| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Pull VFIO updates from Alex Williamson:
- Expose and allow R/W access to the PCIe DVSEC capability through
vfio-pci, as we already do with the legacy vendor capability
(K V P Satyanarayana)
- Fix kernel-doc issues with structure definitions (Simon Horman)
- Clarify ordering of operations relative to the kvm-vfio device for
driver dependencies against the kvm pointer (Yi Liu)
* tag 'vfio-v6.4-rc1' of https://github.com/awilliam/linux-vfio:
docs: kvm: vfio: Suggest KVM_DEV_VFIO_GROUP_ADD vs VFIO_GROUP_GET_DEVICE_FD ordering
vfio: correct kdoc for ops structures
vfio/pci: Add DVSEC PCI Extended Config Capability to user visible list.
|
|
Pull kvm updates from Paolo Bonzini:
"s390:
- More phys_to_virt conversions
- Improvement of AP management for VSIE (nested virtualization)
ARM64:
- Numerous fixes for the pathological lock inversion issue that
plagued KVM/arm64 since... forever.
- New framework allowing SMCCC-compliant hypercalls to be forwarded
to userspace, hopefully paving the way for some more features being
moved to VMMs rather than be implemented in the kernel.
- Large rework of the timer code to allow a VM-wide offset to be
applied to both virtual and physical counters as well as a
per-timer, per-vcpu offset that complements the global one. This
last part allows the NV timer code to be implemented on top.
- A small set of fixes to make sure that we don't change anything
affecting the EL1&0 translation regime just after having having
taken an exception to EL2 until we have executed a DSB. This
ensures that speculative walks started in EL1&0 have completed.
- The usual selftest fixes and improvements.
x86:
- Optimize CR0.WP toggling by avoiding an MMU reload when TDP is
enabled, and by giving the guest control of CR0.WP when EPT is
enabled on VMX (VMX-only because SVM doesn't support per-bit
controls)
- Add CR0/CR4 helpers to query single bits, and clean up related code
where KVM was interpreting kvm_read_cr4_bits()'s "unsigned long"
return as a bool
- Move AMD_PSFD to cpufeatures.h and purge KVM's definition
- Avoid unnecessary writes+flushes when the guest is only adding new
PTEs
- Overhaul .sync_page() and .invlpg() to utilize .sync_page()'s
optimizations when emulating invalidations
- Clean up the range-based flushing APIs
- Revamp the TDP MMU's reaping of Accessed/Dirty bits to clear a
single A/D bit using a LOCK AND instead of XCHG, and skip all of
the "handle changed SPTE" overhead associated with writing the
entire entry
- Track the number of "tail" entries in a pte_list_desc to avoid
having to walk (potentially) all descriptors during insertion and
deletion, which gets quite expensive if the guest is spamming
fork()
- Disallow virtualizing legacy LBRs if architectural LBRs are
available, the two are mutually exclusive in hardware
- Disallow writes to immutable feature MSRs (notably
PERF_CAPABILITIES) after KVM_RUN, similar to CPUID features
- Overhaul the vmx_pmu_caps selftest to better validate
PERF_CAPABILITIES
- Apply PMU filters to emulated events and add test coverage to the
pmu_event_filter selftest
- AMD SVM:
- Add support for virtual NMIs
- Fixes for edge cases related to virtual interrupts
- Intel AMX:
- Don't advertise XTILE_CFG in KVM_GET_SUPPORTED_CPUID if
XTILE_DATA is not being reported due to userspace not opting in
via prctl()
- Fix a bug in emulation of ENCLS in compatibility mode
- Allow emulation of NOP and PAUSE for L2
- AMX selftests improvements
- Misc cleanups
MIPS:
- Constify MIPS's internal callbacks (a leftover from the hardware
enabling rework that landed in 6.3)
Generic:
- Drop unnecessary casts from "void *" throughout kvm_main.c
- Tweak the layout of "struct kvm_mmu_memory_cache" to shrink the
struct size by 8 bytes on 64-bit kernels by utilizing a padding
hole
Documentation:
- Fix goof introduced by the conversion to rST"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (211 commits)
KVM: s390: pci: fix virtual-physical confusion on module unload/load
KVM: s390: vsie: clarifications on setting the APCB
KVM: s390: interrupt: fix virtual-physical confusion for next alert GISA
KVM: arm64: Have kvm_psci_vcpu_on() use WRITE_ONCE() to update mp_state
KVM: arm64: Acquire mp_state_lock in kvm_arch_vcpu_ioctl_vcpu_init()
KVM: selftests: Test the PMU event "Instructions retired"
KVM: selftests: Copy full counter values from guest in PMU event filter test
KVM: selftests: Use error codes to signal errors in PMU event filter test
KVM: selftests: Print detailed info in PMU event filter asserts
KVM: selftests: Add helpers for PMC asserts in PMU event filter test
KVM: selftests: Add a common helper for the PMU event filter guest code
KVM: selftests: Fix spelling mistake "perrmited" -> "permitted"
KVM: arm64: vhe: Drop extra isb() on guest exit
KVM: arm64: vhe: Synchronise with page table walker on MMU update
KVM: arm64: pkvm: Document the side effects of kvm_flush_dcache_to_poc()
KVM: arm64: nvhe: Synchronise with page table walker on TLBI
KVM: arm64: Handle 32bit CNTPCTSS traps
KVM: arm64: nvhe: Synchronise with page table walker on vcpu run
KVM: arm64: vgic: Don't acquire its_lock before config_lock
KVM: selftests: Add test to verify KVM's supported XCR0
...
|
|
Common KVM changes for 6.4:
- Drop unnecessary casts from "void *" throughout kvm_main.c
- Tweak the layout of "struct kvm_mmu_memory_cache" to shrink the struct
size by 8 bytes on 64-bit kernels by utilizing a padding hole
- Fix a documentation format goof that was introduced when the KVM docs
were converted to ReST
- Constify MIPS's internal callbacks (a leftover from the hardware enabling
rework that landed in 6.3)
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD
KVM/arm64 updates for 6.4
- Numerous fixes for the pathological lock inversion issue that
plagued KVM/arm64 since... forever.
- New framework allowing SMCCC-compliant hypercalls to be forwarded
to userspace, hopefully paving the way for some more features
being moved to VMMs rather than be implemented in the kernel.
- Large rework of the timer code to allow a VM-wide offset to be
applied to both virtual and physical counters as well as a
per-timer, per-vcpu offset that complements the global one.
This last part allows the NV timer code to be implemented on
top.
- A small set of fixes to make sure that we don't change anything
affecting the EL1&0 translation regime just after having having
taken an exception to EL2 until we have executed a DSB. This
ensures that speculative walks started in EL1&0 have completed.
- The usual selftest fixes and improvements.
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 SEV updates from Borislav Petkov:
- Add the necessary glue so that the kernel can run as a confidential
SEV-SNP vTOM guest on Hyper-V. A vTOM guest basically splits the
address space in two parts: encrypted and unencrypted. The use case
being running unmodified guests on the Hyper-V confidential computing
hypervisor
- Double-buffer messages between the guest and the hardware PSP device
so that no partial buffers are copied back'n'forth and thus potential
message integrity and leak attacks are possible
- Name the return value the sev-guest driver returns when the hw PSP
device hasn't been called, explicitly
- Cleanups
* tag 'x86_sev_for_v6.4_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/hyperv: Change vTOM handling to use standard coco mechanisms
init: Call mem_encrypt_init() after Hyper-V hypercall init is done
x86/mm: Handle decryption/re-encryption of bss_decrypted consistently
Drivers: hv: Explicitly request decrypted in vmap_pfn() calls
x86/hyperv: Reorder code to facilitate future work
x86/ioremap: Add hypervisor callback for private MMIO mapping in coco VM
x86/sev: Change snp_guest_issue_request()'s fw_err argument
virt/coco/sev-guest: Double-buffer messages
crypto: ccp: Get rid of __sev_platform_init_locked()'s local function pointer
crypto: ccp - Name -1 return value as SEV_RET_NO_FW_CALL
|
|
Pull documentation updates from Jonathan Corbet:
"Commit volume in documentation is relatively low this time, but there
is still a fair amount going on, including:
- Reorganize the architecture-specific documentation under
Documentation/arch
This makes the structure match the source directory and helps to
clean up the mess that is the top-level Documentation directory a
bit. This work creates the new directory and moves x86 and most of
the less-active architectures there.
The current plan is to move the rest of the architectures in 6.5,
with the patches going through the appropriate subsystem trees.
- Some more Spanish translations and maintenance of the Italian
translation
- A new "Kernel contribution maturity model" document from Ted
- A new tutorial on quickly building a trimmed kernel from Thorsten
Plus the usual set of updates and fixes"
* tag 'docs-6.4' of git://git.lwn.net/linux: (47 commits)
media: Adjust column width for pdfdocs
media: Fix building pdfdocs
docs: clk: add documentation to log which clocks have been disabled
docs: trace: Fix typo in ftrace.rst
Documentation/process: always CC responsible lists
docs: kmemleak: adjust to config renaming
ELF: document some de-facto PT_* ABI quirks
Documentation: arm: remove stih415/stih416 related entries
docs: turn off "smart quotes" in the HTML build
Documentation: firmware: Clarify firmware path usage
docs/mm: Physical Memory: Fix grammar
Documentation: Add document for false sharing
dma-api-howto: typo fix
docs: move m68k architecture documentation under Documentation/arch/
docs: move parisc documentation under Documentation/arch/
docs: move ia64 architecture docs under Documentation/arch/
docs: Move arc architecture docs under Documentation/arch/
docs: move nios2 documentation under Documentation/arch/
docs: move openrisc documentation under Documentation/arch/
docs: move superh documentation under Documentation/arch/
...
|
|
ordering
as some vfio_device's open_device op requires kvm pointer and kvm pointer
set is part of GROUP_ADD.
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Signed-off-by: Yi Liu <yi.l.liu@intel.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/20230421053611.55839-1-yi.l.liu@intel.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
|
|
* kvm-arm64/smccc-filtering:
: .
: SMCCC call filtering and forwarding to userspace, courtesy of
: Oliver Upton. From the cover letter:
:
: "The Arm SMCCC is rather prescriptive in regards to the allocation of
: SMCCC function ID ranges. Many of the hypercall ranges have an
: associated specification from Arm (FF-A, PSCI, SDEI, etc.) with some
: room for vendor-specific implementations.
:
: The ever-expanding SMCCC surface leaves a lot of work within KVM for
: providing new features. Furthermore, KVM implements its own
: vendor-specific ABI, with little room for other implementations (like
: Hyper-V, for example). Rather than cramming it all into the kernel we
: should provide a way for userspace to handle hypercalls."
: .
KVM: selftests: Fix spelling mistake "KVM_HYPERCAL_EXIT_SMC" -> "KVM_HYPERCALL_EXIT_SMC"
KVM: arm64: Test that SMC64 arch calls are reserved
KVM: arm64: Prevent userspace from handling SMC64 arch range
KVM: arm64: Expose SMC/HVC width to userspace
KVM: selftests: Add test for SMCCC filter
KVM: selftests: Add a helper for SMCCC calls with SMC instruction
KVM: arm64: Let errors from SMCCC emulation to reach userspace
KVM: arm64: Return NOT_SUPPORTED to guest for unknown PSCI version
KVM: arm64: Introduce support for userspace SMCCC filtering
KVM: arm64: Add support for KVM_EXIT_HYPERCALL
KVM: arm64: Use a maple tree to represent the SMCCC filter
KVM: arm64: Refactor hvc filtering to support different actions
KVM: arm64: Start handling SMCs from EL1
KVM: arm64: Rename SMC/HVC call handler to reflect reality
KVM: arm64: Add vm fd device attribute accessors
KVM: arm64: Add a helper to check if a VM has ran once
KVM: x86: Redefine 'longmode' as a flag for KVM_EXIT_HYPERCALL
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
When returning to userspace to handle a SMCCC call, we consistently
set PC to point to the instruction immediately after the HVC/SMC.
However, should userspace need to know the exact address of the
trapping instruction, it needs to know about the *size* of that
instruction. For AArch64, this is pretty easy. For AArch32, this
is a bit more funky, as Thumb has 16bit encodings for both HVC
and SMC.
Expose this to userspace with a new flag that directly derives
from ESR_EL2.IL. Also update the documentation to reflect the PC
state at the point of exit.
Finally, this fixes a small buglet where the hypercall.{args,ret}
fields would not be cleared on exit, and could contain some
random junk.
Reviewed-by: Oliver Upton <oliver.upton@linux.dev>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/86pm8iv8tj.wl-maz@kernel.org
|
|
As the SMCCC (and related specifications) march towards an 'everything
and the kitchen sink' interface for interacting with a system it becomes
less likely that KVM will support every related feature. We could do
better by letting userspace have a crack at it instead.
Allow userspace to define an 'SMCCC filter' that applies to both HVCs
and SMCs initiated by the guest. Supporting both conduits with this
interface is important for a couple of reasons. Guest SMC usage is table
stakes for a nested guest, as HVCs are always taken to the virtual EL2.
Additionally, guests may want to interact with a service on the secure
side which can now be proxied by userspace.
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20230404154050.2270077-10-oliver.upton@linux.dev
|
|
In anticipation of user hypercall filters, add the necessary plumbing to
get SMCCC calls out to userspace. Even though the exit structure has
space for KVM to pass register arguments, let's just avoid it altogether
and let userspace poke at the registers via KVM_GET_ONE_REG.
This deliberately stretches the definition of a 'hypercall' to cover
SMCs from EL1 in addition to the HVCs we know and love. KVM doesn't
support EL1 calls into secure services, but now we can paint that as a
userspace problem and be done with it.
Finally, we need a flag to let userspace know what conduit instruction
was used (i.e. SMC vs. HVC).
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20230404154050.2270077-9-oliver.upton@linux.dev
|
|
The 'longmode' field is a bit annoying as it blows an entire __u32 to
represent a boolean value. Since other architectures are looking to add
support for KVM_EXIT_HYPERCALL, now is probably a good time to clean it
up.
Redefine the field (and the remaining padding) as a set of flags.
Preserve the existing ABI by using bit 0 to indicate if the guest was in
long mode and requiring that the remaining 31 bits must be zero.
Cc: Paolo Bonzini <pbonzini@redhat.com>
Acked-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20230404154050.2270077-2-oliver.upton@linux.dev
|
|
Add a missing ":" to fix a broken field list.
Signed-off-by: Takahiro Itazuri <itazur@amazon.com>
Fixes: ba7bb663f554 ("KVM: x86: Provide per VM capability for disabling PMU virtualization")
Message-Id: <20230331093116.99820-1-itazur@amazon.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Move the x86 documentation under Documentation/arch/ as a way of cleaning
up the top-level directory and making the structure of our docs more
closely match the structure of the source directories it describes.
All in-kernel references to the old paths have been updated.
Acked-by: Dave Hansen <dave.hansen@linux.intel.com>
Cc: linux-arch@vger.kernel.org
Cc: x86@kernel.org
Cc: Borislav Petkov <bp@alien8.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/lkml/20230315211523.108836-1-corbet@lwn.net/
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
|
|
Add some basic documentation on the effects of KVM_ARM_SET_CNT_OFFSETS.
Reviewed-by: Colton Lewis <coltonlewis@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20230330174800.2677007-16-maz@kernel.org
|
|
Fix stale comments that were left behind when install_new_memslots() was
replaced by kvm_swap_active_memslots() as part of the scalable memslots
rework.
Fixes: a54d806688fe ("KVM: Keep memslots in tree-based structures instead of array-based ones")
Signed-off-by: Jun Miao <jun.miao@intel.com>
Link: https://lore.kernel.org/r/20230223052851.1054799-1-jun.miao@intel.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
The 7.18 KVM_CAP_MANUAL_DIRTY_LOG_PROTECT2 now is not a title, make it
as a title to keep the format consistent.
Signed-off-by: Shaoqin Huang <shahuang@redhat.com>
Fixes: 106ee47dc633 ("docs: kvm: Convert api.txt to ReST format")
Reviewed-by: Sean Christopherson <seanjc@google.com>
Link: https://lore.kernel.org/r/20230220034910.11024-1-shahuang@redhat.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
The GHCB specification declares that the firmware error value for
a guest request will be stored in the lower 32 bits of EXIT_INFO_2. The
upper 32 bits are for the VMM's own error code. The fw_err argument to
snp_guest_issue_request() is thus a misnomer, and callers will need
access to all 64 bits.
The type of unsigned long also causes problems, since sw_exit_info2 is
u64 (unsigned long long) vs the argument's unsigned long*. Change this
type for issuing the guest request. Pass the ioctl command struct's error
field directly instead of in a local variable, since an incomplete guest
request may not set the error code, and uninitialized stack memory would
be written back to user space.
The firmware might not even be called, so bookend the call with the no
firmware call error and clear the error.
Since the "fw_err" field is really exitinfo2 split into the upper bits'
vmm error code and lower bits' firmware error code, convert the 64 bit
value to a union.
[ bp:
- Massage commit message
- adjust code
- Fix a build issue as
Reported-by: kernel test robot <lkp@intel.com>
Link: https://lore.kernel.org/oe-kbuild-all/202303070609.vX6wp2Af-lkp@intel.com
- print exitinfo2 in hex
Tom:
- Correct -EIO exit case. ]
Signed-off-by: Dionna Glaze <dionnaglaze@google.com>
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/20230214164638.1189804-5-dionnaglaze@google.com
Link: https://lore.kernel.org/r/20230307192449.24732-12-bp@alien8.de
|
|
The PSP can return a "firmware error" code of -1 in circumstances where
the PSP has not actually been called. To make this protocol unambiguous,
name the value SEV_RET_NO_FW_CALL.
[ bp: Massage a bit. ]
Signed-off-by: Peter Gonda <pgonda@google.com>
Signed-off-by: Dionna Glaze <dionnaglaze@google.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/20221207010210.2563293-2-dionnaglaze@google.com
|
|
In case of success, this function returns the amount of handled bytes.
However, this does not work for large values: The function is called
from kvm_arch_vm_ioctl() (which still returns a long), which in turn
is called from kvm_vm_ioctl() in virt/kvm/kvm_main.c. And that function
stores the return value in an "int r" variable. So the upper 32-bits
of the "long" return value are lost there.
KVM ioctl functions should only return "int" values, so let's limit
the amount of bytes that can be requested here to INT_MAX to avoid
the problem with the truncated return value. We can then also change
the return type of the function to "int" to make it clearer that it
is not possible to return a "long" here.
Fixes: f0376edb1ddc ("KVM: arm64: Add ioctl to fetch/store tags in a guest")
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Gavin Shan <gshan@redhat.com>
Reviewed-by: Steven Price <steven.price@arm.com>
Message-Id: <20230208140105.655814-5-thuth@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Pull kvm updates from Paolo Bonzini:
"ARM:
- Provide a virtual cache topology to the guest to avoid
inconsistencies with migration on heterogenous systems. Non secure
software has no practical need to traverse the caches by set/way in
the first place
- Add support for taking stage-2 access faults in parallel. This was
an accidental omission in the original parallel faults
implementation, but should provide a marginal improvement to
machines w/o FEAT_HAFDBS (such as hardware from the fruit company)
- A preamble to adding support for nested virtualization to KVM,
including vEL2 register state, rudimentary nested exception
handling and masking unsupported features for nested guests
- Fixes to the PSCI relay that avoid an unexpected host SVE trap when
resuming a CPU when running pKVM
- VGIC maintenance interrupt support for the AIC
- Improvements to the arch timer emulation, primarily aimed at
reducing the trap overhead of running nested
- Add CONFIG_USERFAULTFD to the KVM selftests config fragment in the
interest of CI systems
- Avoid VM-wide stop-the-world operations when a vCPU accesses its
own redistributor
- Serialize when toggling CPACR_EL1.SMEN to avoid unexpected
exceptions in the host
- Aesthetic and comment/kerneldoc fixes
- Drop the vestiges of the old Columbia mailing list and add [Oliver]
as co-maintainer
RISC-V:
- Fix wrong usage of PGDIR_SIZE instead of PUD_SIZE
- Correctly place the guest in S-mode after redirecting a trap to the
guest
- Redirect illegal instruction traps to guest
- SBI PMU support for guest
s390:
- Sort out confusion between virtual and physical addresses, which
currently are the same on s390
- A new ioctl that performs cmpxchg on guest memory
- A few fixes
x86:
- Change tdp_mmu to a read-only parameter
- Separate TDP and shadow MMU page fault paths
- Enable Hyper-V invariant TSC control
- Fix a variety of APICv and AVIC bugs, some of them real-world, some
of them affecting architecurally legal but unlikely to happen in
practice
- Mark APIC timer as expired if its in one-shot mode and the count
underflows while the vCPU task was being migrated
- Advertise support for Intel's new fast REP string features
- Fix a double-shootdown issue in the emergency reboot code
- Ensure GIF=1 and disable SVM during an emergency reboot, i.e. give
SVM similar treatment to VMX
- Update Xen's TSC info CPUID sub-leaves as appropriate
- Add support for Hyper-V's extended hypercalls, where "support" at
this point is just forwarding the hypercalls to userspace
- Clean up the kvm->lock vs. kvm->srcu sequences when updating the
PMU and MSR filters
- One-off fixes and cleanups
- Fix and cleanup the range-based TLB flushing code, used when KVM is
running on Hyper-V
- Add support for filtering PMU events using a mask. If userspace
wants to restrict heavily what events the guest can use, it can now
do so without needing an absurd number of filter entries
- Clean up KVM's handling of "PMU MSRs to save", especially when vPMU
support is disabled
- Add PEBS support for Intel Sapphire Rapids
- Fix a mostly benign overflow bug in SEV's
send|receive_update_data()
- Move several SVM-specific flags into vcpu_svm
x86 Intel:
- Handle NMI VM-Exits before leaving the noinstr region
- A few trivial cleanups in the VM-Enter flows
- Stop enabling VMFUNC for L1 purely to document that KVM doesn't
support EPTP switching (or any other VM function) for L1
- Fix a crash when using eVMCS's enlighted MSR bitmaps
Generic:
- Clean up the hardware enable and initialization flow, which was
scattered around multiple arch-specific hooks. Instead, just let
the arch code call into generic code. Both x86 and ARM should
benefit from not having to fight common KVM code's notion of how to
do initialization
- Account allocations in generic kvm_arch_alloc_vm()
- Fix a memory leak if coalesced MMIO unregistration fails
selftests:
- On x86, cache the CPU vendor (AMD vs. Intel) and use the info to
emit the correct hypercall instruction instead of relying on KVM to
patch in VMMCALL
- Use TAP interface for kvm_binary_stats_test and tsc_msrs_test"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (325 commits)
KVM: SVM: hyper-v: placate modpost section mismatch error
KVM: x86/mmu: Make tdp_mmu_allowed static
KVM: arm64: nv: Use reg_to_encoding() to get sysreg ID
KVM: arm64: nv: Only toggle cache for virtual EL2 when SCTLR_EL2 changes
KVM: arm64: nv: Filter out unsupported features from ID regs
KVM: arm64: nv: Emulate EL12 register accesses from the virtual EL2
KVM: arm64: nv: Allow a sysreg to be hidden from userspace only
KVM: arm64: nv: Emulate PSTATE.M for a guest hypervisor
KVM: arm64: nv: Add accessors for SPSR_EL1, ELR_EL1 and VBAR_EL1 from virtual EL2
KVM: arm64: nv: Handle SMCs taken from virtual EL2
KVM: arm64: nv: Handle trapped ERET from virtual EL2
KVM: arm64: nv: Inject HVC exceptions to the virtual EL2
KVM: arm64: nv: Support virtual EL2 exceptions
KVM: arm64: nv: Handle HCR_EL2.NV system register traps
KVM: arm64: nv: Add nested virt VCPU primitives for vEL2 VCPU state
KVM: arm64: nv: Add EL2 system registers to vcpu context
KVM: arm64: nv: Allow userspace to set PSR_MODE_EL2x
KVM: arm64: nv: Reset VCPU to EL2 registers if VCPU nested virt is set
KVM: arm64: nv: Introduce nested virtualization VCPU feature
KVM: arm64: Use the S2 MMU context to iterate over S2 table
...
|
|
Pull documentation updates from Jonathan Corbet:
"It has been a moderately calm cycle for documentation; the significant
changes include:
- Some significant additions to the memory-management documentation
- Some improvements to navigation in the HTML-rendered docs
- More Spanish and Chinese translations
... and the usual set of typo fixes and such"
* tag 'docs-6.3' of git://git.lwn.net/linux: (68 commits)
Documentation/watchdog/hpwdt: Fix Format
Documentation/watchdog/hpwdt: Fix Reference
Documentation: core-api: padata: correct spelling
docs/mm: Physical Memory: correct spelling in reference to CONFIG_PAGE_EXTENSION
docs: Use HTML comments for the kernel-toc SPDX line
docs: Add more information to the HTML sidebar
Documentation: KVM: Update AMD memory encryption link
printk: Document that CONFIG_BOOT_PRINTK_DELAY required for boot_delay=
Documentation: userspace-api: correct spelling
Documentation: sparc: correct spelling
Documentation: driver-api: correct spelling
Documentation: admin-guide: correct spelling
docs: add workload-tracing document to admin-guide
docs/admin-guide/mm: remove useless markup
docs/mm: remove useless markup
docs/mm: Physical Memory: remove useless markup
docs/sp_SP: Add process magic-number translation
docs: ftrace: always use canonical ftrace path
Doc/damon: fix the data path error
dma-buf: Add "dma-buf" to title of documentation
...
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/kvms390/linux into HEAD
* Two more V!=R patches
* The last part of the cmpxchg patches
* A few fixes
|
|
KVM/riscv changes for 6.3
- Fix wrong usage of PGDIR_SIZE to check page sizes
- Fix privilege mode setting in kvm_riscv_vcpu_trap_redirect()
- Redirect illegal instruction traps to guest
- SBI PMU support for guest
|
|
Describe the semantics of the new KVM_S390_MEMOP_F_CMPXCHG flag for
absolute vm write memops which allows user space to perform (storage key
checked) cmpxchg operations on guest memory.
Signed-off-by: Janis Schoetterl-Glausch <scgl@linux.ibm.com>
Reviewed-by: Janosch Frank <frankja@linux.ibm.com>
Link: https://lore.kernel.org/r/20230206164602.138068-14-scgl@linux.ibm.com
Message-Id: <20230206164602.138068-14-scgl@linux.ibm.com>
[frankja@de.ibm.com: Removed a line from an earlier version]
Signed-off-by: Janosch Frank <frankja@linux.ibm.com>
|
|
Migration mode is a VM attribute which enables tracking of changes in
storage attributes (PGSTE). It assumes dirty tracking is enabled on all
memslots to keep a dirty bitmap of pages with changed storage attributes.
When enabling migration mode, we currently check that dirty tracking is
enabled for all memslots. However, userspace can disable dirty tracking
without disabling migration mode.
Since migration mode is pointless with dirty tracking disabled, disable
migration mode whenever userspace disables dirty tracking on any slot.
Also update the documentation to clarify that dirty tracking must be
enabled when enabling migration mode, which is already enforced by the
code in kvm_s390_vm_start_migration().
Also highlight in the documentation for KVM_S390_GET_CMMA_BITS that it
can now fail with -EINVAL when dirty tracking is disabled while
migration mode is on. Move all the error codes to a table so this stays
readable.
To disable migration mode, slots_lock should be held, which is taken
in kvm_set_memory_region() and thus held in
kvm_arch_prepare_memory_region().
Restructure the prepare code a bit so all the sanity checking is done
before disabling migration mode. This ensures migration mode isn't
disabled when some sanity check fails.
Cc: stable@vger.kernel.org
Fixes: 190df4a212a7 ("KVM: s390: CMMA tracking, ESSA emulation, migration mode")
Signed-off-by: Nico Boehr <nrb@linux.ibm.com>
Reviewed-by: Janosch Frank <frankja@linux.ibm.com>
Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Link: https://lore.kernel.org/r/20230127140532.230651-2-nrb@linux.ibm.com
Message-Id: <20230127140532.230651-2-nrb@linux.ibm.com>
[frankja@linux.ibm.com: fixed commit message typo, moved api.rst error table upwards]
Signed-off-by: Janosch Frank <frankja@linux.ibm.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD
KVM/arm64 fixes for 6.2, take #3
- Yet another fix for non-CPU accesses to the memory backing
the VGICv3 subsystem
- A set of fixes for the setlftest checking for the S1PTW
behaviour after the fix that went in ealier in the cycle
|
|
Update AMD memory encryption white-paper document link.
Previous link is not available. Update new available link.
Signed-off-by: Wyes Karny <wyes.karny@amd.com>
Reviewed-by: Carlos Bilbao <carlos.bilbao@amd.com>
Link: https://lore.kernel.org/r/20230125175948.21100-1-wyes.karny@amd.com
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
|
|
We don't have a running VCPU context to save vgic3 pending table due
to KVM_DEV_ARM_VGIC_{GRP_CTRL, SAVE_PENDING_TABLES} command on KVM
device "kvm-arm-vgic-v3". The unknown case is caught by kvm-unit-tests.
# ./kvm-unit-tests/tests/its-pending-migration
WARNING: CPU: 120 PID: 7973 at arch/arm64/kvm/../../../virt/kvm/kvm_main.c:3325 \
mark_page_dirty_in_slot+0x60/0xe0
:
mark_page_dirty_in_slot+0x60/0xe0
__kvm_write_guest_page+0xcc/0x100
kvm_write_guest+0x7c/0xb0
vgic_v3_save_pending_tables+0x148/0x2a0
vgic_set_common_attr+0x158/0x240
vgic_v3_set_attr+0x4c/0x5c
kvm_device_ioctl+0x100/0x160
__arm64_sys_ioctl+0xa8/0xf0
invoke_syscall.constprop.0+0x7c/0xd0
el0_svc_common.constprop.0+0x144/0x160
do_el0_svc+0x34/0x60
el0_svc+0x3c/0x1a0
el0t_64_sync_handler+0xb4/0x130
el0t_64_sync+0x178/0x17c
Use vgic_write_guest_lock() to save vgic3 pending table.
Reported-by: Zenghui Yu <yuzenghui@huawei.com>
Signed-off-by: Gavin Shan <gshan@redhat.com>
Reviewed-by: Oliver Upton <oliver.upton@linux.dev>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20230126235451.469087-5-gshan@redhat.com
|
|
We don't have a running VCPU context to restore vgic3 LPI pending status
due to command KVM_DEV_ARM_{VGIC_GRP_CTRL, ITS_RESTORE_TABLES} on KVM
device "kvm-arm-vgic-its".
Use vgic_write_guest_lock() to restore vgic3 LPI pending status.
Signed-off-by: Gavin Shan <gshan@redhat.com>
Reviewed-by: Oliver Upton <oliver.upton@linux.dev>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20230126235451.469087-4-gshan@redhat.com
|
|
change "gues" to "guest" and remove redundant ")".
Signed-off-by: Wang Yong <yongw.kernel@gmail.com>
Reviewed-by: Kashyap Chamarthy <kchamart@redhat.com>
Link: https://lore.kernel.org/r/20230110150046.549755-1-yongw.kernel@gmail.com
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
|
|
documents
Some documents that listed on subsystem-apis have 'Linux' or 'The Linux'
title prefixes. It's duplicated information, and makes finding the
document of interest with human eyes not easy. Remove the prefixes from
the titles.
Signed-off-by: SeongJae Park <sj@kernel.org>
Acked-by: Iwona Winiarska <iwona.winiarska@intel.com>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Link: https://lore.kernel.org/r/20230122184834.181977-1-sj@kernel.org
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
|
|
When building a list of filter events, it can sometimes be a challenge
to fit all the events needed to adequately restrict the guest into the
limited space available in the pmu event filter. This stems from the
fact that the pmu event filter requires each event (i.e. event select +
unit mask) be listed, when the intention might be to restrict the
event select all together, regardless of it's unit mask. Instead of
increasing the number of filter events in the pmu event filter, add a
new encoding that is able to do a more generalized match on the unit mask.
Introduce masked events as another encoding the pmu event filter
understands. Masked events has the fields: mask, match, and exclude.
When filtering based on these events, the mask is applied to the guest's
unit mask to see if it matches the match value (i.e. umask & mask ==
match). The exclude bit can then be used to exclude events from that
match. E.g. for a given event select, if it's easier to say which unit
mask values shouldn't be filtered, a masked event can be set up to match
all possible unit mask values, then another masked event can be set up to
match the unit mask values that shouldn't be filtered.
Userspace can query to see if this feature exists by looking for the
capability, KVM_CAP_PMU_EVENT_MASKED_EVENTS.
This feature is enabled by setting the flags field in the pmu event
filter to KVM_PMU_EVENT_FLAG_MASKED_EVENTS.
Events can be encoded by using KVM_PMU_ENCODE_MASKED_ENTRY().
It is an error to have a bit set outside the valid bits for a masked
event, and calls to KVM_SET_PMU_EVENT_FILTER will return -EINVAL in
such cases, including the high bits of the event select (35:32) if
called on Intel.
With these updates the filter matching code has been updated to match on
a common event. Masked events were flexible enough to handle both event
types, so they were used as the common event. This changes how guest
events get filtered because regardless of the type of event used in the
uAPI, they will be converted to masked events. Because of this there
could be a slight performance hit because instead of matching the filter
event with a lookup on event select + unit mask, it does a lookup on event
select then walks the unit masks to find the match. This shouldn't be a
big problem because I would expect the set of common event selects to be
small, and if they aren't the set can likely be reduced by using masked
events to generalize the unit mask. Using one type of event when
filtering guest events allows for a common code path to be used.
Signed-off-by: Aaron Lewis <aaronlewis@google.com>
Link: https://lore.kernel.org/r/20221220161236.555143-5-aaronlewis@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
The first half or so patches fix semi-urgent, real-world relevant APICv
and AVIC bugs.
The second half fixes a variety of AVIC and optimized APIC map bugs
where KVM doesn't play nice with various edge cases that are
architecturally legal(ish), but are unlikely to occur in most real world
scenarios
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
ARM:
* Fix the PMCR_EL0 reset value after the PMU rework
* Correctly handle S2 fault triggered by a S1 page table walk
by not always classifying it as a write, as this breaks on
R/O memslots
* Document why we cannot exit with KVM_EXIT_MMIO when taking
a write fault from a S1 PTW on a R/O memslot
* Put the Apple M2 on the naughty list for not being able to
correctly implement the vgic SEIS feature, just like the M1
before it
* Reviewer updates: Alex is stepping down, replaced by Zenghui
x86:
* Fix various rare locking issues in Xen emulation and teach lockdep
to detect them
* Documentation improvements
* Do not return host topology information from KVM_GET_SUPPORTED_CPUID
|
|
Apply KVM's hotplug hack if and only if userspace has enabled 32-bit IDs
for x2APIC. If 32-bit IDs are not enabled, disable the optimized map to
honor x86 architectural behavior if multiple vCPUs shared a physical APIC
ID. As called out in the changelog that added the hack, all CPUs whose
(possibly truncated) APIC ID matches the target are supposed to receive
the IPI.
KVM intentionally differs from real hardware, because real hardware
(Knights Landing) does just "x2apic_id & 0xff" to decide whether to
accept the interrupt in xAPIC mode and it can deliver one interrupt to
more than one physical destination, e.g. 0x123 to 0x123 and 0x23.
Applying the hack even when x2APIC is not fully enabled means KVM doesn't
correctly handle scenarios where the guest has aliased xAPIC IDs across
multiple vCPUs, as only the vCPU with the lowest vCPU ID will receive any
interrupts. It's extremely unlikely any real world guest aliases APIC
IDs, or even modifies APIC IDs, but KVM's behavior is arbitrary, e.g. the
lowest vCPU ID "wins" regardless of which vCPU is "aliasing" and which
vCPU is "normal".
Furthermore, the hack is _not_ guaranteed to work! The hack works if and
only if the optimized APIC map is successfully allocated. If the map
allocation fails (unlikely), KVM will fall back to its unoptimized
behavior, which _does_ honor the architectural behavior.
Pivot on 32-bit x2APIC IDs being enabled as that is required to take
advantage of the hotplug hack (see kvm_apic_state_fixup()), i.e. won't
break existing setups unless they are way, way off in the weeds.
And an entry in KVM's errata to document the hack. Alternatively, KVM
could provide an actual x2APIC quirk and document the hack that way, but
there's unlikely to ever be a use case for disabling the quirk. Go the
errata route to avoid having to validate a quirk no one cares about.
Fixes: 5bd5db385b3e ("KVM: x86: allow hotplug of VCPU with APIC ID over 0xff")
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20230106011306.85230-23-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
In commit 14243b387137a ("KVM: x86/xen: Add KVM_IRQ_ROUTING_XEN_EVTCHN
and event channel delivery") the clever version of me left some helpful
notes for those who would come after him:
/*
* For the irqfd workqueue, using the main kvm->lock mutex is
* fine since this function is invoked from kvm_set_irq() with
* no other lock held, no srcu. In future if it will be called
* directly from a vCPU thread (e.g. on hypercall for an IPI)
* then it may need to switch to using a leaf-node mutex for
* serializing the shared_info mapping.
*/
mutex_lock(&kvm->lock);
In commit 2fd6df2f2b47 ("KVM: x86/xen: intercept EVTCHNOP_send from guests")
the other version of me ran straight past that comment without reading it,
and introduced a potential deadlock by taking vcpu->mutex and kvm->lock
in the wrong order.
Solve this as originally suggested, by adding a leaf-node lock in the Xen
state rather than using kvm->lock for it.
Fixes: 2fd6df2f2b47 ("KVM: x86/xen: intercept EVTCHNOP_send from guests")
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Message-Id: <20230111180651.14394-4-dwmw2@infradead.org>
[Rebase, add docs. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into kvm-master
KVM/arm64 fixes for 6.2, take #1
- Fix the PMCR_EL0 reset value after the PMU rework
- Correctly handle S2 fault triggered by a S1 page table walk
by not always classifying it as a write, as this breaks on
R/O memslots
- Document why we cannot exit with KVM_EXIT_MMIO when taking
a write fault from a S1 PTW on a R/O memslot
- Put the Apple M2 on the naughty step for not being able to
correctly implement the vgic SEIS feature, just liek the M1
before it
- Reviewer updates: Alex is stepping down, replaced by Zenghui
|
|
kvm->srcu is taken in KVM_RUN and several other vCPU ioctls, therefore
vcpu->mutex is susceptible to the same deadlock that is documented
for kvm->slots_lock. The same holds for kvm->lock, since kvm->lock
is held outside vcpu->mutex. Fix the documentation and rearrange it
to highlight the difference between these locks and kvm->slots_arch_lock,
and how kvm->slots_arch_lock can be useful while processing a vmexit.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Passing the host topology to the guest is almost certainly wrong
and will confuse the scheduler. In addition, several fields of
these CPUID leaves vary on each processor; it is simply impossible to
return the right values from KVM_GET_SUPPORTED_CPUID in such a way that
they can be passed to KVM_SET_CPUID2.
The values that will most likely prevent confusion are all zeroes.
Userspace will have to override it anyway if it wishes to present a
specific topology to the guest.
Cc: stable@vger.kernel.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
* kvm-arm64/s1ptw-write-fault:
: .
: Fix S1PTW fault handling that was until then always taken
: as a write. From the cover letter:
:
: `Recent developments on the EFI front have resulted in guests that
: simply won't boot if the page tables are in a read-only memslot and
: that you're a bit unlucky in the way S2 gets paged in... The core
: issue is related to the fact that we treat a S1PTW as a write, which
: is close enough to what needs to be done. Until to get to RO memslots.
:
: The first patch fixes this and is definitely a stable candidate. It
: splits the faulting of page tables in two steps (RO translation fault,
: followed by a writable permission fault -- should it even happen).
: The second one documents the slightly odd behaviour of PTW writes to
: RO memslot, which do not result in a KVM_MMIO exit. The last patch is
: totally optional, only tangentially related, and randomly repainting
: stuff (maybe that's contagious, who knows)."
:
: .
KVM: arm64: Convert FSC_* over to ESR_ELx_FSC_*
KVM: arm64: Document the behaviour of S1PTW faults on RO memslots
KVM: arm64: Fix S1PTW handling on RO memslots
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
Although the KVM API says that a write to a RO memslot must result
in a KVM_EXIT_MMIO describing the write, the arm64 architecture
doesn't provide the *data* written by a Stage-1 page table walk
(we only get the address).
Since there isn't much userspace can do with so little information
anyway, document the fact that such an access results in a guest
exception, not an exit. This is consistent with the guest being
terminally broken anyway.
Reviewed-by: Oliver Upton <oliver.upton@linux.dev>
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
Drop kvm_count_lock and instead protect kvm_usage_count with kvm_lock now
that KVM hooks CPU hotplug during the ONLINE phase, which can sleep.
Previously, KVM hooked the STARTING phase, which is not allowed to sleep
and thus could not take kvm_lock (a mutex). This effectively allows the
task that's initiating hardware enabling/disabling to preempted and/or
migrated.
Note, the Documentation/virt/kvm/locking.rst statement that kvm_count_lock
is "raw" because hardware enabling/disabling needs to be atomic with
respect to migration is wrong on multiple fronts. First, while regular
spinlocks can be preempted, the task holding the lock cannot be migrated.
Second, preventing migration is not required. on_each_cpu() disables
preemption, which ensures that cpus_hardware_enabled correctly reflects
hardware state. The task may be preempted/migrated between bumping
kvm_usage_count and invoking on_each_cpu(), but that's perfectly ok as
kvm_usage_count is still protected, e.g. other tasks that call
hardware_enable_all() will be blocked until the preempted/migrated owner
exits its critical section.
KVM does have lockless accesses to kvm_usage_count in the suspend/resume
flows, but those are safe because all tasks must be frozen prior to
suspending CPUs, and a task cannot be frozen while it holds one or more
locks (userspace tasks are frozen via a fake signal).
Preemption doesn't need to be explicitly disabled in the hotplug path.
The hotplug thread is pinned to the CPU that's being hotplugged, and KVM
only cares about having a stable CPU, i.e. to ensure hardware is enabled
on the correct CPU. Lockep, i.e. check_preemption_disabled(), plays nice
with this state too, as is_percpu_thread() is true for the hotplug thread.
Signed-off-by: Isaku Yamahata <isaku.yamahata@intel.com>
Co-developed-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20221130230934.1014142-45-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Acquire a new mutex, vendor_module_lock, in kvm_x86_vendor_init() while
doing hardware setup to ensure that concurrent calls are fully serialized.
KVM rejects attempts to load vendor modules if a different module has
already been loaded, but doesn't handle the case where multiple vendor
modules are loaded at the same time, and module_init() doesn't run under
the global module_mutex.
Note, in practice, this is likely a benign bug as no platform exists that
supports both SVM and VMX, i.e. barring a weird VM setup, one of the
vendor modules is guaranteed to fail a support check before modifying
common KVM state.
Alternatively, KVM could perform an atomic CMPXCHG on .hardware_enable,
but that comes with its own ugliness as it would require setting
.hardware_enable before success is guaranteed, e.g. attempting to load
the "wrong" could result in spurious failure to load the "right" module.
Introduce a new mutex as using kvm_lock is extremely deadlock prone due
to kvm_lock being taken under cpus_write_lock(), and in the future, under
under cpus_read_lock(). Any operation that takes cpus_read_lock() while
holding kvm_lock would potentially deadlock, e.g. kvm_timer_init() takes
cpus_read_lock() to register a callback. In theory, KVM could avoid
such problematic paths, i.e. do less setup under kvm_lock, but avoiding
all calls to cpus_read_lock() is subtly difficult and thus fragile. E.g.
updating static calls also acquires cpus_read_lock().
Inverting the lock ordering, i.e. always taking kvm_lock outside
cpus_read_lock(), is not a viable option as kvm_lock is taken in various
callbacks that may be invoked under cpus_read_lock(), e.g. x86's
kvmclock_cpufreq_notifier().
The lockdep splat below is dependent on future patches to take
cpus_read_lock() in hardware_enable_all(), but as above, deadlock is
already is already possible.
======================================================
WARNING: possible circular locking dependency detected
6.0.0-smp--7ec93244f194-init2 #27 Tainted: G O
------------------------------------------------------
stable/251833 is trying to acquire lock:
ffffffffc097ea28 (kvm_lock){+.+.}-{3:3}, at: hardware_enable_all+0x1f/0xc0 [kvm]
but task is already holding lock:
ffffffffa2456828 (cpu_hotplug_lock){++++}-{0:0}, at: hardware_enable_all+0xf/0xc0 [kvm]
which lock already depends on the new lock.
the existing dependency chain (in reverse order) is:
-> #1 (cpu_hotplug_lock){++++}-{0:0}:
cpus_read_lock+0x2a/0xa0
__cpuhp_setup_state+0x2b/0x60
__kvm_x86_vendor_init+0x16a/0x1870 [kvm]
kvm_x86_vendor_init+0x23/0x40 [kvm]
0xffffffffc0a4d02b
do_one_initcall+0x110/0x200
do_init_module+0x4f/0x250
load_module+0x1730/0x18f0
__se_sys_finit_module+0xca/0x100
__x64_sys_finit_module+0x1d/0x20
do_syscall_64+0x3d/0x80
entry_SYSCALL_64_after_hwframe+0x63/0xcd
-> #0 (kvm_lock){+.+.}-{3:3}:
__lock_acquire+0x16f4/0x30d0
lock_acquire+0xb2/0x190
__mutex_lock+0x98/0x6f0
mutex_lock_nested+0x1b/0x20
hardware_enable_all+0x1f/0xc0 [kvm]
kvm_dev_ioctl+0x45e/0x930 [kvm]
__se_sys_ioctl+0x77/0xc0
__x64_sys_ioctl+0x1d/0x20
do_syscall_64+0x3d/0x80
entry_SYSCALL_64_after_hwframe+0x63/0xcd
other info that might help us debug this:
Possible unsafe locking scenario:
CPU0 CPU1
---- ----
lock(cpu_hotplug_lock);
lock(kvm_lock);
lock(cpu_hotplug_lock);
lock(kvm_lock);
*** DEADLOCK ***
1 lock held by stable/251833:
#0: ffffffffa2456828 (cpu_hotplug_lock){++++}-{0:0}, at: hardware_enable_all+0xf/0xc0 [kvm]
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20221130230934.1014142-16-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
x86:
* Change tdp_mmu to a read-only parameter
* Separate TDP and shadow MMU page fault paths
* Enable Hyper-V invariant TSC control
selftests:
* Use TAP interface for kvm_binary_stats_test and tsc_msrs_test
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
x86:
* several fixes to nested VMX execution controls
* fixes and clarification to the documentation for Xen emulation
* do not unnecessarily release a pmu event with zero period
* MMU fixes
* fix Coverity warning in kvm_hv_flush_tlb()
selftests:
* fixes for the ucall mechanism in selftests
* other fixes mostly related to compilation with clang
|
|
Currently only the locking order of SRCU vs kvm->slots_arch_lock
and kvm->slots_lock is documented. Extend this to kvm->lock
since Xen emulation got it terribly wrong.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Most notably, the KVM_XEN_EVTCHN_RESET feature had escaped documentation
entirely. Along with how to turn most stuff off on SHUTDOWN_soft_reset.
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Message-Id: <20221226120320.1125390-6-dwmw2@infradead.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Delete an extra block of code/documentation that snuck in when KVM's
documentation was converted to ReST format.
Fixes: 106ee47dc633 ("docs: kvm: Convert api.txt to ReST format")
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20221207003637.2041211-1-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Pull kvm updates from Paolo Bonzini:
"ARM64:
- Enable the per-vcpu dirty-ring tracking mechanism, together with an
option to keep the good old dirty log around for pages that are
dirtied by something other than a vcpu.
- Switch to the relaxed parallel fault handling, using RCU to delay
page table reclaim and giving better performance under load.
- Relax the MTE ABI, allowing a VMM to use the MAP_SHARED mapping
option, which multi-process VMMs such as crosvm rely on (see merge
commit 382b5b87a97d: "Fix a number of issues with MTE, such as
races on the tags being initialised vs the PG_mte_tagged flag as
well as the lack of support for VM_SHARED when KVM is involved.
Patches from Catalin Marinas and Peter Collingbourne").
- Merge the pKVM shadow vcpu state tracking that allows the
hypervisor to have its own view of a vcpu, keeping that state
private.
- Add support for the PMUv3p5 architecture revision, bringing support
for 64bit counters on systems that support it, and fix the
no-quite-compliant CHAIN-ed counter support for the machines that
actually exist out there.
- Fix a handful of minor issues around 52bit VA/PA support (64kB
pages only) as a prefix of the oncoming support for 4kB and 16kB
pages.
- Pick a small set of documentation and spelling fixes, because no
good merge window would be complete without those.
s390:
- Second batch of the lazy destroy patches
- First batch of KVM changes for kernel virtual != physical address
support
- Removal of a unused function
x86:
- Allow compiling out SMM support
- Cleanup and documentation of SMM state save area format
- Preserve interrupt shadow in SMM state save area
- Respond to generic signals during slow page faults
- Fixes and optimizations for the non-executable huge page errata
fix.
- Reprogram all performance counters on PMU filter change
- Cleanups to Hyper-V emulation and tests
- Process Hyper-V TLB flushes from a nested guest (i.e. from a L2
guest running on top of a L1 Hyper-V hypervisor)
- Advertise several new Intel features
- x86 Xen-for-KVM:
- Allow the Xen runstate information to cross a page boundary
- Allow XEN_RUNSTATE_UPDATE flag behaviour to be configured
- Add support for 32-bit guests in SCHEDOP_poll
- Notable x86 fixes and cleanups:
- One-off fixes for various emulation flows (SGX, VMXON, NRIPS=0).
- Reinstate IBPB on emulated VM-Exit that was incorrectly dropped
a few years back when eliminating unnecessary barriers when
switching between vmcs01 and vmcs02.
- Clean up vmread_error_trampoline() to make it more obvious that
params must be passed on the stack, even for x86-64.
- Let userspace set all supported bits in MSR_IA32_FEAT_CTL
irrespective of the current guest CPUID.
- Fudge around a race with TSC refinement that results in KVM
incorrectly thinking a guest needs TSC scaling when running on a
CPU with a constant TSC, but no hardware-enumerated TSC
frequency.
- Advertise (on AMD) that the SMM_CTL MSR is not supported
- Remove unnecessary exports
Generic:
- Support for responding to signals during page faults; introduces
new FOLL_INTERRUPTIBLE flag that was reviewed by mm folks
Selftests:
- Fix an inverted check in the access tracking perf test, and restore
support for asserting that there aren't too many idle pages when
running on bare metal.
- Fix build errors that occur in certain setups (unsure exactly what
is unique about the problematic setup) due to glibc overriding
static_assert() to a variant that requires a custom message.
- Introduce actual atomics for clear/set_bit() in selftests
- Add support for pinning vCPUs in dirty_log_perf_test.
- Rename the so called "perf_util" framework to "memstress".
- Add a lightweight psuedo RNG for guest use, and use it to randomize
the access pattern and write vs. read percentage in the memstress
tests.
- Add a common ucall implementation; code dedup and pre-work for
running SEV (and beyond) guests in selftests.
- Provide a common constructor and arch hook, which will eventually
be used by x86 to automatically select the right hypercall (AMD vs.
Intel).
- A bunch of added/enabled/fixed selftests for ARM64, covering
memslots, breakpoints, stage-2 faults and access tracking.
- x86-specific selftest changes:
- Clean up x86's page table management.
- Clean up and enhance the "smaller maxphyaddr" test, and add a
related test to cover generic emulation failure.
- Clean up the nEPT support checks.
- Add X86_PROPERTY_* framework to retrieve multi-bit CPUID values.
- Fix an ordering issue in the AMX test introduced by recent
conversions to use kvm_cpu_has(), and harden the code to guard
against similar bugs in the future. Anything that tiggers
caching of KVM's supported CPUID, kvm_cpu_has() in this case,
effectively hides opt-in XSAVE features if the caching occurs
before the test opts in via prctl().
Documentation:
- Remove deleted ioctls from documentation
- Clean up the docs for the x86 MSR filter.
- Various fixes"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (361 commits)
KVM: x86: Add proper ReST tables for userspace MSR exits/flags
KVM: selftests: Allocate ucall pool from MEM_REGION_DATA
KVM: arm64: selftests: Align VA space allocator with TTBR0
KVM: arm64: Fix benign bug with incorrect use of VA_BITS
KVM: arm64: PMU: Fix period computation for 64bit counters with 32bit overflow
KVM: x86: Advertise that the SMM_CTL MSR is not supported
KVM: x86: remove unnecessary exports
KVM: selftests: Fix spelling mistake "probabalistic" -> "probabilistic"
tools: KVM: selftests: Convert clear/set_bit() to actual atomics
tools: Drop "atomic_" prefix from atomic test_and_set_bit()
tools: Drop conflicting non-atomic test_and_{clear,set}_bit() helpers
KVM: selftests: Use non-atomic clear/set bit helpers in KVM tests
perf tools: Use dedicated non-atomic clear/set bit helpers
tools: Take @bit as an "unsigned long" in {clear,set}_bit() helpers
KVM: arm64: selftests: Enable single-step without a "full" ucall()
KVM: x86: fix APICv/x2AVIC disabled when vm reboot by itself
KVM: Remove stale comment about KVM_REQ_UNHALT
KVM: Add missing arch for KVM_CREATE_DEVICE and KVM_{SET,GET}_DEVICE_ATTR
KVM: Reference to kvm_userspace_memory_region in doc and comments
KVM: Delete all references to removed KVM_SET_MEMORY_ALIAS ioctl
...
|
