summaryrefslogtreecommitdiff
path: root/arch/arm/boot/dts/r8a77470-iwg23s-sbc.dts
AgeCommit message (Collapse)AuthorFilesLines
2023-06-21ARM: dts: Move .dts files to vendor sub-directoriesRob Herring1-321/+0
The arm dts directory has grown to 1559 boards which makes it a bit unwieldy to maintain and use. Past attempts stalled out due to plans to move .dts files out of the kernel tree. Doing that is no longer planned (any time soon at least), so let's go ahead and group .dts files by vendors. This move aligns arm with arm64 .dts file structure. There's no change to dtbs_install as the flat structure is maintained on install. The naming of vendor directories is roughly in this order of preference: - Matching original and current SoC vendor prefix/name (e.g. ti, qcom) - Current vendor prefix/name if still actively sold (SoCs which have been aquired) (e.g. nxp/imx) - Existing platform name for older platforms not sold/maintained by any company (e.g. gemini, nspire) The whole move was scripted with the exception of MAINTAINERS and a few makefile fixups. Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Acked-by: Michal Simek <michal.simek@amd.com> #Xilinx Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Acked-by: Neil Armstrong <neil.armstrong@linaro.org> Acked-by: Paul Barker <paul.barker@sancloud.com> Acked-by: Tony Lindgren <tony@atomide.com> Acked-by: Gregory CLEMENT <gregory.clement@bootlin.com> Acked-by: Heiko Stuebner <heiko@sntech.de> Acked-by: Wei Xu <xuwei5@hisilicon.com> #hisilicon Acked-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Nick Hawkins <nick.hawkins@hpe.com> Acked-by: Baruch Siach <baruch@tkos.co.il> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Andre Przywara <andre.przywara@arm.com> Acked-by: Andre Przywara <andre.przywara@arm.com> Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com> Acked-by: Peter Rosin <peda@axentia.se> Acked-by: Jesper Nilsson <jesper.nilsson@axis.com> Acked-by: Sudeep Holla <sudeep.holla@arm.com> Acked-by: Florian Fainelli <f.fainelli@gmail.com> #broadcom Acked-by: Manivannan Sadhasivam <mani@kernel.org> Reviewed-by: Jisheng Zhang <jszhang@kernel.org> Acked-by: Patrice Chotard <patrice.chotard@foss.st.com> Acked-by: Romain Perier <romain.perier@gmail.com> Acked-by: Alexandre TORGUE <alexandre.torgue@st.com> Acked-by: Shawn Guo <shawnguo@kernel.org> Acked-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com> Acked-by: Enric Balletbo i Serra <eballetbo@gmail.com> Signed-off-by: Rob Herring <robh@kernel.org>
2022-02-24ARM: dts: renesas: Align GPIO hog names with dtschemaGeert Uytterhoeven1-1/+1
Dtschema expects GPIO hogs to end with a "hog" suffix. Also, the convention for node names is to use hyphens, not underscores. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/972d982024cbb04dcf29b2a0ac6beaf41e66c363.1645705927.git.geert+renesas@glider.be
2021-09-28ARM: dts: renesas: Add compatible properties to KSZ9031 Ethernet PHYsGeert Uytterhoeven1-0/+2
Add compatible values to Ethernet PHY subnodes representing Micrel KSZ9031 PHYs on RZ/G1 boards. This allows software to identify the PHY model at any time, regardless of the state of the PHY reset line. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Tested-by: Biju Das <biju.das.jz@bp.renesas.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Link: https://lore.kernel.org/r/ce8ae6b199fa244315a008ae31891a808ca1948d.1631174218.git.geert+renesas@glider.be
2019-12-20ARM: dts: renesas: Group tuples in regulator-gpio states propertiesGeert Uytterhoeven1-2/+1
To improve human readability and enable automatic validation, the tuples in the "states" properties of device nodes compatible with "regulator-gpio" should be grouped, as reported by "make dtbs_check": $ make dtbs_check DT_SCHEMA_FILES=Documentation/devicetree/bindings/regulator/gpio-regulator.yaml arch/arm/boot/dts/r8a7791-koelsch.dt.yaml: regulator-vccq-sdhi0: states:0: Additional items are not allowed (1800000, 0 were unexpected) arch/arm/boot/dts/r8a7791-koelsch.dt.yaml: regulator-vccq-sdhi0: states:0: [3300000, 1, 1800000, 0] is too long arch/arm/boot/dts/r8a7791-koelsch.dt.yaml: regulator-vccq-sdhi1: states:0: Additional items are not allowed (1800000, 0 were unexpected) arch/arm/boot/dts/r8a7791-koelsch.dt.yaml: regulator-vccq-sdhi1: states:0: [3300000, 1, 1800000, 0] is too long arch/arm/boot/dts/r8a7791-koelsch.dt.yaml: regulator-vccq-sdhi2: states:0: Additional items are not allowed (1800000, 0 were unexpected) arch/arm/boot/dts/r8a7791-koelsch.dt.yaml: regulator-vccq-sdhi2: states:0: [3300000, 1, 1800000, 0] is too long ... Fix this by grouping the tuples using angle brackets. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/20191213164115.3697-2-geert+renesas@glider.be Reviewed-by: Ulrich Hecht <uli+renesas@fpond.eu>
2019-06-21ARM: dts: iwg23s-sbc: Fix SDHI2 VccQ regulatorFabrizio Castro1-1/+1
SDR50 isn't working anymore because the GPIO regulator driver is using descriptors since commit d6cd33ad7102 ("regulator: gpio: Convert to use descriptors") which in turn causes the system to use the polarity of the GPIOs (as specified in the DT) for selecting the states, but the polarity specified in the DT is wrong. This patch fixes the regulator DT definition, and that fixes SDR50. Fixes: 9eb36b945b5c ("ARM: dts: iwg23s-sbc: Add uSD and eMMC support") Signed-off-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2019-06-21ARM: dts: renesas: Use ip=on for bootargsMagnus Damm1-1/+1
Convert bootargs from ip=dhcp to ip=on Signed-off-by: Magnus Damm <damm+renesas@opensource.se> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2019-04-12ARM: dts: iwg23s-sbc: Enable HS-USBBiju Das1-0/+4
Enable HS-USB device for the iWave SBC based on RZ/G1C. Signed-off-by: Biju Das <biju.das@bp.renesas.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2019-04-12ARM: dts: iwg23s-sbc: Enable USB USB2.0 HostBiju Das1-0/+8
Enable USB2.0 host on the iwg23s sbc. Signed-off-by: Biju Das <biju.das@bp.renesas.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2019-04-12ARM: dts: iwg23s-sbc: Enable USB Phy[01]Biju Das1-0/+32
Enable USB phy[01] on iWave iwg23s sbc based on RZ/G1C SoC. Signed-off-by: Biju Das <biju.das@bp.renesas.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2019-03-25ARM: dts: iwg23s-sbc: Add HDMI supportFabrizio Castro1-0/+79
This patch adds HDMI video output support to the iwg23s board from iWave. Due to a problem with the bootloader not dealing with the configuration of one of the pins correctly, we have to use a gpio-hog for the interrupt line to make sure the pin is configured as GPIO-input when requesting the interrupt. Signed-off-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2019-01-07ARM: dts: iwg23s-sbc: Enable RTCBiju Das1-0/+18
Enable NXP pcf85263 real time clock for the iWave SBC based on RZ/G1C. Signed-off-by: Biju Das <biju.das@bp.renesas.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2018-11-28ARM: dts: iwg23s-sbc: Add QSPI flash supportFabrizio Castro1-0/+26
This commit adds QSPI flash support to the iwg23s board specific device tree. Signed-off-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2018-11-28ARM: dts: iwg23s-sbc: Add pinctl support for EtherAVBBiju Das1-0/+8
Adding pinctrl support for EtherAVB interface. Signed-off-by: Biju Das <biju.das@bp.renesas.com> Reviewed-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2018-11-28ARM: dts: iwg23s-sbc: Enable cmt0Biju Das1-0/+4
This patch enables cmt0 support on the iWave iwg23s sbc. Signed-off-by: Biju Das <biju.das@bp.renesas.com> Reviewed-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2018-11-28ARM: dts: iwg23s-sbc: Enable watchdog supportBiju Das1-0/+5
This patch enables watchdog support on the iWave iwg23s sbc. Signed-off-by: Biju Das <biju.das@bp.renesas.com> Reviewed-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2018-11-28ARM: dts: iwg23s-sbc: Add uSD and eMMC supportFabrizio Castro1-0/+76
Add uSD card and eMMC support to the iwg23s single board computer powered by the RZ/G1C SoC (a.k.a. r8a77470). Signed-off-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com> Reviewed-by: Biju Das <biju.das@bp.renesas.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2018-08-27ARM: dts: iwg23s-sbc: specify EtherAVB PHY IRQBiju Das1-0/+2
Specify EtherAVB PHY IRQ in the board specific device tree, now that we have GPIO support. Signed-off-by: Biju Das <biju.das@bp.renesas.com> Reviewed-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2018-08-27ARM: dts: iwg23s-sbc: Add pinctl support for scif1Biju Das1-0/+10
Adding pinctrl support for scif1 interface. Signed-off-by: Biju Das <biju.das@bp.renesas.com> Reviewed-by: Chris Paterson <chris.paterson2@renesas.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2018-04-30ARM: dts: iwg23s-sbc: Add EtherAVB supportBiju Das1-1/+14
Define the iW-RainboW-G23S board dependent part of the EtherAVB device node. Signed-off-by: Biju Das <biju.das@bp.renesas.com> Reviewed-by: Chris Paterson <chris.paterson2@renesas.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2018-04-16ARM: dts: iwg23s-sbc: Add support for iWave G23S-SBC based on RZ/G1CBiju Das1-0/+35
Add support for iWave iW-RainboW-G23S single board computer based on RZ/G1C. Signed-off-by: Biju Das <biju.das@bp.renesas.com> Reviewed-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
generated by cgit v1.2.3 (git 2.39.0) at 2024-09-15 02:31:10 +0300