summaryrefslogtreecommitdiff
path: root/arch/arm/boot/dts/imx6qdl-sabresd.dtsi
AgeCommit message (Expand)AuthorFilesLines
2015-10-19ARM: dts: imx: add "jedec,spi-nor" flash compatible bindingRafał Miłecki1-1/+1
2015-09-01Merge tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/ar...Linus Torvalds1-0/+7
2015-08-11ARM: dts: imx6qdl-sabresd: Allow HDMI and LVDS to work simultaneouslyFabio Estevam1-0/+7
2015-07-24dts: imx6: fix sd card gpio polarity specified in device treeDong Aisheng1-4/+4
2015-03-11ARM: imx6qdl-sabresd: set swbst_reg as vbus's parent regPeter Chen1-0/+2
2014-12-10Merge tag 'dt-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm...Linus Torvalds1-0/+4
2014-11-23ARM: dts: imx6: add pm_power_off support for i.mx6 chipsRobin Gong1-0/+4
2014-11-22ARM: dts: imx6qdl-sabresd: Fix the microphone routeFabio Estevam1-4/+2
2014-11-22ARM: dts: imx6qdl-sabresd: Use IMX6QDL_CLK_CKO defineFabio Estevam1-1/+1
2014-09-16ARM: dts: imx6qdl-sabresd: Configure the pins locallyFabio Estevam1-13/+13
2014-09-16ARM: dts: imx6qdl-sabresd: add always on pcie regulatorLucas Stach1-0/+19
2014-07-18ARM: dts: imx: remove ssi fsl,mode for audio cardsMarkus Pargmann1-1/+0
2014-07-18ARM: dts: imx6qdl-sabresd: Configure the ECSPI1 chip select pinFabio Estevam1-0/+1
2014-05-16ARM: dts: imx6qdl-sabresd: Add USDHC4 supportFabio Estevam1-0/+24
2014-05-16ARM: dts: Add stdout-path property to i.MX boardsSascha Hauer1-0/+4
2014-05-16ARM: dts: imx6qdl-sabresd: remove power-on gpio from pcieLucas Stach1-2/+0
2014-05-16ARM: dts: imx6qdl-sabresd: Add PCIe supportMarek Vasut1-0/+15
2014-05-16ARM: dts: imx6qdl-sabresd: Add HDMI supportFabio Estevam1-0/+5
2014-04-30ARM: dts: imx6qdl-sabresd.dtsi: Add red ledVincent Stehlé1-0/+19
2014-02-10ARM: dts: imx6qdl-sabresd: correct gpio key's active stateAnson Huang1-3/+4
2014-02-10ARM: dts: imx6qdl-sabresd: Add PFUZE100 supportFabio Estevam1-0/+113
2014-02-09ARM: dts: imx6qdl-sabresd: Add power key supportAnson Huang1-4/+21
2014-02-09ARM: dts: imx: specify the value of audmux pinctrl instead of 0x80000000Nicolin Chen1-4/+4
2014-02-09ARM: dts: imx6: use generic node name for fixed regulatorShawn Guo1-3/+8
2014-02-09ARM: dts: imx6qdl: make pinctrl nodes board specificShawn Guo1-11/+112
2013-10-12ARM: dts: imx6qdl-sabresd: Add backlight support for lvdsRogerio Pimentel1-0/+14
2013-09-29ARM: dts: imx6qdl-sabresd: Provide phy-reset-gpiosFabio Estevam1-0/+2
2013-09-26ARM: dts: imx6qdl-sabresd: SDHC ports are 8 bit-wideFabio Estevam1-0/+2
2013-08-22ARM: dtsi: imx6qdl-sabresd: Add USB OTG vbus pin to pinctrl_hogPeter Chen1-0/+1
2013-08-22ARM: dtsi: imx6qdl-sabresd: Add USB host 1 VBUS regulatorPeter Chen1-0/+11
2013-08-22ARM: dts: imx6qdl-sabresd: Add touchscreen supportFabio Estevam1-0/+16
2013-08-22ARM: dts: imx6qdl-sabresd: Allow buttons to wake-up the systemFabio Estevam1-0/+2
2013-08-22ARM: imx6q: remove board specific CLKO setupShawn Guo1-1/+1
2013-08-22ARM: dts: imx: add LVDS panel for imx6qdl-sabresdShawn Guo1-0/+25
2013-08-22ARM: dts: imx: share pad macro names between imx6q and imx6dlShawn Guo1-0/+19
2013-08-22ARM: dts: imx6qdl-sabresd: enable the SPI NORHuang Shijie1-0/+16
2013-06-17ARM: dtsi: imx6qdl-sabresd: Enable WM8962 audio supportNicolin Chen1-0/+19
2013-06-17ARM: dtsi: imx6qdl-sabresd: Enable SSI2 and AUDMUXNicolin Chen1-0/+11
2013-06-17ARM: dtsi: imx6qdl-sabresd: Add WM8962 CODEC supportNicolin Chen1-0/+29
2013-06-17ARM: dtsi: imx6qdl-sabresd: add a fixed regulator for WM8962Nicolin Chen1-0/+7
2013-04-09ARM: dts: imx: make sabreauto and sabresd commonShawn Guo1-0/+87