| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
I wrote:
"Char/Misc fixes for 4.19-rc7
Here are 8 small fixes for some char/misc driver issues
Included here are:
- fpga driver fixes
- thunderbolt bugfixes
- firmware core revert/fix
- hv core fix
- hv tool fix
All of these have been in linux-next with no reported issues."
* tag 'char-misc-4.19-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
thunderbolt: Initialize after IOMMUs
thunderbolt: Do not handle ICM events after domain is stopped
firmware: Always initialize the fw_priv list object
docs: fpga: document fpga manager flags
fpga: bridge: fix obvious function documentation error
tools: hv: fcopy: set 'error' in case an unknown operation was requested
fpga: do not access region struct after fpga_region_unregister
Drivers: hv: vmbus: Use get/put_cpu() in vmbus_connect()
|
|
David writes:
"Networking fixes:
1) Prefix length validation in xfrm layer, from Steffen Klassert.
2) TX status reporting fix in mac80211, from Andrei Otcheretianski.
3) Fix hangs due to TX_DROP in mac80211, from Bob Copeland.
4) Fix DMA error regression in b43, from Larry Finger.
5) Add input validation to xenvif_set_hash_mapping(), from Jan Beulich.
6) SMMU unmapping fix in hns driver, from Yunsheng Lin.
7) Bluetooh crash in unpairing on SMP, from Matias Karhumaa.
8) WoL handling fixes in the phy layer, from Heiner Kallweit.
9) Fix deadlock in bonding, from Mahesh Bandewar.
10) Fill ttl inherit infor in vxlan driver, from Hangbin Liu.
11) Fix TX timeouts during netpoll, from Michael Chan.
12) RXRPC layer fixes from David Howells.
13) Another batch of ndo_poll_controller() removals to deal with
excessive resource consumption during load. From Eric Dumazet.
14) Fix a specific TIPC failure secnario, from LUU Duc Canh.
15) Really disable clocks in r8169 during suspend so that low
power states can actually be reached.
16) Fix SYN backlog lockdep issue in tcp and dccp, from Eric Dumazet.
17) Fix RCU locking in netpoll SKB send, which shows up in bonding,
from Dave Jones.
18) Fix TX stalls in r8169, from Heiner Kallweit.
19) Fix locksup in nfp due to control message storms, from Jakub
Kicinski.
20) Various rmnet bug fixes from Subash Abhinov Kasiviswanathan and
Sean Tranchetti.
21) Fix use after free in ip_cmsg_recv_dstaddr(), from Eric Dumazet."
* gitolite.kernel.org:/pub/scm/linux/kernel/git/davem/net: (122 commits)
ixgbe: check return value of napi_complete_done()
sctp: fix fall-through annotation
r8169: always autoneg on resume
ipv4: fix use-after-free in ip_cmsg_recv_dstaddr()
net: qualcomm: rmnet: Fix incorrect allocation flag in receive path
net: qualcomm: rmnet: Fix incorrect allocation flag in transmit
net: qualcomm: rmnet: Skip processing loopback packets
net: systemport: Fix wake-up interrupt race during resume
rtnl: limit IFLA_NUM_TX_QUEUES and IFLA_NUM_RX_QUEUES to 4096
bonding: fix warning message
inet: make sure to grab rcu_read_lock before using ireq->ireq_opt
nfp: avoid soft lockups under control message storm
declance: Fix continuation with the adapter identification message
net: fec: fix rare tx timeout
r8169: fix network stalls due to missing bit TXCFG_AUTO_FIFO
tun: napi flags belong to tfile
tun: initialize napi_mutex unconditionally
tun: remove unused parameters
bond: take rcu lock in netpoll_send_skb_on_dev
rtnetlink: Fail dump if target netnsid is invalid
...
|
|
Bartlomiej writes:
"fbdev fixes for v4.19-rc7:
- fix OMAPFB_MEMORY_READ ioctl to not leak kernel memory in omapfb driver
(Tomi Valkeinen)
- add missing prepare/unprepare clock operations in pxa168fb driver
(Lubomir Rintel)
- add nobgrt option in efifb driver to disable ACPI BGRT logo restore
(Hans de Goede)
- fix spelling mistake in fall-through annotation in stifb driver
(Gustavo A. R. Silva)
- fix URL for uvesafb repository in the documentation (Adam Jackson)"
* tag 'fbdev-v4.19-rc7' of https://github.com/bzolnier/linux:
video/fbdev/stifb: Fix spelling mistake in fall-through annotation
uvesafb: Fix URLs in the documentation
efifb: BGRT: Add nobgrt option
fbdev/omapfb: fix omapfb_memory_read infoleak
pxa168fb: prepare the clock
|
|
Implements counter freezing for Arch Perfmon v4 (Skylake and
newer). This allows to speed up the PMI handler by avoiding
unnecessary MSR writes and make it more accurate.
The Arch Perfmon v4 PMI handler is substantially different than
the older PMI handler.
Differences to the old handler:
- It relies on counter freezing, which eliminates several MSR
writes from the PMI handler and lowers the overhead significantly.
It makes the PMI handler more accurate, as all counters get
frozen atomically as soon as any counter overflows. So there is
much less counting of the PMI handler itself.
With the freezing we don't need to disable or enable counters or
PEBS. Only BTS which does not support auto-freezing still needs to
be explicitly managed.
- The PMU acking is done at the end, not the beginning.
This makes it possible to avoid manual enabling/disabling
of the PMU, instead we just rely on the freezing/acking.
- The APIC is acked before reenabling the PMU, which avoids
problems with LBRs occasionally not getting unfreezed on Skylake.
- Looping is only needed to workaround a corner case which several PMIs
are very close to each other. For common cases, the counters are freezed
during PMI handler. It doesn't need to do re-check.
This patch:
- Adds code to enable v4 counter freezing
- Fork <=v3 and >=v4 PMI handlers into separate functions.
- Add kernel parameter to disable counter freezing. It took some time to
debug counter freezing, so in case there are new problems we added an
option to turn it off. Would not expect this to be used until there
are new bugs.
- Only for big core. The patch for small core will be posted later
separately.
Performance:
When profiling a kernel build on Kabylake with different perf options,
measuring the length of all NMI handlers using the nmi handler
trace point:
V3 is without counter freezing.
V4 is with counter freezing.
The value is the average cost of the PMI handler.
(lower is better)
perf options ` V3(ns) V4(ns) delta
-c 100000 1088 894 -18%
-g -c 100000 1862 1646 -12%
--call-graph lbr -c 100000 3649 3367 -8%
--c.g. dwarf -c 100000 2248 1982 -12%
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Cc: acme@kernel.org
Link: http://lkml.kernel.org/r/1533712328-2834-2-git-send-email-kan.liang@linux.intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
Avoid conflict with upcoming perf/core patches, merge in the RDT perf work.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
Add flags #defines to kerneldoc documentation in a
useful place.
Signed-off-by: Alan Tull <atull@kernel.org>
Acked-by: Moritz Fischer <mdf@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
Dmitry writes:
"Input updates for v4.19-rc5
Just a few driver fixes"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
Input: uinput - allow for max == min during input_absinfo validation
Input: elantech - enable middle button of touchpad on ThinkPad P72
Input: atakbd - fix Atari CapsLock behaviour
Input: atakbd - fix Atari keymap
Input: egalax_ts - add system wakeup support
Input: gpio-keys - fix a documentation index issue
|
|
The success of a cache pseudo-locked region is measured using
performance monitoring events that are programmed directly at the time
the user requests a measurement.
Modifying the performance event registers directly is not appropriate
since it circumvents the in-kernel perf infrastructure that exists to
manage these resources and provide resource arbitration to the
performance monitoring hardware.
The cache pseudo-locking measurements are modified to use the in-kernel
perf infrastructure. Performance events are created and validated with
the appropriate perf API. The performance counters are still read as
directly as possible to avoid the additional cache hits. This is
done safely by first ensuring with the perf API that the counters have
been programmed correctly and only accessing the counters in an
interrupt disabled section where they are not able to be moved.
As part of the transition to the in-kernel perf infrastructure the L2
and L3 measurements are split into two separate measurements that can
be triggered independently. This separation prevents additional cache
misses incurred during the extra testing code used to decide if a
L2 and/or L3 measurement should be made.
Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: fenghua.yu@intel.com
Cc: tony.luck@intel.com
Cc: peterz@infradead.org
Cc: acme@kernel.org
Cc: gavin.hindman@intel.com
Cc: jithu.joseph@intel.com
Cc: dave.hansen@intel.com
Cc: hpa@zytor.com
Link: https://lkml.kernel.org/r/fc24e728b446404f42c78573c506e98cd0599873.1537468643.git.reinette.chatre@intel.com
|
|
(fix documentation and sysctl access to treat it as such)
Tested:
# zcat /proc/config.gz | egrep ^CONFIG_HZ
CONFIG_HZ_1000=y
CONFIG_HZ=1000
# echo $[(1<<32)/1000 + 1] | tee /proc/sys/net/ipv4/tcp_probe_interval
4294968
tee: /proc/sys/net/ipv4/tcp_probe_interval: Invalid argument
# echo $[(1<<32)/1000] | tee /proc/sys/net/ipv4/tcp_probe_interval
4294967
# echo 0 | tee /proc/sys/net/ipv4/tcp_probe_interval
# echo -1 | tee /proc/sys/net/ipv4/tcp_probe_interval
-1
tee: /proc/sys/net/ipv4/tcp_probe_interval: Invalid argument
Signed-off-by: Maciej Żenczykowski <maze@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Signed-off-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media
Mauro briefly writes:
"media fixes for v4.19-rc5
some drivers and Kbuild fixes"
* tag 'media/v4.19-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media:
media: platform: fix cros-ec-cec build error
media: staging/media/mt9t031/Kconfig: remove bogus entry
media: i2c: mt9v111: Fix v4l2-ctrl error handling
media: camss: add missing includes
media: camss: Use managed memory allocations
media: camss: mark PM functions as __maybe_unused
media: af9035: prevent buffer overflow on write
media: video_function_calls.rst: drop obsolete video-set-attributes reference
|
|
Paolo writes:
"It's mostly small bugfixes and cleanups, mostly around x86 nested
virtualization. One important change, not related to nested
virtualization, is that the ability for the guest kernel to trap
CPUID instructions (in Linux that's the ARCH_SET_CPUID arch_prctl) is
now masked by default. This is because the feature is detected
through an MSR; a very bad idea that Intel seems to like more and
more. Some applications choke if the other fields of that MSR are
not initialized as on real hardware, hence we have to disable the
whole MSR by default, as was the case before Linux 4.12."
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (23 commits)
KVM: nVMX: Fix bad cleanup on error of get/set nested state IOCTLs
kvm: selftests: Add platform_info_test
KVM: x86: Control guest reads of MSR_PLATFORM_INFO
KVM: x86: Turbo bits in MSR_PLATFORM_INFO
nVMX x86: Check VPID value on vmentry of L2 guests
nVMX x86: check posted-interrupt descriptor addresss on vmentry of L2
KVM: nVMX: Wake blocked vCPU in guest-mode if pending interrupt in virtual APICv
KVM: VMX: check nested state and CR4.VMXE against SMM
kvm: x86: make kvm_{load|put}_guest_fpu() static
x86/hyper-v: rename ipi_arg_{ex,non_ex} structures
KVM: VMX: use preemption timer to force immediate VMExit
KVM: VMX: modify preemption timer bit only when arming timer
KVM: VMX: immediately mark preemption timer expired only for zero value
KVM: SVM: Switch to bitmap_zalloc()
KVM/MMU: Fix comment in walk_shadow_page_lockless_end()
kvm: selftests: use -pthread instead of -lpthread
KVM: x86: don't reset root in kvm_mmu_setup()
kvm: mmu: Don't read PDPTEs when paging is not enabled
x86/kvm/lapic: always disable MMIO interface in x2APIC mode
KVM: s390: Make huge pages unavailable in ucontrol VMs
...
|
|
Add KVM_CAP_MSR_PLATFORM_INFO so that userspace can disable guest access
to reads of MSR_PLATFORM_INFO.
Disabling access to reads of this MSR gives userspace the control to "expose"
this platform-dependent information to guests in a clear way. As it exists
today, guests that read this MSR would get unpopulated information if userspace
hadn't already set it (and prior to this patch series, only the CPUID faulting
information could have been populated). This existing interface could be
confusing if guests don't handle the potential for incorrect/incomplete
information gracefully (e.g. zero reported for base frequency).
Signed-off-by: Drew Schmitt <dasch@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
gpio_keys.c now exists in the drivers/input/keyboard/ rather than
drivers/input/.
Signed-off-by: Song Qiang <songqiang.1304521@gmail.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kvms390/linux into HEAD
KVM: s390: Fixes for 4.19
- more fallout from the hugetlbfs enablement
- bugfix for vma handling
|
|
Dave writes:
"Various fixes, all over the place:
1) OOB data generation fix in bluetooth, from Matias Karhumaa.
2) BPF BTF boundary calculation fix, from Martin KaFai Lau.
3) Don't bug on excessive frags, to be compatible in situations mixing
older and newer kernels on each end. From Juergen Gross.
4) Scheduling in RCU fix in hv_netvsc, from Stephen Hemminger.
5) Zero keying information in TLS layer before freeing copies
of them, from Sabrina Dubroca.
6) Fix NULL deref in act_sample, from Davide Caratti.
7) Orphan SKB before GRO in veth to prevent crashes with XDP,
from Toshiaki Makita.
8) Fix use after free in ip6_xmit, from Eric Dumazet.
9) Fix VF mac address regression in bnxt_en, from Micahel Chan.
10) Fix MSG_PEEK behavior in TLS layer, from Daniel Borkmann.
11) Programming adjustments to r8169 which fix not being to enter deep
sleep states on some machines, from Kai-Heng Feng and Hans de
Goede.
12) Fix DST_NOCOUNT flag handling for ipv6 routes, from Peter
Oskolkov."
* gitolite.kernel.org:/pub/scm/linux/kernel/git/davem/net: (45 commits)
net/ipv6: do not copy dst flags on rt init
qmi_wwan: set DTR for modems in forced USB2 mode
clk: x86: Stop marking clocks as CLK_IS_CRITICAL
r8169: Get and enable optional ether_clk clock
clk: x86: add "ether_clk" alias for Bay Trail / Cherry Trail
r8169: enable ASPM on RTL8106E
r8169: Align ASPM/CLKREQ setting function with vendor driver
Revert "kcm: remove any offset before parsing messages"
kcm: remove any offset before parsing messages
net: ethernet: Fix a unused function warning.
net: dsa: mv88e6xxx: Fix ATU Miss Violation
tls: fix currently broken MSG_PEEK behavior
hv_netvsc: pair VF based on serial number
PCI: hv: support reporting serial number as slot information
bnxt_en: Fix VF mac address regression.
ipv6: fix possible use-after-free in ip6_xmit()
net: hp100: fix always-true check for link up state
ARM: dts: at91: add new compatibility string for macb on sama5d3
net: macb: disable scatter-gather for macb on sama5d3
net: mvpp2: let phylink manage the carrier state
...
|
|
We need this new compatibility string as we experienced different behavior
for this 10/100Mbits/s macb interface on this particular SoC.
Backward compatibility is preserved as we keep the alternative strings.
Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The Code of Conflict is not achieving its implicit goal of fostering
civility and the spirit of 'be excellent to each other'. Explicit
guidelines have demonstrated success in other projects and other areas
of the kernel.
Here is a Code of Conduct statement for the wider kernel. It is based
on the Contributor Covenant as described at www.contributor-covenant.org
From this point forward, we should abide by these rules in order to help
make the kernel community a welcoming environment to participate in.
Signed-off-by: Chris Mason <clm@fb.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Olof Johansson <olof@lxom.net>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Ingol Molnar:
"Misc fixes:
- EFI crash fix
- Xen PV fixes
- do not allow PTI on 2-level 32-bit kernels for now
- documentation fix"
* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/APM: Fix build warning when PROC_FS is not enabled
Revert "x86/mm/legacy: Populate the user page-table with user pgd's"
x86/efi: Load fixmap GDT in efi_call_phys_epilog() before setting %cr3
x86/xen: Disable CPU0 hotplug for Xen PV
x86/EISA: Don't probe EISA bus for Xen PV guests
x86/doc: Fix Documentation/x86/earlyprintk.txt
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip
Pull xen fixes from Juergen Gross:
"This contains some minor cleanups and fixes:
- a new knob for controlling scrubbing of pages returned by the Xen
balloon driver to the Xen hypervisor to address a boot performance
issue seen in large guests booted pre-ballooned
- a fix of a regression in the gntdev driver which made it impossible
to use fully virtualized guests (HVM guests) with a 4.19 based dom0
- a fix in Xen cpu hotplug functionality which could be triggered by
wrong admin commands (setting number of active vcpus to 0)
One further note: the patches have all been under test for several
days in another branch. This branch has been rebased in order to avoid
merge conflicts"
* tag 'for-linus-4.19c-rc4-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
xen/gntdev: fix up blockable calls to mn_invl_range_start
xen: fix GCC warning and remove duplicate EVTCHN_ROW/EVTCHN_COL usage
xen: avoid crash in disable_hotplug_cpu
xen/balloon: add runtime control for scrubbing ballooned out pages
xen/manage: don't complain about an empty value in control/sysrq node
|
|
Scrubbing pages on initial balloon down can take some time, especially
in nested virtualization case (nested EPT is slow). When HVM/PVH guest is
started with memory= significantly lower than maxmem=, all the extra
pages will be scrubbed before returning to Xen. But since most of them
weren't used at all at that point, Xen needs to populate them first
(from populate-on-demand pool). In nested virt case (Xen inside KVM)
this slows down the guest boot by 15-30s with just 1.5GB needed to be
returned to Xen.
Add runtime parameter to enable/disable it, to allow initially disabling
scrubbing, then enable it back during boot (for example in initramfs).
Such usage relies on assumption that a) most pages ballooned out during
initial boot weren't used at all, and b) even if they were, very few
secrets are in the guest at that time (before any serious userspace
kicks in).
Convert CONFIG_XEN_SCRUB_PAGES to CONFIG_XEN_SCRUB_PAGES_DEFAULT (also
enabled by default), controlling default value for the new runtime
switch.
Signed-off-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/vfs
Pull overlayfs fixes from Miklos Szeredi:
"This fixes a regression in the recent file stacking update, reported
and fixed by Amir Goldstein. The fix is fairly trivial, but involves
adding a fadvise() f_op and the associated churn in the vfs. As
discussed on -fsdevel, there are other possible uses for this method,
than allowing proper stacking for overlays.
And there's one other fix for a syzkaller detected oops"
* tag 'ovl-fixes-4.19-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/vfs:
ovl: fix oopses in ovl_fill_super() failure paths
ovl: add ovl_fadvise()
vfs: implement readahead(2) using POSIX_FADV_WILLNEED
vfs: add the fadvise() file operation
Documentation/filesystems: update documentation of file_operations
ovl: fix GPF in swapfile_activate of file from overlayfs over xfs
ovl: respect FIEMAP_FLAG_SYNC flag
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm
Pull device mapper fixes from Mike Snitzer:
- DM verity fix for crash due to using vmalloc'd buffers with the
asynchronous crypto hadsh API.
- Fix to both DM crypt and DM integrity targets to discontinue using
CRYPTO_TFM_REQ_MAY_SLEEP because its use of GFP_KERNEL can lead to
deadlock by recursing back into a filesystem.
- Various DM raid fixes related to reshape and rebuild races.
- Fix for DM thin-provisioning to avoid data corruption that was a
side-effect of needing to abort DM thin metadata transaction due to
running out of metadata space. Fix is to reserve a small amount of
metadata space so that once it is used the DM thin-pool can finish
its active transaction before switching to read-only mode.
* tag 'for-4.19/dm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm:
dm thin metadata: try to avoid ever aborting transactions
dm raid: bump target version, update comments and documentation
dm raid: fix RAID leg rebuild errors
dm raid: fix rebuild of specific devices by updating superblock
dm raid: fix stripe adding reshape deadlock
dm raid: fix reshape race on small devices
dm: disable CRYPTO_TFM_REQ_MAY_SLEEP to fix a GFP_KERNEL recursion deadlock
dm verity: fix crash on bufio buffer that was allocated with vmalloc
|
|
We currently do not notify all gmaps when using gmap_pmdp_xchg(), due
to locking constraints. This makes ucontrol VMs, which is the only VM
type that creates multiple gmaps, incompatible with huge pages. Also
we would need to hold the guest_table_lock of all gmaps that have this
vmaddr maped to synchronize access to the pmd.
ucontrol VMs are rather exotic and creating a new locking concept is
no easy task. Hence we return EINVAL when trying to active
KVM_CAP_S390_HPAGE_1M and report it as being not available when
checking for it.
Fixes: a4499382 ("KVM: s390: Add huge page enablement control")
Signed-off-by: Janosch Frank <frankja@linux.ibm.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Message-Id: <20180801112508.138159-1-frankja@linux.ibm.com>
Signed-off-by: Janosch Frank <frankja@linux.ibm.com>
|
|
Fix a few issues in Documentation/x86/earlyprintk.txt:
- correct typos, punctuation, missing word, wrong word
- change product name from Netchip to NetChip
- expand where to add "earlyprintk=dbg"
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Eric W. Biederman <ebiederm@xmission.com>
Cc: Jason Wessel <jason.wessel@windriver.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Yinghai Lu <yinghai@kernel.org>
Cc: linux-doc@vger.kernel.org
Cc: linux-usb@vger.kernel.org
Link: http://lkml.kernel.org/r/d0c40ac3-7659-6374-dbda-23d3d2577f30@infradead.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tytso/random
Pull random driver fix from Ted Ts'o:
"Fix things so the choice of whether or not to trust RDRAND to
initialize the CRNG is configurable via the boot option
random.trust_cpu={on,off}"
* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/random:
random: make CPU trust a boot parameter
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild fixes from Masahiro Yamada:
- make setlocalversion more robust about -dirty check
- loosen the pkg-config requirement for Kconfig
- change missing depmod to a warning from an error
- warn modules_install when System.map is missing
* tag 'kbuild-fixes-v4.19' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
kbuild: modules_install: warn when missing System.map file
kbuild: make missing $DEPMOD a Warning instead of an Error
kconfig: do not require pkg-config on make {menu,n}config
kconfig: remove a spurious self-assignment
scripts/setlocalversion: git: Make -dirty check more robust
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
Pull i2c fixes from Wolfram Sang:
- bugfixes for uniphier, i801, and xiic drivers
- ID removal (never produced) for imx
- one MAINTAINER addition
* 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
i2c: xiic: Record xilinx i2c with Zynq fragment
i2c: xiic: Make the start and the byte count write atomic
i2c: i801: fix DNV's SMBCTRL register offset
i2c: imx-lpi2c: Remove mx8dv compatible entry
dt-bindings: imx-lpi2c: Remove mx8dv compatible entry
i2c: uniphier-f: issue STOP only for last message or I2C_M_STOP
i2c: uniphier: issue STOP only for last message or I2C_M_STOP
|
|
Bump target version to reflect the documented fixes are available.
Also fix some code comments (typos and clarity).
Signed-off-by: Heinz Mauelshagen <heinzm@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"A set of very minor fixes and a couple of reverts to fix a major
problem (the attempt to change the busy count causes a hang when
attempting to change the drive cache type)"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: aacraid: fix a signedness bug
Revert "scsi: core: avoid host-wide host_busy counter for scsi_mq"
Revert "scsi: core: fix scsi_host_queue_ready"
scsi: libata: Add missing newline at end of file
scsi: target: iscsi: cxgbit: use pr_debug() instead of pr_info()
scsi: hpsa: limit transfer length to 1MB, not 512kB
scsi: lpfc: Correct MDS diag and nvmet configuration
scsi: lpfc: Default fdmi_on to on
scsi: csiostor: fix incorrect port capabilities
scsi: csiostor: add a check for NULL pointer after kmalloc()
scsi: documentation: add scsi_mod.use_blk_mq to scsi-parameters
scsi: core: Update SCSI_MQ_DEFAULT help text to match default
|
|
Pull networking fixes from David Miller:
1) Must perform TXQ teardown before unregistering interfaces in
mac80211, from Toke Høiland-Jørgensen.
2) Don't allow creating mac80211_hwsim with less than one channel, from
Johannes Berg.
3) Division by zero in cfg80211, fix from Johannes Berg.
4) Fix endian issue in tipc, from Haiqing Bai.
5) BPF sockmap use-after-free fixes from Daniel Borkmann.
6) Spectre-v1 in mac80211_hwsim, from Jinbum Park.
7) Missing rhashtable_walk_exit() in tipc, from Cong Wang.
8) Revert kvzalloc() conversion of AF_PACKET, it breaks mmap() when
kvzalloc() tries to use kmalloc() pages. From Eric Dumazet.
9) Fix deadlock in hv_netvsc, from Dexuan Cui.
10) Do not restart timewait timer on RST, from Florian Westphal.
11) Fix double lwstate refcount grab in ipv6, from Alexey Kodanev.
12) Unsolicit report count handling is off-by-one, fix from Hangbin Liu.
13) Sleep-in-atomic in cadence driver, from Jia-Ju Bai.
14) Respect ttl-inherit in ip6 tunnel driver, from Hangbin Liu.
15) Use-after-free in act_ife, fix from Cong Wang.
16) Missing hold to meta module in act_ife, from Vlad Buslov.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (91 commits)
net: phy: sfp: Handle unimplemented hwmon limits and alarms
net: sched: action_ife: take reference to meta module
act_ife: fix a potential use-after-free
net/mlx5: Fix SQ offset in QPs with small RQ
tipc: correct spelling errors for tipc_topsrv_queue_evt() comments
tipc: correct spelling errors for struct tipc_bc_base's comment
bnxt_en: Do not adjust max_cp_rings by the ones used by RDMA.
bnxt_en: Clean up unused functions.
bnxt_en: Fix firmware signaled resource change logic in open.
sctp: not traverse asoc trans list if non-ipv6 trans exists for ipv6_flowlabel
sctp: fix invalid reference to the index variable of the iterator
net/ibm/emac: wrong emac_calc_base call was used by typo
net: sched: null actions array pointer before releasing action
vhost: fix VHOST_GET_BACKEND_FEATURES ioctl request definition
r8169: add support for NCube 8168 network card
ip6_tunnel: respect ttl inherit for ip6tnl
mac80211: shorten the IBSS debug messages
mac80211: don't Tx a deauth frame if the AP forbade Tx
mac80211: Fix station bandwidth setting after channel switch
mac80211: fix a race between restart and CSA flows
...
|
|
mx8dv never entered into production and there is no other place
in the kernel referring to this SoC, so remove it from the
dt bindings documentation.
Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
|
|
The current cpsw usage for cpsw-phy-sel is undocumented but is used for
all the boards using cpsw. And cpsw-phy-sel is not really a child of
the cpsw device, it lives in the system control module instead.
Let's document the existing usage, and improve it a bit where we prefer
to use a phandle instead of a child device for it. That way we can
properly describe the hardware in dts files for things like genpd.
Cc: devicetree@vger.kernel.org
Cc: Andrew Lunn <andrew@lunn.ch>
Cc: Grygorii Strashko <grygorii.strashko@ti.com>
Cc: Ivan Khoronzhuk <ivan.khoronzhuk@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Murali Karicheri <m-karicheri2@ti.com>
Cc: Rob Herring <robh+dt@kernel.org>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Meelis Roos reported a {menu,n}config regression:
"I have libncurses devel package installed in the default system
location (as do 99%+ on actual developers probably) and in this
case, pkg-config is useless. pkg-config is needed only when
libraries and headers are installed in non-default locations but
it is bad to require installation of pkg-config on all the machines
where make menuconfig would be possibly run."
For {menu,n}config, do not use pkg-config if it is not installed.
For {g,x}config, keep checking pkg-config since we really rely on it
for finding the installation paths of the required packages.
Fixes: 4ab3b80159d4 ("kconfig: check for pkg-config on make {menu,n,g,x}config")
Reported-by: Meelis Roos <mroos@linux.ee>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Tested-by: Meelis Roos <mroos@linux.ee>
Tested-by: Randy Dunlap <rdunlap@infradead.org>
|
|
git://www.linux-watchdog.org/linux-watchdog
Pull watchdog fixlet from Wim Van Sebroeck:
"Document support for r8a774a1"
* tag 'linux-watchdog-4.19-rc2' of git://www.linux-watchdog.org/linux-watchdog:
dt-bindings: watchdog: renesas-wdt: Document r8a774a1 support
|
|
Instead of forcing a distro or other system builder to choose
at build time whether the CPU is trusted for CRNG seeding via
CONFIG_RANDOM_TRUST_CPU, provide a boot-time parameter for end users to
control the choice. The CONFIG will set the default state instead.
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 fixes from Will Deacon:
"A few arm64 fixes came in this week, specifically fixing some nasty
truncation of return values from firmware calls and resolving a
VM_BUG_ON due to accessing uninitialised struct pages corresponding to
NOMAP pages.
Summary:
- Fix typos in SVE documentation
- Fix type-checking and implicit truncation for SMCCC calls
- Force CONFIG_HOLES_IN_ZONE=y so that SLAB doesn't fall over NOMAP
regions"
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
arm64: mm: always enable CONFIG_HOLES_IN_ZONE
arm/arm64: smccc-1.1: Handle function result as parameters
arm/arm64: smccc-1.1: Make return values unsigned long
Documentation/arm64/sve: Couple of improvements and typos
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip
Pull xen fixes from Juergen Gross:
- minor cleanup avoiding a warning when building with new gcc
- a patch to add a new sysfs node for Xen frontend/backend drivers to
make it easier to obtain the state of a pv device
- two fixes for 32-bit pv-guests to avoid intermediate L1TF vulnerable
PTEs
* tag 'for-linus-4.19b-rc2-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
x86/xen: remove redundant variable save_pud
xen: export device state to sysfs
x86/pae: use 64 bit atomic xchg function in native_ptep_get_and_clear
x86/xen: don't write ptes directly in 32-bit PV guests
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
Pull i2c fixes from Wolfram Sang:
- regression fixes for i801 and designware
- better API and leak fix for releasing DMA safe buffers
- better greppable strings for the bitbang algorithm
* 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
i2c: sh_mobile: fix leak when using DMA bounce buffer
i2c: sh_mobile: define start_ch() void as it only returns 0 anyhow
i2c: refactor function to release a DMA safe buffer
i2c: algos: bit: make the error messages grepable
i2c: designware: Re-init controllers with pm_disabled set on resume
i2c: i801: Allow ACPI AML access I/O ports not reserved for SMBus
|
|
a) rename to 'put' instead of 'release' to match 'get' when obtaining
the buffer
b) change the argument order to have the buffer as first argument
c) add a new argument telling the function if the message was
transferred. This allows the function to be used also in cases
where setting up DMA failed, so the buffer needs to be freed without
syncing to the message buffer.
Also convert the only user.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
|
|
Pull block fixes from Jens Axboe:
"Small collection of fixes that should go into this series. This pull
contains:
- NVMe pull request with three small fixes (via Christoph)
- Kill useless NULL check before kmem_cache_destroy (Chengguang Xu)
- Xen block driver pull request with persistent grant flushing fixes
(Juergen Gross)
- Final wbt fixes, wrapping up the changes for this series. These
have been heavily tested (me)
- cdrom info leak fix (Scott Bauer)
- ATA dma quirk for SQ201 (Linus Walleij)
- Straight forward bsg refcount_t conversion (John Pittman)"
* tag 'for-linus-20180830' of git://git.kernel.dk/linux-block:
cdrom: Fix info leak/OOB read in cdrom_ioctl_drive_status
nvmet: free workqueue object if module init fails
nvme-fcloop: Fix dropped LS's to removed target port
nvme-pci: add a memory barrier to nvme_dbbuf_update_and_check_event
block: bsg: move atomic_t ref_count variable to refcount API
block: remove unnecessary condition check
ata: ftide010: Add a quirk for SQ201
blk-wbt: remove dead code
blk-wbt: improve waking of tasks
blk-wbt: abstract out end IO completion handler
xen/blkback: remove unused pers_gnts_lock from struct xen_blkif_ring
xen/blkback: move persistent grants flags to bool
xen/blkfront: reorder tests in xlblk_init()
xen/blkfront: cleanup stale persistent grants
xen/blkback: don't keep persistent grants too long
|
|
This is going to be used by overlayfs and possibly useful
for other filesystems.
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
|
|
...to kernel 4.18.
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/palmer/riscv-linux
Pull RISC-V fixes from Palmer Dabbelt:
"RISC-V Fixes and Cleanups for 4.19-rc2
This contains a handful of patches that filtered their way in during
the merge window but just didn't make the deadline. It includes:
- Additional documentation in the riscv,cpu-intc device tree binding
that resulted from some feedback I missed in the original patch
set.
- A build fix that provides the definition of tlb_flush() before
including tlb.h, which fixes a RISC-V build regression introduced
during this merge window.
- A cosmetic cleanup to sys_riscv_flush_icache()"
* tag 'riscv-for-linus-4.19-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/palmer/riscv-linux:
RISC-V: Use a less ugly workaround for unused variable warnings
riscv: tlb: Provide definition of tlb_flush() before including tlb.h
dt-bindings: riscv,cpu-intc: Cleanups from a missed review
|
|
Add support for the R7S9210 which is part of the RZ/A2 series.
Signed-off-by: Chris Brandt <chris.brandt@renesas.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
RZ/G2M (R8A774A1) watchdog implementation is compatible with R-Car
Gen3, therefore add relevant documentation.
Signed-off-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com>
Reviewed-by: Biju Das <biju.das@bp.renesas.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
|
|
This fixes this warning:
Documentation/media/uapi/dvb/video_function_calls.rst:9: WARNING: toctree contains
reference to nonexisting document 'uapi/dvb/video-set-attributes'
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
|
|
- Fix mismatch between SVE registers (Z) and FPSIMD register (V)
- Don't prefix the path for [3] with Linux to stay consistent with
[1] and [2].
Signed-off-by: Julien Grall <julien.grall@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
|
