summaryrefslogtreecommitdiff
path: root/arch/arm/boot/dts/armada-370-netgear-rn102.dts
AgeCommit message (Collapse)AuthorFilesLines
2018-05-18ARM: dts: armada-370-xp: update NAND node with new bindingsMiquel Raynal1-40/+50
Use the new bindings of the Marvell NAND controller driver. Also adapt the NAND controller node organization to distinguish which property is relevant for the controller, and which one is NAND chip specific. Expose the partitions as a subnode of the NAND chip. Remove the 'marvell,nand-enable-arbiter' property, not needed anymore as the new driver activates the arbiter by default for all boards which is either needed or harmless. Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
2018-03-27arm: dts: armada-*.dts: use SPDX-License-Identifier for most of the Armada ↵Gregory CLEMENT1-38/+1
based board Follow the recent trend for the license description, and also fix the wrongly stated X11 to MIT. As already pointed on the DT ML, the X11 license text [1] is explicitly for the X Consortium and has a couple of extra clauses. The MIT license text [2] is actually what the current DT files claim. [1] https://spdx.org/licenses/X11.html [2] https://spdx.org/licenses/MIT.html Acked-by: Jason Cooper <jason@lakedaemon.net> Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
2018-02-13ARM: dts: armada: netgear-rn*: fix rtc node nameAlexandre Belloni1-1/+1
The node name should be generic and must not contain the part number. Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
2017-01-03ARM: dts: mvebu: Correct license textAlexandre Belloni1-5/+5
The license text has been mangled at some point then copy pasted across multiple files. Restore it to what it should be. Note that this is not intended as a license change. Acked-by: Florian Fainelli <f.fainelli@gmail.com> Acked-by: Stefan Roese <sr@denx.de> Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Acked-by: Rafał Miłecki <zajec5@gmail.com> Acked-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
2016-11-19ARM: dts: armada-370-xp: Fixup memory DT warningGregory CLEMENT1-1/+1
memory has a reg property so the unit name should contain an address. Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
2016-11-19ARM: dts: armada-370: Fixup pcie DT warningsGregory CLEMENT1-16/+16
PCIe has a ranges property, so the unit name should contain an address. Take the opportunity to use the node label instead of the full name. Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
2016-11-19ARM: dts: armada-370-xp: Fixup mdio DT warningGregory CLEMENT1-8/+8
MDIO has a reg property so the unit name should contain an address. Take the opportunity to use the node label instead of the full name. Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
2016-11-04ARM: dts: armada-370-rn102: add pinmuxing for i2c0Uwe Kleine-König1-0/+4
Up to now a working i2c bus depended on the bootloader to configure the pinmuxing. Make it explicit. As a side effect this change makes i2c work in barebox. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
2016-11-04ARM: dts: armada-370-rn102: drop specification of compatible for i2c0Uwe Kleine-König1-1/+0
The compatible string is already provided by armada-370.dtsi. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
2015-12-15ARM: dts: armada: replace isil, irq2-can-wakeup-machine with wakeup-source ↵Sudeep Holla1-1/+1
property Though the driver will continue to check for and support the legacy "isil,irq2-can-wakeup-machine" boolean property to wakeup source, "wakeup-source" is the new standard binding. This patch replaces the legacy "isil,irq2-can-wakeup-machine" with the unified "wakeup-source" property in order to avoid any futher copy-paste duplication. Cc: Jason Cooper <jason@lakedaemon.net> Cc: Andrew Lunn <andrew@lunn.ch> Cc: Gregory Clement <gregory.clement@free-electrons.com> Cc: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Signed-off-by: Sudeep Holla <sudeep.holla@arm.com> Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
2015-10-12arm: mvebu: disable unused Armada RTC on ReadyNAS 102, 104 and 2120Arnaud Ebalard1-0/+6
By default, armada-370-xp.dtsi file has internal RTC enabled. NETGEAR ReadyNAS 102, 104 and 2120 all use an Intersil ISL12057 I2C RTC chip. The internal RTC not being disabled in the .dts files of those devices result in the following useless first line during boot: [ 4.500056] rtc-mv d0010300.rtc: internal RTC not ticking [ 4.505684] i2c /dev entries driver [ 4.513246] rtc-isl12057 0-0068: rtc core: registered rtc-isl12057 as rtc0 This patch marks Armada internal RTC as disabled in individual .dts files of those devices. Reported-by: TuxOholic <tuxoholic@hotmail.de> Signed-off-by: Arnaud Ebalard <arno@natisbad.org> Acked-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
2015-09-29ARM: mvebu: define crypto SRAM ranges for all armada-370 boardsBoris Brezillon1-1/+2
Define the crypto SRAM ranges so that the resources referenced by the sa-sram node can be properly extracted from the DT. Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com> Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
2015-03-04ARM: mvebu: use stdout-path in all armada-*.dtsThomas Petazzoni1-1/+1
This commit adds the stdout-path property in /chosen for all Armada boards that were not yet carrying this property, and gets rid of /chosen/bootargs which becomes unneeded: earlyprintk should not be used by default, and the console= parameter is replaced by the /chosen/stdout-path property. Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
2015-02-17Merge tag 'dt-for-linus' of ↵Linus Torvalds1-4/+37
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC DT updates from Olof Johansson: "DT changes continue to be the bulk of our merge window contents. We continue to have a large set of changes across the board as new platforms and drivers are added. Some of the new platforms are: - Alphascale ASM9260 - Marvell Armada 388 - CSR Atlas7 - TI Davinci DM816x - Hisilicon HiP01 - ST STiH418 There have also been some sweeping changes, including relicensing of DTS contents from GPL to GPLv2+/X11 so that the same files can be reused in other non-GPL projects more easily. There's also been changes to the DT Makefile to make it a little less conflict-ridden and churny down the road" * tag 'dt-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (330 commits) ARM: dts: Add PPMU node for exynos4412-trats2 ARM: dts: Add PPMU node for exynos3250-monk and exynos3250-rinato ARM: dts: Add PPMU dt node for exynos4 and exynos4210 ARM: dts: Add PPMU dt node for exynos3250 ARM: dts: add mipi dsi device node for exynos4415 ARM: dts: add fimd device node for exynos4415 ARM: dts: Add syscon phandle to the video-phy node for Exynos4 ARM: dts: Add sound nodes for exynos4412-trats2 ARM: dts: Fix CLK_MOUT_CAMn parent clocks assignment for exynos4412-trats2 ARM: dts: Fix CLK_UART_ISP_SCLK clock assignment in exynos4x12.dtsi ARM: dts: Add max77693 charger node for exynos4412-trats2 ARM: dts: Switch max77686 regulators to GPIO control for exynos4412-trats2 ARM: dts: Add suspend configuration for max77686 regulators for exynos4412-trats2 ARM: dts: Add Maxim 77693 fuel gauge node for exynos4412-trats2 ARM: dts: am57xx-beagle-x15: Fix USB2 mode ARM: dts: am57xx-beagle-x15: Add extcon nodes for USB ARM: dts: dra72-evm: Add extcon nodes for USB ARM: dts: dra7-evm: Add extcon nodes for USB ARM: dts: rockchip: move the hdmi ddc-i2c-bus property to the actual boards ARM: dts: rockchip: enable vops and hdmi output on rk3288-firefly and -evb ...
2015-02-14ARM: mvebu: ISL12057 rtc chip can now wake up RN102, RN102 and RN2120Arnaud Ebalard1-0/+1
Now that alarm support for ISL12057 chip is available w/ the specific "isil,irq2-can-wakeup-machine" property, let's use that feature of the driver dedicated to NETGEAR ReadyNAS 102, 104 and 2120 specific routing of RTC Alarm IRQ#2 pin; on those devices, this pin is not connected to the SoC but to a PMIC, which allows the device to be powered up when RTC alarm rings. For that to work, the chip needs to be explicitly marked as a device wakeup source using this "isil,irq2-can-wakeup-machine" boolean property. This makes 'wakealarm' sysfs entry available to configure the alarm. Signed-off-by: Arnaud Ebalard <arno@natisbad.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Peter Huewe <peter.huewe@infineon.com> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Thierry Reding <treding@nvidia.com> Cc: Mark Brown <broonie@kernel.org> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Darshana Padmadas <darshanapadmadas@gmail.com> Cc: Rob Herring <rob.herring@calxeda.com> Cc: Pawel Moll <pawel.moll@arm.com> Cc: Stephen Warren <swarren@wwwdotorg.org> Cc: Ian Campbell <ijc+devicetree@hellion.org.uk> Cc: Grant Likely <grant.likely@linaro.org> Cc: Rob Landley <rob@landley.net> Cc: Jason Cooper <jason@lakedaemon.net> Cc: Guenter Roeck <linux@roeck-us.net> Cc: Jason Gunthorpe <jgunthorpe@obsidianresearch.com> Cc: Kumar Gala <galak@codeaurora.org> Cc: Uwe Kleine-König <uwe@kleine-koenig.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-01-27ARM: mvebu: armada-370-netgear-rn102: Relicense the device tree under GPLv2+/X11Gregory CLEMENT1-4/+37
The current GPL only licensing on the device tree makes it very impractical for other software components licensed under another license. In order to make it easier for them to reuse our device trees, relicense our device trees under a GPL/X11 dual-license. Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Acked-by: Arnaud Ebalard <arno@natisbad.org> Acked-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com> Acked-by: Jason Cooper <jason@lakedaemon.net> Acked-by: Ben Peddell <klightspeed@killerwolves.net> Acked-by: Philipp Zabel <p.zabel@pengutronix.de> Acked-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2014-11-22arm: mvebu: move Armada 370/XP pinctrl node definition armada-370-xp.dtsiArnaud Ebalard1-42/+42
What was done by Sebastian in 264a05e19bf5 ("ARM: mvebu: armada-xp: Add node alias to pinctrl and add base address") and 01c434225ee6 ("ARM: mvebu: armada-xp: Use pinctrl node alias") can also be done for Armada 370, i.e. - Rename Armada 370 pinctrl node to pin-ctrl with its address encoded - Add a node alias to access the pinctrl node easily. - use the newly available alias in existing Armada 370 .dts files We can even go a bit further by putting the pinctrl node definition in armada-370-xp.dtsi, with only its reg property defined. This allows us to then also use the newly defined node alias in armada-xp.dtsi, armada-370.dtsi. Suggested-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Suggested-by: Andrew Lunn <andrew@lunn.ch> Acked-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Arnaud Ebalard <arno@natisbad.org> Link: https://lkml.kernel.org/r/b54eb45e5242728aace3ce8aef2eae4251f8dea3.1416613429.git.arno@natisbad.org Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2014-11-02arm: mvebu: Clarify (e)SATA ports info in NETGEAR ReadyNAS 102 .dts fileArnaud Ebalard1-2/+3
On NETGEAR ReadyNAS 102, the two disks are connected to the external Marvell 88SE9170 SATA Controller connected to the PCIe bus. The rear eSATA port is connected to the native Armada 370 SATA controller. This patch updates the comments in .dts file wrt SATA interfaces and reduces the number of ports for native Armada 370 interface from 2 to 1. Signed-off-by: Arnaud Ebalard <arno@natisbad.org> Acked-by: Andrew Lunn <andrew@lunn.ch> Acked-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Link: https://lkml.kernel.org/r/4af680f9a68281755e31df2491f0590046138230.1414185031.git.arno@natisbad.org Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2014-11-02arm: mvebu: Fix LED color in NETGEAR ReadyNAS 102 .dts fileArnaud Ebalard1-6/+6
When writing initial .dts file for NETGEAR ReadyNAS 102, I put the wrong color for backup and SATA leds (green instead of blue for all three). Reported-by: Johan Kristell <johan.kristell@gmail.com> Signed-off-by: Arnaud Ebalard <arno@natisbad.org> Acked-by: Andrew Lunn <andrew@lunn.ch> Acked-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Link: https://lkml.kernel.org/r/4eb4049d934a3a8fe9f7235dafb6842422792566.1414185031.git.arno@natisbad.org Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2014-10-09Merge tag 'dt-for-linus' of ↵Linus Torvalds1-1/+5
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC DT updates from Arnd Bergmann: "As usual, this is the largest branch, though this time a little under half of the total changes with 307 individual non-merge changesets. The largest changes are the addition of new machines, in particular the Tegra based Chromebook, the Renesas r8a7794 SoC, and DT support for the old i.MX1 platform. Other changes include - at91: various sam9 and sama5 updates - exynos: much extended Peach Pi/Pit (Chromebook 2) support - keystone: new peripherals - meson: added DT for meson6 SoC - mvebu: new device support for Armada 370/375 - qcom: improved support for IPQ8064 and MSM8x60 - rockchip: much improved support for rk3288 - shmobile: lots of updates all over the place - sunxi: dts license change - sunxi: more a23 device support - vexpress: CLCD DT description" * tag 'dt-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (308 commits) ARM: DTS: meson: update DTSI to add watchdog node ARM: dts: keystone-k2l: fix mdio io start address ARM: dts: keystone-k2e: fix mdio io start address ARM: dts: keystone-k2e: update usb1 node for dma properties ARM: dts: keystone: fix io range for usb_phy0 Revert "Merge tag 'hix5hd2-dt-for-3.18' of git://github.com/hisilicon/linux-hisi into next/dt" Revert "ARM: dts: hix5hd2: add wdg node" ARM: dts: add rk3288 i2s controller ARM: vexpress: Add CLCD Device Tree properties ARM: bcm2835: add I2S pinctrl to device tree ARM: meson: documentation: add bindings documentation ARM: meson: dts: add basic Meson/Meson6/Meson6-atv1200 DTSI/DTS ARM: dts: mt6589: Change compatible string for GIC ARM: dts: mediatek: Add compatible property for aquaris5 ARM: dts: mt6589-aquaris5: Add boot argument earlyprintk ARM: dts: mt6589: Fix typo in GIC unit address ARM: dts: Build dtb for Mediatek board ARM: dts: keystone: fix bindings for pcie and usb clock nodes ARM: dts: keystone: k2l: Fix chip selects for SPI devices ARM: dts: keystone: add dsp gpio controllers nodes ...
2014-09-14ARM: mvebu: Netgear RN102: Use Hardware BCH ECCklightspeed@killerwolves.net1-0/+4
The bootloader on the Netgear ReadyNAS RN102 uses Hardware BCH ECC (strength = 4), while the pxa3xx NAND driver by default uses Hamming ECC (strength = 1). This patch changes the ECC mode on these machines to match that of the bootloader and of the stock firmware. That way, it is now possible to update the kernel from userland (e.g. using standard tools from mtd-utils package); u-boot will happily load and boot it. Fixes: 92beaccd8b49 ("ARM: mvebu: Enable NAND controller in ReadyNAS 102 .dts file") Cc: <stable@vger.kernel.org> #v3.14+ Signed-off-by: Ben Peddell <klightspeed@killerwolves.net> Acked-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com> Tested-by: Arnaud Ebalard <arno@natisbad.org> Link: https://lkml.kernel.org/r/1410339341-3372-1-git-send-email-klightspeed@killerwolves.net Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2014-09-09ARM: mvebu: Change vendor prefix for Intersil Corporation to isilPhilipp Zabel1-1/+1
Currently there is a wild mixture of isl, isil, and intersil compatibles in the kernel. At this point, changing the vendor symbol to the most often used variant, which is equal to the NASDAQ symbol, isil, should not hurt. Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Link: https://lkml.kernel.org/r/1410167960-554-4-git-send-email-p.zabel@pengutronix.de Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2014-08-17ARM: mvebu: Add proper pin muxing on Netgear ReadyNAS 102Ezequiel Garcia1-0/+4
This commit adds the required pin muxing for the network interfaces and the MDIO interface to be properly initialized. For instance, this makes it possible for a bootloader to initialize and access the network interfaces Signed-off-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com> Acked-by: Andrew Lunn <andrew@lunn.ch> Link: https://lkml.kernel.org/r/1407759281-11513-5-git-send-email-ezequiel.garcia@free-electrons.com Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2014-04-26ARM: mvebu: remove clock-frequency of serial port Device Tree nodesThomas Petazzoni1-1/+0
Now that the Armada 370/375/38x/XP SoC-level Device Tree files have the proper "clocks" property in their UART controllers node, it is no longer useful to have the clock-frequency property defined in the board-level Device Tree files. Therefore, this commit gets rid of all the useless 'clock-frequency' properties. Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Acked-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Link: https://lkml.kernel.org/r/1397806908-7550-5-git-send-email-thomas.petazzoni@free-electrons.com Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2013-12-20ARM: mvebu: Enable ISL12057 RTC chip in ReadyNAS 102 .dts fileArnaud Ebalard1-0/+5
Now that support for Intersil ISL12057 RTC chip is available upstream, let's enable it in NETGEAR ReadyNAS 102 .dts file so that the device stop believing it's the 70's. Signed-off-by: Arnaud Ebalard <arno@natisbad.org> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2013-12-08ARM: mvebu: Enable NAND controller in ReadyNAS 102 .dts fileArnaud Ebalard1-0/+36
Now that NAND controller support is available for Armada 370 (cb28e2537a6f: ARM: mvebu: Add support for NAND controller in Armada 370/XP), this patch enables support for ReadyNAS 102 and defines default partition layout as delivered by NETGEAR. As described in similar commits 2be2bc39c6f0 (ARM: mvebu: Enable NAND controller in Armada XP GP board) and d8c552dddfbf (ARM: mvebu: Enable NAND controller in Armada 370 Mirabox), "marvell,keep-config" parameter is used as current support does not allow for setting of timing parameters yet. Signed-off-by: Arnaud Ebalard <arno@natisbad.org> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2013-12-02ARM: mvebu: Fix whitespace in NETGEAR ReadyNAS .dts filesArnaud Ebalard1-0/+1
This patch provides some whitespace cleanup for NETGEAR ReadyNAS Duo v2 and 102 .dts files: - Fixed bad spaces - Added some space between nodes to improve readability Signed-off-by: Arnaud Ebalard <arno@natisbad.org> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2013-12-02ARM: mvebu: NETGEAR ReadyNAS 102 .dts cleanupArnaud Ebalard1-33/+48
The patch does some cleanup work on NETGEAR ReadyNAS 102 .dts file. Changes are listed below - Added missing button mpp in pinctrl - Converted from value to macros for GPIO voltage level - Converted all numeric input key values to macros - Added GPIO keys pins to pinctrl - Made button names more explicit - Document ethernet PHY (Marvell 88E1318) via a comment - Made G762 clock node name unique by including g762 in it - Fixed all node names and labels to use respectively '-' and '_' - Changed order of included files from general to local - Removed useless clocks and gpio-keys properties Signed-off-by: Arnaud Ebalard <arno@natisbad.org> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2013-11-23ARM: mvebu: dts: remove unneeded linux,default-state from led nodesJason Cooper1-1/+1
Generally, power LEDs should indicate when power is applied, and go out once power is removed. _Not_ annoy the developer with migraine-inducing blinking reminicent of some badly animated television series designed to sell sugar to children. On a more serious note, most of these OS-specific properties aren't necessary and should be removed. I left two that are legitimately tying disk LEDs to disk activity. Other than that, we keep the state the bootloader left them in until userspace changes the state via sysfs. Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2013-10-01ARM: mvebu: add missing DT Mbus ranges and relocate PCIe DT nodes for RN102Arnaud Ebalard1-16/+19
When 5e12a613 and 0cd3754a were introduced, Netgear ReadyNAS 102 .dts file was queued for inclusion and missed the update to have Mbus (and then BootROM) ranges properties declared. It also missed the relocation of Armada 370/XP PCIe DT nodes introduced by 14fd8ed0 after de1af8d4. This patch fixes that which makes 3.12-rc3 bootable on the NAS. Signed-off-by: Arnaud Ebalard <arno@natisbad.org> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2013-09-30ARM: mvebu: Add DT entry for ReadyNAS 102 to use gpio-poweroff driverArnaud Ebalard1-0/+12
Without that fix, at the end of the shutdown process, the board is still powered (led glowing, fan running, ...). Signed-off-by: Arnaud Ebalard <arno@natisbad.org> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2013-09-30ARM: mvebu: fix ReadyNAS 102 Power button GPIO to make it active highArnaud Ebalard1-1/+1
NETGEAR ReadyNAS 102 Power button definition in .dts file flags associated GPIO active low instead of active high. This results in reversed events reported by input subsystem (0 returned when the button is pressed, 1 when released). This patch makes associated GPIO active high to recover correct behaviour. Signed-off-by: Arnaud Ebalard <arno@natisbad.org> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2013-08-16ARM: mvebu: use dts pre-processor for readynas 102Jason Cooper1-1/+1
Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2013-08-05ARM: mvebu: Add Netgear ReadyNAS 102 boardArnaud Ebalard1-0/+179
All hardware parts of the (Armada 370 based) NETGEAR ReadyNAS 102 are supported by mainline kernel (USB 3.0 rear ports, USB 2.0 front port, Gigabit controller and PHY, serial port, leds, buttons, SATA ports, G762 fan controller) except for: - the Intersil ISL12057 I2C RTC Chip, - the Armada NAND controller. Support for both of those is currently work in progress and does not prevent boot. Signed-off-by: Arnaud Ebalard <arno@natisbad.org> Acked-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Signed-off-by: Jason Cooper <jason@lakedaemon.net>