clk_get() dmaengine: at_hdmac: Use devm_platform_ioremap_resource dmaengine: at_hdmac: Use devm_kzalloc() and struct_size() dmaengine: at_hdmac: Introduce atc_get_llis_residue() dmaengine: at_hdmac: s/atc_get_bytes_left/atc_get_residue dmaengine: at_hdmac: Pass residue by address to avoid unnecessary implicit casts ...
2022-12-19Merge tag 'phy-for-6.2' of ↵Linus Torvalds1-1/+24
git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy Pull phy updates from Vinod Koul: "This tme we have again a big pile of qcom-qmp-* changes, one new driver and bunch of new hardware support. New hardware support: - Allwinner H616 USB PHY and A100 DPHY support - TI J721s2, J784s4 and J721e support - Freescale i.MX8MP PCIe PHY support - New driver for Renesas Ethernet SERDES supporting R-Car S4-8 - Qualcomm SM8450 PCIe1 PHY support in EP mode - Qualcomm SC8280XP PCIe PHY support (including x4 mode) - Fixed Qualcomm SC8280XP USB4-USB3-DP PHY DT bindings Updates: - A big pile of updates on qcom-qmp-* drivers following the driver split and reorganization merged earlier - Phy order of API calls documentation update" * tag 'phy-for-6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy: (174 commits) phy: ti: phy-j721e-wiz: add j721s2-wiz-10g module support dt-bindings: phy-j721e-wiz: add j721s2 compatible string phy: use devm_platform_get_and_ioremap_resource() phy: allwinner: phy-sun6i-mipi-dphy: Add the A100 DPHY variant phy: allwinner: phy-sun6i-mipi-dphy: Add a variant power-on hook phy: allwinner: phy-sun6i-mipi-dphy: Set the enable bit last phy: allwinner: phy-sun6i-mipi-dphy: Make RX support optional dt-bindings: sun6i-a31-mipi-dphy: Add the A100 DPHY variant dt-bindings: sun6i-a31-mipi-dphy: Add the interrupts property phy: qcom-qmp-pcie: drop redundant clock allocation phy: qcom-qmp-usb: drop redundant clock allocation phy: qcom-qmp: drop unused type header phy: qcom-qmp-usb: drop sc8280xp reference-clock source dt-bindings: phy: qcom,sc8280xp-qmp-usb3-uni: drop reference-clock source phy: qcom-qmp-combo: add support for updated sc8280xp binding phy: qcom-qmp-combo: rename DP_PHY register pointer phy: qcom-qmp-combo: rename common-register pointers phy: qcom-qmp-combo: clean up DP clock callbacks phy: qcom-qmp-combo: separate clock and provider registration phy: qcom-qmp-combo: add clock registration helper ...
2022-12-16Merge tag 'driver-core-6.2-rc1' of ↵Linus Torvalds1-0/+1
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core Pull driver core updates from Greg KH: "Here is the set of driver core and kernfs changes for 6.2-rc1. The "big" change in here is the addition of a new macro, container_of_const() that will preserve the "const-ness" of a pointer passed into it. The "problem" of the current container_of() macro is that if you pass in a "const *", out of it can comes a non-const pointer unless you specifically ask for it. For many usages, we want to preserve the "const" attribute by using the same call. For a specific example, this series changes the kobj_to_dev() macro to use it, allowing it to be used no matter what the const value is. This prevents every subsystem from having to declare 2 different individual macros (i.e. kobj_const_to_dev() and kobj_to_dev()) and having the compiler enforce the const value at build time, which having 2 macros would not do either. The driver for all of this have been discussions with the Rust kernel developers as to how to properly mark driver core, and kobject, objects as being "non-mutable". The changes to the kobject and driver core in this pull request are the result of that, as there are lots of paths where kobjects and device pointers are not modified at all, so marking them as "const" allows the compiler to enforce this. So, a nice side affect of the Rust development effort has been already to clean up the driver core code to be more obvious about object rules. All of this has been bike-shedded in quite a lot of detail on lkml with different names and implementations resulting in the tiny version we have in here, much better than my original proposal. Lots of subsystem maintainers have acked the changes as well. Other than this change, included in here are smaller stuff like: - kernfs fixes and updates to handle lock contention better - vmlinux.lds.h fixes and updates - sysfs and debugfs documentation updates - device property updates All of these have been in the linux-next tree for quite a while with no problems" * tag 'driver-core-6.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (58 commits) device property: Fix documentation for fwnode_get_next_parent() firmware_loader: fix up to_fw_sysfs() to preserve const usb.h: take advantage of container_of_const() device.h: move kobj_to_dev() to use container_of_const() container_of: add container_of_const() that preserves const-ness of the pointer driver core: fix up missed drivers/s390/char/hmcdrv_dev.c class.devnode() conversion. driver core: fix up missed scsi/cxlflash class.devnode() conversion. driver core: fix up some missing class.devnode() conversions. driver core: make struct class.devnode() take a const * driver core: make struct class.dev_uevent() take a const * cacheinfo: Remove of_node_put() for fw_token device property: Add a blank line in Kconfig of tests device property: Rename goto label to be more precise device property: Move PROPERTY_ENTRY_BOOL() a bit down device property: Get rid of __PROPERTY_ENTRY_ARRAY_EL*SIZE*() kernfs: fix all kernel-doc warnings and multiple typos driver core: pass a const * into of_device_uevent() kobject: kset_uevent_ops: make name() callback take a const * kobject: kset_uevent_ops: make filter() callback take a const * kobject: make kobject_namespace take a const * ...
2022-12-16Merge tag 'tty-6.2-rc1' of ↵Linus Torvalds2-26/+33
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty Pull tty/serial driver updates from Greg KH: "Here is the "big" set of tty/serial driver changes for 6.2-rc1. As in previous kernel releases, nothing big here at all, just some small incremental serial/tty layer cleanups and some individual driver additions and fixes. Highlights are: - serial helper macros from Jiri Slaby to reduce the amount of duplicated code in serial drivers - api cleanups and consolidations from Ilpo Järvinen in lots of serial drivers - the usual set of n_gsm fixes from Daniel Starke as that code gets exercised more - TIOCSTI is finally able to be disabled if requested (security hardening feature from Kees Cook) - fsl_lpuart driver fixes and features added - other small serial driver additions and fixes All of these have been in linux-next for a while with no reported problems" * tag 'tty-6.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (97 commits) serial: atmel: don't stop the transmitter when doing PIO serial: atmel: cleanup atmel_start+stop_tx() tty: serial: fsl_lpuart: switch to new dmaengine_terminate_* API serial: sunsab: Fix error handling in sunsab_init() serial: altera_uart: fix locking in polling mode serial: pch: Fix PCI device refcount leak in pch_request_dma() tty: serial: fsl_lpuart: Use pm_ptr() to avoid need to make pm __maybe_unused tty: serial: fsl_lpuart: Add runtime pm support tty: serial: fsl_lpuart: enable wakeup source for lpuart serdev: Replace poll loop by readx_poll_timeout() macro tty: synclink_gt: unwind actions in error path of net device open serial: stm32: move dma_request_chan() before clk_prepare_enable() dt-bindings: serial: xlnx,opb-uartlite: Drop 'contains' from 'xlnx,use-parity' serial: pl011: Do not clear RX FIFO & RX interrupt in unthrottle. serial: amba-pl011: avoid SBSA UART accessing DMACR register tty: serial: altera_jtaguart: remove struct altera_jtaguart tty: serial: altera_jtaguart: use uart_port::read_status_mask tty: serial: altera_jtaguart: remove unused altera_jtaguart::sigs tty: serial: altera_jtaguart: remove flag from altera_jtaguart_rx_chars() n_tty: Rename tail to old_tail in n_tty_read() ...
2022-12-16Merge tag 'usb-6.2-rc1' of ↵Linus Torvalds1-0/+2
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb Pull USB and Thunderbolt driver updates from Greg KH: "Here is the large set of USB and Thunderbolt driver changes for 6.2-rc1. Overall, thanks to the removal of a driver, more lines were removed than added, a nice change. Highlights include: - removal of the sisusbvga driver that was not used by anyone anymore - minor thunderbolt driver changes and tweaks - chipidea driver updates - usual set of typec driver features and hardware support added - musb minor driver fixes - fotg210 driver fixes, bringing that hardware back from the "dead" - minor dwc3 driver updates - addition, and then removal, of a list.h helper function for many USB and other subsystem drivers, that ended up breaking the build. That will come back for 6.3-rc1, it missed this merge window. - usual xhci updates and enhancements - usb-serial driver updates and support for new devices - other minor USB driver updates All of these have been in linux-next for a while with no reported problems" * tag 'usb-6.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (153 commits) usb: gadget: uvc: Rename bmInterfaceFlags -> bmInterlaceFlags usb: dwc2: power on/off phy for peripheral mode in dual-role mode usb: dwc2: disable lpm feature on Rockchip SoCs dt-bindings: usb: mtk-xhci: add support for mt7986 usb: dwc3: core: defer probe on ulpi_read_id timeout usb: ulpi: defer ulpi_register on ulpi_read_id timeout usb: misc: onboard_usb_hub: add Genesys Logic GL850G hub support dt-bindings: usb: Add binding for Genesys Logic GL850G hub controller dt-bindings: vendor-prefixes: add Genesys Logic usb: fotg210-udc: fix potential memory leak in fotg210_udc_probe() usb: typec: tipd: Set mode of operation for USB Type-C connector usb: gadget: udc: drop obsolete dependencies on COMPILE_TEST usb: musb: remove extra check in musb_gadget_vbus_draw usb: gadget: uvc: Prevent buffer overflow in setup handler usb: dwc3: qcom: Fix memory leak in dwc3_qcom_interconnect_init usb: typec: wusb3801: fix fwnode refcount leak in wusb3801_probe() usb: storage: Add check for kcalloc USB: sisusbvga: use module_usb_driver() USB: sisusbvga: rename sisusb.c to sisusbvga.c USB: sisusbvga: remove console support ...
2022-12-15Merge tag 'gpio-updates-for-v6.2' of ↵Linus Torvalds1-5/+0
git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux Pull gpio updates from Bartosz Golaszewski: "We have a new GPIO multiplexer driver, bunch of driver updates and refactoring in the core GPIO library. GPIO core: - teach gpiolib to work with software nodes for HW description - remove ARCH_NR_GPIOS treewide as we no longer impose any limit on the number of GPIOS since the allocation became entirely dynamic - add support for HW quirks for Cirrus CS42L56 codec, Marvell NFC controller, Freescale PCIe and Ethernet controller, Himax LCDs and Mediatek mt2701 - refactor OF quirk code - some general refactoring of the OF and ACPI code, adding new helpers, minor tweaks and fixes, making fwnode usage consistent etc. GPIO uAPI: - fix an issue where the user-space can trigger a NULL-pointer dereference in the kernel by opening a device file, forcing a driver unbind and then calling one of the syscalls on the associated file descriptor New drivers: - add gpio-latch: a new GPIO multiplexer based on latches connected to other GPIOs Driver updates: - convert i2c GPIO expanders to using .probe_new() - drop the gpio-sta2x11 driver - factor out common code for the ACCES IDIO-16 family of controllers and use this new library wherever applicable in drivers - add DT support to gpio-hisi - allow building gpio-davinci as a module and increase its maxItems property - add support for a new model to gpio-pca9570 - other minor changes to various drivers" * tag 'gpio-updates-for-v6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux: (66 commits) gpio: sim: set a limit on the number of GPIOs gpiolib: protect the GPIO device against being dropped while in use by user-space gpiolib: cdev: fix NULL-pointer dereferences gpiolib: Provide to_gpio_device() helper gpiolib: Unify access to the device properties gpio: Do not include <linux/kernel.h> when not really needed. gpio: pcf857x: Convert to i2c's .probe_new() gpio: pca953x: Convert to i2c's .probe_new() gpio: max732x: Convert to i2c's .probe_new() dt-bindings: gpio: gpio-davinci: Increase maxItems in gpio-line-names gpiolib: ensure that fwnode is properly set gpio: sl28cpld: Replace irqchip mask_invert with unmask_base gpiolib: of: Use correct fwnode for DT-probed chips gpiolib: of: Drop redundant check in of_mm_gpiochip_remove() gpiolib: of: Prepare of_mm_gpiochip_add_data() for fwnode gpiolib: add support for software nodes gpiolib: consolidate GPIO lookups gpiolib: acpi: avoid leaking ACPI details into upper gpiolib layers gpiolib: acpi: teach acpi_find_gpio() to handle data-only nodes gpiolib: acpi: change acpi_find_gpio() to accept firmware node ...
2022-12-14Merge tag 'pinctrl-v6.2-1' of ↵Linus Torvalds1-5/+5
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl Pull pin control updates from Linus Walleij: "The two large chunks is the header clean-up from Andy and the Qualcomm DT bindings clean-up from Krzysztof. Each which could give rise to conflicts, but I haven't seen any. The YAML conversions happening around the device tree is the biggest item in the series and is the result of Rob Herrings ambition to autovalidate these trees against strict schemas and it is paying off in lots of bugs found and ever prettier device trees. Sooner or later the transition will be complete, Krzysztof is fixing up all of the Qualcomm stuff, which is pretty voluminous. Core changes: - minor but nice and important documentation clean-ups New drivers: - subdriver for the Qualcomm SDM670 SoC - subdriver for the Intel Moorefield SoC - trivial support for the NXP Freescale i.MXRT1170 SoC Other changes and improvements - major clean-up of the Qualcomm pin control device tree bindings by Krzysztof - major header clean-up by Andy - some immutable irqchip clean-up for the Actions Semiconductor and Nuvoton drivers - GPIO helpers for The Cypress cy8c95x0 driver - bias handling in the Mediatek MT7986 driver - remove the unused pins-are-numbered concept that never flew" * tag 'pinctrl-v6.2-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (231 commits) pinctrl: thunderbay: fix possible memory leak in thunderbay_build_functions() dt-bindings: pinctrl: st,stm32: Deprecate pins-are-numbered dt-bindings: pinctrl: mediatek,mt65xx: Deprecate pins-are-numbered pinctrl: stm32: Remove check for pins-are-numbered pinctrl: mediatek: common: Remove check for pins-are-numbered pinctrl: qcom: remove duplicate included header files pinctrl: sunxi: d1: Add CAN bus pinmuxes pinctrl: loongson2: Fix some const correctness pinctrl: pinconf-generic: add missing of_node_put() pinctrl: intel: Enumerate PWM device when community has a capability pwm: lpss: Rename pwm_lpss_probe() --> devm_pwm_lpss_probe() pwm: lpss: Allow other drivers to enable PWM LPSS pwm: lpss: Include headers we are the direct user of pwm: lpss: Rename MAX_PWMS --> LPSS_MAX_PWMS pwm: Add a stub for devm_pwmchip_add() pinctrl: k210: call of_node_put() pinctrl: starfive: Use existing variable gpio dt-bindings: pinctrl: semtech,sx150xq: fix match patterns for 16 GPIOs matching pinconf-generic: fix style issues in pin_config_param doc pinctrl: pinctrl-loongson2: fix Kconfig dependency ...
2022-12-13Merge tag 'spi-v6.2' of ↵Linus Torvalds1-2/+2
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi Pull spi updates from Mark Brown: "A busy enough release, but not for the core which has only seen very small updates. The biggest addition is the readdition of support for detailed configuration of the timings around chip selects. That had been removed for lack of use but there's been applications found for it on Atmel systems. Otherwise the updates are mostly feature additions and cleanups to existing drivers. Summary: - Provide a helper for getting device match data in a way that abstracts away which firmware interface is being used. - Re-add the spi_set_cs_timing() API for detailed configuration of the timing around chip select and support it on Atmel. - Support for MediaTek MT7986, Microchip PCI1xxxx, Nuvoton WPCM450 FIU and Socionext F_OSPI" * tag 'spi-v6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: (66 commits) spi: dt-bindings: Convert Synquacer SPI to DT schema spi: spi-gpio: Don't set MOSI as an input if not 3WIRE mode spi: spi-mtk-nor: Add recovery mechanism for dma read timeout spi: spi-fsl-lpspi: add num-cs binding for lpspi spi: spi-fsl-lpspi: support multiple cs for lpspi spi: mtk-snfi: Add snfi support for MT7986 IC spi: spidev: mask SPI_CS_HIGH in SPI_IOC_RD_MODE spi: cadence-quadspi: Add minimum operable clock rate warning to baudrate divisor calculation spi: microchip: pci1xxxx: Add suspend and resume support for PCI1XXXX SPI driver spi: dt-bindings: nuvoton,wpcm450-fiu: Fix warning in example (missing reg property) spi: dt-bindings: nuvoton,wpcm450-fiu: Fix error in example (bogus include) spi: mediatek: Enable irq when pdata is ready spi: spi-mtk-nor: Unify write buffer on/off spi: intel: Add support for SFDP opcode spi: intel: Take possible chip address into account in intel_spi_read/write_reg() spi: intel: Implement adjust_op_size() spi: intel: Use ->replacement_op in intel_spi_hw_cycle() spi: cadence: Drop obsolete dependency on COMPILE_TEST spi: Add Nuvoton WPCM450 Flash Interface Unit (FIU) bindings spi: wpcm-fiu: Add direct map support ...
2022-12-13Merge tag 'regulator-v6.2' of ↵Linus Torvalds1-0/+1
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator Pull regulator updates from Mark Brown: "Quite a quiet release for regulator, the diffstat is dominated by the I2C migration to probe_new() and the newly added MT6357 driver. We've just one framework addition and the rest is all new device support, fixes and cleanups. The framework addition is an API for requesting all regulators defined in DT, this isn't great practice but has reasonable applications when there is generic code handling devices on buses where the bus specification doesn't include power. The immediate application is MDIO but I believe there's others, it's another API that'll need an eye keeping on it for undesirable usage. Summary: - An API for requesting all regulators defined in DT - Conversion of lots of drivers to the I2C probe_new() API - Support for Mediatek MT6357, Qualcomm PM8550, PMR735a and Richtek RT6190" * tag 'regulator-v6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator: (56 commits) regulator: core: Use different devices for resource allocation and DT lookup dt-bindings: Add missing 'unevaluatedProperties' to regulator nodes regulator: qcom-labibb: Fix missing of_node_put() in qcom_labibb_regulator_probe() regulator: add mt6357 regulator regulator: dt-bindings: Add binding schema for mt6357 regulators regulator: core: fix resource leak in regulator_register() regulator: core: fix module refcount leak in set_supply() regulator: core: fix use_count leakage when handling boot-on regulator: rk808: Use dev_err_probe regulator: rk808: reduce 'struct rk808' usage regulator: Drop obsolete dependencies on COMPILE_TEST regulator: pv88080-regulator: Convert to i2c's .probe_new() regulator: pfuze100-regulator: Convert to i2c's .probe_new() regulator: isl6271a-regulator: Convert to i2c's .probe_new() regulator: fan53555: Convert to i2c's .probe_new() regulator: act8865-regulator: Convert to i2c's .probe_new() regulator: qcom-rpmh: Add support for PM8550 regulators regulator: dt-bindings: qcom,rpmh: Add compatible for PM8550 regulator: tps65023-regulator: Convert to i2c's .probe_new() regulator: tps62360-regulator: Convert to i2c's .probe_new() ...
2022-12-13Merge tag 'drm-next-2022-12-13' of git://anongit.freedesktop.org/drm/drmLinus Torvalds1-0/+6
Pull drm updates from Dave Airlie: "The biggest highlight is that the accel subsystem framework is merged. Hopefully for 6.3 we will be able to line up a driver to use it. In drivers land, i915 enables DG2 support by default now, and nouveau has a big stability refactoring and initial ampere support, AMD includes new hw IP support and should build on ARM again. There is also an ofdrm driver to take over offb on platforms it's used. Stuff outside my tree, the dma-buf patches hit a few places, the vc4 firmware changes also do, and i915 has some interactions with MEI for discrete GPUs. I think all of those should have been acked/reviewed by relevant parties. New driver: - ofdrm - replacement for offb fbdev: - add support for nomodeset fourcc: - add Vivante tiled modifier core: - atomic-helpers: CRTC primary plane test fixes, fb access hooks - connector: TV API consistency, cmdline parser improvements - send connector hotplug on cleanup - sort makefile objects tests: - sort kunit tests - improve DP-MST tests - add kunit helpers to create a device sched: - module param for scheduling policy - refcounting fix buddy: - add back random seed log ttm: - convert ttm_resource to size_t - optimize pool allocations edid: - HFVSDB parsing support fixes - logging/debug improvements - DSC quirks dma-buf: - Add unlocked vmap and attachment mapping - move drivers to common locking convention - locking improvements firmware: - new API for rPI firmware and vc4 xilinx: - zynqmp: displayport bridge support - dpsub fix bridge: - adv7533: Remove dynamic lane switching - it6505: Runtime PM support, sync improvements - ps8640: Handle AUX defer messages - tc358775: Drop soft-reset over I2C panel: - panel-edp: Add INX N116BGE-EA2 C2 and C4 support. - Jadard JD9365DA-H3 - NewVision NV3051D amdgpu: - DCN support on ARM - DCN 2.1 secure display - Sienna Cichlid mode2 reset fixes - new GC 11.x firmware versions - drop AMD specific DSC workarounds in favour of drm code - clang warning fixes - scheduler rework - SR-IOV fixes - GPUVM locking fixes - fix memory leak in CS IOCTL error path - flexible array updates - enable new GC/PSP/SMU/NBIO IP - GFX preemption support for gfx9 amdkfd: - cache size fixes - userptr fixes - enable cooperative launch on gfx 10.3 - enable GC 11.0.4 KFD support radeon: - replace kmap with kmap_local_page - ACPI ref count fix - HDA audio notifier support i915: - DG2 enabled by default - MTL enablement work - hotplug refactoring - VBT improvements - Display and watermark refactoring - ADL-P workaround - temp disable runtime_pm for discrete- - fix for A380 as a secondary GPU - Wa_18017747507 for DG2 - CS timestamp support fixes for gen5 and earlier - never purge busy TTM objects - use i915_sg_dma_sizes for all backends - demote GuC kernel contexts to normal priority - gvt: refactor for new MDEV interface - enable DC power states on eDP ports - fix gen 2/3 workarounds nouveau: - fix page fault handling - Ampere acceleration support - driver stability improvements - nva3 backlight support msm: - MSM_INFO_GET_FLAGS support - DPU: XR30 and P010 image formats - Qualcomm SM6115 support - DSI PHY support for QCM2290 - HDMI: refactored dev init path - remove exclusive-fence hack - fix speed-bin detection - enable clamp to idle on 7c3 - improved hangcheck detection vmwgfx: - fb and cursor refactoring - convert to generic hashtable - cursor improvements etnaviv: - hw workarounds - softpin MMU fixes ast: - atomic gamma LUT support - convert to SHMEM lcdif: - support YUV planes - Increase DMA burst size - FIFO threshold tuning meson: - fix return type of cvbs mode_valid mgag200: - fix PLL setup on some revisions sun4i: - A100 and D1 support udl: - modesetting improvements - hot unplug support vc4: - support PAL-M - fix regression preventing 4K @ 60Hz - fix NULL ptr deref v3d: - switch to drm managed resources renesas: - RZ/G2L DSI support - DU Kconfig cleanup mediatek: - fixup dpi and hdmi - MT8188 dpi support - MT8195 AFBC support tegra: - NVDEC hardware on Tegra234 SoC hdlcd: - switch to drm managed resources ingenic: - fix registration error path hisilicon: - convert to drm_mode_init maildp: - use managed resources mtk: - use drm_mode_init rockchip: - use drm_mode_copy" * tag 'drm-next-2022-12-13' of git://anongit.freedesktop.org/drm/drm: (1397 commits) drm/amdgpu: fix mmhub register base coding error drm/amdgpu: add tmz support for GC IP v11.0.4 drm/amdgpu: enable GFX Clock Gating control for GC IP v11.0.4 drm/amdgpu: enable GFX Power Gating for GC IP v11.0.4 drm/amdgpu: enable GFX IP v11.0.4 CG support drm/amdgpu: Make amdgpu_ring_mux functions as static drm/amdgpu: generally allow over-commit during BO allocation drm/amd/display: fix array index out of bound error in DCN32 DML drm/amd/display: 3.2.215 drm/amd/display: set optimized required for comp buf changes drm/amd/display: Add debug option to skip PSR CRTC disable drm/amd/display: correct DML calc error of UrgentLatency drm/amd/display: correct static_screen_event_mask drm/amd/display: Ensure commit_streams returns the DC return code drm/amd/display: read invalid ddc pin status cause engine busy drm/amd/display: Bypass DET swath fill check for max clocks drm/amd/display: Disable uclk pstate for subvp pipes drm/amd/display: Fix DCN2.1 default DSC clocks drm/amd/display: Enable dp_hdmi21_pcon support drm/amd/display: prevent seamless boot on displays that don't have the preferred dig ...
2022-12-13Merge tag 'docs-6.2' of git://git.lwn.net/linuxLinus Torvalds2-1/+9
Pull documentation updates from Jonathan Corbet: "This was a not-too-busy cycle for documentation; highlights include: - The beginnings of a set of translations into Spanish, headed up by Carlos Bilbao - More Chinese translations - A change to the Sphinx "alabaster" theme by default for HTML generation. Unlike the previous default (Read the Docs), alabaster is shipped with Sphinx by default, reducing the number of other dependencies that need to be installed. It also (IMO) produces a cleaner and more readable result. - The ability to render the documentation into the texinfo format (something Sphinx could always do, we just never wired it up until now) Plus the usual collection of typo fixes, build-warning fixes, and minor updates" * tag 'docs-6.2' of git://git.lwn.net/linux: (67 commits) Documentation/features: Use loongarch instead of loong Documentation/features-refresh.sh: Only sed the beginning "arch" of ARCH_DIR docs/zh_CN: Fix '.. only::' directive's expression docs/sp_SP: Add memory-barriers.txt Spanish translation docs/zh_CN/LoongArch: Update links of LoongArch ISA Vol1 and ELF psABI docs/LoongArch: Update links of LoongArch ISA Vol1 and ELF psABI Documentation/features: Update feature lists for 6.1 Documentation: Fixed a typo in bootconfig.rst docs/sp_SP: Add process coding-style translation docs/sp_SP: Add kernel-docs.rst Spanish translation docs: Create translations/sp_SP/process/, move submitting-patches.rst docs: Add book to process/kernel-docs.rst docs: Retire old resources from kernel-docs.rst docs: Update maintainer of kernel-docs.rst Documentation: riscv: Document the sv57 VM layout Documentation: USB: correct possessive "its" usage math64: fix kernel-doc return value warnings math64: add kernel-doc for DIV64_U64_ROUND_UP math64: favor kernel-doc from header files doc: add texinfodocs and infodocs targets ...
2022-11-25Merge tag 'v6.1-rc4' into spi-6.2Mark Brown3-7/+16
Linux 6.1-rc4 which should get my CI working on RPi3s again.
2022-11-25Merge tag 'v6.1-rc4' into regulator-6.2Mark Brown3-7/+16
Linux 6.1-rc4 which should get my CI working on RPi3s again.
generated by cgit v1.2.3 (git 2.39.0) at 2024-07-27 03:20:40 +0300