| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Implement the uABI of UFFDIO_MOVE ioctl.
UFFDIO_COPY performs ~20% better than UFFDIO_MOVE when the application
needs pages to be allocated [1]. However, with UFFDIO_MOVE, if pages are
available (in userspace) for recycling, as is usually the case in heap
compaction algorithms, then we can avoid the page allocation and memcpy
(done by UFFDIO_COPY). Also, since the pages are recycled in the
userspace, we avoid the need to release (via madvise) the pages back to
the kernel [2].
We see over 40% reduction (on a Google pixel 6 device) in the compacting
thread's completion time by using UFFDIO_MOVE vs. UFFDIO_COPY. This was
measured using a benchmark that emulates a heap compaction implementation
using userfaultfd (to allow concurrent accesses by application threads).
More details of the usecase are explained in [2]. Furthermore,
UFFDIO_MOVE enables moving swapped-out pages without touching them within
the same vma. Today, it can only be done by mremap, however it forces
splitting the vma.
[1] https://lore.kernel.org/all/1425575884-2574-1-git-send-email-aarcange@redhat.com/
[2] https://lore.kernel.org/linux-mm/CA+EESO4uO84SSnBhArH4HvLNhaUQ5nZKNKXqxRCyjniNVjp0Aw@mail.gmail.com/
Update for the ioctl_userfaultfd(2) manpage:
UFFDIO_MOVE
(Since Linux xxx) Move a continuous memory chunk into the
userfault registered range and optionally wake up the blocked
thread. The source and destination addresses and the number of
bytes to move are specified by the src, dst, and len fields of
the uffdio_move structure pointed to by argp:
struct uffdio_move {
__u64 dst; /* Destination of move */
__u64 src; /* Source of move */
__u64 len; /* Number of bytes to move */
__u64 mode; /* Flags controlling behavior of move */
__s64 move; /* Number of bytes moved, or negated error */
};
The following value may be bitwise ORed in mode to change the
behavior of the UFFDIO_MOVE operation:
UFFDIO_MOVE_MODE_DONTWAKE
Do not wake up the thread that waits for page-fault
resolution
UFFDIO_MOVE_MODE_ALLOW_SRC_HOLES
Allow holes in the source virtual range that is being moved.
When not specified, the holes will result in ENOENT error.
When specified, the holes will be accounted as successfully
moved memory. This is mostly useful to move hugepage aligned
virtual regions without knowing if there are transparent
hugepages in the regions or not, but preventing the risk of
having to split the hugepage during the operation.
The move field is used by the kernel to return the number of
bytes that was actually moved, or an error (a negated errno-
style value). If the value returned in move doesn't match the
value that was specified in len, the operation fails with the
error EAGAIN. The move field is output-only; it is not read by
the UFFDIO_MOVE operation.
The operation may fail for various reasons. Usually, remapping of
pages that are not exclusive to the given process fail; once KSM
might deduplicate pages or fork() COW-shares pages during fork()
with child processes, they are no longer exclusive. Further, the
kernel might only perform lightweight checks for detecting whether
the pages are exclusive, and return -EBUSY in case that check fails.
To make the operation more likely to succeed, KSM should be
disabled, fork() should be avoided or MADV_DONTFORK should be
configured for the source VMA before fork().
This ioctl(2) operation returns 0 on success. In this case, the
entire area was moved. On error, -1 is returned and errno is
set to indicate the error. Possible errors include:
EAGAIN The number of bytes moved (i.e., the value returned in
the move field) does not equal the value that was
specified in the len field.
EINVAL Either dst or len was not a multiple of the system page
size, or the range specified by src and len or dst and len
was invalid.
EINVAL An invalid bit was specified in the mode field.
ENOENT
The source virtual memory range has unmapped holes and
UFFDIO_MOVE_MODE_ALLOW_SRC_HOLES is not set.
EEXIST
The destination virtual memory range is fully or partially
mapped.
EBUSY
The pages in the source virtual memory range are either
pinned or not exclusive to the process. The kernel might
only perform lightweight checks for detecting whether the
pages are exclusive. To make the operation more likely to
succeed, KSM should be disabled, fork() should be avoided
or MADV_DONTFORK should be configured for the source virtual
memory area before fork().
ENOMEM Allocating memory needed for the operation failed.
ESRCH
The target process has exited at the time of a UFFDIO_MOVE
operation.
Link: https://lkml.kernel.org/r/20231206103702.3873743-3-surenb@google.com
Signed-off-by: Andrea Arcangeli <aarcange@redhat.com>
Signed-off-by: Suren Baghdasaryan <surenb@google.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Axel Rasmussen <axelrasmussen@google.com>
Cc: Brian Geffon <bgeffon@google.com>
Cc: Christian Brauner <brauner@kernel.org>
Cc: David Hildenbrand <david@redhat.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Jann Horn <jannh@google.com>
Cc: Kalesh Singh <kaleshsingh@google.com>
Cc: Liam R. Howlett <Liam.Howlett@oracle.com>
Cc: Lokesh Gidra <lokeshgidra@google.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Mike Rapoport (IBM) <rppt@kernel.org>
Cc: Nicolas Geoffray <ngeoffray@google.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: ZhangPeng <zhangpeng362@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
commands
There are eight command inputs for 'state' DAMON sysfs file, and those are
verbosely explained in multiple paragraphs. It is not easy to find
explanation of specific command, and getting whole picture of supported
commands. Replace the paragraphs with a list.
Link: https://lkml.kernel.org/r/20231213190338.54146-7-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
'Sysfs Files Hierarchy' section of DAMON usage document shows whole
picture of the interface. Then sections for detailed explanation of the
files follow. Due to the amount of the files, navigating between the
whole picture and the section for specific files sometimes require no
subtle amount of scrolling. Add links from the whole picture to the
dedicated sections for making the navigation easier.
Link: https://lkml.kernel.org/r/20231213190338.54146-6-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
The label for context DAMON sysfs directory section is having name
sysfs_contexts. The name would be better to be used for the contexts
directory. Rename it to represent a single context.
Link: https://lkml.kernel.org/r/20231213190338.54146-5-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
The execution model and data structures section at the end of the design
document is briefly explaining how DAMON works overall. Knowing that
first may help better drawing the overall picture. It may also help
better understanding following detailed sections. Move it to the
beginning of the document.
Link: https://lkml.kernel.org/r/20231213190338.54146-4-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
In preparation for adding support for anonymous multi-size THP, introduce
new sysfs structure that will be used to control the new behaviours. A
new directory is added under transparent_hugepage for each supported THP
size, and contains an `enabled` file, which can be set to "inherit" (to
inherit the global setting), "always", "madvise" or "never". For now, the
kernel still only supports PMD-sized anonymous THP, so only 1 directory is
populated.
The first half of the change converts transhuge_vma_suitable() and
hugepage_vma_check() so that they take a bitfield of orders for which the
user wants to determine support, and the functions filter out all the
orders that can't be supported, given the current sysfs configuration and
the VMA dimensions. The resulting functions are renamed to
thp_vma_suitable_orders() and thp_vma_allowable_orders() respectively.
Convenience functions that take a single, unencoded order and return a
boolean are also defined as thp_vma_suitable_order() and
thp_vma_allowable_order().
The second half of the change implements the new sysfs interface. It has
been done so that each supported THP size has a `struct thpsize`, which
describes the relevant metadata and is itself a kobject. This is pretty
minimal for now, but should make it easy to add new per-thpsize files to
the interface if needed in future (e.g. per-size defrag). Rather than
keep the `enabled` state directly in the struct thpsize, I've elected to
directly encode it into huge_anon_orders_[always|madvise|inherit]
bitfields since this reduces the amount of work required in
thp_vma_allowable_orders() which is called for every page fault.
See Documentation/admin-guide/mm/transhuge.rst, as modified by this
commit, for details of how the new sysfs interface works.
[ryan.roberts@arm.com: fix build warning when CONFIG_SYSFS is disabled]
Link: https://lkml.kernel.org/r/20231211125320.3997543-1-ryan.roberts@arm.com
Link: https://lkml.kernel.org/r/20231207161211.2374093-4-ryan.roberts@arm.com
Signed-off-by: Ryan Roberts <ryan.roberts@arm.com>
Reviewed-by: Barry Song <v-songbaohua@oppo.com>
Tested-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Tested-by: John Hubbard <jhubbard@nvidia.com>
Acked-by: David Hildenbrand <david@redhat.com>
Cc: Alistair Popple <apopple@nvidia.com>
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: David Rientjes <rientjes@google.com>
Cc: "Huang, Ying" <ying.huang@intel.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Itaru Kitayama <itaru.kitayama@gmail.com>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Luis Chamberlain <mcgrof@kernel.org>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Yang Shi <shy828301@gmail.com>
Cc: Yin Fengwei <fengwei.yin@intel.com>
Cc: Yu Zhao <yuzhao@google.com>
Cc: Zi Yan <ziy@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Update DAMON sysfs usage for newly added DAMOS quota goals interface.
Link: https://lkml.kernel.org/r/20231130023652.50284-10-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: Brendan Higgins <brendanhiggins@google.com>
Cc: David Gow <davidgow@google.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Update DAMON ABI document for the newly added DAMON sysfs files and inputs
for DAMOS quota goals.
Link: https://lkml.kernel.org/r/20231130023652.50284-9-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: Brendan Higgins <brendanhiggins@google.com>
Cc: David Gow <davidgow@google.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Document the DAMOS quota auto tuning feature on the design document.
Link: https://lkml.kernel.org/r/20231130023652.50284-8-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: Brendan Higgins <brendanhiggins@google.com>
Cc: David Gow <davidgow@google.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Currently, we only shrink the zswap pool when the user-defined limit is
hit. This means that if we set the limit too high, cold data that are
unlikely to be used again will reside in the pool, wasting precious
memory. It is hard to predict how much zswap space will be needed ahead
of time, as this depends on the workload (specifically, on factors such as
memory access patterns and compressibility of the memory pages).
This patch implements a memcg- and NUMA-aware shrinker for zswap, that is
initiated when there is memory pressure. The shrinker does not have any
parameter that must be tuned by the user, and can be opted in or out on a
per-memcg basis.
Furthermore, to make it more robust for many workloads and prevent
overshrinking (i.e evicting warm pages that might be refaulted into
memory), we build in the following heuristics:
* Estimate the number of warm pages residing in zswap, and attempt to
protect this region of the zswap LRU.
* Scale the number of freeable objects by an estimate of the memory
saving factor. The better zswap compresses the data, the fewer pages
we will evict to swap (as we will otherwise incur IO for relatively
small memory saving).
* During reclaim, if the shrinker encounters a page that is also being
brought into memory, the shrinker will cautiously terminate its
shrinking action, as this is a sign that it is touching the warmer
region of the zswap LRU.
As a proof of concept, we ran the following synthetic benchmark: build the
linux kernel in a memory-limited cgroup, and allocate some cold data in
tmpfs to see if the shrinker could write them out and improved the overall
performance. Depending on the amount of cold data generated, we observe
from 14% to 35% reduction in kernel CPU time used in the kernel builds.
[nphamcs@gmail.com: check shrinker enablement early, use less costly stat flushing]
Link: https://lkml.kernel.org/r/20231206194456.3234203-1-nphamcs@gmail.com
Link: https://lkml.kernel.org/r/20231130194023.4102148-7-nphamcs@gmail.com
Signed-off-by: Nhat Pham <nphamcs@gmail.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Tested-by: Bagas Sanjaya <bagasdotme@gmail.com>
Cc: Chris Li <chrisl@kernel.org>
Cc: Dan Streetman <ddstreet@ieee.org>
Cc: Domenico Cerasuolo <cerasuolodomenico@gmail.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Seth Jennings <sjenning@redhat.com>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Vitaly Wool <vitaly.wool@konsulko.com>
Cc: Yosry Ahmed <yosryahmed@google.com>
Cc: Chengming Zhou <chengming.zhou@linux.dev>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
There were already assertions that we were not passing a tail page to
error_remove_page(), so make the compiler enforce that by converting
everything to pass and use a folio.
Link: https://lkml.kernel.org/r/20231117161447.2461643-7-willy@infradead.org
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Naoya Horiguchi <naoya.horiguchi@nec.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
ZRAM_MEMORY_TRACKING enables two features:
- per-entry ac-time tracking
- debugfs interface
The latter one is the reason why memory-tracking depends on DEBUG_FS,
while the former one is used far beyond debugging these days. Namely
ac-time is used for fine grained writeback of idle entries (pages).
Move ac-time tracking under its own config option so that it can be
enabled (along with writeback) on systems without DEBUG_FS.
[senozhatsky@chromium.org: ifdef fixup, per Dmytro]
Link: https://lkml.kernel.org/r/20231117013543.540280-1-senozhatsky@chromium.org
Link: https://lkml.kernel.org/r/20231115024223.4133148-1-senozhatsky@chromium.org
Signed-off-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Dmytro Maluka <dmaluka@chromium.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
pte_bad() never existed unlike similar helpers at PMU, PUD, and PGD level.
This was added erroneously and hence should be dropped instead.
Link: https://lkml.kernel.org/r/20231114063456.339652-1-anshuman.khandual@arm.com
Signed-off-by: Anshuman Khandual <anshuman.khandual@arm.com>
Reviewed-by: Rick Edgecombe <rick.p.edgecombe@intel.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
The PAGEMAP_SCAN ioctl returns information regarding page table entries.
It is more efficient compared to reading pagemap files. CRIU can start to
utilize this ioctl, but it needs info about soft-dirty bits to track
memory changes.
We are aware of a new method for tracking memory changes implemented in
the PAGEMAP_SCAN ioctl. For CRIU, the primary advantage of this method is
its usability by unprivileged users. However, it is not feasible to
transparently replace the soft-dirty tracker with the new one. The main
problem here is userfault descriptors that have to be preserved between
pre-dump iterations. It means criu continues supporting the soft-dirty
method to avoid breakage for current users. The new method will be
implemented as a separate feature.
[avagin@google.com: update tools/include/uapi/linux/fs.h]
Link: https://lkml.kernel.org/r/20231107164139.576046-1-avagin@google.com
Link: https://lkml.kernel.org/r/20231106220959.296568-1-avagin@google.com
Signed-off-by: Andrei Vagin <avagin@google.com>
Reviewed-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Cc: Michał Mirosław <mirq-linux@rere.qmqm.pl>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Introduce the new interface mtree_dup() in the documentation.
Link: https://lkml.kernel.org/r/20231027033845.90608-7-zhangpeng.00@bytedance.com
Signed-off-by: Peng Zhang <zhangpeng.00@bytedance.com>
Reviewed-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Mateusz Guzik <mjguzik@gmail.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Michael S. Tsirkin <mst@redhat.com>
Cc: Mike Christie <michael.christie@oracle.com>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Suren Baghdasaryan <surenb@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/lee/leds
Pull LED fix from Lee Jones:
- Remove duplicate sysfs entry 'color' from LEDs class
* tag 'leds-fixes-6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/leds:
leds: class: Don't expose color sysfs entry
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl
Pull pin control fixes from Linus Walleij:
- Fix a really interesting potential core bug in the list iterator
requireing the use of READ_ONCE() discovered when testing kernel
compiles with clang.
- Check devm_kcalloc() return value and an array bounds in the STM32
driver.
- Fix an exotic string truncation issue in the s32cc driver, found by
the kernel test robot (impressive!)
- Fix an undocumented struct member in the cy8c95x0 driver.
- Fix a symbol overlap with MIPS in the Lochnagar driver, MIPS defines
a global symbol "RST" which is a bit too generic and collide with
stuff. OK this one should be renamed too, we will fix that as well.
- Fix erroneous branch taking in the Realtek driver.
- Fix the mail address in MAINTAINERS for the s32g2 driver.
* tag 'pinctrl-v6.7-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl:
dt-bindings: pinctrl: s32g2: change a maintainer email address
pinctrl: realtek: Fix logical error when finding descriptor
pinctrl: lochnagar: Don't build on MIPS
pinctrl: avoid reload of p state in list iteration
pinctrl: cy8c95x0: Fix doc warning
pinctrl: s32cc: Avoid possible string truncation
pinctrl: stm32: fix array read out of bound
pinctrl: stm32: Add check for devm_kcalloc
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB / PHY / Thunderbolt fixes from Greg KH:
"Here are a number of reverts, fixes, and new device ids for 6.7-rc3
for the USB, PHY, and Thunderbolt driver subsystems. Include in here
are:
- reverts of some PHY drivers that went into 6.7-rc1 that shouldn't
have been merged yet, the author is reworking them based on review
comments as they were using older apis that shouldn't be used
anymore for newer drivers
- small thunderbolt driver fixes for reported issues
- USB driver fixes for a variety of small issues in dwc3, typec,
xhci, and other smaller drivers.
- new device ids for usb-serial and onboard_usb_hub drivers.
All of these have been in linux-next with no reported issues"
* tag 'usb-6.7-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (33 commits)
USB: serial: option: add Luat Air72*U series products
USB: dwc3: qcom: fix ACPI platform device leak
USB: dwc3: qcom: fix software node leak on probe errors
USB: dwc3: qcom: fix resource leaks on probe deferral
USB: dwc3: qcom: simplify wakeup interrupt setup
USB: dwc3: qcom: fix wakeup after probe deferral
dt-bindings: usb: qcom,dwc3: fix example wakeup interrupt types
usb: misc: onboard-hub: add support for Microchip USB5744
dt-bindings: usb: microchip,usb5744: Add second supply
usb: misc: ljca: Fix enumeration error on Dell Latitude 9420
USB: serial: option: add Fibocom L7xx modules
USB: xhci-plat: fix legacy PHY double init
usb: typec: tipd: Supply also I2C driver data
usb: xhci-mtk: fix in-ep's start-split check failure
usb: dwc3: set the dma max_seg_size
usb: config: fix iteration issue in 'usb_get_bos_descriptor()'
usb: dwc3: add missing of_node_put and platform_device_put
USB: dwc2: write HCINT with INTMASK applied
usb: misc: ljca: Drop _ADR support to get ljca children devices
usb: cdnsp: Fix deadlock issue during using NCM gadget
...
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial into usb-linus
Johan writes:
USB-serial fixes for 6.7-rc3
Here are a couple of modem device entry fixes and some new modem device
ids.
All have been in linux-next with no reported issues.
* tag 'usb-serial-6.7-rc3' of https://git.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial: (329 commits)
USB: serial: option: add Luat Air72*U series products
USB: serial: option: add Fibocom L7xx modules
USB: serial: option: fix FM101R-GL defines
USB: serial: option: don't claim interface 4 for ZTE MF290
Linux 6.7-rc2
prctl: Disable prctl(PR_SET_MDWE) on parisc
parisc/power: Fix power soft-off when running on qemu
parisc: Replace strlcpy() with strscpy()
NFSD: Fix checksum mismatches in the duplicate reply cache
NFSD: Fix "start of NFS reply" pointer passed to nfsd_cache_update()
NFSD: Update nfsd_cache_append() to use xdr_stream
nfsd: fix file memleak on client_opens_release
dm-crypt: start allocating with MAX_ORDER
dm-verity: don't use blocking calls from tasklets
dm-bufio: fix no-sleep mode
dm-delay: avoid duplicate logic
dm-delay: fix bugs introduced by kthread mode
dm-delay: fix a race between delay_presuspend and delay_bio
drm/amdgpu/gmc9: disable AGP aperture
drm/amdgpu/gmc10: disable AGP aperture
...
|
|
I am leaving SUSE so the current email address <clin@suse.com> will be
disabled soon. <chester62515@gmail.com> will be my new address for handling
emails, patches and pull requests from upstream and communities.
Cc: Chester Lin <chester62515@gmail.com>
Cc: NXP S32 Linux Team <s32@nxp.com>
Cc: Ghennadi Procopciuc <Ghennadi.Procopciuc@oss.nxp.com>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>
Cc: Conor Dooley <conor+dt@kernel.org>
Signed-off-by: Chester Lin <clin@suse.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20231116001913.16121-1-clin@suse.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from bpf.
Current release - regressions:
- Revert "net: r8169: Disable multicast filter for RTL8168H and
RTL8107E"
- kselftest: rtnetlink: fix ip route command typo
Current release - new code bugs:
- s390/ism: make sure ism driver implies smc protocol in kconfig
- two build fixes for tools/net
Previous releases - regressions:
- rxrpc: couple of ACK/PING/RTT handling fixes
Previous releases - always broken:
- bpf: verify bpf_loop() callbacks as if they are called unknown
number of times
- improve stability of auto-bonding with Hyper-V
- account BPF-neigh-redirected traffic in interface statistics
Misc:
- net: fill in some more MODULE_DESCRIPTION()s"
* tag 'net-6.7-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (58 commits)
tools: ynl: fix duplicate op name in devlink
tools: ynl: fix header path for nfsd
net: ipa: fix one GSI register field width
tls: fix NULL deref on tls_sw_splice_eof() with empty record
net: axienet: Fix check for partial TX checksum
vsock/test: fix SEQPACKET message bounds test
i40e: Fix adding unsupported cloud filters
ice: restore timestamp configuration after device reset
ice: unify logic for programming PFINT_TSYN_MSK
ice: remove ptp_tx ring parameter flag
amd-xgbe: propagate the correct speed and duplex status
amd-xgbe: handle the corner-case during tx completion
amd-xgbe: handle corner-case during sfp hotplug
net: veth: fix ethtool stats reporting
octeontx2-pf: Fix ntuple rule creation to direct packet to VF with higher Rx queue than its PF
net: usb: qmi_wwan: claim interface 4 for ZTE MF290
Revert "net: r8169: Disable multicast filter for RTL8168H and RTL8107E"
net/smc: avoid data corruption caused by decline
nfc: virtual_ncidev: Add variable to check if ndev is running
dpll: Fix potential msg memleak when genlmsg_put_reply failed
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson
Pull LoongArch fixes from Huacai Chen:
"Fix several build errors, a potential kernel panic, a cpu hotplug
issue and update links in documentations"
* tag 'loongarch-fixes-6.7-1' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson:
Docs/zh_CN/LoongArch: Update links in LoongArch introduction.rst
Docs/LoongArch: Update links in LoongArch introduction.rst
LoongArch: Implement constant timer shutdown interface
LoongArch: Mark {dmw,tlb}_virt_to_page() exports as non-GPL
LoongArch: Silence the boot warning about 'nokaslr'
LoongArch: Add __percpu annotation for __percpu_read()/__percpu_write()
LoongArch: Record pc instead of offset in la_abs relocation
LoongArch: Explicitly set -fdirect-access-external-data for vmlinux
LoongArch: Add dependency between vmlinuz.efi and vmlinux.efi
|
|
The DP/DM wakeup interrupts are edge triggered and which edge to trigger
on depends on use-case and whether a Low speed or Full/High speed device
is connected.
Fixes: 3828026c9ec8 ("dt-bindings: usb: qcom,dwc3: Convert USB DWC3 bindings")
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Andrew Halaney <ahalaney@redhat.com>
Link: https://lore.kernel.org/r/20231120161607.7405-2-johan+linaro@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The USB5744 has two power supplies one for 3V3 and one for 1V2. Add the
second supply to the USB5744 DT binding.
Signed-off-by: Stefan Eichenberger <stefan.eichenberger@toradex.com>
Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Cc: stable <stable@kernel.org>
Link: https://lore.kernel.org/r/20231113145921.30104-2-francesco@dolcini.it
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The commit c7d80059b086 ("leds: class: Store the color index in struct
led_classdev") introduced a new sysfs entry "color" that is commonly
created for the led classdev. Unfortunately, this conflicts with the
"color" sysfs entry of already existing drivers such as Logitech HID
or System76 ACPI drivers. The driver probe fails due to the conflict,
hence it leads to a severe regression with the missing keyboard, for
example.
This patch reverts partially the change in the commit above for
removing the led class color sysfs entries again for addressing the
regressions. The newly introduced led_classdev.color field is kept as
it's already used by other driver.
Fixes: c7d80059b086 ("leds: class: Store the color index in struct led_classdev")
Reported-by: Johannes Penßel <johannes.penssel@gmail.com>
Closes: https://lore.kernel.org/r/b5646db3-acff-45aa-baef-df3f660486fb@gmail.com
Link: https://bugzilla.kernel.org/show_bug.cgi?id=218045
Link: https://bugzilla.kernel.org/show_bug.cgi?id=218155
Link: https://bugzilla.suse.com/show_bug.cgi?id=1217172
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20231121162359.9332-1-tiwai@suse.de
Signed-off-by: Lee Jones <lee@kernel.org>
|
|
There has been more than a few threads which went idle before
the merge window and now people came back to them and started
asking about next steps.
We currently tell people to be patient and not to repost too
often. Our "not too often", however, is still a few orders of
magnitude faster than other subsystems. Or so I feel after
hearing people talk about review rates at LPC.
Clarify in the doc that if the discussion went idle for a week
on netdev, 95% of the time there's no point waiting longer.
Link: https://lore.kernel.org/r/20231120200109.620392-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/xiang/erofs
Pull erofs fixes from Gao Xiang:
- Tidy up erofs_read_inode() for simplicity
- Fix broken fscache mode due to NULL dereference of dif->bdev_handle
- Add the EROFS webpage to MAINTAINERS, documentation, and Kconfig
* tag 'erofs-for-6.7-rc3-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/xiang/erofs:
MAINTAINERS: erofs: add EROFS webpage
erofs: fix NULL dereference of dif->bdev_handle in fscache mode
erofs: simplify erofs_read_inode()
|
|
The example host controller node has two PHYs and therefore needs two
PHY names.
Fixes: 3aa3c66aedef ("dt-bindings: usb: Bring back phy-names")
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20231110134802.32060-1-johan+linaro@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
LoongArch-Vol1 has been updated to v1.10, the links in the documentation
are out of date, let's update it.
Signed-off-by: Yanteng Si <siyanteng@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
LoongArch-Vol1 has been updated to v1.10, the links in the documentation
are out of date, let's update it.
Signed-off-by: Yanteng Si <siyanteng@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Borislav Petkov:
- Ignore invalid x2APIC entries in order to not waste per-CPU data
- Fix a back-to-back signals handling scenario when shadow stack is in
use
- A documentation fix
- Add Kirill as TDX maintainer
* tag 'x86_urgent_for_v6.7_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/acpi: Ignore invalid x2APIC entries
x86/shstk: Delay signal entry SSP write until after user accesses
x86/Documentation: Indent 'note::' directive for protocol version number note
MAINTAINERS: Add Intel TDX entry
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"Seven small fixes, six in drivers and one in sd.
The sd fix is so large because it changes a struct pointer to a struct
but otherwise is fairly simple"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: ufs: qcom-ufs: dt-bindings: Document the SM8650 UFS Controller
scsi: sd: Fix sshdr use in sd_suspend_common()
scsi: scsi_debug: Delete some bogus error checking
scsi: scsi_debug: Fix some bugs in sdebug_error_write()
scsi: ufs: core: Fix racing issue between ufshcd_mcq_abort() and ISR
scsi: ufs: core: Expand MCQ queue slot to DeviceQueueDepth + 1
scsi: qla2xxx: Fix system crash due to bad pointer access
|
|
Add a new `W:` field of the EROFS entry points to the documentation
site at <https://erofs.docs.kernel.org>.
In addition, update the in-tree documentation and Kconfig too.
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Link: https://lore.kernel.org/r/20231117085329.1624223-1-hsiangkao@linux.alibaba.com
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Paolo Abeni:
"Including fixes from BPF and netfilter.
Current release - regressions:
- core: fix undefined behavior in netdev name allocation
- bpf: do not allocate percpu memory at init stage
- netfilter: nf_tables: split async and sync catchall in two
functions
- mptcp: fix possible NULL pointer dereference on close
Current release - new code bugs:
- eth: ice: dpll: fix initial lock status of dpll
Previous releases - regressions:
- bpf: fix precision backtracking instruction iteration
- af_unix: fix use-after-free in unix_stream_read_actor()
- tipc: fix kernel-infoleak due to uninitialized TLV value
- eth: bonding: stop the device in bond_setup_by_slave()
- eth: mlx5:
- fix double free of encap_header
- avoid referencing skb after free-ing in drop path
- eth: hns3: fix VF reset
- eth: mvneta: fix calls to page_pool_get_stats
Previous releases - always broken:
- core: set SOCK_RCU_FREE before inserting socket into hashtable
- bpf: fix control-flow graph checking in privileged mode
- eth: ppp: limit MRU to 64K
- eth: stmmac: avoid rx queue overrun
- eth: icssg-prueth: fix error cleanup on failing initialization
- eth: hns3: fix out-of-bounds access may occur when coalesce info is
read via debugfs
- eth: cortina: handle large frames
Misc:
- selftests: gso: support CONFIG_MAX_SKB_FRAGS up to 45"
* tag 'net-6.7-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (78 commits)
macvlan: Don't propagate promisc change to lower dev in passthru
net: sched: do not offload flows with a helper in act_ct
net/mlx5e: Check return value of snprintf writing to fw_version buffer for representors
net/mlx5e: Check return value of snprintf writing to fw_version buffer
net/mlx5e: Reduce the size of icosq_str
net/mlx5: Increase size of irq name buffer
net/mlx5e: Update doorbell for port timestamping CQ before the software counter
net/mlx5e: Track xmit submission to PTP WQ after populating metadata map
net/mlx5e: Avoid referencing skb after free-ing in drop path of mlx5e_sq_xmit_wqe
net/mlx5e: Don't modify the peer sent-to-vport rules for IPSec offload
net/mlx5e: Fix pedit endianness
net/mlx5e: fix double free of encap_header in update funcs
net/mlx5e: fix double free of encap_header
net/mlx5: Decouple PHC .adjtime and .adjphase implementations
net/mlx5: DR, Allow old devices to use multi destination FTE
net/mlx5: Free used cpus mask when an IRQ is released
Revert "net/mlx5: DR, Supporting inline WQE when possible"
bpf: Do not allocate percpu memory at init stage
net: Fix undefined behavior in netdev name allocation
dt-bindings: net: ethernet-controller: Fix formatting error
...
|
|
When moving the *-internal-delay-ps properties to only apply for RGMII
interface modes there where a typo in the text formatting.
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Pull in queued fixes for 6.7
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull probes fixes from Masami Hiramatsu:
- Documentation update: Add a note about argument and return value
fetching is the best effort because it depends on the type.
- objpool: Fix to make internal global variables static in
test_objpool.c.
- kprobes: Unify kprobes_exceptions_nofify() prototypes. There are the
same prototypes in asm/kprobes.h for some architectures, but some of
them are missing the prototype and it causes a warning. So move the
prototype into linux/kprobes.h.
- tracing: Fix to check the tracepoint event and return event at
parsing stage. The tracepoint event doesn't support %return but if
$retval exists, it will be converted to %return silently. This finds
that case and rejects it.
- tracing: Fix the order of the descriptions about the parameters of
__kprobe_event_gen_cmd_start() to be consistent with the argument
list of the function.
* tag 'probes-fixes-v6.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
tracing/kprobes: Fix the order of argument descriptions
tracing: fprobe-event: Fix to check tracepoint event and return
kprobes: unify kprobes_exceptions_nofify() prototypes
lib: test_objpool: make global variables static
Documentation: tracing: Add a note about argument and retval access
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 fixes from Catalin Marinas:
"Mostly PMU fixes and a reworking of the pseudo-NMI disabling on broken
MediaTek firmware:
- Move the MediaTek GIC quirk handling from irqchip to core. Before
the merging window commit 44bd78dd2b88 ("irqchip/gic-v3: Disable
pseudo NMIs on MediaTek devices w/ firmware issues") temporarily
addressed this issue. Fixed now at a deeper level in the arch code
- Reject events meant for other PMUs in the CoreSight PMU driver,
otherwise some of the core PMU events would disappear
- Fix the Armv8 PMUv3 driver driver to not truncate 64-bit registers,
causing some events to be invisible
- Remove duplicate declaration of __arm64_sys##name following the
patch to avoid prototype warning for syscalls
- Typos in the elf_hwcap documentation"
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
arm64/syscall: Remove duplicate declaration
Revert "arm64: smp: avoid NMI IPIs with broken MediaTek FW"
arm64: Move MediaTek GIC quirk handling from irqchip to core
arm64/arm: arm_pmuv3: perf: Don't truncate 64-bit registers
perf: arm_cspmu: Reject events meant for other PMUs
Documentation/arm64: Fix typos in elf_hwcaps
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull more RISC-V updates from Palmer Dabbelt:
- Support for handling misaligned accesses in S-mode
- Probing for misaligned access support is now properly cached and
handled in parallel
- PTDUMP now reflects the SW reserved bits, as well as the PBMT and
NAPOT extensions
- Performance improvements for TLB flushing
- Support for many new relocations in the module loader
- Various bug fixes and cleanups
* tag 'riscv-for-linus-6.7-mw2' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: (51 commits)
riscv: Optimize bitops with Zbb extension
riscv: Rearrange hwcap.h and cpufeature.h
drivers: perf: Do not broadcast to other cpus when starting a counter
drivers: perf: Check find_first_bit() return value
of: property: Add fw_devlink support for msi-parent
RISC-V: Don't fail in riscv_of_parent_hartid() for disabled HARTs
riscv: Fix set_memory_XX() and set_direct_map_XX() by splitting huge linear mappings
riscv: Don't use PGD entries for the linear mapping
RISC-V: Probe misaligned access speed in parallel
RISC-V: Remove __init on unaligned_emulation_finish()
RISC-V: Show accurate per-hart isa in /proc/cpuinfo
RISC-V: Don't rely on positional structure initialization
riscv: Add tests for riscv module loading
riscv: Add remaining module relocations
riscv: Avoid unaligned access when relocating modules
riscv: split cache ops out of dma-noncoherent.c
riscv: Improve flush_tlb_kernel_range()
riscv: Make __flush_tlb_range() loop over pte instead of flushing the whole tlb
riscv: Improve flush_tlb_range() for hugetlb pages
riscv: Improve tlb_flush()
...
|
|
Add a note about the argument and return value accecss will be best
effort. Depending on the type, it will be passed via stack or a
pair of the registers, but $argN and $retval only support the
single register access.
Link: https://lore.kernel.org/all/169556269377.146934.14829235476649685954.stgit@devnote2/
Suggested-by: Alexei Starovoitov <alexei.starovoitov@gmail.com>
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from netfilter and bpf.
Current release - regressions:
- sched: fix SKB_NOT_DROPPED_YET splat under debug config
Current release - new code bugs:
- tcp:
- fix usec timestamps with TCP fastopen
- fix possible out-of-bounds reads in tcp_hash_fail()
- fix SYN option room calculation for TCP-AO
- tcp_sigpool: fix some off by one bugs
- bpf: fix compilation error without CGROUPS
- ptp:
- ptp_read() should not release queue
- fix tsevqs corruption
Previous releases - regressions:
- llc: verify mac len before reading mac header
Previous releases - always broken:
- bpf:
- fix check_stack_write_fixed_off() to correctly spill imm
- fix precision tracking for BPF_ALU | BPF_TO_BE | BPF_END
- check map->usercnt after timer->timer is assigned
- dsa: lan9303: consequently nested-lock physical MDIO
- dccp/tcp: call security_inet_conn_request() after setting IP addr
- tg3: fix the TX ring stall due to incorrect full ring handling
- phylink: initialize carrier state at creation
- ice: fix direction of VF rules in switchdev mode
Misc:
- fill in a bunch of missing MODULE_DESCRIPTION()s, more to come"
* tag 'net-6.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (84 commits)
net: ti: icss-iep: fix setting counter value
ptp: fix corrupted list in ptp_open
ptp: ptp_read should not release queue
net_sched: sch_fq: better validate TCA_FQ_WEIGHTS and TCA_FQ_PRIOMAP
net: kcm: fill in MODULE_DESCRIPTION()
net/sched: act_ct: Always fill offloading tuple iifidx
netfilter: nat: fix ipv6 nat redirect with mapped and scoped addresses
netfilter: xt_recent: fix (increase) ipv6 literal buffer length
ipvs: add missing module descriptions
netfilter: nf_tables: remove catchall element in GC sync path
netfilter: add missing module descriptions
drivers/net/ppp: use standard array-copy-function
net: enetc: shorten enetc_setup_xdp_prog() error message to fit NETLINK_MAX_FMTMSG_LEN
virtio/vsock: Fix uninit-value in virtio_transport_recv_pkt()
r8169: respect userspace disabling IFF_MULTICAST
selftests/bpf: get trusted cgrp from bpf_iter__cgroup directly
bpf: Let verifier consider {task,cgroup} is trusted in bpf_iter_reg
net: phylink: initialize carrier state at creation
test/vsock: add dobule bind connect test
test/vsock: refactor vsock_accept
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
Pull input updates from Dmitry Torokhov:
- a number of input drivers has been converted to use facilities
provided by the device core to instantiate driver-specific attributes
instead of using devm_device_add_group() and similar APIs
- platform input devices have been converted to use remove() callback
returning void
- a fix for use-after-free when tearing down a Synaptics RMI device
- a few flexible arrays in input structures have been annotated with
__counted_by to help hardening efforts
- handling of vddio supply in cyttsp5 driver
- other miscellaneous fixups
* tag 'input-for-v6.7-rc0' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (86 commits)
Input: walkera0701 - use module_parport_driver macro to simplify the code
Input: synaptics-rmi4 - fix use after free in rmi_unregister_function()
dt-bindings: input: fsl,scu-key: Document wakeup-source
Input: cyttsp5 - add handling for vddio regulator
dt-bindings: input: cyttsp5: document vddio-supply
Input: tegra-kbc - use device_get_match_data()
Input: Annotate struct ff_device with __counted_by
Input: axp20x-pek - avoid needless newline removal
Input: mt - annotate struct input_mt with __counted_by
Input: leds - annotate struct input_leds with __counted_by
Input: evdev - annotate struct evdev_client with __counted_by
Input: synaptics-rmi4 - replace deprecated strncpy
Input: wm97xx-core - convert to platform remove callback returning void
Input: wm831x-ts - convert to platform remove callback returning void
Input: ti_am335x_tsc - convert to platform remove callback returning void
Input: sun4i-ts - convert to platform remove callback returning void
Input: stmpe-ts - convert to platform remove callback returning void
Input: pcap_ts - convert to platform remove callback returning void
Input: mc13783_ts - convert to platform remove callback returning void
Input: mainstone-wm97xx - convert to platform remove callback returning void
...
|
|
git://www.linux-watchdog.org/linux-watchdog
Pull watchdog updates from Wim Van Sebroeck:
- add support for Amlogic C3 and S4 SoCs
- add IT8613 ID
- add MSM8226 and MSM8974 compatibles
- other small fixes and improvements
* tag 'linux-watchdog-6.7-rc1' of git://www.linux-watchdog.org/linux-watchdog: (24 commits)
dt-bindings: watchdog: Add support for Amlogic C3 and S4 SoCs
watchdog: mlx-wdt: Parameter desctiption warning fix
watchdog: aspeed: Add support for aspeed,reset-mask DT property
dt-bindings: watchdog: aspeed-wdt: Add aspeed,reset-mask property
watchdog: apple: Deactivate on suspend
dt-bindings: watchdog: qcom-wdt: Add MSM8226 and MSM8974 compatibles
dt-bindings: watchdog: fsl-imx7ulp-wdt: Add 'fsl,ext-reset-output'
wdog: imx7ulp: Enable wdog int_en bit for watchdog any reset
drivers: watchdog: marvell_gti: Program the max_hw_heartbeat_ms
drivers: watchdog: marvell_gti: fix zero pretimeout handling
watchdog: marvell_gti: Replace of_platform.h with explicit includes
watchdog: imx_sc_wdt: continue if the wdog already enabled
watchdog: st_lpc: Use device_get_match_data()
watchdog: wdat_wdt: Add timeout value as a param in ping method
watchdog: gpio_wdt: Make use of device properties
sbsa_gwdt: Calculate timeout with 64-bit math
watchdog: ixp4xx: Make sure restart always works
watchdog: it87_wdt: add IT8613 ID
watchdog: marvell_gti_wdt: Fix error code in probe()
Watchdog: marvell_gti_wdt: Remove redundant dev_err_probe() for platform_get_irq()
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm
Pull pwm updates from Thierry Reding:
"This contains a few fixes and a bunch of cleanups, a lot of which is
in preparation for Uwe's character device support that may be ready in
time for the next merge window"
* tag 'pwm/for-6.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm: (37 commits)
pwm: samsung: Document new member .channel in struct samsung_pwm_chip
pwm: bcm2835: Add support for suspend/resume
pwm: brcmstb: Checked clk_prepare_enable() return value
pwm: brcmstb: Utilize appropriate clock APIs in suspend/resume
pwm: pxa: Explicitly include correct DT includes
pwm: cros-ec: Simplify using devm_pwmchip_add() and dev_err_probe()
pwm: samsung: Consistently use the same name for driver data
pwm: vt8500: Simplify using devm functions
pwm: sprd: Simplify using devm_pwmchip_add() and dev_err_probe()
pwm: sprd: Provide a helper to cast a chip to driver data
pwm: spear: Simplify using devm functions
pwm: mtk-disp: Simplify using devm_pwmchip_add()
pwm: imx-tpm: Simplify using devm functions
pwm: brcmstb: Simplify using devm functions
pwm: bcm2835: Simplify using devm functions
pwm: bcm-iproc: Simplify using devm functions
pwm: Adapt sysfs API documentation to reality
pwm: dwc: add PWM bit unset in get_state call
pwm: dwc: make timer clock configurable
pwm: dwc: split pci out of core driver
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu
Pull iommu updates from Joerg Roedel:
"Core changes:
- Make default-domains mandatory for all IOMMU drivers
- Remove group refcounting
- Add generic_single_device_group() helper and consolidate drivers
- Cleanup map/unmap ops
- Scaling improvements for the IOVA rcache depot
- Convert dart & iommufd to the new domain_alloc_paging()
ARM-SMMU:
- Device-tree binding update:
- Add qcom,sm7150-smmu-v2 for Adreno on SM7150 SoC
- SMMUv2:
- Support for Qualcomm SDM670 (MDSS) and SM7150 SoCs
- SMMUv3:
- Large refactoring of the context descriptor code to move the CD
table into the master, paving the way for '->set_dev_pasid()'
support on non-SVA domains
- Minor cleanups to the SVA code
Intel VT-d:
- Enable debugfs to dump domain attached to a pasid
- Remove an unnecessary inline function
AMD IOMMU:
- Initial patches for SVA support (not complete yet)
S390 IOMMU:
- DMA-API conversion and optimized IOTLB flushing
And some smaller fixes and improvements"
* tag 'iommu-updates-v6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: (102 commits)
iommu/dart: Remove the force_bypass variable
iommu/dart: Call apple_dart_finalize_domain() as part of alloc_paging()
iommu/dart: Convert to domain_alloc_paging()
iommu/dart: Move the blocked domain support to a global static
iommu/dart: Use static global identity domains
iommufd: Convert to alloc_domain_paging()
iommu/vt-d: Use ops->blocked_domain
iommu/vt-d: Update the definition of the blocking domain
iommu: Move IOMMU_DOMAIN_BLOCKED global statics to ops->blocked_domain
Revert "iommu/vt-d: Remove unused function"
iommu/amd: Remove DMA_FQ type from domain allocation path
iommu: change iommu_map_sgtable to return signed values
iommu/virtio: Add __counted_by for struct viommu_request and use struct_size()
iommu/vt-d: debugfs: Support dumping a specified page table
iommu/vt-d: debugfs: Create/remove debugfs file per {device, pasid}
iommu/vt-d: debugfs: Dump entry pointing to huge page
iommu/vt-d: Remove unused function
iommu/arm-smmu-v3-sva: Remove bond refcount
iommu/arm-smmu-v3-sva: Remove unused iommu_sva handle
iommu/arm-smmu-v3: Rename cdcfg to cd_table
...
|
|
Document the UFS Controller on the SM8650 Platform.
Reviewed-by: Alim Akhtar <alim.akhtar@samsung.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20231030-topic-sm8650-upstream-bindings-ufs-v3-1-a96364463fd5@linaro.org
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf
Daniel Borkmann says:
====================
pull-request: bpf 2023-11-08
We've added 16 non-merge commits during the last 6 day(s) which contain
a total of 30 files changed, 341 insertions(+), 130 deletions(-).
The main changes are:
1) Fix a BPF verifier issue in precision tracking for BPF_ALU | BPF_TO_BE |
BPF_END where the source register was incorrectly marked as precise,
from Shung-Hsi Yu.
2) Fix a concurrency issue in bpf_timer where the former could still have
been alive after an application releases or unpins the map, from Hou Tao.
3) Fix a BPF verifier issue where immediates are incorrectly cast to u32
before being spilled and therefore losing sign information, from Hao Sun.
4) Fix a misplaced BPF_TRACE_ITER in check_css_task_iter_allowlist which
incorrectly compared bpf_prog_type with bpf_attach_type, from Chuyi Zhou.
5) Add __bpf_hook_{start,end} as well as __bpf_kfunc_{start,end}_defs macros,
migrate all BPF-related __diag callsites over to it, and add a new
__diag_ignore_all for -Wmissing-declarations to the macros to address
recent build warnings, from Dave Marchevsky.
6) Fix broken BPF selftest build of xdp_hw_metadata test on architectures
where char is not signed, from Björn Töpel.
7) Fix test_maps selftest to properly use LIBBPF_OPTS() macro to initialize
the bpf_map_create_opts, from Andrii Nakryiko.
8) Fix bpffs selftest to avoid unmounting /sys/kernel/debug as it may have
been mounted and used by other applications already, from Manu Bretelle.
9) Fix a build issue without CONFIG_CGROUPS wrt css_task open-coded
iterators, from Matthieu Baerts.
* tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf:
selftests/bpf: get trusted cgrp from bpf_iter__cgroup directly
bpf: Let verifier consider {task,cgroup} is trusted in bpf_iter_reg
selftests/bpf: Fix broken build where char is unsigned
selftests/bpf: precision tracking test for BPF_NEG and BPF_END
bpf: Fix precision tracking for BPF_ALU | BPF_TO_BE | BPF_END
selftests/bpf: Add test for using css_task iter in sleepable progs
selftests/bpf: Add tests for css_task iter combining with cgroup iter
bpf: Relax allowlist for css_task iter
selftests/bpf: fix test_maps' use of bpf_map_create_opts
bpf: Check map->usercnt after timer->timer is assigned
bpf: Add __bpf_hook_{start,end} macros
bpf: Add __bpf_kfunc_{start,end}_defs macros
selftests/bpf: fix test_bpffs
selftests/bpf: Add test for immediate spilled to stack
bpf: Fix check_stack_write_fixed_off() to correctly spill imm
bpf: fix compilation error without CGROUPS
====================
Link: https://lore.kernel.org/r/20231108132448.1970-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Pull NFS client updates from Trond Myklebust:
"Bugfixes:
- SUNRPC:
- re-probe the target RPC port after an ECONNRESET error
- handle allocation errors from rpcb_call_async()
- fix a use-after-free condition in rpc_pipefs
- fix up various checks for timeouts
- NFSv4.1:
- Handle NFS4ERR_DELAY errors during session trunking
- fix SP4_MACH_CRED protection for pnfs IO
- NFSv4:
- Ensure that we test all delegations when the server notifies
us that it may have revoked some of them
Features:
- Allow knfsd processes to break out of NFS4ERR_DELAY loops when
re-exporting NFSv4.x by setting appropriate values for the
'delay_retrans' module parameter
- nfs: Convert nfs_symlink() to use a folio"
* tag 'nfs-for-6.7-1' of git://git.linux-nfs.org/projects/trondmy/linux-nfs:
nfs: Convert nfs_symlink() to use a folio
SUNRPC: Fix RPC client cleaned up the freed pipefs dentries
NFSv4.1: fix SP4_MACH_CRED protection for pnfs IO
SUNRPC: Add an IS_ERR() check back to where it was
NFSv4.1: fix handling NFS4ERR_DELAY when testing for session trunking
nfs41: drop dependency between flexfiles layout driver and NFSv3 modules
NFSv4: fairly test all delegations on a SEQ4_ revocation
SUNRPC: SOFTCONN tasks should time out when on the sending list
SUNRPC: Force close the socket when a hard error is reported
SUNRPC: Don't skip timeout checks in call_connect_status()
SUNRPC: ECONNRESET might require a rebind
NFSv4/pnfs: Allow layoutget to return EAGAIN for softerr mounts
NFSv4: Add a parameter to limit the number of retries after NFS4ERR_DELAY
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull RISC-V updates from Palmer Dabbelt:
- Support for cbo.zero in userspace
- Support for CBOs on ACPI-based systems
- A handful of improvements for the T-Head cache flushing ops
- Support for software shadow call stacks
- Various cleanups and fixes
* tag 'riscv-for-linus-6.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: (31 commits)
RISC-V: hwprobe: Fix vDSO SIGSEGV
riscv: configs: defconfig: Enable configs required for RZ/Five SoC
riscv: errata: prefix T-Head mnemonics with th.
riscv: put interrupt entries into .irqentry.text
riscv: mm: Update the comment of CONFIG_PAGE_OFFSET
riscv: Using TOOLCHAIN_HAS_ZIHINTPAUSE marco replace zihintpause
riscv/mm: Fix the comment for swap pte format
RISC-V: clarify the QEMU workaround in ISA parser
riscv: correct pt_level name via pgtable_l5/4_enabled
RISC-V: Provide pgtable_l5_enabled on rv32
clocksource: timer-riscv: Increase rating of clock_event_device for Sstc
clocksource: timer-riscv: Don't enable/disable timer interrupt
lkdtm: Fix CFI_BACKWARD on RISC-V
riscv: Use separate IRQ shadow call stacks
riscv: Implement Shadow Call Stack
riscv: Move global pointer loading to a macro
riscv: Deduplicate IRQ stack switching
riscv: VMAP_STACK overflow detection thread-safe
RISC-V: cacheflush: Initialize CBO variables on ACPI systems
RISC-V: ACPI: RHCT: Add function to get CBO block sizes
...
|
|
Pull more drm updates from Dave Airlie:
"Geert pointed out I missed the renesas reworks in my main pull, so
this pull contains the renesas next work for atomic conversion and DT
support.
It also contains a bunch of amdgpu and some small ssd13xx fixes.
renesas:
- atomic conversion
- DT support
ssd13xx:
- dt binding fix for ssd132x
- Initialize ssd130x crtc_state to NULL.
amdgpu:
- Fix RAS support check
- RAS fixes
- MES fixes
- SMU13 fixes
- Contiguous memory allocation fix
- BACO fixes
- GPU reset fixes
- Min power limit fixes
- GFX11 fixes
- USB4/TB hotplug fixes
- ARM regression fix
- GFX9.4.3 fixes
- KASAN/KCSAN stack size check fixes
- SR-IOV fixes
- SMU14 fixes
- PSP13 fixes
- Display blend fixes
- Flexible array size fixes
amdkfd:
- GPUVM fix
radeon:
- Flexible array size fixes"
* tag 'drm-next-2023-11-07' of git://anongit.freedesktop.org/drm/drm: (83 commits)
drm/amd/display: Enable fast update on blendTF change
drm/amd/display: Fix blend LUT programming
drm/amd/display: Program plane color setting correctly
drm/amdgpu: Query and report boot status
drm/amdgpu: Add psp v13 function to query boot status
drm/amd/swsmu: remove fw version check in sw_init.
drm/amd/swsmu: update smu v14_0_0 driver if and metrics table
drm/amdgpu: Add C2PMSG_109/126 reg field shift/masks
drm/amdgpu: Optimize the asic type fix code
drm/amdgpu: fix GRBM read timeout when do mes_self_test
drm/amdgpu: check recovery status of xgmi hive in ras_reset_error_count
drm/amd/pm: only check sriov vf flag once when creating hwmon sysfs
drm/amdgpu: Attach eviction fence on alloc
drm/amdkfd: Improve amdgpu_vm_handle_moved
drm/amd/display: Increase frame warning limit with KASAN or KCSAN in dml2
drm/amd/display: Avoid NULL dereference of timing generator
drm/amdkfd: Update cache info for GFX 9.4.3
drm/amdkfd: Populate cache info for GFX 9.4.3
drm/amdgpu: don't put MQDs in VRAM on ARM | ARM64
drm/amdgpu/smu13: drop compute workload workaround
...
|
