summaryrefslogtreecommitdiff
path: root/arch/arm/boot/dts/omap3-overo.dtsi
AgeCommit message (Collapse)AuthorFilesLines
2019-06-19treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 500Thomas Gleixner1-4/+1
Based on 2 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license version 2 as published by the free software foundation this program is free software you can redistribute it and or modify it under the terms of the gnu general public license version 2 as published by the free software foundation # extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 4122 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Enrico Weigelt <info@metux.net> Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Allison Randal <allison@lohutok.net> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190604081206.933168790@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-07-14ARM: dts: overo: Enable McBSP2 for all Overo COMsAdam YH Lee1-4/+0
Both Gumstix Overo and Overo Storm COMs use TWL4030 audio module connected to the McBSP2. As such, enable the McBSP2 module in the common device tree file, omap3-overo-base.dtsi, rather than in the processor-specific device tree files, omap3-overo.dtsi and omap3-overo-storm.dtsi. This corrects audio on the Storm COMs where the setting was accidentally missing from the device tree. Signed-off-by: Ash Charles <ashcharles@gmail.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2014-03-17Merge tag 'omap-for-v3.15/dt-overo-signed' of ↵Arnd Bergmann1-81/+18
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/dt Updates to the .dts files to support more Gumstix boards. These are sent separately from the rest of the .dts changes as these depend on the fixes merged into v3.14-rc4, and needed a bit more time to get updated on the fixes. * tag 'omap-for-v3.15/dt-overo-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: ARM: dts: Add support for the Overo Summit ARM: dts: Add support for the Overo Chestnut43 ARM: dts: Add support for the Overo Alto35 ARM: dts: Add support for the Overo Gallop43 ARM: dts: Add support for the Overo Palo43 ARM: dts: overo: Add LIS33DE accelerometer ARM: dts: overo: Create a file for common Gumstix peripherals ARM: dts: overo: Push uart3 pinmux down to expansion board ARM: dts: omap3-tobi: Add AT24C01 EEPROM ARM: dts: omap3-tobi: Use include file omap-gpmc-smsc9221 ARM: dts: omap: Add common file for SMSC9221 ARM: dts: omap3-overo: Add HSUSB PHY ARM: dts: omap3-overo: Enable WiFi/BT combo ARM: dts: omap3-overo: Add missing pinctrl ARM: dts: omap3-tobi: Add missing pinctrl ARM: dts: overo: reorganize include files Signed-off-by: Arnd Bergmann <arnd@arndb.de> Conflicts: arch/arm/boot/dts/omap3-overo.dtsi
2014-03-12ARM: dts: omap3-overo: Add HSUSB PHYFlorian Vaussard1-0/+16
Add the High-Speed USB PHY. Signed-off-by: Florian Vaussard <florian.vaussard@epfl.ch> Acked-by: Roger Quadros <rogerq@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2014-03-12ARM: dts: omap3-overo: Enable WiFi/BT comboFlorian Vaussard1-0/+8
MMC2 is used by the on-board WiFi module populated on some boards (based on Marvell Libertas 8688 SDIO). The Bluetooth is connected to UART2. Signed-off-by: Florian Vaussard <florian.vaussard@epfl.ch> Signed-off-by: Tony Lindgren <tony@atomide.com>
2014-03-12ARM: dts: overo: reorganize include filesFlorian Vaussard1-86/+3
Currently, overo-related include files are organized as follow: omap3-overo.dtsi | | omap34xx.dtsi omap3-overo-tobi-common.dtsi omap36xx.dtsi | | | | --------------- --------------- | | omap3-overo-tobi.dts omap3-overo-storm-tobi.dts This is unpractical when one has to deal with SoC-specific pinmux belonging to the omap3_pmx_core2 (defined in omap34xx/omap36xx), for pins related to the processor board. With the current hierarchy, such pinmux has to be defined in the expansion board's .dts, which is not logical. This patches reorganizes the files to add (yet another) abstraction layer between the processor and the expansion boards. omap34xx.dtsi omap3-overo-base.dtsi omap36xx.dtsi | | | | --------------- --------------- | | omap3-overo.dtsi omap3-overo-storm.dtsi | | -------- ------ | omap3-overo-tobi-common.dtsi | | | | | --------------- --------------- | | omap3-overo-tobi.dts omap3-overo-storm-tobi.dts Signed-off-by: Florian Vaussard <florian.vaussard@epfl.ch> Signed-off-by: Tony Lindgren <tony@atomide.com>
2014-03-01ARM: dts: omap3: Set disabled status for McBSP instances as default statePeter Ujfalusi1-0/+4
In omap3.dtsi disable all mcbsp nodes and board dts files can explicitly enable the mcbsp they are using. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2014-02-14ARM: dts: omap3-tobi: Fix boot with OMAP36xx-based OveroFlorian Vaussard1-3/+0
Tobi expansion board can be used with both OMAP35xx-based Overo, and OMAP36xx-based Overo. Currently the boot is broken with newer OMAP36xx-based Overo (Storm and alike). Fix include file and compatible string to be able to boot newer models. This will break older models. This will be addressed later. Signed-off-by: Florian Vaussard <florian.vaussard@epfl.ch> Tested-by: Kevin Hilman <khilman@linaro.org> Acked-by: Nishanth Menon <nm@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2013-09-28ARM: dts: omap: update usb_otg_hs dataKishon Vijay Abraham I1-0/+2
Updated the usb_otg_hs dt data to include the *phy* and *phy-names* binding in order for the driver to use the new generic PHY framework. Also updated the Documentation to include the binding information. The PHY binding information can be found at Documentation/devicetree/bindings/phy/phy-bindings.txt Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Acked-by: Felipe Balbi <balbi@ti.com> Acked-by: Tony Lindgren <tony@atomide.com> Reviewed-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-06-19ARM: dts: omap3-overo: Add default trigger for TWL4030 LEDFlorian Vaussard1-0/+1
Commit c971ff1 'leds: leds-pwm: Defer led_pwm_set() if PWM can sleep' fixed a crash when using a trigger with a pwm-led provided by an external chip. Now it is safe to add the default trigger according to board-overo.c. Signed-off-by: Florian Vaussard <florian.vaussard@epfl.ch> Signed-off-by: Benoit Cousson <benoit.cousson@linaro.org>
2013-06-19ARM: dts: TWL4030: fix mux and wakeup for SYS_NIRQ lineKevin Hilman1-0/+1
On most OMAP3 platforms, the twl4030 IRQ line is connected to the SYS_NIRQ line on OMAP. Add another DTS include file (twl4030_omap3.dtsi) for boards that hook up the twl4030 this way to include. This allows RTC wake from off-mode to work again on OMAP3-based platforms with twl4030. Tested on 3530/Beagle, 3730/Beagle-xM, 3530/Overo, 3730/Overo-STORM. Special thanks to Florian Vaussard for suggesting use of preprocessor feature. Cc: Florian Vaussard <florian.vaussard@epfl.ch> Cc: Benoit Cousson <b-cousson@ti.com> Cc: Nishanth Menon <nm@ti.com> Signed-off-by: Kevin Hilman <khilman@linaro.org> Signed-off-by: Benoit Cousson <benoit.cousson@linaro.org>
2013-06-19ARM: dts: OMAP3: beagle/overo: mux console UART, enable wakeupKevin Hilman1-0/+14
Ensure the console uart (UART3) on these boards is mux'd correctly, and IO ring wakeup is enabled. This is needed for serial console wakeups when using DT boot. Thanks to Florian Vaussard for suggestion to use preprocessor features. Cc: Florian Vaussard <florian.vaussard@epfl.ch> Signed-off-by: Kevin Hilman <khilman@linaro.org> Signed-off-by: Benoit Cousson <benoit.cousson@linaro.org>
2013-06-19ARM: dts: OMAP2+: Use #include for all device treesFlorian Vaussard1-2/+2
Replace /include/ by #include for OMAP2+ DT, in order to use the C pre-processor, making use of #define features possible. Signed-off-by: Florian Vaussard <florian.vaussard@epfl.ch> Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Reviewed-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Benoit Cousson <benoit.cousson@linaro.org>
2013-05-09ARM: dts: don't assume boards are using twl4030 for omap3Jason Cooper1-0/+1
If a board isn't using twl4030, then dtc will complain about the missing phandle (which is in twl4030.dtsi). Move the phy declaration to the dts files. Signed-off-by: Jason Cooper <jason@lakedaemon.net> Signed-off-by: Tony Lindgren <tony@atomide.com>
2013-04-09ARM: dts: OMAP34xx/35xx: Add CPU OPP tableNishanth Menon1-1/+1
Add DT OPP table for OMAP34xx/35xx family of devices. This data is decoded by OF with of_init_opp_table() helper function. OPP data here is based on existing opp3xxx_data.c Since the omap36xx OPP tables would be different from OMAP34xx/35xx, introduce an new omap34xx.dtsi for 34xx/35xx specific entries and use existing omap3.dtsi as the common dtsi file for all OMAP3 platforms. This is in preparation to use generic cpufreq-cpu0 driver for device tree enabled boot. Legacy non device tree enabled boot continues to use omap-cpufreq.c and opp3xxx_data.c. Signed-off-by: Nishanth Menon <nm@ti.com> Cc: Kevin Hilman <khilman@deeprootsystems.com> Cc: Jon Hunter <jon-hunter@ti.com> Cc: Santosh Shilimkar <santosh.shilimkar@ti.com> Cc: Shawn Guo <shawn.guo@linaro.org> Cc: Keerthy <j-keerthy@ti.com> Signed-off-by: Benoit Cousson <benoit.cousson@linaro.org>
2013-04-09ARM: dts: OMAP: Add usb_otg and glue data to OMAP3+ boardsKishon Vijay Abraham I1-0/+6
Add usb otg data node in omap4/omap3 device tree file. Also update the node with board specific setting in omapx-<board>.dts file. The dt data specifies among others the interface type (ULPI or UTMI), mode which is mostly OTG, power that specifies the amount of power this can supply when in host mode. The information about usb otg node is available @ Documentation/devicetree/bindings/usb/omap-usb.txt Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Acked-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Benoit Cousson <benoit.cousson@linaro.org>
2013-04-09ARM: dts: omap3-overo: Add audio supportFlorian Vaussard1-0/+14
Add the needed sections to enable audio support on Overo. Signed-off-by: Florian Vaussard <florian.vaussard@epfl.ch> Signed-off-by: Benoit Cousson <benoit.cousson@linaro.org>
2013-04-09ARM: dts: omap3-overo: Add support for pwm-ledsFlorian Vaussard1-4/+5
Convert the on-board LED connected to the TWL4030 (LEDB) to use pwm-leds. Signed-off-by: Florian Vaussard <florian.vaussard@epfl.ch> Signed-off-by: Benoit Cousson <benoit.cousson@linaro.org>
2012-09-10ARM: dts: omap3-overo: Add support for the blue LEDFlorian Vaussard1-0/+15
Support the blue LED connected to the LEDB pin of the TWL4030 on the Gumstix Overo. Signed-off-by: Florian Vaussard <florian.vaussard@epfl.ch> Signed-off-by: Benoit Cousson <b-cousson@ti.com>
2012-09-10ARM: dts: OMAP3: Add support for Gumstix Overo with Tobi expansion boardFlorian Vaussard1-0/+42
The Gumstix Overo is a computer on module using an OMAP3 processor. This module must be plugged into an expansion board. This patch adds a first device tree support for the Overo, using the Tobi expansion board. The current support is able to boot and mount the rootfs from MMC. This patche also updates the omap3 dtb build target. Currently working: - mmc0 (on board microSD) - i2c0 and i2c2 (i2c1 not used) - led on GPIO Signed-off-by: Florian Vaussard <florian.vaussard@epfl.ch> Signed-off-by: Benoit Cousson <b-cousson@ti.com>