| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Add architecture specific implementation details for KFENCE and enable
KFENCE on ARM. In particular, this implements the required interface in
<asm/kfence.h>.
KFENCE requires that attributes for pages from its memory pool can
individually be set. Therefore, force the kfence pool to be mapped
at page granularity.
Testing this patch using the testcases in kfence_test.c and all passed
with or without ARM_LPAE.
Acked-by: Marco Elver <elver@google.com>
Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
|
|
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
Enable support for IRQ stacks on !MMU, and add the code to the IRQ entry
path to switch to the IRQ stack if not running from it already.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Tested-by: Marc Zyngier <maz@kernel.org>
Tested-by: Vladimir Murzin <vladimir.murzin@arm.com> # ARMv7M
|
|
On UP systems, only a single task can be 'current' at the same time,
which means we can use a global variable to track it. This means we can
also enable THREAD_INFO_IN_TASK for those systems, as in that case,
thread_info is accessed via current rather than the other way around,
removing the need to store thread_info at the base of the task stack.
This, in turn, permits us to enable IRQ stacks and vmap'ed stacks on UP
systems as well.
To partially mitigate the performance overhead of this arrangement, use
a ADD/ADD/LDR sequence with the appropriate PC-relative group
relocations to load the value of current when needed. This means that
accessing current will still only require a single load as before,
avoiding the need for a literal to carry the address of the global
variable in each function. However, accessing thread_info will now
require this load as well.
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Nicolas Pitre <nico@fluxnic.net>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Tested-by: Marc Zyngier <maz@kernel.org>
Tested-by: Vladimir Murzin <vladimir.murzin@arm.com> # ARMv7M
|
|
Enable the use of the TLS register to hold the 'current' pointer also on
non-SMP configurations that target v6k or later CPUs. This will permit
the use of THREAD_INFO_IN_TASK as well as IRQ stacks and vmap'ed stacks
for such configurations.
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Nicolas Pitre <nico@fluxnic.net>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Tested-by: Marc Zyngier <maz@kernel.org>
Tested-by: Vladimir Murzin <vladimir.murzin@arm.com> # ARMv7M
|
|
The last user of arch_irq_handler_default is gone now, so the
entry-macro-multi.S file and all references to mach/entry-macro.S can
be removed, as well as the asm_do_IRQ() entrypoint into the interrupt
handling routines implemented in C.
Note: The ARMv7-M entry still uses its own top-level IRQ entry, calling
nvic_handle_irq() from assembly. This could be changed to go through
generic_handle_arch_irq() as well, but it's unclear to me if there are
any benefits.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
[ardb: keep irq_handler macro as it carries all the IRQ stack handling]
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Tested-by: Marc Zyngier <maz@kernel.org>
Tested-by: Vladimir Murzin <vladimir.murzin@arm.com> # ARMv7M
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
|
|
iop32x uses the entry-macro.S file for both the IRQ entry and for
hooking into the arch_ret_to_user code path. This is done because the
cp6 registers have to be enabled before accessing any of the interrupt
controller registers but have to be disabled when running in user space.
There is also a lazy-enable logic in cp6.c, but during a hardirq, we
know it has to be enabled.
Both the cp6-enable code and the code to read the IRQ status can be
lifted into the normal generic_handle_arch_irq() path, but the
cp6-disable code has to remain in the user return code. As nothing
other than iop32x uses this hook, just open-code it there with an
ifdef for the platform that can eventually be removed when iop32x
has reached the end of its life.
The cp6-enable path in the IRQ entry has an extra cp_wait barrier that
the trap version does not have, but it is harmless to do it in both
cases to simplify the logic here at the cost of a few extra cycles
for the trap.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Tested-by: Marc Zyngier <maz@kernel.org>
Tested-by: Vladimir Murzin <vladimir.murzin@arm.com> # ARMv7M
|
|
Footbridge still uses the classic IRQ entry path in assembler,
but this is easily converted into an equivalent C version.
In this case, the correlation between IRQ numbers and bits in
the status register is non-obvious, and the priorities are
handled by manually checking each bit in a static order,
re-reading the status register after each handled event.
I moved the code into the new file and edited the syntax without
changing this sequence to keep the behavior as close as possible
to what it traditionally did.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Tested-by: Marc Zyngier <maz@kernel.org>
Tested-by: Vladimir Murzin <vladimir.murzin@arm.com> # ARMv7M
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
|
|
This is one of the last platforms using the old entry path.
While this code path is spread over a few files, it is fairly
straightforward to convert it into an equivalent C version,
leaving the existing algorithm and all the priority handling
the same.
Unlike most irqchip drivers, this means reading the status
register(s) in a loop and always handling the highest-priority
irq first.
The IOMD_IRQREQC and IOMD_IRQREQD registers are not actaully
used here, but I left the code in place for the time being,
to keep the conversion as direct as possible. It could be
removed in a cleanup on top.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
[ardb: drop obsolete IOMD_IRQREQC/IOMD_IRQREQD handling]
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Tested-by: Marc Zyngier <maz@kernel.org>
Tested-by: Vladimir Murzin <vladimir.murzin@arm.com> # ARMv7M
|
|
Wire up the generic support for managing task stack allocations via vmalloc,
and implement the entry code that detects whether we faulted because of a
stack overrun (or future stack overrun caused by pushing the pt_regs array)
While this adds a fair amount of tricky entry asm code, it should be
noted that it only adds a TST + branch to the svc_entry path. The code
implementing the non-trivial handling of the overflow stack is emitted
out-of-line into the .text section.
Since on ARM, we rely on do_translation_fault() to keep PMD level page
table entries that cover the vmalloc region up to date, we need to
ensure that we don't hit such a stale PMD entry when accessing the
stack. So we do a dummy read from the new stack while still running from
the old one on the context switch path, and bump the vmalloc_seq counter
when PMD level entries in the vmalloc range are modified, so that the MM
switch fetches the latest version of the entries.
Note that we need to increase the per-mode stack by 1 word, to gain some
space to stash a GPR until we know it is safe to touch the stack.
However, due to the cacheline alignment of the struct, this does not
actually increase the memory footprint of the struct stack array at all.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Tested-by: Keith Packard <keithpac@amazon.com>
Tested-by: Marc Zyngier <maz@kernel.org>
Tested-by: Vladimir Murzin <vladimir.murzin@arm.com> # ARMv7M
|
|
Now that we have enabled IRQ stacks, any softIRQs that are handled over
the back of a hard IRQ will run from the IRQ stack as well. However, any
synchronous softirq processing that happens when re-enabling softIRQs
from task context will still execute on that task's stack.
Since any call to local_bh_enable() at any level in the task's call
stack may trigger a softIRQ processing run, which could potentially
cause a task stack overflow if the combined stack footprints exceed the
stack's size, let's run these synchronous invocations of do_softirq() on
the IRQ stack as well.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Tested-by: Keith Packard <keithpac@amazon.com>
Tested-by: Marc Zyngier <maz@kernel.org>
Tested-by: Vladimir Murzin <vladimir.murzin@arm.com> # ARMv7M
|
|
Now that we no longer rely on the stack pointer to access the current
task struct or thread info, we can implement support for IRQ stacks
cleanly as well.
Define a per-CPU IRQ stack and switch to this stack when taking an IRQ,
provided that we were not already using that stack in the interrupted
context. This is never the case for IRQs taken from user space, but ones
taken while running in the kernel could fire while one taken from user
space has not completed yet.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Tested-by: Keith Packard <keithpac@amazon.com>
Acked-by: Nick Desaulniers <ndesaulniers@google.com>
Tested-by: Marc Zyngier <maz@kernel.org>
Tested-by: Vladimir Murzin <vladimir.murzin@arm.com> # ARMv7M
|
|
Currently, we implement the per-task stack protector for ARM using a GCC
plugin, due to lack of native compiler support. However, work is
underway to get this implemented in the compiler, which means we will be
able to deprecate the GCC plugin at some point.
In the meantime, we will need to support both, where the native compiler
implementation is obviously preferred. So let's wire this up in Kconfig
and the Makefile.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Tested-by: Marc Zyngier <maz@kernel.org>
Tested-by: Vladimir Murzin <vladimir.murzin@arm.com> # ARMv7M
|
|
Now that all architectures have a working futex implementation in any
configuration, remove the runtime detection code.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Acked-by: Vineet Gupta <vgupta@kernel.org>
Acked-by: Max Filippov <jcmvbkbc@gmail.com>
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Link: https://lore.kernel.org/r/20211026100432.1730393-2-arnd@kernel.org
|
|
A separate Kconfig option HAVE_S3C2410_I2C for Samsung SoCs is not
really needed and the i2c-s3c24xx driver can depend on Samsung ARM
architectures instead. This also enables i2c-s3c2410 for arm64 Exynos
SoCs, which is required for example by Exynos850.
This is basically continuation of work made in following commits:
- commit d96890fca9fd ("rtc: s3c: remove HAVE_S3C_RTC in favor of
direct dependencies")
- commit 7dd3cae90d85 ("ARM: samsung: remove HAVE_S3C2410_WATCHDOG and
use direct dependencies")
Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org>
Link: https://lore.kernel.org/r/20211121150558.21801-2-semen.protsenko@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
|
|
The kmap_local conversion broke the ARM architecture, because the new
code assumes that all PTEs used for creating kmaps form a linear array
in memory, and uses array indexing to look up the kmap PTE belonging to
a certain kmap index.
On ARM, this cannot work, not only because the PTE pages may be
non-adjacent in memory, but also because ARM/!LPAE interleaves hardware
entries and extended entries (carrying software-only bits) in a way that
is not compatible with array indexing.
Fortunately, this only seems to affect configurations with more than 8
CPUs, due to the way the per-CPU kmap slots are organized in memory.
Work around this by permitting an architecture to set a Kconfig symbol
that signifies that the kmap PTEs do not form a lineary array in memory,
and so the only way to locate the appropriate one is to walk the page
tables.
Link: https://lore.kernel.org/linux-arm-kernel/20211026131249.3731275-1-ardb@kernel.org/
Link: https://lkml.kernel.org/r/20211116094737.7391-1-ardb@kernel.org
Fixes: 2a15ba82fa6c ("ARM: highmem: Switch to generic kmap atomic")
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Reported-by: Quanyang Wang <quanyang.wang@windriver.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC driver updates from Arnd Bergmann:
"These are all the driver updates for SoC specific drivers. There are a
couple of subsystems with individual maintainers picking up their
patches here:
- The reset controller subsystem add support for a few new SoC
variants to existing drivers, along with other minor improvements
- The OP-TEE subsystem gets a driver for the ARM FF-A transport
- The memory controller subsystem has improvements for Tegra,
Mediatek, Renesas, Freescale and Broadcom specific drivers.
- The tegra cpuidle driver changes get merged through this tree this
time. There are only minor changes, but they depend on other tegra
driver updates here.
- The ep93xx platform finally moves to using the drivers/clk/
subsystem, moving the code out of arch/arm in the process. This
depends on a small sound driver change that is included here as
well.
- There are some minor updates for Qualcomm and Tegra specific
firmware drivers.
The other driver updates are mainly for drivers/soc, which contains a
mixture of vendor specific drivers that don't really fit elsewhere:
- Mediatek drivers gain more support for MT8192, with new support for
hw-mutex and mmsys routing, plus support for reset lines in the
mmsys driver.
- Qualcomm gains a new "sleep stats" driver, and support for the
"Generic Packet Router" in the APR driver.
- There is a new user interface for routing the UARTS on ASpeed BMCs,
something that apparently nobody else has needed so far.
- More drivers can now be built as loadable modules, in particular
for Broadcom and Samsung platforms.
- Lots of improvements to the TI sysc driver for better
suspend/resume support"
Finally, there are lots of minor cleanups and new device IDs for
amlogic, renesas, tegra, qualcomm, mediateka, samsung, imx,
layerscape, allwinner, broadcom, and omap"
* tag 'drivers-5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (179 commits)
optee: Fix spelling mistake "reclain" -> "reclaim"
Revert "firmware: qcom: scm: Add support for MC boot address API"
qcom: spm: allow compile-testing
firmware: arm_ffa: Remove unused 'compat_version' variable
soc: samsung: exynos-chipid: add exynosautov9 SoC support
firmware: qcom: scm: Don't break compile test on non-ARM platforms
soc: qcom: smp2p: Add of_node_put() before goto
soc: qcom: apr: Add of_node_put() before return
soc: qcom: qcom_stats: Fix client votes offset
soc: qcom: rpmhpd: fix sm8350_mxc's peer domain
dt-bindings: arm: cpus: Document qcom,msm8916-smp enable-method
ARM: qcom: Add qcom,msm8916-smp enable-method identical to MSM8226
firmware: qcom: scm: Add support for MC boot address API
soc: qcom: spm: Add 8916 SPM register data
dt-bindings: soc: qcom: spm: Document qcom,msm8916-saw2-v3.0-cpu
soc: qcom: socinfo: Add PM8150C and SMB2351 models
firmware: qcom_scm: Fix error retval in __qcom_scm_is_call_available()
soc: aspeed: Add UART routing support
soc: fsl: dpio: rename the enqueue descriptor variable
soc: fsl: dpio: use an explicit NULL instead of 0
...
|
|
Pull ARM updates from Russell King:
- Rejig task/thread info to place thread info in task struct
- Amba bus cleanups (removing unused functions)
- Handle Amba device probe without IRQ domains
- Parse linux,usable-memory-range in decompressor
- Mark OCRAM as read-only after initialisation
- Refactor page fault handling
- Fix PXN handling with LPAE kernels
- Warning and build fixes from Arnd
* tag 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm: (32 commits)
ARM: 9151/1: Thumb2: avoid __builtin_thread_pointer() on Clang
ARM: 9150/1: Fix PID_IN_CONTEXTIDR regression when THREAD_INFO_IN_TASK=y
ARM: 9147/1: add printf format attribute to early_print()
ARM: 9146/1: RiscPC needs older gcc version
ARM: 9145/1: patch: fix BE32 compilation
ARM: 9144/1: forbid ftrace with clang and thumb2_kernel
ARM: 9143/1: add CONFIG_PHYS_OFFSET default values
ARM: 9142/1: kasan: work around LPAE build warning
ARM: 9140/1: allow compile-testing without machine record
ARM: 9137/1: disallow CONFIG_THUMB with ARMv4
ARM: 9136/1: ARMv7-M uses BE-8, not BE-32
ARM: 9135/1: kprobes: address gcc -Wempty-body warning
ARM: 9101/1: sa1100/assabet: convert LEDs to gpiod APIs
ARM: 9131/1: mm: Fix PXN process with LPAE feature
ARM: 9130/1: mm: Provide die_kernel_fault() helper
ARM: 9126/1: mm: Kill page table base print in show_pte()
ARM: 9127/1: mm: Cleanup access_error()
ARM: 9129/1: mm: Kill task_struct argument for __do_page_fault()
ARM: 9128/1: mm: Refactor the __do_page_fault()
ARM: imx6: mark OCRAM mapping read-only
...
|
|
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull tracing updates from Steven Rostedt:
- kprobes: Restructured stack unwinder to show properly on x86 when a
stack dump happens from a kretprobe callback.
- Fix to bootconfig parsing
- Have tracefs allow owner and group permissions by default (only
denying others). There's been pressure to allow non root to tracefs
in a controlled fashion, and using groups is probably the safest.
- Bootconfig memory managament updates.
- Bootconfig clean up to have the tools directory be less dependent on
changes in the kernel tree.
- Allow perf to be traced by function tracer.
- Rewrite of function graph tracer to be a callback from the function
tracer instead of having its own trampoline (this change will happen
on an arch by arch basis, and currently only x86_64 implements it).
- Allow multiple direct trampolines (bpf hooks to functions) be batched
together in one synchronization.
- Allow histogram triggers to add variables that can perform
calculations against the event's fields.
- Use the linker to determine architecture callbacks from the ftrace
trampoline to allow for proper parameter prototypes and prevent
warnings from the compiler.
- Extend histogram triggers to key off of variables.
- Have trace recursion use bit magic to determine preempt context over
if branches.
- Have trace recursion disable preemption as all use cases do anyway.
- Added testing for verification of tracing utilities.
- Various small clean ups and fixes.
* tag 'trace-v5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: (101 commits)
tracing/histogram: Fix semicolon.cocci warnings
tracing/histogram: Fix documentation inline emphasis warning
tracing: Increase PERF_MAX_TRACE_SIZE to handle Sentinel1 and docker together
tracing: Show size of requested perf buffer
bootconfig: Initialize ret in xbc_parse_tree()
ftrace: do CPU checking after preemption disabled
ftrace: disable preemption when recursion locked
tracing/histogram: Document expression arithmetic and constants
tracing/histogram: Optimize division by a power of 2
tracing/histogram: Covert expr to const if both operands are constants
tracing/histogram: Simplify handling of .sym-offset in expressions
tracing: Fix operator precedence for hist triggers expression
tracing: Add division and multiplication support for hist triggers
tracing: Add support for creating hist trigger variables from literal
selftests/ftrace: Stop tracing while reading the trace file by default
MAINTAINERS: Update KPROBES and TRACING entries
test_kprobes: Move it from kernel/ to lib/
docs, kprobes: Remove invalid URL and add new reference
samples/kretprobes: Fix return value if register_kretprobe() failed
lib/bootconfig: Fix the xbc_get_info kerneldoc
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irq updates from Thomas Gleixner:
"Updates for the interrupt subsystem:
Core changes:
- Prevent a potential deadlock when initial priority is assigned to a
newly created interrupt thread. A recent change to plug a race
between cpuset and __sched_setscheduler() introduced a new lock
dependency which is now triggered. Break the lock dependency chain
by moving the priority assignment to the thread function.
- A couple of small updates to make the irq core RT safe.
- Confine the irq_cpu_online/offline() API to the only left unfixable
user Cavium Octeon so that it does not grow new usage.
- A small documentation update
Driver changes:
- A large cross architecture rework to move irq_enter/exit() into the
architecture code to make addressing the NOHZ_FULL/RCU issues
simpler.
- The obligatory new irq chip driver for Microchip EIC
- Modularize a few irq chip drivers
- Expand usage of devm_*() helpers throughout the driver code
- The usual small fixes and improvements all over the place"
* tag 'irq-core-2021-10-31' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (53 commits)
h8300: Fix linux/irqchip.h include mess
dt-bindings: irqchip: renesas-irqc: Document r8a774e1 bindings
MIPS: irq: Avoid an unused-variable error
genirq: Hide irq_cpu_{on,off}line() behind a deprecated option
irqchip/mips-gic: Get rid of the reliance on irq_cpu_online()
MIPS: loongson64: Drop call to irq_cpu_offline()
irq: remove handle_domain_{irq,nmi}()
irq: remove CONFIG_HANDLE_DOMAIN_IRQ_IRQENTRY
irq: riscv: perform irqentry in entry code
irq: openrisc: perform irqentry in entry code
irq: csky: perform irqentry in entry code
irq: arm64: perform irqentry in entry code
irq: arm: perform irqentry in entry code
irq: add a (temporary) CONFIG_HANDLE_DOMAIN_IRQ_IRQENTRY
irq: nds32: avoid CONFIG_HANDLE_DOMAIN_IRQ
irq: arc: avoid CONFIG_HANDLE_DOMAIN_IRQ
irq: add generic_handle_arch_irq()
irq: unexport handle_irq_desc()
irq: simplify handle_domain_{irq,nmi}()
irq: mips: simplify do_domain_IRQ()
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into arm/drivers
Samsung SoC drivers changes for v5.16
1. Convert Exynos ChipID and ASV driver to a module and make it a
default, instead of selected. The driver is not essential, so it
could be disabled, if needed.
2. Add support for Exynos850 and Exynos Auto v9 to Exynos ChipID and ASV
driver.
3. Get rid of HAVE_S3C_RTC because it was adding just another layer
instead of direct dependencies.
4. Minor cleanups.
* tag 'samsung-drivers-5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
soc: samsung: exynos-chipid: add exynosautov9 SoC support
rtc: s3c: remove HAVE_S3C_RTC in favor of direct dependencies
soc: samsung: exynos-chipid: Add Exynos850 support
dt-bindings: samsung: exynos-chipid: Document Exynos850 compatible
soc: samsung: exynos-chipid: Pass revision reg offsets
soc: samsung: pm_domains: drop unused is_off field
arm64: exynos: don't have ARCH_EXYNOS select EXYNOS_CHIPID
soc: samsung: exynos-chipid: do not enforce built-in
soc: samsung: exynos-chipid: convert to a module
soc: samsung: exynos-chipid: avoid soc_device_to_device()
soc: samsung: exynos-pmu: Fix compilation when nothing selects CONFIG_MFD_CORE
Link: https://lore.kernel.org/r/20211026094709.75692-2-krzysztof.kozlowski@canonical.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Now that entry code handles IRQ entry (including setting the IRQ regs)
before calling irqchip code, irqchip code can safely call
generic_handle_domain_irq(), and there's no functional reason for it to
call handle_domain_irq().
Let's cement this split of responsibility and remove handle_domain_irq()
entirely, updating irqchip drivers to call generic_handle_domain_irq().
For consistency, handle_domain_nmi() is similarly removed and replaced
with a generic_handle_domain_nmi() function which also does not perform
any entry logic.
Previously handle_domain_{irq,nmi}() had a WARN_ON() which would fire
when they were called in an inappropriate context. So that we can
identify similar issues going forward, similar WARN_ON_ONCE() logic is
added to the generic_handle_*() functions, and comments are updated for
clarity and consistency.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Reviewed-by: Marc Zyngier <maz@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
|
|
Pull ARM fixes from Russell King:
- Fix clang-related relocation warning in futex code
- Fix incorrect use of get_kernel_nofault()
- Fix bad code generation in __get_user_check() when kasan is enabled
- Ensure TLB function table is correctly aligned
- Remove duplicated string function definitions in decompressor
- Fix link-time orphan section warnings
- Fix old-style function prototype for arch_init_kprobes()
- Only warn about XIP address when not compile testing
- Handle BE32 big endian for keystone2 remapping
* tag 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm:
ARM: 9148/1: handle CONFIG_CPU_ENDIAN_BE32 in arch/arm/kernel/head.S
ARM: 9141/1: only warn about XIP address when not compile testing
ARM: 9139/1: kprobes: fix arch_init_kprobes() prototype
ARM: 9138/1: fix link warning with XIP + frame-pointer
ARM: 9134/1: remove duplicate memcpy() definition
ARM: 9133/1: mm: proc-macros: ensure *_tlb_fns are 4B aligned
ARM: 9132/1: Fix __get_user_check failure with ARM KASAN images
ARM: 9125/1: fix incorrect use of get_kernel_nofault()
ARM: 9122/1: select HAVE_FUTEX_CMPXCHG
|
|
Attempting to build mach-rpc with gcc-9 or higher, or with any version
of clang results in a build failure, like:
arm-linux-gnueabi-gcc-11.1.0: error: unrecognized -march target: armv3m
arm-linux-gnueabi-gcc-11.1.0: note: valid arguments are: armv4 armv4t armv5t armv5te armv5tej armv6 armv6j armv6k armv6z armv6kz armv6zk armv6t2 armv6-m armv6s-m armv7 armv7-a armv7ve armv7-r armv7-m armv7e-m armv8-a armv8.1-a armv8.2-a armv8.3-a armv8.4-a armv8.5-a armv8.6-a armv8-m.base armv8-m.main armv8-r armv8.1-m.main iwmmxt iwmmxt2; did you mean 'armv4'?
Building with gcc-5 also fails in at least one of these ways:
/tmp/cczZoCcv.s:68: Error: selected processor does not support `bx lr' in ARM mode
drivers/tty/vt/vt_ioctl.c:958:1: internal compiler error: Segmentation fault
Handle this in Kconfig so we don't run into this with randconfig
builds, allowing only gcc-6 through gcc-8.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
|
|
clang fails to build kernels with THUMB2 and FUNCTION_TRACER
enabled when there is any inline asm statement containing
the frame pointer register r7:
arch/arm/mach-exynos/mcpm-exynos.c:154:2: error: inline asm clobber list contains reserved registers: R7 [-Werror,-Winline-asm]
arch/arm/probes/kprobes/actions-thumb.c:449:3: error: inline asm clobber list contains reserved registers: R7 [-Werror,-Winline-asm]
Apparently gcc should also have warned about this, and the
configuration is actually invalid, though there is some
disagreement on the bug trackers about this.
Link: https://bugs.llvm.org/show_bug.cgi?id=45826
Link: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=94986
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
|
|
For platforms that are not yet converted to ARCH_MULTIPLATFORM,
we can disable CONFIG_ARM_PATCH_PHYS_VIRT, which in turn requires
setting a correct address here.
As we actualy know what all the values are supposed to be based
on the old mach/memory.h header file contents (from git history),
we can just add them here.
This also solves a problem in Kconfig where 'make randconfig'
fails to continue if no number is selected for a 'hex' option.
Users can still override the number at configuration time, e.g.
when the memory visible to the kernel starts at a nonstandard
address on some machine, but it should no longer be required
now.
I originally posted this back in 2016, but the problem still
persists. The patch has gotten much simpler though, as almost
all platforms rely on ARM_PATCH_PHYS_VIRT now.
Link: https://lore.kernel.org/linux-arm-kernel/1455804123-2526139-5-git-send-email-arnd@arndb.de/
Acked-by: Nicolas Pitre <nico@fluxnic.net>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
|
|
In preparation for removing HANDLE_DOMAIN_IRQ_IRQENTRY, have arch/arm
perform all the irqentry accounting in its entry code.
For configurations with CONFIG_GENERIC_IRQ_MULTI_HANDLER, we can use
generic_handle_arch_irq(). Other than asm_do_IRQ(), all C calls to
handle_IRQ() are from irqchip handlers which will be called from
generic_handle_arch_irq(), so to avoid double accounting IRQ entry, the
entry logic is moved from handle_IRQ() into asm_do_IRQ().
For ARMv7M the entry assembly is tightly coupled with the NVIC irqchip, and
while the entry code should logically live under arch/arm/, moving the
entry logic there makes things more convoluted. So for now, place the
entry logic in the NVIC irqchip, but separated into a separate
function to make the split of responsibility clear.
For all other configurations without CONFIG_GENERIC_IRQ_MULTI_HANDLER,
IRQ entry is already handled in arch code, and requires no changes.
There should be no functional change as a result of this patch.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Reviewed-by: Marc Zyngier <maz@kernel.org>
Tested-by: Vladimir Murzin <vladimir.murzin@arm.com> # ARMv7M
Cc: Russell King <linux@armlinux.org.uk>
Cc: Thomas Gleixner <tglx@linutronix.de>
|
|
Going forward we want architecture/entry code to perform all the
necessary work to enter/exit IRQ context, with irqchip code merely
handling the mapping of the interrupt to any handler(s). Among other
reasons, this is necessary to consistently fix some longstanding issues
with the ordering of lockdep/RCU/tracing instrumentation which many
architectures get wrong today in their entry code.
Importantly, rcu_irq_{enter,exit}() must be called precisely once per
IRQ exception, so that rcu_is_cpu_rrupt_from_idle() can correctly
identify when an interrupt was taken from an idle context which must be
explicitly preempted. Currently handle_domain_irq() calls
rcu_irq_{enter,exit}() via irq_{enter,exit}(), but entry code needs to
be able to call rcu_irq_{enter,exit}() earlier for correct ordering
across lockdep/RCU/tracing updates for sequences such as:
lockdep_hardirqs_off(CALLER_ADDR0);
rcu_irq_enter();
trace_hardirqs_off_finish();
To permit each architecture to be converted to the new style in turn,
this patch adds a new CONFIG_HANDLE_DOMAIN_IRQ_IRQENTRY selected by all
current users of HANDLE_DOMAIN_IRQ, which gates the existing behaviour.
When CONFIG_HANDLE_DOMAIN_IRQ_IRQENTRY is not selected,
handle_domain_irq() requires entry code to perform the
irq_{enter,exit}() work, with an explicit check for this matching the
style of handle_domain_nmi().
Subsequent patches will:
1) Add the necessary IRQ entry accounting to each architecture in turn,
dropping CONFIG_HANDLE_DOMAIN_IRQ_IRQENTRY from that architecture's
Kconfig.
2) Remove CONFIG_HANDLE_DOMAIN_IRQ_IRQENTRY once it is no longer
selected.
3) Convert irqchip drivers to consistently use
generic_handle_domain_irq() rather than handle_domain_irq().
4) Remove handle_domain_irq() and CONFIG_HANDLE_DOMAIN_IRQ.
... which should leave us with a clear split of responsiblity across the
entry and irqchip code, making it possible to perform additional
cleanups and fixes for the aforementioned longstanding issues with entry
code.
There should be no functional change as a result of this patch.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Reviewed-by: Marc Zyngier <maz@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
|
|
Since the kretprobe replaces the function return address with
the kretprobe_trampoline on the stack, arm unwinder shows it
instead of the correct return address.
This finds the correct return address from the per-task
kretprobe_instances list and verify it is in between the
caller fp and callee fp.
Note that this supports both GCC and clang if CONFIG_FRAME_POINTER=y
and CONFIG_ARM_UNWIND=n. For the ARM unwinder, this is still
not working correctly.
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
|
|
Converted in-place without moving file to drivers/clk.
tested on ts7250 (EP9302).
Only setting rate and change parent tested for, as they
are missing on ts7250:
- video
- I2S
- ADC/KEYPAD
- PWM
Only video and I2S clock are interesting, as they are
GATE + double DIV + MUX, all other are pretty much
common but require ep93xx_syscon_swlocked_write to set
registers.
Signed-off-by: Nikita Shubin <nikita.shubin@maquefel.me>
Signed-off-by: Alexander Sverdlin <alexander.sverdlin@gmail.com>
Tested-by: Alexander Sverdlin <alexander.sverdlin@gmail.com>
Acked-by: Alexander Sverdlin <alexander.sverdlin@gmail.com>
Link: https://lore.kernel.org/r/20211018103105.146380-3-alexander.sverdlin@gmail.com'
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
tglx notes:
This function [futex_detect_cmpxchg] is only needed when an
architecture has to runtime discover whether the CPU supports it or
not. ARM has unconditional support for this, so the obvious thing to
do is the below.
Fixes linkage failure from Clang randconfigs:
kernel/futex.o:(.text.fixup+0x5c): relocation truncated to fit: R_ARM_JUMP24 against `.init.text'
and boot failures for CONFIG_THUMB2_KERNEL.
Link: https://github.com/ClangBuiltLinux/linux/issues/325
Comments from Nick Desaulniers:
See-also: 03b8c7b623c8 ("futex: Allow architectures to skip
futex_atomic_cmpxchg_inatomic() test")
Reported-by: Arnd Bergmann <arnd@arndb.de>
Reported-by: Nathan Chancellor <nathan@kernel.org>
Suggested-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Nick Desaulniers <ndesaulniers@google.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Cc: stable@vger.kernel.org # v3.14+
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
|
|
The config HAVE_S3C_RTC is not really needed since we can simply just
add the dependencies directly to RTC_DRV_S3C. Also, one less config to
keep track of!
Signed-off-by: Will McVicker <willmcvicker@google.com>
Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/20211013212256.3425889-1-willmcvicker@google.com
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
|
|
Compile-testing drivers that require access to a firmware layer
fails when that firmware symbol is unavailable. This happened
twice this week:
- My proposed to change to rework the QCOM_SCM firmware symbol
broke on ppc64 and others.
- The cs_dsp firmware patch added device specific firmware loader
into drivers/firmware, which broke on the same set of
architectures.
We should probably do the same thing for other subsystems as well,
but fix this one first as this is a dependency for other patches
getting merged.
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Acked-by: Will Deacon <will@kernel.org>
Acked-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Cc: Mark Brown <broonie@kernel.org>
Cc: Liam Girdwood <lgirdwood@gmail.com>
Cc: Charles Keepax <ckeepax@opensource.cirrus.com>
Cc: Simon Trimmer <simont@opensource.cirrus.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Reviewed-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Now that we no longer rely on thread_info living at the base of the task
stack to be able to access the 'current' pointer, we can wire up the
generic support for moving thread_info into the task struct itself.
Note that this requires us to update the cpu field in thread_info
explicitly, now that the core code no longer does so. Ideally, we would
switch the percpu code to access the cpu field in task_struct instead,
but this unleashes #include circular dependency hell.
Co-developed-by: Keith Packard <keithpac@amazon.com>
Signed-off-by: Keith Packard <keithpac@amazon.com>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Tested-by: Amit Daniel Kachhap <amit.kachhap@arm.com>
|
|
Now that the user space TLS register is assigned on every return to user
space, we can use it to keep the 'current' pointer while running in the
kernel. This removes the need to access it via thread_info, which is
located at the base of the stack, but will be moved out of there in a
subsequent patch.
Use the __builtin_thread_pointer() helper when available - this will
help GCC understand that reloading the value within the same function is
not necessary, even when using the per-task stack protector (which also
generates accesses via the TLS register). For example, the generated
code below loads TPIDRURO only once, and uses it to access both the
stack canary and the preempt_count fields.
<do_one_initcall>:
e92d 41f0 stmdb sp!, {r4, r5, r6, r7, r8, lr}
ee1d 4f70 mrc 15, 0, r4, cr13, cr0, {3}
4606 mov r6, r0
b094 sub sp, #80 ; 0x50
f8d4 34e8 ldr.w r3, [r4, #1256] ; 0x4e8 <- stack canary
9313 str r3, [sp, #76] ; 0x4c
f8d4 8004 ldr.w r8, [r4, #4] <- preempt count
Co-developed-by: Keith Packard <keithpac@amazon.com>
Signed-off-by: Keith Packard <keithpac@amazon.com>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Tested-by: Amit Daniel Kachhap <amit.kachhap@arm.com>
|
|
We will be enabling THREAD_INFO_IN_TASK support for ARM, which means
that we can no longer load the stack canary value by masking the stack
pointer and taking the copy that lives in thread_info. Instead, we will
be able to load it from the task_struct directly, by using the TPIDRURO
register which will hold the current task pointer when
THREAD_INFO_IN_TASK is in effect. This is much more straight-forward,
and allows us to declutter this code a bit while at it.
Note that this means that ARMv6 (non-v6K) SMP systems can no longer use
this feature, but those are quite rare to begin with, so this is a
reasonable trade off.
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Tested-by: Amit Daniel Kachhap <amit.kachhap@arm.com>
|
|
Pull ARM development updates from Russell King:
- Rename "mod_init" and "mod_exit" so that initcall debug output is
actually useful (Randy Dunlap)
- Update maintainers entries for linux-arm-kernel to indicate it is
moderated for non-subscribers (Randy Dunlap)
- Move install rules to arch/arm/Makefile (Masahiro Yamada)
- Drop unnecessary ARCH_NR_GPIOS definition (Linus Walleij)
- Don't warn about atags_to_fdt() stack size (David Heidelberg)
- Speed up unaligned copy_{from,to}_kernel_nofault (Arnd Bergmann)
- Get rid of set_fs() usage (Arnd Bergmann)
- Remove checks for GCC prior to v4.6 (Geert Uytterhoeven)
* tag 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm:
ARM: 9118/1: div64: Remove always-true __div64_const32_is_OK() duplicate
ARM: 9117/1: asm-generic: div64: Remove always-true __div64_const32_is_OK()
ARM: 9116/1: unified: Remove check for gcc < 4
ARM: 9110/1: oabi-compat: fix oabi epoll sparse warning
ARM: 9113/1: uaccess: remove set_fs() implementation
ARM: 9112/1: uaccess: add __{get,put}_kernel_nofault
ARM: 9111/1: oabi-compat: rework fcntl64() emulation
ARM: 9114/1: oabi-compat: rework sys_semtimedop emulation
ARM: 9108/1: oabi-compat: rework epoll_wait/epoll_pwait emulation
ARM: 9107/1: syscall: always store thread_info->abi_syscall
ARM: 9109/1: oabi-compat: add epoll_pwait handler
ARM: 9106/1: traps: use get_kernel_nofault instead of set_fs()
ARM: 9115/1: mm/maccess: fix unaligned copy_{from,to}_kernel_nofault
ARM: 9105/1: atags_to_fdt: don't warn about stack size
ARM: 9103/1: Drop ARCH_NR_GPIOS definition
ARM: 9102/1: move theinstall rules to arch/arm/Makefile
ARM: 9100/1: MAINTAINERS: mark all linux-arm-kernel@infradead list as moderated
ARM: 9099/1: crypto: rename 'mod_init' & 'mod_exit' functions to be module-specific
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull tracing updates from Steven Rostedt:
- simplify the Kconfig use of FTRACE and TRACE_IRQFLAGS_SUPPORT
- bootconfig can now start histograms
- bootconfig supports group/all enabling
- histograms now can put values in linear size buckets
- execnames can be passed to synthetic events
- introduce "event probes" that attach to other events and can retrieve
data from pointers of fields, or record fields as different types (a
pointer to a string as a string instead of just a hex number)
- various fixes and clean ups
* tag 'trace-v5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: (35 commits)
tracing/doc: Fix table format in histogram code
selftests/ftrace: Add selftest for testing duplicate eprobes and kprobes
selftests/ftrace: Add selftest for testing eprobe events on synthetic events
selftests/ftrace: Add test case to test adding and removing of event probe
selftests/ftrace: Fix requirement check of README file
selftests/ftrace: Add clear_dynamic_events() to test cases
tracing: Add a probe that attaches to trace events
tracing/probes: Reject events which have the same name of existing one
tracing/probes: Have process_fetch_insn() take a void * instead of pt_regs
tracing/probe: Change traceprobe_set_print_fmt() to take a type
tracing/probes: Use struct_size() instead of defining custom macros
tracing/probes: Allow for dot delimiter as well as slash for system names
tracing/probe: Have traceprobe_parse_probe_arg() take a const arg
tracing: Have dynamic events have a ref counter
tracing: Add DYNAMIC flag for dynamic events
tracing: Replace deprecated CPU-hotplug functions.
MAINTAINERS: Add an entry for os noise/latency
tracepoint: Fix kerneldoc comments
bootconfig/tracing/ktest: Update ktest example for boot-time tracing
tools/bootconfig: Use per-group/all enable option in ftrace2bconf script
...
|
|
Pull dma-mapping updates from Christoph Hellwig:
- fix debugfs initialization order (Anthony Iliopoulos)
- use memory_intersects() directly (Kefeng Wang)
- allow to return specific errors from ->map_sg (Logan Gunthorpe,
Martin Oliveira)
- turn the dma_map_sg return value into an unsigned int (me)
- provide a common global coherent pool іmplementation (me)
* tag 'dma-mapping-5.15' of git://git.infradead.org/users/hch/dma-mapping: (31 commits)
hexagon: use the generic global coherent pool
dma-mapping: make the global coherent pool conditional
dma-mapping: add a dma_init_global_coherent helper
dma-mapping: simplify dma_init_coherent_memory
dma-mapping: allow using the global coherent pool for !ARM
ARM/nommu: use the generic dma-direct code for non-coherent devices
dma-direct: add support for dma_coherent_default_memory
dma-mapping: return an unsigned int from dma_map_sg{,_attrs}
dma-mapping: disallow .map_sg operations from returning zero on error
dma-mapping: return error code from dma_dummy_map_sg()
x86/amd_gart: don't set failed sg dma_address to DMA_MAPPING_ERROR
x86/amd_gart: return error code from gart_map_sg()
xen: swiotlb: return error code from xen_swiotlb_map_sg()
parisc: return error code from .map_sg() ops
sparc/iommu: don't set failed sg dma_address to DMA_MAPPING_ERROR
sparc/iommu: return error codes from .map_sg() ops
s390/pci: don't set failed sg dma_address to DMA_MAPPING_ERROR
s390/pci: return error code from s390_dma_map_sg()
powerpc/iommu: don't set failed sg dma_address to DMA_MAPPING_ERROR
powerpc/iommu: return error code from .map_sg() ops
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic
Pull asm-generic updates from Arnd Bergmann:
"The main content for 5.15 is a series that cleans up the handling of
strncpy_from_user() and strnlen_user(), removing a lot of slightly
incorrect versions of these in favor of the lib/strn*.c helpers that
implement these correctly and more efficiently.
The only architectures that retain a private version now are mips,
ia64, um and parisc. I had offered to convert those at all, but Thomas
Bogendoerfer wanted to keep the mips version for the moment until he
had a chance to do regression testing.
The branch also contains two patches for bitops and for ffs()"
* tag 'asm-generic-5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic:
bitops/non-atomic: make @nr unsigned to avoid any DIV
asm-generic: ffs: Drop bogus reference to ffz location
asm-generic: reverse GENERIC_{STRNCPY_FROM,STRNLEN}_USER symbols
asm-generic: remove extra strn{cpy_from,len}_user declarations
asm-generic: uaccess: remove inline strncpy_from_user/strnlen_user
s390: use generic strncpy/strnlen from_user
microblaze: use generic strncpy/strnlen from_user
csky: use generic strncpy/strnlen from_user
arc: use generic strncpy/strnlen from_user
hexagon: use generic strncpy/strnlen from_user
h8300: remove stale strncpy_from_user
asm-generic/uaccess.h: remove __strncpy_from_user/__strnlen_user
|
|
There are no remaining callers of set_fs(), so just remove it
along with all associated code that operates on
thread_info->addr_limit.
There are still further optimizations that can be done:
- In get_user(), the address check could be moved entirely
into the out of line code, rather than passing a constant
as an argument,
- I assume the DACR handling can be simplified as we now
only change it during user access when CONFIG_CPU_SW_DOMAIN_PAN
is set, but not during set_fs().
Acked-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
|
|
Select the right options to just use the generic dma-direct code
instead of reimplementing it.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Tested-by: Dillon Min <dillon.minfei@gmail.com>
|
|
Make architectures select TRACE_IRQFLAGS_SUPPORT instead of
having many defines.
Link: https://lkml.kernel.org/r/20210731052233.4703-2-masahiroy@kernel.org
Acked-by: Heiko Carstens <hca@linux.ibm.com>
Acked-by: Vineet Gupta <vgupta@synopsys.com> #arch/arc
Acked-by: Michael Ellerman <mpe@ellerman.id.au> (powerpc)
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Acked-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
|
|
Pull libata fixlets from Jens Axboe:
- A fix for PIO highmem (Christoph)
- Kill HAVE_IDE as it's now unused (Lukas)
* tag 'libata-5.14-2021-07-30' of git://git.kernel.dk/linux-block:
arch: Kconfig: clean up obsolete use of HAVE_IDE
libata: fix ata_pio_sector for CONFIG_HIGHMEM
|
|
The arch-specific Kconfig files use HAVE_IDE to indicate if IDE is
supported.
As IDE support and the HAVE_IDE config vanishes with commit b7fb14d3ac63
("ide: remove the legacy ide driver"), there is no need to mention
HAVE_IDE in all those arch-specific Kconfig files.
The issue was identified with ./scripts/checkkconfigsymbols.py.
Fixes: b7fb14d3ac63 ("ide: remove the legacy ide driver")
Suggested-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Link: https://lore.kernel.org/r/20210728182115.4401-1-lukas.bulwahn@gmail.com
Reviewed-by: Christoph Hellwig <hch@lst.de>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Most architectures do not need a custom implementation, and in most
cases the generic implementation is preferred, so change the polariy
on these Kconfig symbols to require architectures to select them when
they provide their own version.
The new name is CONFIG_ARCH_HAS_{STRNCPY_FROM,STRNLEN}_USER.
The remaining architectures at the moment are: ia64, mips, parisc,
um and xtensa. We should probably convert these as well, but
I was not sure how far to take this series. Thomas Bogendoerfer
had some concerns about converting mips but may still do some
more detailed measurements to see which version is better.
Cc: "James E.J. Bottomley" <James.Bottomley@HansenPartnership.com>
Cc: Anton Ivanov <anton.ivanov@cambridgegreys.com>
Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Helge Deller <deller@gmx.de>
Cc: Jeff Dike <jdike@addtoit.com>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Cc: Richard Weinberger <richard@nod.at>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: linux-ia64@vger.kernel.org
Cc: linux-mips@vger.kernel.org
Cc: linux-parisc@vger.kernel.org
Cc: linux-s390@vger.kernel.org
Cc: linux-um@lists.infradead.org
Cc: linux-xtensa@linux-xtensa.org
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: Helge Deller <deller@gmx.de> # parisc
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Kconfig symbol PCI_IXP4XX_LEGACY does not exist, but IXP4XX_PCI_LEGACY
does.
Fixes: d5d9f7ac58ea1041 ("ARM/ixp4xx: Make NEED_MACH_IO_H optional")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/82ce37c617293521f095a945a255456b9512769c.1626255077.git.geert+renesas@glider.be'
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC updates from Olof Johansson:
"A few SoC (code) changes have queued up this cycle, mostly for minor
changes and some refactoring and cleanup of legacy platforms. This
branch also contains a few of the fixes that weren't sent in by the
end of the release (all fairly minor).
- Adding an additional maintainer for the TEE subsystem (Sumit Garg)
- Quite a significant modernization of the IXP4xx platforms by Linus
Walleij, revisiting with a new PCI host driver/binding, removing
legacy mach/* include dependencies and moving platform
detection/config to drivers/soc. Also some updates/cleanup of
platform data.
- Core power domain support for Tegra platforms, and some
improvements in build test coverage by adding stubs for compile
test targets.
- A handful of updates to i.MX platforms, adding legacy (non-PSCI)
SMP support on i.MX7D, SoC ID setup for i.MX50, removal of platform
data and board fixups for iMX6/7.
... and a few smaller changes and fixes for Samsung, OMAP, Allwinner,
Rockchip"
* tag 'arm-soc-5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (53 commits)
MAINTAINERS: Add myself as TEE subsystem reviewer
ixp4xx: fix spelling mistake in Kconfig "Devce" -> "Device"
hw_random: ixp4xx: Add OF support
hw_random: ixp4xx: Add DT bindings
hw_random: ixp4xx: Turn into a module
hw_random: ixp4xx: Use SPDX license tag
hw_random: ixp4xx: enable compile-testing
pata: ixp4xx: split platform data to its own header
soc: ixp4xx: move cpu detection to linux/soc/ixp4xx/cpu.h
PCI: ixp4xx: Add a new driver for IXP4xx
PCI: ixp4xx: Add device tree bindings for IXP4xx
ARM/ixp4xx: Make NEED_MACH_IO_H optional
ARM/ixp4xx: Move the virtual IObases
MAINTAINERS: ARM/MStar/Sigmastar SoCs: Add a link to the MStar tree
ARM: debug: add UART early console support for MSTAR SoCs
ARM: dts: ux500: Fix LED probing
ARM: imx: add smp support for imx7d
ARM: imx6q: drop of_platform_default_populate() from init_machine
arm64: dts: rockchip: Update RK3399 PCI host bridge window to 32-bit address memory
soc/tegra: fuse: Fix Tegra234-only builds
...
|
|
Merge more updates from Andrew Morton:
"190 patches.
Subsystems affected by this patch series: mm (hugetlb, userfaultfd,
vmscan, kconfig, proc, z3fold, zbud, ras, mempolicy, memblock,
migration, thp, nommu, kconfig, madvise, memory-hotplug, zswap,
zsmalloc, zram, cleanups, kfence, and hmm), procfs, sysctl, misc,
core-kernel, lib, lz4, checkpatch, init, kprobes, nilfs2, hfs,
signals, exec, kcov, selftests, compress/decompress, and ipc"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (190 commits)
ipc/util.c: use binary search for max_idx
ipc/sem.c: use READ_ONCE()/WRITE_ONCE() for use_global_lock
ipc: use kmalloc for msg_queue and shmid_kernel
ipc sem: use kvmalloc for sem_undo allocation
lib/decompressors: remove set but not used variabled 'level'
selftests/vm/pkeys: exercise x86 XSAVE init state
selftests/vm/pkeys: refill shadow register after implicit kernel write
selftests/vm/pkeys: handle negative sys_pkey_alloc() return code
selftests/vm/pkeys: fix alloc_random_pkey() to make it really, really random
kcov: add __no_sanitize_coverage to fix noinstr for all architectures
exec: remove checks in __register_bimfmt()
x86: signal: don't do sas_ss_reset() until we are certain that sigframe won't be abandoned
hfsplus: report create_date to kstat.btime
hfsplus: remove unnecessary oom message
nilfs2: remove redundant continue statement in a while-loop
kprobes: remove duplicated strong free_insn_page in x86 and s390
init: print out unknown kernel parameters
checkpatch: do not complain about positive return values starting with EPOLL
checkpatch: improve the indented label test
checkpatch: scripts/spdxcheck.py now requires python3
...
|
