summaryrefslogtreecommitdiff
path: root/Documentation/trace
AgeCommit message (Collapse)AuthorFilesLines
2016-06-20tracing: expose current->comm to [ku]probe eventsOmar Sandoval2-0/+6
ftrace is very quick to give up on saving the task command line (see `trace_save_cmdline()`). The workaround for events which really care about the command line is to explicitly assign it as part of the entry. However, this doesn't work for kprobe events, as there's no straightforward way to get access to current->comm. Add a kprobe/uprobe event variable $comm which provides exactly that. Link: http://lkml.kernel.org/r/f59b472033b943a370f5f48d0af37698f409108f.1465435894.git.osandov@fb.com Acked-by: Masami Hiramatsu <mhiramat@kernel.org> Signed-off-by: Omar Sandoval <osandov@fb.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2016-05-21Merge tag 'char-misc-4.7-rc1' of ↵Linus Torvalds1-2/+35
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Pull char / misc driver updates from Greg KH: "Here's the big char and misc driver update for 4.7-rc1. Lots of different tiny driver subsystems have updates here with new drivers and functionality. Details in the shortlog. All have been in linux-next with no reported issues for a while" * tag 'char-misc-4.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (125 commits) mcb: Delete num_cells variable which is not required mcb: Fixed bar number assignment for the gdd mcb: Replace ioremap and request_region with the devm version mcb: Implement bus->dev.release callback mcb: export bus information via sysfs mcb: Correctly initialize the bus's device mei: bus: call mei_cl_read_start under device lock coresight: etb10: adjust read pointer only when needed coresight: configuring ETF in FIFO mode when acting as link coresight: tmc: implementing TMC-ETF AUX space API coresight: moving struct cs_buffers to header file coresight: tmc: keep track of memory width coresight: tmc: make sysFS and Perf mode mutually exclusive coresight: tmc: dump system memory content only when needed coresight: tmc: adding mode of operation for link/sinks coresight: tmc: getting rid of multiple read access coresight: tmc: allocating memory when needed coresight: tmc: making prepare/unprepare functions generic coresight: tmc: splitting driver in ETB/ETF and ETR components coresight: tmc: cleaning up header file ...
2016-05-19Merge tag 'trace-v4.7' of ↵Linus Torvalds2-10/+1579
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace Pull tracing updates from Steven Rostedt: "This includes two new updates for the ftrace infrastructure. - With the changing of the code for filtering events by pid, from a list of pids to a bitmask, we can now easily implement following forks. With a new tracing option "event-fork" which, when set, will have tasks with pids in set_event_pid, when they fork, to have their child pids added to set_event_pid and the child will be traced as well. Note, if "event-fork" is set and a task with its pid in set_event_pid exits, its pid will be removed from set_event_pid - The addition of Tom Zanussi's hist triggers. This includes a very thorough documentatino on how to use the hist triggers with events. This introduces a quick and easy way to get histogram data from events and their fields. Some other cleanups and updates were added as well. Like Masami Hiramatsu added test cases for the event trigger and hist triggers. Also I added a speed up of filtering by using a temp buffer when filters are set" * tag 'trace-v4.7' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: (45 commits) tracing: Use temp buffer when filtering events tracing: Remove TRACE_EVENT_FL_USE_CALL_FILTER logic tracing: Remove unused function trace_current_buffer_lock_reserve() tracing: Remove one use of trace_current_buffer_lock_reserve() tracing: Have trace_buffer_unlock_commit() call the _regs version with NULL tracing: Remove unused function trace_current_buffer_discard_commit() tracing: Move trace_buffer_unlock_commit{_regs}() to local header tracing: Fold filter_check_discard() into its only user tracing: Make filter_check_discard() local tracing: Move event_trigger_unlock_commit{_regs}() to local header tracing: Don't use the address of the buffer array name in copy_from_user tracing: Handle tracing_map_alloc_elts() error path correctly tracing: Add check for NULL event field when creating hist field tracing: checking for NULL instead of IS_ERR() tracing: Do not inherit event-fork option for instances tracing: Fix unsigned comparison to zero in hist trigger code kselftests/ftrace: Add a test for log2 modifier of hist trigger tracing: Add hist trigger 'log2' modifier kselftests/ftrace: Add hist trigger testcases kselftests/ftrace : Add event trigger testcases ...
2016-05-04coresight: stm: adding driver for CoreSight STM componentPratik Patel1-2/+35
This driver adds support for the STM CoreSight IP block, allowing any system compoment (HW or SW) to log and aggregate messages via a single entity. The CoreSight STM exposes an application defined number of channels called stimulus port. Configuration is done using entries in sysfs and channels made available to userspace via configfs. Signed-off-by: Pratik Patel <pratikp@codeaurora.org> Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org> Reviewed-by: Michael Williams <michael.williams@arm.com> Signed-off-by: Chunyan Zhang <zhang.chunyan@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-04-23sched/fair: Gather CPU load functions under a more conventional namespaceFrederic Weisbecker1-5/+5
The CPU load update related functions have a weak naming convention currently, starting with update_cpu_load_*() which isn't ideal as "update" is a very generic concept. Since two of these functions are public already (and a third is to come) that's enough to introduce a more conventional naming scheme. So let's do the following rename instead: update_cpu_load_*() -> cpu_load_update_*() Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Byungchul Park <byungchul.park@lge.com> Cc: Chris Metcalf <cmetcalf@ezchip.com> Cc: Christoph Lameter <cl@linux.com> Cc: Luiz Capitulino <lcapitulino@redhat.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul E . McKenney <paulmck@linux.vnet.ibm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Rik van Riel <riel@redhat.com> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/1460555812-25375-2-git-send-email-fweisbec@gmail.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-04-20tracing: Add support for named hist triggersTom Zanussi1-8/+266
Allow users to define 'named' hist triggers. All triggers created with the same 'name=xxx' option will update the same shared histogram data. This expands the hist trigger syntax from this: # echo hist:keys=xxx ... [ if filter] > event/trigger to this: # echo hist:name=xxx:keys=xxx ... [ if filter] > event/trigger Named histograms must use a 'compatible' set of keys and values, which means each event added to a set of named triggers must have the same names and types. Reading the 'hist' file of any of the participating events will produce the same output as any other participating event, which is to be expected since they share the same data. Link: http://lkml.kernel.org/r/1dbc84ee3322a75daaf5b3ef1d0cc0a2fb682fc7.1457029949.git.tom.zanussi@linux.intel.com Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com> Tested-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Reviewed-by: Namhyung Kim <namhyung@kernel.org> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2016-04-20tracing: Add support for multiple hist triggers per eventTom Zanussi1-6/+148
Allow users to define any number of hist triggers per trace event. Any number of hist triggers may be added for a given event, which may differ by key, value, or filter. Reading the event's 'hist' file will display the output of all the hist triggers defined on an event concatenated in the order they were defined. Link: http://lkml.kernel.org/r/48a0c8dd34c344571de880fb35e211c6d9a28961.1457029949.git.tom.zanussi@linux.intel.com Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com> Tested-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Reviewed-by: Namhyung Kim <namhyung@kernel.org> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2016-04-20tracing: Add 'hist' trigger DocumentationTom Zanussi1-0/+1155
Add documentation and usage examples for 'hist' triggers. Link: http://lkml.kernel.org/r/2e13f35f47fea6d647f0efefccfc9673ea84b29f.1457029949.git.tom.zanussi@linux.intel.com Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com> Tested-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Reviewed-by: Namhyung Kim <namhyung@kernel.org> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2016-04-19tracing: Update the documentation to describe "event-fork" optionSteven Rostedt (Red Hat)1-10/+24
Add documentation to the ftrace.txt file in Documentation to describe the event-fork option. Also add the missing "display-graph" option now that it shows up in the trace_options file (from a previous commit). Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2015-12-06x86, tracing, perf: Add trace point for MSR accessesAndi Kleen2-0/+74
For debugging low level code interacting with the CPU it is often useful to trace the MSR read/writes. This gives a concise summary of PMU and other operations. perf has an ad-hoc way to do this using trace_printk, but it's somewhat limited (and also now spews ugly boot messages when enabled) Instead define real trace points for all MSR accesses. This adds three new trace points: read_msr and write_msr and rdpmc. They also report if the access faulted (if *_safe is used) This allows filtering and triggering on specific MSR values, which allows various more advanced debugging techniques. All the values are well defined in the CPU documentation. The trace can be post processed with Documentation/trace/postprocess/decode_msr.py to add symbolic MSR names to the trace. I only added it to native MSR accesses in C, not paravirtualized or in entry*.S (which is not too interesting) Originally the patch kit moved the MSRs out of line. This uses an alternative approach recommended by Steven Rostedt of only moving the trace calls out of line, but open coding the access to the jump label. Signed-off-by: Andi Kleen <ak@linux.intel.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Acked-by: Steven Rostedt <rostedt@goodmis.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vince Weaver <vincent.weaver@maine.edu> Link: http://lkml.kernel.org/r/1449018060-1742-3-git-send-email-andi@firstfloor.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-11-07Merge tag 'trace-v4.4' of ↵Linus Torvalds2-0/+41
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace Pull tracking updates from Steven Rostedt: "Most of the changes are clean ups and small fixes. Some of them have stable tags to them. I searched through my INBOX just as the merge window opened and found lots of patches to pull. I ran them through all my tests and they were in linux-next for a few days. Features added this release: ---------------------------- - Module globbing. You can now filter function tracing to several modules. # echo '*:mod:*snd*' > set_ftrace_filter (Dmitry Safonov) - Tracer specific options are now visible even when the tracer is not active. It was rather annoying that you can only see and modify tracer options after enabling the tracer. Now they are in the options/ directory even when the tracer is not active. Although they are still only visible when the tracer is active in the trace_options file. - Trace options are now per instance (although some of the tracer specific options are global) - New tracefs file: set_event_pid. If any pid is added to this file, then all events in the instance will filter out events that are not part of this pid. sched_switch and sched_wakeup events handle next and the wakee pids" * tag 'trace-v4.4' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: (68 commits) tracefs: Fix refcount imbalance in start_creating() tracing: Put back comma for empty fields in boot string parsing tracing: Apply tracer specific options from kernel command line. tracing: Add some documentation about set_event_pid ring_buffer: Remove unneeded smp_wmb() before wakeup of reader benchmark tracing: Allow dumping traces without tracking trace started cpus ring_buffer: Fix more races when terminating the producer in the benchmark ring_buffer: Do no not complete benchmark reader too early tracing: Remove redundant TP_ARGS redefining tracing: Rename max_stack_lock to stack_trace_max_lock tracing: Allow arch-specific stack tracer recordmcount: arm64: Replace the ignored mcount call into nop recordmcount: Fix endianness handling bug for nop_mcount tracepoints: Fix documentation of RCU lockdep checks tracing: ftrace_event_is_function() can return boolean tracing: is_legal_op() can return boolean ring-buffer: rb_event_is_commit() can return boolean ring-buffer: rb_per_cpu_empty() can return boolean ring_buffer: ring_buffer_empty{cpu}() can return boolean ring-buffer: rb_is_reader_page() can return boolean ...
2015-11-04tracing: Add some documentation about set_event_pidSteven Rostedt (Red Hat)2-0/+24
Update Documentation to include some comments about how to use set_event_pid. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2015-10-21Documentation: ftrace: Module globbing usageDmitry Safonov1-0/+17
Link: http://lkml.kernel.org/r/1443545176-3215-5-git-send-email-0x7f454c46@gmail.com Signed-off-by: Dmitry Safonov <0x7f454c46@gmail.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2015-10-04intel_th: Add driver infrastructure for Intel(R) Trace Hub devicesAlexander Shishkin1-0/+99
Intel(R) Trace Hub (TH) is a set of hardware blocks (subdevices) that produce, switch and output trace data from multiple hardware and software sources over several types of trace output ports encoded in System Trace Protocol (MIPI STPv2) and is intended to perform full system debugging. For these subdevices, we create a bus, where they can be discovered and configured by userspace software. This patch creates this bus infrastructure, three types of devices (source, output, switch), resource allocation, some callback mechanisms to facilitate communication between the subdevices' drivers and some common sysfs attributes. Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-10-04stm class: Introduce an abstraction for System Trace Module devicesAlexander Shishkin1-0/+80
A System Trace Module (STM) is a device exporting data in System Trace Protocol (STP) format as defined by MIPI STP standards. Examples of such devices are Intel(R) Trace Hub and Coresight STM. This abstraction provides a unified interface for software trace sources to send their data over an STM device to a debug host. In order to do that, such a trace source needs to be assigned a pair of master/channel identifiers that all the data from this source will be tagged with. The STP decoder on the debug host side will use these master/channel tags to distinguish different trace streams from one another inside one STP stream. This abstraction provides a configfs-based policy management mechanism for dynamic allocation of these master/channel pairs based on trace source-supplied string identifier. It has the flexibility of being defined at runtime and at the same time (provided that the policy definition is aligned with the decoding end) consistency. For userspace trace sources, this abstraction provides write()-based and mmap()-based (if the underlying stm device allows this) output mechanism. For kernel-side trace sources, we provide "stm_source" device class that can be connected to an stm device at run time. Cc: linux-api@vger.kernel.org Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org> Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-09-09Merge tag 'trace-v4.3' of ↵Linus Torvalds1-13/+38
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace Pull tracing update from Steven Rostedt: "Mostly this is just clean ups and micro optimizations. The changes with more meat are: - Allowing the trace event filters to filter on CPU number and process ids - Two new markers for trace output latency were added (10 and 100 msec latencies) - Have tracing_thresh filter function profiling time I also worked on modifying the ring buffer code for some future work, and moved the adding of the timestamp around. One of my changes caused a regression, and since other changes were built on top of it and already tested, I had to operate a revert of that change. Instead of rebasing, this change set has the code that caused a regression as well as the code to revert that change without touching the other changes that were made on top of it" * tag 'trace-v4.3' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: ring-buffer: Revert "ring-buffer: Get timestamp after event is allocated" tracing: Don't make assumptions about length of string on task rename tracing: Allow triggers to filter for CPU ids and process names ftrace: Format MCOUNT_ADDR address as type unsigned long tracing: Introduce two additional marks for delay ftrace: Fix function_graph duration spacing with 7-digits ftrace: add tracing_thresh to function profile tracing: Clean up stack tracing and fix fentry updates ring-buffer: Reorganize function locations ring-buffer: Make sure event has enough room for extend and padding ring-buffer: Get timestamp after event is allocated ring-buffer: Move the adding of the extended timestamp out of line ring-buffer: Add event descriptor to simplify passing data ftrace: correct the counter increment for trace_buffer data tracing: Fix for non-continuous cpu ids tracing: Prefer kcalloc over kzalloc with multiply
2015-09-04Merge tag 'powerpc-4.3-1' of ↵Linus Torvalds1-0/+5
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux Pull powerpc updates from Michael Ellerman: - support "hybrid" iommu/direct DMA ops for coherent_mask < dma_mask from Benjamin Herrenschmidt - EEH fixes for SRIOV from Gavin - introduce rtas_get_sensor_fast() for IRQ handlers from Thomas Huth - use hardware RNG for arch_get_random_seed_* not arch_get_random_* from Paul Mackerras - seccomp filter support from Michael Ellerman - opal_cec_reboot2() handling for HMIs & machine checks from Mahesh Salgaonkar - add powerpc timebase as a trace clock source from Naveen N. Rao - misc cleanups in the xmon, signal & SLB code from Anshuman Khandual - add an inline function to update POWER8 HID0 from Gautham R. Shenoy - fix pte_pagesize_index() crash on 4K w/64K hash from Michael Ellerman - drop support for 64K local store on 4K kernels from Michael Ellerman - move dma_get_required_mask() from pnv_phb to pci_controller_ops from Andrew Donnellan - initialize distance lookup table from drconf path from Nikunj A Dadhania - enable RTC class support from Vaibhav Jain - disable automatically blocked PCI config from Gavin Shan - add LEDs driver for PowerNV platform from Vasant Hegde - fix endianness issues in the HVSI driver from Laurent Dufour - kexec endian fixes from Samuel Mendoza-Jonas - fix corrupted pdn list from Gavin Shan - fix fenced PHB caused by eeh_slot_error_detail() from Gavin Shan - Freescale updates from Scott: Highlights include 32-bit memcpy/memset optimizations, checksum optimizations, 85xx config fragments and updates, device tree updates, e6500 fixes for non-SMP, and misc cleanup and minor fixes. - a ton of cxl updates & fixes: - add explicit precision specifiers from Rasmus Villemoes - use more common format specifier from Rasmus Villemoes - destroy cxl_adapter_idr on module_exit from Johannes Thumshirn - destroy afu->contexts_idr on release of an afu from Johannes Thumshirn - compile with -Werror from Daniel Axtens - EEH support from Daniel Axtens - plug irq_bitmap getting leaked in cxl_context from Vaibhav Jain - add alternate MMIO error handling from Ian Munsie - allow release of contexts which have been OPENED but not STARTED from Andrew Donnellan - remove use of macro DEFINE_PCI_DEVICE_TABLE from Vaishali Thakkar - release irqs if memory allocation fails from Vaibhav Jain - remove racy attempt to force EEH invocation in reset from Daniel Axtens - fix + cleanup error paths in cxl_dev_context_init from Ian Munsie - fix force unmapping mmaps of contexts allocated through the kernel api from Ian Munsie - set up and enable PSL Timebase from Philippe Bergheaud * tag 'powerpc-4.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (140 commits) cxl: Set up and enable PSL Timebase cxl: Fix force unmapping mmaps of contexts allocated through the kernel api cxl: Fix + cleanup error paths in cxl_dev_context_init powerpc/eeh: Fix fenced PHB caused by eeh_slot_error_detail() powerpc/pseries: Cleanup on pci_dn_reconfig_notifier() powerpc/pseries: Fix corrupted pdn list powerpc/powernv: Enable LEDS support powerpc/iommu: Set default DMA offset in dma_dev_setup cxl: Remove racy attempt to force EEH invocation in reset cxl: Release irqs if memory allocation fails cxl: Remove use of macro DEFINE_PCI_DEVICE_TABLE powerpc/powernv: Fix mis-merge of OPAL support for LEDS driver powerpc/powernv: Reset HILE before kexec_sequence() powerpc/kexec: Reset secondary cpu endianness before kexec powerpc/hvsi: Fix endianness issues in the HVSI driver leds/powernv: Add driver for PowerNV platform powerpc/powernv: Create LED platform device powerpc/powernv: Add OPAL interfaces for accessing and modifying system LED states powerpc/powernv: Fix the log message when disabling VF cxl: Allow release of contexts which have been OPENED but not STARTED ...
2015-08-06powerpc/ftrace: add powerpc timebase as a trace clock sourceNaveen N. Rao1-0/+5
Add a new powerpc-specific trace clock using the timebase register, similar to x86-tsc. This gives us - a fast, monotonic, hardware clock source for trace entries, and - a clock that can be used to correlate events across cpus as well as across hypervisor and guests. Signed-off-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com> Acked-by: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-08-05Doc: trace: Fix typo in coresight.txtMasanari Iida1-2/+2
This patch fix spelling typos found in coresight.txt Signed-off-by: Masanari Iida <standby24x7@gmail.com> Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-07-21tracing: Introduce two additional marks for delayJungseok Lee1-13/+38
A fine granulity support for delay would be very useful when profiling VM logics, such as page allocation including page reclaim and memory compaction with function graph. Thus, this patch adds two additional marks with two changes. - An equal sign in mark selection function is removed to align code behavior with comments and documentation. - The function graph example related to delay in ftrace.txt is updated to cover all supported marks. Link: http://lkml.kernel.org/r/1436626300-1679-3-git-send-email-jungseoklee85@gmail.com Cc: Byungchul Park <byungchul.park@lge.com> Signed-off-by: Jungseok Lee <jungseoklee85@gmail.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2015-05-13Documentation: tracing: fix grammarRabin Vincent1-2/+2
4a88d44ab17da ("tracing: Remove mentioning of legacy latency_trace file from documentation") changed a sentence to refer to only one file instead of two, but the sentence still uses "they". Fix it. Signed-off-by: Rabin Vincent <rabin@rab.in> Acked-by: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2015-04-03coresight: Correcting documentation typographical errorMathieu Poirier1-1/+1
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-02-15Merge tag 'char-misc-3.20-rc1' of ↵Linus Torvalds1-2/+2
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Pull char / misc patches from Greg KH: "Here's the big char/misc driver update for 3.20-rc1. Lots of little things in here, all described in the changelog. Nothing major or unusual, except maybe the binder selinux stuff, which was all acked by the proper selinux people and they thought it best to come through this tree. All of this has been in linux-next with no reported issues for a while" * tag 'char-misc-3.20-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (90 commits) coresight: fix function etm_writel_cp14() parameter order coresight-etm: remove check for unknown Kconfig macro coresight: fixing CPU hwid lookup in device tree coresight: remove the unnecessary function coresight_is_bit_set() coresight: fix the debug AMBA bus name coresight: remove the extra spaces coresight: fix the link between orphan connection and newly added device coresight: remove the unnecessary replicator property coresight: fix the replicator subtype value pdfdocs: Fix 'make pdfdocs' failure for 'uio-howto.tmpl' mcb: Fix error path of mcb_pci_probe virtio/console: verify device has config space ti-st: clean up data types (fix harmless memory corruption) mei: me: release hw from reset only during the reset flow mei: mask interrupt set bit on clean reset bit extcon: max77693: Constify struct regmap_config extcon: adc-jack: Release IIO channel on driver remove extcon: Remove duplicated include from extcon-class.c Drivers: hv: vmbus: hv_process_timer_expiration() can be static Drivers: hv: vmbus: serialize Offer and Rescind offer ...
2015-02-09Documentation: Fix the wrong command `echo -1 > set_ftrace_pid` for cleaning ↵Wang Long1-1/+1
the filter. The command `echo > set_ftrace_pid` should be used to clean the filter quietly. because the command `echo -1 > set_ftrace_pid` will output the following: "bash: echo: write error: Invalid argument". so update the file Documentation/trace/ftrace.txt. Signed-off-by: Wang Long <long.wanglong@huawei.com> Acked-by: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2015-02-04coresight: fix the debug AMBA bus nameKaixu Xia1-2/+2
The right debug AMBA bus name should be APB(Advanced Peripheral Bus), so just fix it. Signed-off-by: Kaixu Xia <xiakaixu@huawei.com> Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-12-15Merge tag 'char-misc-3.19-rc1' of ↵Linus Torvalds1-0/+299
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Pull char/misc driver updates from Greg KH: "Here's the big char/misc driver update for 3.19-rc1 Lots of little things all over the place in different drivers, and a new subsystem, "coresight" has been added. Full details are in the shortlog" * tag 'char-misc-3.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (73 commits) parport: parport_pc, do not remove parent devices early spmi: Remove shutdown/suspend/resume kernel-doc carma-fpga-program: drop videobuf dependency carma-fpga: drop videobuf dependency carma-fpga-program.c: fix compile errors i8k: Fix temperature bug handling in i8k_get_temp() cxl: Name interrupts in /proc/interrupt CXL: Return error to PSL if IRQ demultiplexing fails & print clearer warning coresight-replicator: remove .owner field for driver coresight: fixed comments in coresight.h coresight: fix typo in comment in coresight-priv.h coresight: bindings for coresight drivers coresight: Adding ABI documentation w1: support auto-load of w1_bq27000 module. w1: avoid potential u16 overflow cn: verify msg->len before making callback mei: export fw status registers through sysfs mei: read and print all six FW status registers mei: txe: add cherrytrail device id mei: kill cached host and me csr values ...
2014-12-04tracing: Add additional marks to signal very large time deltasByungchul Park1-3/+7
Currently, function graph tracer prints "!" or "+" just before function execution time to signal a function overhead, depending on the time. And some tracers tracing latency also print "!" or "+" just after time to signal overhead, depending on the interval between events. Even it is usually enough to do that, we sometimes need to signal for bigger execution time than 100 micro seconds. For example, I used function graph tracer to detect if there is any case that exit_mm() takes too much time. I did following steps in /sys/kernel/debug/tracing. It was easier to detect very large excution time with patched kernel than with original kernel. $ echo exit_mm > set_graph_function $ echo function_graph > current_tracer $ echo > trace $ cat trace_pipe > $LOGFILE ... (do something and terminate logging) $ grep "\\$" $LOGFILE 3) $ 22082032 us | } /* kernel_map_pages */ 3) $ 22082040 us | } /* free_pages_prepare */ 3) $ 22082113 us | } /* free_hot_cold_page */ 3) $ 22083455 us | } /* free_hot_cold_page_list */ 3) $ 22083895 us | } /* release_pages */ 3) $ 22177873 us | } /* free_pages_and_swap_cache */ 3) $ 22178929 us | } /* unmap_single_vma */ 3) $ 22198885 us | } /* unmap_vmas */ 3) $ 22206949 us | } /* exit_mmap */ 3) $ 22207659 us | } /* mmput */ 3) $ 22207793 us | } /* exit_mm */ And then, it was easy to find out that a schedule-out occured by sub_preempt_count() within kernel_map_pages(). To detect very large function exection time caused by either problematic function implementation or scheduling issues, this patch can be useful. Link: http://lkml.kernel.org/r/1416789259-24038-1-git-send-email-byungchul.park@lge.com Signed-off-by: Byungchul Park <byungchul.park@lge.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2014-11-21ftrace, kprobes: Support IPMODIFY flag to find IP modify conflictMasami Hiramatsu1-0/+5
Introduce FTRACE_OPS_FL_IPMODIFY to avoid conflict among ftrace users who may modify regs->ip to change the execution path. If two or more users modify the regs->ip on the same function entry, one of them will be broken. So they must add IPMODIFY flag and make sure that ftrace_set_filter_ip() succeeds. Note that ftrace doesn't allow ftrace_ops which has IPMODIFY flag to have notrace hash, and the ftrace_ops must have a filter hash (so that the ftrace_ops can hook only specific entries), because it strongly depends on the address and must be allowed for only few selected functions. Link: http://lkml.kernel.org/r/20141121102516.11844.27829.stgit@localhost.localdomain Cc: Jiri Kosina <jkosina@suse.cz> Cc: Seth Jennings <sjenning@redhat.com> Cc: Petr Mladek <pmladek@suse.cz> Cc: Vojtech Pavlik <vojtech@suse.cz> Cc: Miroslav Benes <mbenes@suse.cz> Cc: Ingo Molnar <mingo@kernel.org> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> [ fixed up some of the comments ] Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2014-11-08coresight: documentation for coresight framework and driversMathieu Poirier1-0/+299
Documentation containing an explanation on what the framework provides and the drivers working with it. A minimal example on how to use the functionality is also provided. Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-08-07mm: trace-vmscan-postprocess.pl: report the number of file/anon pages ↵Chen Yucong1-0/+53
respectively Until now, the reporting from trace-vmscan-postprocess.pl is not very useful because we cannot directly use this script for checking the file/anon ratio of scanning. This patch aims to report respectively the number of file/anon pages which were scanned/reclaimed by kswapd or direct-reclaim. Sample output is usually something like the following. Summary Direct reclaims: 8823 Direct reclaim pages scanned: 2438797 Direct reclaim file pages scanned: 1315200 Direct reclaim anon pages scanned: 1123597 Direct reclaim pages reclaimed: 446139 Direct reclaim file pages reclaimed: 378668 Direct reclaim anon pages reclaimed: 67471 Direct reclaim write file sync I/O: 0 Direct reclaim write anon sync I/O: 0 Direct reclaim write file async I/O: 0 Direct reclaim write anon async I/O: 4240 Wake kswapd requests: 122310 Time stalled direct reclaim: 13.78 seconds Kswapd wakeups: 25817 Kswapd pages scanned: 170779115 Kswapd file pages scanned: 162725123 Kswapd anon pages scanned: 8053992 Kswapd pages reclaimed: 129065738 Kswapd file pages reclaimed: 128500930 Kswapd anon pages reclaimed: 564808 Kswapd reclaim write file sync I/O: 0 Kswapd reclaim write anon sync I/O: 0 Kswapd reclaim write file async I/O: 36 Kswapd reclaim write anon async I/O: 730730 Time kswapd awake: 1015.50 seconds Signed-off-by: Chen Yucong <slaoub@gmail.com> Cc: Mel Gorman <mel@csn.ul.ie> Cc: Johannes Weiner <hannes@cmpxchg.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-08-05Merge branch 'sched-core-for-linus' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull scheduler updates from Ingo Molnar: - Move the nohz kick code out of the scheduler tick to a dedicated IPI, from Frederic Weisbecker. This necessiated quite some background infrastructure rework, including: * Clean up some irq-work internals * Implement remote irq-work * Implement nohz kick on top of remote irq-work * Move full dynticks timer enqueue notification to new kick * Move multi-task notification to new kick * Remove unecessary barriers on multi-task notification - Remove proliferation of wait_on_bit() action functions and allow wait_on_bit_action() functions to support a timeout. (Neil Brown) - Another round of sched/numa improvements, cleanups and fixes. (Rik van Riel) - Implement fast idling of CPUs when the system is partially loaded, for better scalability. (Tim Chen) - Restructure and fix the CPU hotplug handling code that may leave cfs_rq and rt_rq's throttled when tasks are migrated away from a dead cpu. (Kirill Tkhai) - Robustify the sched topology setup code. (Peterz Zijlstra) - Improve sched_feat() handling wrt. static_keys (Jason Baron) - Misc fixes. * 'sched-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (37 commits) sched/fair: Fix 'make xmldocs' warning caused by missing description sched: Use macro for magic number of -1 for setparam sched: Robustify topology setup sched: Fix sched_setparam() policy == -1 logic sched: Allow wait_on_bit_action() functions to support a timeout sched: Remove proliferation of wait_on_bit() action functions sched/numa: Revert "Use effective_load() to balance NUMA loads" sched: Fix static_key race with sched_feat() sched: Remove extra static_key*() function indirection sched/rt: Fix replenish_dl_entity() comments to match the current upstream code sched: Transform resched_task() into resched_curr() sched/deadline: Kill task_struct->pi_top_task sched: Rework check_for_tasks() sched/rt: Enqueue just unthrottled rt_rq back on the stack in __disable_runtime() sched/fair: Disable runtime_enabled on dying rq sched/numa: Change scan period code to match intent sched/numa: Rework best node setting in task_numa_migrate() sched/numa: Examine a task move when examining a task swap sched/numa: Simplify task_numa_compare() sched/numa: Use effective_load() to balance NUMA loads ...
2014-08-04Merge tag 'trace-3.17' of ↵Linus Torvalds1-26/+0
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace Pull tracing updates from Steven Rostedt: "This pull request has a lot of work done. The main thing is the changes to the ftrace function callback infrastructure. It's introducing a way to allow different functions to call directly different trampolines instead of all calling the same "mcount" one. The only user of this for now is the function graph tracer, which always had a different trampoline, but the function tracer trampoline was called and did basically nothing, and then the function graph tracer trampoline was called. The difference now, is that the function graph tracer trampoline can be called directly if a function is only being traced by the function graph trampoline. If function tracing is also happening on the same function, the old way is still done. The accounting for this takes up more memory when function graph tracing is activated, as it needs to keep track of which functions it uses. I have a new way that wont take as much memory, but it's not ready yet for this merge window, and will have to wait for the next one. Another big change was the removal of the ftrace_start/stop() calls that were used by the suspend/resume code that stopped function tracing when entering into suspend and resume paths. The stop of ftrace was done because there was some function that would crash the system if one called smp_processor_id()! The stop/start was a big hammer to solve the issue at the time, which was when ftrace was first introduced into Linux. Now ftrace has better infrastructure to debug such issues, and I found the problem function and labeled it with "notrace" and function tracing can now safely be activated all the way down into the guts of suspend and resume Other changes include clean ups of uprobe code, clean up of the trace_seq() code, and other various small fixes and clean ups to ftrace and tracing" * tag 'trace-3.17' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: (57 commits) ftrace: Add warning if tramp hash does not match nr_trampolines ftrace: Fix trampoline hash update check on rec->flags ring-buffer: Use rb_page_size() instead of open coded head_page size ftrace: Rename ftrace_ops field from trampolines to nr_trampolines tracing: Convert local function_graph functions to static ftrace: Do not copy old hash when resetting tracing: let user specify tracing_thresh after selecting function_graph ring-buffer: Always run per-cpu ring buffer resize with schedule_work_on() tracing: Remove function_trace_stop and HAVE_FUNCTION_TRACE_MCOUNT_TEST s390/ftrace: remove check of obsolete variable function_trace_stop arm64, ftrace: Remove check of obsolete variable function_trace_stop Blackfin: ftrace: Remove check of obsolete variable function_trace_stop metag: ftrace: Remove check of obsolete variable function_trace_stop microblaze: ftrace: Remove check of obsolete variable function_trace_stop MIPS: ftrace: Remove check of obsolete variable function_trace_stop parisc: ftrace: Remove check of obsolete variable function_trace_stop sh: ftrace: Remove check of obsolete variable function_trace_stop sparc64,ftrace: Remove check of obsolete variable function_trace_stop tile: ftrace: Remove check of obsolete variable function_trace_stop ftrace: x86: Remove check of obsolete variable function_trace_stop ...
2014-07-18ftrace: Remove check for HAVE_FUNCTION_TRACE_MCOUNT_TESTSteven Rostedt (Red Hat)1-26/+0
function_trace_stop is no longer used to disable function tracing. This means that archs are no longer limited if it does not support checking this variable in the mcount trampoline. No need to use the list_func for archs that do not support this obsolete method. Acked-by: James Hogan <james.hogan@imgtec.com> Reviewed-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2014-07-16Merge tag 'v3.16-rc5' into sched/core, to refresh the branch before applying ↵Ingo Molnar1-12/+2
bigger tree-wide changes Signed-off-by: Ingo Molnar <mingo@kernel.org>
2014-07-16sched: Transform resched_task() into resched_curr()Kirill Tkhai1-1/+1
We always use resched_task() with rq->curr argument. It's not possible to reschedule any task but rq's current. The patch introduces resched_curr(struct rq *) to replace all of the repeating patterns. The main aim is cleanup, but there is a little size profit too: (before) $ size kernel/sched/built-in.o text data bss dec hex filename 155274 16445 7042 178761 2ba49 kernel/sched/built-in.o $ size vmlinux text data bss dec hex filename 7411490 1178376 991232 9581098 92322a vmlinux (after) $ size kernel/sched/built-in.o text data bss dec hex filename 155130 16445 7042 178617 2b9b9 kernel/sched/built-in.o $ size vmlinux text data bss dec hex filename 7411362 1178376 991232 9580970 9231aa vmlinux I was choosing between resched_curr() and resched_rq(), and the first name looks better for me. A little lie in Documentation/trace/ftrace.txt. I have not actually collected the tracing again. With a hope the patch won't make execution times much worse :) Signed-off-by: Kirill Tkhai <tkhai@yandex.ru> Signed-off-by: Peter Zijlstra <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Randy Dunlap <rdunlap@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Link: http://lkml.kernel.org/r/20140628200219.1778.18735.stgit@localhost Signed-off-by: Ingo Molnar <mingo@kernel.org>
2014-07-03mm:vmscan: update the trace-vmscan-postprocess.pl for event ↵Chen Yucong1-12/+2
vmscan/mm_vmscan_lru_isolate When using trace-vmscan-postprocess.pl for checking the file/anon rate of scanning, we can find that it can not be performed. At the same time, the following message will be reported: WARNING: Format not as expected for event vmscan/mm_vmscan_lru_isolate 'file' != 'contig_taken' Fewer fields than expected in format at ./trace-vmscan-postprocess.pl line 171, <FORMAT> line 76. In trace-vmscan-postprocess.pl, (contig_taken, contig_dirty, and contig_failed) are be associated respectively to (nr_lumpy_taken, nr_lumpy_dirty, and nr_lumpy_failed) for lumpy reclaim. Via commit c53919adc045 ("mm: vmscan: remove lumpy reclaim"), lumpy reclaim had already been removed by Mel, but the update for trace-vmscan-postprocess.pl was missed. Signed-off-by: Chen Yucong <slaoub@gmail.com> Cc: Mel Gorman <mel@csn.ul.ie> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-06-10Merge tag 'trace-3.16' of ↵Linus Torvalds2-0/+50
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace Pull tracing updates from Steven Rostedt: "Lots of tweaks, small fixes, optimizations, and some helper functions to help out the rest of the kernel to ease their use of trace events. The big change for this release is the allowing of other tracers, such as the latency tracers, to be used in the trace instances and allow for function or function graph tracing to be in the top level simultaneously" * tag 'trace-3.16' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: (44 commits) tracing: Fix memory leak on instance deletion tracing: Fix leak of ring buffer data when new instances creation fails tracing/kprobes: Avoid self tests if tracing is disabled on boot up tracing: Return error if ftrace_trace_arrays list is empty tracing: Only calculate stats of tracepoint benchmarks for 2^32 times tracing: Convert stddev into u64 in tracepoint benchmark tracing: Introduce saved_cmdlines_size file tracing: Add __get_dynamic_array_len() macro for trace events tracing: Remove unused variable in trace_benchmark tracing: Eliminate double free on failure of allocation on boot up ftrace/x86: Call text_ip_addr() instead of the duplicated code tracing: Print max callstack on stacktrace bug tracing: Move locking of trace_cmdline_lock into start/stop seq calls tracing: Try again for saved cmdline if failed due to locking tracing: Have saved_cmdlines use the seq_read infrastructure tracing: Add tracepoint benchmark tracepoint tracing: Print nasty banner when trace_printk() is in use tracing: Add funcgraph_tail option to print function name after closing braces tracing: Eliminate duplicate TRACE_GRAPH_PRINT_xx defines tracing: Add __bitmask() macro to trace events to cpumasks and other bitmasks ...
2014-06-04Merge branch 'for-linus' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial into next Pull trivial tree changes from Jiri Kosina: "Usual pile of patches from trivial tree that make the world go round" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (23 commits) staging: go7007: remove reference to CONFIG_KMOD aic7xxx: Remove obsolete preprocessor define of: dma: doc fixes doc: fix incorrect formula to calculate CommitLimit value doc: Note need of bc in the kernel build from 3.10 onwards mm: Fix printk typo in dmapool.c modpost: Fix comment typo "Modules.symvers" Kconfig.debug: Grammar s/addition/additional/ wimax: Spelling s/than/that/, wording s/destinatary/recipient/ aic7xxx: Spelling s/termnation/termination/ arm64: mm: Remove superfluous "the" in comment of: Spelling s/anonymouns/anonymous/ dma: imx-sdma: Spelling s/determnine/determine/ ath10k: Improve grammar in comments ath6kl: Spelling s/determnine/determine/ of: Improve grammar for of_alias_get_id() documentation drm/exynos: Spelling s/contro/control/ radio-bcm2048.c: fix wrong overflow check doc: printk-formats: do not mention casts for u64/s64 doc: spelling error changes ...
2014-05-21tracing: Add funcgraph_tail option to print function name after closing bracesRobert Elliott1-0/+26
In the function-graph tracer, add a funcgraph_tail option to print the function name on all } lines, not just functions whose first line is no longer in the trace buffer. If a function calls other traced functions, its total time appears on its } line. This change allows grep to be used to determine the function for which the line corresponds. Update Documentation/trace/ftrace.txt to describe this new option. Link: http://lkml.kernel.org/p/20140520221041.8359.6782.stgit@beardog.cce.hp.com Signed-off-by: Robert Elliott <elliott@hp.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2014-05-07tracing: Add trace_<tracepoint>_enabled() functionSteven Rostedt (Red Hat)1-0/+24
There are some code paths in the kernel that need to do some preparations before it calls a tracepoint. As that code is worthless overhead when the tracepoint is not enabled, it would be prudent to have that code only run when the tracepoint is active. To accomplish this, all tracepoints now get a static inline function called "trace_<tracepoint-name>_enabled()" which returns true when the tracepoint is enabled and false otherwise. As an added bonus, that function uses the static_key of the tracepoint such that no branch is needed. if (trace_mytracepoint_enabled()) { arg = process_tp_arg(); trace_mytracepoint(arg); } Will keep the "process_tp_arg()" (which may be expensive to run) from being executed when the tracepoint isn't enabled. It's best to encapsulate the tracepoint itself in the if statement just to keep races. For example, if you had: if (trace_mytracepoint_enabled()) arg = process_tp_arg(); trace_mytracepoint(arg); There's a chance that the tracepoint could be enabled just after the if statement, and arg will be undefined when calling the tracepoint. Link: http://lkml.kernel.org/r/20140506094407.507b6435@gandalf.local.home Acked-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2014-05-05doc: spelling error changesCarlos Garcia1-1/+1
Fixed multiple spelling errors. Acked-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Carlos E. Garcia <carlos@cgarcia.org> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2014-04-03Merge tag 'trace-3.15' of ↵Linus Torvalds1-4/+1
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace Pull tracing updates from Steven Rostedt: "Most of the changes were largely clean ups, and some documentation. But there were a few features that were added: Uprobes now work with event triggers and multi buffers and have support under ftrace and perf. The big feature is that the function tracer can now be used within the multi buffer instances. That is, you can now trace some functions in one buffer, others in another buffer, all functions in a third buffer and so on. They are basically agnostic from each other. This only works for the function tracer and not for the function graph trace, although you can have the function graph tracer running in the top level buffer (or any tracer for that matter) and have different function tracing going on in the sub buffers" * tag 'trace-3.15' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: (45 commits) tracing: Add BUG_ON when stack end location is over written tracepoint: Remove unused API functions Revert "tracing: Move event storage for array from macro to standalone function" ftrace: Constify ftrace_text_reserved tracepoints: API doc update to tracepoint_probe_register() return value tracepoints: API doc update to data argument ftrace: Fix compilation warning about control_ops_free ftrace/x86: BUG when ftrace recovery fails ftrace: Warn on error when modifying ftrace function ftrace: Remove freelist from struct dyn_ftrace ftrace: Do not pass data to ftrace_dyn_arch_init ftrace: Pass retval through return in ftrace_dyn_arch_init() ftrace: Inline the code from ftrace_dyn_table_alloc() ftrace: Cleanup of global variables ftrace_new_pgs and ftrace_update_cnt tracing: Evaluate len expression only once in __dynamic_array macro tracing: Correctly expand len expressions from __dynamic_array macro tracing/module: Replace include of tracepoint.h with jump_label.h in module.h tracing: Fix event header migrate.h to include tracepoint.h tracing: Fix event header writeback.h to include tracepoint.h tracing: Warn if a tracepoint is not set via debugfs ...
2014-04-03Merge branch 'for-linus' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial Pull trivial tree updates from Jiri Kosina: "Usual rocket science -- mostly documentation and comment updates" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: sparse: fix comment doc: fix double words isdn: capi: fix "CAPI_VERSION" comment doc: DocBook: Fix typos in xml and template file Bluetooth: add module name for btwilink driver core: unexport static function create_syslog_header mmc: core: typo fix in printk specifier ARM: spear: clean up editing mistake net-sysfs: fix comment typo 'CONFIG_SYFS' doc: Insert MODULE_ in module-signing macros Documentation: update URL to hfsplus Technote 1150 gpio: update path to documentation ixgbe: Fix format string in ixgbe_fcoe. Kconfig: Remove useless "default N" lines user_namespace.c: Remove duplicated word in comment CREDITS: fix formatting treewide: Fix typo in Documentation/DocBook mm: Fix warning on make htmldocs caused by slab.c ata: ata-samsung_cf: cleanup in header file idr: remove unused prototype of idr_free()
2014-03-21doc: fix double wordsMasanari Iida1-1/+1
Fix double words "the the" in various files within Documentations. Signed-off-by: Masanari Iida <standby24x7@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2014-03-07ftrace: Do not pass data to ftrace_dyn_arch_initJiri Slaby1-1/+1
As the data parameter is not really used by any ftrace_dyn_arch_init, remove that from ftrace_dyn_arch_init. This also removes the addr local variable from ftrace_init which is now unused. Note the documentation was imprecise as it did not suggest to set (*data) to 0. Link: http://lkml.kernel.org/r/1393268401-24379-4-git-send-email-jslaby@suse.cz Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: linux-arch@vger.kernel.org Signed-off-by: Jiri Slaby <jslaby@suse.cz> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2014-03-07ftrace: Pass retval through return in ftrace_dyn_arch_init()Jiri Slaby1-3/+0
No architecture uses the "data" parameter in ftrace_dyn_arch_init() in any way, it just sets the value to 0. And this is used as a return value in the caller -- ftrace_init, which just checks the retval against zero. Note there is also "return 0" in every ftrace_dyn_arch_init. So it is enough to check the retval and remove all the indirect sets of data on all archs. Link: http://lkml.kernel.org/r/1393268401-24379-3-git-send-email-jslaby@suse.cz Cc: linux-arch@vger.kernel.org Signed-off-by: Jiri Slaby <jslaby@suse.cz> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2014-02-11PM / QoS: Rename device resume latency QoS itemsRafael J. Wysocki1-1/+1
Rename symbols, variables, functions and structure fields related do the resume latency device PM QoS type so that it is clear where they belong (in particular, to avoid confusion with the latency tolerance device PM QoS type introduced by a subsequent changeset). Update the PM QoS documentation to better reflect its current state. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-01-24Documentation/trace/postprocess/trace-vmscan-postprocess.pl: fix the ↵Vinayak Menon1-9/+9
traceevent regex When irq, preempt and lockdep fields are printed (field 3 in the example below) in the trace output, the script fails. An example entry: kswapd0-610 [000] ...1 158.112152: mm_vmscan_kswapd_wake: nid=0 order=0 Signed-off-by: Vinayak Menon <vinayakm.list@gmail.com> Cc: Mel Gorman <mel@csn.ul.ie> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-01-03tracing/uprobes: Add @+file_offset fetch methodNamhyung Kim1-0/+1
Enable to fetch data from a file offset. Currently it only supports fetching from same binary uprobe set. It'll translate the file offset to a proper virtual address in the process. The syntax is "@+OFFSET" as it does similar to normal memory fetching (@ADDR) which does no address translation. Suggested-by: Oleg Nesterov <oleg@redhat.com> Acked-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Acked-by: Oleg Nesterov <oleg@redhat.com> Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Cc: zhangwei(Jovi) <jovi.zhangwei@huawei.com> Cc: Arnaldo Carvalho de Melo <acme@ghostprotocols.net> Signed-off-by: Namhyung Kim <namhyung@kernel.org>
2014-01-03tracing/uprobes: Add support for full argument access methodsNamhyung Kim1-0/+25
Enable to fetch other types of argument for the uprobes. IOW, we can access stack, memory, deref, bitfield and retval from uprobes now. The format for the argument types are same as kprobes (but @SYMBOL type is not supported for uprobes), i.e: @ADDR : Fetch memory at ADDR $stackN : Fetch Nth entry of stack (N >= 0) $stack : Fetch stack address $retval : Fetch return value +|-offs(FETCHARG) : Fetch memory at FETCHARG +|- offs address Note that the retval only can be used with uretprobes. Original-patch-by: Hyeoncheol Lee <cheol.lee@lge.com> Acked-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Acked-by: Oleg Nesterov <oleg@redhat.com> Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Cc: Oleg Nesterov <oleg@redhat.com> Cc: zhangwei(Jovi) <jovi.zhangwei@huawei.com> Cc: Arnaldo Carvalho de Melo <acme@ghostprotocols.net> Signed-off-by: Hyeoncheol Lee <cheol.lee@lge.com> Signed-off-by: Namhyung Kim <namhyung@kernel.org>