summaryrefslogtreecommitdiff
path: root/Makefile
AgeCommit message (Collapse)AuthorFilesLines
2018-07-09Linux 4.18-rc4v4.18-rc4Linus Torvalds1-1/+1
2018-07-02Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds1-5/+0
Pull networking fixes from David Miller: 1) Verify netlink attributes properly in nf_queue, from Eric Dumazet. 2) Need to bump memory lock rlimit for test_sockmap bpf test, from Yonghong Song. 3) Fix VLAN handling in lan78xx driver, from Dave Stevenson. 4) Fix uninitialized read in nf_log, from Jann Horn. 5) Fix raw command length parsing in mlx5, from Alex Vesker. 6) Cleanup loopback RDS connections upon netns deletion, from Sowmini Varadhan. 7) Fix regressions in FIB rule matching during create, from Jason A. Donenfeld and Roopa Prabhu. 8) Fix mpls ether type detection in nfp, from Pieter Jansen van Vuuren. 9) More bpfilter build fixes/adjustments from Masahiro Yamada. 10) Fix XDP_{TX,REDIRECT} flushing in various drivers, from Jesper Dangaard Brouer. 11) fib_tests.sh file permissions were broken, from Shuah Khan. 12) Make sure BH/preemption is disabled in data path of mac80211, from Denis Kenzior. 13) Don't ignore nla_parse_nested() return values in nl80211, from Johannes berg. 14) Properly account sock objects ot kmemcg, from Shakeel Butt. 15) Adjustments to setting bpf program permissions to read-only, from Daniel Borkmann. 16) TCP Fast Open key endianness was broken, it always took on the host endiannness. Whoops. Explicitly make it little endian. From Yuching Cheng. 17) Fix prefix route setting for link local addresses in ipv6, from David Ahern. 18) Potential Spectre v1 in zatm driver, from Gustavo A. R. Silva. 19) Various bpf sockmap fixes, from John Fastabend. 20) Use after free for GRO with ESP, from Sabrina Dubroca. 21) Passing bogus flags to crypto_alloc_shash() in ipv6 SR code, from Eric Biggers. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (87 commits) qede: Adverstise software timestamp caps when PHC is not available. qed: Fix use of incorrect size in memcpy call. qed: Fix setting of incorrect eswitch mode. qed: Limit msix vectors in kdump kernel to the minimum required count. ipvlan: call dev_change_flags when ipvlan mode is reset ipv6: sr: fix passing wrong flags to crypto_alloc_shash() net: fix use-after-free in GRO with ESP tcp: prevent bogus FRTO undos with non-SACK flows bpf: sockhash, add release routine bpf: sockhash fix omitted bucket lock in sock_close bpf: sockmap, fix smap_list_map_remove when psock is in many maps bpf: sockmap, fix crash when ipv6 sock is added net: fib_rules: bring back rule_exists to match rule during add hv_netvsc: split sub-channel setup into async and sync net: use dev_change_tx_queue_len() for SIOCSIFTXQLEN atm: zatm: Fix potential Spectre v1 s390/qeth: consistently re-enable device features s390/qeth: don't clobber buffer on async TX completion s390/qeth: avoid using is_multicast_ether_addr_64bits on (u8 *)[6] s390/qeth: fix race when setting MAC address ...
2018-07-02Linux 4.18-rc3v4.18-rc3Linus Torvalds1-1/+1
2018-06-28bpfilter: check compiler capability in KconfigMasahiro Yamada1-5/+0
With the brand-new syntax extension of Kconfig, we can directly check the compiler capability in the configuration phase. If the cc-can-link.sh fails, the BPFILTER_UMH is automatically hidden by the dependency. I also deleted 'default n', which is no-op. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-06-24Linux 4.18-rc2v4.18-rc2Linus Torvalds1-1/+1
2018-06-17Linux 4.18-rc1v4.18-rc1Linus Torvalds1-2/+2
2018-06-14Kbuild: rename CC_STACKPROTECTOR[_STRONG] config variablesLinus Torvalds1-2/+2
The changes to automatically test for working stack protector compiler support in the Kconfig files removed the special STACKPROTECTOR_AUTO option that picked the strongest stack protector that the compiler supported. That was all a nice cleanup - it makes no sense to have the AUTO case now that the Kconfig phase can just determine the compiler support directly. HOWEVER. It also meant that doing "make oldconfig" would now _disable_ the strong stackprotector if you had AUTO enabled, because in a legacy config file, the sane stack protector configuration would look like CONFIG_HAVE_CC_STACKPROTECTOR=y # CONFIG_CC_STACKPROTECTOR_NONE is not set # CONFIG_CC_STACKPROTECTOR_REGULAR is not set # CONFIG_CC_STACKPROTECTOR_STRONG is not set CONFIG_CC_STACKPROTECTOR_AUTO=y and when you ran this through "make oldconfig" with the Kbuild changes, it would ask you about the regular CONFIG_CC_STACKPROTECTOR (that had been renamed from CONFIG_CC_STACKPROTECTOR_REGULAR to just CONFIG_CC_STACKPROTECTOR), but it would think that the STRONG version used to be disabled (because it was really enabled by AUTO), and would disable it in the new config, resulting in: CONFIG_HAVE_CC_STACKPROTECTOR=y CONFIG_CC_HAS_STACKPROTECTOR_NONE=y CONFIG_CC_STACKPROTECTOR=y # CONFIG_CC_STACKPROTECTOR_STRONG is not set CONFIG_CC_HAS_SANE_STACKPROTECTOR=y That's dangerously subtle - people could suddenly find themselves with the weaker stack protector setup without even realizing. The solution here is to just rename not just the old RECULAR stack protector option, but also the strong one. This does that by just removing the CC_ prefix entirely for the user choices, because it really is not about the compiler support (the compiler support now instead automatially impacts _visibility_ of the options to users). This results in "make oldconfig" actually asking the user for their choice, so that we don't have any silent subtle security model changes. The end result would generally look like this: CONFIG_HAVE_CC_STACKPROTECTOR=y CONFIG_CC_HAS_STACKPROTECTOR_NONE=y CONFIG_STACKPROTECTOR=y CONFIG_STACKPROTECTOR_STRONG=y CONFIG_CC_HAS_SANE_STACKPROTECTOR=y where the "CC_" versions really are about internal compiler infrastructure, not the user selections. Acked-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-06-11kcov: test compiler capability in Kconfig and correct dependencyMasahiro Yamada1-1/+1
As Documentation/kbuild/kconfig-language.txt notes, 'select' should be be used with care - it forces a lower limit of another symbol, ignoring the dependency. Currently, KCOV can select GCC_PLUGINS even if arch does not select HAVE_GCC_PLUGINS. This could cause the unmet direct dependency. Now that Kconfig can test compiler capability, let's handle this in a more sophisticated way. There are two ways to enable KCOV; use the compiler that natively supports -fsanitize-coverage=trace-pc, or build the SANCOV plugin if the compiler has ability to build GCC plugins. Hence, the correct dependency for KCOV is: depends on CC_HAS_SANCOV_TRACE_PC || GCC_PLUGINS You do not need to build the SANCOV plugin if the compiler already supports -fsanitize-coverage=trace-pc. Hence, the select should be: select GCC_PLUGIN_SANCOV if !CC_HAS_SANCOV_TRACE_PC With this, GCC_PLUGIN_SANCOV is selected only when necessary, so scripts/Makefile.gcc-plugins can be cleaner. I also cleaned up Kconfig and scripts/Makefile.kcov as well. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: Kees Cook <keescook@chromium.org>
2018-06-08stack-protector: test compiler capability in Kconfig and drop AUTO modeMasahiro Yamada1-87/+6
Move the test for -fstack-protector(-strong) option to Kconfig. If the compiler does not support the option, the corresponding menu is automatically hidden. If STRONG is not supported, it will fall back to REGULAR. If REGULAR is not supported, it will be disabled. This means, AUTO is implicitly handled by the dependency solver of Kconfig, hence removed. I also turned the 'choice' into only two boolean symbols. The use of 'choice' is not a good idea here, because all of all{yes,mod,no}config would choose the first visible value, while we want allnoconfig to disable as many features as possible. X86 has additional shell scripts in case the compiler supports those options, but generates broken code. I added CC_HAS_SANE_STACKPROTECTOR to test this. I had to add -m32 to gcc-x86_32-has-stack-protector.sh to make it work correctly. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Acked-by: Kees Cook <keescook@chromium.org>
2018-06-08kbuild: fix endless syncconfig in case arch Makefile sets CROSS_COMPILEMasahiro Yamada1-24/+30
Commit 21c54b774744 ("kconfig: show compiler version text in the top comment") was intended to detect the compiler upgrade, but Geert reported a breakage on the m68k build. The compiler upgrade is detected by the change of the environment variable, CC_VERSION_TEXT, which contains the first line of the output from $(CC) --version. Currently, this works well when CROSS_COMPILE is given via the environment variable or the Make command line. However, some architectures such as m68k can specify CROSS_COMPILE from arch/$(SRCARCH)/Makefile as well. In this case, "make ARCH=m68k" ends up with endless syncconfig loop. $ make ARCH=m68k defconfig *** Default configuration is based on 'multi_defconfig' # # configuration written to .config # $ make ARCH=m68k scripts/kconfig/conf --syncconfig Kconfig scripts/kconfig/conf --syncconfig Kconfig scripts/kconfig/conf --syncconfig Kconfig scripts/kconfig/conf --syncconfig Kconfig Things are happening like this: Because arch/$(SRCARCH)/Makefile is included after CC_VERSION_TEXT is set, it contains the host compiler version in the defconfig phase. To create or update auto.conf, the following line is triggered: include/config/%.conf: $(KCONFIG_CONFIG) include/config/auto.conf.cmd $(Q)$(MAKE) -f $(srctree)/Makefile syncconfig This recurses the top Makefile after arch/$(SRCARCH)/Makefile is included. CROSS_COMPILE is set to a m68k toolchain prefix and exported to the recursed Make. Then, syncconfig is invoked with the target compiler version in CC_VERSION_TEXT. The Make will restart because auto.conf and auto.conf.cmd have been updated. At this point, CROSS_COMPILE is reset, so CC_VERSION_TEXT is set to the host compiler version again. Then, syncconfig is triggered due to the change of CC_VERSION_TEXT. This loop continues eternally. To fix this problem, $(CC_VERSION_TEXT) must be evaluated only after arch/$(SRCARCH)/Makefile. Setting it earlier is OK as long as it is defined by using the '=' operator instead of ':='. For the defconfig phase, $(CC_VERSION_TEXT) is evaluated when Kbuild descends into scripts/kconfig/, so it contains the target compiler version correctly. include/config/auto.conf.cmd references $(CC_VERSION_TEXT) as well, so it must be included after arch/$(SRCARCH)/Makefile. Fixes: 21c54b774744 ("kconfig: show compiler version text in the top comment") Reported-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Tested-by: Geert Uytterhoeven <geert@linux-m68k.org>
2018-06-07Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-nextLinus Torvalds1-0/+5
Pull networking updates from David Miller: 1) Add Maglev hashing scheduler to IPVS, from Inju Song. 2) Lots of new TC subsystem tests from Roman Mashak. 3) Add TCP zero copy receive and fix delayed acks and autotuning with SO_RCVLOWAT, from Eric Dumazet. 4) Add XDP_REDIRECT support to mlx5 driver, from Jesper Dangaard Brouer. 5) Add ttl inherit support to vxlan, from Hangbin Liu. 6) Properly separate ipv6 routes into their logically independant components. fib6_info for the routing table, and fib6_nh for sets of nexthops, which thus can be shared. From David Ahern. 7) Add bpf_xdp_adjust_tail helper, which can be used to generate ICMP messages from XDP programs. From Nikita V. Shirokov. 8) Lots of long overdue cleanups to the r8169 driver, from Heiner Kallweit. 9) Add BTF ("BPF Type Format"), from Martin KaFai Lau. 10) Add traffic condition monitoring to iwlwifi, from Luca Coelho. 11) Plumb extack down into fib_rules, from Roopa Prabhu. 12) Add Flower classifier offload support to igb, from Vinicius Costa Gomes. 13) Add UDP GSO support, from Willem de Bruijn. 14) Add documentation for eBPF helpers, from Quentin Monnet. 15) Add TLS tx offload to mlx5, from Ilya Lesokhin. 16) Allow applications to be given the number of bytes available to read on a socket via a control message returned from recvmsg(), from Soheil Hassas Yeganeh. 17) Add x86_32 eBPF JIT compiler, from Wang YanQing. 18) Add AF_XDP sockets, with zerocopy support infrastructure as well. From Björn Töpel. 19) Remove indirect load support from all of the BPF JITs and handle these operations in the verifier by translating them into native BPF instead. From Daniel Borkmann. 20) Add GRO support to ipv6 gre tunnels, from Eran Ben Elisha. 21) Allow XDP programs to do lookups in the main kernel routing tables for forwarding. From David Ahern. 22) Allow drivers to store hardware state into an ELF section of kernel dump vmcore files, and use it in cxgb4. From Rahul Lakkireddy. 23) Various RACK and loss detection improvements in TCP, from Yuchung Cheng. 24) Add TCP SACK compression, from Eric Dumazet. 25) Add User Mode Helper support and basic bpfilter infrastructure, from Alexei Starovoitov. 26) Support ports and protocol values in RTM_GETROUTE, from Roopa Prabhu. 27) Support bulking in ->ndo_xdp_xmit() API, from Jesper Dangaard Brouer. 28) Add lots of forwarding selftests, from Petr Machata. 29) Add generic network device failover driver, from Sridhar Samudrala. * ra.kernel.org:/pub/scm/linux/kernel/git/davem/net-next: (1959 commits) strparser: Add __strp_unpause and use it in ktls. rxrpc: Fix terminal retransmission connection ID to include the channel net: hns3: Optimize PF CMDQ interrupt switching process net: hns3: Fix for VF mailbox receiving unknown message net: hns3: Fix for VF mailbox cannot receiving PF response bnx2x: use the right constant Revert "net: sched: cls: Fix offloading when ingress dev is vxlan" net: dsa: b53: Fix for brcm tag issue in Cygnus SoC enic: fix UDP rss bits netdev-FAQ: clarify DaveM's position for stable backports rtnetlink: validate attributes in do_setlink() mlxsw: Add extack messages for port_{un, }split failures netdevsim: Add extack error message for devlink reload devlink: Add extack to reload and port_{un, }split operations net: metrics: add proper netlink validation ipmr: fix error path when ipmr_new_table fails ip6mr: only set ip6mr_table from setsockopt when ip6mr_new_table succeeds net: hns3: remove unused hclgevf_cfg_func_mta_filter netfilter: provide udp*_lib_lookup for nf_tproxy qed*: Utilize FW 8.37.2.0 ...
2018-06-06Merge tag 'kconfig-v4.18' of ↵Linus Torvalds1-6/+4
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild Pull Kconfig updates from Masahiro Yamada: "Kconfig now supports new functionality to perform textual substitution. It has been a while since Linus suggested to move compiler option tests from makefiles to Kconfig. Finally, here it is. The implementation has been generalized into a Make-like macro language. Some built-in functions such as 'shell' are provided. Variables and user-defined functions are also supported so that 'cc-option', 'ld-option', etc. are implemented as macros. Summary: - refactor package checks for building {m,n,q,g}conf - remove unused/unmaintained localization support - remove Kbuild cache - drop CONFIG_CROSS_COMPILE support - replace 'option env=' with direct variable expansion - add built-in functions such as 'shell' - support variables and user-defined functions - add helper macros as as 'cc-option' - add unit tests and a document of the new macro language - add 'testconfig' to help - fix warnings from GCC 8.1" * tag 'kconfig-v4.18' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (30 commits) kconfig: Avoid format overflow warning from GCC 8.1 kbuild: Move last word of nconfig help to the previous line kconfig: Add testconfig into make help output kconfig: add basic helper macros to scripts/Kconfig.include kconfig: show compiler version text in the top comment kconfig: test: add Kconfig macro language tests Documentation: kconfig: document a new Kconfig macro language kconfig: error out if a recursive variable references itself kconfig: add 'filename' and 'lineno' built-in variables kconfig: add 'info', 'warning-if', and 'error-if' built-in functions kconfig: expand lefthand side of assignment statement kconfig: support append assignment operator kconfig: support simply expanded variable kconfig: support user-defined function and recursively expanded variable kconfig: begin PARAM state only when seeing a command keyword kconfig: replace $(UNAME_RELEASE) with function call kconfig: add 'shell' built-in function kconfig: add built-in function support kconfig: make default prompt of mainmenu less specific kconfig: remove sym_expand_string_value() ...
2018-06-06Merge tag 'kbuild-v4.18' of ↵Linus Torvalds1-4/+9
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild Pull Kbuild updates from Masahiro Yamada: - improve fixdep to coalesce consecutive slashes in dep-files - fix some issues of the maintainer string generation in deb-pkg script - remove unused CONFIG_HAVE_UNDERSCORE_SYMBOL_PREFIX and clean-up several tools and linker scripts - clean-up modpost - allow to enable the dead code/data elimination for PowerPC in EXPERT mode - improve two coccinelle scripts for better performance - pass endianness and machine size flags to sparse for all architecture - misc fixes * tag 'kbuild-v4.18' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (25 commits) kbuild: add machine size to CHECKFLAGS kbuild: add endianness flag to CHEKCFLAGS kbuild: $(CHECK) doesnt need NOSTDINC_FLAGS twice scripts: Fixed printf format mismatch scripts/tags.sh: use `find` for $ALLSOURCE_ARCHS generation coccinelle: deref_null: improve performance coccinelle: mini_lock: improve performance powerpc: Allow LD_DEAD_CODE_DATA_ELIMINATION to be selected kbuild: Allow LD_DEAD_CODE_DATA_ELIMINATION to be selectable if enabled kbuild: LD_DEAD_CODE_DATA_ELIMINATION no -ffunction-sections/-fdata-sections for module build kbuild: Fix asm-generic/vmlinux.lds.h for LD_DEAD_CODE_DATA_ELIMINATION modpost: constify *modname function argument where possible modpost: remove redundant is_vmlinux() test modpost: use strstarts() helper more widely modpost: pass struct elf_info pointer to get_modinfo() checkpatch: remove VMLINUX_SYMBOL() check vmlinux.lds.h: remove no-op macro VMLINUX_SYMBOL() kbuild: remove CONFIG_HAVE_UNDERSCORE_SYMBOL_PREFIX export.h: remove code for prefixing symbols with underscore depmod.sh: remove symbol prefix support ...
2018-06-05bpfilter: switch to CC from HOSTCCAlexei Starovoitov1-0/+5
check that CC can build executables and use that compiler instead of HOSTCC Suggested-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-06-04Linux 4.17v4.17Linus Torvalds1-1/+1
2018-06-01kbuild: add machine size to CHECKFLAGSLuc Van Oostenryck1-0/+3
By default, sparse assumes a 64bit machine when compiled on x86-64 and 32bit when compiled on anything else. This can of course create all sort of problems for the other archs, like issuing false warnings ('shift too big (32) for type unsigned long'), or worse, failing to emit legitimate warnings. Fix this by adding the -m32/-m64 flag, depending on CONFIG_64BIT, to CHECKFLAGS in the main Makefile (and so for all archs). Also, remove the now unneeded -m32/-m64 in arch specific Makefiles. Signed-off-by: Luc Van Oostenryck <luc.vanoostenryck@gmail.com> Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-05-29kbuild: add endianness flag to CHEKCFLAGSLuc Van Oostenryck1-0/+3
The kernel depends on macros like __BYTE_ORDER__, __BIG_ENDIAN__ or __LITTLE_ENDIAN__. OTOH, sparse doesn't know about the endianness of the kernel and by default uses the same as the machine on which sparse was built. Ensure that sparse can predefine the macros corresponding to how the kernel was configured by adding -m{big,little}-endian to CHECKFLAGS in the main Makefile (and so for all archs). Also, remove the equivalent done in arch specific Makefiles. Signed-off-by: Luc Van Oostenryck <luc.vanoostenryck@gmail.com> Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-05-29kbuild: $(CHECK) doesnt need NOSTDINC_FLAGS twiceLuc Van Oostenryck1-1/+0
Currently, $(CHECK) receives NOSTDINC_FLAGS twice: * first directly in the main Makefile via CHECKFLAGS, * then indirectly in scripts/Makefile.build via c_flags. Since once is enough, leave the occurence via c_flags and remove the one via CHECKFLAGS. Signed-off-by: Luc Van Oostenryck <luc.vanoostenryck@gmail.com> Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-05-28kconfig: show compiler version text in the top commentMasahiro Yamada1-0/+2
The kernel configuration phase is now tightly coupled with the compiler in use. It will be nice to show the compiler information in Kconfig. The compiler information will be displayed like this: $ make ARCH=arm64 CROSS_COMPILE=aarch64-linux-gnu- config scripts/kconfig/conf --oldaskconfig Kconfig * * Linux/arm64 4.16.0-rc1 Kernel Configuration * * * Compiler: aarch64-linux-gnu-gcc (Linaro GCC 7.2-2017.11) 7.2.1 20171011 * * * General setup * Compile also drivers which will not load (COMPILE_TEST) [N/y/?] If you use GUI methods such as menuconfig, it will be displayed in the top menu. This is simply implemented by using the 'comment' statement. So, it will be saved into the .config file as well. This commit has a very important meaning. If the compiler is upgraded, Kconfig must be re-run since different compilers have different sets of supported options. All referenced environments are written to include/config/auto.conf.cmd so that any environment change triggers syncconfig, and prompt the user to input new values if needed. With this commit, something like follows will be added to include/config/auto.conf.cmd ifneq "$(CC_VERSION_TEXT)" "aarch64-linux-gnu-gcc (Linaro GCC 7.2-2017.11) 7.2.1 20171011" include/config/auto.conf: FORCE endif Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: Kees Cook <keescook@chromium.org>
2018-05-28kconfig: replace $(UNAME_RELEASE) with function callMasahiro Yamada1-2/+1
Now that 'shell' function is supported, this can be self-contained in Kconfig. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: Kees Cook <keescook@chromium.org> Reviewed-by: Ulf Magnusson <ulfalizer@gmail.com>
2018-05-28kconfig: reference environment variables directly and remove 'option env='Masahiro Yamada1-1/+2
To get access to environment variables, Kconfig needs to define a symbol using "option env=" syntax. It is tedious to add a symbol entry for each environment variable given that we need to define much more such as 'CC', 'AS', 'srctree' etc. to evaluate the compiler capability in Kconfig. Adding '$' for symbol references is grammatically inconsistent. Looking at the code, the symbols prefixed with 'S' are expanded by: - conf_expand_value() This is used to expand 'arch/$ARCH/defconfig' and 'defconfig_list' - sym_expand_string_value() This is used to expand strings in 'source' and 'mainmenu' All of them are fixed values independent of user configuration. So, they can be changed into the direct expansion instead of symbols. This change makes the code much cleaner. The bounce symbols 'SRCARCH', 'ARCH', 'SUBARCH', 'KERNELVERSION' are gone. sym_init() hard-coding 'UNAME_RELEASE' is also gone. 'UNAME_RELEASE' should be replaced with an environment variable. ARCH_DEFCONFIG is a normal symbol, so it should be simply referenced without '$' prefix. The new syntax is addicted by Make. The variable reference needs parentheses, like $(FOO), but you can omit them for single-letter variables, like $F. Yet, in Makefiles, people tend to use the parenthetical form for consistency / clarification. At this moment, only the environment variable is supported, but I will extend the concept of 'variable' later on. The variables are expanded in the lexer so we can simplify the token handling on the parser side. For example, the following code works. [Example code] config MY_TOOLCHAIN_LIST string default "My tools: CC=$(CC), AS=$(AS), CPP=$(CPP)" [Result] $ make -s alldefconfig && tail -n 1 .config CONFIG_MY_TOOLCHAIN_LIST="My tools: CC=gcc, AS=as, CPP=gcc -E" Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: Kees Cook <keescook@chromium.org>
2018-05-28kbuild: remove CONFIG_CROSS_COMPILE supportMasahiro Yamada1-3/+0
Kbuild provides a couple of ways to specify CROSS_COMPILE: [1] Command line [2] Environment [3] arch/*/Makefile (only some architectures) [4] CONFIG_CROSS_COMPILE [4] is problematic for the compiler capability tests in Kconfig. CONFIG_CROSS_COMPILE allows users to change the compiler prefix from 'make menuconfig', etc. It means, the compiler options would have to be all re-calculated everytime CONFIG_CROSS_COMPILE is changed. To avoid complexity and performance issues, I'd like to evaluate the shell commands statically, i.e. only parsing Kconfig files. I guess the majority is [1] or [2]. Currently, there are only 5 defconfig files that specify CONFIG_CROSS_COMPILE. arch/arm/configs/lpc18xx_defconfig arch/hexagon/configs/comet_defconfig arch/nds32/configs/defconfig arch/openrisc/configs/or1ksim_defconfig arch/openrisc/configs/simple_smp_defconfig Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: Kees Cook <keescook@chromium.org>
2018-05-28kbuild: remove kbuild cacheMasahiro Yamada1-3/+2
The kbuild cache was introduced to remember the result of shell commands, some of which are expensive to compute, such as $(call cc-option,...). However, this turned out not so clever as I had first expected. Actually, it is problematic. For example, "$(CC) -print-file-name" is cached. If the compiler is updated, the stale search path causes build error, which is difficult to figure out. Another problem scenario is cache files could be touched while install targets are running under the root permission. We can patch them if desired, but the build infrastructure is getting uglier and uglier. Now, we are going to move compiler flag tests to the configuration phase. If this is completed, the result of compiler tests will be naturally cached in the .config file. We will not have performance issues of incremental building since this testing only happens at Kconfig time. To start this work with a cleaner code base, remove the kbuild cache first. Revert the following commits: Commit 9a234a2e3843 ("kbuild: create directory for make cache only when necessary") Commit e17c400ae194 ("kbuild: shrink .cache.mk when it exceeds 1000 lines") Commit 4e56207130ed ("kbuild: Cache a few more calls to the compiler") Commit 3298b690b21c ("kbuild: Add a cache for generated variables") Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: Kees Cook <keescook@chromium.org>
2018-05-27Linux 4.17-rc7v4.17-rc7Linus Torvalds1-1/+1
2018-05-27Merge tag 'kbuild-fixes-v4.17-2' of ↵Linus Torvalds1-3/+6
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild Pull more Kbuild fixes from Masahiro Yamada: - enable '-fno-tree-loop-im' only when supported - add '-fno-PIE' option before the asm-goto test * tag 'kbuild-fixes-v4.17-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: Makefile: disable PIE before testing asm goto kbuild: gcov: enable -fno-tree-loop-im if supported
2018-05-21Linux 4.17-rc6v4.17-rc6Linus Torvalds1-1/+1
2018-05-17kbuild: LD_DEAD_CODE_DATA_ELIMINATION no -ffunction-sections/-fdata-sections ↵Nicholas Piggin1-2/+2
for module build Modules do not tend to cope with -ffunction-sections, even though they do not link with -gc-sections. It may be possible for unused symbols to be trimmed from modules, but in general that would take much more work in architecture module linker scripts. For now, enable these only for kernel build. Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-05-17depmod.sh: remove symbol prefix supportMasahiro Yamada1-1/+1
CONFIG_HAVE_UNDERSCORE_SYMBOL_PREFIX was selected by BLACKFIN, METAG. They were removed by commit 4ba66a976072 ("arch: remove blackfin port"), commit bb6fb6dfcc17 ("metag: Remove arch/metag/"), respectively. No more architecture enables CONFIG_HAVE_UNDERSCORE_SYMBOL_PREFIX, hence the last argument of scripts/depmod.sh can be removed. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
2018-05-17Makefile: disable PIE before testing asm gotoMichal Kubecek1-2/+3
Since commit e501ce957a78 ("x86: Force asm-goto"), aarch64 build on distributions which enable PIE by default (e.g. openSUSE Tumbleweed) does not detect support for asm goto correctly. The problem is that ARM specific part of scripts/gcc-goto.sh fails with PIE even with recent gcc versions. Moving the asm goto detection up in Makefile put it before the place where we disable PIE. As a result, kernel is built without jump label support. Move the lines disabling PIE before the asm goto test to make it work. Fixes: e501ce957a78 ("x86: Force asm-goto") Reported-by: Andreas Faerber <afaerber@suse.com> Signed-off-by: Michal Kubecek <mkubecek@suse.cz> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-05-17kbuild: gcov: enable -fno-tree-loop-im if supportedNick Desaulniers1-1/+3
Clang does not recognize this compiler option. Reported-by: Prasad Sodagudi <psodagud@codeaurora.org> Signed-off-by: Nick Desaulniers <ndesaulniers@google.com> Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-05-14Linux 4.17-rc5v4.17-rc5Linus Torvalds1-1/+1
2018-05-07Linux 4.17-rc4v4.17-rc4Linus Torvalds1-2/+2
2018-04-30Linux v4.17-rc3v4.17-rc3Linus Torvalds1-1/+1
2018-04-23Linux 4.17-rc2v4.17-rc2Linus Torvalds1-1/+1
2018-04-16Linux 4.17-rc1v4.17-rc1Linus Torvalds1-2/+2
2018-04-07kbuild: use -fmacro-prefix-map to make __FILE__ a relative pathMasahiro Yamada1-0/+3
The __FILE__ macro is used everywhere in the kernel to locate the file printing the log message, such as WARN_ON(), etc. If the kernel is built out of tree, this can be a long absolute path, like this: WARNING: CPU: 1 PID: 1 at /path/to/build/directory/arch/arm64/kernel/foo.c:... This is because Kbuild runs in the objtree instead of the srctree, then __FILE__ is expanded to a file path prefixed with $(srctree)/. Commit 9da0763bdd82 ("kbuild: Use relative path when building in a subdir of the source tree") improved this to some extent; $(srctree) becomes ".." if the objtree is a child of the srctree. For other cases of out-of-tree build, __FILE__ is still the absolute path. It also means the kernel image depends on where it was built. A brand-new option from GCC, -fmacro-prefix-map, solves this problem. If your compiler supports it, __FILE__ is the relative path from the srctree regardless of O= option. This provides more readable log and more reproducible builds. Please note __FILE__ is always an absolute path for external modules. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-04-07kbuild: rename *-asn1.[ch] to *.asn1.[ch]Masahiro Yamada1-1/+1
Our convention is to distinguish file types by suffixes with a period as a separator. *-asn1.[ch] is a different pattern from other generated sources such as *.lex.c, *.tab.[ch], *.dtb.S, etc. More confusing, files with '-asn1.[ch]' are generated files, but '_asn1.[ch]' are checked-in files: net/netfilter/nf_conntrack_h323_asn1.c include/linux/netfilter/nf_conntrack_h323_asn1.h include/linux/sunrpc/gss_asn1.h Rename generated files to *.asn1.[ch] for consistency. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-04-07kbuild: clean up *-asn1.[ch] patterns from top-level MakefileMasahiro Yamada1-0/+1
Clean up these patterns from the top Makefile to omit 'clean-files' in each Makefile. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-04-07kbuild: clean up *.lex.c and *.tab.[ch] patterns from top-level MakefileMasahiro Yamada1-0/+1
Files suffixed by .lex.c, .tab.[ch] are generated lexers, parsers, respectively. Clean them up globally from the top Makefile. Some of the final host programs those lexer/parser are linked into are necessary for building external modules, but the intermediates are unneeded. They can be cleaned away by 'make clean' instead of 'make mrproper'. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Acked-by: Frank Rowand <frowand.list@gmail.com>
2018-04-04Merge tag 'kconfig-v4.17' of ↵Linus Torvalds1-2/+4
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild Pull Kconfig updates from Masahiro Yamada: - improve checkpatch for more precise Kconfig code checking - clarify effective selects by grouping reverse dependencies in help - do not write out '# CONFIG_FOO is not set' from invisible symbols - make oldconfig as silent as it should be - rename 'silentoldconfig' to 'syncconfig' - add unit-test framework and several test cases - warn unmet dependency of tristate symbols - make unmet dependency warnings readable, removing false positives - improve recursive include detection - use yylineno to simplify the line number tracking - misc cleanups * tag 'kconfig-v4.17' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (30 commits) kconfig: use yylineno option instead of manual lineno increments kconfig: detect recursive inclusion earlier kconfig: remove duplicated file name and lineno of recursive inclusion kconfig: do not include both curses.h and ncurses.h for nconfig kconfig: make unmet dependency warnings readable kconfig: warn unmet direct dependency of tristate symbols selected by y kconfig: tests: test if recursive inclusion is detected kconfig: tests: test if recursive dependencies are detected kconfig: tests: test randconfig for choice in choice kconfig: tests: test defconfig when two choices interact kconfig: tests: check visibility of tristate choice values in y choice kconfig: tests: check unneeded "is not set" with unmet dependency kconfig: tests: test if new symbols in choice are asked kconfig: tests: test automatic submenu creation kconfig: tests: add basic choice tests kconfig: tests: add framework for Kconfig unit testing kbuild: add PYTHON2 and PYTHON3 variables kconfig: remove redundant streamline_config.pl prerequisite kconfig: rename silentoldconfig to syncconfig kconfig: invoke oldconfig instead of silentoldconfig from local*config ...
2018-04-04Merge tag 'kbuild-v4.17' of ↵Linus Torvalds1-40/+49
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild Pull Kbuild updates from Masahiro Yamada: - add a shell script to get Clang version - improve portability of build scripts - drop always-enabled CONFIG_THIN_ARCHIVE and remove unused code - rename built-in.o which is now thin archive to built-in.a - process clean/build targets one by one to get along with -j option - simplify ld-option - improve building with CONFIG_TRIM_UNUSED_KSYMS - define KBUILD_MODNAME even for objects shared among multiple modules - avoid linking multiple instances of same objects from composite objects - move <linux/compiler_types.h> to c_flags to include it only for C files - clean-up various Makefiles * tag 'kbuild-v4.17' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (29 commits) kbuild: get <linux/compiler_types.h> out of <linux/kconfig.h> kbuild: clean up link rule of composite modules kbuild: clean up archive rule of built-in.a kbuild: remove partial section mismatch detection for built-in.a net: liquidio: clean up Makefile for simpler composite object handling lib: zstd: clean up Makefile for simpler composite object handling kbuild: link $(real-obj-y) instead of $(obj-y) into built-in.a kbuild: rename real-objs-y/m to real-obj-y/m kbuild: move modname and modname-multi close to modname_flags kbuild: simplify modname calculation kbuild: fix modname for composite modules kbuild: define KBUILD_MODNAME even if multiple modules share objects kbuild: remove unnecessary $(subst $(obj)/, , ...) in modname-multi kbuild: Use ls(1) instead of stat(1) to obtain file size kbuild: link vmlinux only once for CONFIG_TRIM_UNUSED_KSYMS kbuild: move include/config/ksym/* to include/ksym/* kbuild: move CONFIG_TRIM_UNUSED_KSYMS code unneeded for external module kbuild: restore autoksyms.h touch to the top Makefile kbuild: move 'scripts' target below kbuild: remove wrong 'touch' in adjust_autoksyms.sh ...
2018-04-03Merge tag 'arch-removal' of ↵Linus Torvalds1-8/+0
git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic Pul removal of obsolete architecture ports from Arnd Bergmann: "This removes the entire architecture code for blackfin, cris, frv, m32r, metag, mn10300, score, and tile, including the associated device drivers. I have been working with the (former) maintainers for each one to ensure that my interpretation was right and the code is definitely unused in mainline kernels. Many had fond memories of working on the respective ports to start with and getting them included in upstream, but also saw no point in keeping the port alive without any users. In the end, it seems that while the eight architectures are extremely different, they all suffered the same fate: There was one company in charge of an SoC line, a CPU microarchitecture and a software ecosystem, which was more costly than licensing newer off-the-shelf CPU cores from a third party (typically ARM, MIPS, or RISC-V). It seems that all the SoC product lines are still around, but have not used the custom CPU architectures for several years at this point. In contrast, CPU instruction sets that remain popular and have actively maintained kernel ports tend to all be used across multiple licensees. [ See the new nds32 port merged in the previous commit for the next generation of "one company in charge of an SoC line, a CPU microarchitecture and a software ecosystem" - Linus ] The removal came out of a discussion that is now documented at https://lwn.net/Articles/748074/. Unlike the original plans, I'm not marking any ports as deprecated but remove them all at once after I made sure that they are all unused. Some architectures (notably tile, mn10300, and blackfin) are still being shipped in products with old kernels, but those products will never be updated to newer kernel releases. After this series, we still have a few architectures without mainline gcc support: - unicore32 and hexagon both have very outdated gcc releases, but the maintainers promised to work on providing something newer. At least in case of hexagon, this will only be llvm, not gcc. - openrisc, risc-v and nds32 are still in the process of finishing their support or getting it added to mainline gcc in the first place. They all have patched gcc-7.3 ports that work to some degree, but complete upstream support won't happen before gcc-8.1. Csky posted their first kernel patch set last week, their situation will be similar [ Palmer Dabbelt points out that RISC-V support is in mainline gcc since gcc-7, although gcc-7.3.0 is the recommended minimum - Linus ]" This really says it all: 2498 files changed, 95 insertions(+), 467668 deletions(-) * tag 'arch-removal' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic: (74 commits) MAINTAINERS: UNICORE32: Change email account staging: iio: remove iio-trig-bfin-timer driver tty: hvc: remove tile driver tty: remove bfin_jtag_comm and hvc_bfin_jtag drivers serial: remove tile uart driver serial: remove m32r_sio driver serial: remove blackfin drivers serial: remove cris/etrax uart drivers usb: Remove Blackfin references in USB support usb: isp1362: remove blackfin arch glue usb: musb: remove blackfin port usb: host: remove tilegx platform glue pwm: remove pwm-bfin driver i2c: remove bfin-twi driver spi: remove blackfin related host drivers watchdog: remove bfin_wdt driver can: remove bfin_can driver mmc: remove bfin_sdh driver input: misc: remove blackfin rotary driver input: keyboard: remove bf54x driver ...
2018-04-03Merge branch 'x86-build-for-linus' of ↵Linus Torvalds1-6/+7
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 build updates from Ingo Molnar: "The biggest change is the forcing of asm-goto support on x86, which effectively increases the GCC minimum supported version to gcc-4.5 (on x86)" * 'x86-build-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/build: Don't pass in -D__KERNEL__ multiple times x86: Remove FAST_FEATURE_TESTS x86: Force asm-goto x86/build: Drop superfluous ALIGN from the linker script
2018-04-02Linux 4.16v4.16Linus Torvalds1-1/+1
2018-03-31Merge tag 'kbuild-fixes-v4.16-3' of ↵Linus Torvalds1-2/+2
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild Pull Kbuild fixes from Masahiro Yamada: - fix missed rebuild of TRIM_UNUSED_KSYMS - fix rpm-pkg for GNU tar >= 1.29 - include scripts/dtc/include-prefixes/* to kernel header deb-pkg - add -no-integrated-as option ealier to fix building with Clang - fix netfilter Makefile for parallel building * tag 'kbuild-fixes-v4.16-3' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: netfilter: nf_nat_snmp_basic: add correct dependency to Makefile kbuild: rpm-pkg: Support GNU tar >= 1.29 builddeb: Fix header package regarding dtc source links kbuild: set no-integrated-as before incl. arch Makefile kbuild: make scripts/adjust_autoksyms.sh robust against timestamp races
2018-03-26Linux 4.16-rc7v4.16-rc7Linus Torvalds1-1/+1
2018-03-25kbuild: add PYTHON2 and PYTHON3 variablesMasahiro Yamada1-1/+3
The variable 'PYTHON' allows users to specify a proper executable name in case the default 'python' does not work. However, this does not address the case where both Python 2.x and 3.x scripts are used in one source tree. PEP 394 (https://www.python.org/dev/peps/pep-0394/) provides a convention for Python scripts portability. Here is a quotation: In order to tolerate differences across platforms, all new code that needs to invoke the Python interpreter should not specify 'python', but rather should specify either 'python2' or 'python3'. This distinction should be made in shebangs, when invoking from a shell script, when invoking via the system() call, or when invoking in any other context. One exception to this is scripts that are deliberately written to be source compatible with both Python 2.x and 3.x. Such scripts may continue to use python on their shebang line without affecting their portability. To meet this requirement, this commit adds new variables 'PYTHON2' and 'PYTHON3'. arch/ia64/scripts/unwcheck.py is the only script that has ever used $(PYTHON). Recent commit bd5edbe67794 ("ia64: convert unwcheck.py to python3") converted it to be compatible with both Python 2.x and 3.x, so this is the exceptional case where the use of 'python' is allowed. So, I did not touch arch/ia64/Makefile. tools/perf/Makefile.config sets PYTHON and PYTHON2 by itself, so it is not affected by this commit. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-03-25kconfig: rename silentoldconfig to syncconfigMasahiro Yamada1-1/+1
As commit cedd55d49dee ("kconfig: Remove silentoldconfig from help and docs; fix kconfig/conf's help") mentioned, 'silentoldconfig' is a historical misnomer. That commit removed it from help and docs since it is an internal interface. If so, it should be allowed to rename it to something more intuitive. 'syncconfig' is the one I came up with because it updates the .config if necessary, then synchronize include/generated/autoconf.h and include/config/* with it. You should not manually invoke 'silentoldcofig'. Display warning if used in case existing scripts are doing wrong. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: Ulf Magnusson <ulfalizer@gmail.com>
2018-03-25kbuild: link vmlinux only once for CONFIG_TRIM_UNUSED_KSYMSMasahiro Yamada1-12/+10
If CONFIG_TRIM_UNUSED_KSYMS is enabled and the kernel is built from a pristine state, the vmlinux is linked twice. [1] A user runs 'make' [2] First build with empty autoksyms.h [3] adjust_autoksyms.sh updates autoksyms.h and recurses 'make vmlinux' --------(begin sub-make)-------- [4] Second build with new autoksyms.h [5] link-vmlinux.sh is invoked because vmlinux is missing ---------(end sub-make)--------- [6] link-vmlinux.sh is invoked again despite vmlinux is up-to-date. The reason of [6] is probably because Make already decided to update vmlinux at the time of [2] because vmlinux was missing when Make built up the dependency graph. Because if_changed is implemented based on $?, this issue can be narrowed down to how Make handles $?. You can test it with the following simple code: [Test Makefile] A: B @echo newer prerequisite: $? cp B A B: C cp C B touch A [Result] $ rm -f A B $ touch C $ make cp C B touch A newer prerequisite: B cp B A Here, 'A' has been touched in the recipe of 'B'. So, the dependency 'A: B' has already been met before the recipe of 'A' is executed. However, Make does not notice the fact that the recipe of 'B' also updates 'A' as a side-effect. The situation is similar in this case; the vmlinux has actually been updated in the vmlinux_prereq target. Make cannot predict this, so judges the vmlinux is old. link-vmlinux.sh is costly, so it is better to not run it when unneeded. Split CONFIG_TRIM_UNUSED_KSYMS recursion to a dedicated target. The reason of commit 2441e78b1919 ("kbuild: better abstract vmlinux sequential prerequisites") was to cater to CONFIG_BUILD_DOCSRC, but it was later removed by commit 184892925118 ("samples: move blackfin gptimers-example from Documentation"). Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Acked-by: Nicolas Pitre <nico@linaro.org>
2018-03-25kbuild: move include/config/ksym/* to include/ksym/*Masahiro Yamada1-1/+1
The idea of using fixdep was inspired by Kconfig, but autoksyms belongs to a different group. So, I want to move those touched files under include/config/ksym/ to include/ksym/. The directory include/ksym/ can be removed by 'make clean' because it is meaningless for the external module building. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Acked-by: Nicolas Pitre <nico@linaro.org>