summaryrefslogtreecommitdiff
path: root/Documentation/hwmon
AgeCommit message (Collapse)AuthorFilesLines
2015-04-05hwmon: (it87) Add support for IT8620EGuenter Roeck1-3/+10
IT8620E is mostly compatible to IT7828F. Add generic support for it. IT8620E supports up to 6 fan tachometers and 6 pwm controls. Support for the 6th tachometer and for the additional pwm controls are addded in separate patches. Reviewed-by: Jean Delvare <jdelvare@suse.de> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2015-04-05hwmon: (it87) Add support for IT8790EGuenter Roeck1-3/+10
IT8790E is a super-IO chip with three fan tachometers. It is mostly compatible to IT8728F, but only supports three fan tachometers instead of five. Reviewed-by: Jean Delvare <jdelvare@suse.de> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2015-03-09hwmon: Add Nuvoton NCT7904 hwmon driverVadim V. Vlasov1-0/+60
The NCT7904D is a hardware monitor supporting up to 20 voltage sensors, internal temperature sensor, Intel PECI and AMD SB-TSI CPU temperature interface, up to 12 fan tachometer inputs, up to 4 fan control channels with SmartFan. Signed-off-by: Vadim V. Vlasov <vvlasov@dev.rtsoft.ru> [Guenter Roeck: Fixed whitespace errors, dropped redundant comment] Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2015-03-09hwmon: (it87) Add support for IT8786EThomas Lorblanches1-1/+5
IT8786E is mostly compatible with IT8771 / IT8772. Parameters determined by testing various combinations. Reviewed-by: Jean Delvare <jdelvare@suse.de> Signed-off-by: Thomas Lorblanches <zlika_ese@hotmail.com> [Guenter Roeck: merged from github, addressed review comments] Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2015-03-09hwmon: (jc42) Add support for additional IDT temperature sensorsGuenter Roeck1-5/+3
TS3000GB0 has a new device ID (0x2913). Since IDT's datasheets suggest that the upper 8 bit of the device ID reflect the chip ID and the lower 8 bit reflect the version number, modify the code to accept all chips with ID 0x29xx. Also add support for TS3001 and TSE2004. Some of the datasheets for older chips are no longer available from the IDT web site, so replace explicit links in the documentation with a generic note. Reviewed-by: Jean Delvare <jdelvare@suse.de> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2015-03-09hwmon: (it87) Add support for IT8781FGuenter Roeck1-9/+13
IT8781F is mostly compatible to IT8782F. Major difference is that it only supports four instead of six UART channels, and therefore does not share the uart6 pins. Reviewed-by: Jean Delvare <jdelvare@suse.de> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2015-01-26hwmon: (ina2xx) Add ina231 compatible stringKevin Hilman1-2/+9
Add support for "ina231" as compatible string, and update Documentation and Kconfig accordingly. Tested with the Exynos5422-based odroid-xu3 board which has on-board INA231 sensors. Signed-off-by: Kevin Hilman <khilman@linaro.org> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2015-01-26hwmon: (ina2xx) implement update_interval attribute for ina226Bartosz Golaszewski1-0/+7
This attribute allows to configure the update interval of ina226. Although the bus and shunt voltage conversion times remain hardcoded to 1.1 ms, we can now modify said interval by changing the averaging rate. While we're at it - add an additional variable to ina2xx_data, which holds the current configuration settings - this way we'll be able to restore the configuration in case of an unexpected chip reset. Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2015-01-26hwmon: (ina2xx) make shunt resistance configurable at run-timeBartosz Golaszewski1-2/+3
The shunt resistance can only be set via platform_data or device tree. This isn't suitable for devices in which the shunt resistance can change/isn't known at boot-time. Add a sysfs attribute that allows to read and set the shunt resistance. Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2014-12-08hwmon: (tmp401) Detect TMP435 on all addresses it supportsGuenter Roeck1-1/+1
TMP435 supports a range of I2C addresses, not just 0x4c. Cc: Patrick Titiano <ptitiano@baylibre.com> Cc: Bartosz Golaszewski <bgolaszewski@baylibre.com> Reviewed-by: Jean Delvare <jdelvare@suse.de> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2014-12-04hwmon: (tmp401) Add support for TI TMP435Patrick Titiano1-2/+6
Signed-off-by: Patrick Titiano <ptitiano@baylibre.com> [Bartosz Golaszewski: prepared for submission, code review fixes] Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> [Guenter Roeck: Merged two patches into one] Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2014-12-02hwmon: (lm95234) Add support for LM95233Guenter Roeck1-5/+10
LM95233 is similar to LM95234, but it only supports two instead of four external temperature sensors. Reviewed-by: Jean Delvare <jdelvare@suse.de> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2014-12-02hwmon: (lm95245) Add support for LM95235Guenter Roeck1-5/+9
LM95235 is register compatible to LM95245. Also update link to LM95245 data sheet, and drop the link to the datasheet from the driver source to simplify code maintenance. Reviewed-by: Jean Delvare <jdelvare@suse.de> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2014-12-01hwmon: (nct6775) Add support for NCT6792DGuenter Roeck1-0/+4
NCT6792D is similar to NCT6791D. Only beep control and temperature monitoring registers are different. Reviewed-by: Jean Delvare <jdelvare@suse.de> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2014-12-01hwmon: (nct6775) Documentation updatesGuenter Roeck1-1/+9
Document support for NCT6102D/NCT6104D/NCT6106D and NCT6791D. Document that NCT5573D is compatible to NCT6775F with the same chip ID. Reviewed-by: Jean Delvare <jdelvare@suse.de> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2014-12-01hwmon: (lm75) Add support for the NXP LM75BMichael Thalmeier1-0/+5
It is basically a faster lm75 with improved (11 bit) resolution. Signed-off-by: Michael Thalmeier <michael.thalmeier@hale.at> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2014-12-01hwmon: Driver for Nuvoton NCT7802YGuenter Roeck1-0/+32
NCT7802Y is an I2C based hardware monitoring chip from Nuvoton. Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2014-09-24Merge tag 'mfd-hwmon-leds-watchdog-v3.18' into hwmon-nextGuenter Roeck1-0/+50
Immutable branch between MFD, HWMON, LEDs and Watchdog for v3.18
2014-09-24hwmon: (menf21bmc) Introduce MEN14F021P00 BMC HWMON driverAndreas Werner1-0/+50
Added driver to support the 14F021P00 BMC Hardware Monitoring. The BMC is a Board Management Controller including monitoring of the board voltages. Signed-off-by: Andreas Werner <andreas.werner@men.de> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-09-22hwmon: (k10temp) Add support for F15h M60hAravind Gopalakrishnan1-1/+1
This patch adds temperature monitoring support for F15h M60h processor. - Add new pci device id for the relevant processor - The functionality of REG_REPORTED_TEMPERATURE is moved to D0F0xBC_xD820_0CA4 [Reported Temperature Control] - So, use this to get CUR_TEMP value - Since we need an indirect register access, protect this with a mutex lock - Add Kconfig, Doc entries to indicate support for this processor. Signed-off-by: Aravind Gopalakrishnan <aravind.gopalakrishnan@amd.com> Acked-by: Borislav Petkov <bp@suse.de> Acked-by: Clemens Ladisch <clemens@ladisch.de> [Guenter Roeck: Declare new mutex and function static] Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2014-08-04hwmon: Add pwm-fan driverKamil Debski1-0/+17
The pwm-fan driver enables control of fans connected to PWM lines. This driver uses the PWM framework, so it is compatible with all PWM devices that provide drivers through the PWM framework. Signed-off-by: Kamil Debski <k.debski@samsung.com> Reviewed-by: Varka Bhadram <varkabhadram@gmail.com> Reviewed-by: Tobias Klauser <tklauser@distanz.ch> [Guenter Roeck: Last argument to devm_of_pwm_get is pointer, use NULL] Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2014-08-04hwmon: (powerpc/powernv) hwmon driver for power, fan rpm, voltage and ↵Neelesh Gupta1-0/+41
temperature This patch adds basic kernel support for reading power values, fan speed rpm, voltage and temperature data on powernv platforms which will be exported to user space through sysfs interface. Test results: ------------- [root@tul163p1 ~]# sensors ibmpowernv-isa-0000 Adapter: ISA adapter fan1: 5465 RPM (min = 0 RPM) fan2: 5152 RPM (min = 0 RPM) fan3: 5521 RPM (min = 0 RPM) fan4: 4891 RPM (min = 0 RPM) fan5: 0 RPM (min = 0 RPM) fan6: 0 RPM (min = 0 RPM) fan7: 7480 RPM (min = 0 RPM) fan8: 7944 RPM (min = 0 RPM) temp1: +39.0°C (high = +0.0°C) power1: 190.00 W [root@tul163p1 ~]# ls /sys/devices/platform/ alarmtimer ibmpowernv.0 power rtc-generic serial8250 uevent [root@tul163p1 ~]# ls /sys/devices/platform/ibmpowernv.0/hwmon/hwmon0/ device fan2_min fan4_min fan6_min fan8_min power fan1_fault fan3_fault fan5_fault fan7_fault in1_fault power1_input fan1_input fan3_input fan5_input fan7_input in2_fault subsystem fan1_min fan3_min fan5_min fan7_min in3_fault temp1_input fan2_fault fan4_fault fan6_fault fan8_fault in4_fault temp1_max fan2_input fan4_input fan6_input fan8_input name uevent [root@tul163p1 ~]# ls /sys/class/hwmon/hwmon0/ device fan2_min fan4_min fan6_min fan8_min power fan1_fault fan3_fault fan5_fault fan7_fault in1_fault power1_input fan1_input fan3_input fan5_input fan7_input in2_fault subsystem fan1_min fan3_min fan5_min fan7_min in3_fault temp1_input fan2_fault fan4_fault fan6_fault fan8_fault in4_fault temp1_max fan2_input fan4_input fan6_input fan8_input name uevent [root@tul163p1 ~]# Signed-off-by: Neelesh Gupta <neelegup@linux.vnet.ibm.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2014-08-04hwmon: (pmbus) Add tps40422 front-end driverZhu, Richard \(NSN - CN/Beijing\)2-3/+66
For TI power management chip TPS40422, READ_TEMPERATURE_2 command is supported on page 1 of the chip, but the original driver(pmbus.c) only tried to detect this command on page 0, this will lead to a result that the temperature sensor in page 1 couldn't be detected. This change is to isolate the tps40422 driver from pmbus.c into a solo front-end driver. Signed-off-by: Zhu Laiwen <richard.zhu@nsn.com> [Guenter Roeck: Dropped unnecessary license text (fixes checkpatch warning)] Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2014-08-04hwmon: (tmp421) Add support for TMP441 and TMP442Guenter Roeck1-7/+15
TMP441 and TMP442 are compatible to TMP421 and TMP422. Signed-off-by: Guenter Roeck <linux@roeck-us.net> Reviewed-by: Jean Delvare <jdelvare@suse.de>
2014-08-04hwmon: (tmp421) Strengthen detect functionGuenter Roeck1-2/+2
Not all supported chips support the entire I2C address range. Only accept specific chips at the addresses supported by that chip. Check for invalid values in conversion rate and status registers. Signed-off-by: Guenter Roeck <linux@roeck-us.net> Reviewed-by: Jean Delvare <jdelvare@suse.de>
2014-08-04hwmon: (ntc_thermistor) Support B57330V2103 from EPCOSJohannes Pointner1-0/+5
This patch adds support for the ntc thermistor B57330V2103 from EPCOS. Signed-off-by: Johannes Pointner <johannes.pointner@gmail.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2014-08-04hwmon: (lm75) Add support for TMP112Frans Klaver1-2/+3
TMP112 is compatible to LM75. Signed-off-by: Frans Klaver <frans.klaver@xsens.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2014-08-04hwmon: Driver for TI TMP103 temperature sensorHeiko Schocher1-0/+28
Driver for the TI TMP103. The TI TMP103 is similar to the TMP102. It differs from the TMP102 by having only 8 bit registers. Signed-off-by: Heiko Schocher <hs@denx.de> [linux@roeck-us.net: Select REGMAP_I2C in Kconfig] Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2014-08-04hwmon: Add support for Lattice's POWR1220 power manager ICScott Kanowitz1-0/+45
This patch adds support for Lattice's POWR1220 power manager IC. Read access to all the ADCs on the chip are supported through the hwmon sysfs files. Signed-off-by: Scott Kanowitz <skanowitz@echo360.com> [Guenter Roeck: Removed some extra ( )] Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2014-06-25hwmon: (ntc_thermistor) Use the manufacturer name properlyNaveen Krishna Chatradhi1-4/+4
Murata Manufacturing Co., Ltd is the vendor for NTC (Negative Temperature coefficient) based Thermistors. But, the driver extensively uses "NTC" as the vendor name. This patch corrects the vendor name also updates the compatibility strings according to the vendor-prefix.txt Note: Drivers continue to support the previous compatible strings but further addition of these compatible strings in device tree is deprecated. Signed-off-by: Naveen Krishna Chatradhi <ch.naveen@samsung.com> Reviewed-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2014-06-12hwmon: add support for Sensirion SHTC1 sensorTomas Pop1-0/+43
Add support for Sensirion SHTC1 and compatible temperature and humidity sensors. Signed-off-by: Tomas Pop <tomas.pop@sensirion.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2014-06-03Merge tag 'hwmon-for-linus' of ↵Linus Torvalds5-8/+251
git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging into next Pull hwmon updates from Guenter Roeck: "New driver for NCT6683D New chip support to existing drivers: - add support for STTS2004 and AT30TSE004 to jc42 driver - add support for EMC1402/EMC1412/EMC1422 to emc1403 driver Other notable changes: - document hwmon kernel API - convert jc42, lm70, lm75, lm77, lm83, lm92, max1619, tmp421, and tmp102 drivers to use new hwmon API functions - replace function macros in lm80, lm92, and jc42 drivers with real code - convert emc1403 driver to use regmap, add support for additional attributes, and add device IDs for EMC1412, EMC1413, and EMC1414 - various additional cleanup and minor bug fixes in several drivers" * tag 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: (60 commits) hwmon: (nct6775) Fix probe unwind paths to properly unregister platform devices hwmon: (nct6683) Fix probe unwind paths to properly unregister platform devices hwmon: (ultra45_env) Introduce managed version of kzalloc hwmon: Driver for NCT6683D hwmon: (lm80) Rearrange code to avoid forward declarations hwmon: (lm80) Convert fan display function macros into functions hwmon: (lm80) Convert voltage display function macros into functions hwmon: (lm80) Convert temperature display function macros into functions hwmon: (lm80) Normalize all temperature values to 16 bit hwmon: (lm80) Simplify TEMP_FROM_REG hwmon: (lm83) Convert to use devm_hwmon_device_register_with_groups hwmon: (lm83) Rearange code to avoid forward declarations hwmon: (lm83) Drop FSF address hwmon: (max1619) Convert to use devm_hwmon_device_register_with_groups hwmon: (max1619) Drop function macros hwmon: (max1619) Rearrange code to avoid forward declarations hwmon: (max1619) Drop FSF address hwmon: (max1619) Fix critical alarm display hwmon: (jc42) Add support for STTS2004 and AT30TSE004 hwmon: (jc42) Convert function macros into functions ...
2014-05-25hwmon: Document temp[1-*]_min_hyst sysfs attributeJean Delvare1-0/+14
The temp[1-*]_min_hyst sysfs attribute is already implemented by 3 hwmon drivers (adt7x10, lm77 and lm92) but was missing from the standard interface. Also add temp[1-*]_lcrit_hyst for consistency, even though no driver implement that one for the time being. Signed-off-by: Jean Delvare <jdelvare@suse.de> Reviewed-by: Guenter Roeck <linux@roeck-us.net>
2014-05-22hwmon: Driver for NCT6683DGuenter Roeck1-0/+57
Nuvoton NCT6683D is an eSIO with hardware monitoring capabilities. Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2014-05-22hwmon: (jc42) Add support for STTS2004 and AT30TSE004Guenter Roeck1-6/+10
Also fix links to datasheets for other supported sensors from ST Microelectronics, and add links to several Atmel datasheets. Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2014-05-22hwmon: (emc1403) Make all hyst attributes except for temp1_crit_hyst read-onlyGuenter Roeck1-2/+5
All chips in this chip series only support a single hysteresis value. Having multiple writable hysteresis attributes is therefore confusing, since a single write affects all hysteresis temperatures. Make all but one (temp1_crit_hyst) read-only. Reviewed-by: Jean Delvare <jdelvare@suse.de> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2014-05-22hwmon: (emc1403) Add driver documentationGuenter Roeck1-0/+56
With the driver now supporting several chip variants, it is about time to document what is supported. Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2014-05-22hwmon: Document hwmon kernel APIGuenter Roeck1-0/+107
The hwmon subsystem has been around for a while. Time to document its kernel API. Acked-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2014-05-22hwmon: (lm77) Do not preserve hysteresis when updating critical temp limitGuenter Roeck1-2/+18
Updating the hysteresis value when updating the critical temperature limit was following the rule of 'least surprise'. However, it had the undesirable side effect of changing the hysteresis for all other attributes, which defeats the purpose of least surprise. In addition, it could result in invalid hysteresis values if the resulting hysteresis was too large. In such cases the resulting hysteresis ended up changed anyway, which again defeats the purpose. So drop that code and document the new behavior. Reviewed-by: Jean Delvare <jdelvare@suse.de> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2014-04-06Merge branch 'hwmon-for-linus' of ↵Linus Torvalds1-5/+5
git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging Pull hwmon updates from Jean Delvare: "This includes a number of driver conversions to devm_hwmon_device_register_with_groups, a few cleanups, and support for the ITE IT8623E" * 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging: hwmon: (it87) Add support for IT8623E hwmon: (it87) Fix IT8603E define name hwmon: (lm90) Convert to use hwmon_device_register_with_groups hwmon: (lm90) Create all sysfs groups in one call hwmon: (lm90) Always use the dev variable in the probe function hwmon: (lm90) Create most optional attributes with sysfs_create_group hwmon: Avoid initializing the same field twice hwmon: (pc87360) Avoid initializing the same field twice hwmon: (lm80) Convert to use devm_hwmon_device_register_with_groups hwmon: (adm1021) Convert to use devm_hwmon_device_register_with_groups hwmon: (lm63) Avoid initializing the same field twice hwmon: (lm63) Convert to use devm_hwmon_device_register_with_groups hwmon: (lm63) Create all sysfs groups in one call hwmon: (lm63) Introduce 'dev' variable to point to client->dev hwmon: (lm63) Add additional sysfs group for temp2_type attribute hwmon: (f71805f) Fix author's address
2014-04-04hwmon: (it87) Add support for IT8623ERudolf Marek1-5/+5
Add support for the IT8623E found on Asus motherboards. It has same hardware monitoring block as IT8603E. Signed-off-by: Rudolf Marek <r.marek@assembler.cz> Signed-off-by: Jean Delvare <jdelvare@suse.de>
2014-04-03hwmon: (k10temp) Add support for AMD F16 M30h processorAravind Gopalakrishnan1-3/+3
Adding new PCI ID to support AMD F16 M30h processor (Mullins). While at it, modify Kconfig and Doc files to reflect the support for newer processors Note: PCI ID for this processor will make it into pci_ids.h as part of this patch: http://marc.info/?l=linux-kernel&m=139291362126057&w=2 which should be pulled into 3.15 when merge window opens (It currently sits in 'for-next' branch of bp.git- https://git.kernel.org/cgit/linux/kernel/git/bp/bp.git/log/?h=for-next) Signed-off-by: Aravind Gopalakrishnan <Aravind.Gopalakrishnan@amd.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2014-03-20hwmon: (pmbus/ltc2978) Add support for LTM4676Guenter Roeck1-6/+11
The chip's programming interface is quite similar to LTC3880 and supports the same set of sensors. Reviewed-by: Robert Coulson <rob.coulson@gmail.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2014-03-03hwmon: (lm95245) Make temp2_crit_hyst read-onlyGuenter Roeck1-2/+6
The hysteresis register is shared among both temperature sensors. This means changing one also affects the other. To avoid confusion, established way to express this is to make only the first instance writable and keep all other instances as read-only. Otherwise users may be confused that changing the second writable value also affects the first, while it is more obvious that a writable value may affect a different read-only value. Signed-off-by: Guenter Roeck <linux@roeck-us.net> Reviewed-by: Jean Delvare <jdelvare@suse.de>
2014-03-03hwmon: Driver for TI ADC128D818Guenter Roeck1-0/+47
ADC128D818 is a System Monitor with Temperature Sensor. It is similar to LM80 and LM96080, but has 16 bit wide sensor registers and no fan speed monitoring. Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2014-03-03hwmon: Driver for Linear Technologies LTC2945Guenter Roeck1-0/+84
LTC2945 is a system monitor that measures current, voltage, and power. Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2014-03-03hwmon: Driver for Linear Technologies LTC4260Guenter Roeck1-0/+56
LTC4260 is a Positive Voltage Hot Swap Controller. The driver currently only supports voltage monitoring, not voltage control. Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2014-01-29Update Jean Delvare's e-mail addressJean Delvare23-23/+23
Signed-off-by: Jean Delvare <khali@linux-fr.org>
2014-01-29hwmon: (it87) Add support for the ITE IT8603ERudolf Marek1-8/+19
Add support for IT8603E. This closes bug #57861: https://bugzilla.kernel.org/show_bug.cgi?id=57861 [JD: Fixes and clean-ups.] Signed-off-by: Rudolf Marek <r.marek@assembler.cz> Signed-off-by: Jean Delvare <khali@linux-fr.org>
2013-11-16Merge branch 'hwmon-for-linus' of ↵Linus Torvalds1-0/+6
git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging Pull hwmon fixes and updates from Jean Delvare: "All lm90 driver fixes and improvements" * 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging: Documentation: dt: hwmon: Add OF document for LM90 hwmon: (lm90) Add power control hwmon: (lm90) Add support for TI TMP451 hwmon: (lm90) Use enums for the indexes of temp8 and temp11 hwmon: (lm90) Add support to handle IRQ hwmon: (lm90) Define status bits hwmon: (lm90) Fix max6696 alarm handling