Age | Commit message (Collapse) | Author | Files | Lines |
|
... cannot be used in block quote, it breaks compilation, remove it.
Fix warnings due to missing blank line such as:
net-next/Documentation/networking/nf_flowtable.rst:142: WARNING: Block quote ends without a blank line; unexpected unindent.
Fixes: 143490cde566 ("docs: nf_flowtable: update documentation with enhancements")
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This patch updates the flowtable documentation to describe recent
enhancements:
- Offload action is available after the first packets go through the
classic forwarding path.
- IPv4 and IPv6 are supported. Only TCP and UDP layer 4 are supported at
this stage.
- Tuple has been augmented to track VLAN id and PPPoE session id.
- Bridge and IP forwarding integration, including bridge VLAN filtering
support.
- Hardware offload support.
- Describe the [OFFLOAD] and [HW_OFFLOAD] tags in the conntrack table
listing.
- Replace 'flow offload' by 'flow add' in example rulesets (preferred
syntax).
- Describe existing cache limitations.
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
s/subsytem/subsystem/
Signed-off-by: Bhaskar Chowdhury <unixbhaskar@gmail.com>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
automatically
Since commit 9d5ef190e561 ("net: dsa: automatically bring up DSA master
when opening user port"), DSA manages the administrative status of the
host port automatically. Update the configuration steps to reflect this.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
"make htmldocs" complains:
configuration.rst:165: WARNING: duplicate label networking/dsa/configuration:single port, other instance in (...)
configuration.rst:212: WARNING: duplicate label networking/dsa/configuration:bridge, other instance in (...)
configuration.rst:252: WARNING: duplicate label networking/dsa/configuration:gateway, other instance in (...)
And for good reason, because the "single port", "bridge" and "gateway"
use cases are replicated twice, once for normal taggers and twice for
DSA_TAG_PROTO_NONE. So when trying to reference these sections via a
hyperlink such as:
https://www.kernel.org/doc/html/latest/networking/dsa/configuration.html#single-port
it will always reference the first occurrence, and never the second one.
This change makes the "single port", "bridge" and "gateway"
configuration examples consistent with the formatting used in the
"Configuration showcases" subsection.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
"make htmldocs" produces these warnings:
Documentation/networking/dsa/dsa.rst:468: WARNING: Unexpected indentation.
Documentation/networking/dsa/dsa.rst:477: WARNING: Block quote ends without a blank line; unexpected unindent.
Fixes: 8411abbcad8e ("Documentation: networking: dsa: mention integration with devlink")
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Even though this is clear from the context, it is nice to actually be
grammatically correct.
Fixes: 0f22ad45f47c ("Documentation: networking: switchdev: clarify device driver behavior")
Reported-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
It looks like "make htmldocs" produces this warning:
Documentation/networking/switchdev.rst:482: WARNING: Unexpected indentation.
Fixes: 0f22ad45f47c ("Documentation: networking: switchdev: clarify device driver behavior")
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The "bridge fdb add" command provided in the switchdev documentation is
junk now, not only because it is syntactically incorrect and rejected by
the iproute2 bridge program, but also because it was not updated in
light of Arkadi Sharshevsky's radical switchdev refactoring in commit
29ab586c3d83 ("net: switchdev: Remove bridge bypass support from
switchdev"). Try to explain what the intended usage pattern is with the
new kernel implementation.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This patch provides details on the expected behavior of switchdev
enabled network devices when operating in a "stand alone" mode, as well
as when being bridge members. This clarifies a number of things that
recently came up during a bug fixing session on the b53 DSA switch
driver.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add a short summary of the methods that a driver writer must implement
for offloading a HSR/PRP network interface.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: George McCollister <george.mccollister@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add a short summary of the methods that a driver writer must implement
for getting an MRP instance to work on top of a DSA switch.
Cc: Horatiu Vultur <horatiu.vultur@microchip.com>
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add a short summary of the methods that a driver writer must implement
for offloading a link aggregation group, and what is still missing.
Cc: Tobias Waldekranz <tobias@waldekranz.com>
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Tobias Waldekranz <tobias@waldekranz.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add a short summary of the devlink features supported by the DSA core.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The documentation was already lagging behind by not mentioning the old
version of port_bridge_flags (port_set_egress_floods). So now we are
skipping one step and just explaining how a DSA driver should configure
address learning and flooding settings.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
On one hand, the link is dead and therefore useless.
On the other hand, there are always more drivers to port, but at this
stage, DSA does not need to affirm itself as the driver model to use for
Ethernet-connected switches (since we already have 15 tagging protocols
supported and probably more switch families from various vendors), so
there is nothing actionable to do.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
After the recent series containing commit bae33f2b5afe ("net: switchdev:
remove the transaction structure from port attributes"), there aren't
prepare/commit transactional phases anymore in most of the switchdev
objects/attributes, and as a result, there aren't any in the DSA driver
API either. So remove this piece.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
After Vivien's series from 2019 containing commits 27d4d19d7c82 ("net:
dsa: remove limitation of switch index value") and ab8ccae122a4 ("net:
dsa: add ports list in the switch fabric"), this is basically no longer
true.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The chapter about tagging protocols is out of date because it doesn't
mention all taggers that have been added since last documentation
update. But judging based on that, it will always tend to lag behind,
and there's no good reason why we would enumerate the supported
hardware. Instead we could do something more useful and explain what
there is to know about tagging protocols instead.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Tobias Waldekranz <tobias@waldekranz.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
While preparing some slides for a customer presentation, I found the
existing high-level view to be a bit confusing, so I modified it a
little bit.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Tobias Waldekranz <tobias@waldekranz.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The ena.rst documentation referred to end_start_xmit() when it should refer
to ena_start_xmit(). Fix the typo.
Signed-off-by: Zenghui Yu <yuzenghui@huawei.com>
Acked-by: Shay Agroskin <shayagr@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The batching logic in netvsc_send is non-trivial, due to
a combination of the Linux API and the underlying hypervisor
interface. Add a comment explaining why the code is written this
way.
Signed-off-by: Shachar Raindel <shacharr@microsoft.com>
Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
Reviewed-by: Dexuan Cui <decui@microsoft.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Documentation is missing and it's not very clear what
this callback is for - presumably testing the recovery?
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Minor tweaks and improvement of wording about the diagnose callback.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This commit fixes three spelling typos in devlink-dpipe.rst and
devlink-port.rst.
Signed-off-by: Eva Dengler <eva.dengler@fau.de>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
"either" is outside the parentheses, so the matching "or" should be too.
Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Following the recent update to MAINTAINERS update my e-mail address.
Signed-off-by: Maciej W. Rozycki <macro@orcam.me.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Leave it to Greg.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This patch fixes a spelling typo in bonding.rst.
Signed-off-by: Masanari Iida <standby24x7@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging
Pull staging and IIO driver updates from Greg KH:
"Here is the "big" set of staging and IIO driver patches for 5.12-rc1.
Nothing really huge in here, the number of staging tree patches has
gone down for a bit, maybe there's only so much churn to happen in
here at the moment.
The IIO changes are:
- new drivers
- new DT bindings
- new iio driver features
with full details in the shortlog.
The staging driver patches are just a lot of tiny coding style
cleanups, along with some semi-larger hikey driver cleanups as those
are _almost_ good enough to get out of the staging tree, but will
probably have to wait until 5.13 to have happen.
All of these have been in linux-next with no reported issues"
* tag 'staging-5.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (189 commits)
staging: hikey9xx: Fix alignment of function parameters
staging: greybus: Fixed a misspelling in hid.c
staging: wimax/i2400m: fix some byte order issues found by sparse
staging: wimax: i2400m: fix some incorrect type warnings
staging: greybus: minor code style fix
staging:wlan-ng: use memdup_user instead of kmalloc/copy_from_user
staging:r8188eu: use IEEE80211_FCTL_* kernel definitions
staging: rtl8192e: remove multiple blank lines
staging: greybus: Fixed alignment issue in hid.c
staging: wfx: remove unused included header files
staging: nvec: minor coding style fix
staging: wimax: Fix some coding style problem
staging: fbtft: add tearing signal detect
staging: vt6656: Fixed issue with alignment in rf.c
staging: qlge: Remove duplicate word in comment
staging: rtl8723bs: remove obsolete commented out code
staging: rtl8723bs: fix function comments to follow kernel-doc
staging: wfx: avoid defining array of flexible struct
staging: rtl8723bs: Replace one-element array with flexible-array member in struct ndis_80211_var_ie
staging: Replace lkml.org links with lore
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull tty/serial driver updates from Greg KH:
"Here is the big set of tty/serial driver changes for 5.12-rc1.
Nothing huge, just lots of good cleanups and additions:
- n_tty line discipline cleanups
- vt core cleanups and reworks to make the code more "modern"
- stm32 driver additions
- tty led support added to the tty core and led layer
- minor serial driver fixups and additions
All of these have been in linux-next for a while with no reported
issues"
* tag 'tty-5.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (54 commits)
serial: core: Remove BUG_ON(in_interrupt()) check
vt_ioctl: Remove in_interrupt() check
dt-bindings: serial: imx: Switch to my personal address
vt: keyboard, use new API for keyboard_tasklet
serial: stm32: improve platform_get_irq condition handling in init_port
serial: ifx6x60: Remove driver for deprecated platform
tty: fix up iterate_tty_read() EOVERFLOW handling
tty: fix up hung_up_tty_read() conversion
tty: fix up hung_up_tty_write() conversion
tty: teach the n_tty ICANON case about the new "cookie continuations" too
tty: teach n_tty line discipline about the new "cookie continuations"
tty: clean up legacy leftovers from n_tty line discipline
tty: implement read_iter
tty: convert tty_ldisc_ops 'read()' function to take a kernel pointer
serial: remove sirf prima/atlas driver
serial: mxs-auart: Remove <asm/cacheflush.h>
serial: mxs-auart: Remove serial_mxs_probe_dt()
serial: fsl_lpuart: Use of_device_get_match_data()
dt-bindings: serial: renesas,hscif: Add r8a779a0 support
tty: serial: Drop unused efm32 serial driver
...
|
|
We have no in-tree users, also update the sfp-phylink.rst documentation
to indicate that phy_attach_direct() is used instead of of_phy_attach().
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
|
|
Add 5GBASE-R phy interface mode
Signed-off-by: Pavana Sharma <pavana.sharma@digi.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Marek Behún <kabel@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Daniel Borkmann says:
====================
pull-request: bpf-next 2021-02-16
The following pull-request contains BPF updates for your *net-next* tree.
There's a small merge conflict between 7eeba1706eba ("tcp: Add receive timestamp
support for receive zerocopy.") from net-next tree and 9cacf81f8161 ("bpf: Remove
extra lock_sock for TCP_ZEROCOPY_RECEIVE") from bpf-next tree. Resolve as follows:
[...]
lock_sock(sk);
err = tcp_zerocopy_receive(sk, &zc, &tss);
err = BPF_CGROUP_RUN_PROG_GETSOCKOPT_KERN(sk, level, optname,
&zc, &len, err);
release_sock(sk);
[...]
We've added 116 non-merge commits during the last 27 day(s) which contain
a total of 156 files changed, 5662 insertions(+), 1489 deletions(-).
The main changes are:
1) Adds support of pointers to types with known size among global function
args to overcome the limit on max # of allowed args, from Dmitrii Banshchikov.
2) Add bpf_iter for task_vma which can be used to generate information similar
to /proc/pid/maps, from Song Liu.
3) Enable bpf_{g,s}etsockopt() from all sock_addr related program hooks. Allow
rewriting bind user ports from BPF side below the ip_unprivileged_port_start
range, both from Stanislav Fomichev.
4) Prevent recursion on fentry/fexit & sleepable programs and allow map-in-map
as well as per-cpu maps for the latter, from Alexei Starovoitov.
5) Add selftest script to run BPF CI locally. Also enable BPF ringbuffer
for sleepable programs, both from KP Singh.
6) Extend verifier to enable variable offset read/write access to the BPF
program stack, from Andrei Matei.
7) Improve tc & XDP MTU handling and add a new bpf_check_mtu() helper to
query device MTU from programs, from Jesper Dangaard Brouer.
8) Allow bpf_get_socket_cookie() helper also be called from [sleepable] BPF
tracing programs, from Florent Revest.
9) Extend x86 JIT to pad JMPs with NOPs for helping image to converge when
otherwise too many passes are required, from Gary Lin.
10) Verifier fixes on atomics with BPF_FETCH as well as function-by-function
verification both related to zero-extension handling, from Ilya Leoshkevich.
11) Better kernel build integration of resolve_btfids tool, from Jiri Olsa.
12) Batch of AF_XDP selftest cleanups and small performance improvement
for libbpf's xsk map redirect for newer kernels, from Björn Töpel.
13) Follow-up BPF doc and verifier improvements around atomics with
BPF_FETCH, from Brendan Jackman.
14) Permit zero-sized data sections e.g. if ELF .rodata section contains
read-only data from local variables, from Yonghong Song.
15) veth driver skb bulk-allocation for ndo_xdp_xmit, from Lorenzo Bianconi.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Some internal PHY's have their events like link change reported by the
MAC interrupt. We have PHY_IGNORE_INTERRUPT to deal with this scenario.
I'm not too happy with this name. We don't ignore interrupts, typically
there is no interrupt exposed at a PHY level. So let's rename it to
PHY_MAC_INTERRUPT. This is in line with phy_mac_interrupt(), which is
called from the MAC interrupt handler to handle PHY events.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Based on [1], BPF_CMPXCHG should always load the old value into R0. The
phrasing in bpf.rst is somewhat ambiguous in this regard, improve it to
make this aspect crystal clear.
[1] https://lore.kernel.org/bpf/CAADnVQJFcFwxEz=wnV=hkie-EDwa8s5JGbBQeFt1TGux1OihJw@mail.gmail.com/
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20210210142853.82203-1-iii@linux.ibm.com
|
|
J721e, J7200 and AM64 have multi port switches which can work in multi
mac mode and in switch mode. Add documentation explaining how to use
different modes.
Borrowed from:
Documentation/networking/device_drivers/ethernet/ti/cpsw_switchdev.rst
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
AM65 NUSS ethernet switch on K3 devices can be configured to work either
in independent mac mode where each port acts as independent network
interface (multi mac) or switch mode.
Add devlink hooks to provide a way to switch b/w these modes.
Rationale to use devlink instead of defaulting to bridge mode is that
SoC use cases require to support multiple independent MAC ports with no
switching so that users can use software bridges with multi-mac
configuration (e.g: to support LAG, HSR/PRP, etc). Also, switching
between multi mac and switch mode requires significant Port and ALE
reconfiguration, therefore is easier to be made as part of mode change
devlink hooks. It also allows to keep user interface similar to what
was implemented for the previous generation of TI CPSW IP
(on AM33/AM43/AM57 SoCs).
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux
Saeed Mahameed says:
====================
mlx5-for-upstream-2021-02-10
Misc cleanups and trivial fixes for net-next
1) spelling mistakes
2) error path checks fixes
3) unused includes and struct fields cleanup
4) build error when MLX5_ESWITCH=no
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
tcp_rmem[1] has been changed to 131072, we should update the documentation
to reflect this.
Fixes: a337531b942b ("tcp: up initial rmem to 128KB and SYN rwin to around 64KB")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: Zhibin Liu <zhibinliu@google.com>
Cc: Yuchung Cheng <ycheng@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add support for offloading of HSR/PRP (IEC 62439-3) tag insertion
tag removal, duplicate generation and forwarding.
For HSR, insertion involves the switch adding a 6 byte HSR header after
the 14 byte Ethernet header. For PRP it adds a 6 byte trailer.
Tag removal involves automatically stripping the HSR/PRP header/trailer
in the switch. This is possible when the switch also performs auto
deduplication using the HSR/PRP header/trailer (making it no longer
required).
Forwarding involves automatically forwarding between redundant ports in
an HSR. This is crucial because delay is accumulated as a frame passes
through each node in the ring.
Duplication involves the switch automatically sending a single frame
from the CPU port to both redundant ports. This is required because the
inserted HSR/PRP header/trailer must contain the same sequence number
on the frames sent out both redundant ports.
Export is_hsr_master so DSA can tell them apart from other devices in
dsa_slave_changeupper.
Signed-off-by: George McCollister <george.mccollister@gmail.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Point out where patchwork bot's code lives, and that we don't want
people posting stuff that doesn't build.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Commit 142d93d12dc1 ("net/mlx5: Add devlink subfunction port
documentation") refers to a section 'mlx5 port function' in the table of
contents, but includes a section 'mlx5 function attributes' instead.
Hence, make htmldocs warns:
mlx5.rst:16: WARNING: Unknown target name: "mlx5 port function".
Correct the section reference in table of contents to the actual name of
section in the documentation.
Also, tune another section underline while visiting this document.
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Reviewed-by: Parav Pandit <parav@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue
Tony Nguyen says:
====================
100GbE Intel Wired LAN Driver Updates 2021-02-08
This series contains updates to the ice driver and documentation.
Brett adds a log message when a trusted VF goes in and out of promiscuous
for consistency with i40e driver.
Dave implements a new LLDP command that allows adding VSI destinations to
existing filters and adds support for netdev bonding events, current
support is software based.
Michal refactors code to move from VSI stored xsk_buff_pools to
netdev-provided ones.
Kiran implements the creation scheduler aggregator nodes and distributing
VSIs within the nodes.
Ben modifies rate limit calculations to use clock frequency from the
hardware instead of using a hardcoded one.
Jesse adds support for user to control writeback frequency.
Chinh refactors DCB variables out of the ice_port_info struct.
Bruce removes some unnecessary casting.
Mitch fixes an error message that was reported as if_up instead of if_down.
Tony adjusts fallback allocation for MSI-X to use all given vectors instead
of using only the minimum configuration and updates documentation for
the ice driver.
====================
Reviewed-by: Alexander Duyck <alexanderduyck@fb.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Provide documentation for src_valid_mark sysctl, which was added
in commit 28f6aeea3f12 ("net: restore ip source validation").
Signed-off-by: Jay Vosburgh <jay.vosburgh@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add the value '2' to 'fib_notify_on_flag_change' to allow sending
notifications only for failed route installation.
Separate value is added for such notifications because there are less of
them, so they do not impact performance and some users will find them more
important.
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add the value '2' to 'fib_notify_on_flag_change' to allow sending
notifications only for failed route installation.
Separate value is added for such notifications because there are less of
them, so they do not impact performance and some users will find them more
important.
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The ice documentation has not been updated since the initial commits of the
driver. Update the documentation with features and information that are now
available.
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|