summaryrefslogtreecommitdiff
path: root/Makefile
AgeCommit message (Collapse)AuthorFilesLines
2018-06-07Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-nextLinus Torvalds1-0/+5
Pull networking updates from David Miller: 1) Add Maglev hashing scheduler to IPVS, from Inju Song. 2) Lots of new TC subsystem tests from Roman Mashak. 3) Add TCP zero copy receive and fix delayed acks and autotuning with SO_RCVLOWAT, from Eric Dumazet. 4) Add XDP_REDIRECT support to mlx5 driver, from Jesper Dangaard Brouer. 5) Add ttl inherit support to vxlan, from Hangbin Liu. 6) Properly separate ipv6 routes into their logically independant components. fib6_info for the routing table, and fib6_nh for sets of nexthops, which thus can be shared. From David Ahern. 7) Add bpf_xdp_adjust_tail helper, which can be used to generate ICMP messages from XDP programs. From Nikita V. Shirokov. 8) Lots of long overdue cleanups to the r8169 driver, from Heiner Kallweit. 9) Add BTF ("BPF Type Format"), from Martin KaFai Lau. 10) Add traffic condition monitoring to iwlwifi, from Luca Coelho. 11) Plumb extack down into fib_rules, from Roopa Prabhu. 12) Add Flower classifier offload support to igb, from Vinicius Costa Gomes. 13) Add UDP GSO support, from Willem de Bruijn. 14) Add documentation for eBPF helpers, from Quentin Monnet. 15) Add TLS tx offload to mlx5, from Ilya Lesokhin. 16) Allow applications to be given the number of bytes available to read on a socket via a control message returned from recvmsg(), from Soheil Hassas Yeganeh. 17) Add x86_32 eBPF JIT compiler, from Wang YanQing. 18) Add AF_XDP sockets, with zerocopy support infrastructure as well. From Björn Töpel. 19) Remove indirect load support from all of the BPF JITs and handle these operations in the verifier by translating them into native BPF instead. From Daniel Borkmann. 20) Add GRO support to ipv6 gre tunnels, from Eran Ben Elisha. 21) Allow XDP programs to do lookups in the main kernel routing tables for forwarding. From David Ahern. 22) Allow drivers to store hardware state into an ELF section of kernel dump vmcore files, and use it in cxgb4. From Rahul Lakkireddy. 23) Various RACK and loss detection improvements in TCP, from Yuchung Cheng. 24) Add TCP SACK compression, from Eric Dumazet. 25) Add User Mode Helper support and basic bpfilter infrastructure, from Alexei Starovoitov. 26) Support ports and protocol values in RTM_GETROUTE, from Roopa Prabhu. 27) Support bulking in ->ndo_xdp_xmit() API, from Jesper Dangaard Brouer. 28) Add lots of forwarding selftests, from Petr Machata. 29) Add generic network device failover driver, from Sridhar Samudrala. * ra.kernel.org:/pub/scm/linux/kernel/git/davem/net-next: (1959 commits) strparser: Add __strp_unpause and use it in ktls. rxrpc: Fix terminal retransmission connection ID to include the channel net: hns3: Optimize PF CMDQ interrupt switching process net: hns3: Fix for VF mailbox receiving unknown message net: hns3: Fix for VF mailbox cannot receiving PF response bnx2x: use the right constant Revert "net: sched: cls: Fix offloading when ingress dev is vxlan" net: dsa: b53: Fix for brcm tag issue in Cygnus SoC enic: fix UDP rss bits netdev-FAQ: clarify DaveM's position for stable backports rtnetlink: validate attributes in do_setlink() mlxsw: Add extack messages for port_{un, }split failures netdevsim: Add extack error message for devlink reload devlink: Add extack to reload and port_{un, }split operations net: metrics: add proper netlink validation ipmr: fix error path when ipmr_new_table fails ip6mr: only set ip6mr_table from setsockopt when ip6mr_new_table succeeds net: hns3: remove unused hclgevf_cfg_func_mta_filter netfilter: provide udp*_lib_lookup for nf_tproxy qed*: Utilize FW 8.37.2.0 ...
2018-06-06Merge tag 'kconfig-v4.18' of ↵Linus Torvalds1-6/+4
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild Pull Kconfig updates from Masahiro Yamada: "Kconfig now supports new functionality to perform textual substitution. It has been a while since Linus suggested to move compiler option tests from makefiles to Kconfig. Finally, here it is. The implementation has been generalized into a Make-like macro language. Some built-in functions such as 'shell' are provided. Variables and user-defined functions are also supported so that 'cc-option', 'ld-option', etc. are implemented as macros. Summary: - refactor package checks for building {m,n,q,g}conf - remove unused/unmaintained localization support - remove Kbuild cache - drop CONFIG_CROSS_COMPILE support - replace 'option env=' with direct variable expansion - add built-in functions such as 'shell' - support variables and user-defined functions - add helper macros as as 'cc-option' - add unit tests and a document of the new macro language - add 'testconfig' to help - fix warnings from GCC 8.1" * tag 'kconfig-v4.18' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (30 commits) kconfig: Avoid format overflow warning from GCC 8.1 kbuild: Move last word of nconfig help to the previous line kconfig: Add testconfig into make help output kconfig: add basic helper macros to scripts/Kconfig.include kconfig: show compiler version text in the top comment kconfig: test: add Kconfig macro language tests Documentation: kconfig: document a new Kconfig macro language kconfig: error out if a recursive variable references itself kconfig: add 'filename' and 'lineno' built-in variables kconfig: add 'info', 'warning-if', and 'error-if' built-in functions kconfig: expand lefthand side of assignment statement kconfig: support append assignment operator kconfig: support simply expanded variable kconfig: support user-defined function and recursively expanded variable kconfig: begin PARAM state only when seeing a command keyword kconfig: replace $(UNAME_RELEASE) with function call kconfig: add 'shell' built-in function kconfig: add built-in function support kconfig: make default prompt of mainmenu less specific kconfig: remove sym_expand_string_value() ...
2018-06-06Merge tag 'kbuild-v4.18' of ↵Linus Torvalds1-4/+9
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild Pull Kbuild updates from Masahiro Yamada: - improve fixdep to coalesce consecutive slashes in dep-files - fix some issues of the maintainer string generation in deb-pkg script - remove unused CONFIG_HAVE_UNDERSCORE_SYMBOL_PREFIX and clean-up several tools and linker scripts - clean-up modpost - allow to enable the dead code/data elimination for PowerPC in EXPERT mode - improve two coccinelle scripts for better performance - pass endianness and machine size flags to sparse for all architecture - misc fixes * tag 'kbuild-v4.18' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (25 commits) kbuild: add machine size to CHECKFLAGS kbuild: add endianness flag to CHEKCFLAGS kbuild: $(CHECK) doesnt need NOSTDINC_FLAGS twice scripts: Fixed printf format mismatch scripts/tags.sh: use `find` for $ALLSOURCE_ARCHS generation coccinelle: deref_null: improve performance coccinelle: mini_lock: improve performance powerpc: Allow LD_DEAD_CODE_DATA_ELIMINATION to be selected kbuild: Allow LD_DEAD_CODE_DATA_ELIMINATION to be selectable if enabled kbuild: LD_DEAD_CODE_DATA_ELIMINATION no -ffunction-sections/-fdata-sections for module build kbuild: Fix asm-generic/vmlinux.lds.h for LD_DEAD_CODE_DATA_ELIMINATION modpost: constify *modname function argument where possible modpost: remove redundant is_vmlinux() test modpost: use strstarts() helper more widely modpost: pass struct elf_info pointer to get_modinfo() checkpatch: remove VMLINUX_SYMBOL() check vmlinux.lds.h: remove no-op macro VMLINUX_SYMBOL() kbuild: remove CONFIG_HAVE_UNDERSCORE_SYMBOL_PREFIX export.h: remove code for prefixing symbols with underscore depmod.sh: remove symbol prefix support ...
2018-06-05bpfilter: switch to CC from HOSTCCAlexei Starovoitov1-0/+5
check that CC can build executables and use that compiler instead of HOSTCC Suggested-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-06-04Linux 4.17v4.17Linus Torvalds1-1/+1
2018-06-01kbuild: add machine size to CHECKFLAGSLuc Van Oostenryck1-0/+3
By default, sparse assumes a 64bit machine when compiled on x86-64 and 32bit when compiled on anything else. This can of course create all sort of problems for the other archs, like issuing false warnings ('shift too big (32) for type unsigned long'), or worse, failing to emit legitimate warnings. Fix this by adding the -m32/-m64 flag, depending on CONFIG_64BIT, to CHECKFLAGS in the main Makefile (and so for all archs). Also, remove the now unneeded -m32/-m64 in arch specific Makefiles. Signed-off-by: Luc Van Oostenryck <luc.vanoostenryck@gmail.com> Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-05-29kbuild: add endianness flag to CHEKCFLAGSLuc Van Oostenryck1-0/+3
The kernel depends on macros like __BYTE_ORDER__, __BIG_ENDIAN__ or __LITTLE_ENDIAN__. OTOH, sparse doesn't know about the endianness of the kernel and by default uses the same as the machine on which sparse was built. Ensure that sparse can predefine the macros corresponding to how the kernel was configured by adding -m{big,little}-endian to CHECKFLAGS in the main Makefile (and so for all archs). Also, remove the equivalent done in arch specific Makefiles. Signed-off-by: Luc Van Oostenryck <luc.vanoostenryck@gmail.com> Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-05-29kbuild: $(CHECK) doesnt need NOSTDINC_FLAGS twiceLuc Van Oostenryck1-1/+0
Currently, $(CHECK) receives NOSTDINC_FLAGS twice: * first directly in the main Makefile via CHECKFLAGS, * then indirectly in scripts/Makefile.build via c_flags. Since once is enough, leave the occurence via c_flags and remove the one via CHECKFLAGS. Signed-off-by: Luc Van Oostenryck <luc.vanoostenryck@gmail.com> Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-05-28kconfig: show compiler version text in the top commentMasahiro Yamada1-0/+2
The kernel configuration phase is now tightly coupled with the compiler in use. It will be nice to show the compiler information in Kconfig. The compiler information will be displayed like this: $ make ARCH=arm64 CROSS_COMPILE=aarch64-linux-gnu- config scripts/kconfig/conf --oldaskconfig Kconfig * * Linux/arm64 4.16.0-rc1 Kernel Configuration * * * Compiler: aarch64-linux-gnu-gcc (Linaro GCC 7.2-2017.11) 7.2.1 20171011 * * * General setup * Compile also drivers which will not load (COMPILE_TEST) [N/y/?] If you use GUI methods such as menuconfig, it will be displayed in the top menu. This is simply implemented by using the 'comment' statement. So, it will be saved into the .config file as well. This commit has a very important meaning. If the compiler is upgraded, Kconfig must be re-run since different compilers have different sets of supported options. All referenced environments are written to include/config/auto.conf.cmd so that any environment change triggers syncconfig, and prompt the user to input new values if needed. With this commit, something like follows will be added to include/config/auto.conf.cmd ifneq "$(CC_VERSION_TEXT)" "aarch64-linux-gnu-gcc (Linaro GCC 7.2-2017.11) 7.2.1 20171011" include/config/auto.conf: FORCE endif Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: Kees Cook <keescook@chromium.org>
2018-05-28kconfig: replace $(UNAME_RELEASE) with function callMasahiro Yamada1-2/+1
Now that 'shell' function is supported, this can be self-contained in Kconfig. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: Kees Cook <keescook@chromium.org> Reviewed-by: Ulf Magnusson <ulfalizer@gmail.com>
2018-05-28kconfig: reference environment variables directly and remove 'option env='Masahiro Yamada1-1/+2
To get access to environment variables, Kconfig needs to define a symbol using "option env=" syntax. It is tedious to add a symbol entry for each environment variable given that we need to define much more such as 'CC', 'AS', 'srctree' etc. to evaluate the compiler capability in Kconfig. Adding '$' for symbol references is grammatically inconsistent. Looking at the code, the symbols prefixed with 'S' are expanded by: - conf_expand_value() This is used to expand 'arch/$ARCH/defconfig' and 'defconfig_list' - sym_expand_string_value() This is used to expand strings in 'source' and 'mainmenu' All of them are fixed values independent of user configuration. So, they can be changed into the direct expansion instead of symbols. This change makes the code much cleaner. The bounce symbols 'SRCARCH', 'ARCH', 'SUBARCH', 'KERNELVERSION' are gone. sym_init() hard-coding 'UNAME_RELEASE' is also gone. 'UNAME_RELEASE' should be replaced with an environment variable. ARCH_DEFCONFIG is a normal symbol, so it should be simply referenced without '$' prefix. The new syntax is addicted by Make. The variable reference needs parentheses, like $(FOO), but you can omit them for single-letter variables, like $F. Yet, in Makefiles, people tend to use the parenthetical form for consistency / clarification. At this moment, only the environment variable is supported, but I will extend the concept of 'variable' later on. The variables are expanded in the lexer so we can simplify the token handling on the parser side. For example, the following code works. [Example code] config MY_TOOLCHAIN_LIST string default "My tools: CC=$(CC), AS=$(AS), CPP=$(CPP)" [Result] $ make -s alldefconfig && tail -n 1 .config CONFIG_MY_TOOLCHAIN_LIST="My tools: CC=gcc, AS=as, CPP=gcc -E" Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: Kees Cook <keescook@chromium.org>
2018-05-28kbuild: remove CONFIG_CROSS_COMPILE supportMasahiro Yamada1-3/+0
Kbuild provides a couple of ways to specify CROSS_COMPILE: [1] Command line [2] Environment [3] arch/*/Makefile (only some architectures) [4] CONFIG_CROSS_COMPILE [4] is problematic for the compiler capability tests in Kconfig. CONFIG_CROSS_COMPILE allows users to change the compiler prefix from 'make menuconfig', etc. It means, the compiler options would have to be all re-calculated everytime CONFIG_CROSS_COMPILE is changed. To avoid complexity and performance issues, I'd like to evaluate the shell commands statically, i.e. only parsing Kconfig files. I guess the majority is [1] or [2]. Currently, there are only 5 defconfig files that specify CONFIG_CROSS_COMPILE. arch/arm/configs/lpc18xx_defconfig arch/hexagon/configs/comet_defconfig arch/nds32/configs/defconfig arch/openrisc/configs/or1ksim_defconfig arch/openrisc/configs/simple_smp_defconfig Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: Kees Cook <keescook@chromium.org>
2018-05-28kbuild: remove kbuild cacheMasahiro Yamada1-3/+2
The kbuild cache was introduced to remember the result of shell commands, some of which are expensive to compute, such as $(call cc-option,...). However, this turned out not so clever as I had first expected. Actually, it is problematic. For example, "$(CC) -print-file-name" is cached. If the compiler is updated, the stale search path causes build error, which is difficult to figure out. Another problem scenario is cache files could be touched while install targets are running under the root permission. We can patch them if desired, but the build infrastructure is getting uglier and uglier. Now, we are going to move compiler flag tests to the configuration phase. If this is completed, the result of compiler tests will be naturally cached in the .config file. We will not have performance issues of incremental building since this testing only happens at Kconfig time. To start this work with a cleaner code base, remove the kbuild cache first. Revert the following commits: Commit 9a234a2e3843 ("kbuild: create directory for make cache only when necessary") Commit e17c400ae194 ("kbuild: shrink .cache.mk when it exceeds 1000 lines") Commit 4e56207130ed ("kbuild: Cache a few more calls to the compiler") Commit 3298b690b21c ("kbuild: Add a cache for generated variables") Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: Kees Cook <keescook@chromium.org>
2018-05-27Linux 4.17-rc7v4.17-rc7Linus Torvalds1-1/+1
2018-05-27Merge tag 'kbuild-fixes-v4.17-2' of ↵Linus Torvalds1-3/+6
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild Pull more Kbuild fixes from Masahiro Yamada: - enable '-fno-tree-loop-im' only when supported - add '-fno-PIE' option before the asm-goto test * tag 'kbuild-fixes-v4.17-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: Makefile: disable PIE before testing asm goto kbuild: gcov: enable -fno-tree-loop-im if supported
2018-05-21Linux 4.17-rc6v4.17-rc6Linus Torvalds1-1/+1
2018-05-17kbuild: LD_DEAD_CODE_DATA_ELIMINATION no -ffunction-sections/-fdata-sections ↵Nicholas Piggin1-2/+2
for module build Modules do not tend to cope with -ffunction-sections, even though they do not link with -gc-sections. It may be possible for unused symbols to be trimmed from modules, but in general that would take much more work in architecture module linker scripts. For now, enable these only for kernel build. Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-05-17depmod.sh: remove symbol prefix supportMasahiro Yamada1-1/+1
CONFIG_HAVE_UNDERSCORE_SYMBOL_PREFIX was selected by BLACKFIN, METAG. They were removed by commit 4ba66a976072 ("arch: remove blackfin port"), commit bb6fb6dfcc17 ("metag: Remove arch/metag/"), respectively. No more architecture enables CONFIG_HAVE_UNDERSCORE_SYMBOL_PREFIX, hence the last argument of scripts/depmod.sh can be removed. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
2018-05-17Makefile: disable PIE before testing asm gotoMichal Kubecek1-2/+3
Since commit e501ce957a78 ("x86: Force asm-goto"), aarch64 build on distributions which enable PIE by default (e.g. openSUSE Tumbleweed) does not detect support for asm goto correctly. The problem is that ARM specific part of scripts/gcc-goto.sh fails with PIE even with recent gcc versions. Moving the asm goto detection up in Makefile put it before the place where we disable PIE. As a result, kernel is built without jump label support. Move the lines disabling PIE before the asm goto test to make it work. Fixes: e501ce957a78 ("x86: Force asm-goto") Reported-by: Andreas Faerber <afaerber@suse.com> Signed-off-by: Michal Kubecek <mkubecek@suse.cz> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-05-17kbuild: gcov: enable -fno-tree-loop-im if supportedNick Desaulniers1-1/+3
Clang does not recognize this compiler option. Reported-by: Prasad Sodagudi <psodagud@codeaurora.org> Signed-off-by: Nick Desaulniers <ndesaulniers@google.com> Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-05-14Linux 4.17-rc5v4.17-rc5Linus Torvalds1-1/+1
2018-05-07Linux 4.17-rc4v4.17-rc4Linus Torvalds1-2/+2
2018-04-30Linux v4.17-rc3v4.17-rc3Linus Torvalds1-1/+1
2018-04-23Linux 4.17-rc2v4.17-rc2Linus Torvalds1-1/+1
2018-04-16Linux 4.17-rc1v4.17-rc1Linus Torvalds1-2/+2
2018-04-07kbuild: use -fmacro-prefix-map to make __FILE__ a relative pathMasahiro Yamada1-0/+3
The __FILE__ macro is used everywhere in the kernel to locate the file printing the log message, such as WARN_ON(), etc. If the kernel is built out of tree, this can be a long absolute path, like this: WARNING: CPU: 1 PID: 1 at /path/to/build/directory/arch/arm64/kernel/foo.c:... This is because Kbuild runs in the objtree instead of the srctree, then __FILE__ is expanded to a file path prefixed with $(srctree)/. Commit 9da0763bdd82 ("kbuild: Use relative path when building in a subdir of the source tree") improved this to some extent; $(srctree) becomes ".." if the objtree is a child of the srctree. For other cases of out-of-tree build, __FILE__ is still the absolute path. It also means the kernel image depends on where it was built. A brand-new option from GCC, -fmacro-prefix-map, solves this problem. If your compiler supports it, __FILE__ is the relative path from the srctree regardless of O= option. This provides more readable log and more reproducible builds. Please note __FILE__ is always an absolute path for external modules. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-04-07kbuild: rename *-asn1.[ch] to *.asn1.[ch]Masahiro Yamada1-1/+1
Our convention is to distinguish file types by suffixes with a period as a separator. *-asn1.[ch] is a different pattern from other generated sources such as *.lex.c, *.tab.[ch], *.dtb.S, etc. More confusing, files with '-asn1.[ch]' are generated files, but '_asn1.[ch]' are checked-in files: net/netfilter/nf_conntrack_h323_asn1.c include/linux/netfilter/nf_conntrack_h323_asn1.h include/linux/sunrpc/gss_asn1.h Rename generated files to *.asn1.[ch] for consistency. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-04-07kbuild: clean up *-asn1.[ch] patterns from top-level MakefileMasahiro Yamada1-0/+1
Clean up these patterns from the top Makefile to omit 'clean-files' in each Makefile. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-04-07kbuild: clean up *.lex.c and *.tab.[ch] patterns from top-level MakefileMasahiro Yamada1-0/+1
Files suffixed by .lex.c, .tab.[ch] are generated lexers, parsers, respectively. Clean them up globally from the top Makefile. Some of the final host programs those lexer/parser are linked into are necessary for building external modules, but the intermediates are unneeded. They can be cleaned away by 'make clean' instead of 'make mrproper'. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Acked-by: Frank Rowand <frowand.list@gmail.com>
2018-04-04Merge tag 'kconfig-v4.17' of ↵Linus Torvalds1-2/+4
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild Pull Kconfig updates from Masahiro Yamada: - improve checkpatch for more precise Kconfig code checking - clarify effective selects by grouping reverse dependencies in help - do not write out '# CONFIG_FOO is not set' from invisible symbols - make oldconfig as silent as it should be - rename 'silentoldconfig' to 'syncconfig' - add unit-test framework and several test cases - warn unmet dependency of tristate symbols - make unmet dependency warnings readable, removing false positives - improve recursive include detection - use yylineno to simplify the line number tracking - misc cleanups * tag 'kconfig-v4.17' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (30 commits) kconfig: use yylineno option instead of manual lineno increments kconfig: detect recursive inclusion earlier kconfig: remove duplicated file name and lineno of recursive inclusion kconfig: do not include both curses.h and ncurses.h for nconfig kconfig: make unmet dependency warnings readable kconfig: warn unmet direct dependency of tristate symbols selected by y kconfig: tests: test if recursive inclusion is detected kconfig: tests: test if recursive dependencies are detected kconfig: tests: test randconfig for choice in choice kconfig: tests: test defconfig when two choices interact kconfig: tests: check visibility of tristate choice values in y choice kconfig: tests: check unneeded "is not set" with unmet dependency kconfig: tests: test if new symbols in choice are asked kconfig: tests: test automatic submenu creation kconfig: tests: add basic choice tests kconfig: tests: add framework for Kconfig unit testing kbuild: add PYTHON2 and PYTHON3 variables kconfig: remove redundant streamline_config.pl prerequisite kconfig: rename silentoldconfig to syncconfig kconfig: invoke oldconfig instead of silentoldconfig from local*config ...
2018-04-04Merge tag 'kbuild-v4.17' of ↵Linus Torvalds1-40/+49
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild Pull Kbuild updates from Masahiro Yamada: - add a shell script to get Clang version - improve portability of build scripts - drop always-enabled CONFIG_THIN_ARCHIVE and remove unused code - rename built-in.o which is now thin archive to built-in.a - process clean/build targets one by one to get along with -j option - simplify ld-option - improve building with CONFIG_TRIM_UNUSED_KSYMS - define KBUILD_MODNAME even for objects shared among multiple modules - avoid linking multiple instances of same objects from composite objects - move <linux/compiler_types.h> to c_flags to include it only for C files - clean-up various Makefiles * tag 'kbuild-v4.17' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (29 commits) kbuild: get <linux/compiler_types.h> out of <linux/kconfig.h> kbuild: clean up link rule of composite modules kbuild: clean up archive rule of built-in.a kbuild: remove partial section mismatch detection for built-in.a net: liquidio: clean up Makefile for simpler composite object handling lib: zstd: clean up Makefile for simpler composite object handling kbuild: link $(real-obj-y) instead of $(obj-y) into built-in.a kbuild: rename real-objs-y/m to real-obj-y/m kbuild: move modname and modname-multi close to modname_flags kbuild: simplify modname calculation kbuild: fix modname for composite modules kbuild: define KBUILD_MODNAME even if multiple modules share objects kbuild: remove unnecessary $(subst $(obj)/, , ...) in modname-multi kbuild: Use ls(1) instead of stat(1) to obtain file size kbuild: link vmlinux only once for CONFIG_TRIM_UNUSED_KSYMS kbuild: move include/config/ksym/* to include/ksym/* kbuild: move CONFIG_TRIM_UNUSED_KSYMS code unneeded for external module kbuild: restore autoksyms.h touch to the top Makefile kbuild: move 'scripts' target below kbuild: remove wrong 'touch' in adjust_autoksyms.sh ...
2018-04-03Merge tag 'arch-removal' of ↵Linus Torvalds1-8/+0
git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic Pul removal of obsolete architecture ports from Arnd Bergmann: "This removes the entire architecture code for blackfin, cris, frv, m32r, metag, mn10300, score, and tile, including the associated device drivers. I have been working with the (former) maintainers for each one to ensure that my interpretation was right and the code is definitely unused in mainline kernels. Many had fond memories of working on the respective ports to start with and getting them included in upstream, but also saw no point in keeping the port alive without any users. In the end, it seems that while the eight architectures are extremely different, they all suffered the same fate: There was one company in charge of an SoC line, a CPU microarchitecture and a software ecosystem, which was more costly than licensing newer off-the-shelf CPU cores from a third party (typically ARM, MIPS, or RISC-V). It seems that all the SoC product lines are still around, but have not used the custom CPU architectures for several years at this point. In contrast, CPU instruction sets that remain popular and have actively maintained kernel ports tend to all be used across multiple licensees. [ See the new nds32 port merged in the previous commit for the next generation of "one company in charge of an SoC line, a CPU microarchitecture and a software ecosystem" - Linus ] The removal came out of a discussion that is now documented at https://lwn.net/Articles/748074/. Unlike the original plans, I'm not marking any ports as deprecated but remove them all at once after I made sure that they are all unused. Some architectures (notably tile, mn10300, and blackfin) are still being shipped in products with old kernels, but those products will never be updated to newer kernel releases. After this series, we still have a few architectures without mainline gcc support: - unicore32 and hexagon both have very outdated gcc releases, but the maintainers promised to work on providing something newer. At least in case of hexagon, this will only be llvm, not gcc. - openrisc, risc-v and nds32 are still in the process of finishing their support or getting it added to mainline gcc in the first place. They all have patched gcc-7.3 ports that work to some degree, but complete upstream support won't happen before gcc-8.1. Csky posted their first kernel patch set last week, their situation will be similar [ Palmer Dabbelt points out that RISC-V support is in mainline gcc since gcc-7, although gcc-7.3.0 is the recommended minimum - Linus ]" This really says it all: 2498 files changed, 95 insertions(+), 467668 deletions(-) * tag 'arch-removal' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic: (74 commits) MAINTAINERS: UNICORE32: Change email account staging: iio: remove iio-trig-bfin-timer driver tty: hvc: remove tile driver tty: remove bfin_jtag_comm and hvc_bfin_jtag drivers serial: remove tile uart driver serial: remove m32r_sio driver serial: remove blackfin drivers serial: remove cris/etrax uart drivers usb: Remove Blackfin references in USB support usb: isp1362: remove blackfin arch glue usb: musb: remove blackfin port usb: host: remove tilegx platform glue pwm: remove pwm-bfin driver i2c: remove bfin-twi driver spi: remove blackfin related host drivers watchdog: remove bfin_wdt driver can: remove bfin_can driver mmc: remove bfin_sdh driver input: misc: remove blackfin rotary driver input: keyboard: remove bf54x driver ...
2018-04-03Merge branch 'x86-build-for-linus' of ↵Linus Torvalds1-6/+7
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 build updates from Ingo Molnar: "The biggest change is the forcing of asm-goto support on x86, which effectively increases the GCC minimum supported version to gcc-4.5 (on x86)" * 'x86-build-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/build: Don't pass in -D__KERNEL__ multiple times x86: Remove FAST_FEATURE_TESTS x86: Force asm-goto x86/build: Drop superfluous ALIGN from the linker script
2018-04-02Linux 4.16v4.16Linus Torvalds1-1/+1
2018-03-31Merge tag 'kbuild-fixes-v4.16-3' of ↵Linus Torvalds1-2/+2
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild Pull Kbuild fixes from Masahiro Yamada: - fix missed rebuild of TRIM_UNUSED_KSYMS - fix rpm-pkg for GNU tar >= 1.29 - include scripts/dtc/include-prefixes/* to kernel header deb-pkg - add -no-integrated-as option ealier to fix building with Clang - fix netfilter Makefile for parallel building * tag 'kbuild-fixes-v4.16-3' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: netfilter: nf_nat_snmp_basic: add correct dependency to Makefile kbuild: rpm-pkg: Support GNU tar >= 1.29 builddeb: Fix header package regarding dtc source links kbuild: set no-integrated-as before incl. arch Makefile kbuild: make scripts/adjust_autoksyms.sh robust against timestamp races
2018-03-26Linux 4.16-rc7v4.16-rc7Linus Torvalds1-1/+1
2018-03-25kbuild: add PYTHON2 and PYTHON3 variablesMasahiro Yamada1-1/+3
The variable 'PYTHON' allows users to specify a proper executable name in case the default 'python' does not work. However, this does not address the case where both Python 2.x and 3.x scripts are used in one source tree. PEP 394 (https://www.python.org/dev/peps/pep-0394/) provides a convention for Python scripts portability. Here is a quotation: In order to tolerate differences across platforms, all new code that needs to invoke the Python interpreter should not specify 'python', but rather should specify either 'python2' or 'python3'. This distinction should be made in shebangs, when invoking from a shell script, when invoking via the system() call, or when invoking in any other context. One exception to this is scripts that are deliberately written to be source compatible with both Python 2.x and 3.x. Such scripts may continue to use python on their shebang line without affecting their portability. To meet this requirement, this commit adds new variables 'PYTHON2' and 'PYTHON3'. arch/ia64/scripts/unwcheck.py is the only script that has ever used $(PYTHON). Recent commit bd5edbe67794 ("ia64: convert unwcheck.py to python3") converted it to be compatible with both Python 2.x and 3.x, so this is the exceptional case where the use of 'python' is allowed. So, I did not touch arch/ia64/Makefile. tools/perf/Makefile.config sets PYTHON and PYTHON2 by itself, so it is not affected by this commit. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-03-25kconfig: rename silentoldconfig to syncconfigMasahiro Yamada1-1/+1
As commit cedd55d49dee ("kconfig: Remove silentoldconfig from help and docs; fix kconfig/conf's help") mentioned, 'silentoldconfig' is a historical misnomer. That commit removed it from help and docs since it is an internal interface. If so, it should be allowed to rename it to something more intuitive. 'syncconfig' is the one I came up with because it updates the .config if necessary, then synchronize include/generated/autoconf.h and include/config/* with it. You should not manually invoke 'silentoldcofig'. Display warning if used in case existing scripts are doing wrong. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: Ulf Magnusson <ulfalizer@gmail.com>
2018-03-25kbuild: link vmlinux only once for CONFIG_TRIM_UNUSED_KSYMSMasahiro Yamada1-12/+10
If CONFIG_TRIM_UNUSED_KSYMS is enabled and the kernel is built from a pristine state, the vmlinux is linked twice. [1] A user runs 'make' [2] First build with empty autoksyms.h [3] adjust_autoksyms.sh updates autoksyms.h and recurses 'make vmlinux' --------(begin sub-make)-------- [4] Second build with new autoksyms.h [5] link-vmlinux.sh is invoked because vmlinux is missing ---------(end sub-make)--------- [6] link-vmlinux.sh is invoked again despite vmlinux is up-to-date. The reason of [6] is probably because Make already decided to update vmlinux at the time of [2] because vmlinux was missing when Make built up the dependency graph. Because if_changed is implemented based on $?, this issue can be narrowed down to how Make handles $?. You can test it with the following simple code: [Test Makefile] A: B @echo newer prerequisite: $? cp B A B: C cp C B touch A [Result] $ rm -f A B $ touch C $ make cp C B touch A newer prerequisite: B cp B A Here, 'A' has been touched in the recipe of 'B'. So, the dependency 'A: B' has already been met before the recipe of 'A' is executed. However, Make does not notice the fact that the recipe of 'B' also updates 'A' as a side-effect. The situation is similar in this case; the vmlinux has actually been updated in the vmlinux_prereq target. Make cannot predict this, so judges the vmlinux is old. link-vmlinux.sh is costly, so it is better to not run it when unneeded. Split CONFIG_TRIM_UNUSED_KSYMS recursion to a dedicated target. The reason of commit 2441e78b1919 ("kbuild: better abstract vmlinux sequential prerequisites") was to cater to CONFIG_BUILD_DOCSRC, but it was later removed by commit 184892925118 ("samples: move blackfin gptimers-example from Documentation"). Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Acked-by: Nicolas Pitre <nico@linaro.org>
2018-03-25kbuild: move include/config/ksym/* to include/ksym/*Masahiro Yamada1-1/+1
The idea of using fixdep was inspired by Kconfig, but autoksyms belongs to a different group. So, I want to move those touched files under include/config/ksym/ to include/ksym/. The directory include/ksym/ can be removed by 'make clean' because it is meaningless for the external module building. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Acked-by: Nicolas Pitre <nico@linaro.org>
2018-03-25kbuild: move CONFIG_TRIM_UNUSED_KSYMS code unneeded for external moduleMasahiro Yamada1-7/+7
The external module building does not need to parse this code because KBUILD_MODULES is always set anyway. Move this code inside the "ifeq ($(KBUILD_EXTMOD),) ... endif" block. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Acked-by: Nicolas Pitre <nico@linaro.org>
2018-03-25kbuild: restore autoksyms.h touch to the top MakefileMasahiro Yamada1-5/+7
Commit d3fc425e819b ("kbuild: make sure autoksyms.h exists early") moved the code that touches autoksyms.h to scripts/kconfig/Makefile with obscure reason. From Nicolas' comment [1], he did not seem to be sure about the root cause. I guess I figured it out, so here is a fix-up I think is more correct. According to the error log in the original post [2], the build failed in scripts/mod/devicetable-offsets.c scripts/mod/Makefile is descended from scripts/Makefile, which is invoked from the top-level Makefile by the 'scripts' target. To build vmlinux and/or modules, Kbuild descend into $(vmlinux-dirs). This depends on 'prepare' and 'scripts' as follows: $(vmlinux-dirs): prepare scripts Because there is no dependency between 'prepare' and 'scripts', the parallel building can execute them simultaneously. 'prepare' depends on 'prepare1', which touched autoksyms.h, while 'scripts' descends into script/, then scripts/mod/, which needs <generated/autoksyms.h> if CONFIG_TRIM_UNUSED_KSYMS. It was the reason of the race. I am not happy to have unrelated code in the Kconfig Makefile, so getting it back to the top Makefile. I removed the standalone test target because I want to use it to create an empty autoksyms.h file. Here is a little improvement; unnecessary autoksyms.h is not created when CONFIG_TRIM_UNUSED_KSYMS is disabled. [1] https://lkml.org/lkml/2016/11/30/734 [2] https://lkml.org/lkml/2016/11/30/531 Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Acked-by: Nicolas Pitre <nico@linaro.org>
2018-03-25kbuild: move 'scripts' target belowMasahiro Yamada1-8/+7
Just a trivial change to prepare for the next commit. This target is still invisible from external module building. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-03-25kbuild: clear LDFLAGS in the top MakefileMasahiro Yamada1-0/+1
Currently LDFLAGS is not cleared, so same flags are accumulated in LDFLAGS when the top Makefile is recursively invoked. I found unneeded rebuild for ARCH=arm64 when CONFIG_TRIM_UNUSED_KSYMS is enabled. If include/generated/autoksyms.h is updated, the top Makefile is recursively invoked, then arch/arm64/Makefile adds one more '-maarch64linux'. Due to the command line change, modules are rebuilt needlessly. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Acked-by: Nicolas Pitre <nico@linaro.org>
2018-03-25kbuild: process mixture of clean/build targets one by oneMasahiro Yamada1-1/+10
Support parallel building of clean, config, and build targets in a single command. For example, make -j<N> clean all or make -j<N> mrproper defconfig all They should be handled one by one. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-03-25kbuild: rename built-in.o to built-in.aNicholas Piggin1-7/+7
Incremental linking is gone, so rename built-in.o to built-in.a, which is the usual extension for archive files. This patch does two things, first is a simple search/replace: git grep -l 'built-in\.o' | xargs sed -i 's/built-in\.o/built-in\.a/g' The second is to invert nesting of nested text manipulations to avoid filtering built-in.a out from libs-y2: -libs-y2 := $(filter-out %.a, $(patsubst %/, %/built-in.a, $(libs-y))) +libs-y2 := $(patsubst %/, %/built-in.a, $(filter-out %.a, $(libs-y))) Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-03-23Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds1-0/+9
Pull networking fixes from David Miller: 1) Always validate XFRM esn replay attribute, from Florian Westphal. 2) Fix RCU read lock imbalance in xfrm_get_tos(), from Xin Long. 3) Don't try to get firmware dump if not loaded in iwlwifi, from Shaul Triebitz. 4) Fix BPF helpers to deal with SCTP GSO SKBs properly, from Daniel Axtens. 5) Fix some interrupt handling issues in e1000e driver, from Benjamin Poitier. 6) Use strlcpy() in several ethtool get_strings methods, from Florian Fainelli. 7) Fix rhlist dup insertion, from Paul Blakey. 8) Fix SKB leak in netem packet scheduler, from Alexey Kodanev. 9) Fix driver unload crash when link is up in smsc911x, from Jeremy Linton. 10) Purge out invalid socket types in l2tp_tunnel_create(), from Eric Dumazet. 11) Need to purge the write queue when TCP connections are aborted, otherwise userspace using MSG_ZEROCOPY can't close the fd. From Soheil Hassas Yeganeh. 12) Fix double free in error path of team driver, from Arkadi Sharshevsky. 13) Filter fixes for hv_netvsc driver, from Stephen Hemminger. 14) Fix non-linear packet access in ipv6 ndisc code, from Lorenzo Bianconi. 15) Properly filter out unsupported feature flags in macvlan driver, from Shannon Nelson. 16) Don't request loading the diag module for a protocol if the protocol itself is not even registered. From Xin Long. 17) If datagram connect fails in ipv6, make sure the socket state is consistent afterwards. From Paolo Abeni. 18) Use after free in qed driver, from Dan Carpenter. 19) If received ipv4 PMTU is less than the min pmtu, lock the mtu in the entry. From Sabrina Dubroca. 20) Fix sleep in atomic in tg3 driver, from Jonathan Toppins. 21) Fix vlan in vlan untagging in some situations, from Toshiaki Makita. 22) Fix double SKB free in genlmsg_mcast(). From Nicolas Dichtel. 23) Fix NULL derefs in error paths of tcf_*_init(), from Davide Caratti. 24) Unbalanced PM runtime calls in FEC driver, from Florian Fainelli. 25) Memory leak in gemini driver, from Igor Pylypiv. 26) IDR leaks in error paths of tcf_*_init() functions, from Davide Caratti. 27) Need to use GFP_ATOMIC in seg6_build_state(), from David Lebrun. 28) Missing dev_put() in error path of macsec_newlink(), from Dan Carpenter. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (201 commits) macsec: missing dev_put() on error in macsec_newlink() net: dsa: Fix functional dsa-loop dependency on FIXED_PHY hv_netvsc: common detach logic hv_netvsc: change GPAD teardown order on older versions hv_netvsc: use RCU to fix concurrent rx and queue changes hv_netvsc: disable NAPI before channel close net/ipv6: Handle onlink flag with multipath routes ppp: avoid loop in xmit recursion detection code ipv6: sr: fix NULL pointer dereference when setting encap source address ipv6: sr: fix scheduling in RCU when creating seg6 lwtunnel state net: aquantia: driver version bump net: aquantia: Implement pci shutdown callback net: aquantia: Allow live mac address changes net: aquantia: Add tx clean budget and valid budget handling logic net: aquantia: Change inefficient wait loop on fw data reads net: aquantia: Fix a regression with reset on old firmware net: aquantia: Fix hardware reset when SPI may rarely hangup s390/qeth: on channel error, reject further cmd requests s390/qeth: lock read device while queueing next buffer s390/qeth: when thread completes, wake up all waiters ...
2018-03-21kbuild: set no-integrated-as before incl. arch MakefileStefan Agner1-2/+2
In order to make sure compiler flag detection for ARM works correctly the no-integrated-as flags need to be set before including the arch specific Makefile. Fixes: cfe17c9bbe6a ("kbuild: move cc-option and cc-disable-warning after incl. arch Makefile") Signed-off-by: Stefan Agner <stefan@agner.ch> Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-03-21kbuild: disable clang's default use of -fmerge-all-constantsDaniel Borkmann1-0/+9
Prasad reported that he has seen crashes in BPF subsystem with netd on Android with arm64 in the form of (note, the taint is unrelated): [ 4134.721483] Unable to handle kernel paging request at virtual address 800000001 [ 4134.820925] Mem abort info: [ 4134.901283] Exception class = DABT (current EL), IL = 32 bits [ 4135.016736] SET = 0, FnV = 0 [ 4135.119820] EA = 0, S1PTW = 0 [ 4135.201431] Data abort info: [ 4135.301388] ISV = 0, ISS = 0x00000021 [ 4135.359599] CM = 0, WnR = 0 [ 4135.470873] user pgtable: 4k pages, 39-bit VAs, pgd = ffffffe39b946000 [ 4135.499757] [0000000800000001] *pgd=0000000000000000, *pud=0000000000000000 [ 4135.660725] Internal error: Oops: 96000021 [#1] PREEMPT SMP [ 4135.674610] Modules linked in: [ 4135.682883] CPU: 5 PID: 1260 Comm: netd Tainted: G S W 4.14.19+ #1 [ 4135.716188] task: ffffffe39f4aa380 task.stack: ffffff801d4e0000 [ 4135.731599] PC is at bpf_prog_add+0x20/0x68 [ 4135.741746] LR is at bpf_prog_inc+0x20/0x2c [ 4135.751788] pc : [<ffffff94ab7ad584>] lr : [<ffffff94ab7ad638>] pstate: 60400145 [ 4135.769062] sp : ffffff801d4e3ce0 [...] [ 4136.258315] Process netd (pid: 1260, stack limit = 0xffffff801d4e0000) [ 4136.273746] Call trace: [...] [ 4136.442494] 3ca0: ffffff94ab7ad584 0000000060400145 ffffffe3a01bf8f8 0000000000000006 [ 4136.460936] 3cc0: 0000008000000000 ffffff94ab844204 ffffff801d4e3cf0 ffffff94ab7ad584 [ 4136.479241] [<ffffff94ab7ad584>] bpf_prog_add+0x20/0x68 [ 4136.491767] [<ffffff94ab7ad638>] bpf_prog_inc+0x20/0x2c [ 4136.504536] [<ffffff94ab7b5d08>] bpf_obj_get_user+0x204/0x22c [ 4136.518746] [<ffffff94ab7ade68>] SyS_bpf+0x5a8/0x1a88 Android's netd was basically pinning the uid cookie BPF map in BPF fs (/sys/fs/bpf/traffic_cookie_uid_map) and later on retrieving it again resulting in above panic. Issue is that the map was wrongly identified as a prog! Above kernel was compiled with clang 4.0, and it turns out that clang decided to merge the bpf_prog_iops and bpf_map_iops into a single memory location, such that the two i_ops could then not be distinguished anymore. Reason for this miscompilation is that clang has the more aggressive -fmerge-all-constants enabled by default. In fact, clang source code has a comment about it in lib/AST/ExprConstant.cpp on why it is okay to do so: Pointers with different bases cannot represent the same object. (Note that clang defaults to -fmerge-all-constants, which can lead to inconsistent results for comparisons involving the address of a constant; this generally doesn't matter in practice.) The issue never appeared with gcc however, since gcc does not enable -fmerge-all-constants by default and even *explicitly* states in it's option description that using this flag results in non-conforming behavior, quote from man gcc: Languages like C or C++ require each variable, including multiple instances of the same variable in recursive calls, to have distinct locations, so using this option results in non-conforming behavior. There are also various clang bug reports open on that matter [1], where clang developers acknowledge the non-conforming behavior, and refer to disabling it with -fno-merge-all-constants. But even if this gets fixed in clang today, there are already users out there that triggered this. Thus, fix this issue by explicitly adding -fno-merge-all-constants to the kernel's Makefile to generically disable this optimization, since potentially other places in the kernel could subtly break as well. Note, there is also a flag called -fmerge-constants (not supported by clang), which is more conservative and only applies to strings and it's enabled in gcc's -O/-O2/-O3/-Os optimization levels. In gcc's code, the two flags -fmerge-{all-,}constants share the same variable internally, so when disabling it via -fno-merge-all-constants, then we really don't merge any const data (e.g. strings), and text size increases with gcc (14,927,214 -> 14,942,646 for vmlinux.o). $ gcc -fverbose-asm -O2 foo.c -S -o foo.S -> foo.S lists -fmerge-constants under options enabled $ gcc -fverbose-asm -O2 -fno-merge-all-constants foo.c -S -o foo.S -> foo.S doesn't list -fmerge-constants under options enabled $ gcc -fverbose-asm -O2 -fno-merge-all-constants -fmerge-constants foo.c -S -o foo.S -> foo.S lists -fmerge-constants under options enabled Thus, as a workaround we need to set both -fno-merge-all-constants *and* -fmerge-constants in the Makefile in order for text size to stay as is. [1] https://bugs.llvm.org/show_bug.cgi?id=18538 Reported-by: Prasad Sodagudi <psodagud@codeaurora.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Chenbo Feng <fengc@google.com> Cc: Richard Smith <richard-llvm@metafoo.co.uk> Cc: Chandler Carruth <chandlerc@gmail.com> Cc: linux-kernel@vger.kernel.org Tested-by: Prasad Sodagudi <psodagud@codeaurora.org> Acked-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2018-03-20x86: Force asm-gotoPeter Zijlstra1-6/+7
We want to start using asm-goto to guarantee the absence of dynamic branches (and thus speculation). A primary prerequisite for this is of course that the compiler supports asm-goto. This effecively lifts the minimum GCC version to build an x86 kernel to gcc-4.5. Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: torvalds@linux-foundation.org Link: https://lkml.kernel.org/r/20180319201327.GJ4043@hirez.programming.kicks-ass.net