summaryrefslogtreecommitdiff
path: root/Documentation/powerpc
AgeCommit message (Collapse)AuthorFilesLines
2010-10-23Merge git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6Linus Torvalds1-0/+22
* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6: (141 commits) USB: mct_u232: fix broken close USB: gadget: amd5536udc.c: fix error path USB: imx21-hcd - fix off by one resource size calculation usb: gadget: fix Kconfig warning usb: r8a66597-udc: Add processing when USB was removed. mxc_udc: add workaround for ENGcm09152 for i.MX35 USB: ftdi_sio: add device ids for ScienceScope USB: musb: AM35x: Workaround for fifo read issue USB: musb: add musb support for AM35x USB: AM35x: Add musb support usb: Fix linker errors with CONFIG_PM=n USB: ohci-sh - use resource_size instead of defining its own resource_len macro USB: isp1362-hcd - use resource_size instead of defining its own resource_len macro USB: isp116x-hcd - use resource_size instead of defining its own resource_len macro USB: xhci: Fix compile error when CONFIG_PM=n USB: accept some invalid ep0-maxpacket values USB: xHCI: PCI power management implementation USB: xHCI: bus power management implementation USB: xHCI: port remote wakeup implementation USB: xHCI: port power management implementation ... Manually fix up (non-data) conflict: the SCSI merge gad renamed the 'hw_sector_size' member to 'physical_block_size', and the USB tree brought a new use of it.
2010-10-22USB: add USB EHCI support for MPC5121 SoCAnatolij Gustschin1-0/+22
Extends FSL EHCI platform driver glue layer to support MPC5121 USB controllers. MPC5121 Rev 2.0 silicon EHCI registers are in big endian format. The appropriate flags are set using the information in the platform data structure. MPC83xx system interface registers are not available on MPC512x, so the access to these registers is isolated in MPC512x case. Furthermore the USB controller clocks must be enabled before 512x register accesses which is done by providing platform specific init callback. The MPC512x internal USB PHY doesn't provide supply voltage. For boards using different power switches allow specifying DRVVBUS and PWR_FAULT signal polarity of the MPC5121 internal PHY using "fsl,invert-drvvbus" and "fsl,invert-pwr-fault" properties in the device tree USB nodes. Adds documentation for this new device tree bindings. Signed-off-by: Anatolij Gustschin <agust@denx.de> Cc: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-10-13powerpc/of: add eSPI controller dts bindings and DTS modificationMingkai Hu1-1/+23
Also modifiy the document of cell-index in SPI controller. Add the SPI flash(s25fl128p01) support on p4080ds and mpc8536ds board. Signed-off-by: Mingkai Hu <Mingkai.hu@freescale.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2010-08-20Documentation: fix ozlabs.org mailing list addressStephen Rothwell1-1/+1
This list moved to lists.ozlabs.org quite some time ago. Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-08-17booting-without-of: Remove nonexistent chapters from TOC, fix numberingAnton Vorontsov1-29/+2
Marvell and GPIO bindings live in their own files, so the TOC should not mention them. Also fix chapters numbering. Signed-off-by: Anton Vorontsov <avorontsov@mvista.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2010-08-11dts: add sdhci,auto-cmd12 field for p4080 device treeRoy Zang1-0/+2
Signed-off-by: Roy Zang <tie-fei.zang@freescale.com> Cc: Jerry Huang <Chang-Ming.Huang@freescale.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Kumar Gala <galak@gate.crashing.org> Cc: Grant Likely <grant.likely@secretlab.ca> Cc: <linux-mmc@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-08-05Merge branch 'next' of ↵Linus Torvalds2-2/+20
git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc * 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: (79 commits) powerpc/8xx: Add support for the MPC8xx based boards from TQC powerpc/85xx: Introduce support for the Freescale P1022DS reference board powerpc/85xx: Adding DTS for the STx GP3-SSA MPC8555 board powerpc/85xx: Change deprecated binding for 85xx-based boards powerpc/tqm85xx: add a quirk for ti1520 PCMCIA bridge powerpc/tqm85xx: update PCI interrupt-map attribute powerpc/mpc8308rdb: support for MPC8308RDB board from Freescale powerpc/fsl_pci: add quirk for mpc8308 pcie bridge powerpc/85xx: Cleanup QE initialization for MPC85xxMDS boards powerpc/85xx: Fix booting for P1021MDS boards powerpc/85xx: Fix SWIOTLB initalization for MPC85xxMDS boards powerpc/85xx: kexec for SMP 85xx BookE systems powerpc/5200/i2c: improve i2c bus error recovery of/xilinxfb: update tft compatible versions powerpc/fsl-diu-fb: Support setting display mode using EDID powerpc/5121: doc/dts-bindings: update doc of FSL DIU bindings powerpc/5121: shared DIU framebuffer support powerpc/5121: move fsl-diu-fb.h to include/linux powerpc/5121: fsl-diu-fb: fix issue with re-enabling DIU area descriptor powerpc/512x: add clock structure for Video-IN (VIU) unit ...
2010-08-04Documentation: update broken web addresses.Justin P. Mattock1-1/+1
Below you will find an updated version from the original series bunching all patches into one big patch updating broken web addresses that are located in Documentation/* Some of the addresses date as far far back as 1995 etc... so searching became a bit difficult, the best way to deal with these is to use web.archive.org to locate these addresses that are outdated. Now there are also some addresses pointing to .spec files some are located, but some(after searching on the companies site)where still no where to be found. In this case I just changed the address to the company site this way the users can contact the company and they can locate them for the users. Signed-off-by: Justin P. Mattock <justinmattock@gmail.com> Signed-off-by: Thomas Weber <weber@corscience.de> Signed-off-by: Mike Frysinger <vapier.adi@gmail.com> Cc: Paulo Marques <pmarques@grupopie.com> Cc: Randy Dunlap <rdunlap@xenotime.net> Cc: Michael Neuling <mikey@neuling.org> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-08-02powerpc/5200/i2c: improve i2c bus error recoveryAlbrecht Dreß1-0/+2
This patch improves the recovery of the MPC's I2C bus from errors like bus hangs resulting in timeouts: 1. make the bus timeout configurable, as it depends on the bus clock and the attached slave chip(s); default is still 1 second; 2. detect any of the cases indicated by the CF, BB and RXAK MSR flags if a timeout occurs, and add a missing (required) MAL reset; 3. use a more reliable method to fixup the bus if a hang has been detected. The sequence is sent 9 times which seems to be necessary if a slave "misses" more than one clock cycle. For 400 kHz bus speed, the fixup is also ~70us (81us vs. 150us) faster. Tested on a custom Lite5200b derived board, with a Dallas RTC, AD sensors and NXP IO expander chips attached to the i2c. Changes vs. v1: - use improved bus fixup sequence for all chips (not only the 5200) - calculate real clock from defaults if no clock is given in the device tree - better description (I hope) of the changes. I didn't split the changes in this file into three parts as recommended by Grant, as they actually belong together (i.e. they address one single problem, just in three places of one single source file). Signed-off-by: Albrecht Dreß <albrecht.dress@arcor.de> [grant.likely@secretlab.ca: fixup for ->node to ->dev.of_node transition] Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2010-08-02powerpc/fsl-diu-fb: Support setting display mode using EDIDAnatolij Gustschin1-0/+6
Adds support for encoding display mode information in the device tree using verbatim EDID block. If the EDID entry in the DIU node is present, the driver will build mode database using EDID data and allow setting the display modes from this database. Otherwise display mode will be set using mode entries from driver's internal database as usual. This patch also updates device tree bindings. Signed-off-by: Anatolij Gustschin <agust@denx.de> Acked-by: Timur Tabi <timur@freescale.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2010-08-02powerpc/5121: doc/dts-bindings: update doc of FSL DIU bindingsAnatolij Gustschin1-2/+12
Update compatible and interrupt properties description. Furthermore an example for the MPC5121 has been added. Signed-off-by: Anatolij Gustschin <agust@denx.de> Acked-by: Timur Tabi <timur@freescale.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2010-05-21Merge branch 'next' of ↵Linus Torvalds2-1/+39
git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc * 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: (92 commits) powerpc: Remove unused 'protect4gb' boot parameter powerpc: Build-in e1000e for pseries & ppc64_defconfig powerpc/pseries: Make request_ras_irqs() available to other pseries code powerpc/numa: Use ibm,architecture-vec-5 to detect form 1 affinity powerpc/numa: Set a smaller value for RECLAIM_DISTANCE to enable zone reclaim powerpc: Use smt_snooze_delay=-1 to always busy loop powerpc: Remove check of ibm,smt-snooze-delay OF property powerpc/kdump: Fix race in kdump shutdown powerpc/kexec: Fix race in kexec shutdown powerpc/kexec: Speedup kexec hash PTE tear down powerpc/pseries: Add hcall to read 4 ptes at a time in real mode powerpc: Use more accurate limit for first segment memory allocations powerpc/kdump: Use chip->shutdown to disable IRQs powerpc/kdump: CPUs assume the context of the oopsing CPU powerpc/crashdump: Do not fail on NULL pointer dereferencing powerpc/eeh: Fix oops when probing in early boot powerpc/pci: Check devices status property when scanning OF tree powerpc/vio: Switch VIO Bus PM to use generic helpers powerpc: Avoid bad relocations in iSeries code powerpc: Use common cpu_die (fixes SMP+SUSPEND build) ...
2010-05-17powerpc: Add interrupt support to mpc8xxx_gpioPeter Korsgaard1-1/+21
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk> Acked-by: Anton Vorontsov <avorontsov@ru.mvista.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2010-05-05powerpc/4xx: Add optional "reset_type" property to control reboot via dtsStefan Roese1-0/+18
By setting "reset_type" to one of the following values, the default software reset mechanism may be overidden. Here the possible values of "reset_type": 1 - PPC4xx core reset 2 - PPC4xx chip reset 3 - PPC4xx system reset (default) This will be used by a new PPC440SPe board port, which needs a "chip reset" instead of the default "system reset" to be asserted. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Josh Boyer <jwboyer@linux.vnet.ibm.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Acked-by: Josh Boyer <jwboyer@linux.vnet.ibm.com> Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
2010-04-23Documentation/: it's -> its where appropriateFrancis Galiegue2-2/+2
Fix obvious cases of "it's" being used when "its" was meant. Signed-off-by: Francis Galiegue <fgaliegue@gmail.com> Acked-by: Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-04-23Merge branch 'master' into for-nextJiri Kosina1-0/+54
2010-03-29Fix comment and Kconfig typos for 'require' and 'fragment'Gilles Espinasse1-1/+1
Signed-off-by: Gilles Espinasse <g.esp@free.fr> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-03-27powerpc/fsl: add device tree binding for QE firmwareTimur Tabi1-0/+54
Define a binding for embedding a QE firmware blob into the device tree. Also define a new property for the QE node that links to a firmware node. Signed-off-by: Timur Tabi <timur@freescale.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2010-03-08powerpc: doc/dts-bindings: update doc of FSL I2C bindingsWolfgang Grandegger1-8/+22
This patch adds the MPC5121 to the list of supported devices, enhances the doc of the "clock-frequency" property and removes the obsolete "cell-index", "device_type" and "fsl-i2c" property. Furthermore an example for the MPC5121 has been added. Signed-off-by: Wolfgang Grandegger <wg@denx.de> Reviewed-by: Wolfram Sang <w.sang@pengutronix.de> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2010-03-04Merge branch 'next' of ↵Linus Torvalds1-0/+8
git://git.kernel.org/pub/scm/linux/kernel/git/djbw/async_tx * 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/djbw/async_tx: (28 commits) ioat: cleanup ->timer_fn() and ->cleanup_fn() prototypes ioat3: interrupt coalescing ioat: close potential BUG_ON race in the descriptor cleanup path ioat2: kill pending flag ioat3: use ioat2_quiesce() ioat3: cleanup, don't enable DCA completion writes DMAENGINE: COH 901 318 lli sg offset fix DMAENGINE: COH 901 318 configure channel direction DMAENGINE: COH 901 318 remove irq counting DMAENGINE: COH 901 318 descriptor pool refactoring DMAENGINE: COH 901 318 cleanups dma: Add MPC512x DMA driver Debugging options for the DMA engine subsystem iop-adma: redundant/wrong tests in iop_*_count()? dmatest: fix handling of an even number of xor_sources dmatest: correct raid6 PQ test fsldma: Fix cookie issues fsldma: Fix cookie issues dma: cases IPU_PIX_FMT_BGRA32, BGR32 and ABGR32 are the same in ipu_ch_param_set_size() dma: make Open Firmware device id constant ...
2010-03-01Merge branch 'master' of /home/davem/src/GIT/linux-2.6/David S. Miller3-0/+211
Conflicts: drivers/firmware/iscsi_ibft.c
2010-02-19Merge commit 'gcl/next' into nextBenjamin Herrenschmidt2-0/+77
2010-02-17powerpc/of: added documentation for spi chipselectsErnst Schwab1-0/+7
Added devicetree binding documentation for gpios used as chipselect. The code to evaluate these is already present in spi_mpc8xxx.c. Signed-off-by: Ernst Schwab <eschwab@online.de> Reviewed-by: Wolfram Sang <w.sang@pengutronix.de> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2010-02-17powerpc: doc/dts-bindings: document mpc5121 psc uart dts-bindingsAnatolij Gustschin1-0/+70
Support for MPC5121 PSC UART in the mpc52xx_uart driver added new DTS properties for FSL MPC5121 PSC FIFO Controller. Provide documentation of the new properties and some examples. Signed-off-by: Anatolij Gustschin <agust@denx.de> Acked-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2010-02-17powerpc: Extended ptrace interfaceDave Kleikamp1-0/+134
powerpc: Extended ptrace interface From: Dave Kleikamp <shaggy@linux.vnet.ibm.com> Based on patches originally written by Torez Smith. Add a new extended ptrace interface so that user-space has a single interface for powerpc, without having to know the specific layout of the debug registers. Implement: PPC_PTRACE_GETHWDEBUGINFO PPC_PTRACE_SETHWDEBUG PPC_PTRACE_DELHWDEBUG Signed-off-by: Dave Kleikamp <shaggy@linux.vnet.ibm.com> Acked-by: David Gibson <dwg@au1.ibm.com> Cc: Torez Smith <lnxtorez@linux.vnet.ibm.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Josh Boyer <jwboyer@linux.vnet.ibm.com> Cc: Kumar Gala <galak@kernel.crashing.org> Cc: Sergio Durigan Junior <sergiodj@br.ibm.com> Cc: Thiago Jung Bauermann <bauerman@br.ibm.com> Cc: linuxppc-dev list <Linuxppc-dev@ozlabs.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2010-02-03fsldma: simplify IRQ probing and handlingIra Snyder1-0/+8
The IRQ probing is needlessly complex. All off the 83xx device trees in arch/powerpc/boot/dts/ specify 5 interrupts per DMA controller: one for the controller, and one for each channel. These interrupts are all attached to the same IRQ line. This causes an interesting situation if two channels interrupt at the same time. The per-controller handler will handle the first channel, and the per-channel handler will handle the remaining channels. Instead of this mess, we fix the bug in the per-controller handler, and make it handle all channels that generated an interrupt. When a per-controller handler is specified in the device tree, we prefer to use the shared handler instead of the per-channel handler. The 85xx/86xx controllers do not have a per-controller interrupt, and instead use a per-channel interrupt. This behavior has not been changed. Signed-off-by: Ira W. Snyder <iws@ovro.caltech.edu> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2010-01-08powerpc/mpc5xxx: add OF platform binding doc for FSL MSCAN devicesWolfgang Grandegger2-8/+54
This patch adds documentation for the MSCAN OF device bindings for the MPC512x and moves the one for the MPC5200 to the new common file "Documentation/powerpc/dts-bindings/fsl/can.txt". Signed-off-by: Wolfgang Grandegger <wg@denx.de> Reviewed-by: Wolfram Sang <w.sang@pengutronix.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-12-21Merge commit 'kumar/next' into mergeBenjamin Herrenschmidt1-0/+42
2009-12-17Merge branch 'next' of git://git.secretlab.ca/git/linux-2.6Linus Torvalds2-0/+293
* 'next' of git://git.secretlab.ca/git/linux-2.6: (23 commits) powerpc: fix up for mmu_mapin_ram api change powerpc: wii: allow ioremap within the memory hole powerpc: allow ioremap within reserved memory regions wii: use both mem1 and mem2 as ram wii: bootwrapper: add fixup to calc useable mem2 powerpc: gamecube/wii: early debugging using usbgecko powerpc: reserve fixmap entries for early debug powerpc: wii: default config powerpc: wii: platform support powerpc: wii: hollywood interrupt controller support powerpc: broadway processor support powerpc: wii: bootwrapper bits powerpc: wii: device tree powerpc: gamecube: default config powerpc: gamecube: platform support powerpc: gamecube/wii: flipper interrupt controller support powerpc: gamecube/wii: udbg support for usbgecko powerpc: gamecube/wii: do not include PCI support powerpc: gamecube/wii: declare as non-coherent platforms powerpc: gamecube/wii: introduce GAMECUBE_COMMON ... Fix up conflicts in arch/powerpc/mm/fsl_booke_mmu.c. Hopefully even close to correctly.
2009-12-16Merge branch 'next' of ↵Linus Torvalds1-0/+93
git://git.kernel.org/pub/scm/linux/kernel/git/djbw/async_tx * 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/djbw/async_tx: ppc440spe-adma: adds updated ppc440spe adma driver iop-adma.c: use resource_size() dmaengine: clarify the meaning of the DMA_CTRL_ACK flag sh: stylistic improvements for the DMA driver dmaengine: fix dmatest to verify minimum transfer length and test buffer size sh: DMA driver has to specify its alignment requirements Add COH 901 318 DMA block driver v5
2009-12-13powerpc: wii: device treeAlbert Herranz1-0/+184
Add a device tree source file for the Nintendo Wii video game console. Signed-off-by: Albert Herranz <albert_herranz@yahoo.es> Acked-by: Segher Boessenkool <segher@kernel.crashing.org> Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2009-12-13powerpc: gamecube: device treeAlbert Herranz1-0/+109
Add a device tree source file for the Nintendo GameCube video game console. Signed-off-by: Albert Herranz <albert_herranz@yahoo.es> Acked-by: Segher Boessenkool <segher@kernel.crashing.org> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2009-12-13Merge branch 'next' of ↵Linus Torvalds2-1/+20
git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc * 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: (151 commits) powerpc: Fix usage of 64-bit instruction in 32-bit altivec code MAINTAINERS: Add PowerPC patterns powerpc/pseries: Track previous CPPR values to correctly EOI interrupts powerpc/pseries: Correct pseries/dlpar.c build break without CONFIG_SMP powerpc: Make "intspec" pointers in irq_host->xlate() const powerpc/8xx: DTLB Miss cleanup powerpc/8xx: Remove DIRTY pte handling in DTLB Error. powerpc/8xx: Start using dcbX instructions in various copy routines powerpc/8xx: Restore _PAGE_WRITETHRU powerpc/8xx: Add missing Guarded setting in DTLB Error. powerpc/8xx: Fixup DAR from buggy dcbX instructions. powerpc/8xx: Tag DAR with 0x00f0 to catch buggy instructions. powerpc/8xx: Update TLB asm so it behaves as linux mm expects. powerpc/8xx: Invalidate non present TLBs powerpc/pseries: Serialize cpu hotplug operations during deactivate Vs deallocate pseries/pseries: Add code to online/offline CPUs of a DLPAR node powerpc: stop_this_cpu: remove the cpu from the online map. powerpc/pseries: Add kernel based CPU DLPAR handling sysfs/cpu: Add probe/release files powerpc/pseries: Kernel DLPAR Infrastructure ...
2009-12-12ppc440spe-adma: adds updated ppc440spe adma driverAnatolij Gustschin1-0/+93
This patch adds new version of the PPC440SPe ADMA driver. Signed-off-by: Yuri Tikhonov <yur@emcraft.com> Signed-off-by: Anatolij Gustschin <agust@denx.de> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2009-12-11USB: Add support for Xilinx USB host controllerJulie Zhu1-0/+11
Add bus glue driver for Xilinx USB host controller. The controller can be configured as HS only or HS/FS hybrid. The driver uses the device tree file to configure the driver according to the setting in the hardware system. This driver has been tested with usbtest using the NET2280 PCI card. Signed-off-by: Julie Zhu <julie.zhu@xilinx.com> Signed-off-by: John Linn <john.linn@xilinx.com> Acked-by: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-12-09powerpc/fsl: try to explain why the interrupt numbers are off by 16Sebastian Andrzej Siewior1-0/+42
Signed-off-by: Sebastian Andrzej Siewior <sebastian@breakpoint.cc> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-12-09Merge commit 'origin/master' into nextBenjamin Herrenschmidt1-0/+10
Conflicts: include/linux/kvm.h
2009-12-09Merge commit 'gcl/next' into nextBenjamin Herrenschmidt1-1/+16
2009-11-17net/can/mpc52xx_can: improve properties and their descriptionWolfram Sang1-4/+5
Signed-off-by: Wolfram Sang <w.sang@pengutronix.de> Cc: devicetree-discuss@ozlabs.org Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-14net/can: add driver for mscan family & mpc52xx_mscanWolfram Sang1-0/+9
Taken from socketcan-svn, fixed remaining todos, cleaned up, tested with a phyCORE-MPC5200B-IO and a custom board. Signed-off-by: Wolfram Sang <w.sang@pengutronix.de> Cc: Wolfgang Grandegger <wg@grandegger.com> Cc: Grant Likely <grant.likely@secretlab.ca> Cc: David Miller <davem@davemloft.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-13mpc52xx/wdt: OF property to enable the WDT on bootAlbrecht Dreß1-1/+16
Add the "fsl,wdt-on-boot" OF property as to reserve a GPT as WDT which may be a requirement in safety-related (e.g. ISO/EN 61508) applications. Signed-off-by: Albrecht Dreß <albrecht.dress@arcor.de> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2009-11-12powerpc/86xx: Add power management support for MPC8610HPCD boardsAnton Vorontsov1-0/+4
This patch adds needed nodes and properties to support suspend/resume on the MPC8610HPCD boards. There is a dedicated switch (SW9) that is used to wake up the boards. By default the SW9 button is routed to IRQ8, but could be re-routed (via PIXIS) to sreset. With 'no_console_suspend' kernel command line argument specified, the board is also able to wakeup upon serial port input. Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Acked-by: Scott Wood <scottwood@freescale.com> [dts] Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-09-23Merge git://git.infradead.org/mtd-2.6Linus Torvalds1-16/+26
* git://git.infradead.org/mtd-2.6: (58 commits) mtd: jedec_probe: add PSD4256G6V id mtd: OneNand support for Nomadik 8815 SoC (on NHK8815 board) mtd: nand: driver for Nomadik 8815 SoC (on NHK8815 board) m25p80: Add Spansion S25FL129P serial flashes jffs2: Use SLAB_HWCACHE_ALIGN for jffs2_raw_{dirent,inode} slabs mtd: sh_flctl: register sh_flctl using platform_driver_probe() mtd: nand: txx9ndfmc: transfer 512 byte at a time if possible mtd: nand: fix tmio_nand ecc correction mtd: nand: add __nand_correct_data helper function mtd: cfi_cmdset_0002: add 0xFF intolerance for M29W128G mtd: inftl: fix fold chain block number mtd: jedec: fix compilation problem with I28F640C3B definition mtd: nand: fix ECC Correction bug for SMC ordering for NDFC driver mtd: ofpart: Check availability of reg property instead of name property driver/Makefile: Initialize "mtd" and "spi" before "net" mtd: omap: adding DMA mode support in nand prefetch/post-write mtd: omap: add support for nand prefetch-read and post-write mtd: add nand support for w90p910 (v2) mtd: maps: add mtd-ram support to physmap_of mtd: pxa3xx_nand: add single-bit error corrections reporting ...
2009-09-23powerpc: introduce and document sdhci,wp-inverted property for eSDHCAnton Vorontsov1-0/+2
eSDHC block in MPC837x SOCs reports inverted write-protect state, soon sdhci-of driver will look for sdhci,wp-inverted properties to decide whether apply a specific quirk. So, document the property and add it to device tree source files. Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Cc: Pierre Ossman <pierre@ossman.eu> Cc: Kumar Gala <galak@kernel.crashing.org> Cc: David Vrabel <david.vrabel@csr.com> Cc: Ben Dooks <ben@fluff.org> Cc: Sascha Hauer <s.hauer@pengutronix.de> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: <linux-mmc@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-09-21trivial: fix typo "for for" in multiple filesAnand Gadiyar1-1/+1
trivial: fix typo "for for" in multiple files Signed-off-by: Anand Gadiyar <gadiyar@ti.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2009-09-20mtd: maps: add mtd-ram support to physmap_ofWolfram Sang1-16/+26
Use physmap_of to access RAMs as mtd and add documenation for it. This approach is a lot less intrusive as adding an of-wrapper around plat-ram.c. As most extensions of plat-ram.c (e.g. custom map-functions) can't be mapped to the device tree anyhow, extending physmap_of seems to be the cleanest approach. Tested with a phyCORE-MPC5121e. Signed-off-by: Wolfram Sang <w.sang@pengutronix.de> Cc: Vitaly Wool <vwool@ru.mvista.com> Cc: Artem Bityutskiy <dedekind@infradead.org> Cc: Ken MacLeod <ken@bitsko.slc.ut.us> Cc: Albrecht Dreß <albrecht.dress@arcor.de> Acked-by: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2009-06-28Merge branch 'for-linus' of git://git.o-hand.com/linux-rpurdie-ledsLinus Torvalds1-1/+16
* 'for-linus' of git://git.o-hand.com/linux-rpurdie-leds: leds: Futher document blink_set leds: Add options to have GPIO LEDs start on or keep their state leds: LED driver for National Semiconductor LP3944 Funlight Chip leds: pca9532 - Indent using tabs, not spaces. leds: Remove an orphan Kconfig entry leds: Further document parameters for blink_set() leds: alix-leds2 fixed for Award BIOS leds: leds-gpio - fix a section mismatch leds: add the sysfs interface into the leds-bd2802 driver for changing wave pattern and led current. leds: change the license information leds: fix led-bd2802 errors while resuming
2009-06-26Merge commit 'kumar/next' into mergeBenjamin Herrenschmidt9-1166/+1142
2009-06-23leds: Add options to have GPIO LEDs start on or keep their stateTrent Piepho1-1/+16
There already is a "default-on" trigger but there are problems with it. For one, it's a inefficient way to do it and requires led trigger support to be compiled in. But the real reason is that is produces a glitch on the LED. The GPIO is allocate with the LED *off*, then *later* when the trigger runs it is turned back on. If the LED was already on via the GPIO's reset default or action of the firmware, this produces a glitch where the LED goes from on to off to on. While normally this is fast enough that it wouldn't be noticeable to a human observer, there are still serious problems. One is that there may be something else on the GPIO line, like a hardware alarm or watchdog, that is fast enough to notice the glitch. Another is that the kernel may panic before the LED is turned back on, thus hanging with the LED in the wrong state. This is not just speculation, but actually happened to me with an embedded system that has an LED which should turn off when the kernel finishes booting, which was left in the incorrect state due to a bug in the OF LED binding code. We also let GPIO LEDs get their initial value from whatever the current state of the GPIO line is. On some systems the LEDs are put into some state by the firmware or hardware before Linux boots, and it is desired to have them keep this state which is otherwise unknown to Linux. This requires that the underlying GPIO driver support reading the value of output GPIOs. Some drivers support this and some do not. The platform device binding gains a field in the platform data "default_state" that controls this. There are three constants defined to select from on, off, or keeping the current state. The OpenFirmware binding uses a property named "default-state" that can be set to "on", "off", or "keep". The default if the property isn't present is off. Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Acked-by: Grant Likely <grant.likely@secretlab.ca> Acked-by: Wolfram Sang <w.sang@pengutronix.de> Acked-by: Sean MacLennan <smaclennan@pikatech.com> Signed-off-by: Richard Purdie <rpurdie@linux.intel.com>
2009-06-23powerpc: Refactor device tree bindingKumar Gala9-1166/+1142
Split device tree binding out of booting-without-of.txt and put them into their own files per binding. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>