Age | Commit message (Collapse) | Author | Files | Lines |
|
git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine
Pull dmaengine updates from Vinod Koul:
"New controller support and updates to drivers.
New support:
- Qualcomm SM6115 and QCM2290 dmaengine support
- at_xdma support for microchip,sam9x7 controller
Updates:
- idxd updates for wq simplification and ats knob updates
- fsl edma updates for v3 support
- Xilinx AXI4-Stream control support
- Yaml conversion for bcm dma binding"
* tag 'dmaengine-6.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine: (53 commits)
dmaengine: fsl-edma: integrate v3 support
dt-bindings: fsl-dma: fsl-edma: add edma3 compatible string
dmaengine: fsl-edma: move tcd into struct fsl_dma_chan
dmaengine: fsl-edma: refactor chan_name setup and safety
dmaengine: fsl-edma: move clearing of register interrupt into setup_irq function
dmaengine: fsl-edma: refactor using devm_clk_get_enabled
dmaengine: fsl-edma: simply ATTR_DSIZE and ATTR_SSIZE by using ffs()
dmaengine: fsl-edma: move common IRQ handler to common.c
dmaengine: fsl-edma: Remove enum edma_version
dmaengine: fsl-edma: transition from bool fields to bitmask flags in drvdata
dmaengine: fsl-edma: clean up EXPORT_SYMBOL_GPL in fsl-edma-common.c
dmaengine: fsl-edma: fix build error when arch is s390
dmaengine: idxd: Fix issues with PRS disable sysfs knob
dmaengine: idxd: Allow ATS disable update only for configurable devices
dmaengine: xilinx_dma: Program interrupt delay timeout
dmaengine: xilinx_dma: Use tasklet_hi_schedule for timing critical usecase
dmaengine: xilinx_dma: Freeup active list based on descriptor completion bit
dmaengine: xilinx_dma: Increase AXI DMA transaction segment count
dmaengine: xilinx_dma: Pass AXI4-Stream control words to dma client
dt-bindings: dmaengine: xilinx_dma: Add xlnx,irq-delay property
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy
Pull phy updates from Vinod Koul:
"As usual a couple of new drivers, a bunch of new device support and
few updates to existing drivers
New Support:
- Starfive dphy rx, JH7110 usb and pcie support
- Rockchip rv1126 inno-dsi phy, rk3588 usb and pcie support
- Qualcomm sa8775p PCIe support, M31 USB PHY driver
- Samsung Exynos850 usb support
Updates:
- Mediatek dsi driver clock updates
- Qualcomm sm8150 combo phy with reworking of qmp pcie driver
- Xilinx zynqmp runtime PM support"
* tag 'phy-for-6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy: (83 commits)
phy: exynos5-usbdrd: Add Exynos850 support
phy: exynos5-usbdrd: Add 26MHz ref clk support
phy: exynos5-usbdrd: Make it possible to pass custom phy ops
dt-bindings: phy: samsung,usb3-drd-phy: Add Exynos850 support
phy: qcom-qmp-combo: fix clock probing
phy: qcom-qmp-pcie: support SM8150 PCIe QMP PHYs
phy: qcom-qmp-pcie: populate offsets configuration
phy: qcom-qmp-pcie: simplify clock handling
phy: qcom-qmp-pcie: keep offset tables sorted
phy: qcom-qmp-pcie: drop ln_shrd from v5_20 config
dt-bindings: phy: qcom,qmp-pcie: describe SM8150 PCIe PHYs
dt-bindings: phy: migrate QMP PCIe PHY bindings to qcom,sc8280xp-qmp-pcie-phy.yaml
phy: fsl-imx8mq-usb: add dev_err_probe if getting vbus failed
phy: qcom: Introduce M31 USB PHY driver
dt-bindings: phy: qcom,m31: Document qcom,m31 USB phy
phy: rockchip: inno-dsidphy: Add rv1126 support
dt-bindings: phy: rockchip-inno-dsidphy: Document rv1126
dt-bindings: phy: mediatek,tphy: allow simple nodename pattern
phy: amlogic: meson-g12a-usb2: fix Wvoid-pointer-to-enum-cast warning
phy: marvell pxa-usb: fix Wvoid-pointer-to-enum-cast warning
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux
Pull MTD updates from Miquel Raynal:
"Core MTD changes:
- Use refcount to prevent corruption
- Call external _get and _put in right order
- Fix use-after-free in mtd release
- Explicitly include correct DT includes
- Clean refcounting with MTD_PARTITIONED_MASTER
- mtdblock: make warning messages ratelimited
- dt-bindings: Add SEAMA partition bindings
Device driver changes:
- Use devm helper functions
- Fix questionable cast, remove pointless ones.
- error handling fixes
- add support for new chip versions
- update DT bindings
- misc cleanups - fix typos, whitespace, indentation"
* tag 'mtd/for-6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux: (105 commits)
dt-bindings: mtd: amlogic,meson-nand: drop unneeded quotes
mtd: spear_smi: Use helper function devm_clk_get_enabled()
mtd: rawnand: orion: Use helper function devm_clk_get_optional_enabled()
mtd: rawnand: vf610_nfc: Use helper function devm_clk_get_enabled()
mtd: rawnand: sunxi: Use helper function devm_clk_get_enabled()
mtd: rawnand: stm32_fmc2: Use helper function devm_clk_get_enabled()
mtd: rawnand: mtk: Use helper function devm_clk_get_enabled()
mtd: rawnand: mpc5121: Use helper function devm_clk_get_enabled()
mtd: rawnand: lpc32xx_slc: Use helper function devm_clk_get_enabled()
mtd: rawnand: intel: Use helper function devm_clk_get_enabled()
mtd: rawnand: fsmc: Use helper function devm_clk_get_enabled()
mtd: rawnand: arasan: Use helper function devm_clk_get_enabled()
mtd: rawnand: qcom: Add read/read_start ops in exec_op path
mtd: rawnand: qcom: Clear buf_count and buf_start in raw read
mtd: maps: fix -Wvoid-pointer-to-enum-cast warning
mtd: rawnand: fix -Wvoid-pointer-to-enum-cast warning
mtd: rawnand: fsmc: handle clk prepare error in fsmc_nand_resume()
mtd: rawnand: Propagate error and simplify ternary operators for brcmstb_nand_wait_for_completion()
mtd: rawnand: qcom: Sort includes alphabetically
mtd: rawnand: qcom: Do not override the error no of submit_descs()
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs
Pull f2fs updates from Jaegeuk Kim:
"In this cycle, we don't have a highlighted feature enhancement, but
mostly have fixed issues mainly in two parts: 1) zoned block device,
and 2) compression support.
For zoned block device, we've tried to improve the power-off recovery
flow as much as possible. For compression, we found some corner cases
caused by wrong compression policy and logics. Other than them, there
were some reverts and stat corrections.
Bug fixes:
- use finish zone command when closing a zone
- check zone type before sending async reset zone command
- fix to assign compress_level for lz4 correctly
- fix error path of f2fs_submit_page_read()
- don't {,de}compress non-full cluster
- send small discard commands during checkpoint back
- flush inode if atomic file is aborted
- correct to account gc/cp stats
And, there are minor bug fixes, avoiding false lockdep warning, and
clean-ups"
* tag 'f2fs-for-6-6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs: (25 commits)
f2fs: use finish zone command when closing a zone
f2fs: compress: fix to assign compress_level for lz4 correctly
f2fs: fix error path of f2fs_submit_page_read()
f2fs: clean up error handling in sanity_check_{compress_,}inode()
f2fs: avoid false alarm of circular locking
Revert "f2fs: do not issue small discard commands during checkpoint"
f2fs: doc: fix description of max_small_discards
f2fs: should update REQ_TIME for direct write
f2fs: fix to account cp stats correctly
f2fs: fix to account gc stats correctly
f2fs: remove unneeded check condition in __f2fs_setxattr()
f2fs: fix to update i_ctime in __f2fs_setxattr()
Revert "f2fs: fix to do sanity check on extent cache correctly"
f2fs: increase usage of folio_next_index() helper
f2fs: Only lfs mode is allowed with zoned block device feature
f2fs: check zone type before sending async reset zone command
f2fs: compress: don't {,de}compress non-full cluster
f2fs: allow f2fs_ioc_{,de}compress_file to be interrupted
f2fs: don't reopen the main block device in f2fs_scan_devices
f2fs: fix to avoid mmap vs set_compress_option case
...
|
|
Pull SCSI updates from James Bottomley:
"Updates to the usual drivers (ufs, lpfc, qla2xxx, mpi3mr, libsas) and
the usual minor updates and bug fixes but no significant core changes"
* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (116 commits)
scsi: storvsc: Handle additional SRB status values
scsi: libsas: Delete sas_ata_task.retry_count
scsi: libsas: Delete sas_ata_task.stp_affil_pol
scsi: libsas: Delete sas_ata_task.set_affil_pol
scsi: libsas: Delete sas_ssp_task.task_prio
scsi: libsas: Delete sas_ssp_task.enable_first_burst
scsi: libsas: Delete sas_ssp_task.retry_count
scsi: libsas: Delete struct scsi_core
scsi: libsas: Delete enum sas_phy_type
scsi: libsas: Delete enum sas_class
scsi: libsas: Delete sas_ha_struct.lldd_module
scsi: target: Fix write perf due to unneeded throttling
scsi: lpfc: Do not abuse UUID APIs and LPFC_COMPRESS_VMID_SIZE
scsi: pm8001: Remove unused declarations
scsi: fcoe: Fix potential deadlock on &fip->ctlr_lock
scsi: elx: sli4: Remove code duplication
scsi: bfa: Replace one-element array with flexible-array member in struct fc_rscn_pl_s
scsi: qla2xxx: Remove unused declarations
scsi: pmcraid: Use pci_dev_id() to simplify the code
scsi: pm80xx: Set RETFIS when requested by libsas
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull probes updates from Masami Hiramatsu:
- kprobes: use struct_size() for variable size kretprobe_instance data
structure.
- eprobe: Simplify trace_eprobe list iteration.
- probe events: Data structure field access support on BTF argument.
- Update BTF argument support on the functions in the kernel
loadable modules (only loaded modules are supported).
- Move generic BTF access function (search function prototype and
get function parameters) to a separated file.
- Add a function to search a member of data structure in BTF.
- Support accessing BTF data structure member from probe args by
C-like arrow('->') and dot('.') operators. e.g.
't sched_switch next=next->pid vruntime=next->se.vruntime'
- Support accessing BTF data structure member from $retval. e.g.
'f getname_flags%return +0($retval->name):string'
- Add string type checking if BTF type info is available. This will
reject if user specify ":string" type for non "char pointer"
type.
- Automatically assume the fprobe event as a function return event
if $retval is used.
- selftests/ftrace: Add BTF data field access test cases.
- Documentation: Update fprobe event example with BTF data field.
* tag 'probes-v6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
Documentation: tracing: Update fprobe event example with BTF field
selftests/ftrace: Add BTF fields access testcases
tracing/fprobe-event: Assume fprobe is a return event by $retval
tracing/probes: Add string type check with BTF
tracing/probes: Support BTF field access from $retval
tracing/probes: Support BTF based data structure field access
tracing/probes: Add a function to search a member of a struct/union
tracing/probes: Move finding func-proto API and getting func-param API to trace_btf
tracing/probes: Support BTF argument on module functions
tracing/eprobe: Iterate trace_eprobe directly
kernel: kprobes: Use struct_size()
|
|
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu
Pull iommu updates from Joerg Roedel:
"Core changes:
- Consolidate probe_device path
- Make the PCI-SAC IOVA allocation trick PCI-only
AMD IOMMU:
- Consolidate PPR log handling
- Interrupt handling improvements
- Refcount fixes for amd_iommu_v2 driver
Intel VT-d driver:
- Enable idxd device DMA with pasid through iommu dma ops
- Lift RESV_DIRECT check from VT-d driver to core
- Miscellaneous cleanups and fixes
ARM-SMMU drivers:
- Device-tree binding updates:
- Add additional compatible strings for Qualcomm SoCs
- Allow ASIDs to be configured in the DT to work around Qualcomm's
broken hypervisor
- Fix clocks for Qualcomm's MSM8998 SoC
- SMMUv2:
- Support for Qualcomm's legacy firmware implementation featured
on at least MSM8956 and MSM8976
- Match compatible strings for Qualcomm SM6350 and SM6375 SoC
variants
- SMMUv3:
- Use 'ida' instead of a bitmap for VMID allocation
- Rockchip IOMMU:
- Lift page-table allocation restrictions on newer hardware
- Mediatek IOMMU:
- Add MT8188 IOMMU Support
- Renesas IOMMU:
- Allow PCIe devices
.. and the usual set of cleanups an smaller fixes"
* tag 'iommu-updates-v6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: (64 commits)
iommu: Explicitly include correct DT includes
iommu/amd: Remove unused declarations
iommu/arm-smmu-qcom: Add SM6375 SMMUv2
iommu/arm-smmu-qcom: Add SM6350 DPU compatible
iommu/arm-smmu-qcom: Add SM6375 DPU compatible
iommu/arm-smmu-qcom: Sort the compatible list alphabetically
dt-bindings: arm-smmu: Fix MSM8998 clocks description
iommu/vt-d: Remove unused extern declaration dmar_parse_dev_scope()
iommu/vt-d: Fix to convert mm pfn to dma pfn
iommu/vt-d: Fix to flush cache of PASID directory table
iommu/vt-d: Remove rmrr check in domain attaching device path
iommu: Prevent RESV_DIRECT devices from blocking domains
dmaengine/idxd: Re-enable kernel workqueue under DMA API
iommu/vt-d: Add set_dev_pasid callback for dma domain
iommu/vt-d: Prepare for set_dev_pasid callback
iommu/vt-d: Make prq draining code generic
iommu/vt-d: Remove pasid_mutex
iommu/vt-d: Add domain_flush_pasid_iotlb()
iommu: Move global PASID allocation from SVA to core
iommu: Generalize PASID 0 for normal DMA w/o PASID
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull tracing updates from Steven Rostedt:
"User visible changes:
- Added a way to easier filter with cpumasks:
# echo 'cpumask & CPUS{17-42}' > /sys/kernel/tracing/events/ipi_send_cpumask/filter
- Show actual size of ring buffer after modifying the ring buffer
size via buffer_size_kb.
Currently it just returns what was written, but the actual size
rounds up to the sub buffer size. Show that real size instead.
Major changes:
- Added "eventfs". This is the code that handles the inodes and
dentries of tracefs/events directory. As there are thousands of
events, and each event has several inodes and dentries that
currently exist even when tracing is never used, they take up
precious memory. Instead, eventfs will allocate the inodes and
dentries in a JIT way (similar to what procfs does). There is now
metadata that handles the events and subdirectories, and will
create the inodes and dentries when they are used.
Note, I also have patches that remove the subdirectory meta data,
but will wait till the next merge window before applying them. It's
a little more complex, and I want to make sure the dynamic code
works properly before adding more complexity, making it easier to
revert if need be.
Minor changes:
- Optimization to user event list traversal
- Remove intermediate permission of tracefs files (note the
intermediate permission removes all access to the files so it is
not a security concern, but just a clean up)
- Add the complex fix to FORTIFY_SOURCE to the kernel stack event
logic
- Other minor cleanups"
* tag 'trace-v6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace: (29 commits)
tracefs: Remove kerneldoc from struct eventfs_file
tracefs: Avoid changing i_mode to a temp value
tracing/user_events: Optimize safe list traversals
ftrace: Remove empty declaration ftrace_enable_daemon() and ftrace_disable_daemon()
tracing: Remove unused function declarations
tracing/filters: Document cpumask filtering
tracing/filters: Further optimise scalar vs cpumask comparison
tracing/filters: Optimise CPU vs cpumask filtering when the user mask is a single CPU
tracing/filters: Optimise scalar vs cpumask filtering when the user mask is a single CPU
tracing/filters: Optimise cpumask vs cpumask filtering when user mask is a single CPU
tracing/filters: Enable filtering the CPU common field by a cpumask
tracing/filters: Enable filtering a scalar field by a cpumask
tracing/filters: Enable filtering a cpumask field by another cpumask
tracing/filters: Dynamically allocate filter_pred.regex
test: ftrace: Fix kprobe test for eventfs
eventfs: Move tracing/events to eventfs
eventfs: Implement removal of meta data from eventfs
eventfs: Implement functions to create files and dirs when accessed
eventfs: Implement eventfs lookup, read, open functions
eventfs: Implement eventfs file add functions
...
|
|
Pull workqueue updates from Tejun Heo:
- Unbound workqueues now support more flexible affinity scopes.
The default behavior is to soft-affine according to last level cache
boundaries. A work item queued from a given LLC is executed by a
worker running on the same LLC but the worker may be moved across
cache boundaries as the scheduler sees fit. On machines which
multiple L3 caches, which are becoming more popular along with
chiplet designs, this improves cache locality while not harming work
conservation too much.
Unbound workqueues are now also a lot more flexible in terms of
execution affinity. Differeing levels of affinity scopes are
supported and both the default and per-workqueue affinity settings
can be modified dynamically. This should help working around amny of
sub-optimal behaviors observed recently with asymmetric ARM CPUs.
This involved signficant restructuring of workqueue code. Nothing was
reported yet but there's some risk of subtle regressions. Should keep
an eye out.
- Rescuer workers now has more identifiable comms.
- workqueue.unbound_cpus added so that CPUs which can be used by
workqueue can be constrained early during boot.
- Now that all the in-tree users have been flushed out, trigger warning
if system-wide workqueues are flushed.
* tag 'wq-for-6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq: (31 commits)
workqueue: fix data race with the pwq->stats[] increment
workqueue: Rename rescuer kworker
workqueue: Make default affinity_scope dynamically updatable
workqueue: Add "Affinity Scopes and Performance" section to documentation
workqueue: Implement non-strict affinity scope for unbound workqueues
workqueue: Add workqueue_attrs->__pod_cpumask
workqueue: Factor out need_more_worker() check and worker wake-up
workqueue: Factor out work to worker assignment and collision handling
workqueue: Add multiple affinity scopes and interface to select them
workqueue: Modularize wq_pod_type initialization
workqueue: Add tools/workqueue/wq_dump.py which prints out workqueue configuration
workqueue: Generalize unbound CPU pods
workqueue: Factor out clearing of workqueue-only attrs fields
workqueue: Factor out actual cpumask calculation to reduce subtlety in wq_update_pod()
workqueue: Initialize unbound CPU pods later in the boot
workqueue: Move wq_pod_init() below workqueue_init()
workqueue: Rename NUMA related names to use pod instead
workqueue: Rename workqueue_attrs->no_numa to ->ordered
workqueue: Make unbound workqueues to use per-cpu pool_workqueues
workqueue: Call wq_update_unbound_numa() on all CPUs in NUMA node on CPU hotplug
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup
Pull cgroup updates from Tejun Heo:
- Per-cpu cpu usage stats are now tracked
This currently isn't printed out in the cgroupfs interface and can
only be accessed through e.g. BPF. Should decide on a not-too-ugly
way to show per-cpu stats in cgroupfs
- cpuset received some cleanups and prepatory patches for the pending
cpus.exclusive patchset which will allow cpuset partitions to be
created below non-partition parents, which should ease the management
of partition cpusets
- A lot of code and documentation cleanup patches
- tools/testing/selftests/cgroup/test_cpuset.c added
* tag 'cgroup-for-6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup: (32 commits)
cgroup: Avoid -Wstringop-overflow warnings
cgroup:namespace: Remove unused cgroup_namespaces_init()
cgroup/rstat: Record the cumulative per-cpu time of cgroup and its descendants
cgroup: clean up if condition in cgroup_pidlist_start()
cgroup: fix obsolete function name in cgroup_destroy_locked()
Documentation: cgroup-v2.rst: Correct number of stats entries
cgroup: fix obsolete function name above css_free_rwork_fn()
cgroup/cpuset: fix kernel-doc
cgroup: clean up printk()
cgroup: fix obsolete comment above cgroup_create()
docs: cgroup-v1: fix typo
docs: cgroup-v1: correct the term of Page Cache organization in inode
cgroup/misc: Store atomic64_t reads to u64
cgroup/misc: Change counters to be explicit 64bit types
cgroup/misc: update struct members descriptions
cgroup: remove cgrp->kn check in css_populate_dir()
cgroup: fix obsolete function name
cgroup: use cached local variable parent in for loop
cgroup: remove obsolete comment above struct cgroupstats
cgroup: put cgroup_tryget_css() inside CONFIG_CGROUP_SCHED
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid
Pull HID updates from Benjamin Tissoires:
- devm fixes for problems that caused use-after-free reports (Rahul
Rameshbabu)
- Some extensive HID docs (Marco Morandini)
- Constification of struct class (Ivan Orlov and Greg Kroah-Hartman)
- Google Stadia Force Feedback support (Fabio Baltieri)
- Various fixes and new device ID support
* tag 'for-linus-2023083101' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid: (42 commits)
HID: logitech-hidpp: rework one more time the retries attempts
HID: nvidia-shield: Reference hid_device devm allocation of input_dev name
HID: multitouch: Correct devm device reference for hidinput input_dev name
HID: uclogic: Correct devm device reference for hidinput input_dev name
HID: logitech-dj: Fix error handling in logi_dj_recv_switch_to_dj_mode()
HID: i2c-hid: elan: Add ili9882t timing
dt-bindings: input: i2c-hid: Introduce Ilitek ili9882t
HID: apple: Add "Hailuck" to the list of non-apple keyboards
HID: steelseries: arctis_1_battery_request[] should be static
MAINTAINERS: update my email address
HID: logitech-hidpp: Add support for Logitech MX Anywhere 3 mouse
HID: wacom: struct name cleanup
HID: wacom: remove unnecessary 'connected' variable from EKR
HID: wacom: remove the battery when the EKR is off
HID: nvidia-shield: Update Thunderstrike LED instance name to use id
HID: nvidia-shield: Add battery support for Thunderstrike
HID: nvidia-shield: Remove led_classdev_unregister in thunderstrike_create
HID: hid-google-stadiaff: add support for Stadia force feedback
HID: logitech-dj: Add support for a new lightspeed receiver iteration
HID: logitech-hidpp: Add support for the Pro X Superlight
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media
Pull media updates from Mauro Carvalho Chehab:
- new i2c drivers: ds90ub913, ds90ub953, ds90ub960, dw9719, ds90ub913
- new Intel IVSC MEI drivers
- some Mediatek platform drivers were moved to a common location
- Intel atomisp2 driver is now working with the main ov2680 driver. Due
to that, the atomisp2 ov2680 staging one was removed
- the bttv driver was finally converted to videobuf2 framework. This
was the last one upstream using videobuf version 1 core. We'll likely
remove the old videobuf framework on 6.7
- lots of improvements at atomisp driver: it now works with normal I2C
sensors. Several compile-mode dependecies to select between ISP2400
and ISP2401 are now solved in runtime
- a new ipu-bridge logic was added to work with IVSC MEI drivers
- venus driver gained better support for new VPU versions
- the v4l core async framework has gained lots of improvements and
cleanups
- lots of other cleanups, improvements and driver fixes
* tag 'media/v6.6-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (358 commits)
media: ivsc: Add ACPI dependency
media: bttv: convert to vb2
media: bttv: use audio defaults for winfast2000
media: bttv: refactor bttv_set_dma()
media: bttv: move vbi_skip/vbi_count out of buffer
media: bttv: remove crop info from bttv_buffer
media: bttv: remove tvnorm field from bttv_buffer
media: bttv: remove format field from bttv_buffer
media: bttv: move do_crop flag out of bttv_fh
media: bttv: copy vbi_fmt from bttv_fh
media: bttv: copy vid fmt/width/height from fh
media: bttv: radio use v4l2_fh instead of bttv_fh
media: bttv: replace BUG with WARN_ON
media: bttv: use video_drvdata to get bttv
media: i2c: rdacm21: Fix uninitialized value
media: coda: Remove duplicated include
media: vivid: fix the racy dev->radio_tx_rds_owner
media: i2c: ccs: Check rules is non-NULL
media: i2c: ds90ub960: Fix PLL config for 1200 MHz CSI rate
media: i2c: ds90ub953: Fix use of uninitialized variables
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc driver updates from Greg KH:
"Here is the big set of char/misc and other small driver subsystem
changes for 6.6-rc1.
Stuff all over the place here, lots of driver updates and changes and
new additions. Short summary is:
- new IIO drivers and updates
- Interconnect driver updates
- fpga driver updates and additions
- fsi driver updates
- mei driver updates
- coresight driver updates
- nvmem driver updates
- counter driver updates
- lots of smaller misc and char driver updates and additions
All of these have been in linux-next for a long time with no reported
problems"
* tag 'char-misc-6.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (267 commits)
nvmem: core: Notify when a new layout is registered
nvmem: core: Do not open-code existing functions
nvmem: core: Return NULL when no nvmem layout is found
nvmem: core: Create all cells before adding the nvmem device
nvmem: u-boot-env:: Replace zero-length array with DECLARE_FLEX_ARRAY() helper
nvmem: sec-qfprom: Add Qualcomm secure QFPROM support
dt-bindings: nvmem: sec-qfprom: Add bindings for secure qfprom
dt-bindings: nvmem: Add compatible for QCM2290
nvmem: Kconfig: Fix typo "drive" -> "driver"
nvmem: Explicitly include correct DT includes
nvmem: add new NXP QorIQ eFuse driver
dt-bindings: nvmem: Add t1023-sfp efuse support
dt-bindings: nvmem: qfprom: Add compatible for MSM8226
nvmem: uniphier: Use devm_platform_get_and_ioremap_resource()
nvmem: qfprom: do some cleanup
nvmem: stm32-romem: Use devm_platform_get_and_ioremap_resource()
nvmem: rockchip-efuse: Use devm_platform_get_and_ioremap_resource()
nvmem: meson-mx-efuse: Convert to devm_platform_ioremap_resource()
nvmem: lpc18xx_otp: Convert to devm_platform_ioremap_resource()
nvmem: brcm_nvram: Use devm_platform_get_and_ioremap_resource()
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core updates from Greg KH:
"Here is a small set of driver core updates and additions for 6.6-rc1.
Included in here are:
- stable kernel documentation updates
- class structure const work from Ivan on various subsystems
- kernfs tweaks
- driver core tests!
- kobject sanity cleanups
- kobject structure reordering to save space
- driver core error code handling fixups
- other minor driver core cleanups
All of these have been in linux-next for a while with no reported
problems"
* tag 'driver-core-6.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (32 commits)
driver core: Call in reversed order in device_platform_notify_remove()
driver core: Return proper error code when dev_set_name() fails
kobject: Remove redundant checks for whether ktype is NULL
kobject: Add sanity check for kset->kobj.ktype in kset_register()
drivers: base: test: Add missing MODULE_* macros to root device tests
drivers: base: test: Add missing MODULE_* macros for platform devices tests
drivers: base: Free devm resources when unregistering a device
drivers: base: Add basic devm tests for platform devices
drivers: base: Add basic devm tests for root devices
kernfs: fix missing kernfs_iattr_rwsem locking
docs: stable-kernel-rules: mention that regressions must be prevented
docs: stable-kernel-rules: fine-tune various details
docs: stable-kernel-rules: make the examples for option 1 a proper list
docs: stable-kernel-rules: move text around to improve flow
docs: stable-kernel-rules: improve structure by changing headlines
base/node: Remove duplicated include
kernfs: attach uuid for every kernfs and report it in fsid
kernfs: add stub helper for kernfs_generic_poll()
x86/resctrl: make pseudo_lock_class a static const structure
x86/MSR: make msr_class a static const structure
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull tty/serial driver updates from Greg KH:
"Here is the big set of tty and serial driver changes for 6.6-rc1.
Lots of cleanups in here this cycle, and some driver updates. Short
summary is:
- Jiri's continued work to make the tty code and apis be a bit more
sane with regards to modern kernel coding style and types
- cpm_uart driver updates
- n_gsm updates and fixes
- meson driver updates
- sc16is7xx driver updates
- 8250 driver updates for different hardware types
- qcom-geni driver fixes
- tegra serial driver change
- stm32 driver updates
- synclink_gt driver cleanups
- tty structure size reduction
All of these have been in linux-next this week with no reported
issues. The last bit of cleanups from Jiri and the tty structure size
reduction came in last week, a bit late but as they were just style
changes and size reductions, I figured they should get into this merge
cycle so that others can work on top of them with no merge conflicts"
* tag 'tty-6.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (199 commits)
tty: shrink the size of struct tty_struct by 40 bytes
tty: n_tty: deduplicate copy code in n_tty_receive_buf_real_raw()
tty: n_tty: extract ECHO_OP processing to a separate function
tty: n_tty: unify counts to size_t
tty: n_tty: use u8 for chars and flags
tty: n_tty: simplify chars_in_buffer()
tty: n_tty: remove unsigned char casts from character constants
tty: n_tty: move newline handling to a separate function
tty: n_tty: move canon handling to a separate function
tty: n_tty: use MASK() for masking out size bits
tty: n_tty: make n_tty_data::num_overrun unsigned
tty: n_tty: use time_is_before_jiffies() in n_tty_receive_overrun()
tty: n_tty: use 'num' for writes' counts
tty: n_tty: use output character directly
tty: n_tty: make flow of n_tty_receive_buf_common() a bool
Revert "tty: serial: meson: Add a earlycon for the T7 SoC"
Documentation: devices.txt: Fix minors for ttyCPM*
Documentation: devices.txt: Remove ttySIOC*
Documentation: devices.txt: Remove ttyIOC*
serial: 8250_bcm7271: improve bcm7271 8250 port
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB / Thunderbolt / PHY driver updates from Greg KH:
"Here is the big set of USB, Thunderbolt, and PHY driver updates for
6.6-rc1. Included in here are:
- PHY driver additions and cleanups
- Thunderbolt minor additions and fixes
- USB MIDI 2 gadget support added
- dwc3 driver updates and additions
- Removal of some old USB wireless code that was missed when that
codebase was originally removed a few years ago, cleaning up some
core USB code paths
- USB core potential use-after-free fixes that syzbot from different
people/groups keeps tripping over
- typec updates and additions
- gadget fixes and cleanups
- loads of smaller USB core and driver cleanups all over the place
Full details are in the shortlog. All of these have been in linux-next
for a while with no reported problems"
* tag 'usb-6.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (154 commits)
platform/chrome: cros_ec_typec: Configure Retimer cable type
tcpm: Avoid soft reset when partner does not support get_status
usb: typec: tcpm: reset counter when enter into unattached state after try role
usb: typec: tcpm: set initial svdm version based on pd revision
USB: serial: option: add FOXCONN T99W368/T99W373 product
USB: serial: option: add Quectel EM05G variant (0x030e)
usb: dwc2: add pci_device_id driver_data parse support
usb: gadget: remove max support speed info in bind operation
usb: gadget: composite: cleanup function config_ep_by_speed_and_alt()
usb: gadget: config: remove max speed check in usb_assign_descriptors()
usb: gadget: unconditionally allocate hs/ss descriptor in bind operation
usb: gadget: f_uvc: change endpoint allocation in uvc_function_bind()
usb: gadget: add a inline function gether_bitrate()
usb: gadget: use working speed to calcaulate network bitrate and qlen
dt-bindings: usb: samsung,exynos-dwc3: Add Exynos850 support
usb: dwc3: exynos: Add support for Exynos850 variant
usb: gadget: udc-xilinx: fix incorrect type in assignment warning
usb: gadget: udc-xilinx: fix cast from restricted __le16 warning
usb: gadget: udc-xilinx: fix restricted __le16 degrades to integer warning
USB: dwc2: hande irq on dead controller correctly
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86
Pull x86 platform driver updates from Hans de Goede:
- hp-bioscfg: New firmware-attributes driver for changing BIOS settings
from within Linux
- asus-wmi: Add charger mode, middle fan and eGPU settings support
- ideapad: Support keyboard backlight control on more models
- mellanox: Support for new models
- sel-3350: New LED and power-supply driver for this industrial
mainboard
- simatic-ipc: Add RTC battery monitor and various new models support
- miscellaneous other cleanups / fixes
* tag 'platform-drivers-x86-v6.6-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86: (101 commits)
platform/x86: asus-wmi: corrections to egpu safety check
platform/x86: mlx-platform: Add dependency on PCI to Kconfig
platform/x86: ideapad-laptop: Add support for keyboard backlights using KBLC ACPI symbol
platform/x86/amd/pmc: Fix build error with randconfig
platform/x86/amd/pmf: Fix a missing cleanup path
watchdog: simatic: Use idiomatic selection of P2SB
platform/x86: p2sb: Make the Kconfig symbol hidden
Documentation/ABI: Add new attribute for mlxreg-io sysfs interfaces
platform: mellanox: nvsw-sn2201: change fans i2c busses.
platform: mellanox: mlxreg-hotplug: Extend condition for notification callback processing
platform: mellanox: Add initial support for PCIe based programming logic device
platform: mellanox: mlx-platform: Get interrupt line through ACPI
platform: mellanox: mlx-platform: Introduce ACPI init flow
platform: mellanox: mlx-platform: Prepare driver to allow probing through ACPI infrastructure
platform: mellanox: mlx-platform: Add reset callback
platform: mellanox: Cosmetic changes
platform: mellanox: mlx-platform: Modify power off callback
platform: mellanox: mlx-platform: add support for additional CPLD
platform: mellanox: mlx-platform: Add reset cause attribute
platform: mellanox: mlx-platform: Modify health and power hotplug action
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull RISC-V updates from Palmer Dabbelt:
- Support for the new "riscv,isa-extensions" and "riscv,isa-base"
device tree interfaces for probing extensions
- Support for userspace access to the performance counters
- Support for more instructions in kprobes
- Crash kernels can be allocated above 4GiB
- Support for KCFI
- Support for ELFs in !MMU configurations
- ARCH_KMALLOC_MINALIGN has been reduced to 8
- mmap() defaults to sv48-sized addresses, with longer addresses hidden
behind a hint (similar to Arm and Intel)
- Also various fixes and cleanups
* tag 'riscv-for-linus-6.6-mw1' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: (51 commits)
lib/Kconfig.debug: Restrict DEBUG_INFO_SPLIT for RISC-V
riscv: support PREEMPT_DYNAMIC with static keys
riscv: Move create_tmp_mapping() to init sections
riscv: Mark KASAN tmp* page tables variables as static
riscv: mm: use bitmap_zero() API
riscv: enable DEBUG_FORCE_FUNCTION_ALIGN_64B
riscv: remove redundant mv instructions
RISC-V: mm: Document mmap changes
RISC-V: mm: Update pgtable comment documentation
RISC-V: mm: Add tests for RISC-V mm
RISC-V: mm: Restrict address space for sv39,sv48,sv57
riscv: enable DMA_BOUNCE_UNALIGNED_KMALLOC for !dma_coherent
riscv: allow kmalloc() caches aligned to the smallest value
riscv: support the elf-fdpic binfmt loader
binfmt_elf_fdpic: support 64-bit systems
riscv: Allow CONFIG_CFI_CLANG to be selected
riscv/purgatory: Disable CFI
riscv: Add CFI error handling
riscv: Add ftrace_stub_graph
riscv: Add types to indirectly called assembly functions
...
|
|
Pull nfsd updates from Chuck Lever:
"I'm thrilled to announce that the Linux in-kernel NFS server now
offers NFSv4 write delegations. A write delegation enables a client to
cache data and metadata for a single file more aggressively, reducing
network round trips and server workload. Many thanks to Dai Ngo for
contributing this facility, and to Jeff Layton and Neil Brown for
reviewing and testing it.
This release also sees the removal of all support for DES- and
triple-DES-based Kerberos encryption types in the kernel's SunRPC
implementation. These encryption types have been deprecated by the
Internet community for years and are considered insecure. This change
affects both the in-kernel NFS client and server.
The server's UDP and TCP socket transports have now fully adopted
David Howells' new bio_vec iterator so that no more than one sendmsg()
call is needed to transmit each RPC message. In particular, this helps
kTLS optimize record boundaries when sending RPC-with-TLS replies, and
it takes the server a baby step closer to handling file I/O via
folios.
We've begun work on overhauling the SunRPC thread scheduler to remove
a costly linked-list walk when looking for an idle RPC service thread
to wake. The pre-requisites are included in this release. Thanks to
Neil Brown for his ongoing work on this improvement"
* tag 'nfsd-6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux: (56 commits)
Documentation: Add missing documentation for EXPORT_OP flags
SUNRPC: Remove unused declaration rpc_modcount()
SUNRPC: Remove unused declarations
NFSD: da_addr_body field missing in some GETDEVICEINFO replies
SUNRPC: Remove return value of svc_pool_wake_idle_thread()
SUNRPC: make rqst_should_sleep() idempotent()
SUNRPC: Clean up svc_set_num_threads
SUNRPC: Count ingress RPC messages per svc_pool
SUNRPC: Deduplicate thread wake-up code
SUNRPC: Move trace_svc_xprt_enqueue
SUNRPC: Add enum svc_auth_status
SUNRPC: change svc_xprt::xpt_flags bits to enum
SUNRPC: change svc_rqst::rq_flags bits to enum
SUNRPC: change svc_pool::sp_flags bits to enum
SUNRPC: change cache_head.flags bits to enum
SUNRPC: remove timeout arg from svc_recv()
SUNRPC: change svc_recv() to return void.
SUNRPC: call svc_process() from svc_recv().
nfsd: separate nfsd_last_thread() from nfsd_put()
nfsd: Simplify code around svc_exit_thread() call in nfsd()
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc updates from Michael Ellerman:
- Add HOTPLUG_SMT support (/sys/devices/system/cpu/smt) and honour the
configured SMT state when hotplugging CPUs into the system
- Combine final TLB flush and lazy TLB mm shootdown IPIs when using the
Radix MMU to avoid a broadcast TLBIE flush on exit
- Drop the exclusion between ptrace/perf watchpoints, and drop the now
unused associated arch hooks
- Add support for the "nohlt" command line option to disable CPU idle
- Add support for -fpatchable-function-entry for ftrace, with GCC >=
13.1
- Rework memory block size determination, and support 256MB size on
systems with GPUs that have hotpluggable memory
- Various other small features and fixes
Thanks to Andrew Donnellan, Aneesh Kumar K.V, Arnd Bergmann, Athira
Rajeev, Benjamin Gray, Christophe Leroy, Frederic Barrat, Gautam
Menghani, Geoff Levand, Hari Bathini, Immad Mir, Jialin Zhang, Joel
Stanley, Jordan Niethe, Justin Stitt, Kajol Jain, Kees Cook, Krzysztof
Kozlowski, Laurent Dufour, Liang He, Linus Walleij, Mahesh Salgaonkar,
Masahiro Yamada, Michal Suchanek, Nageswara R Sastry, Nathan Chancellor,
Nathan Lynch, Naveen N Rao, Nicholas Piggin, Nick Desaulniers, Omar
Sandoval, Randy Dunlap, Reza Arbab, Rob Herring, Russell Currey, Sourabh
Jain, Thomas Gleixner, Trevor Woerner, Uwe Kleine-König, Vaibhav Jain,
Xiongfeng Wang, Yuan Tan, Zhang Rui, and Zheng Zengkai.
* tag 'powerpc-6.6-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (135 commits)
macintosh/ams: linux/platform_device.h is needed
powerpc/xmon: Reapply "Relax frame size for clang"
powerpc/mm/book3s64: Use 256M as the upper limit with coherent device memory attached
powerpc/mm/book3s64: Fix build error with SPARSEMEM disabled
powerpc/iommu: Fix notifiers being shared by PCI and VIO buses
powerpc/mpc5xxx: Add missing fwnode_handle_put()
powerpc/config: Disable SLAB_DEBUG_ON in skiroot
powerpc/pseries: Remove unused hcall tracing instruction
powerpc/pseries: Fix hcall tracepoints with JUMP_LABEL=n
powerpc: dts: add missing space before {
powerpc/eeh: Use pci_dev_id() to simplify the code
powerpc/64s: Move CPU -mtune options into Kconfig
powerpc/powermac: Fix unused function warning
powerpc/pseries: Rework lppaca_shared_proc() to avoid DEBUG_PREEMPT
powerpc: Don't include lppaca.h in paca.h
powerpc/pseries: Move hcall_vphn() prototype into vphn.h
powerpc/pseries: Move VPHN constants into vphn.h
cxl: Drop unused detach_spa()
powerpc: Drop zalloc_maybe_bootmem()
powerpc/powernv: Use struct opal_prd_msg in more places
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 shadow stack support from Dave Hansen:
"This is the long awaited x86 shadow stack support, part of Intel's
Control-flow Enforcement Technology (CET).
CET consists of two related security features: shadow stacks and
indirect branch tracking. This series implements just the shadow stack
part of this feature, and just for userspace.
The main use case for shadow stack is providing protection against
return oriented programming attacks. It works by maintaining a
secondary (shadow) stack using a special memory type that has
protections against modification. When executing a CALL instruction,
the processor pushes the return address to both the normal stack and
to the special permission shadow stack. Upon RET, the processor pops
the shadow stack copy and compares it to the normal stack copy.
For more information, refer to the links below for the earlier
versions of this patch set"
Link: https://lore.kernel.org/lkml/20220130211838.8382-1-rick.p.edgecombe@intel.com/
Link: https://lore.kernel.org/lkml/20230613001108.3040476-1-rick.p.edgecombe@intel.com/
* tag 'x86_shstk_for_6.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (47 commits)
x86/shstk: Change order of __user in type
x86/ibt: Convert IBT selftest to asm
x86/shstk: Don't retry vm_munmap() on -EINTR
x86/kbuild: Fix Documentation/ reference
x86/shstk: Move arch detail comment out of core mm
x86/shstk: Add ARCH_SHSTK_STATUS
x86/shstk: Add ARCH_SHSTK_UNLOCK
x86: Add PTRACE interface for shadow stack
selftests/x86: Add shadow stack test
x86/cpufeatures: Enable CET CR4 bit for shadow stack
x86/shstk: Wire in shadow stack interface
x86: Expose thread features in /proc/$PID/status
x86/shstk: Support WRSS for userspace
x86/shstk: Introduce map_shadow_stack syscall
x86/shstk: Check that signal frame is shadow stack mem
x86/shstk: Check that SSP is aligned on sigreturn
x86/shstk: Handle signals for shadow stack
x86/shstk: Introduce routines modifying shstk
x86/shstk: Handle thread shadow stack
x86/shstk: Add user-mode shadow stack support
...
|
|
Make use of panel follower for the Ilitek ili9882t
driver by Cong Yang
|
|
Charlie Jenkins <charlie@rivosinc.com> says:
Make sv48 the default address space for mmap as some applications
currently depend on this assumption. Users can now select a
desired address space using a non-zero hint address to mmap. Previously,
requesting the default address space from mmap by passing zero as the hint
address would result in using the largest address space possible. Some
applications depend on empty bits in the virtual address space, like Go and
Java, so this patch provides more flexibility for application developers.
* b4-shazam-merge:
RISC-V: mm: Document mmap changes
RISC-V: mm: Update pgtable comment documentation
RISC-V: mm: Add tests for RISC-V mm
RISC-V: mm: Restrict address space for sv39,sv48,sv57
Link: https://lore.kernel.org/r/20230809232218.849726-1-charlie@rivosinc.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
Chen Jiahao <chenjiahao16@huawei.com> says:
On riscv, the current crash kernel allocation logic is trying to
allocate within 32bit addressible memory region by default, if
failed, try to allocate without 4G restriction.
In need of saving DMA zone memory while allocating a relatively large
crash kernel region, allocating the reserved memory top down in
high memory, without overlapping the DMA zone, is a mature solution.
Hence this patchset introduces the parameter option crashkernel=X,[high,low].
One can reserve the crash kernel from high memory above DMA zone range
by explicitly passing "crashkernel=X,high"; or reserve a memory range
below 4G with "crashkernel=X,low". Besides, there are few rules need
to take notice:
1. "crashkernel=X,[high,low]" will be ignored if "crashkernel=size"
is specified.
2. "crashkernel=X,low" is valid only when "crashkernel=X,high" is passed
and there is enough memory to be allocated under 4G.
3. When allocating crashkernel above 4G and no "crashkernel=X,low" is
specified, a 128M low memory will be allocated automatically for
swiotlb bounce buffer.
See Documentation/admin-guide/kernel-parameters.txt for more information.
To verify loading the crashkernel, adapted kexec-tools is attached below:
https://github.com/chenjh005/kexec-tools/tree/build-test-riscv-v2
Following test cases have been performed as expected:
1) crashkernel=256M //low=256M
2) crashkernel=1G //low=1G
3) crashkernel=4G //high=4G, low=128M(default)
4) crashkernel=4G crashkernel=256M,high //high=4G, low=128M(default), high is ignored
5) crashkernel=4G crashkernel=256M,low //high=4G, low=128M(default), low is ignored
6) crashkernel=4G,high //high=4G, low=128M(default)
7) crashkernel=256M,low //low=0M, invalid
8) crashkernel=4G,high crashkernel=256M,low //high=4G, low=256M
9) crashkernel=4G,high crashkernel=4G,low //high=0M, low=0M, invalid
10) crashkernel=512M@0xd0000000 //low=512M
11) crashkernel=1G,high crashkernel=0M,low //high=1G, low=0M
* b4-shazam-merge:
docs: kdump: Update the crashkernel description for riscv
riscv: kdump: Implement crashkernel=X,[high,low]
Link: https://lore.kernel.org/r/20230726175000.2536220-1-chenjiahao16@huawei.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
Pull VFIO updates from Alex Williamson:
- VFIO direct character device (cdev) interface support. This extracts
the vfio device fd from the container and group model, and is
intended to be the native uAPI for use with IOMMUFD (Yi Liu)
- Enhancements to the PCI hot reset interface in support of cdev usage
(Yi Liu)
- Fix a potential race between registering and unregistering vfio files
in the kvm-vfio interface and extend use of a lock to avoid extra
drop and acquires (Dmitry Torokhov)
- A new vfio-pci variant driver for the AMD/Pensando Distributed
Services Card (PDS) Ethernet device, supporting live migration (Brett
Creeley)
- Cleanups to remove redundant owner setup in cdx and fsl bus drivers,
and simplify driver init/exit in fsl code (Li Zetao)
- Fix uninitialized hole in data structure and pad capability
structures for alignment (Stefan Hajnoczi)
* tag 'vfio-v6.6-rc1' of https://github.com/awilliam/linux-vfio: (53 commits)
vfio/pds: Send type for SUSPEND_STATUS command
vfio/pds: fix return value in pds_vfio_get_lm_file()
pds_core: Fix function header descriptions
vfio: align capability structures
vfio/type1: fix cap_migration information leak
vfio/fsl-mc: Use module_fsl_mc_driver macro to simplify the code
vfio/cdx: Remove redundant initialization owner in vfio_cdx_driver
vfio/pds: Add Kconfig and documentation
vfio/pds: Add support for firmware recovery
vfio/pds: Add support for dirty page tracking
vfio/pds: Add VFIO live migration support
vfio/pds: register with the pds_core PF
pds_core: Require callers of register/unregister to pass PF drvdata
vfio/pds: Initial support for pds VFIO driver
vfio: Commonize combine_ranges for use in other VFIO drivers
kvm/vfio: avoid bouncing the mutex when adding and deleting groups
kvm/vfio: ensure kvg instance stays around in kvm_vfio_group_add()
docs: vfio: Add vfio device cdev description
vfio: Compile vfio_group infrastructure optionally
vfio: Move the IOMMU_CAP_CACHE_COHERENCY check in __vfio_register_dev()
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci
Pull PCI updates from Bjorn Helgaas:
"Enumeration:
- Add locking to read/modify/write PCIe Capability Register accessors
for Link Control and Root Control
- Use pci_dev_id() when possible instead of manually composing ID
from dev->bus->number and dev->devfn
Resource management:
- Move prototypes for __weak sysfs resource files to linux/pci.h to
fix 'no previous prototype' warnings
- Make more I/O port accesses depend on HAS_IOPORT
- Use devm_platform_get_and_ioremap_resource() instead of open-coding
platform_get_resource() followed by devm_ioremap_resource()
Power management:
- Ensure devices are powered up while accessing VPD
- If device is powered-up, keep it that way while polling for PME
- Only read PCI_PM_CTRL register when available, to avoid reading the
wrong register and corrupting dev->current_state
Virtualization:
- Avoid Secondary Bus Reset on NVIDIA T4 GPUs
Error handling:
- Remove unused pci_disable_pcie_error_reporting()
- Unexport pci_enable_pcie_error_reporting(), used only by aer.c
- Unexport pcie_port_bus_type, used only by PCI core
VGA:
- Simplify and clean up typos in VGA arbiter
Apple PCIe controller driver:
- Initialize pcie->nvecs (number of available MSIs) before use
Broadcom iProc PCIe controller driver:
- Use of_property_read_bool() instead of low-level accessors for
boolean properties
Broadcom STB PCIe controller driver:
- Assert PERST# when probing BCM2711 because some bootloaders don't
do it
Freescale i.MX6 PCIe controller driver:
- Add .host_deinit() callback so we can clean up things like
regulators on probe failure or driver unload
Freescale Layerscape PCIe controller driver:
- Add support for link-down notification so the endpoint driver can
process LINK_DOWN events
- Add suspend/resume support, including manual
PME_Turn_off/PME_TO_Ack handshake
- Save Link Capabilities during probe so they can be restored when
handling a link-up event, since the controller loses the Link Width
and Link Speed values during reset
Intel VMD host bridge driver:
- Fix disable of bridge windows during domain reset; previously we
cleared the base/limit registers, which actually left the windows
enabled
Marvell MVEBU PCIe controller driver:
- Remove unused busn member
Microchip PolarFlare PCIe controller driver:
- Fix interrupt bit definitions so the SEC and DED interrupt handlers
work correctly
- Make driver buildable as a module
- Read FPGA MSI configuration parameters from hardware instead of
hard-coding them
Microsoft Hyper-V host bridge driver:
- To avoid a NULL pointer dereference, skip MSI restore after
hibernate if MSI/MSI-X hasn't been enabled
NVIDIA Tegra194 PCIe controller driver:
- Revert 'PCI: tegra194: Enable support for 256 Byte payload' because
Linux doesn't know how to reduce MPS from to 256 to 128 bytes for
endpoints below a switch (because other devices below the switch
might already be operating), which leads to 'Malformed TLP' errors
Qualcomm PCIe controller driver:
- Add DT and driver support for interconnect bandwidth voting for
'pcie-mem' and 'cpu-pcie' interconnects
- Fix broken SDX65 'compatible' DT property
- Configure controller so MHI bus master clock will be switched off
while in ASPM L1.x states
- Use alignment restriction from EPF core in EPF MHI driver
- Add Endpoint eDMA support
- Add MHI eDMA support
- Add Snapdragon SM8450 support to the EPF MHI driversupport
- Add MHI eDMA support
- Add Snapdragon SM8450 support to the EPF MHI driversupport
- Add MHI eDMA support
- Add Snapdragon SM8450 support to the EPF MHI driversupport
- Add MHI eDMA support
- Add Snapdragon SM8450 support to the EPF MHI driver
- Use iATU for EPF MHI transfers smaller than 4K to avoid eDMA setup
latency
- Add sa8775p DT binding and driver support
Rockchip PCIe controller driver:
- Use 64-bit mask on MSI 64-bit PCI address to avoid zeroing out the
upper 32 bits
SiFive FU740 PCIe controller driver:
- Set the supported number of MSI vectors so we can use all available
MSI interrupts
Synopsys DesignWare PCIe controller driver:
- Add generic dwc suspend/resume APIs (dw_pcie_suspend_noirq() and
dw_pcie_resume_noirq()) to be called by controller driver
suspend/resume ops, and a controller callback to send PME_Turn_Off
MicroSemi Switchtec management driver:
- Add support for PCIe Gen5 devices
Miscellaneous:
- Reorder and compress to reduce size of struct pci_dev
- Fix race in DOE destroy_work_on_stack()
- Add stubs to avoid casts between incompatible function types
- Explicitly include correct DT includes to untangle headers"
* tag 'pci-v6.6-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci: (96 commits)
PCI: qcom-ep: Add ICC bandwidth voting support
dt-bindings: PCI: qcom: ep: Add interconnects path
PCI: qcom-ep: Treat unknown IRQ events as an error
dt-bindings: PCI: qcom: Fix SDX65 compatible
PCI: endpoint: Add kernel-doc for pci_epc_mem_init() API
PCI: epf-mhi: Use iATU for small transfers
PCI: epf-mhi: Add support for SM8450
PCI: epf-mhi: Add eDMA support
PCI: qcom-ep: Add eDMA support
PCI: epf-mhi: Make use of the alignment restriction from EPF core
PCI/PM: Only read PCI_PM_CTRL register when available
PCI: qcom: Add support for sa8775p SoC
dt-bindings: PCI: qcom: Add sa8775p compatible
PCI: qcom-ep: Pass alignment restriction to the EPF core
PCI: Simplify pcie_capability_clear_and_set_word() control flow
PCI: Tidy config space save/restore messages
PCI: Fix code formatting inconsistencies
PCI: Fix typos in docs and comments
PCI: Fix pci_bus_resetable(), pci_slot_resetable() name typos
PCI: Simplify pci_dev_driver()
...
|
|
Pull documentation updates from Jonathan Corbet:
"Documentation work keeps chugging along; this includes:
- Work from Carlos Bilbao to integrate rustdoc output into the
generated HTML documentation. This took some work to figure out how
to do it without slowing the docs build and without creating people
who don't have Rust installed, but Carlos got there
- Move the loongarch and mips architecture documentation under
Documentation/arch/
- Some more maintainer documentation from Jakub
... plus the usual assortment of updates, translations, and fixes"
* tag 'docs-6.6' of git://git.lwn.net/linux: (56 commits)
Docu: genericirq.rst: fix irq-example
input: docs: pxrc: remove reference to phoenix-sim
Documentation: serial-console: Fix literal block marker
docs/mm: remove references to hmm_mirror ops and clean typos
docs/zh_CN: correct regi_chg(),regi_add() to region_chg(),region_add()
Documentation: Fix typos
Documentation/ABI: Fix typos
scripts: kernel-doc: fix macro handling in enums
scripts: kernel-doc: parse DEFINE_DMA_UNMAP_[ADDR|LEN]
Documentation: riscv: Update boot image header since EFI stub is supported
Documentation: riscv: Add early boot document
Documentation: arm: Add bootargs to the table of added DT parameters
docs: kernel-parameters: Refer to the correct bitmap function
doc: update params of memhp_default_state=
docs: Add book to process/kernel-docs.rst
docs: sparse: fix invalid link addresses
docs: vfs: clean up after the iterate() removal
docs: Add a section on surveys to the researcher guidelines
docs: move mips under arch
docs: move loongarch under arch
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux
Pull clk subsystem updates from Stephen Boyd:
"This pull request is full of clk driver changes. In fact, there aren't
any changes to the clk framework this time around. That's probably
because everyone was on vacation (yours truly included). We did lose a
couple clk drivers this time around because nobody was using those
devices. That skews the diffstat a bit, but either way, nothing looks
out of the ordinary here. The usual suspects are chugging along adding
support for more SoCs and fixing bugs.
If I had to choose, I'd say the theme for the past few months has been
"polish". There's quite a few patches that migrate to
devm_platform_ioremap_resource() in here. And there's more than a
handful of patches that move the NR_CLKS define from the DT binding
header to the driver. There's even patches that migrate drivers to use
clk_parent_data and clk_hw to describe clk tree topology. It seems
that the spring (summer?) cleaning bug got some folks, or the
semiconductor shortage finally hit the software side.
New Drivers:
- StarFive JH7110 SoC clock drivers
- Qualcomm IPQ5018 Global Clock Controller driver
- Versa3 clk generator to support 48KHz playback/record with audio
codec on RZ/G2L SMARC EVK
Removed Drivers:
- Remove non-OF mmp clk drivers
- Remove OXNAS clk driver
Updates:
- Add __counted_by to struct clk_hw_onecell_data and struct
spmi_pmic_div_clk_cc
- Move defines for numbers of clks (NR_CLKS) from DT headers to
drivers
- Introduce kstrdup_and_replace() and use it
- Add PLL rates for Rockchip rk3568
- Add the display clock tree for Rockchip rv1126
- Add Audio Clock Generator (ADG) clocks on Renesas R-Car Gen3 and
RZ/G2 SoCs
- Convert sun9i-mmc clock to use
devm_platform_get_and_ioremap_resource()
- Fix function name in a comment in ccu_mmc_timing.c
- Parameter name correction for ccu_nkm_round_rate()
- Implement CLK_SET_RATE_PARENT for Allwinner NKM clocks, i.e.
consider alternative parent rates when determining clock rates
- Set CLK_SET_RATE_PARENT for Allwinner A64 pll-mipi
- Support finding closest (as opposed to closest but not higher)
clock rate for NM, NKM, mux and div type clocks, as use it for
Allwinner A64 pll-video0
- Prefer current parent rate if able to generate ideal clock rate for
Allwinner NKM clocks
- Clean up Qualcomm SMD RPM driver, with interconnect bus clocks
moved out to the interconnect drivers
- Fix various PM runtime bugs across many Qualcomm clk drivers
- Migrate Qualcomm MDM9615 is to parent_hw and parent_data
- Add network related resets on Qualcomm IPQ4019
- Add a couple missing USB related clocks to Qualcomm IPQ9574
- Add missing gpll0_sleep_clk_src to Qualcomm MSM8917 global clock
controller
- In the Qualcomm QDU1000 global clock controller, GDSCs, clkrefs,
and GPLL1 are added, while PCIe pipe clock, SDCC rcg ops are
corrected
- Add missing GDSCs to and correct GDSCs for the SC8280XP global
clock controller driver
- Support retention for the Qualcomm SC8280XP display clock
controller GDSCs.
- Qualcommm's SDCC apps_clk_src is marked with CLK_OPS_PARENT_ENABLE
to fix issues with missing parent clocks across sc7180, sm7150,
sm6350 and sm8250, while sm8450 is corrected to use floor ops
- Correct Qualcomm SM6350 GPU clock controller's clock supplies
- Drop unwanted clocks from the Qualcomm IPQ5332 GCC driver
- Add missing OXILICX GDSC to Qualcomm MSM8226 GCC
- Change the delay in the Qualcomm reset controller to fsleep() for
correctness
- Extend the Qualcomm SM83550 Video clock controller to support
SC8280XP
- Add graphics clock support on Renesas RZ/G2M, RZ/G2N, RZ/G2E, and
R-Car H3, M3-W, and M3-N SoCs
- Add Clocked Serial Interface (CSI) clocks on Renesas RZ/V2M
- Add PWM (MTU3) clock and reset on Renesas RZ/G2UL and RZ/Five
- Add the PDM IPC clock for i.MX93
- Add 519.75MHz frequency support for i.MX9 PLL
- Simplify the .determine_rate() implementation for i.MX GPR mux
- Make the i.MX8QXP LPCG clock use devm_platform_ioremap_resource()
- Add the audio mux clock to i.MX8
- Fix the SPLL2 MULT range for PLLv4
- Update the SPLL2 type in i.MX8ULP
- Fix the SAI4 clock on i.MX8MP
- Add silicon revision print for i.MX25 on clocks init
- Drop the return value from __mx25_clocks_init()
- Fix the clock pauses on no-op set_rate for i.MX8M composite clock
- Drop restrictions for i.MX PLL14xx and fix its max prediv value
- Drop the 393216000 and 361267200 from i.MX PLL14xx rate table to
allow glitch free switching"
* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (207 commits)
clk: qcom: Fix SM_GPUCC_8450 dependencies
clk: lmk04832: Support using PLL1_LD as SPI readback pin
clk: lmk04832: Don't disable vco clock on probe fail
clk: lmk04832: Set missing parent_names for output clocks
clk: mvebu: Convert to devm_platform_ioremap_resource()
clk: nuvoton: Convert to devm_platform_ioremap_resource()
clk: socfpga: agilex: Convert to devm_platform_ioremap_resource()
clk: ti: Use devm_platform_get_and_ioremap_resource()
clk: mediatek: Convert to devm_platform_ioremap_resource()
clk: hsdk-pll: Convert to devm_platform_ioremap_resource()
clk: gemini: Convert to devm_platform_ioremap_resource()
clk: fsl-sai: Convert to devm_platform_ioremap_resource()
clk: bm1880: Convert to devm_platform_ioremap_resource()
clk: axm5516: Convert to devm_platform_ioremap_resource()
clk: actions: Convert to devm_platform_ioremap_resource()
clk: cdce925: Remove redundant of_match_ptr()
clk: pxa910: Move number of clocks to driver source
clk: pxa1928: Move number of clocks to driver source
clk: pxa168: Move number of clocks to driver source
clk: mmp2: Move number of clocks to driver source
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl
Pull pin control updates from Linus Walleij:
"We have some patches to DTS[I] files in arm and arm64 as well, that
were merged here as DT headers were being changed.
The most interesting stuff is the Intel Tangier chip support and
AMLogic C3 in my opinion.
No core changes this time.
Drivers:
- Intel Tangier SoC pin control support
- AMLogic C3 SoC pin control support
- Texas Instruments AM654 SoC pin control support
- Qualcomm SM8350 and SM6115 LPASS (Low Power Audio Sub-System) pin
control support
- Qualcomm PMX75 and PM7550BA (Power Management) pin control support
- Qualcomm PMC8180 and PMC8180C (Power Management) pin control
support
- DROP the Oxnas driver as there is not enough of community interest
to keep carrying this ARM(11) port
Enhancements:
- Bias control in the MT7986 pin control driver
- Misc device tree binding enhancements such as the Broadcom 11351
being converted to YAML
- New macro: DEFINE_NOIRQ_DEV_PM_OPS() put to use
- Clean up some SPDX headers
- Handle non-unique devicetree subnode names in two Renesas drivers"
* tag 'pinctrl-v6.6-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (80 commits)
pinctrl: mlxbf3: Remove gpio_disable_free()
pinctrl: use capital "OR" for multiple licenses in SPDX
dt-bindings: pinctrl: renesas,rza2: Use 'additionalProperties' for child nodes
pinctrl: cherryview: fix address_space_handler() argument
pinctrl: intel: consolidate ACPI dependency
pinctrl: tegra: Switch to use DEFINE_NOIRQ_DEV_PM_OPS() helper
pinctrl: renesas: Switch to use DEFINE_NOIRQ_DEV_PM_OPS() helper
pinctrl: mvebu: Switch to use DEFINE_NOIRQ_DEV_PM_OPS() helper
pinctrl: at91: Switch to use DEFINE_NOIRQ_DEV_PM_OPS() helper
pinctrl: cherryview: Switch to use DEFINE_NOIRQ_DEV_PM_OPS() helper
pm: Introduce DEFINE_NOIRQ_DEV_PM_OPS() helper
pinctrl: mediatek: assign functions to configure pin bias on MT7986
pinctrl: mediatek: fix pull_type data for MT7981
dt-bindings: pinctrl: aspeed: Allow only defined pin mux node properties
dt-bindings: pinctrl: Drop 'phandle' properties
pinctrl: lynxpoint: Make use of pm_ptr()
pinctrl: baytrail: Make use of pm_ptr()
pinctrl: intel: Switch to use exported namespace
pinctrl: lynxpoint: reuse common functions from pinctrl-intel
pinctrl: cherryview: reuse common functions from pinctrl-intel
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux
Pull devicetree updates from Rob Herring:
"DT core:
- Add support for generating DT nodes for PCI devices. This is the
groundwork for applying overlays to PCI devices containing
non-discoverable downstream devices.
- DT unittest additions to check reverted changesets, to test for
refcount issues, and to test unresolved symbols. Also, various
clean-ups of the unittest along the way.
- Refactor node and property manipulation functions to better share
code with old API and changeset API
- Refactor changeset print functions to a common implementation
- Move some platform_device specific functions into of_platform.c
Bindings:
- Treewide fixing of typos
- Treewide clean-up of SPDX tags to use 'OR' consistently
- Last chunk of dropping unnecessary quotes. With that, the check for
unnecessary quotes is enabled in yamllint.
- Convert ftgmac100, zynqmp-genpd, pps-gpio, syna,rmi4, and qcom,ssbi
bindings to DT schema format
- Add Allwinner V3s xHCI USB, Saef SF-TC154B display, QCom SM8450
Inline Crypto Engine, QCom SM6115 UFS, QCom SDM670 PDC interrupt
controller, Arm 2022 Cortex cores, and QCom IPQ9574 Crypto bindings
- Fixes for Rockchip DWC PCI binding
- Ensure all properties are evaluated on USB connector schema
- Fix dt-check-compatible script to find of_device_id instances with
compiler annotations"
* tag 'devicetree-for-6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (64 commits)
dt-bindings: usb: Add V3s compatible string for OHCI
dt-bindings: usb: Add V3s compatible string for EHCI
dt-bindings: display: panel: mipi-dbi-spi: add Saef SF-TC154B
dt-bindings: vendor-prefixes: document Saef Technology
dt-bindings: thermal: lmh: update maintainer address
of: unittest: Fix of_unittest_pci_node() kconfig dependencies
dt-bindings: crypto: ice: Document sm8450 inline crypto engine
dt-bindings: ufs: qcom: Add ICE to sm8450 example
dt-bindings: ufs: qcom: Add sm6115 binding
dt-bindings: ufs: qcom: Add reg-names property for ICE
dt-bindings: yamllint: Enable quoted string check
dt-bindings: Drop remaining unneeded quotes
of: unittest-data: Fix whitespace - angular brackets
of: unittest-data: Fix whitespace - indentation
of: unittest-data: Fix whitespace - blank lines
of: unittest-data: Convert remaining overlay DTS files to sugar syntax
of: overlay: unittest: Add test for unresolved symbol
of: unittest: Add separators to of_unittest_overlay_high_level()
of: unittest: Cleanup partially-applied overlays
of: unittest: Merge of_unittest_apply{,_revert}_overlay_check()
...
|
|
Pull ARM devicetree updates from Arnd Bergmann:
"These are the devicetree updates for Arm and RISC-V based SoCs, mainly
from Qualcomm, NXP/Freescale, Aspeed, TI, Rockchips, Samsung, ST and
Starfive.
Only a few new SoC got added:
- TI AM62P5, a variant of the existing Sitara AM62x family
- Intel Agilex5, an FPGFA platform that includes an Cortex-A76/A55
SoC.
- Qualcomm ipq5018 is used in wireless access points
- Qualcomm SM4450 (Snapdragon 4 Gen 2) is a new low-end mobile phone
platform.
In total, 29 machines get added, which is low because of the summer
break. These cover SoCs from Aspeed, Broadcom, NXP, Samsung, ST,
Allwinner, Amlogic, Intel, Qualcomm, Rockchip, TI and T-Head. Most of
these are development and reference boards.
Despite not adding a lot of new machines, there are over 700 patches
in total, most of which are cleanups and minor fixes"
* tag 'soc-dt-6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (735 commits)
arm64: dts: use capital "OR" for multiple licenses in SPDX
ARM: dts: use capital "OR" for multiple licenses in SPDX
arm64: dts: qcom: sdm845-db845c: Mark cont splash memory region as reserved
ARM: dts: qcom: apq8064: add support to gsbi4 uart
riscv: dts: change TH1520 files to dual license
riscv: dts: thead: add BeagleV Ahead board device tree
dt-bindings: riscv: Add BeagleV Ahead board compatibles
ARM: dts: stm32: add SCMI PMIC regulators on stm32mp135f-dk board
ARM: dts: stm32: STM32MP13x SoC exposes SCMI regulators
dt-bindings: rcc: stm32: add STM32MP13 SCMI regulators IDs
ARM: dts: stm32: support display on stm32f746-disco board
ARM: dts: stm32: rename mmc_vcard to vcc-3v3 on stm32f746-disco
ARM: dts: stm32: add pin map for LTDC on stm32f7
ARM: dts: stm32: add ltdc support on stm32f746 MCU
arm64: dts: qcom: sm6350: Hook up PDC as wakeup-parent of TLMM
arm64: dts: qcom: sdm670: Hook up PDC as wakeup-parent of TLMM
arm64: dts: qcom: sa8775p: Hook up PDC as wakeup-parent of TLMM
arm64: dts: qcom: sc8280xp: Hook up PDC as wakeup-parent of TLMM
arm64: dts: qcom: sdm670: Add PDC
riscv: dts: starfive: fix jh7110 qspi sort order
...
|
|
Pull ARM SoC cleanups from Arnd Bergmann:
"These are all minor cleanups for platform specific code in arch/arm/
and some of the associated drivers. The majority of these are work
done by Rob Herring to improve the way devicetreee header files are
handled"
* tag 'soc-arm-6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (49 commits)
ARM: davinci: Drop unused includes
ARM: s5pv210: Explicitly include correct DT includes
ARM: dove: Drop unused includes
ARM: mvebu: Explicitly include correct DT includes
Documentation/process: maintainer-soc: document dtbs_check requirement for Samsung
MAINTAINER: samsung: document dtbs_check requirement for Samsung
Documentation/process: maintainer-soc: add clean platforms profile
MAINTAINERS: soc: reference maintainer profile
ARM: nspire: Remove unused header file mmio.h
ARM: nspire: Use syscon-reboot to handle restart
soc: fsl: Explicitly include correct DT includes
soc: xilinx: Explicitly include correct DT includes
soc: sunxi: Explicitly include correct DT includes
soc: rockchip: Explicitly include correct DT includes
soc: mediatek: Explicitly include correct DT includes
soc: aspeed: Explicitly include correct DT includes
firmware: Explicitly include correct DT includes
bus: Explicitly include correct DT includes
ARM: spear: Explicitly include correct DT includes
ARM: mvebu: Explicitly include correct DT includes
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC driver updates from Arnd Bergmann:
"The main change this time was the introduction of the drivers/genpd
subsystem that gets split out from drivers/soc to keep common
functionality together.
The SCMI driver subsystem gets an update to version 3.2 of the
specification. There are also updates to memory, reset and other
firmware drivers.
On the soc driver side, the updates are mostly cleanups across a
number of Arm platforms. On driver for loongarch adds power management
for DT based systems, another driver is for HiSilicon's Arm server
chips with their HCCS system health interface.
The remaining updates for the most part add support for additional
hardware in existing drivers or contain minor cleanups. Most of these
are for the Qualcomm Snapdragon platform"
* tag 'soc-drivers-6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (136 commits)
bus: fsl-mc: Use common ranges functions
soc: kunpeng_hccs: fix some sparse warnings about incorrect type
soc: loongson2_pm: add power management support
soc: dt-bindings: add loongson-2 pm
soc: rockchip: grf: Fix SDMMC not working on RK3588 with bus-width > 1
genpd: rockchip: Add PD_VO entry for rv1126
bus: ti-sysc: Fix cast to enum warning
soc: kunpeng_hccs: add MAILBOX dependency
MAINTAINERS: remove OXNAS entry
dt-bindings: interrupt-controller: arm,versatile-fpga-irq: mark oxnas compatible as deprecated
irqchip: irq-versatile-fpga: remove obsolete oxnas compatible
soc: qcom: aoss: Tidy up qmp_send() callers
soc: qcom: aoss: Format string in qmp_send()
soc: qcom: aoss: Move length requirements from caller
soc: kunpeng_hccs: fix size_t format string
soc: ti: k3-socinfo.c: Add JTAG ID for AM62PX
dt-bindings: firmware: qcom: scm: Updating VMID list
firmware: imx: scu-irq: support identifying SCU wakeup source from sysfs
firmware: imx: scu-irq: enlarge the IMX_SC_IRQ_NUM_GROUP
firmware: imx: scu-irq: add imx_scu_irq_get_status
...
|
|
* clk-qcom: (87 commits)
clk: qcom: Fix SM_GPUCC_8450 dependencies
clk: qcom: smd-rpm: Set XO rate and CLK_IS_CRITICAL on PCNoC
clk: qcom: smd-rpm: Add a way to define bus clocks with rate and flags
clk: qcom: gcc-ipq5018: change some variable static
clk: qcom: gcc-ipq4019: add missing networking resets
dt-bindings: clock: qcom: ipq4019: add missing networking resets
clk: qcom: gcc-msm8917: Enable GPLL0_SLEEP_CLK_SRC
dt-bindings: clock: gcc-msm8917: Add definition for GPLL0_SLEEP_CLK_SRC
clk: qcom: gcc-qdu1000: Update the RCGs ops
clk: qcom: gcc-qdu1000: Update the SDCC clock RCG ops
clk: qcom: gcc-qdu1000: Add support for GDSCs
clk: qcom: gcc-qdu1000: Add gcc_ddrss_ecpri_gsi_clk support
clk: qcom: gcc-qdu1000: Register gcc_gpll1_out_even clock
clk: qcom: gcc-qdu1000: Fix clkref clocks handling
clk: qcom: gcc-qdu1000: Fix gcc_pcie_0_pipe_clk_src clock handling
dt-bindings: clock: Update GCC clocks for QDU1000 and QRU1000 SoCs
clk: qcom: gcc-sm8450: Use floor ops for SDCC RCGs
clk: qcom: ipq5332: drop the gcc_apss_axi_clk_src clock
clk: qcom: ipq5332: drop the mem noc clocks
clk: qcom: gcc-msm8998: Don't check halt bit on some branch clks
...
|
|
'clk-lmk' into clk-next
- Add __counted_by to struct clk_hw_onecell_data and struct spmi_pmic_div_clk_cc
- Remove non-OF mmp clk drivers
- Move number of clks from DT headers to drivers
* clk-imx:
clk: imx: pll14xx: dynamically configure PLL for 393216000/361267200Hz
clk: imx: pll14xx: align pdiv with reference manual
clk: imx: composite-8m: fix clock pauses when set_rate would be a no-op
clk: imx25: make __mx25_clocks_init return void
clk: imx25: print silicon revision during init
dt-bindings: clocks: imx8mp: make sai4 a dummy clock
clk: imx8mp: fix sai4 clock
clk: imx: imx8ulp: update SPLL2 type
clk: imx: pllv4: Fix SPLL2 MULT range
clk: imx: imx8: add audio clock mux driver
dt-bindings: clock: fsl,imx8-acm: Add audio clock mux support
clk: imx: clk-imx8qxp-lpcg: Convert to devm_platform_ioremap_resource()
clk: imx: clk-gpr-mux: Simplify .determine_rate()
clk: imx: Add 519.75MHz frequency support for imx9 pll
clk: imx93: Add PDM IPG clk
dt-bindings: clock: imx93: Add PDM IPG clk
* clk-samsung:
dt-bindings: clock: samsung: remove define with number of clocks
clk: samsung: exynoautov9: do not define number of clocks in bindings
clk: samsung: exynos850: do not define number of clocks in bindings
clk: samsung: exynos7885: do not define number of clocks in bindings
clk: samsung: exynos5433: do not define number of clocks in bindings
clk: samsung: exynos5420: do not define number of clocks in bindings
clk: samsung: exynos5410: do not define number of clocks in bindings
clk: samsung: exynos5260: do not define number of clocks in bindings
clk: samsung: exynos5250: do not define number of clocks in bindings
clk: samsung: exynos4: do not define number of clocks in bindings
clk: samsung: exynos3250: do not define number of clocks in bindings
* clk-annotate:
clk: qcom: clk-spmi-pmic-div: Annotate struct spmi_pmic_div_clk_cc with __counted_by
clk: Annotate struct clk_hw_onecell_data with __counted_by
* clk-marvell:
clk: pxa910: Move number of clocks to driver source
clk: pxa1928: Move number of clocks to driver source
clk: pxa168: Move number of clocks to driver source
clk: mmp2: Move number of clocks to driver source
clk: mmp: Remove old non-OF clock drivers
* clk-lmk:
clk: lmk04832: Support using PLL1_LD as SPI readback pin
clk: lmk04832: Don't disable vco clock on probe fail
clk: lmk04832: Set missing parent_names for output clocks
|
|
'clk-rockchip' into clk-next
- Add Versa3 clk generator to support 48KHz playback/record with audio
codec on RZ/G2L SMARC EVK
- Introduce kstrdup_and_replace() and use it
* clk-versa:
clk: vc7: Use i2c_get_match_data() instead of device_get_match_data()
clk: vc5: Use i2c_get_match_data() instead of device_get_match_data()
clk: versaclock3: Switch to use i2c_driver's probe callback
clk: Add support for versa3 clock driver
dt-bindings: clock: Add Renesas versa3 clock generator bindings
* clk-strdup:
clk: ti: Replace kstrdup() + strreplace() with kstrdup_and_replace()
clk: tegra: Replace kstrdup() + strreplace() with kstrdup_and_replace()
driver core: Replace kstrdup() + strreplace() with kstrdup_and_replace()
lib/string_helpers: Add kstrdup_and_replace() helper
* clk-amlogic: (22 commits)
dt-bindings: soc: amlogic: document System Control registers
dt-bindings: clock: amlogic: convert amlogic,gxbb-aoclkc.txt to dt-schema
dt-bindings: clock: amlogic: convert amlogic,gxbb-clkc.txt to dt-schema
clk: meson: axg-audio: move bindings include to main driver
clk: meson: meson8b: move bindings include to main driver
clk: meson: a1: move bindings include to main driver
clk: meson: eeclk: move bindings include to main driver
clk: meson: aoclk: move bindings include to main driver
dt-bindings: clk: axg-audio-clkc: expose all clock ids
dt-bindings: clk: amlogic,a1-pll-clkc: expose all clock ids
dt-bindings: clk: amlogic,a1-peripherals-clkc: expose all clock ids
dt-bindings: clk: meson8b-clkc: expose all clock ids
dt-bindings: clk: g12a-aoclkc: expose all clock ids
dt-bindings: clk: g12a-clks: expose all clock ids
dt-bindings: clk: axg-clkc: expose all clock ids
dt-bindings: clk: gxbb-clkc: expose all clock ids
clk: meson: migrate axg-audio out of hw_onecell_data to drop NR_CLKS
clk: meson: migrate meson8b out of hw_onecell_data to drop NR_CLKS
clk: meson: migrate a1 clock drivers out of hw_onecell_data to drop NR_CLKS
clk: meson: migrate meson-aoclk out of hw_onecell_data to drop NR_CLKS
...
* clk-allwinner:
clk: sunxi-ng: nkm: Prefer current parent rate
clk: sunxi-ng: a64: select closest rate for pll-video0
clk: sunxi-ng: div: Support finding closest rate
clk: sunxi-ng: mux: Support finding closest rate
clk: sunxi-ng: nkm: Support finding closest rate
clk: sunxi-ng: nm: Support finding closest rate
clk: sunxi-ng: Add helper function to find closest rate
clk: sunxi-ng: Add feature to find closest rate
clk: sunxi-ng: a64: allow pll-mipi to set parent's rate
clk: sunxi-ng: nkm: consider alternative parent rates when determining rate
clk: sunxi-ng: nkm: Use correct parameter name for parent HW
clk: sunxi-ng: Modify mismatched function name
clk: sunxi: sun9i-mmc: Use devm_platform_get_and_ioremap_resource()
* clk-rockchip:
clk: rockchip: rv1126: Add PD_VO clock tree
clk: rockchip: rk3568: Fix PLL rate setting for 78.75MHz
clk: rockchip: rk3568: Add PLL rate for 101MHz
|
|
'clk-cleanup' into clk-next
- Remove OXNAS clk driver
* clk-bindings:
dt-bindings: clock: versal: Convert the xlnx,zynqmp-clk.txt to yaml
dt-bindings: clock: xlnx,versal-clk: drop select:false
dt-bindings: clock: versal: Add versal-net compatible string
dt-bindings: clock: ast2600: Add I3C and MAC reset definitions
dt-bindings: arm: hisilicon,cpuctrl: Merge "hisilicon,hix5hd2-clock" into parent binding
* clk-starfive:
reset: starfive: jh7110: Add StarFive STG/ISP/VOUT resets support
clk: starfive: Simplify .determine_rate()
clk: starfive: Add StarFive JH7110 Video-Output clock driver
clk: starfive: Add StarFive JH7110 Image-Signal-Process clock driver
clk: starfive: Add StarFive JH7110 System-Top-Group clock driver
clk: starfive: jh7110-sys: Add PLL clocks source from DTS
clk: starfive: Add StarFive JH7110 PLL clock driver
dt-bindings: clock: Add StarFive JH7110 Video-Output clock and reset generator
dt-bindings: clock: Add StarFive JH7110 Image-Signal-Process clock and reset generator
dt-bindings: clock: Add StarFive JH7110 System-Top-Group clock and reset generator
dt-bindings: clock: jh7110-syscrg: Add PLL clock inputs
dt-bindings: soc: starfive: Add StarFive syscon module
dt-bindings: clock: Add StarFive JH7110 PLL clock generator
* clk-rm:
dt-bindings: clk: oxnas: remove obsolete bindings
clk: oxnas: remove obsolete clock driver
* clk-renesas:
clk: renesas: rcar-gen3: Add ADG clocks
clk: renesas: r8a77965: Add 3DGE and ZG support
clk: renesas: r8a7796: Add 3DGE and ZG support
clk: renesas: r8a7795: Add 3DGE and ZG support
clk: renesas: emev2: Remove obsolete clkdev registration
clk: renesas: r9a07g043: Add MTU3a clock and reset entry
clk: renesas: rzg2l: Simplify .determine_rate()
clk: renesas: r9a09g011: Add CSI related clocks
clk: renesas: r8a774b1: Add 3DGE and ZG support
clk: renesas: r8a774e1: Add 3DGE and ZG support
clk: renesas: r8a774a1: Add 3DGE and ZG support
clk: renesas: rcar-gen3: Add support for ZG clock
* clk-cleanup:
clk: mvebu: Convert to devm_platform_ioremap_resource()
clk: nuvoton: Convert to devm_platform_ioremap_resource()
clk: socfpga: agilex: Convert to devm_platform_ioremap_resource()
clk: ti: Use devm_platform_get_and_ioremap_resource()
clk: mediatek: Convert to devm_platform_ioremap_resource()
clk: hsdk-pll: Convert to devm_platform_ioremap_resource()
clk: gemini: Convert to devm_platform_ioremap_resource()
clk: fsl-sai: Convert to devm_platform_ioremap_resource()
clk: bm1880: Convert to devm_platform_ioremap_resource()
clk: axm5516: Convert to devm_platform_ioremap_resource()
clk: actions: Convert to devm_platform_ioremap_resource()
clk: cdce925: Remove redundant of_match_ptr()
drivers: clk: keystone: Fix parameter judgment in _of_pll_clk_init()
clk: Explicitly include correct DT includes
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound updates from Takashi Iwai:
"We've received a fairly wide range of changes at this time, including
for ALSA and ASoC core, but all of them are rather small changes.
Here are some highlights:
ALSA / ASoC Core:
- Fixes of inconsistent locking around control API helpers
- A few new control API functions and cleanups
- Workarounds for potential UAFs by delayed kobj releases
- Unified PCM copy ops with iov_iter
- Continued efforts for ASoC API cleanups
ASoC:
- An adaptor to allow use of IIO DACs and ADCs in ASoC which pulls in
some IIO changes
- Create a library function for intlog10() and use it in the NAU8825
driver
- Convert drivers to use the more modern maple tree register cache
- Lots of work on the SOF framework, AMD and Intel drivers, including
a lot of cleanup and new device support
- Standardization of the presentation of jacks from drivers
- Provision of some generic sound card DT properties
- Support for AMD Van Gogh, AMD machines with MAX98388 and NAU8821,
AWInic AW88261, Cirrus Logic CS35L36 and CS42L43, various Intel
platforms including AVS machines with ES8336 and RT5663, Mediatek
MT7986, NXP i.MX93, RealTek RT1017 and StarFive JH7110
Others:
- New test coverage including ASoC and topology tests in KUnit; this
also involves enabling UML builds of ALSA since that's the default
KUnit test environment which pulls in the addition of some stubs to
the driver
- More enhancement of pcmtest driver
- A few fixes / enhancements of MIDI 2.0 UMP core
- Using PCI definitions in allover HD-audio code
- Support for Cirrus CS35L56 and TI TAS2781 HD-audio sub-codecs
- CS35L41 HD-audio sub-codec improvements
- Continued emu10k1 improvements"
* tag 'sound-6.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (693 commits)
ALSA: pcm: Fix missing fixup call in compat hw_refine ioctl
ASoC: dwc: i2s: Fix unused functions
ALSA: usb-audio: Don't try to submit URBs after disconnection
ALSA: emu10k1: add separate documentation for E-MU cards
ALSA: emu10k1: more documentation updates
ALSA: emu10k1: de-duplicate audigy-mixer.rst vs. sb-live-mixer.rst
ALSA: ump: Fix -Wformat-truncation warnings
ALSA: hda: Add missing dependency on CONFIG_EFI for Cirrus/TI sub-codecs
ALSA: doc: Fix missing backquote in midi-2.0.rst
ALSA: hda/realtek: Add quirk for mute LEDs on HP ENVY x360 15-eu0xxx
ALSA: hda/tas2781: Switch back to use struct i2c_driver's .probe()
ASoC: soc-core.c: Do not error if a DAI link component is not found
ASoC: codecs: Fix error code in aw88261_i2c_probe()
ASoC: audio-graph-card.c: move audio_graph_parse_of()
ASoC: cs42l43: Use new-style PM runtime macros
ALSA: documentation: Add description for USB MIDI 2.0 gadget driver
ALSA: ump: Don't create unused substreams for static blocks
ALSA: ump: Fill group names for legacy rawmidi substreams
ALSA: usb-audio: Attach legacy rawmidi after probing all UMP EPs
ALSA: ac97: Fix possible error value of *rac97
...
|
|
Pull drm updates from Dave Airlie:
"The drm core grew a new generic gpu virtual address manager, and new
execution locking helpers. These are used by nouveau now to provide
uAPI support for the userspace Vulkan driver. AMD had a bunch of new
IP core support, loads of refactoring around fbdev, but mostly just
the usual amount of stuff across the board.
core:
- fix gfp flags in drmm_kmalloc
gpuva:
- add new generic GPU VA manager (for nouveau initially)
syncobj:
- add new DRM_IOCTL_SYNCOBJ_EVENTFD ioctl
dma-buf:
- acquire resv lock for mmap() in exporters
- support dma-buf self import automatically
- docs fixes
backlight:
- fix fbdev interactions
atomic:
- improve logging
prime:
- remove struct gem_prim_mmap plus driver updates
gem:
- drm_exec: add locking over multiple GEM objects
- fix lockdep checking
fbdev:
- make fbdev userspace interfaces optional
- use linux device instead of fbdev device
- use deferred i/o helper macros in various drivers
- Make FB core selectable without drivers
- Remove obsolete flags FBINFO_DEFAULT and FBINFO_FLAG_DEFAULT
- Add helper macros and Kconfig tokens for DMA-allocated framebuffer
ttm:
- support init_on_free
- swapout fixes
panel:
- panel-edp: Support AUO B116XAB01.4
- Support Visionox R66451 plus DT bindings
- ld9040:
- Backlight support
- magic improved
- Kconfig fix
- Convert to of_device_get_match_data()
- Fix Kconfig dependencies
- simple:
- Set bpc value to fix warning
- Set connector type for AUO T215HVN01
- Support Innolux G156HCE-L01 plus DT bindings
- ili9881: Support TDO TL050HDV35 LCD panel plus DT bindings
- startek: Support KD070FHFID015 MIPI-DSI panel plus DT bindings
- sitronix-st7789v:
- Support Inanbo T28CP45TN89 plus DT bindings
- Support EDT ET028013DMA plus DT bindings
- Various cleanups
- edp: Add timings for N140HCA-EAC
- Allow panels and touchscreens to power sequence together
- Fix Innolux G156HCE-L01 LVDS clock
bridge:
- debugfs for chains support
- dw-hdmi:
- Improve support for YUV420 bus format
- CEC suspend/resume
- update EDID on HDMI detect
- dw-mipi-dsi: Fix enable/disable of DSI controller
- lt9611uxc: Use MODULE_FIRMWARE()
- ps8640: Remove broken EDID code
- samsung-dsim: Fix command transfer
- tc358764:
- Handle HS/VS polarity
- Use BIT() macro
- Various cleanups
- adv7511: Fix low refresh rate
- anx7625:
- Switch to macros instead of hardcoded values
- locking fixes
- tc358767: fix hardware delays
- sitronix-st7789v:
- Support panel orientation
- Support rotation property
- Add support for Jasonic JT240MHQS-HWT-EK-E3 plus DT bindings
amdgpu:
- SDMA 6.1.0 support
- HDP 6.1 support
- SMUIO 14.0 support
- PSP 14.0 support
- IH 6.1 support
- Lots of checkpatch cleanups
- GFX 9.4.3 updates
- Add USB PD and IFWI flashing documentation
- GPUVM updates
- RAS fixes
- DRR fixes
- FAMS fixes
- Virtual display fixes
- Soft IH fixes
- SMU13 fixes
- Rework PSP firmware loading for other IPs
- Kernel doc fixes
- DCN 3.0.1 fixes
- LTTPR fixes
- DP MST fixes
- DCN 3.1.6 fixes
- SMU 13.x fixes
- PSP 13.x fixes
- SubVP fixes
- GC 9.4.3 fixes
- Display bandwidth calculation fixes
- VCN4 secure submission fixes
- Allow building DC on RISC-V
- Add visible FB info to bo_print_info
- HBR3 fixes
- GFX9 MCBP fix
- GMC10 vmhub index fix
- GMC11 vmhub index fix
- Create a new doorbell manager
- SR-IOV fixes
- initial freesync panel replay support
- revert zpos properly until igt regression is fixeed
- use TTM to manage doorbell BAR
- Expose both current and average power via hwmon if supported
amdkfd:
- Cleanup CRIU dma-buf handling
- Use KIQ to unmap HIQ
- GFX 9.4.3 debugger updates
- GFX 9.4.2 debugger fixes
- Enable cooperative groups fof gfx11
- SVM fixes
- Convert older APUs to use dGPU path like newer APUs
- Drop IOMMUv2 path as it is no longer used
- TBA fix for aldebaran
i915:
- ICL+ DSI modeset sequence
- HDCP improvements
- MTL display fixes and cleanups
- HSW/BDW PSR1 restored
- Init DDI ports in VBT order
- General display refactors
- Start using plane scale factor for relative data rate
- Use shmem for dpt objects
- Expose RPS thresholds in sysfs
- Apply GuC SLPC min frequency softlimit correctly
- Extend Wa_14015795083 to TGL, RKL, DG1 and ADL
- Fix a VMA UAF for multi-gt platform
- Do not use stolen on MTL due to HW bug
- Check HuC and GuC version compatibility on MTL
- avoid infinite GPU waits due to premature release of request memory
- Fixes and updates for GSC memory allocation
- Display SDVO fixes
- Take stolen handling out of FBC code
- Make i915_coherent_map_type GT-centric
- Simplify shmem_create_from_object map_type
msm:
- SM6125 MDSS support
- DPU: SM6125 DPU support
- DSI: runtime PM support, burst mode support
- DSI PHY: SM6125 support in 14nm DSI PHY driver
- GPU: prepare for a7xx
- fix a690 firmware
- disable relocs on a6xx and newer
radeon:
- Lots of checkpatch cleanups
ast:
- improve device-model detection
- Represent BMV as virtual connector
- Report DP connection status
nouveau:
- add new exec/bind interface to support Vulkan
- document some getparam ioctls
- improve VRAM detection
- various fixes/cleanups
- workraound DPCD issues
ivpu:
- MMU updates
- debugfs support
- Support vpu4
virtio:
- add sync object support
atmel-hlcdc:
- Support inverted pixclock polarity
etnaviv:
- runtime PM cleanups
- hang handling fixes
exynos:
- use fbdev DMA helpers
- fix possible NULL ptr dereference
komeda:
- always attach encoder
omapdrm:
- use fbdev DMA helpers
ingenic:
- kconfig regmap fixes
loongson:
- support display controller
mediatek:
- Small mtk-dpi cleanups
- DisplayPort: support eDP and aux-bus
- Fix coverity issues
- Fix potential memory leak if vmap() fail
mgag200:
- minor fixes
mxsfb:
- support disabling overlay planes
panfrost:
- fix sync in IRQ handling
ssd130x:
- Support per-controller default resolution plus DT bindings
- Reduce memory-allocation overhead
- Improve intermediate buffer size computation
- Fix allocation of temporary buffers
- Fix pitch computation
- Fix shadow plane allocation
tegra:
- use fbdev DMA helpers
- Convert to devm_platform_ioremap_resource()
- support bridge/connector
- enable PM
tidss:
- Support TI AM625 plus DT bindings
- Implement new connector model plus driver updates
vkms:
- improve write back support
- docs fixes
- support gamma LUT
zynqmp-dpsub:
- misc fixes"
* tag 'drm-next-2023-08-30' of git://anongit.freedesktop.org/drm/drm: (1327 commits)
drm/gpuva_mgr: remove unused prev pointer in __drm_gpuva_sm_map()
drm/tests/drm_kunit_helpers: Place correct function name in the comment header
drm/nouveau: uapi: don't pass NO_PREFETCH flag implicitly
drm/nouveau: uvmm: fix unset region pointer on remap
drm/nouveau: sched: avoid job races between entities
drm/i915: Fix HPD polling, reenabling the output poll work as needed
drm: Add an HPD poll helper to reschedule the poll work
drm/i915: Fix TLB-Invalidation seqno store
drm/ttm/tests: Fix type conversion in ttm_pool_test
drm/msm/a6xx: Bail out early if setting GPU OOB fails
drm/msm/a6xx: Move LLC accessors to the common header
drm/msm/a6xx: Introduce a6xx_llc_read
drm/ttm/tests: Require MMU when testing
drm/panel: simple: Fix Innolux G156HCE-L01 LVDS clock
Revert "Revert "drm/amdgpu/display: change pipe policy for DCN 2.0""
drm/amdgpu: Add memory vendor information
drm/amd: flush any delayed gfxoff on suspend entry
drm/amdgpu: skip fence GFX interrupts disable/enable for S0ix
drm/amdgpu: Remove gfxoff check in GFX v9.4.3
drm/amd/pm: Update pci link speed for smu v13.0.6
...
|
|
Pull xfs updates from Chandan Babu:
- Chandan Babu will be taking over as the XFS release manager. He has
reviewed all the patches that are in this branch, though I'm signing
the branch one last time since I'm still technically maintainer. :P
- Create a maintainer entry profile for XFS in which we lay out the
various roles that I have played for many years. Aside from release
manager, the remaining roles are as yet unfilled.
- Start merging online repair -- we now have in-memory pageable memory
for staging btrees, a bunch of pending fixes, and we've started the
process of refactoring the scrub support code to support more of
repair. In particular, reaping of old blocks from damaged structures.
- Scrub the realtime summary file.
- Fix a bug where scrub's quota iteration only ever returned the root
dquot. Oooops.
- Fix some typos.
[ Pull request from Chandan Babu, but signed tag and description from
Darrick Wong, thus the first person singular above is Darrick, not
Chandan ]
* tag 'xfs-6.6-merge-1' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux: (37 commits)
fs/xfs: Fix typos in comments
xfs: fix dqiterate thinko
xfs: don't check reflink iflag state when checking cow fork
xfs: simplify returns in xchk_bmap
xfs: rewrite xchk_inode_is_allocated to work properly
xfs: hide xfs_inode_is_allocated in scrub common code
xfs: fix agf_fllast when repairing an empty AGFL
xfs: allow userspace to rebuild metadata structures
xfs: clear pagf_agflreset when repairing the AGFL
xfs: allow the user to cancel repairs before we start writing
xfs: don't complain about unfixed metadata when repairs were injected
xfs: implement online scrubbing of rtsummary info
xfs: always rescan allegedly healthy per-ag metadata after repair
xfs: move the realtime summary file scrubber to a separate source file
xfs: wrap ilock/iunlock operations on sc->ip
xfs: get our own reference to inodes that we want to scrub
xfs: track usage statistics of online fsck
xfs: improve xfarray quicksort pivot
xfs: create scaffolding for creating debugfs entries
xfs: cache pages used for xfarray quicksort convergence
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/overlayfs/vfs
Pull overlayfs updates from Amir Goldstein:
- add verification feature needed by composefs (Alexander Larsson)
- improve integration of overlayfs and fanotify (Amir Goldstein)
- fortify some overlayfs code (Andrea Righi)
* tag 'ovl-update-6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/overlayfs/vfs:
ovl: validate superblock in OVL_FS()
ovl: make consistent use of OVL_FS()
ovl: Kconfig: introduce CONFIG_OVERLAY_FS_DEBUG
ovl: auto generate uuid for new overlay filesystems
ovl: store persistent uuid/fsid with uuid=on
ovl: add support for unique fsid per instance
ovl: support encoding non-decodable file handles
ovl: Handle verity during copy-up
ovl: Validate verity xattr when resolving lowerdata
ovl: Add versioned header for overlay.metacopy xattr
ovl: Add framework for verity support
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/zohar/linux-integrity
Pull integrity subsystem updates from Mimi Zohar:
- With commit 099f26f22f58 ("integrity: machine keyring CA
configuration") certificates may be loaded onto the IMA keyring,
directly or indirectly signed by keys on either the "builtin" or the
"machine" keyrings.
With the ability for the system/machine owner to sign the IMA policy
itself without needing to recompile the kernel, update the IMA
architecture specific policy rules to require the IMA policy itself
be signed.
[ As commit 099f26f22f58 was upstreamed in linux-6.4, updating the
IMA architecture specific policy now to require signed IMA policies
may break userspace expectations. ]
- IMA only checked the file data hash was not on the system blacklist
keyring for files with an appended signature (e.g. kernel modules,
Power kernel image).
Check all file data hashes regardless of how it was signed
- Code cleanup, and a kernel-doc update
* tag 'integrity-v6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/zohar/linux-integrity:
kexec_lock: Replace kexec_mutex() by kexec_lock() in two comments
ima: require signed IMA policy when UEFI secure boot is enabled
integrity: Always reference the blacklist keyring with appraisal
ima: Remove deprecated IMA_TRUSTED_KEYRING Kconfig
|
|
git://git.infradead.org/users/hch/dma-mapping
Pull dma-maping updates from Christoph Hellwig:
- allow dynamic sizing of the swiotlb buffer, to cater for secure
virtualization workloads that require all I/O to be bounce buffered
(Petr Tesarik)
- move a declaration to a header (Arnd Bergmann)
- check for memory region overlap in dma-contiguous (Binglei Wang)
- remove the somewhat dangerous runtime swiotlb-xen enablement and
unexport is_swiotlb_active (Christoph Hellwig, Juergen Gross)
- per-node CMA improvements (Yajun Deng)
* tag 'dma-mapping-6.6-2023-08-29' of git://git.infradead.org/users/hch/dma-mapping:
swiotlb: optimize get_max_slots()
swiotlb: move slot allocation explanation comment where it belongs
swiotlb: search the software IO TLB only if the device makes use of it
swiotlb: allocate a new memory pool when existing pools are full
swiotlb: determine potential physical address limit
swiotlb: if swiotlb is full, fall back to a transient memory pool
swiotlb: add a flag whether SWIOTLB is allowed to grow
swiotlb: separate memory pool data from other allocator data
swiotlb: add documentation and rename swiotlb_do_find_slots()
swiotlb: make io_tlb_default_mem local to swiotlb.c
swiotlb: bail out of swiotlb_init_late() if swiotlb is already allocated
dma-contiguous: check for memory region overlap
dma-contiguous: support numa CMA for specified node
dma-contiguous: support per-numa CMA for all architectures
dma-mapping: move arch_dma_set_mask() declaration to header
swiotlb: unexport is_swiotlb_active
x86: always initialize xen-swiotlb when xen-pcifront is enabling
xen/pci: add flag for PCI passthrough being possible
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull non-MM updates from Andrew Morton:
- An extensive rework of kexec and crash Kconfig from Eric DeVolder
("refactor Kconfig to consolidate KEXEC and CRASH options")
- kernel.h slimming work from Andy Shevchenko ("kernel.h: Split out a
couple of macros to args.h")
- gdb feature work from Kuan-Ying Lee ("Add GDB memory helper
commands")
- vsprintf inclusion rationalization from Andy Shevchenko
("lib/vsprintf: Rework header inclusions")
- Switch the handling of kdump from a udev scheme to in-kernel
handling, by Eric DeVolder ("crash: Kernel handling of CPU and memory
hot un/plug")
- Many singleton patches to various parts of the tree
* tag 'mm-nonmm-stable-2023-08-28-22-48' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (81 commits)
document while_each_thread(), change first_tid() to use for_each_thread()
drivers/char/mem.c: shrink character device's devlist[] array
x86/crash: optimize CPU changes
crash: change crash_prepare_elf64_headers() to for_each_possible_cpu()
crash: hotplug support for kexec_load()
x86/crash: add x86 crash hotplug support
crash: memory and CPU hotplug sysfs attributes
kexec: exclude elfcorehdr from the segment digest
crash: add generic infrastructure for crash hotplug support
crash: move a few code bits to setup support of crash hotplug
kstrtox: consistently use _tolower()
kill do_each_thread()
nilfs2: fix WARNING in mark_buffer_dirty due to discarded buffer reuse
scripts/bloat-o-meter: count weak symbol sizes
treewide: drop CONFIG_EMBEDDED
lockdep: fix static memory detection even more
lib/vsprintf: declare no_hash_pointers in sprintf.h
lib/vsprintf: split out sprintf() and friends
kernel/fork: stop playing lockless games for exe_file replacement
adfs: delete unused "union adfs_dirtail" definition
...
|
|
The commits that introduced these flags neglected to update the
Documentation/filesystems/nfs/exporting.rst file.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull MM updates from Andrew Morton:
- Some swap cleanups from Ma Wupeng ("fix WARN_ON in
add_to_avail_list")
- Peter Xu has a series (mm/gup: Unify hugetlb, speed up thp") which
reduces the special-case code for handling hugetlb pages in GUP. It
also speeds up GUP handling of transparent hugepages.
- Peng Zhang provides some maple tree speedups ("Optimize the fast path
of mas_store()").
- Sergey Senozhatsky has improved te performance of zsmalloc during
compaction (zsmalloc: small compaction improvements").
- Domenico Cerasuolo has developed additional selftest code for zswap
("selftests: cgroup: add zswap test program").
- xu xin has doe some work on KSM's handling of zero pages. These
changes are mainly to enable the user to better understand the
effectiveness of KSM's treatment of zero pages ("ksm: support
tracking KSM-placed zero-pages").
- Jeff Xu has fixes the behaviour of memfd's
MEMFD_NOEXEC_SCOPE_NOEXEC_ENFORCED sysctl ("mm/memfd: fix sysctl
MEMFD_NOEXEC_SCOPE_NOEXEC_ENFORCED").
- David Howells has fixed an fscache optimization ("mm, netfs, fscache:
Stop read optimisation when folio removed from pagecache").
- Axel Rasmussen has given userfaultfd the ability to simulate memory
poisoning ("add UFFDIO_POISON to simulate memory poisoning with
UFFD").
- Miaohe Lin has contributed some routine maintenance work on the
memory-failure code ("mm: memory-failure: remove unneeded PageHuge()
check").
- Peng Zhang has contributed some maintenance work on the maple tree
code ("Improve the validation for maple tree and some cleanup").
- Hugh Dickins has optimized the collapsing of shmem or file pages into
THPs ("mm: free retracted page table by RCU").
- Jiaqi Yan has a patch series which permits us to use the healthy
subpages within a hardware poisoned huge page for general purposes
("Improve hugetlbfs read on HWPOISON hugepages").
- Kemeng Shi has done some maintenance work on the pagetable-check code
("Remove unused parameters in page_table_check").
- More folioification work from Matthew Wilcox ("More filesystem folio
conversions for 6.6"), ("Followup folio conversions for zswap"). And
from ZhangPeng ("Convert several functions in page_io.c to use a
folio").
- page_ext cleanups from Kemeng Shi ("minor cleanups for page_ext").
- Baoquan He has converted some architectures to use the
GENERIC_IOREMAP ioremap()/iounmap() code ("mm: ioremap: Convert
architectures to take GENERIC_IOREMAP way").
- Anshuman Khandual has optimized arm64 tlb shootdown ("arm64: support
batched/deferred tlb shootdown during page reclamation/migration").
- Better maple tree lockdep checking from Liam Howlett ("More strict
maple tree lockdep"). Liam also developed some efficiency
improvements ("Reduce preallocations for maple tree").
- Cleanup and optimization to the secondary IOMMU TLB invalidation,
from Alistair Popple ("Invalidate secondary IOMMU TLB on permission
upgrade").
- Ryan Roberts fixes some arm64 MM selftest issues ("selftests/mm fixes
for arm64").
- Kemeng Shi provides some maintenance work on the compaction code
("Two minor cleanups for compaction").
- Some reduction in mmap_lock pressure from Matthew Wilcox ("Handle
most file-backed faults under the VMA lock").
- Aneesh Kumar contributes code to use the vmemmap optimization for DAX
on ppc64, under some circumstances ("Add support for DAX vmemmap
optimization for ppc64").
- page-ext cleanups from Kemeng Shi ("add page_ext_data to get client
data in page_ext"), ("minor cleanups to page_ext header").
- Some zswap cleanups from Johannes Weiner ("mm: zswap: three
cleanups").
- kmsan cleanups from ZhangPeng ("minor cleanups for kmsan").
- VMA handling cleanups from Kefeng Wang ("mm: convert to
vma_is_initial_heap/stack()").
- DAMON feature work from SeongJae Park ("mm/damon/sysfs-schemes:
implement DAMOS tried total bytes file"), ("Extend DAMOS filters for
address ranges and DAMON monitoring targets").
- Compaction work from Kemeng Shi ("Fixes and cleanups to compaction").
- Liam Howlett has improved the maple tree node replacement code
("maple_tree: Change replacement strategy").
- ZhangPeng has a general code cleanup - use the K() macro more widely
("cleanup with helper macro K()").
- Aneesh Kumar brings memmap-on-memory to ppc64 ("Add support for
memmap on memory feature on ppc64").
- pagealloc cleanups from Kemeng Shi ("Two minor cleanups for pcp list
in page_alloc"), ("Two minor cleanups for get pageblock
migratetype").
- Vishal Moola introduces a memory descriptor for page table tracking,
"struct ptdesc" ("Split ptdesc from struct page").
- memfd selftest maintenance work from Aleksa Sarai ("memfd: cleanups
for vm.memfd_noexec").
- MM include file rationalization from Hugh Dickins ("arch: include
asm/cacheflush.h in asm/hugetlb.h").
- THP debug output fixes from Hugh Dickins ("mm,thp: fix sloppy text
output").
- kmemleak improvements from Xiaolei Wang ("mm/kmemleak: use
object_cache instead of kmemleak_initialized").
- More folio-related cleanups from Matthew Wilcox ("Remove _folio_dtor
and _folio_order").
- A VMA locking scalability improvement from Suren Baghdasaryan
("Per-VMA lock support for swap and userfaults").
- pagetable handling cleanups from Matthew Wilcox ("New page table
range API").
- A batch of swap/thp cleanups from David Hildenbrand ("mm/swap: stop
using page->private on tail pages for THP_SWAP + cleanups").
- Cleanups and speedups to the hugetlb fault handling from Matthew
Wilcox ("Change calling convention for ->huge_fault").
- Matthew Wilcox has also done some maintenance work on the MM
subsystem documentation ("Improve mm documentation").
* tag 'mm-stable-2023-08-28-18-26' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (489 commits)
maple_tree: shrink struct maple_tree
maple_tree: clean up mas_wr_append()
secretmem: convert page_is_secretmem() to folio_is_secretmem()
nios2: fix flush_dcache_page() for usage from irq context
hugetlb: add documentation for vma_kernel_pagesize()
mm: add orphaned kernel-doc to the rst files.
mm: fix clean_record_shared_mapping_range kernel-doc
mm: fix get_mctgt_type() kernel-doc
mm: fix kernel-doc warning from tlb_flush_rmaps()
mm: remove enum page_entry_size
mm: allow ->huge_fault() to be called without the mmap_lock held
mm: move PMD_ORDER to pgtable.h
mm: remove checks for pte_index
memcg: remove duplication detection for mem_cgroup_uncharge_swap
mm/huge_memory: work on folio->swap instead of page->private when splitting folio
mm/swap: inline folio_set_swap_entry() and folio_swap_entry()
mm/swap: use dedicated entry for swap in folio
mm/swap: stop using page->private on tail pages for THP_SWAP
selftests/mm: fix WARNING comparing pointer to 0
selftests: cgroup: fix test_kmem_memcg_deletion kernel mem check
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from Paolo Abeni:
"Core:
- Increase size limits for to-be-sent skb frag allocations. This
allows tun, tap devices and packet sockets to better cope with
large writes operations
- Store netdevs in an xarray, to simplify iterating over netdevs
- Refactor nexthop selection for multipath routes
- Improve sched class lifetime handling
- Add backup nexthop ID support for bridge
- Implement drop reasons support in openvswitch
- Several data races annotations and fixes
- Constify the sk parameter of routing functions
- Prepend kernel version to netconsole message
Protocols:
- Implement support for TCP probing the peer being under memory
pressure
- Remove hard coded limitation on IPv6 specific info placement inside
the socket struct
- Get rid of sysctl_tcp_adv_win_scale and use an auto-estimated per
socket scaling factor
- Scaling-up the IPv6 expired route GC via a separated list of
expiring routes
- In-kernel support for the TLS alert protocol
- Better support for UDP reuseport with connected sockets
- Add NEXT-C-SID support for SRv6 End.X behavior, reducing the SR
header size
- Get rid of additional ancillary per MPTCP connection struct socket
- Implement support for BPF-based MPTCP packet schedulers
- Format MPTCP subtests selftests results in TAP
- Several new SMC 2.1 features including unique experimental options,
max connections per lgr negotiation, max links per lgr negotiation
BPF:
- Multi-buffer support in AF_XDP
- Add multi uprobe BPF links for attaching multiple uprobes and usdt
probes, which is significantly faster and saves extra fds
- Implement an fd-based tc BPF attach API (TCX) and BPF link support
on top of it
- Add SO_REUSEPORT support for TC bpf_sk_assign
- Support new instructions from cpu v4 to simplify the generated code
and feature completeness, for x86, arm64, riscv64
- Support defragmenting IPv(4|6) packets in BPF
- Teach verifier actual bounds of bpf_get_smp_processor_id() and fix
perf+libbpf issue related to custom section handling
- Introduce bpf map element count and enable it for all program types
- Add a BPF hook in sys_socket() to change the protocol ID from
IPPROTO_TCP to IPPROTO_MPTCP to cover migration for legacy
- Introduce bpf_me_mcache_free_rcu() and fix OOM under stress
- Add uprobe support for the bpf_get_func_ip helper
- Check skb ownership against full socket
- Support for up to 12 arguments in BPF trampoline
- Extend link_info for kprobe_multi and perf_event links
Netfilter:
- Speed-up process exit by aborting ruleset validation if a fatal
signal is pending
- Allow NLA_POLICY_MASK to be used with BE16/BE32 types
Driver API:
- Page pool optimizations, to improve data locality and cache usage
- Introduce ndo_hwtstamp_get() and ndo_hwtstamp_set() to avoid the
need for raw ioctl() handling in drivers
- Simplify genetlink dump operations (doit/dumpit) providing them the
common information already populated in struct genl_info
- Extend and use the yaml devlink specs to [re]generate the split ops
- Introduce devlink selective dumps, to allow SF filtering SF based
on handle and other attributes
- Add yaml netlink spec for netlink-raw families, allow route, link
and address related queries via the ynl tool
- Remove phylink legacy mode support
- Support offload LED blinking to phy
- Add devlink port function attributes for IPsec
New hardware / drivers:
- Ethernet:
- Broadcom ASP 2.0 (72165) ethernet controller
- MediaTek MT7988 SoC
- Texas Instruments AM654 SoC
- Texas Instruments IEP driver
- Atheros qca8081 phy
- Marvell 88Q2110 phy
- NXP TJA1120 phy
- WiFi:
- MediaTek mt7981 support
- Can:
- Kvaser SmartFusion2 PCI Express devices
- Allwinner T113 controllers
- Texas Instruments tcan4552/4553 chips
- Bluetooth:
- Intel Gale Peak
- Qualcomm WCN3988 and WCN7850
- NXP AW693 and IW624
- Mediatek MT2925
Drivers:
- Ethernet NICs:
- nVidia/Mellanox:
- mlx5:
- support UDP encapsulation in packet offload mode
- IPsec packet offload support in eswitch mode
- improve aRFS observability by adding new set of counters
- extends MACsec offload support to cover RoCE traffic
- dynamic completion EQs
- mlx4:
- convert to use auxiliary bus instead of custom interface
logic
- Intel
- ice:
- implement switchdev bridge offload, even for LAG
interfaces
- implement SRIOV support for LAG interfaces
- igc:
- add support for multiple in-flight TX timestamps
- Broadcom:
- bnxt:
- use the unified RX page pool buffers for XDP and non-XDP
- use the NAPI skb allocation cache
- OcteonTX2:
- support Round Robin scheduling HTB offload
- TC flower offload support for SPI field
- Freescale:
- add XDP_TX feature support
- AMD:
- ionic: add support for PCI FLR event
- sfc:
- basic conntrack offload
- introduce eth, ipv4 and ipv6 pedit offloads
- ST Microelectronics:
- stmmac: maximze PTP timestamping resolution
- Virtual NICs:
- Microsoft vNIC:
- batch ringing RX queue doorbell on receiving packets
- add page pool for RX buffers
- Virtio vNIC:
- add per queue interrupt coalescing support
- Google vNIC:
- add queue-page-list mode support
- Ethernet high-speed switches:
- nVidia/Mellanox (mlxsw):
- add port range matching tc-flower offload
- permit enslavement to netdevices with uppers
- Ethernet embedded switches:
- Marvell (mv88e6xxx):
- convert to phylink_pcs
- Renesas:
- r8A779fx: add speed change support
- rzn1: enables vlan support
- Ethernet PHYs:
- convert mv88e6xxx to phylink_pcs
- WiFi:
- Qualcomm Wi-Fi 7 (ath12k):
- extremely High Throughput (EHT) PHY support
- RealTek (rtl8xxxu):
- enable AP mode for: RTL8192FU, RTL8710BU (RTL8188GU),
RTL8192EU and RTL8723BU
- RealTek (rtw89):
- Introduce Time Averaged SAR (TAS) support
- Connector:
- support for event filtering"
* tag 'net-next-6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1806 commits)
net: ethernet: mtk_wed: minor change in wed_{tx,rx}info_show
net: ethernet: mtk_wed: add some more info in wed_txinfo_show handler
net: stmmac: clarify difference between "interface" and "phy_interface"
r8152: add vendor/device ID pair for D-Link DUB-E250
devlink: move devlink_notify_register/unregister() to dev.c
devlink: move small_ops definition into netlink.c
devlink: move tracepoint definitions into core.c
devlink: push linecard related code into separate file
devlink: push rate related code into separate file
devlink: push trap related code into separate file
devlink: use tracepoint_enabled() helper
devlink: push region related code into separate file
devlink: push param related code into separate file
devlink: push resource related code into separate file
devlink: push dpipe related code into separate file
devlink: move and rename devlink_dpipe_send_and_alloc_skb() helper
devlink: push shared buffer related code into separate file
devlink: push port related code into separate file
devlink: push object register/unregister notifications into separate helpers
inet: fix IP_TRANSPARENT error handling
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6
Pull crypto updates from Herbert Xu:
"API:
- Move crypto engine callback from tfm ctx into algorithm object
- Fix atomic sleep bug in crypto_destroy_instance
- Move lib/mpi into lib/crypto
Algorithms:
- Add chacha20 and poly1305 implementation for powerpc p10
Drivers:
- Add AES skcipher and aead support to starfive
- Add Dynamic Boost Control support to ccp
- Add support for STM32P13 platform to stm32"
* tag 'v6.6-p1' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (149 commits)
Revert "dt-bindings: crypto: qcom,prng: Add SM8450"
crypto: chelsio - Remove unused declarations
X.509: if signature is unsupported skip validation
crypto: qat - fix crypto capability detection for 4xxx
crypto: drivers - Explicitly include correct DT includes
crypto: engine - Remove crypto_engine_ctx
crypto: zynqmp - Use new crypto_engine_op interface
crypto: virtio - Use new crypto_engine_op interface
crypto: stm32 - Use new crypto_engine_op interface
crypto: jh7110 - Use new crypto_engine_op interface
crypto: rk3288 - Use new crypto_engine_op interface
crypto: omap - Use new crypto_engine_op interface
crypto: keembay - Use new crypto_engine_op interface
crypto: sl3516 - Use new crypto_engine_op interface
crypto: caam - Use new crypto_engine_op interface
crypto: aspeed - Remove non-standard sha512 algorithms
crypto: aspeed - Use new crypto_engine_op interface
crypto: amlogic - Use new crypto_engine_op interface
crypto: sun8i-ss - Use new crypto_engine_op interface
crypto: sun8i-ce - Use new crypto_engine_op interface
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux
Pull gpio updates from Bartosz Golaszewski:
"We have a lot of code refactoring using common helpers and ended up
removing more lines then we're adding this release cycle.
Nothing really stands out, just small updates all over the place.
Core GPIOLIB updates:
- wake-up poll() in user-space on device unbind
- improve fwnode usage
- interrupt domain handling improvements
- correctly handle the ngpios property in gpio-mmio
Driver cleanups:
- remove unneeded calls to platform_set_drvdata() all around the
place
- remove unneeded of_match_ptr() expansions whenever a driver depends
on CONFIG_OF
- remove redundant calls to dev_err_probe() from gpio-omap and
gpio-davinci
Driver improvements:
- use autopointers and guards from cleanup.h in gpio-sim
- shrink code in gpio-sim using some common helpers
- convert the idio family of drivers to using gpio-regmap
- convert gpio-ws16c48 to using gpio-regmap
- use devres to simplify code in gpio-pisosr and gpio-mxc
- update gpio-sifive: support IRQ wake, improve interrupt handling,
allow building as module
- make gpio-ge and gpio-bcm-kona OF-independent (plus some minor
tweaks)
- add support for new models in gpio-pca953x and gpio-ds4520
- add runtime PM support to gpio-mxc
- fix a build warning in gpio-mxs
- add support for adding pin ranges to gpio-mlxbf3
- add counter/timer support to gpio-104-dio-48e
- switch to dynamic GPIO base allocation in gpio-vf610
- minor oneliners here and there
Device-tree bindings updates:
- enable the gpio-line-names property in snps,dw-apb and STMPE GPIO
- document new models in fsl-imx-gpio, ds4520 and pca95xx
- convert the bindings for brcm,kona-gpio to YAML"
* tag 'gpio-updates-for-v6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux: (94 commits)
gpio: pca953x: add support for TCA9538
dt-bindings: gpio: pca95xx: document new tca9538 chip
gpio: pca953x: Use i2c_get_match_data()
gpio: mlxbf3: use capital "OR" for multiple licenses in SPDX
gpio: pcf857x: Extend match data support for OF tables
gpio: vf610: switch to dynamic allocat GPIO base
gpiolib: provide and use gpiod_line_state_notify()
gpio: cdev: wake up lineevent poll() on device unbind
gpio: cdev: wake up linereq poll() on device unbind
gpio: cdev: wake up chardev poll() on device unbind
gpiolib: add a second blocking notifier to struct gpio_device
gpio: cdev: open-code to_gpio_chardev_data()
gpiolib: rename the gpio_device notifier
gpio: mlxbf3: Support add_pin_ranges()
gpio: mxc: Use helper function devm_clk_get_optional_enabled()
gpio: pca9570: fix kerneldoc
gpio: sim: simplify code with cleanup helpers
gpio: sim: replace memmove() + strstrip() with skip_spaces() + strim()
gpio: sim: simplify gpio_sim_device_config_live_store()
gpio: mxc: release the parent IRQ in runtime suspend
...
|