summaryrefslogtreecommitdiff
path: root/arch/arm/boot/dts/meson8b.dtsi
AgeCommit message (Collapse)AuthorFilesLines
2020-01-08ARM: dts: meson8b: use the actual frequency for the GPU's 364MHz OPPMartin Blumenstingl1-2/+2
The clock setup on Meson8 cannot achieve a Mali frequency of exactly 182.15MHz. The vendor driver uses "FCLK_DIV7 / 1" for this frequency, which translates to 2550MHz / 7 / 1 = 364285714Hz. Update the GPU operating point to that specific frequency to not confuse myself when comparing the frequency from the .dts with the actual clock rate on the system. Fixes: c3ea80b6138cae ("ARM: dts: meson8b: add the Mali-450 MP2 GPU") Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2020-01-08ARM: dts: meson8b: fix the clock controller compatible stringMartin Blumenstingl1-1/+1
The Meson8b clock controller is an evolution of the Meson8 clock controller. The clock controller on Meson8b contains two identical mali clock trees for glitch-free rate switching. Use the correct compatible string to make use of the glitch free mux. Fixes: b6db3936f2833c ("ARM: dts: meson: switch the clock controller to the HHI register area") Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2019-12-11ARM: dts: meson8b: add the DDR clock controllerMartin Blumenstingl1-2/+11
Add the DDR clock controller and pass it's DDR_CLKID_DDR_PLL to the main (HHI) clock controller as "ddr_clk". The "ddr_clk" is used as one of the inputs for the audio clock muxes. Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2019-12-11ARM: dts: meson: provide the XTAL clock using a fixed-clockMartin Blumenstingl1-7/+8
The clock controller driver has provided the XTAL clock so far. This does not match how the hardware actually works because the XTAL clock is an actual crystal which is mounted on the PCB. Add the "xtal" clock to meson.dtsi and replace all references to the clock controller's CLKID_XTAL with the new xtal clock node. Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2019-08-06ARM: dts: meson8b: add the PWM_D output pinMartin Blumenstingl1-0/+8
The PWM_D output is used for the VDDEE PWM regulator which supplies for example the Mali GPU on the EC-100 and Odroid-C1 boards. Add the output pin the VDDEE regulators can be added. Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2019-08-06ARM: dts: meson8b: add ethernet fifo sizesJerome Brunet1-0/+2
If unspecified in DT, the fifo sizes are not automatically detected by the dwmac1000 dma driver and the reported fifo sizes default to 0. Because of this, flow control will be turned off on the device. Add the fifo sizes provided by the datasheet in the SoC in DT so flow control may be enabled if necessary. Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Reviewed-by: Kevin Hilman <khilman@baylibre.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2019-07-20Merge tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/socLinus Torvalds1-41/+23
Pull ARM Devicetree updates from Olof Johansson: "We continue to see a lot of new material. I've highlighted some of it below, but there's been more beyond that as well. One of the sweeping changes is that many boards have seen their ARM Mali GPU devices added to device trees, since the DRM drivers have now been merged. So, with the caveat that I have surely missed several great contributions, here's a collection of the material this time around: New SoCs: - Mediatek mt8183 (4x Cortex-A73 + 4x Cortex-A53) - TI J721E (2x Cortex-A72 + 3x Cortex-R5F + 3 DSPs + MMA) - Amlogic G12B (4x Cortex-A73 + 2x Cortex-A53) New Boards / platforms: - Aspeed BMC support for a number of new server platforms - Kontron SMARC SoM (several i.MX6 versions) - Novtech's Meerkat96 (i.MX7) - ST Micro Avenger96 board - Hardkernel ODROID-N2 (Amlogic G12B) - Purism Librem5 devkit (i.MX8MQ) - Google Cheza (Qualcomm SDM845) - Qualcomm Dragonboard 845c (Qualcomm SDM845) - Hugsun X99 TV Box (Rockchip RK3399) - Khadas Edge/Edge-V/Captain (Rockchip RK3399) Updated / expanded boards and platforms: - Renesas r7s9210 has a lot of new peripherals added - Fixes and polish for Rockchip-based Chromebooks - Amlogic G12A has a lot of peripherals added - Nvidia Jetson Nano sees various fixes and improvements, and is now at feature parity with TX1" * tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (586 commits) ARM: dts: gemini: Set DIR-685 SPI CS as active low ARM: dts: exynos: Adjust buck[78] regulators to supported values on Arndale Octa ARM: dts: exynos: Adjust buck[78] regulators to supported values on Odroid XU3 family ARM: dts: exynos: Move Mali400 GPU node to "/soc" ARM: dts: exynos: Fix imprecise abort on Mali GPU probe on Exynos4210 arm64: dts: qcom: qcs404: Add missing space for cooling-cells property arm64: dts: rockchip: Fix USB3 Type-C on rk3399-sapphire arm64: dts: rockchip: Update DWC3 modules on RK3399 SoCs arm64: dts: rockchip: enable rk3328 watchdog clock ARM: dts: rockchip: add display nodes for rk322x ARM: dts: rockchip: fix vop iommu-cells on rk322x arm64: dts: rockchip: Add support for Hugsun X99 TV Box arm64: dts: rockchip: Define values for the IPA governor for rock960 arm64: dts: rockchip: Fix multiple thermal zones conflict in rk3399.dtsi arm64: dts: rockchip: add core dtsi file for RK3399Pro SoCs arm64: dts: rockchip: improve rk3328-roc-cc rgmii performance. Revert "ARM: dts: rockchip: set PWM delay backlight settings for Minnie" ARM: dts: rockchip: Configure BT_DEV_WAKE in on rk3288-veyron arm64: dts: qcom: sdm845-cheza: add initial cheza dt ARM: dts: msm8974-FP2: Add vibration motor ...
2019-06-04ARM: dts: meson8b: update with SPDX Licence identifierNeil Armstrong1-41/+1
While the text specifies "of the GPL or the X11 license" the actual license text matches the MIT license as specified at [0] [0] https://spdx.org/licenses/MIT.html Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2019-05-23ARM: dts: meson8b: add the canvas moduleMartin Blumenstingl1-0/+22
Add the canvas module to Meson8b because it's required for the VPU (video output) and video decoders. The canvas module is located inside the "DMC bus" (where also some of the memory controller registers are located). The "DMC bus" itself is part of the so-called "MMC bus". Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2019-05-20ARM: dts: meson8b: fix the operating voltage of the Mali GPUMartin Blumenstingl1-5/+5
Amlogic's vendor kernel defines an OPP for the GPU on Meson8b boards with a voltage of 1.15V. It turns out that the vendor kernel relies on the bootloader to set up the voltage. The bootloader however sets a fixed voltage of 1.10V. Amlogic's patched u-boot sources (uboot-2015-01-15-23a3562521) confirm this: $ grep -oiE "VDD(EE|AO)_VOLTAGE[ ]+[0-9]+" board/amlogic/configs/m8b_* board/amlogic/configs/m8b_m100_v1.h:VDDAO_VOLTAGE 1100 board/amlogic/configs/m8b_m101_v1.h:VDDAO_VOLTAGE 1100 board/amlogic/configs/m8b_m102_v1.h:VDDAO_VOLTAGE 1100 board/amlogic/configs/m8b_m200_v1.h:VDDAO_VOLTAGE 1100 board/amlogic/configs/m8b_m201_v1.h:VDDEE_VOLTAGE 1100 board/amlogic/configs/m8b_m201_v1.h:VDDEE_VOLTAGE 1100 board/amlogic/configs/m8b_m202_v1.h:VDDEE_VOLTAGE 1100 Another hint at this is the VDDEE voltage on the EC-100 and Odroid-C1 boards. The VDDEE regulator supplies the Mali GPU. It's basically a copy of the VCCK (CPU supply) which means it's limited to 0.86V to 1.14V. Update the operating voltage of the Mali GPU on Meson8b to 1.10V so it matches with what the vendor u-boot sets. Fixes: c3ea80b6138cae ("ARM: dts: meson8b: add the Mali-450 MP2 GPU") Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2019-05-20ARM: dts: meson8b: drop undocumented property from the Mali GPU nodeMartin Blumenstingl1-1/+0
Drop the undocumented "switch-delay" which is a left-over from my experiments with an early lima kernel driver when it was still out-of-tree and required this property on Amlogic SoCs. Fixes: c3ea80b6138cae ("ARM: dts: meson8b: add the Mali-450 MP2 GPU") Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2019-04-16ARM: dts: meson: add support for the RTCMartin Blumenstingl1-0/+5
The 32-bit Meson SoCs have an RTC block in the AO (always on) area. The RTC requires an external 32.768 kHz oscillator to work properly. Whether or not this crystal exists depends on the board, so it has to be added for each board.dts (instead of adding it somewhere in a generic .dtsi). Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2019-03-18ARM: dts: meson8b: add the internal clock measurerMartin Blumenstingl1-0/+5
The Amlogic Meson8b SoC has an internal clock measurer IP which allows measuring frequencies of various clock paths. Enable it on meson8b.dtsi so we can use it. Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2019-02-11ARM: dts: meson8b: add the temperature calibration data for the SAR ADCMartin Blumenstingl1-0/+8
The SAR ADC can measure the chip temperature of the SoC. This only works if the chip is calibrated and if the calibration data is written to the correct registers. The calibration data is stored in the upper two bytes of eFuse offset 0x1f4. This adds the eFuse cell for the temperature calibration data and passes it to the SAR ADC. We also need to pass the HHI sysctrl node to the SAR ADC because the 4th TSC (temperature sensor calibration coefficient) bit is stored in the HHI region (unlike bits [3:0] which are stored directly inside the SAR ADC's register area). On boards that have the SAR ADC enabled channel 8 can be used to measure the chip temperature. Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2019-02-11ARM: dts: meson: switch the clock controller to the HHI register areaMartin Blumenstingl1-7/+8
The clock controller on Meson8/Meson8m2 and Meson8b is part of a register region called "HHI". This register area contains more functionality than just a clock controller: - the clock controller - some reset controller bits - temperature sensor calibration data (on Meson8b and Meson8m2 only) - HDMI controller Allow access to this HHI register area as "system controller". Also migrate the Meson8 and Meson8b clock controllers to this new node. Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Acked-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2019-02-11ARM: dts: meson8b: fix the Ethernet data line signals in eth_rgmii_pinsMartin Blumenstingl1-3/+3
According to the Odroid-C1+ schematics the Ethernet TXD1 signal is routed to GPIOH_5 and the TXD0 signal is routed to GPIOH_6. The public S805 datasheet shows that TXD0 can be routed to DIF_2_P and TXD1 can be routed to DIF_2_N instead. The pin groups eth_txd0_0 (GPIOH_6) and eth_txd0_1 (DIF_2_P) are both configured as Ethernet TXD0 and TXD1 data lines in meson8b.dtsi. At the same time eth_txd1_0 (GPIOH_5) and eth_txd1_1 (DIF_2_N) are configured as TXD0 and TXD1 data lines as well. This results in a bad Ethernet receive performance. Presumably this is due to the eth_txd0 and eth_txd1 signal being routed to the wrong pins. As a result of that data can only be transmitted on eth_txd2 and eth_txd3. However, I have no scope to fully confirm this assumption. The vendor u-boot sources for Odroid-C1 use the following Ethernet pinmux configuration: SET_CBUS_REG_MASK(PERIPHS_PIN_MUX_6, 0x3f4f); SET_CBUS_REG_MASK(PERIPHS_PIN_MUX_7, 0xf00000); This translates to the following pin groups in the mainline kernel: - register 6 bit 0: eth_rxd1 (DIF_0_P) - register 6 bit 1: eth_rxd0 (DIF_0_N) - register 6 bit 2: eth_rx_dv (DIF_1_P) - register 6 bit 3: eth_rx_clk (DIF_1_N) - register 6 bit 6: eth_tx_en (DIF_3_P) - register 6 bit 8: eth_ref_clk (DIF_3_N) - register 6 bit 9: eth_mdc (DIF_4_P) - register 6 bit 10: eth_mdio_en (DIF_4_N) - register 6 bit 11: eth_tx_clk (GPIOH_9) - register 6 bit 12: eth_txd2 (GPIOH_8) - register 6 bit 13: eth_txd3 (GPIOH_7) - register 7 bit 20: eth_txd0_0 (GPIOH_6) - register 7 bit 21: eth_txd1_0 (GPIOH_5) - register 7 bit 22: eth_rxd3 (DIF_2_P) - register 7 bit 23: eth_rxd2 (DIF_2_N) Drop the eth_txd0_1 and eth_txd1_1 groups from eth_rgmii_pins to fix the Ethernet transmit performance on Odroid-C1. Also add the eth_rxd2 and eth_rxd3 groups so we don't rely on the bootloader to set them up. iperf3 statistics before this change: - transmitting from Odroid-C1: 741 Mbits/sec (0 retries) - receiving on Odroid-C1: 199 Mbits/sec (1713 retries) iperf3 statistics after this change: - transmitting from Odroid-C1: 667 Mbits/sec (0 retries) - receiving on Odroid-C1: 750 Mbits/sec (0 retries) Fixes: b96446541d8390 ("ARM: dts: meson8b: extend ethernet controller description") Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Cc: Emiliano Ingrassia <ingrassia@epigenesys.com> Cc: Linus Lüssing <linus.luessing@c0d3.blue> Tested-by: Emiliano Ingrassia <ingrassia@epigenesys.com> Reviewed-by: Emiliano Ingrassia <ingrassia@epigenesys.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2019-01-11ARM: dts: meson8b: add the Mali-450 MP2 GPUMartin Blumenstingl1-0/+46
Add the Mali-450 GPU and it's OPP table for Meson8. The GPU uses two pixel processors in this configuration. The OPP table is taken from the 3.10 vendor kernel which uses the following table: FCLK_DEV5 | 1, /* 255 Mhz */ FCLK_DEV7 | 0, /* 364 Mhz */ FCLK_DEV3 | 1, /* 425 Mhz */ FCLK_DEV5 | 0, /* 510 Mhz */ FCLK_DEV4 | 0, /* 637.5 Mhz */ This describes the mux (FCLK_DEVx) and a 0-based divider in the clock controller. "FCLK" is "fixed_pll" which is running at 2550MHz. The "turbo" setting is described by "turbo_clock = 4" where 4 is the index of the table above. Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2019-01-11ARM: dts: meson8b: add the APB busMartin Blumenstingl1-0/+8
Various peripherals (Mali GPU, NAND controller, VPU; etc.) are located in the APB bus. Describe this bus so we can add devices to it. Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2018-12-05ARM: dts: meson: meson8b: add the CPU OPP tablesMartin Blumenstingl1-0/+66
The values are taken from Amlogic's 3.10 kernel sources. Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2018-12-05ARM: dts: meson8b: add the Cortex-A5 global timerMartin Blumenstingl1-0/+13
The Meson8b SoC is using four Cortex-A5 cores. These come with an ARM global timer. This adds the Cortex-A5 global timer but keeps it disabled for now. The timer is clocked by the "PERIPH" clock whose rate can change during runtime (when changing the frequency of the CPU clock). Unfortunately the arm_global_timer driver does not handle changes to the clock rate yet. Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2018-12-05ARM: dts: meson8b: add the ARM TWD timerMartin Blumenstingl1-0/+7
The Meson8B SoC is using four ARM Cortex-A5 cores which come with a "TWD" (Timer-Watchdog) based timer. This adds support for the ARM TWD Timer on this SoC. Suggested-by: Carlo Caione <carlo@endlessm.com> [ rebased patch from Carlo, use IRQ_TYPE_EDGE_RISING instead of IRQ_TYPE_LEVEL_LOW to prevent "GIC: PPI13 is secure or misconfigured" message during boot, use pre-processor macros to specify the IRQ, added the correct clock, dropped TWD watchdog node since there's no driver for it anymore ] Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2018-12-05ARM: dts: meson: group the Cortex-A5 / Cortex-A9 peripheralsMartin Blumenstingl1-5/+7
The public Meson8b (S805) datasheet describes a memory region called "A9 Periph base" which starts at 0xC4300000 and ends at 0xC430FFFF. Add a simple-bus node and move all peripherals that are part of this memory region. This makes the .dts a bit easier to read. No functional changes. Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2018-11-29ARM: dts: meson: add the clock inputs for the Meson timerMartin Blumenstingl1-0/+5
The Meson Timer IP block has two clock inputs: - clk81 for using the system clock as timebase - xtal for a timebase with 1us, 10us, 100us and 1ms resolution The clocksource driver does not use these yet, but it's still a good idea to add them as this describes how the hardware actually works internally. Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2018-11-29ARM: dts: meson: consistently disable pin biasJerome Brunet1-0/+9
On Amlogic chipsets, the bias set through pinconf applies to the pad itself, not only the GPIO function. This means that even when we change the function of the pad from GPIO to anything else, the bias previously set still applies. As we have seen with the eMMC, depending on the bias type and the function, it may trigger problems. The underlying issue is that we inherit whatever was left by previous user of the pad (pinconf, u-boot or the ROM code). As a consequence, the actual setup we will get is undefined. There is nothing mentioned in the documentation about pad bias and pinmux function, however leaving it undefined is not an option. This change consistently disable the pad bias for every pinmux functions. It seems to work well, we can only assume that the necessary bias (if any) is already provided by the pin function itself. Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Acked-by: Martin Blumenstingl<martin.blumenstingl@googlemail.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2018-09-26ARM: dts: meson8b: add the RMII pinsMartin Blumenstingl1-0/+15
Some boards use an RMII Ethernet PHY which requires fewer pins than the RGMII PHYs. Add a separate eth_rmii_pins node which does not include the pins which are only required for RGMII (but not for RMII) PHYs. Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2018-09-26ARM: dts: meson8b: add the I2C_A, PWM_C and UART_B pinsMartin Blumenstingl1-0/+30
These are used for example on the Endless Mini (EC-100): - I2C_A is connected to the Realtek RT5640 audio codec - PWM_C (GPIODV_9) is connected to a PWM regulator which is used for VCCK (CPU voltage supply) - UART_B is connected to the Bluetooth module (of the RTL8723BS SDIO wifi and Bluetooth combo chip) Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2018-09-05ARM: dts: meson8b: fix the clock controller register sizeMartin Blumenstingl1-1/+1
The clock controller registers are not 0x460 wide because the reset controller starts at CBUS 0x4404. This currently overlaps with the clock controller (which is at CBUS 0x4000). There is no public documentation available on the actual size of the clock controller's register area (also called "HHI"). However, in Amlogic's GPL kernel sources the last "HHI" register is HHI_HDMI_PHY_CNTL2 at CBUS + 0x43a8. 0x400 was chosen because that size doesn't seem unlikely. Fixes: 4a69fcd3a10803 ("ARM: meson: Add DTS for Odroid-C1 and Tronfy MXQ boards") Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2018-05-10ARM: dts: meson8b: odroid-c1: enable the IR receiverMartin Blumenstingl1-0/+7
The Odroid-C1 comes with an IR receiver. It is connected to the GPIOAO_7 pin and thus using the SoC's internal IR decoder. Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2018-04-27ARM: dts: meson8b: add the cortex-a5-pmu compatible PMUMartin Blumenstingl1-4/+13
Enable the performance monitor unit on Meson8b. Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2018-03-21ARM: dts: meson8b: the CBUS GPIO controller only has 83 GPIOsMartin Blumenstingl1-1/+1
Update the "gpio-ranges" property of the CBUS GPIO controller on Meson8b because it only provides 83 GPIOs. The GPIO definitions in include/dt-bindings/gpio/meson8b-gpio.h inherited all GPIOs from Meson8 until recently. However, Meson8b does not support all GPIOs which are supported by Meson8 (Meson8b doesn't have a GPIOZ bank, most of the pins from the GPIODV bank are missing on Meson8b - just to name a few differences). The actual number of GPIOs is only 83, instead of 120 from Meson8 plus the 10 GPIOs from the DIF bank on Meson8b. Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Reviewed-by: Jerome Brunet <jbrunet@baylibre.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2018-03-21ARM: dts: meson8b-odroidc1: add microSD supportLinus Lüssing1-0/+8
The Odroid C1 features a microSD slot. This patch adds the necessary DT bindings to support it. Signed-off-by: Linus Lüssing <linus.luessing@c0d3.blue> Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2018-03-08ARM: dts: meson8b: add the I2C clocksMartin Blumenstingl1-0/+12
Add the I2C clocks so the I2C busses can be used. The clock input is not device specific (the AO I2C bus uses clk81 as input, while the two I2C busses in CBUS have a separate "CLKID_I2C" gate, provided by the clock controller. Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2018-02-13ARM: dts: meson8b: extend ethernet controller descriptionEmiliano Ingrassia1-2/+33
Enable S805 (aka Meson8b) ethernet pin multiplexing and extend the controller description. The programmable ethernet (PRG_ETHERNET) register address value (0xc1108108), contained in meson.dtsi, is overridden according to the value found in S805 SoC manual. This also required to switch to "amlogic,meson8b-dwmac" compatible to correctly configure that register. The two clock sources "clkin0" and "clkin1" are both equals to MPLL2 because, as reported in bit 9-7 register description, that is the only Meson8b ethernet clock source. Signed-off-by: Emiliano Ingrassia <ingrassia@epigenesys.com> Tested-by: Linus Lüssing <linus.luessing@c0d3.blue> Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2018-02-13ARM: dts: meson8b: grow the reset controller memory zoneMartin Blumenstingl1-1/+1
The reset controller in the Meson8b SoCs also supports level resets. These use the same defines (from dt-bindings/reset/amlogic,meson8b-reset.h) as the reset pulses. The reset-meson driver internally handles the difference if a consumer requests a reset pulse or a level reset. However, for this to work we must extend the memory zone of the reset controller. Suggested-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2017-12-07ARM: dts: meson8b: use stable UART bindings with correct gate clockMartin Blumenstingl1-4/+12
Switch to the stable UART bindings and add the correct gate clocks to the non-AO UART nodes. This fixes the non-AO UARTs if the bootloader didn't un-gate the clocks. Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Acked-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2017-12-07ARM: dts: meson: drop "sana" clock from SAR ADCXingyu Chen1-3/+2
The SAR ADC modules doesn't require The "sana" clock. Acked-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Xingyu Chen <xingyu.chen@amlogic.com> Signed-off-by: Yixun Lan <yixun.lan@amlogic.com> Tested-by: Kevin Hilman <khilman@baylibre.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2017-12-07ARM: dts: meson8b: add more L2 cache settingsMartin Blumenstingl1-0/+3
Amlogic's vendor kernel prints these PL310 L2 cache controller settings during boot: 8 ways, 2048 sets, CACHE_ID 0x4100a0c9, Cache size: 524288 B AUX_CTRL 0x7ec60001, PERFETCH_CTRL 0x75000007, POWER_CTRL 0x00000000 TAG_LATENCY 0x00000111, DATA_LATENCY 0x00000222 Add the "prefetch-data", "prefetch-instr" and "arm,shared-override" properties to get the same L2 cache controller configuration as the vendor kernel. Four differences still remain: - L310_AUX_CTRL_EARLY_BRESP is enabled by the vendor kernel, however this is only supported on Cortex-A9 cores (Meson8b has Cortex-A5 cores though) - L310_AUX_CTRL_NS_INT_CTRL is currently not supported by the cache-l2x0 driver - bit 23 is set by the vendor kernel, but this is defined in cache-l2x0.h - L310_AUX_CTRL_FULL_LINE_ZERO is enabled by the vendor kernel which is also only supported on Cortex-A9 cores Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Tested-by: Kevin Hilman <khilman@baylibre.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2017-10-30Merge tag 'amlogic-dt64' of ↵Arnd Bergmann1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic into next/dt Pull "Amlogic 64-bit platforms: DT updates for v4.15" from Kevin Hilman: - new SoC support: A113D - new boards: Tronsmart Vega S96, Khadas vim2 - reserved memory fixups - gpio-names cleanups - MMC cleanups, enable high-speed modes - misc cleanups * tag 'amlogic-dt64' of git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic: arm64: dts: meson-axg: add initial A113D SoC DT support dt-bindings: arm: amlogic: Add Meson AXG binding ARM64: dts: meson-gx: remove unnecessary uart compatible ARM64: dts: meson-gx: remove unnecessary clocks properties ARM64: dts: meson-gxl: Add alternate ARM Trusted Firmware reserved memory zone ARM64: dts: meson-gxm: enable HS400 on the vim2 ARM64: dts: meson-gxbb-nexbox-a95x: Enable USB Nodes dt-bindings: arm: amlogic: Add Tronsmart Vega S96 binding ARM64: dts: meson-gxm: Add Vega S96 board ARM64: dts: meson-gxm: Add support for Khadas VIM2 ARM64: dts: meson-gxl: Take eMMC data strobe out of eMMC pins ARM64: dts: meson-gxl: adjust libretech-cc gpio-line-names ARM64: dts: meson-gxl: adjust kvim gpio-line-names ARM64: dts: meson-gxbb: adjust odroid-c2 gpio-line-names ARM64: dts: meson-gxbb: adjust nanopi-k2 gpio-line-names ARM64: dts: meson-gx: adjust gpio-ranges for TEST_N ARM64: dts: meson-gx: remove gpio offset ARM: dts: meson8: remove gpio offset ARM64: dts: meson-gxl-libretech-cc: enable internal phy leds ARM64: dts: meson-gxl-libretech-cc: enable saradc
2017-10-29ARM: dts: meson: add the efuse nodeMartin Blumenstingl1-0/+7
Meson6, Meson8 and Meson8b use a similar IP block which has access to 512 bytes of efuse data. During SoC manufacturing some calibration settings for the CVBS connector and the internal temperature sensor are written to this efuse. On some boards it additionally stores for example the MAC addresses. The efuse is enabled on Meson8 and Meson8b but kept disabled on Meson6 since we do not have a clock driver there (which is required to read data from the efuse). Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2017-10-29ARM: dts: meson8b: enable gpio interrupt controllerJerome Brunet1-0/+6
Add gpio interrupt controller node to the meson8b boards Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2017-10-29ARM: dts: meson8b: add support for booting the secondary CPU coresCarlo Caione1-0/+21
Booting the secondary CPU cores involves the following nodes/devices: - SCU (Snoop-Control-Unit, for which we already have a DT node) - a reset line for each CPU core, provided by the reset-controller which is built into the clock-controller - the PMU (power management unit) which controls the power of the CPU cores - a range in the SRAM specifically reserved for booting secondary CPU cores - the "enable-method" which activates booting the secondary CPU cores This adds all required nodes and properties to boot the secondary CPU cores. Signed-off-by: Carlo Caione <carlo@caione.org> Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Tested-by: Linus Lüssing <linus.luessing@c0d3.blue> Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2017-10-12ARM: dts: meson: add the SDIO MMC controllerMartin Blumenstingl1-0/+6
Meson6, Meson8 and Meson8b are using the same MMC controller IP. This adds the MMC controller node to meson.dtsi so it can be used by all SoCs. The controller itself is a bit special, because it has multiple slots. Each slot is accessed through a sub-node of the controller. However, currently the driver for this hardware only supports one slot. Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2017-10-12ARM: dts: meson8: remove gpio offsetJerome Brunet1-1/+1
Remove pin offset on the AO controller. meson pinctrl no longer has this quirk Tested-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2017-10-07ARM: dts: meson8b: add reserved memory zone to fix silent freezesLinus Lüssing1-0/+12
So far, the stress-ng tool for instance quickly resulted in a silent freeze of the system with no prior notice on a serial console when running its filesystem or memory stressor classes. Even with a panic-on-OOM and reboot-on-panic (vm.panic_on_oom=1, kernel.panic=10) configured, the system would neither reboot nor would the OOM killer get any chance to otherwise do its job. The Amlogic reference source code uses a 2MB PHYS_OFFSET. With these 2MB reserved via DT, stress-ng was able to run on an Odroid C1+ just fine for several hours, the OOM killer was able to kill processes again and if configured would successfully trigger a reboot of the system. Fixes: 4a69fcd3a108 ("ARM: meson: Add DTS for Odroid-C1 and Tronfy MXQ boards") Signed-off-by: Linus Lüssing <linus.luessing@c0d3.blue> Acked-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2017-10-07ARM: dts: meson: add SoC information nodesMartin Blumenstingl1-0/+5
The SoC type and version information is encoded in different register blocks. The SoC type information is part of the "assist" registers. The misc version information is part of the "bootrom" registers. On Meson8, Meson8b and Meson8m2 there is additionally information about the minor version. This information is stored in the "analog top" registers. Add the nodes for these register blocks so we can decode the SoC type and version information. Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2017-08-01ARM: dts: meson: mark the clock controller also as reset controllerMartin Blumenstingl1-0/+1
The clock controller provides a few reset lines as well. Add the corresponding CPU cores. Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2017-07-28ARM: dts: meson8b: use the existing wdt node to override the compatibleMartin Blumenstingl1-6/+4
Meson8b has to define it's own compatible string for the watchdog. This patch removes the duplicate resource (register region and interrupt) definition from meson8b.dtsi and simply re-uses these values from meson.dtsi (as the register offset, size and interrupt are identical). This is purely cosmetic and does not change any functionality. Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2017-07-28ARM: dts: move the pwm_ab and pwm_cd nodes to meson.dtsiMartin Blumenstingl1-14/+8
According to the vendor kernel sources these also exist (at the same address) on Meson6 and Meson8. This can be found by running $ grep -R "define PWM_PWM_[A-D]" arch/arm/ in the Amlogic GPL kernel tree (arm-src-kernel-2015-01-15-321cfb5a46). pwm_ef does not seem to exist on older SoCs, so we keep it in meson8b.dtsi for now. Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2017-06-16ARM: dts: meson: use the real ethernet clock on Meson8 and Meson8bMartin Blumenstingl1-0/+5
Until now clk81 was used as gate clock for the ethernet controller on Meson8 whereas Meson8b did not configure a gate clock at all. Use CLKID_ETH for both SoCs, which is the real gate clock for the ethernet controller. Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2017-06-16ARM: dts: meson8b: add the SCU device nodeMartin Blumenstingl1-0/+5
Amlogic's Meson8b SoC has a Snoop Control Unit (SCU), just like many other Cortex-A5 SoCs. Add the corresponding devicetree node so it can be used during SMP boot. Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com>