Age | Commit message (Collapse) | Author | Files | Lines |
|
Landlock needs to track changes to do_vfs_ioctl() when new IOCTL
implementations are added to it.
Suggested-by: Mickaël Salaün <mic@digikod.net>
Signed-off-by: Günther Noack <gnoack@google.com>
Link: https://lore.kernel.org/r/20240419161122.2023765-11-gnoack@google.com
Signed-off-by: Mickaël Salaün <mic@digikod.net>
|
|
This will add eBPF JIT support to the 32-bit ARCv2 processors. The
implementation is qualified by running the BPF tests on a Synopsys HSDK
board with "ARC HS38 v2.1c at 500 MHz" as the 4-core CPU.
The test_bpf.ko reports 2-10 fold improvements in execution time of its
tests. For instance:
test_bpf: #33 tcpdump port 22 jited:0 704 1766 2104 PASS
test_bpf: #33 tcpdump port 22 jited:1 120 224 260 PASS
test_bpf: #141 ALU_DIV_X: 4294967295 / 4294967295 = 1 jited:0 238 PASS
test_bpf: #141 ALU_DIV_X: 4294967295 / 4294967295 = 1 jited:1 23 PASS
test_bpf: #776 JMP32_JGE_K: all ... magnitudes jited:0 2034681 PASS
test_bpf: #776 JMP32_JGE_K: all ... magnitudes jited:1 1020022 PASS
Deployment and structure
------------------------
The related codes are added to "arch/arc/net":
- bpf_jit.h -- The interface that a back-end translator must provide
- bpf_jit_core.c -- Knows how to handle the input eBPF byte stream
- bpf_jit_arcv2.c -- The back-end code that knows the translation logic
The bpf_int_jit_compile() at the end of bpf_jit_core.c is the entrance
to the whole process. Normally, the translation is done in one pass,
namely the "normal pass". In case some relocations are not known during
this pass, some data (arc_jit_data) is allocated for the next pass to
come. This possible next (and last) pass is called the "extra pass".
1. Normal pass # The necessary pass
1a. Dry run # Get the whole JIT length, epilogue offset, etc.
1b. Emit phase # Allocate memory and start emitting instructions
2. Extra pass # Only needed if there are relocations to be fixed
2a. Patch relocations
Support status
--------------
The JIT compiler supports BPF instructions up to "cpu=v4". However, it
does not yet provide support for:
- Tail calls
- Atomic operations
- 64-bit division/remainder
- BPF_PROBE_MEM* (exception table)
The result of "test_bpf" test suite on an HSDK board is:
hsdk-lnx# insmod test_bpf.ko test_suite=test_bpf
test_bpf: Summary: 863 PASSED, 186 FAILED, [851/851 JIT'ed]
All the failing test cases are due to the ones that were not JIT'ed.
Categorically, they can be represented as:
.-----------.------------.-------------.
| test type | opcodes | # of cases |
|-----------+------------+-------------|
| atomic | 0xC3, 0xDB | 149 |
| div64 | 0x37, 0x3F | 22 |
| mod64 | 0x97, 0x9F | 15 |
`-----------^------------+-------------|
| (total) 186 |
`-------------'
Setup: build config
-------------------
The following configs must be set to have a working JIT test:
CONFIG_BPF_JIT=y
CONFIG_BPF_JIT_ALWAYS_ON=y
CONFIG_TEST_BPF=m
The following options are not necessary for the tests module,
but are good to have:
CONFIG_DEBUG_INFO=y # prerequisite for below
CONFIG_DEBUG_INFO_BTF=y # so bpftool can generate vmlinux.h
CONFIG_FTRACE=y #
CONFIG_BPF_SYSCALL=y # all these options lead to
CONFIG_KPROBE_EVENTS=y # having CONFIG_BPF_EVENTS=y
CONFIG_PERF_EVENTS=y #
Some BPF programs provide data through /sys/kernel/debug:
CONFIG_DEBUG_FS=y
arc# mount -t debugfs debugfs /sys/kernel/debug
Setup: elfutils
---------------
The libdw.{so,a} library that is used by pahole for processing
the final binary must come from elfutils 0.189 or newer. The
support for ARCv2 [1] has been added since that version.
[1]
https://sourceware.org/git/?p=elfutils.git;a=commit;h=de3d46b3e7
Setup: pahole
-------------
The line below in linux/scripts/Makefile.btf must be commented out:
pahole-flags-$(call test-ge, $(pahole-ver), 121) += --btf_gen_floats
Or else, the build will fail:
$ make V=1
...
BTF .btf.vmlinux.bin.o
pahole -J --btf_gen_floats \
-j --lang_exclude=rust \
--skip_encoding_btf_inconsistent_proto \
--btf_gen_optimized .tmp_vmlinux.btf
Complex, interval and imaginary float types are not supported
Encountered error while encoding BTF.
...
BTFIDS vmlinux
./tools/bpf/resolve_btfids/resolve_btfids vmlinux
libbpf: failed to find '.BTF' ELF section in vmlinux
FAILED: load BTF from vmlinux: No data available
This is due to the fact that the ARC toolchains generate
"complex float" DIE entries in libgcc and at the moment, pahole
can't handle such entries.
Running the tests
-----------------
host$ scp /bld/linux/lib/test_bpf.ko arc:
arc # sysctl net.core.bpf_jit_enable=1
arc # insmod test_bpf.ko test_suite=test_bpf
...
test_bpf: #1048 Staggered jumps: JMP32_JSLE_X jited:1 697811 PASS
test_bpf: Summary: 863 PASSED, 186 FAILED, [851/851 JIT'ed]
Acknowledgments
---------------
- Claudiu Zissulescu for his unwavering support
- Yuriy Kolerov for testing and troubleshooting
- Vladimir Isaev for the pahole workaround
- Sergey Matyukevich for paving the road by adding the interpreter support
Signed-off-by: Shahab Vahedi <shahab@synopsys.com>
Link: https://lore.kernel.org/r/20240430145604.38592-1-list+bpf@vahedi.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull MM fixes from Andrew Morton:
"18 hotfixes, 7 of which are cc:stable.
More fixups for this cycle's page_owner updates. And a few userfaultfd
fixes. Otherwise, random singletons - see the individual changelogs
for details"
* tag 'mm-hotfixes-stable-2024-05-10-13-14' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
mailmap: add entry for Barry Song
selftests/mm: fix powerpc ARCH check
mailmap: add entry for John Garry
XArray: set the marks correctly when splitting an entry
selftests/vDSO: fix runtime errors on LoongArch
selftests/vDSO: fix building errors on LoongArch
mm,page_owner: don't remove __GFP_NOLOCKDEP in add_stack_record_to_list
fs/proc/task_mmu: fix uffd-wp confusion in pagemap_scan_pmd_entry()
fs/proc/task_mmu: fix loss of young/dirty bits during pagemap scan
mm/vmalloc: fix return value of vb_alloc if size is 0
mm: use memalloc_nofs_save() in page_cache_ra_order()
kmsan: compiler_types: declare __no_sanitize_or_inline
lib/test_xarray.c: fix error assumptions on check_xa_multi_store_adv_add()
tools: fix userspace compilation with new test_xarray changes
MAINTAINERS: update URL's for KEYS/KEYRINGS_INTEGRITY and TPM DEVICE DRIVER
mm: page_owner: fix wrong information in dump_page_owner
maple_tree: fix mas_empty_area_rev() null pointer dereference
mm/userfaultfd: reset ptes when close() for wr-protected ones
|
|
We want the USB fixes in here as well, and resolve a merge conflict in
drivers/usb/dwc3/core.c
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
https://gitlab.freedesktop.org/drm/msm into drm-next
Updates for v6.10
Core:
- Switched to generating register header files during build process
instead of shipping pre-generated headers
- Merged DPU and MDP4 format databases.
DP:
- Stop using compat string to distinguish DP and eDP cases
- Added support for X Elite platform (X1E80100)
- Reworked DP aux/audio support
- Added SM6350 DP to the bindings (no driver changes, using SM8350
as a fallback compat)
GPU:
- a7xx perfcntr reg fixes
- MAINTAINERS updates
- a750 devcoredump support
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Rob Clark <robdclark@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/CAF6AEGtpw6dNR9JBikFTQ=TCpt-9FeFW+SGjXWv+Jv3emm0Pbg@mail.gmail.com
|
|
The MAINTAINERS file entry for the bcm2835-unicam driver incorrectly
references the non-existing drivers/media/platform/bcm2835/ path. Fix
it.
Fixes: 392cd78d495f ("media: bcm2835-unicam: Add support for CCP2/CSI2 camera interface")
Reviewed-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Link: https://lore.kernel.org/r/20240501115439.9789-1-laurent.pinchart@ideasonboard.com
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Cross-merge networking fixes after downstream PR.
No conflicts.
Adjacent changes:
drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c
35d92abfbad8 ("net: hns3: fix kernel crash when devlink reload during initialization")
2a1a1a7b5fd7 ("net: hns3: add command queue trace for hns3")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This covers trusted keys backed by NXP's DCP (Data Co-Processor) chip
found in smaller i.MX SoCs.
Signed-off-by: David Gstir <david@sigma-star.at>
Acked-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
|
|
We need the char-misc changes in here as well.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Commit 67889688e05b ("MAINTAINERS: update the LSM file list") adds a few
file entries to lsm-related header files. Among them, there is a reference
to include/security.h. However, security.h is located in include/linux/,
not in include/.
Hence, ./scripts/get_maintainer.pl --self-test=patterns complains about a
broken reference.
Repair this new file entry in the SECURITY SUBSYSTEM section.
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@redhat.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
|
|
Commit a403997c1201 ("spi: airoha: add SPI-NAND Flash controller driver")
adds a new section AIROHA SPI SNFI DRIVER referring to the file
spi-airoha.c. The commit however adds the file spi-airoha-snfi.c.
Hence, ./scripts/get_maintainer.pl --self-test=patterns complains about a
broken reference.
Repair this file entry in the AIROHA SPI SNFI DRIVER section.
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@redhat.com>
Link: https://lore.kernel.org/r/20240507141449.177538-1-lukas.bulwahn@redhat.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/andy/linux-gpio-intel into gpio/for-next
intel-gpio for v6.10-1
* New driver for vGPIO controller on Intel Granite Rapids-D
* Update ACPI GPIO library to unify the IRQ code path
* Better GPIO IRQ line labeling for ACPI
* Switched Intel SCH driver to use "mapped" I/O accessors
The following is an automated git shortlog grouped by driver:
Add Intel Granite Rapids-D vGPIO driver:
- Add Intel Granite Rapids-D vGPIO driver
crystalcove:
- Use -ENOTSUPP consistently
gpiolib:
- acpi: Set label for IRQ only lines
- acpi: Add fwnode name to the GPIO interrupt label
- acpi: Pass con_id instead of property into acpi_dev_gpio_irq_get_by()
- acpi: Move acpi_can_fallback_to_crs() out of __acpi_find_gpio()
- acpi: Simplify error handling in __acpi_find_gpio()
- acpi: Extract __acpi_find_gpio() helper
- acpi: Check for errors first in acpi_find_gpio()
- acpi: Remove never true check in acpi_get_gpiod_by_index()
sch:
- Utilise temporary variable for struct device
- Switch to memory mapped IO accessors
wcove:
- Use -ENOTSUPP consistently
|
|
Add TPM driver test suite URL to the MAINTAINERS files and move the wiki
URL to more appropriate location.
Link: https://gitlab.com/jarkkojs/linux-tpmdd-test
Link: https://kernsec.org/wiki/index.php/Linux_Kernel_Integrity
Link: https://lkml.kernel.org/r/20240423214549.8242-1-jarkko@kernel.org
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
Acked-by: Paul Menzel <pmenzel@molgen.mpg.de>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: Mimi Zohar <zohar@linux.ibm.com>
Cc: Peter Huewe <peterhuewe@gmx.de>
Cc: James Bottomley <James.Bottomley@HansenPartnership.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Add Zhaoxin I2C controller driver. It provides the access to the i2c
busses, which connects to the touchpad, eeprom, I2S, etc.
Zhaoxin I2C controller has two separate busses, so may accommodate up
to two I2C adapters. Those adapters are listed in the ACPI namespace
with the IIC1D17 HID, and probed by a platform driver.
The driver works with IRQ mode, and supports basic I2C features. Flags
I2C_AQ_NO_ZERO_LEN and I2C_AQ_COMB_WRITE_THEN_READ are used to limit
the unsupported access.
Acked-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Hans Hu <hanshu-oc@zhaoxin.com>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
|
|
Since the I2C IP of both wmt and zhaoxin originates from VIA,
it is better to separate the common code first.
The common driver is named as i2c-viai2c-common.c.
Old i2c-wmt.c renamed to i2c-viai2c-wmt.c.
The MAINTAINERS file will be updated accordingly in upcoming commits.
Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Hans Hu <hanshu-oc@zhaoxin.com>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
|
|
Commit 51c87f0e6cca ("dt-bindings: i2c: nxp,pnx-i2c: Convert to dtschema")
converts i2c-pnx.txt to nxp,pnx-i2c.yaml, but misses to adjust the file
entry in ARM/LPC32XX SOC SUPPORT.
Hence, ./scripts/get_maintainer.pl --self-test=patterns complains about a
broken reference.
Adjust the file entry in ARM/LPC32XX SOC SUPPORT after this conversion.
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@redhat.com>
Reviewed-by: Andi Shyti <andi.shyti@kernel.org>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
|
|
Add myself as a reviewer for Adreno driver changes.
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/590705/
Signed-off-by: Rob Clark <robdclark@chromium.org>
|
|
The msm driver is.. gigantic and covers display hardware (incl. things
concerning (e)DP, DSI, HDMI), as well as the entire lineup of Adreno
GPUs (with hw bringup, memory mappings, userspace interaction etc.).
Because of that, people listed as M:/R: receive patches concerning
drivers for any part of the display block OR the GPU. Separate the
latter, as it's both a functionally separate block and is of
interest to different folks.
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/590704/
Signed-off-by: Rob Clark <robdclark@chromium.org>
|
|
ARM/VT8500 is marked as Orphan. It includes ehci-platform.c and
uhci-platform.c in its file list, even though uhci-platform.c is included
from uhci-hcd.c and ehci-platform.c is used by several platforms.
Listing those files as part of an orphan platform does not add value,
even more so since they are marked as supported as part of generic ehci
and uhci support. Drop the files from the ARM/VT8500 entry.
Cc: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20240504141436.647782-1-linux@roeck-us.net
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Move Dave Jiang to reviewer role since he has not been working on the
driver.
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Signed-off-by: Fenghua Yu <fenghua.yu@intel.com>
Link: https://lore.kernel.org/r/20240415182055.3465170-1-fenghua.yu@intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Add myself(Bharat) as maintainer for cxgb4 and cxgb3 network drivers.
Signed-off-by: Potnuri Bharat Teja <bharat@chelsio.com>
Link: https://lore.kernel.org/r/20240502184209.2723379-1-bharat@chelsio.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/coresight/linux into char-misc-next
Suzuki writes:
coresight: hwtracing subsystem updates for v6.10
CoreSight/hwtracing updates for the next release includes:
- ACPI power management support for CoreSight legacy components, via migration
from AMBA to platform device
- Fixes for ETE register save/restore during CPU Idle.
- ACPI support TMC for Scatter-Gather mode.
- his_ptt driver update to set the parent device for PMU and documentation fixes
- Qcomm Trace component DT binding fixes
- Miscellaneous cleanups
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
* tag 'coresight-next-v6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/coresight/linux: (28 commits)
hwtracing: hisi_ptt: Assign parent for event_source device
Documentation: ABI + trace: hisi_ptt: update paths to bus/event_source
coresight: tmc: Enable SG capability on ACPI based SoC-400 TMC ETR devices
coresight: Docs/ABI/testing/sysfs-bus-coresight-devices: Fix spelling errors
coresight: tpiu: Convert to platform remove callback returning void
coresight: tmc: Convert to platform remove callback returning void
coresight: stm: Convert to platform remove callback returning void
coresight: debug: Convert to platform remove callback returning void
coresight: catu: Convert to platform remove callback returning void
coresight: Remove duplicate linux/amba/bus.h header
coresight: stm: Remove duplicate linux/acpi.h header
coresight: etm4x: Fix access to resource selector registers
coresight: etm4x: Safe access for TRCQCLTR
coresight: etm4x: Do not save/restore Data trace control registers
coresight: etm4x: Do not hardcode IOMEM access for register restore
coresight: debug: Move ACPI support from AMBA driver to platform driver
coresight: stm: Move ACPI support from AMBA driver to platform driver
coresight: tmc: Move ACPI support from AMBA driver to platform driver
coresight: tpiu: Move ACPI support from AMBA driver to platform driver
coresight: catu: Move ACPI support from AMBA driver to platform driver
...
|
|
Cross-merge networking fixes after downstream PR.
Conflicts:
include/linux/filter.h
kernel/bpf/core.c
66e13b615a0c ("bpf: verifier: prevent userspace memory access")
d503a04f8bc0 ("bpf: Add support for certain atomics in bpf_arena to x86 JIT")
https://lore.kernel.org/all/20240429114939.210328b0@canb.auug.org.au/
No adjacent changes.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Paolo Abeni:
"Including fixes from bpf.
Relatively calm week, likely due to public holiday in most places. No
known outstanding regressions.
Current release - regressions:
- rxrpc: fix wrong alignmask in __page_frag_alloc_align()
- eth: e1000e: change usleep_range to udelay in PHY mdic access
Previous releases - regressions:
- gro: fix udp bad offset in socket lookup
- bpf: fix incorrect runtime stat for arm64
- tipc: fix UAF in error path
- netfs: fix a potential infinite loop in extract_user_to_sg()
- eth: ice: ensure the copied buf is NUL terminated
- eth: qeth: fix kernel panic after setting hsuid
Previous releases - always broken:
- bpf:
- verifier: prevent userspace memory access
- xdp: use flags field to disambiguate broadcast redirect
- bridge: fix multicast-to-unicast with fraglist GSO
- mptcp: ensure snd_nxt is properly initialized on connect
- nsh: fix outer header access in nsh_gso_segment().
- eth: bcmgenet: fix racing registers access
- eth: vxlan: fix stats counters.
Misc:
- a bunch of MAINTAINERS file updates"
* tag 'net-6.9-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (45 commits)
MAINTAINERS: mark MYRICOM MYRI-10G as Orphan
MAINTAINERS: remove Ariel Elior
net: gro: add flush check in udp_gro_receive_segment
net: gro: fix udp bad offset in socket lookup by adding {inner_}network_offset to napi_gro_cb
ipv4: Fix uninit-value access in __ip_make_skb()
s390/qeth: Fix kernel panic after setting hsuid
vxlan: Pull inner IP header in vxlan_rcv().
tipc: fix a possible memleak in tipc_buf_append
tipc: fix UAF in error path
rxrpc: Clients must accept conn from any address
net: core: reject skb_copy(_expand) for fraglist GSO skbs
net: bridge: fix multicast-to-unicast with fraglist GSO
mptcp: ensure snd_nxt is properly initialized on connect
e1000e: change usleep_range to udelay in PHY mdic access
net: dsa: mv88e6xxx: Fix number of databases for 88E6141 / 88E6341
cxgb4: Properly lock TX queue for the selftest.
rxrpc: Fix using alignmask being zero for __page_frag_alloc_align()
vxlan: Add missing VNI filter counter update in arp_reduce().
vxlan: Fix racy device stats updates.
net: qede: use return from qede_parse_actions()
...
|
|
To allow for assigning a suitable parent to the struct pmu device
update the documentation to describe the device via the event_source
bus where it will remain accessible.
For the ABI documention file also rename the file as it is named
after the path.
Reviewed-by: Yicong Yang <yangyicong@hisilicon.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20240412161057.14099-30-Jonathan.Cameron@huawei.com
|
|
Chris's email address bounces and lore hasn't seen an email
from anyone with his name for almost a decade.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20240430233532.1356982-1-kuba@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
aelior@marvell.com bounces, we haven't seen Ariel on lore
since March 2022.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Link: https://lore.kernel.org/r/20240430233305.1356105-1-kuba@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
The LSM entry was missing a number of files under include/.
Signed-off-by: Paul Moore <paul@paul-moore.com>
|
|
Aneesh's IBM address no longer works, switch to his preferred kernel.org
address.
Acked-by: Aneesh Kumar K.V (Arm) <aneesh.kumar@kernel.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20240430044327.49363-1-mpe@ellerman.id.au
|
|
Aneesh is stepping down from powerpc maintenance.
Acked-by: Aneesh Kumar K.V (Arm) <aneesh.kumar@kernel.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20240430044228.49015-1-mpe@ellerman.id.au
|
|
Commit 12fb28ea6b1c ("EINJ: Add CXL error type support") adds the header
file include/linux/einj-cxl.h, but then adds a file entry with cxl-einj.h
(note the swapping of words) to the COMPUTE EXPRESS LINK (CXL) section.
Hence, ./scripts/get_maintainer.pl --self-test=patterns complains about a
broken reference.
get_maintainer.pl can only return commit_signer history for file
include/linux/einj-cxl.h because the entry in MAINTAINERS is wrong.
Correct the entry so that the full MAINTAINER list is returned.
Repair the file entry in COMPUTE EXPRESS LINK (CXL).
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@redhat.com>
Reviewed-by: Alison Schofield <alison.schofield@intel.com>
Link: https://lore.kernel.org/r/20240411062443.47372-1-lukas.bulwahn@redhat.com
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
|
|
Merge series from Luca Ceresoli <luca.ceresoli@bootlin.com>:
This series applies various improvements to the DAPM documentation: a
rewrite of a few sections for clarity, style improvements and typo fixes.
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
---
Changes in v2:
- avoid wrapping in patch 3 as suggested by Alex
- Link to v1: https://lore.kernel.org/r/20240416-dapm-docs-v1-0-a818d2819bf6@bootlin.com
---
Luca Ceresoli (12):
ASoC: doc: dapm: fix typos
ASoC: doc: dapm: fix struct name
ASoC: doc: dapm: minor rewording
ASoC: doc: dapm: remove dash after colon
ASoC: doc: dapm: clarify it's an internal API
ASoC: doc: dapm: replace "map" with "graph"
ASoC: doc: dapm: extend initial descrption
ASoC: doc: dapm: describe how widgets and routes are registered
ASoC: doc: dapm: fix and improve section "Registering DAPM controls"
ASoC: doc: dapm: improve section "Codec/DSP Widget Interconnections"
ASoC: doc: dapm: update section "DAPM Widget Events"
ASoC: doc: dapm: update event types
Documentation/sound/soc/dapm-graph.svg | 375 +++++++++++++++++++++++++++++++++
Documentation/sound/soc/dapm.rst | 174 ++++++++++-----
2 files changed, 492 insertions(+), 57 deletions(-)
---
base-commit: c942a0cd3603e34dd2d7237e064d9318cb7f9654
change-id: 20240315-dapm-docs-79bd51f267db
Best regards,
--
Luca Ceresoli <luca.ceresoli@bootlin.com>
|
|
Introduce support for SPI-NAND driver of the Airoha NAND Flash Interface
found on Airoha ARM SoCs.
Tested-by: Rajeev Kumar <Rajeev.Kumar@airoha.com>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/6c9db20505b01a66807995374f2af475a23ce5b2.1714377864.git.lorenzo@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
I'm happy to add Gautham and Mario as the co-maintainers, Perry as the
reviewer for amd-pstate driver.
Signed-off-by: Huang Rui <ray.huang@amd.com>
Acked-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux into soc/drivers
Arm SCMI updates for v6.10
1. Basic support for SCMI v3.2 pincontrol protocol
SCMI v3.2 introduces pincontrol protocol which is intended for
controlling pins and their configuration. The pin control protocol
provides commands to:
- List the pins, groups of pins, available functions, and their
association with each other.
- Set the parameter configuration and multiplexing of the pins or
groups of pins
- Optionally request exclusive access to a pin or group of pins.
- Optionally configure the permissions of an agent to access a pin
or group of pins.
These changes adds basic support for the same in the SCMI core layer
and an implementation of the generic scmi-pinctrl driver with associated
DT bindings.
2. Framework support for multiple vendors custom protocols
With the fixed space for vendor protocols, the possibility of having
multiple vendors implementing distinct SCMI vendor protocols with
the same overlapping protocol number is very high and with the need
to support them all in a single kernel image or a module is also high.
In order to implement the same we assume:
- vendor protocols has to be tagged at build time with a vendor_id
- vendor protocols could also optionally be tagged at build time with
sub_vendor_id and implementation version
At the initialisation all the built vendor protocols are registered
with the SCMI core using a key derived from the above tags
3. Logging and tracing improvements
This includes using dev_err_probe() to bail out from probe, adding
message dump traces for bad and unexpected replies and widening of
the tag buffer in trace_scmi_dump_msg to allow diverse tag names
4. Miscellaneous updates or improvements
This includes adding the accessor function get_max_msg_size() used
in pinctl protocol, updation of dt-bindings examples for protocol@13
to promote new bindings and simplification of scmi_devm_notifier_unregister
* tag 'scmi-updates-6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux:
pinctrl: Implementation of the generic scmi-pinctrl driver
firmware: arm_scmi: Add basic support for SCMI v3.2 pincontrol protocol
dt-bindings: firmware: Support SCMI pinctrl protocol
firmware: arm_scmi: Introduce get_max_msg_size() helper/accessor
firmware: arm_scmi: Add support for multiple vendors custom protocols
dt-bindings: firmware: arm,scmi: Update examples for protocol@13
firmware: arm_scmi: Avoid non-constant printk format strings
firmware: arm_scmi: Use dev_err_probe to bail out
firmware: arm_scmi: Simplify scmi_devm_notifier_unregister
firmware: arm_scmi: Add message dump traces for bad and unexpected replies
firmware: arm_scmi: Add helper to trace bad messages
include: trace: Widen the tag buffer in trace_scmi_dump_msg
firmware: arm_scmi: Log the perf domain names in the error paths
Link: https://lore.kernel.org/r/20240426105031.1526987-1-sudeep.holla@arm.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.linaro.org/people/jens.wiklander/linux-tee into soc/drivers
TEE driver for Trusted Services
This introduces a TEE driver for Trusted Services [1].
Trusted Services is a TrustedFirmware.org project that provides a
framework for developing and deploying device Root of Trust services in
FF-A [2] Secure Partitions. The project hosts the reference
implementation of Arm Platform Security Architecture [3] for Arm
A-profile devices.
The FF-A Secure Partitions are accessible through the FF-A driver in
Linux. However, the FF-A driver doesn't have a user space interface so
user space clients currently cannot access Trusted Services. The goal of
this TEE driver is to bridge this gap and make Trusted Services
functionality accessible from user space.
[1] https://www.trustedfirmware.org/projects/trusted-services/
[2] https://developer.arm.com/documentation/den0077/
[3] https://www.arm.com/architecture/security-features/platform-security
* tag 'tee-ts-for-v6.10' of https://git.linaro.org/people/jens.wiklander/linux-tee:
MAINTAINERS: tee: tstee: Add entry
Documentation: tee: Add TS-TEE driver
tee: tstee: Add Trusted Services TEE driver
tee: optee: Move pool_op helper functions
tee: Refactor TEE subsystem header files
Link: https://lore.kernel.org/r/20240425073119.GA3261080@rayden
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into soc/drivers
Qualcomm driver updates for v6.10
The Qualcomm SCM driver initialization order is improved, to avoid any
potential for a client to find a half-initialized SCM instance.
The handling of download mode bits is updated to not attempt
QCOM_SCM_BOOT_SET_DLOAD_MODE if a io-address for the update is
specified, and that path is changed to perform a read-modify-write to
avoid updating unrelated bits. Error handling is corrected in the
peripheral authentication service (PAS) functions, to release
interconnect bandwidth votes in the case of an error. An unwanted error
print on allocation error is also removed from this code path.
The QSEECOM allow list is marked __maybe_unused to avoid build warnings
when built with !OF. The error handling related to the interconnect API
is cleaned up to avoid handling the impossible IS_ERR() condition.
initcall level is bumped to "core" for cmd-db and rpmh-rsc, as dependent
drivers like regulators, interconnects and clocks are registered at this
level.
Another attempt is made to remove the strncpy() usage in cmd-db, this
time with strtomem_pad() which has the correct characteristics.
The bwmon regmap cache is changed to maple tree.
After an attempt to add missing MODULE_DEVICE_TABLEs to debug drivers,
the intention of not having them automatically load is documented.
Operations on the pmic_glink client list is put under mutual exclusion,
to avoid races when clients are being registered. pmic_glink client
registered after the firmware notification arrived was not informed that
the firmware was up, this is resolved.
More DSPs and the apss subsystem is added to the Qualcomm sleep stats driver.
Checks for in-flight regulator requests in the RPMh RSC driver is
improved to deal with the fact that these occupy multiple registers, so
it's insufficient to just to direct address comparison.
The socinfo drivers learns about X1 Elite and SMB2360 PMIC.
The maintainers entry is split between the linux-arm-msm list and
subset that is maintained in the qcom-soc tree, to avoid some confusion
about maintainership.
* tag 'qcom-drivers-for-6.10' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (21 commits)
soc: qcom: cmd-db: replace deprecated strncpy with strtomem
soc: qcom: rpmh-rsc: Enhance check for VRM in-flight request
firmware: qcom: scm: Modify only the download bits in TCSR register
firmware: qcom: scm: Fix __scm and waitq completion variable initialization
firmware: qcom: scm: Rework dload mode availability check
firmware: qcom: scm: Remove redundant scm argument from qcom_scm_waitq_wakeup()
firmware: qcom: scm: Remove log reporting memory allocation failure
soc: qcom: pmic_glink: notify clients about the current state
soc: qcom: pmic_glink: don't traverse clients list without a lock
soc: qcom: mention intentionally broken module autoloading
firmware: qcom: qcm: fix unused qcom_scm_qseecom_allowlist
MAINTAINERS: Split Qualcomm SoC and linux-arm-msm entries
soc: qcom: qcom_stats: Add DSPs and apss subsystem stats
dt-bindings: soc: qcom: qcom,pmic-glink: document QCM6490 compatible
soc: qcom: socinfo: Add SMB2360 PMIC
soc: qcom: socinfo: Add X1E80100 SoC ID table entry
dt-bindings: arm: qcom,ids: Add SoC ID for X1E80100
soc: qcom: Update init level to core_initcall() for cmd-db and rpmh-rsc
soc: qcom: icc-bwmon: Convert to use maple tree register cache
firmware: qcom_scm: remove IS_ERR() checks from qcom_scm_bw_{en,dis}able()
...
Link: https://lore.kernel.org/r/20240427160917.1431354-1-andersson@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32 into soc/drivers
STM32 Firewall bus for v6.10, round 1
Highlights:
---------
Introduce STM32 Firewall framework for STM32MP1x and STM32MP2x
platforms. STM32MP1x(ETZPC) and STM32MP2x(RIFSC) Firewall controllers
register to the framework to offer firewall services such as access
granting.
This series of patches is a new approach on the previous STM32 system
bus, history is available here:
https://lore.kernel.org/lkml/20230127164040.1047583/
The need for such framework arises from the fact that there are now
multiple hardware firewalls implemented across multiple products.
Drivers are shared between different products, using the same code.
When it comes to firewalls, the purpose mostly stays the same: Protect
hardware resources. But the implementation differs, and there are
multiple types of firewalls: peripheral, memory, ...
Some hardware firewall controllers such as the RIFSC implemented on
STM32MP2x platforms may require to take ownership of a resource before
being able to use it, hence the requirement for firewall services to
take/release the ownership of such resources.
On the other hand, hardware firewall configurations are becoming
more and more complex. These mecanisms prevent platform crashes
or other firewall-related incoveniences by denying access to some
resources.
The stm32 firewall framework offers an API that is defined in
firewall controllers drivers to best fit the specificity of each
firewall.
For every peripherals protected by either the ETZPC or the RIFSC, the
firewall framework checks the firewall controlelr registers to see if
the peripheral's access is granted to the Linux kernel. If not, the
peripheral is configured as secure, the node is marked populated,
so that the driver is not probed for that device.
The firewall framework relies on the access-controller device tree
binding. It is used by peripherals to reference a domain access
controller. In this case a firewall controller. The bus uses the ID
referenced by the access-controller property to know where to look
in the firewall to get the security configuration for the peripheral.
This allows a device tree description rather than a hardcoded peripheral
table in the bus driver.
The STM32 ETZPC device is responsible for filtering accesses based on
security level, or co-processor isolation for any resource connected
to it.
The RIFSC is responsible for filtering accesses based on Compartment
ID / security level / privilege level for any resource connected to
it.
* tag 'stm32-bus-firewall-for-v6.10-1' of git://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32:
bus: stm32_firewall: fix off by one in stm32_firewall_get_firewall()
bus: etzpc: introduce ETZPC firewall controller driver
bus: rifsc: introduce RIFSC firewall controller driver
of: property: fw_devlink: Add support for "access-controller"
firewall: introduce stm32_firewall framework
dt-bindings: bus: document ETZPC
dt-bindings: bus: document RIFSC
dt-bindings: treewide: add access-controllers description
dt-bindings: document generic access controllers
Link: https://lore.kernel.org/r/7dc64226-5429-4ab7-a8c8-6053b12e3cf5@foss.st.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next
Daniel Borkmann says:
====================
pull-request: bpf-next 2024-04-29
We've added 147 non-merge commits during the last 32 day(s) which contain
a total of 158 files changed, 9400 insertions(+), 2213 deletions(-).
The main changes are:
1) Add an internal-only BPF per-CPU instruction for resolving per-CPU
memory addresses and implement support in x86 BPF JIT. This allows
inlining per-CPU array and hashmap lookups
and the bpf_get_smp_processor_id() helper, from Andrii Nakryiko.
2) Add BPF link support for sk_msg and sk_skb programs, from Yonghong Song.
3) Optimize x86 BPF JIT's emit_mov_imm64, and add support for various
atomics in bpf_arena which can be JITed as a single x86 instruction,
from Alexei Starovoitov.
4) Add support for passing mark with bpf_fib_lookup helper,
from Anton Protopopov.
5) Add a new bpf_wq API for deferring events and refactor sleepable
bpf_timer code to keep common code where possible,
from Benjamin Tissoires.
6) Fix BPF_PROG_TEST_RUN infra with regards to bpf_dummy_struct_ops programs
to check when NULL is passed for non-NULLable parameters,
from Eduard Zingerman.
7) Harden the BPF verifier's and/or/xor value tracking,
from Harishankar Vishwanathan.
8) Introduce crypto kfuncs to make BPF programs able to utilize the kernel
crypto subsystem, from Vadim Fedorenko.
9) Various improvements to the BPF instruction set standardization doc,
from Dave Thaler.
10) Extend libbpf APIs to partially consume items from the BPF ringbuffer,
from Andrea Righi.
11) Bigger batch of BPF selftests refactoring to use common network helpers
and to drop duplicate code, from Geliang Tang.
12) Support bpf_tail_call_static() helper for BPF programs with GCC 13,
from Jose E. Marchesi.
13) Add bpf_preempt_{disable,enable}() kfuncs in order to allow a BPF
program to have code sections where preemption is disabled,
from Kumar Kartikeya Dwivedi.
14) Allow invoking BPF kfuncs from BPF_PROG_TYPE_SYSCALL programs,
from David Vernet.
15) Extend the BPF verifier to allow different input maps for a given
bpf_for_each_map_elem() helper call in a BPF program, from Philo Lu.
16) Add support for PROBE_MEM32 and bpf_addr_space_cast instructions
for riscv64 and arm64 JITs to enable BPF Arena, from Puranjay Mohan.
17) Shut up a false-positive KMSAN splat in interpreter mode by unpoison
the stack memory, from Martin KaFai Lau.
18) Improve xsk selftest coverage with new tests on maximum and minimum
hardware ring size configurations, from Tushar Vyavahare.
19) Various ReST man pages fixes as well as documentation and bash completion
improvements for bpftool, from Rameez Rehman & Quentin Monnet.
20) Fix libbpf with regards to dumping subsequent char arrays,
from Quentin Deslandes.
* tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (147 commits)
bpf, docs: Clarify PC use in instruction-set.rst
bpf_helpers.h: Define bpf_tail_call_static when building with GCC
bpf, docs: Add introduction for use in the ISA Internet Draft
selftests/bpf: extend BPF_SOCK_OPS_RTT_CB test for srtt and mrtt_us
bpf: add mrtt and srtt as BPF_SOCK_OPS_RTT_CB args
selftests/bpf: dummy_st_ops should reject 0 for non-nullable params
bpf: check bpf_dummy_struct_ops program params for test runs
selftests/bpf: do not pass NULL for non-nullable params in dummy_st_ops
selftests/bpf: adjust dummy_st_ops_success to detect additional error
bpf: mark bpf_dummy_struct_ops.test_1 parameter as nullable
selftests/bpf: Add ring_buffer__consume_n test.
bpf: Add bpf_guard_preempt() convenience macro
selftests: bpf: crypto: add benchmark for crypto functions
selftests: bpf: crypto skcipher algo selftests
bpf: crypto: add skcipher to bpf crypto
bpf: make common crypto API for TC/XDP programs
bpf: update the comment for BTF_FIELDS_MAX
selftests/bpf: Fix wq test.
selftests/bpf: Use make_sockaddr in test_sock_addr
selftests/bpf: Use connect_to_addr in test_sock_addr
...
====================
Link: https://lore.kernel.org/r/20240429131657.19423-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add vfio pci variant driver for Intel QAT SR-IOV VF devices. This driver
registers to the vfio subsystem through the interfaces exposed by the
subsystem. It follows the live migration protocol v2 defined in
uapi/linux/vfio.h and interacts with Intel QAT PF driver through a set
of interfaces defined in qat/qat_mig_dev.h to support live migration of
Intel QAT VF devices.
This version only covers migration for Intel QAT GEN4 VF devices.
Co-developed-by: Yahui Cao <yahui.cao@intel.com>
Signed-off-by: Yahui Cao <yahui.cao@intel.com>
Signed-off-by: Xin Zeng <xin.zeng@intel.com>
Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Link: https://lore.kernel.org/r/20240426064051.2859652-1-xin.zeng@intel.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
|
|
Thomas needs the defio fixes, Maíra needs the vkms fixes and Joonas
has some fun with i915-gem conflicts.
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
|
|
Some new SOF changes depend on the fixes there.
|
|
Rename 'ov8856.yaml' as 'ovti,ov8856.yaml' and update the MAINTAINERS
file entry accordingly.
All the Omnivision sensor DT bindings have vendor prefix "ovti," to
their file name hence this renaming.
Link: https://lore.kernel.org/linux-media/20220916110955.23757-1-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
Update MAINTAINERS file for Intel IPU6 input system driver.
Signed-off-by: Bingbu Cao <bingbu.cao@intel.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
|
|
Add a driver for the Unicam camera receiver block on BCM283x processors.
It is represented as two video device nodes: unicam-image and
unicam-embedded which are connected to an internal subdev (named
unicam-subdev) in order to manage streams routing.
Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Co-developed-by: Naushir Patuck <naush@raspberrypi.com>
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Co-developed-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com>
Signed-off-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com>
Co-developed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
[Sakari Ailus: Squash fixes by Laurent.]
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
|
|
Introduce the dt-bindings documentation for bcm2835 CCP2/CSI2 Unicam
camera interface.
Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Co-developed-by: Naushir Patuck <naush@raspberrypi.com>
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Co-developed-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com>
Signed-off-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
|
|
Add a new driver for the MSI WMI Platform interface. The underlying
ACPI WMI interface supports many features, but so far only reading
of fan speed sensors is implemented.
The driver was reverse-engineered based on a user request to the
lm-sensors project, see the github issue for details.
The ACPI WMI interface used by this driver seems to use the same
embedded controller interface as the msi-ec driver, but supports
automatic discovery of supported machines without relying on a
DMI whitelist.
The driver was tested by the user who created the github issue.
Closes: https://github.com/lm-sensors/lm-sensors/issues/475
Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Link: https://lore.kernel.org/r/20240421191145.3189-1-W_Armin@gmx.de
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
Donald has been contributing to YNL a lot. Let's create a dedicated
MAINTAINERS entry and add make his involvement official :)
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Acked-by: Donald Hunter <donald.hunter@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Commit 4e1008d8aae5 ("dt-bindings: hwmon: pmbus: adp1050: add bindings")
adds the ADP1050 HARDWARE MONITOR DRIVER section, but slips in a typo in
its file entry.
Fortunately, ./scripts/get_maintainer.pl --self-test=patterns complains
about this broken reference.
Fix the typo in ADP1050 HARDWARE MONITOR DRIVER maintainer entry.
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Link: https://lore.kernel.org/r/20240402134203.8297-1-lukas.bulwahn@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
Add dt-bindings for adp1050 digital controller for isolated power supply
with pmbus interface voltage, current and temperature monitor.
Signed-off-by: Radu Sabau <radu.sabau@analog.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20240321142201.10330-1-radu.sabau@analog.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|