| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Add Loongson SoC boards binding with DT schema format using json-schema.
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Binbin Zhou <zhoubinbin@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
Add the available CPUs in LoongArch binding with DT schema format using
json-schema.
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Binbin Zhou <zhoubinbin@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
Enable initial Rust support for LoongArch.
Tested-by: Miguel Ojeda <ojeda@kernel.org>
Signed-off-by: WANG Rui <wangrui@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
* pm-sleep:
PM: sleep: Restore asynchronous device resume optimization
* pm-cpufreq:
Documentation: admin-guide: PM: Fix two typos
cpufreq: intel_pstate: Update hybrid scaling factor for Meteor Lake
* pm-qos:
PM: QoS: Use kcalloc() instead of kzalloc()
|
|
Document the Analog Devices MAX31335 device tree bindings.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Antoniu Miclaus <antoniu.miclaus@analog.com>
Link: https://lore.kernel.org/r/20231120120114.48657-1-antoniu.miclaus@analog.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
|
|
The RV8803 can be wired directly to a PMIC that can wake up an SoC without
the CPU getting interrupts.
Link: https://lore.kernel.org/r/20240108004357.602918-1-alexandre.belloni@bootlin.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
|
|
- Drop unused struct pci_driver.node member (Mathias Krause)
- Fix documentation typos (Attreyee Mukherjee)
- Use a unique test pattern for each BAR in the pci_endpoint_test to make
it easier to debug address translation issues (Niklas Cassel)
- Fix kernel-doc issues (Bjorn Helgaas)
* pci/misc:
PCI: Fix kernel-doc issues
misc: pci_endpoint_test: Use a unique test pattern for each BAR
docs: PCI: Fix typos
PCI: Remove unused 'node' member from struct pci_driver
|
|
- Increase qcom iommu-map maxItems to accommodate SDX55 (five entries) and
SDM845 (sixteen entries) (Krzysztof Kozlowski)
- Describe qcom,pcie-sc8180x clocks and resets accurately (Krzysztof
Kozlowski)
- Describe qcom,pcie-sm8150 clocks and resets accurately (Krzysztof
Kozlowski)
- Correct the qcom "reset-name" property, previously incorrectly called
"reset-names" (Krzysztof Kozlowski)
- Document rockchip optional PCIe reference clock input (Heiko Stuebner)
- Document qcom,pcie-sm8650, based on qcom,pcie-sm8550 (Neil Armstrong)
* pci/dt-bindings:
dt-bindings: PCI: qcom: Document the SM8650 PCIe Controller
dt-bindings: PCI: dwc: rockchip: Document optional PCIe reference clock input
dt-bindings: PCI: qcom: Correct reset-names property
dt-bindings: PCI: qcom: Correct clocks for SM8150
dt-bindings: PCI: qcom: Correct clocks for SC8180x
dt-bindings: PCI: qcom: Adjust iommu-map for different SoC
|
|
- Replace of_device.h with explicit of.h include to untangle header usage
(Rob Herring)
- Add DT and driver support for optional miniPCIe 1.5v and 3.3v regulators
on KingFisher (Wolfram Sang)
* pci/controller/rcar:
PCI: rcar-host: Add support for optional regulators
dt-bindings: PCI: rcar-pci-host: Add optional regulators
PCI: rcar-gen4: Replace of_device.h with explicit of.h include
|
|
- Add j721e DT and driver support for 'num-lanes' for devices that support
x1, x2, or x4 Links (Matt Ranostay)
- Add j721e DT compatible strings and driver support for j784s4 (Matt Ranostay)
- Make TI J721E Kconfig depend on ARCH_K3 since the hardware is specific to
those TI SoC parts (Peter Robinson)
* pci/controller/cadence:
PCI: j721e: Make TI J721E depend on ARCH_K3
PCI: j721e: Add TI J784S4 PCIe configuration
PCI: j721e: Add PCIe 4x lane selection support
PCI: j721e: Add per platform maximum lane settings
dt-bindings: PCI: ti,j721e-pci-*: Add j784s4-pci-* compatible strings
dt-bindings: PCI: ti,j721e-pci-*: Add checks for num-lanes
|
|
- Add DT property "brcm,clkreq-mode" and driver support for different
CLKREQ# modes (Jim Quinlan)
* pci/controller/broadcom:
PCI: brcmstb: Configure HW CLKREQ# mode appropriate for downstream device
dt-bindings: PCI: brcmstb: Add property "brcm,clkreq-mode"
|
|
Node address doesn't match reg property which is not correct.
Fixes: ba96b2e7974b ("dt-bindings: gpio: gpio-xilinx: Convert Xilinx axi gpio binding to YAML")
Signed-off-by: Michal Simek <michal.simek@amd.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
The hotjoin syfs entry allows to enable or disable Hot-Join on the Current
Controller of the I3C Bus.
Link: https://lore.kernel.org/r/20240114225232.140860-1-alexandre.belloni@bootlin.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
|
|
Update ksmbd feature status in documentation file.
- add support for v2 lease feature and SMB3 CCM/GCM256 encryption.
- add planned compression, quic, gmac signing features.
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
Communication Controller
Document the Inter-Processor Communication Controller on the X1E80100 Platform.
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
|
|
Add documentation for AMD-Xilinx Versal platform Inter Processor Interrupt
controller. Versal IPI controller contains buffer-less IPI which do not
have buffers for message passing. For such IPI channels message buffers
are not expected and only notification to/from remote agent is expected.
Signed-off-by: Tanmay Shah <tanmay.shah@amd.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
|
|
"xlnx,ipi-id" is handled as required property but is
missing from binding doc required list of mailbox child node.
Add that to required list. This does not break backward
compatibility but bug in bindings document.
Fixes: 4a855a957936 ("dt-bindings: mailbox: zynqmp_ipi: convert to yaml")
Signed-off-by: Tanmay Shah <tanmay.shah@amd.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
|
|
Rework the compatibles and group devices which have similar interface
(same from Linux driver point of view) as compatible. This allows
smaller of_device_id table in the Linux driver and smaller
allOf:if:then: constraints.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
|
|
qcom,ipq8074-apcs-apps-global
qcom,ipq8074-apcs-apps-global compatible is listed in two places: with
and without fallback. Drop the second case to match DTS.
Fixes: 34d8775a0edc ("dt-bindings: mailbox: qcom,apcs-kpss-global: use fallbacks for few variants")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
|
|
Pull RCU updates from Neeraj Upadhyay:
- Documentation and comment updates
- RCU torture, locktorture updates that include cleanups; nolibc init
build support for mips, ppc and rv64; testing of mid stall duration
scenario and fixing fqs task creation conditions
- Misc fixes, most notably restricting usage of RCU CPU stall
notifiers, to confine their usage primarily to debug kernels
- RCU tasks minor fixes
- lockdep annotation fix for NMI-safe accesses, callback
advancing/acceleration cleanup and documentation improvements
* tag 'rcu.release.v6.8' of https://github.com/neeraju/linux:
rcu: Force quiescent states only for ongoing grace period
doc: Clarify historical disclaimers in memory-barriers.txt
doc: Mention address and data dependencies in rcu_dereference.rst
doc: Clarify RCU Tasks reader/updater checklist
rculist.h: docs: Fix wrong function summary
Documentation: RCU: Remove repeated word in comments
srcu: Use try-lock lockdep annotation for NMI-safe access.
srcu: Explain why callbacks invocations can't run concurrently
srcu: No need to advance/accelerate if no callback enqueued
srcu: Remove superfluous callbacks advancing from srcu_gp_start()
rcu: Remove unused macros from rcupdate.h
rcu: Restrict access to RCU CPU stall notifiers
rcu-tasks: Mark RCU Tasks accesses to current->rcu_tasks_idle_cpu
rcutorture: Add fqs_holdoff check before fqs_task is created
rcutorture: Add mid-sized stall to TREE07
rcutorture: add nolibc init support for mips, ppc and rv64
locktorture: Increase Hamming distance between call_rcu_chain and rcu_call_chains
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux
Pull devicetree updates from Rob Herring:
- Convert FPGA bridge, all TPMs (finally), and Rockchip HDMI bindings
to schemas
- Improvements in Samsung GPU schemas
- A few more cases of dropping unneeded quotes in schemas
- Merge QCom idle-states txt binding into common idle-states schema
- Add X1E80100, SM8650, SM8650, and SDX75 SoCs to QCom Power Domain
Controller
- Add NXP i.mx8dl to SCU PD
- Add synaptics r63353 panel controller
- Clarify the wording around the use of 'wakeup-source' property
- Add a DTS coding style doc
- Add smi vendor prefix
- Fix DT_SCHEMA_FILES incorrect matching of paths outside the kernel
tree
- Disable sysfb (e.g. EFI FB) when simple-framebuffer node is present
- Fix double free in of_parse_phandle_with_args_map()
- A couple of kerneldoc fixes
* tag 'devicetree-for-6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (37 commits)
of: unittest: Fix of_count_phandle_with_args() expected value message
dt-bindings: fpga: altera: Convert bridge bindings to yaml
dt-bindings: fpga: Convert bridge binding to yaml
dt-bindings: vendor-prefixes: Add smi
dt-bindings: power: Clarify wording for wakeup-source property
of: Fix double free in of_parse_phandle_with_args_map
dt-bindings: ignore paths outside kernel for DT_SCHEMA_FILES
drivers: of: Fixed kernel doc warning
dt-bindings: tpm: Document Microsoft fTPM bindings
dt-bindings: tpm: Convert IBM vTPM bindings to DT schema
dt-bindings: tpm: Convert Google Cr50 bindings to DT schema
dt-bindings: tpm: Consolidate TCG TIS bindings
dt-bindings: display: rockchip,inno-hdmi: Document RK3128 compatible
dt-bindings: arm: Add remote etm dt-binding
dt-bindings: mmc: sdhci-pxa: Fix 'regs' typo
media: dt-bindings: samsung,s5p-mfc: Fix iommu properties schemas
dt-bindings: display: panel: Add synaptics r63353 panel controller
dt-bindings: arm: merge qcom,idle-state with idle-state
dt-bindings: drm: rockchip: convert inno_hdmi-rockchip.txt to yaml
dt-bindings: cache: qcom,llcc: correct QDU1000 reg entries
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm
Pull pwm updates from Thierry Reding:
"This contains a bunch of cleanups and simplifications across the
board, as well as a number of small fixes.
Perhaps the most notable change here is the addition of an API that
allows PWMs to be used in atomic contexts, which is useful when time-
critical operations are involved, such as using a PWM to generate IR
signals.
Finally, I have decided to step down as PWM subsystem maintainer. Due
to other responsibilities I have lately not been able to find the time
that the subsystem deserves and Uwe, who has been helping out a lot
for the past few years and has many things planned for the future, has
kindly volunteered to take over. I have no doubt that he will be a
suitable replacement"
* tag 'pwm/for-6.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm: (44 commits)
MAINTAINERS: pwm: Thierry steps down, Uwe takes over
pwm: linux/pwm.h: fix Excess kernel-doc description warning
pwm: Add pwm_apply_state() compatibility stub
pwm: cros-ec: Drop documentation for dropped struct member
pwm: Drop two unused API functions
pwm: lpc18xx-sct: Don't modify the cached period of other PWM outputs
pwm: meson: Simplify using dev_err_probe()
pwm: stmpe: Silence duplicate error messages
pwm: Reduce number of pointer dereferences in pwm_device_request()
pwm: crc: Use consistent variable naming for driver data
pwm: omap-dmtimer: Drop locking
dt-bindings: pwm: ti,pwm-omap-dmtimer: Update binding for yaml
media: pwm-ir-tx: Trigger edges from hrtimer interrupt context
pwm: bcm2835: Allow PWM driver to be used in atomic context
pwm: Make it possible to apply PWM changes in atomic context
pwm: renesas: Remove unused include
pwm: Replace ENOTSUPP with EOPNOTSUPP
pwm: Rename pwm_apply_state() to pwm_apply_might_sleep()
pwm: Stop referencing pwm->chip
pwm: Update kernel doc for struct pwm_chip
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid
Pull HID updates from Jiri Kosina:
- assorted functional fixes for hid-steam ported from SteamOS betas
(Vicki Pfau)
- fix for custom sensor-hub sensors (hinge angle sensor and LISS
sensors) not working (Yauhen Kharuzhy)
- functional fix for handling Confidence in Wacom driver (Jason
Gerecke)
- support for Ilitek ili2901 touchscreen (Zhengqiao Xia)
- power management fix for Wacom userspace battery exporting
(Tatsunosuke Tobita)
- rework of wait-for-reset in order to reduce the need for
I2C_HID_QUIRK_NO_IRQ_AFTER_RESET qurk; the success rate is now 50%
better, but there are still further improvements to be made (Hans de
Goede)
- greatly improved coverage of Tablets in hid-selftests (Benjamin
Tissoires)
- support for Nintendo NSO controllers -- SNES, Genesis and N64 (Ryan
McClelland)
- support for controlling mcp2200 GPIOs (Johannes Roith)
- power management improvement for EHL OOB wakeup in intel-ish
(Kai-Heng Feng)
- other assorted device-specific fixes and code cleanups
* tag 'hid-for-linus-2024010801' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid: (53 commits)
HID: amd_sfh: Add a new interface for exporting ALS data
HID: amd_sfh: Add a new interface for exporting HPD data
HID: amd_sfh: rename float_to_int() to amd_sfh_float_to_int()
HID: i2c-hid: elan: Add ili2901 timing
dt-bindings: HID: i2c-hid: elan: Introduce Ilitek ili2901
HID: bpf: make bus_type const in struct hid_bpf_ops
HID: make ishtp_cl_bus_type const
HID: make hid_bus_type const
HID: hid-steam: Add gamepad-only mode switched to by holding options
HID: hid-steam: Better handling of serial number length
HID: hid-steam: Update list of identifiers from SDL
HID: hid-steam: Make client_opened a counter
HID: hid-steam: Clean up locking
HID: hid-steam: Disable watchdog instead of using a heartbeat
HID: hid-steam: Avoid overwriting smoothing parameter
HID: magicmouse: fix kerneldoc for struct magicmouse_sc
HID: sensor-hub: Enable hid core report processing for all devices
HID: wacom: Add additional tests of confidence behavior
HID: wacom: Correct behavior when processing some confidence == false touches
HID: nintendo: add support for nso controllers
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/deller/linux-fbdev
Pull fbdev updates from Helge Deller:
"Three fbdev drivers (~8500 lines of code) removed. The Carillo Ranch
fbdev driver is for an Intel product which was never shipped, and for
the intelfb and the amba-clcd drivers the drm drivers can be used
instead.
The other code changes are minor: some fb_deferred_io flushing fixes,
imxfb margin fixes and stifb cleanups.
Summary:
- Remove intelfb fbdev driver (Thomas Zimmermann)
- Remove amba-clcd fbdev driver (Linus Walleij)
- Remove vmlfb Carillo Ranch fbdev driver (Matthew Wilcox)
- fb_deferred_io flushing fixes (Nam Cao)
- imxfb code fixes and cleanups (Dario Binacchi)
- stifb primary screen detection cleanups (Thomas Zimmermann)"
* tag 'fbdev-for-6.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/linux-fbdev: (28 commits)
fbdev/intelfb: Remove driver
fbdev/hyperv_fb: Do not clear global screen_info
firmware/sysfb: Clear screen_info state after consuming it
fbdev/hyperv_fb: Remove firmware framebuffers with aperture helpers
drm/hyperv: Remove firmware framebuffers with aperture helper
fbdev/sis: Remove dependency on screen_info
video/logo: use %u format specifier for unsigned int values
video/sticore: Remove info field from STI struct
arch/parisc: Detect primary video device from device instance
fbdev/stifb: Allocate fb_info instance with framebuffer_alloc()
video/sticore: Store ROM device in STI struct
fbdev: flush deferred IO before closing
fbdev: flush deferred work in fb_deferred_io_fsync()
fbdev: amba-clcd: Delete the old CLCD driver
fbdev: Remove support for Carillo Ranch driver
fbdev: hgafb: fix kernel-doc comments
fbdev: mmp: Fix typo and wording in code comment
fbdev: fsl-diu-fb: Fix sparse warning due to virt_to_phys() prototype change
fbdev: imxfb: add '*/' on a separate line in block comment
fbdev: imxfb: use __func__ for function name
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media
Pull media updates from Mauro Carvalho Chehab:
- v4l core: subdev frame interval now supports which field
- v4l kapi: moves and renames the init_cfg pad op to init_state as an
internal op.
- new sensor drivers: gc0308, gc2145, Avnet Alvium, ov64a40, tw9900
- new camera driver: STM32 DCMIPP
- s5p-mfc has gained MFC v12 support
- new ISP driver added to staging: Starfive
- new stateful encoder/decoded: Wave5 codec It is found on the J721S2
SoC, JH7100 SoC, ssd202d SoC. Etc.
- fwnode gained support for MIPI "DisCo for Imaging"
(https://www.mipi.org/specifications/mipi-disco-imaging)
- as usual, lots of cleanups, fixups and driver improvements.
* tag 'media/v6.8-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (309 commits)
media: i2c: thp7312: select CONFIG_FW_LOADER
media: i2c: mt9m114: use fsleep() in place of udelay()
media: videobuf2: core: Rename min_buffers_needed field in vb2_queue
media: i2c: thp7312: Store frame interval in subdev state
media: docs: uAPI: Fix documentation of 'which' field for routing ioctls
media: docs: uAPI: Expand error documentation for invalid 'which' value
media: docs: uAPI: Clarify error documentation for invalid 'which' value
media: v4l2-subdev: Store frame interval in subdev state
media: v4l2-subdev: Add which field to struct v4l2_subdev_frame_interval
media: v4l2-subdev: Turn .[gs]_frame_interval into pad operations
media: v4l: subdev: Move out subdev state lock macros outside CONFIG_MEDIA_CONTROLLER
media: s5p-mfc: DPB Count Independent of VIDIOC_REQBUF
media: s5p-mfc: Load firmware for each run in MFCv12.
media: s5p-mfc: Set context for valid case before calling try_run
media: s5p-mfc: Add support for DMABUF for encoder
media: s5p-mfc: Add support for UHD encoding.
media: s5p-mfc: Add support for rate controls in MFCv12
media: s5p-mfc: Add YV12 and I420 multiplanar format support
media: s5p-mfc: Add initial support for MFCv12
media: s5p-mfc: Rename IS_MFCV10 macro
...
|
|
Pull MMC updates from Ulf Hansson:
"MMC core:
- Don't force a retune before eMMC RPMB switch
- Add optional HS400 tuning in HS400es initialization
- Add a sysfs node to for write-protect-group-size
- Add re-tuning test to the mmc-test module
- Use mrq.sbc to support close-ended ioctl requests
MMC host:
- mmci: Add support for SDIO in-band irqs for the stm32 variant
- mmc_spi: Remove broken support custom DMA mapped buffers
- mtk-sd: Improve and extend the support for tunings
- renesas_sdhi: Document support for the RZ/Five variant
- sdhci_am654: Drop support for the ti,otap-del-sel DT property
- sdhci-brcmstb: Add support for the brcm 74165b0 variant
- sdhci-msm: Add compatibles for IPQ4019 and IPQ8074
- sdhci-of-dwcmshc: Add support for the T-Head TH1520 variant
- sdhci-xenon: Add support for the Marvell ac5 variant"
* tag 'mmc-v6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc: (27 commits)
mmc: xenon: Add ac5 support via bounce buffer
dt-bindings: mmc: add Marvell ac5
mmc: sdhci-brcmstb: add new sdhci reset sequence for brcm 74165b0
dt-bindings: mmc: brcm,sdhci-brcmstb: Add support for 74165b0
mmc: core: Do not force a retune before RPMB switch
mmc: core: Add HS400 tuning in HS400es initialization
mmc: sdhci_omap: Fix TI SoC dependencies
mmc: sdhci_am654: Fix TI SoC dependencies
mmc: core: Add wp_grp_size sysfs node
mmc: mmc_test: Add re-tuning test
mmc: mmc_spi: remove custom DMA mapped buffers
dt-bindings: mmc: sdhci-msm: document dedicated IPQ4019 and IPQ8074
dt-bindings: mmc: synopsys-dw-mshc: add iommus for Intel SocFPGA
mmc: mtk-sd: Extend number of tuning steps
dt-bindings: mmc: mtk-sd: add tuning steps related property
mmc: sdhci-omap: don't misuse kernel-doc marker
mmc: mtk-sd: Increase the verbosity of msdc_track_cmd_data
mmc: core: Use mrq.sbc in close-ended ffu
mmc: sdhci_am654: Drop lookup for deprecated ti,otap-del-sel
mmc: sdhci-of-dwcmshc: Use logical OR instead of bitwise OR in dwcmshc_probe()
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/linux-pm
Pull pmdomain updates from Ulf Hansson:
"Core:
- Move the generic PM domain and its governor to the pmdomain
subsystem
- Drop the unused pm_genpd_opp_to_performance_state()
Providers:
- Convert some providers to let the ->remove() callback return void
- amlogic: Add support for G12A ISP power domain
- arm: Move the SCPI power-domain driver to the pmdomain subsystem
- arm: Move Kconfig options to the pmdomain subsystem
- qcom: Update part number to X1E80100 for the rpmhpd"
* tag 'pmdomain-v6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/linux-pm:
PM: domains: Move genpd and its governor to the pmdomain subsystem
PM: domains: Drop redundant header for genpd
PM: domains: Drop the unused pm_genpd_opp_to_performance_state()
PM: domains: fix domain_governor kernel-doc warnings
pmdomain: xilinx/zynqmp: Convert to platform remove callback returning void
pmdomain: qcom-cpr: Convert to platform remove callback returning void
pmdomain: imx93-pd: Convert to platform remove callback returning void
pmdomain: imx93-blk-ctrl: Convert to platform remove callback returning void
pmdomain: imx8mp-blk-ctrl: Convert to platform remove callback returning void
pmdomain: imx8m-blk-ctrl: Convert to platform remove callback returning void
pmdomain: imx-gpcv2: Convert to platform remove callback returning void
pmdomain: imx-gpc: Convert to platform remove callback returning void
pmdomain: imx-pgc: Convert to platform remove callback returning void
pmdomain: amlogic: meson-ee-pwrc: add support for G12A ISP power domain
dt-bindings: power: meson-g12a-power: document ISP power domain
firmware: arm_scpi: Move power-domain driver to the pmdomain dir
pmdomain: arm_scmi: Move Kconfig options to the pmdomain subsystem
pmdomain: qcom: rpmhpd: Update part number to X1E80100
dt-bindings: power: rpmpd: Update part number to X1E80100
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/johan/gnss
Pull GNSS updates from Johan Hovold:
- support for the reset pin found on some u-blox receivers
- use new regulator helper for the u-blox backup supply
* tag 'gnss-6.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/johan/gnss:
gnss: ubx: add support for the reset gpio
dt-bindings: gnss: u-blox: add "reset-gpios" binding
gnss: ubx: use new helper to remove open coded regulator handling
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux
Pull clk updates from Stephen Boyd:
"Only a couple new SoCs have support added this time, primarily for
Qualcomm SM8650 based on the diffstat. Otherwise this is a collection
of non-critical fixes and cleanups to various clk drivers and their DT
bindings.
Nothing is changed in the core clk framework this time, although
there's a patch to fix a basic clk type initialization function. In
general, this pile looks to be on the smaller side.
New Drivers:
- Global, display, gpu, tcsr, and rpmh clocks on Qualcomm SM8650
- Mediatek MT7988 SoC clocks
Updates:
- Update Zynqmp driver for Versal NET platforms
- Add clk driver for Versal clocking wizard IP
- Support for stm32mp25 clks
- Add glitch free PLL setting support to si5351 clk driver
- Add DSI clocks on Amlogic g12/sm1
- Add CSI and ISP clocks on Amlogic g12/sm1
- Document bindings for i.MX93 ANATOP clock driver
- Free clk_node in i.MX SCU driver for resource with different owner
- Update the LVDS clocks to be compatible with i.MX SCU firmware 1.15
- Fix the name of the fvco in i.MX pll14xx by renaming it to fout
- Add EtherNet TSN and PCIe clocks on the Renesas R-Car V4H SoC
- Add interrupt controller and Ethernet clocks and resets on Renesas
RZ/G3S
- Check reset monitor registers on Renesas RZ/G2L-alike SoCs
- Reuse reset functionality in the Renesas RZ/G2L clock driver
- Global and RPMh clock support for the Qualcomm X1E80100 SoC
- Support for the Stromer APCS PLL found in Qualcomm IPQ5018
- Add a new type of branch clock, with support for controlling
separate memory control bits, to the Qualcomm clk driver
- Use above new branch type in Qualcomm ECPRI clk driver for QDU1000
and QRU1000
- Add a number of missing clocks related to CSI2 on Qualcomm MSM8939
- Add support for the camera clock controller on Qualcomm SC8280XP
- Correct PLL configuration in GPU and video clock controllers for
Qualcomm SM8150
- Add runtime PM support and a few missing resets to Qualcomm SM8150
video clock controller
- Fix configuration of various GCC GDSCs on Qualcomm SM8550
- Mark shared RCGs appropriately in the Qualcomm SM8550 GCC driver
- Fix up GPU and display clock controllers PLL configuration settings
on Qualcomm SM8550
- Cleanup variable init in Allwinner nkm module
- Convert various DT bindings to YAML
- A few kernel-doc fixes for Samsung SoC clock controllers"
* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (93 commits)
clk: mediatek: add drivers for MT7988 SoC
clk: mediatek: add pcw_chg_bit control for PLLs of MT7988
dt-bindings: clock: mediatek: add clock controllers of MT7988
dt-bindings: reset: mediatek: add MT7988 ethwarp reset IDs
dt-bindings: clock: mediatek: add MT7988 clock IDs
clk: mediatek: mt8188-topckgen: Refactor parents for top_dp/edp muxes
clk: mediatek: mt8195-topckgen: Refactor parents for top_dp/edp muxes
clk: mediatek: clk-mux: Support custom parent indices for muxes
dt-bindings: clock: sophgo: Add clock controller of CV1800 series SoC
clk: starfive: jh7100: Add CLK_SET_RATE_PARENT to gmac_tx
clk: starfive: Add flags argument to JH71X0__MUX macro
clk: imx: pll14xx: change naming of fvco to fout
clk: imx: clk-imx8qxp: fix LVDS bypass, pixel and phy clocks
clk: imx: scu: Fix memory leak in __imx_clk_gpr_scu()
clk: fixed-rate: fix clk_hw_register_fixed_rate_with_accuracy_parent_hw
clk: qcom: dispcc-sm8650: Add test_ctl parameters to PLL config
clk: qcom: gpucc-sm8650: Add test_ctl parameters to PLL config
clk: qcom: dispcc-sm8550: Use the correct PLL configuration function
clk: qcom: dispcc-sm8550: Update disp PLL settings
clk: qcom: gpucc-sm8550: Update GPU PLL settings
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux
Pull gpio updates from Bartosz Golaszewski:
"We have two new drivers, an assortment of updates and cleanups to many
others, and first part of the big rework of the core GPIOLIB that's
currently underway.
Add to that some code shrink in the character device module and
updates to DT bindings and that's pretty much it.
Core GPIOLIB:
- protect the global list of GPIO devices with a read-write semaphore
as it is rarely modified but can be traversed by multiple readers
at once
- remove GPIO devices from the global list when they are
*unregistered* and not when they are *released* (which only happens
when the last reference is dropped) as this may lead to a
successful lookup of an unregistered device
- remove the unnecessary "extra_checks" switch
- rename functions that are called with a lock taken
- remove duplicate includes
Character device handling:
- use locking guards to reduce the code size
- allocate the big linereq structure using the more suitable
kvzalloc()
- redulce the size of critical sections
- improve documentation
- move the debounce_period_us field out of struct gpio_desc
New drivers:
- Nuvoton NPCM SGPIO driver for BMC NPCM7xx/NPCM8xx
- Realtek DHC (Digital Home Center) SoC GPIO driver
Driver improvements:
- replace gpiochip_is_requested() with a safer alternative in the
form of gpiochip_dup_line_label() as the former returns a pointer
to a string that can be deleted
- implement the dbg_show() callback in gpio-sim
- improve the coding style for local variables by removing
unnecessary tabs
- use generic device properties instead of OF variants in gpio-mmio
- use the preferred coding style for __free() in gpio-mockup
- reuse PM ops from the gpio-tangier in gpio-elkhartlake
- rework PM and use cleanup helpers in gpio-tangier
- fix the EIC configuration in gpio-pmic-eic-sprd
- remove the unneeded call to platform_set_drvdata() in gpio-sifive
- use generic GPIO helpers for driver callbacks in gpio-dwapb
- add clock support on certain pins of gpio-ixp4xx
- don't use the core-specific DEBUG_GPIO switch in drivers
- kerneldoc improvements
DT bindings:
- add bindings for the new Realtek and Nuvoton devices
- allow gpio-ranges in gpio-dwapb
- support GPIO hogs in gpio-rockchip
- describe the label property in gpio-zynqmp-modepin
Other:
- header cleanups
- forward declarations cleanups"
* tag 'gpio-updates-for-v6.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux: (55 commits)
gpiolib: replace the GPIO device mutex with a read-write semaphore
gpiolib: remove the GPIO device from the list when it's unregistered
gpio: nuvoton: Add Nuvoton NPCM sgpio driver
dt-bindings: gpio: add NPCM sgpio driver bindings
gpio: rtd: Add support for Realtek DHC(Digital Home Center) RTD SoCs
dt-bindings: gpio: realtek: Add realtek,rtd-gpio
gpio: pmic-eic-sprd: Configure the bit corresponding to the EIC through offset
gpio: dwapb: Use generic request, free and set_config
gpio: sysfs: drop tabs from local variable declarations
gpiolib: drop tabs from local variable declarations
gpiolib: remove extra_checks
gpio: tps65219: don't use CONFIG_DEBUG_GPIO
gpiolib: cdev: replace locking wrappers for gpio_device with guards
gpiolib: cdev: replace locking wrappers for config_mutex with guards
gpiolib: cdev: allocate linereq using kvzalloc()
gpiolib: cdev: include overflow.h
gpiolib: cdev: reduce locking in gpio_desc_to_lineinfo()
gpiolib: cdev: improve documentation of get/set values
gpiolib: cdev: fully adopt guard() and scoped_guard()
gpiolib: remove debounce_period_us from struct gpio_desc
...
|
|
git://www.linux-watchdog.org/linux-watchdog
Pull watchdog updates from Wim Van Sebroeck:
- Add Mediatek MT7988 watchdog
- Add IT8659 watchdog
- watchdog: set cdev owner before adding
- hpwdt: Only claim UNKNOWN NMI if from iLO
- Various other fixes and improvements
* tag 'linux-watchdog-6.8-rc1' of git://www.linux-watchdog.org/linux-watchdog: (30 commits)
watchdog: mlx_wdt: fix all kernel-doc warnings
dt-bindings: watchdog: qcom,pm8916-wdt: add parent spmi node to example
dt-bindings: watchdog: nxp,pnx4008-wdt: convert txt to yaml
dt-bindings: watchdog: qca,ar7130-wdt: convert txt to yaml
dt-bindings: watchdog: intel,keembay: reference common watchdog schema
dt-bindings: watchdog: re-order entries to match coding convention
watchdog: it87_wdt: Keep WDTCTRL bit 3 unmodified for IT8784/IT8786
watchdog: it87_wdt: Add IT8659 ID
watchdog: it87_wdt: Remove redundant max_units setting
watchdog: it87_wdt: add blank line after variable declaration
dt-bindings: wdt: Add ts72xx
dt-bindings: watchdog: dlg,da9062-watchdog: Document DA9063 watchdog
dt-bindings: watchdog: dlg,da9062-watchdog: Add fallback for DA9061 watchdog
watchdog: rti_wdt: Drop runtime pm reference count when watchdog is unused
watchdog: starfive: add lock annotations to fix context imbalances
watchdog: mediatek: mt7988: add wdt support
dt-bindings: watchdog: mediatek,mtk-wdt: add MT7988 watchdog and toprgu
dt-bindings: watchdog: realtek,rtd1295-watchdog: convert txt to yaml
watchdog: bcm2835_wdt: Fix WDIOC_SETTIMEOUT handling
watchdog/hpwdt: Remove unused variable
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging
Pull hwmon updates from Guenter Roeck:
"New drivers:
- pmbus: Support for MPS Multi-phase mp2856/mp2857 controller
- pmbus: Support for MPS Multi-phase mp5990
- Driver for Gigabyte AORUS Waterforce AIO coolers
Added support to existing drivers:
- lm75: Support for AMS AS6200 temperature sensor
- k10temp: Support for AMD Family 19h Model 8h
- max31827: Support for max31828 and max31829
- sht3x: Support for sts3x
- Add support for WMI SMM interface, and various related improvements.
Add support for Optiplex 7000
- emc1403: Support for EMC1442
- npcm750-pwm-fan: Support for NPCM8xx
- nct6775: Add support for 2 additional fan controls
Minor improvements and bug fixes:
- gigabyte_waterforce: Mark status report as received under a spinlock
- aquacomputer_d5next: Remove unneeded CONFIG_DEBUG_FS #ifdef
- gpio-fan: Convert txt bindings to yaml
- smsc47m1: Various cleanups / improvements
- corsair-cpro: use NULL instead of 0
- hp-wmi-sensors: Fix failure to load on EliteDesk 800 G6
- tmp513: Various cleanups
- peci/dimmtemp: Bump timeout
- pc87360: Bounds check data->innr usage
- nct6775: Fix fan speed set failure in automatic mode
- ABI: sysfs-class-hwmon: document various missing attributes
- lm25066, max6650, nct6775: Use i2c_get_match_data()
- aspeed-pwm-tacho: Fix -Wstringop-overflow warning"
* tag 'hwmon-for-v6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: (59 commits)
hwmon: (gigabyte_waterforce) Mark status report as received under a spinlock
hwmon: (lm75) Fix tmp112 default config
hwmon: (lm75) Add AMS AS6200 temperature sensor
dt-bindings: hwmon: (lm75) Add AMS AS6200 temperature sensor
hwmon: (lm75) remove now-unused include
hwmon: (pmbus) Add support for MPS Multi-phase mp2856/mp2857 controller
dt-bindings: Add MP2856/MP2857 voltage regulator device
hwmon: (aquacomputer_d5next) Remove unneeded CONFIG_DEBUG_FS #ifdef
dt-bindings: hwmon: gpio-fan: Convert txt bindings to yaml
hwmon: (k10temp) Add support for AMD Family 19h Model 8h
hwmon: Add driver for Gigabyte AORUS Waterforce AIO coolers
hwmon: (smsc47m1) Rename global platform device variable
hwmon: (smsc47m1) Simplify device registration
hwmon: (smsc47m1) Convert to platform remove callback returning void
hwmon: (smsc47m1) Mark driver struct with __refdata to prevent section mismatch
MAINTAINERS: Add maintainer for Baikal-T1 PVT hwmon driver
hwmon: (sht3x) add sts3x support
hwmon: (pmbus) Add ltc4286 driver
dt-bindings: hwmon: Add lltc ltc4286 driver bindings
hwmon: (max31827) Add custom attribute for resolution
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound updates from Takashi Iwai:
"It was a calm development cycle. There were an ALSA core extension for
subformat PCM bits and a few ASoC core changes to support N:M
mappings, while the most of remaining changes are driver-specific.
Core:
- API extensions for properly limiting PCM format bits via subformat
- Enhanced support for N:M CPU:CODEC mappings in the core and in
audio-graph-card2
ASoC:
- Lots of SOF updates: fallback support to older IPC versions,
notification on control changes with IPC4. Also supports for ACPI
parse for the ES83xx driver that reduces quirks.
- Device tree support for describing parts of the card which can be
active over suspend (for very low power playback or wake word use
cases)
- Support for more AMD and Intel systems, NXP i.MX8m MICFIL, Qualcomm
SM8250, SM8550, SM8650 and X1E80100
- Drop of Freescale MPC8610 code that is no longer supported
HD-audio:
- More CS35L41 codec extensions for Dell, HP and Lenovo models
- TAS2781 codec extensions for Lenovo and co
- New PCM subformat supports
Others:
- More enhancement for Scarlett2 USB mixer support
- Various kselftest fixes"
* tag 'sound-6.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (337 commits)
kselftest/alsa - conf: Stringify the printed errno in sysfs_get()
kselftest/alsa - mixer-test: Fix the print format specifier warning
kselftest/alsa - mixer-test: Fix the print format specifier warning
kselftest/alsa - mixer-test: fix the number of parameters to ksft_exit_fail_msg()
ALSA: hda/tas2781: annotate calibration data endianness
ALSA: hda/realtek: Fix mute and mic-mute LEDs for HP Envy X360 13-ay0xxx
ALSA: hda/conexant: Fix headset auto detect fail in cx8070 and SN6140
ALSA: ac97: fix build regression
ALSA: hda: cs35l41: Support more HP models without _DSD
ALSA: hda/tas2781: add fixup for Lenovo 14ARB7
ALSA: hda/tas2781: add TAS2563 support for 14ARB7
ALSA: hda/tas2781: add configurable global i2c address
ALSA: hda/tas2781: add ptrs to calibration functions
ALSA: hda: Add driver properties for cs35l41 for Lenovo Legion Slim 7 Gen 8 serie
ALSA: hda/realtek: enable SND_PCI_QUIRK for Lenovo Legion Slim 7 Gen 8 (2023) serie
ALSA: hda/tas2781: configure the amp after firmware load
ALSA: mark all struct bus_type as const
ASoC: pxa: sspa: Don't select SND_ARM
ASoC: rt5663: cancel the work when system suspends
ALSA: scarlett2: Add PCM Input Switch for Solo Gen 4
...
|
|
Pull drm updates from Dave Airlie:
"This contains two major new drivers:
- imagination is a first driver for Imagination Technologies devices,
it only covers very specific devices, but there is hope to grow it
- xe is a reboot of the i915 GPU (shares display) side using a more
upstream focused development model, and trying to maximise code
sharing. It's not enabled for any hw by default, and will hopefully
get switched on for Intel's Lunarlake.
This also drops a bunch of the old UMS ioctls. It's been dead long
enough.
amdgpu has a bunch of new color management code that is being used in
the Steam Deck.
amdgpu also has a new ACPI WBRF interaction to help avoid radio
interference.
Otherwise it's the usual lots of changes in lots of places.
Detailed summary:
new drivers:
- imagination - new driver for Imagination Technologies GPU
- xe - new driver for Intel GPUs using core drm concepts
core:
- add CLOSE_FB ioctl
- remove old UMS ioctls
- increase max objects to accomodate AMD color mgmt
encoder:
- create per-encoder debugfs directory
edid:
- split out drm_eld
- SAD helpers
- drop edid_firmware module parameter
format-helper:
- cache format conversion buffers
sched:
- move from kthread to workqueue
- rename some internals
- implement dynamic job-flow control
gpuvm:
- provide more features to handle GEM objects
client:
- don't acquire module reference
displayport:
- add mst path property documentation
fdinfo:
- alignment fix
dma-buf:
- add fence timestamp helper
- add fence deadline support
bridge:
- transparent aux-bridge for DP/USB-C
- lt8912b: add suspend/resume support and power regulator support
panel:
- edp: AUO B116XTN02, BOE NT116WHM-N21,836X2, NV116WHM-N49
- chromebook panel support
- elida-kd35t133: rework pm
- powkiddy RK2023 panel
- himax-hx8394: drop prepare/unprepare and shutdown logic
- BOE BP101WX1-100, Powkiddy X55, Ampire AM8001280G
- Evervision VGG644804, SDC ATNA45AF01
- nv3052c: register docs, init sequence fixes, fascontek FS035VG158
- st7701: Anbernic RG-ARC support
- r63353 panel controller
- Ilitek ILI9805 panel controller
- AUO G156HAN04.0
simplefb:
- support memory regions
- support power domains
amdgpu:
- add new 64-bit sequence number infrastructure
- add AMD specific color management
- ACPI WBRF support for RF interference handling
- GPUVM updates
- RAS updates
- DCN 3.5 updates
- Rework PCIe link speed handling
- Document GPU reset types
- DMUB fixes
- eDP fixes
- NBIO 7.9/7.11 updates
- SubVP updates
- XGMI PCIe state dumping for aqua vanjaram
- GFX11 golden register updates
- enable tunnelling on high pri compute
amdkfd:
- Migrate TLB flushing logic to amdgpu
- Trap handler fixes
- Fix restore workers handling on suspend/resume
- Fix possible memory leak in pqm_uninit()
- support import/export of dma-bufs using GEM handles
radeon:
- fix possible overflows in command buffer checking
- check for errors in ring_lock
i915:
- reorg display code for reuse in xe driver
- fdinfo memory stats printing
- DP MST bandwidth mgmt improvements
- DP panel replay enabling
- MTL C20 phy state verification
- MTL DP DSC fractional bpp support
- Audio fastset support
- use dma_fence interfaces instead of i915_sw_fence
- Separate gem and display code
- AUX register macro refactoring
- Separate display module/device parameters
- Move display capabilities debugfs under display
- Makefile cleanups
- Register cleanups
- Move display lock inits under display/
- VLV/CHV DPIO PHY register and interface refactoring
- DSI VBT sequence refactoring
- C10/C20 PHY PLL hardware readout
- DPLL code cleanups
- Cleanup PXP plane protection checks
- Improve display debug msgs
- PSR selective fetch fixes/improvements
- DP MST fixes
- Xe2LPD FBC restrictions removed
- DGFX uses direct VBT pin mapping
- more MTL WAs
- fix MTL eDP bug
- eliminate use of kmap_atomic
habanalabs:
- sysfs entry to identify a device minor id with debugfs path
- sysfs entry to expose device module id
- add signed device info retrieval through INFO ioctl
- add Gaudi2C device support
- pcie reset prepare/done hooks
msm:
- Add support for SDM670, SM8650
- Handle the CFG interconnect to fix the obscure hangs / timeouts
- Kconfig fix for QMP dependency
- use managed allocators
- DPU: SDM670, SM8650 support
- DPU: Enable SmartDMA on SM8350 and SM8450
- DP: enable runtime PM support
- GPU: add metadata UAPI
- GPU: move devcoredumps to GPU device
- GPU: convert to drm_exec
ivpu:
- update FW API
- new debugfs file
- a new NOP job submission test mode
- improve suspend/resume
- PM improvements
- MMU PT optimizations
- firmware profile frequency support
- support for uncached buffers
- switch to gem shmem helpers
- replace kthread with threaded irqs
rockchip:
- rk3066_hdmi: convert to atomic
- vop2: support nv20 and nv30
- rk3588 support
mediatek:
- use devm_platform_ioremap_resource
- stop using iommu_present
- MT8188 VDOSYS1 display support
panfrost:
- PM improvements
- improve interrupt handling as poweroff
qaic:
- allow to run with single MSI
- support host/device time sync
- switch to persistent DRM devices
exynos:
- fix potential error pointer dereference
- fix wrong error checking
- add missing call to drm_atomic_helper_shutdown
omapdrm:
- dma-fence lockdep annotation fix
tidss:
- dma-fence lockdep annotation fix
- support for AM62A7
v3d:
- BCM2712 - rpi5 support
- fdinfo + gputop support
- uapi for CPU job handling
virtio-gpu:
- add context debug name"
* tag 'drm-next-2024-01-10' of git://anongit.freedesktop.org/drm/drm: (2340 commits)
drm/amd/display: Allow z8/z10 from driver
drm/amd/display: fix bandwidth validation failure on DCN 2.1
drm/amdgpu: apply the RV2 system aperture fix to RN/CZN as well
drm/amd/display: Move fixpt_from_s3132 to amdgpu_dm
drm/amd/display: Fix recent checkpatch errors in amdgpu_dm
Revert "drm/amdkfd: Relocate TBA/TMA to opposite side of VM hole"
drm/amd/display: avoid stringop-overflow warnings for dp_decide_lane_settings()
drm/amd/display: Fix power_helpers.c codestyle
drm/amd/display: Fix hdcp_log.h codestyle
drm/amd/display: Fix hdcp2_execution.c codestyle
drm/amd/display: Fix hdcp_psp.h codestyle
drm/amd/display: Fix freesync.c codestyle
drm/amd/display: Fix hdcp_psp.c codestyle
drm/amd/display: Fix hdcp1_execution.c codestyle
drm/amd/pm/smu7: fix a memleak in smu7_hwmgr_backend_init
drm/amdkfd: Fix iterator used outside loop in 'kfd_add_peer_prop()'
drm/amdgpu: Drop 'fence' check in 'to_amdgpu_amdkfd_fence()'
drm/amdkfd: Confirm list is non-empty before utilizing list_first_entry in kfd_topology.c
drm/amdgpu: Fix '*fw' from request_firmware() not released in 'amdgpu_ucode_request()'
drm/amdgpu: Fix variable 'mca_funcs' dereferenced before NULL check in 'amdgpu_mca_smu_get_mca_entry()'
...
|
|
Implement the workaround for ARM Cortex-A510 erratum 3117295. On an
affected Cortex-A510 core, a speculatively executed unprivileged load
might leak data from a privileged load via a cache side channel. The
issue only exists for loads within a translation regime with the same
translation (e.g. same ASID and VMID). Therefore, the issue only affects
the return to EL0.
The erratum and workaround are the same as ARM Cortex-A520 erratum
2966298, so reuse the existing workaround.
Cc: stable@vger.kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
Reviewed-by: Mark Rutland <mark.rutland@arm.com>
Link: https://lore.kernel.org/r/20240110-arm-errata-a510-v1-2-d02bc51aeeee@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
|
|
From looking at the PCI IDs, every device supported by intelfb is
also supported by i915. Anyone still using intelfb should please
move on to i915, which does everything intelfb does but better.
Removing intelfb is motivated by the driver's excessive use of the
global screen_info state. The state belongs to architecture and
firmware code; device drivers should not attempt to access it. But
fixing intelfb would require a significant change in the driver's
probing logic. As intelfb has been obsolete for nearly 2 decades,
it is probably not worth the effort. Let's just remove it. Also
remove the related documentation.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Maik Broemme <mbroemme@libmpq.org>
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs
Pull f2fs update from Jaegeuk Kim:
"In this series, we've some progress to support Zoned block device
regarding to the power-cut recovery flow and enabling
checkpoint=disable feature which is essential for Android OTA.
Other than that, some patches touched sysfs entries and tracepoints
which are minor, while several bug fixes on error handlers and
compression flows are good to improve the overall stability.
Enhancements:
- enable checkpoint=disable for zoned block device
- sysfs entries such as discard status, discard_io_aware, dir_level
- tracepoints such as f2fs_vm_page_mkwrite(), f2fs_rename(),
f2fs_new_inode()
- use shared inode lock during f2fs_fiemap() and f2fs_seek_block()
Bug fixes:
- address some power-cut recovery issues on zoned block device
- handle errors and logics on do_garbage_collect(),
f2fs_reserve_new_block(), f2fs_move_file_range(),
f2fs_recover_xattr_data()
- don't set FI_PREALLOCATED_ALL for partial write
- fix to update iostat correctly in f2fs_filemap_fault()
- fix to wait on block writeback for post_read case
- fix to tag gcing flag on page during block migration
- restrict max filesize for 16K f2fs
- fix to avoid dirent corruption
- explicitly null-terminate the xattr list
There are also several clean-up patches to remove dead codes and
better readability"
* tag 'f2fs-for-6.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs: (33 commits)
f2fs: show more discard status by sysfs
f2fs: Add error handling for negative returns from do_garbage_collect
f2fs: Constrain the modification range of dir_level in the sysfs
f2fs: Use wait_event_freezable_timeout() for freezable kthread
f2fs: fix to check return value of f2fs_recover_xattr_data
f2fs: don't set FI_PREALLOCATED_ALL for partial write
f2fs: fix to update iostat correctly in f2fs_filemap_fault()
f2fs: fix to check compress file in f2fs_move_file_range()
f2fs: fix to wait on block writeback for post_read case
f2fs: fix to tag gcing flag on page during block migration
f2fs: add tracepoint for f2fs_vm_page_mkwrite()
f2fs: introduce f2fs_invalidate_internal_cache() for cleanup
f2fs: update blkaddr in __set_data_blkaddr() for cleanup
f2fs: introduce get_dnode_addr() to clean up codes
f2fs: delete obsolete FI_DROP_CACHE
f2fs: delete obsolete FI_FIRST_BLOCK_WRITTEN
f2fs: Restrict max filesize for 16K f2fs
f2fs: let's finish or reset zones all the time
f2fs: check write pointers when checkpoint=disable
f2fs: fix write pointers on zoned device after roll forward
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull dcache updates from Al Viro:
"Change of locking rules for __dentry_kill(), regularized refcounting
rules in that area, assorted cleanups and removal of weird corner
cases (e.g. now ->d_iput() on child is always called before the parent
might hit __dentry_kill(), etc)"
* tag 'pull-dcache' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (40 commits)
dcache: remove unnecessary NULL check in dget_dlock()
kill DCACHE_MAY_FREE
__d_unalias() doesn't use inode argument
d_alloc_parallel(): in-lookup hash insertion doesn't need an RCU variant
get rid of DCACHE_GENOCIDE
d_genocide(): move the extern into fs/internal.h
simple_fill_super(): don't bother with d_genocide() on failure
nsfs: use d_make_root()
d_alloc_pseudo(): move setting ->d_op there from the (sole) caller
kill d_instantate_anon(), fold __d_instantiate_anon() into remaining caller
retain_dentry(): introduce a trimmed-down lockless variant
__dentry_kill(): new locking scheme
d_prune_aliases(): use a shrink list
switch select_collect{,2}() to use of to_shrink_list()
to_shrink_list(): call only if refcount is 0
fold dentry_kill() into dput()
don't try to cut corners in shrink_lock_dentry()
fold the call of retain_dentry() into fast_dput()
Call retain_dentry() with refcount 0
dentry_kill(): don't bother with retain_dentry() on slow path
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull rename updates from Al Viro:
"Fix directory locking scheme on rename
This was broken in 6.5; we really can't lock two unrelated directories
without holding ->s_vfs_rename_mutex first and in case of same-parent
rename of a subdirectory 6.5 ends up doing just that"
* tag 'pull-rename' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
rename(): avoid a deadlock in the case of parents having no common ancestor
kill lock_two_inodes()
rename(): fix the locking of subdirectories
f2fs: Avoid reading renamed directory if parent does not change
ext4: don't access the source subdirectory content on same-directory rename
ext2: Avoid reading renamed directory if parent does not change
udf_rename(): only access the child content on cross-directory rename
ocfs2: Avoid touching renamed directory if parent does not change
reiserfs: Avoid touching renamed directory if parent does not change
|
|
Pull documentation update from Jonathan Corbet:
"Another moderately busy cycle for documentation, including:
- The minimum Sphinx requirement has been raised to 2.4.4, following
a warning that was added in 6.2
- Some reworking of the Documentation/process front page to,
hopefully, make it more useful
- Various kernel-doc tweaks to, for example, make it deal properly
with __counted_by annotations
- We have also restored a warning for documentation of nonexistent
structure members that disappeared a while back. That had the
delightful consequence of adding some 600 warnings to the docs
build. A sustained effort by Randy, Vegard, and myself has
addressed almost all of those, bringing the documentation back into
sync with the code. The fixes are going through the appropriate
maintainer trees
- Various improvements to the HTML rendered docs, including automatic
links to Git revisions and a nice new pulldown to make translations
easy to access
- Speaking of translations, more of those for Spanish and Chinese
... plus the usual stream of documentation updates and typo fixes"
* tag 'docs-6.8' of git://git.lwn.net/linux: (57 commits)
MAINTAINERS: use tabs for indent of CONFIDENTIAL COMPUTING THREAT MODEL
A reworked process/index.rst
ring-buffer/Documentation: Add documentation on buffer_percent file
Translated the RISC-V architecture boot documentation.
Docs: remove mentions of fdformat from util-linux
Docs/zh_CN: Fix the meaning of DEBUG to pr_debug()
Documentation: move driver-api/dcdbas to userspace-api/
Documentation: move driver-api/isapnp to userspace-api/
Documentation/core-api : fix typo in workqueue
Documentation/trace: Fixed typos in the ftrace FLAGS section
kernel-doc: handle a void function without producing a warning
scripts/get_abi.pl: ignore some temp files
docs: kernel_abi.py: fix command injection
scripts/get_abi: fix source path leak
CREDITS, MAINTAINERS, docs/process/howto: Update man-pages' maintainer
docs: translations: add translations links when they exist
kernel-doc: Align quick help and the code
MAINTAINERS: add reviewer for Spanish translations
docs: ignore __counted_by attribute in structure definitions
scripts: kernel-doc: Clarify missing struct member description
..
|
|
Pull SCSI updates from James Bottomley:
"Updates to the usual drivers (ufs, mpi3mr, mpt3sas, lpfc, fnic,
hisi_sas, arcmsr, ) plus the usual assorted minor fixes and updates.
This time around there's only a single line update to the core, so
nothing major and barely anything minor"
* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (135 commits)
scsi: ufs: core: Simplify ufshcd_auto_hibern8_update()
scsi: ufs: core: Rename ufshcd_auto_hibern8_enable() and make it static
scsi: ufs: qcom: Fix ESI vector mask
scsi: ufs: host: Fix kernel-doc warning
scsi: hisi_sas: Correct the number of global debugfs registers
scsi: hisi_sas: Rollback some operations if FLR failed
scsi: hisi_sas: Check before using pointer variables
scsi: hisi_sas: Replace with standard error code return value
scsi: hisi_sas: Set .phy_attached before notifing phyup event HISI_PHYE_PHY_UP_PM
scsi: ufs: core: Add sysfs node for UFS RTC update
scsi: ufs: core: Add UFS RTC support
scsi: ufs: core: Add ufshcd_is_ufs_dev_busy()
scsi: ufs: qcom: Remove unused definitions
scsi: ufs: qcom: Use ufshcd_rmwl() where applicable
scsi: ufs: qcom: Remove support for host controllers older than v2.0
scsi: ufs: qcom: Simplify ufs_qcom_{assert/deassert}_reset
scsi: ufs: qcom: Initialize cycles_in_1us variable in ufs_qcom_set_core_clk_ctrl()
scsi: ufs: qcom: Sort includes alphabetically
scsi: ufs: qcom: Remove unused ufs_qcom_hosts struct array
scsi: ufs: qcom: Use dev_err_probe() to simplify error handling of devm_gpiod_get_optional()
...
|
|
Convert Altera's bridges to yaml with using fpga-bridge.yaml.
Signed-off-by: Michal Simek <michal.simek@amd.com>
Reviewed-by: Xu Yilun <yilun.xu@intel.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/07d646a6d82cc21b100e45ced7cae3ef05faa2cc.1704807147.git.michal.simek@amd.com
Signed-off-by: Rob Herring <robh@kernel.org>
|
|
Convert the generic fpga bridge DT binding to json-schema.
Signed-off-by: Michal Simek <michal.simek@amd.com>
Reviewed-by: Xu Yilun <yilun.xu@intel.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/14558a4dcfab5255c1683015287e9c7f48b1afc2.1704807147.git.michal.simek@amd.com
Signed-off-by: Rob Herring <robh@kernel.org>
|
|
Add Silicon Mortion Technology Corporation
https://www.siliconmotion.com/
Signed-off-by: Yoshinori Sato <ysato@users.sourceforge.jp>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/c8aaf67e3fcdb7e60632c53a784691aabfc7733e.1704788539.git.ysato@users.sourceforge.jp
Signed-off-by: Rob Herring <robh@kernel.org>
|
|
Pull Rust updates from Miguel Ojeda:
"Another routine one in terms of features. In terms of lines, this time
the 'alloc' version upgrade is less prominent, given that it was
fairly small (and we did not have two upgrades)
Toolchain and infrastructure:
- Upgrade to Rust 1.74.1
The patch release includes a fix for an ICE that the Apple AGX GPU
driver was hitting
- Support 'srctree'-relative links in Rust code documentation
- Automate part of the manual constants handling (i.e. the ones not
recognised by 'bindgen')
- Suppress searching builtin sysroot to avoid confusion with
installed sysroots, needed for the to-be-merged arm64 support which
uses a builtin target
- Ignore '__preserve_most' functions for 'bindgen'
- Reduce header inclusion bloat in exports
'kernel' crate:
- Implement 'Debug' for 'CString'
- Make 'CondVar::wait()' an uninterruptible wait
'macros' crate:
- Update 'paste!' to accept string literals
- Improve '#[vtable]' documentation
Documentation:
- Add testing section (KUnit and 'rusttest' target)
- Remove 'CC=clang' mentions
- Clarify that 'rustup override' applies to build directory"
* tag 'rust-6.8' of https://github.com/Rust-for-Linux/linux:
docs: rust: Clarify that 'rustup override' applies to build directory
docs: rust: Add rusttest info
docs: rust: remove `CC=clang` mentions
rust: support `srctree`-relative links
rust: sync: Makes `CondVar::wait()` an uninterruptible wait
rust: upgrade to Rust 1.74.1
rust: Suppress searching builtin sysroot
rust: macros: improve `#[vtable]` documentation
rust: macros: update 'paste!' macro to accept string literals
rust: bindings: rename const binding using sed
rust: Ignore preserve-most functions
rust: replace <linux/module.h> with <linux/export.h> in rust/exports.c
rust: kernel: str: Implement Debug for CString
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull SoC driver updates from Arnd Bergmann:
"A new drivers/cache/ subsystem is added to contain drivers for
abstracting cache flush methods on riscv and potentially others, as
this is needed for handling non-coherent DMA but several SoCs require
nonstandard hardware methods for it.
op-tee gains support for asynchronous notification with FF-A, as well
as support for a system thread for executing in secure world.
The tee, reset, bus, memory and scmi subsystems have a couple of minor
updates.
Platform specific soc driver changes include:
- Samsung Exynos gains driver support for Google GS101 (Tensor G1)
across multiple subsystems
- Qualcomm Snapdragon gains support for SM8650 and X1E along with
added features for some other SoCs
- Mediatek adds support for "Smart Voltage Scaling" on MT8186 and
MT8195, and driver support for MT8188 along with some code
refactoring.
- Microchip Polarfire FPGA support for "Auto Update" of the FPGA
bitstream
- Apple M1 mailbox driver is rewritten into a SoC driver
- minor updates on amlogic, mvebu, ti, zynq, imx, renesas and
hisilicon"
* tag 'soc-drivers-6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (189 commits)
memory: ti-emif-pm: Convert to platform remove callback returning void
memory: ti-aemif: Convert to platform remove callback returning void
memory: tegra210-emc: Convert to platform remove callback returning void
memory: tegra186-emc: Convert to platform remove callback returning void
memory: stm32-fmc2-ebi: Convert to platform remove callback returning void
memory: exynos5422-dmc: Convert to platform remove callback returning void
memory: renesas-rpc-if: Convert to platform remove callback returning void
memory: omap-gpmc: Convert to platform remove callback returning void
memory: mtk-smi: Convert to platform remove callback returning void
memory: jz4780-nemc: Convert to platform remove callback returning void
memory: fsl_ifc: Convert to platform remove callback returning void
memory: fsl-corenet-cf: Convert to platform remove callback returning void
memory: emif: Convert to platform remove callback returning void
memory: brcmstb_memc: Convert to platform remove callback returning void
memory: brcmstb_dpfe: Convert to platform remove callback returning void
soc: qcom: llcc: Fix LLCC_TRP_ATTR2_CFGn offset
firmware: qcom: qseecom: fix memory leaks in error paths
dt-bindings: clock: google,gs101: rename CMU_TOP gate defines
soc: qcom: llcc: Fix typo in kernel-doc
dt-bindings: soc: qcom,aoss-qmp: document the X1E80100 Always-On Subsystem side channel
...
|
|
Pull SoC DT updates from Arnd Bergmann:
"There is one new SoC for each 32-bit Arm and 64-bit RISC-V, but both
the Rockchips rv1109 and Sopgho CV1812H are just minor variations of
already supported chips.
The other six new SoCs are all part of existing arm64 families, but
are somewhat more interesting:
- Samsung ExynosAutov920 is an automotive chip, and the first one we
support based on the Cortex-A78AE core with lockstep mode.
- Google gs101 (Tensor G1) is the chip used in a number of Pixel
phones, and is grouped with Samsung Exynos here since it is based
on the same SoC design, sharing most of its IP blocks with that
series.
- MediaTek MT8188 is a new chip used for mid-range tablets and
Chromebooks, using two Cortex-A78 cores where the older MT8195 had
four of them.
- Qualcomm SM8650 (Snapdragon 8 Gen 3) is their current top range
phone SoC and the first supported chip based on Cortex-X4,
Cortex-A720 and Cortex-A520.
- Qualcomm X1E80100 (Snapdragon X Elite) in turn is the latest Laptop
chip using the custom Oryon cores.
- Unisoc UMS9620 (Tanggula 7 series) is a 5G phone SoC based on
Cortex-A76 and Cortex-A55
In terms of boards, we have
- Five old Microsoft Lumia phones, the HTC One Mini 2, Motorola Moto
G 4G, and Huawei Honor 5X/GR5, all based on Snapdragon SoCs.
- Multiple Rockchips mobile gaming systems (Anbernic RG351V, Powkiddy
RK2023, Powkiddy X55) along with the Sonoff iHost Smart Home Hub
and a few Rockchips SBCs
- Some ComXpress boards based on Marvell CN913x, which is the
follow-up to Armada 7xxx/8xxx.
- Six new industrial/embedded boards based on NXP i.MX8 and i.MX9
- Mediatek MT8183 based Chromebooks from Lenovo, Asus and Acer.
- Toradex Verdin AM62 Mallow carrier for TI AM62
- Huashan Pi board based on the SophGo CV1812H RISC-V chip
- Two boards based on Allwinner H616/H618
- A number of reference boards for various added SoCs from Qualcomm,
Mediatek, Google, Samsung, NXP and Spreadtrum
As usual, there are cleanups and warning fixes across all platforms as
well as added features for several of them"
* tag 'soc-dt-6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (857 commits)
ARM: dts: usr8200: Fix phy registers
arm64: dts: intel: minor whitespace cleanup around '='
arm64: dts: socfpga: agilex: drop redundant status
arm64: dts: socfpga: agilex: add unit address to soc node
arm64: dts: socfpga: agilex: move firmware out of soc node
arm64: dts: socfpga: agilex: move FPGA region out of soc node
arm64: dts: socfpga: agilex: align pin-controller name with bindings
arm64: dts: socfpga: stratix10_swvp: drop unsupported DW MSHC properties
arm64: dts: socfpga: stratix10_socdk: align NAND chip name with bindings
arm64: dts: socfpga: stratix10: add unit address to soc node
arm64: dts: socfpga: stratix10: move firmware out of soc node
arm64: dts: socfpga: stratix10: move FPGA region out of soc node
arm64: dts: socfpga: stratix10: align pincfg nodes with bindings
arm64: dts: socfpga: stratix10: add clock-names to DWC2 USB
arm64: dts: socfpga: drop unsupported cdns,page-size and cdns,block-size
ARM: dts: socfpga: align NAND controller name with bindings
ARM: dts: socfpga: drop unsupported cdns,page-size and cdns,block-size
arm64: dts: rockchip: Fix led pinctrl of lubancat 1
arm64: dts: rockchip: correct gpio_pwrctrl1 typo on nanopc-t6
arm64: dts: rockchip: correct gpio_pwrctrl1 typo on rock-5b
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from Paolo Abeni:
"The most interesting thing is probably the networking structs
reorganization and a significant amount of changes is around
self-tests.
Core & protocols:
- Analyze and reorganize core networking structs (socks, netdev,
netns, mibs) to optimize cacheline consumption and set up build
time warnings to safeguard against future header changes
This improves TCP performances with many concurrent connections up
to 40%
- Add page-pool netlink-based introspection, exposing the memory
usage and recycling stats. This helps indentify bad PP users and
possible leaks
- Refine TCP/DCCP source port selection to no longer favor even
source port at connect() time when IP_LOCAL_PORT_RANGE is set. This
lowers the time taken by connect() for hosts having many active
connections to the same destination
- Refactor the TCP bind conflict code, shrinking related socket
structs
- Refactor TCP SYN-Cookie handling, as a preparation step to allow
arbitrary SYN-Cookie processing via eBPF
- Tune optmem_max for 0-copy usage, increasing the default value to
128KB and namespecifying it
- Allow coalescing for cloned skbs coming from page pools, improving
RX performances with some common configurations
- Reduce extension header parsing overhead at GRO time
- Add bridge MDB bulk deletion support, allowing user-space to
request the deletion of matching entries
- Reorder nftables struct members, to keep data accessed by the
datapath first
- Introduce TC block ports tracking and use. This allows supporting
multicast-like behavior at the TC layer
- Remove UAPI support for retired TC qdiscs (dsmark, CBQ and ATM) and
classifiers (RSVP and tcindex)
- More data-race annotations
- Extend the diag interface to dump TCP bound-only sockets
- Conditional notification of events for TC qdisc class and actions
- Support for WPAN dynamic associations with nearby devices, to form
a sub-network using a specific PAN ID
- Implement SMCv2.1 virtual ISM device support
- Add support for Batman-avd mulicast packet type
BPF:
- Tons of verifier improvements:
- BPF register bounds logic and range support along with a large
test suite
- log improvements
- complete precision tracking support for register spills
- track aligned STACK_ZERO cases as imprecise spilled registers.
This improves the verifier "instructions processed" metric from
single digit to 50-60% for some programs
- support for user's global BPF subprogram arguments with few
commonly requested annotations for a better developer
experience
- support tracking of BPF_JNE which helps cases when the compiler
transforms (unsigned) "a > 0" into "if a == 0 goto xxx" and the
like
- several fixes
- Add initial TX metadata implementation for AF_XDP with support in
mlx5 and stmmac drivers. Two types of offloads are supported right
now, that is, TX timestamp and TX checksum offload
- Fix kCFI bugs in BPF all forms of indirect calls from BPF into
kernel and from kernel into BPF work with CFI enabled. This allows
BPF to work with CONFIG_FINEIBT=y
- Change BPF verifier logic to validate global subprograms lazily
instead of unconditionally before the main program, so they can be
guarded using BPF CO-RE techniques
- Support uid/gid options when mounting bpffs
- Add a new kfunc which acquires the associated cgroup of a task
within a specific cgroup v1 hierarchy where the latter is
identified by its id
- Extend verifier to allow bpf_refcount_acquire() of a map value
field obtained via direct load which is a use-case needed in
sched_ext
- Add BPF link_info support for uprobe multi link along with bpftool
integration for the latter
- Support for VLAN tag in XDP hints
- Remove deprecated bpfilter kernel leftovers given the project is
developed in user-space (https://github.com/facebook/bpfilter)
Misc:
- Support for parellel TC self-tests execution
- Increase MPTCP self-tests coverage
- Updated the bridge documentation, including several so-far
undocumented features
- Convert all the net self-tests to run in unique netns, to avoid
random failures due to conflict and allow concurrent runs
- Add TCP-AO self-tests
- Add kunit tests for both cfg80211 and mac80211
- Autogenerate Netlink families documentation from YAML spec
- Add yml-gen support for fixed headers and recursive nests, the tool
can now generate user-space code for all genetlink families for
which we have specs
- A bunch of additional module descriptions fixes
- Catch incorrect freeing of pages belonging to a page pool
Driver API:
- Rust abstractions for network PHY drivers; do not cover yet the
full C API, but already allow implementing functional PHY drivers
in rust
- Introduce queue and NAPI support in the netdev Netlink interface,
allowing complete access to the device <> NAPIs <> queues
relationship
- Introduce notifications filtering for devlink to allow control
application scale to thousands of instances
- Improve PHY validation, requesting rate matching information for
each ethtool link mode supported by both the PHY and host
- Add support for ethtool symmetric-xor RSS hash
- ACPI based Wifi band RFI (WBRF) mitigation feature for the AMD
platform
- Expose pin fractional frequency offset value over new DPLL generic
netlink attribute
- Convert older drivers to platform remove callback returning void
- Add support for PHY package MMD read/write
New hardware / drivers:
- Ethernet:
- Octeon CN10K devices
- Broadcom 5760X P7
- Qualcomm SM8550 SoC
- Texas Instrument DP83TG720S PHY
- Bluetooth:
- IMC Networks Bluetooth radio
Removed:
- WiFi:
- libertas 16-bit PCMCIA support
- Atmel at76c50x drivers
- HostAP ISA/PCMCIA style 802.11b driver
- zd1201 802.11b USB dongles
- Orinoco ISA/PCMCIA 802.11b driver
- Aviator/Raytheon driver
- Planet WL3501 driver
- RNDIS USB 802.11b driver
Driver updates:
- Ethernet high-speed NICs:
- Intel (100G, ice, idpf):
- allow one by one port representors creation and removal
- add temperature and clock information reporting
- add get/set for ethtool's header split ringparam
- add again FW logging
- adds support switchdev hardware packet mirroring
- iavf: implement symmetric-xor RSS hash
- igc: add support for concurrent physical and free-running
timers
- i40e: increase the allowable descriptors
- nVidia/Mellanox:
- Preparation for Socket-Direct multi-dev netdev. That will
allow in future releases combining multiple PFs devices
attached to different NUMA nodes under the same netdev
- Broadcom (bnxt):
- TX completion handling improvements
- add basic ntuple filter support
- reduce MSIX vectors usage for MQPRIO offload
- add VXLAN support, USO offload and TX coalesce completion
for P7
- Marvell Octeon EP:
- xmit-more support
- add PF-VF mailbox support and use it for FW notifications
for VFs
- Wangxun (ngbe/txgbe):
- implement ethtool functions to operate pause param, ring
param, coalesce channel number and msglevel
- Netronome/Corigine (nfp):
- add flow-steering support
- support UDP segmentation offload
- Ethernet NICs embedded, slower, virtual:
- Xilinx AXI: remove duplicate DMA code adopting the dma engine
driver
- stmmac: add support for HW-accelerated VLAN stripping
- TI AM654x sw: add mqprio, frame preemption & coalescing
- gve: add support for non-4k page sizes.
- virtio-net: support dynamic coalescing moderation
- nVidia/Mellanox Ethernet datacenter switches:
- allow firmware upgrade without a reboot
- more flexible support for bridge flooding via the compressed
FID flooding mode
- Ethernet embedded switches:
- Microchip:
- fine-tune flow control and speed configurations in KSZ8xxx
- KSZ88X3: enable setting rmii reference
- Renesas:
- add jumbo frames support
- Marvell:
- 88E6xxx: add "eth-mac" and "rmon" stats support
- Ethernet PHYs:
- aquantia: add firmware load support
- at803x: refactor the driver to simplify adding support for more
chip variants
- NXP C45 TJA11xx: Add MACsec offload support
- Wifi:
- MediaTek (mt76):
- NVMEM EEPROM improvements
- mt7996 Extremely High Throughput (EHT) improvements
- mt7996 Wireless Ethernet Dispatcher (WED) support
- mt7996 36-bit DMA support
- Qualcomm (ath12k):
- support for a single MSI vector
- WCN7850: support AP mode
- Intel (iwlwifi):
- new debugfs file fw_dbg_clear
- allow concurrent P2P operation on DFS channels
- Bluetooth:
- QCA2066: support HFP offload
- ISO: more broadcast-related improvements
- NXP: better recovery in case receiver/transmitter get out of sync"
* tag 'net-next-6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1714 commits)
lan78xx: remove redundant statement in lan78xx_get_eee
lan743x: remove redundant statement in lan743x_ethtool_get_eee
bnxt_en: Fix RCU locking for ntuple filters in bnxt_rx_flow_steer()
bnxt_en: Fix RCU locking for ntuple filters in bnxt_srxclsrldel()
bnxt_en: Remove unneeded variable in bnxt_hwrm_clear_vnic_filter()
tcp: Revert no longer abort SYN_SENT when receiving some ICMP
Revert "mlx5 updates 2023-12-20"
Revert "net: stmmac: Enable Per DMA Channel interrupt"
ipvlan: Remove usage of the deprecated ida_simple_xx() API
ipvlan: Fix a typo in a comment
net/sched: Remove ipt action tests
net: stmmac: Use interrupt mode INTM=1 for per channel irq
net: stmmac: Add support for TX/RX channel interrupt
net: stmmac: Make MSI interrupt routine generic
dt-bindings: net: snps,dwmac: per channel irq
net: phy: at803x: make read_status more generic
net: phy: at803x: add support for cdt cross short test for qca808x
net: phy: at803x: refactor qca808x cable test get status function
net: phy: at803x: generalize cdt fault length function
net: ethernet: cortina: Drop TSO support
...
|
|
After the following three changes at the beginning of the year:
commit 6d4cc40fb5f5 ("LoongArch: Add kprobes support")
commit 3f5536860086 ("LoongArch: Add kretprobes support")
commit 09e679c28a4d ("LoongArch: Add kprobes on ftrace support")
it is appropriate to add loongarch as supported architecture in
kprobes documentation.
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Acked-by: "Masami Hiramatsu (Google)" <mhiramat@kernel.org>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Link: https://lore.kernel.org/r/20231219062330.22813-3-yangtiezhu@loongson.cn
|
|
According to the latest authorship and Signed-off-by:
Masami Hiramatsu (Google) <mhiramat@kernel.org>
Masami Hiramatsu is working at Google, so the current email @redhat.com
is out of date, it is better to use the email @kernel.org.
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Acked-by: "Masami Hiramatsu (Google)" <mhiramat@kernel.org>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Link: https://lore.kernel.org/r/20231219062330.22813-2-yangtiezhu@loongson.cn
|
