summaryrefslogtreecommitdiff
path: root/arch/arm/boot/dts
AgeCommit message (Collapse)AuthorFilesLines
2013-01-29ARM: dts: fix tick and alarm irq numbers for exynos5440Giridhar Maruthy1-1/+1
The interrupts for RTC tick and alarm interrupt were swapped. Has been fixed here. Signed-off-by: Giridhar Maruthy <giridhar.m@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2013-01-29ARM: dts: fix compatible value for exynos pinctrlKukjin Kim2-7/+7
Fix the incorrect compatible property value of pinctrl for EXYNOS4 SoCs. Cc: Thomas Abraham <thomas.ab@samsung.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Cc: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2013-01-29ARM: dts: Fix compatible value of pinctrl module on EXYNOS5440Thomas Abraham1-1/+1
Fix the incorrect compatible property value of pin-controller module EXYNOS5440 SoC. Signed-off-by: Thomas Abraham <thomas.ab@samsung.com> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Grant Likely <grant.likely@secretlab.ca> [kgene.kim@samsung.com: fixed it in gpio together for exynos5440] Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2013-01-24Merge branch 'vexpress/fixes' of git://git.linaro.org/people/pawelmoll/linux ↵Olof Johansson1-2/+0
into fixes From Pawel Moll: - makes the V2P-CA15_A7 (a.k.a. TC2) work with 3.8 kernels - improves vexpress-sysreg.c behaviour on arm64 platforms * 'vexpress/fixes' of git://git.linaro.org/people/pawelmoll/linux: mfd: vexpress-sysreg: Don't skip initialization on probe ARM: vexpress: Enable A7 cores in V2P-CA15_A7's Device Tree ARM: vexpress: extend the MPIDR range used for pen release check
2013-01-24Merge tag 'at91-fixes' of git://github.com/at91linux/linux-at91 into fixesOlof Johansson3-22/+44
From Nicolas Ferre: Here are fixes for AT91 that are mainly related to device tree. One RM9200 setup option is the only C code change. Some documentation changes can clarify the pinctrl use. Then, some defconfig modifications are allowing the affected platforms to boot. * tag 'at91-fixes' of git://github.com/at91linux/linux-at91: ARM: at91/dts: correct comment in at91sam9x5.dtsi for mii ARM: at91/at91_dt_defconfig: add at91sam9n12 SoC to DT defconfig ARM: at91/at91_dt_defconfig: remove memory specification to cmdline ARM: at91/dts: add macb mii pinctrl config for kizbox ARM: at91: rm9200: remake the BGA as default version ARM: at91: fix gpios on i2c-gpio for RM9200 DT ARM: at91/at91sam9x5 DTS: add SCK USART pins ARM: at91/at91sam9x5 DTS: correct wrong PIO BANK values on u(s)arts ARM: at91/at91-pinctrl documentation: fix typo and add some details
2013-01-24ARM: vexpress: Enable A7 cores in V2P-CA15_A7's Device TreePawel Moll1-2/+0
As the kernel is able to cope with multiple clusters, uncomment the A7 cores in the Device Tree for V2P-CA15_A7 tile, making all 5 cores available to the user. Signed-off-by: Pawel Moll <pawel.moll@arm.com>
2013-01-24Merge tag 'mvebu_fixes_for_v3.8-rc5' of ↵Olof Johansson1-0/+2
git://git.infradead.org/users/jcooper/linux into fixes From Jason Cooper: mvebu fixes for v3.8-rc5 - fix memory leak in mvebu/clk-cpu.c - use devm_ to correct/simplify error paths in mvsdio - add missing #interrupt-cells property in kirkwood * tag 'mvebu_fixes_for_v3.8-rc5' of git://git.infradead.org/users/jcooper/linux: ARM: kirkwood: fix missing #interrupt-cells property mmc: mvsdio: use devm_ API to simplify/correct error paths. clk: mvebu/clk-cpu.c: fix memory leakage
2013-01-23ARM: at91/dts: correct comment in at91sam9x5.dtsi for miiDouglas Gilbert1-8/+8
Concerning pinctrl_macb0_rmii_mii, values were okay, but not comments. Signed-off-by: Douglas Gilbert <dgilbert@interlog.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2013-01-23ARM: at91/dts: add macb mii pinctrl config for kizboxBoris BREZILLON1-0/+2
This patch overrides default macb pinctrl config defined in at91sam9260.dtsi (pinctrl_macb_rmii) with kizbox board config (pinctrl_macb_rmii + pinctrl_macb_rmii_mii_alt). Signed-off-by: Boris BREZILLON <linux-arm@overkiz.com> Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2013-01-23ARM: at91: fix gpios on i2c-gpio for RM9200 DTJoachim Eastwood1-2/+2
Signed-off-by: Joachim Eastwood <manabian@gmail.com> Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2013-01-23ARM: at91/at91sam9x5 DTS: add SCK USART pinsRichard Genoud1-0/+20
The SCK pins where missing in usarts pinctrl. Signed-off-by: Richard Genoud <richard.genoud@gmail.com> Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2013-01-23ARM: at91/at91sam9x5 DTS: correct wrong PIO BANK values on u(s)artsRichard Genoud1-12/+12
The PIN_BANK 3 is for PDxx pins, not PCxx pins. And PIN_BANK 1 is for PBxx, not PIN_BANK 0. Signed-off-by: Richard Genoud <richard.genoud@gmail.com> Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2013-01-23ARM: kirkwood: fix missing #interrupt-cells propertySebastian Hesselbarth1-0/+2
The gpio controller on kirkwood can provide interrupts but is missing the #interrupt-cells property. This patch just adds it to both gpio controllers. Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2013-01-22Merge tag 'omap-for-v3.8-rc4/fixes-signed' of ↵Olof Johansson6-7/+142
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into fixes From Tony Lindgren: Minimal omap fixes for the -rc series: - A build fix for recently merged omap DRM changes - Regression fixes from the common clock framework conversion for omap4 audio and omap2 reboot - Regression fix for pandaboard WLAN control UART muxing caused by u-boot only muxing essential pins nowadays - Timer iteration fix for CONFIG_OF_DYNAMIC - A section mismatch fix for ocp2scp init * tag 'omap-for-v3.8-rc4/fixes-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: (306 commits) ARM: OMAP2+: omap4-panda: add UART2 muxing for WiLink shared transport ARM: OMAP2+: DT node Timer iteration fix ARM: OMAP2+: Fix section warning for omap_init_ocp2scp() ARM: OMAP2+: fix build break for omapdrm ARM: OMAP2: Fix missing omap2xxx_clkt_vps_late_init function calls ARM: OMAP4: hwmod_data: Correct IDLEMODE for McPDM ARM: OMAP4: clock data: Lock ABE DPLL on all revisions + Linux 3.8-rc4 Signed-off-by: Olof Johansson <olof@lixom.net>
2013-01-17Merge branch 'v3.8-samsung-fixes-3' of ↵Olof Johansson3-11/+13
git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung into fixes From Kukjin Kim: That branch fixes build error for S3C24XX/S3C64xx. And corrects dw-mshc properties on EXYNOS5 DT and fixes IRQ mapping on Cragganmore board. * 'v3.8-samsung-fixes-3' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung: ARM: S3C64XX: Fix up IRQ mapping for balblair on Cragganmore ARM: dts: correct the dw-mshc timing properties as per binding ARM: S3C64XX: Fix build error with CONFIG_S3C_DEV_FB disabled + Linux 3.8-rc3 Signed-off-by: Olof Johansson <olof@lixom.net>
2013-01-17ARM: dts: correct the dw-mshc timing properties as per bindingAlim Akhtar2-10/+10
As per the current exynos-dw-mshc bindings, dw-mshc-sdr-timing and dw-mshc-ddr-timing properties are having only two cells, these properties are wrongly set for exynos5250 based cros5250 and smdk5250 platfroms. This patch corrects above timing propreties for above platfroms Signed-off-by: Alim Akhtar <alim.akhtar@samsung.com> Tested-by: Doug Anderson <dianders@chromium.org> Acked-by: Doug Anderson <dianders@chromium.org> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2013-01-17Merge tag 'sunxi-fixes-for-3.8-rc4' of git://github.com/mripard/linux into fixesOlof Johansson1-2/+4
From Maxime Ripard: Sunxi dt fixes for 3.8-rc's * tag 'sunxi-fixes-for-3.8-rc4' of git://github.com/mripard/linux: ARM: sunxi: Use the Synosys APB UART instead of ns8250
2013-01-16Merge tag 'sound-3.8' of ↵Linus Torvalds5-7/+141
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound Pull second round of sound fixes from Takashi Iwai: "Yet a few more fixes popped up in this week. The biggest change here is the addition of pinctrl support for Atmel, which turned out to be almost mandatory to make things working. The rest are a few fixes for M-Audio usb-audio device and a fix for regression of HD-audio HDMI codecs with alsactl in the recent kernel." * tag 'sound-3.8' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: ALSA: hda/hdmi - Work around "alsactl restore" errors ALSA: usb-audio: selector map for M-Audio FT C400 ALSA: usb-audio: M-Audio FT C400 skip packet quirk ALSA: usb-audio: correct M-Audio C400 clock source quirk ALSA: usb - fix race in creation of M-Audio Fast track pro driver ASoC: atmel-ssc: add pinctrl selection to driver ARM: at91/dts: add pinctrl support for SSC peripheral
2013-01-16ARM: sunxi: Use the Synosys APB UART instead of ns8250Maxime Ripard1-2/+4
The UART controller used in the A10/A13 is the Synopsys DesignWare 8250. The wrong use of a regular 8250 driver may lead to a oops during kernel boot with "irq 17: nobody cared", because the apb UART as an extra interrupt that gets raised when writing to the LCR when busy. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2013-01-14ARM: dts: prevent *.dtb from always being rebuiltStephen Warren1-0/+1
if_changed (used by the *.dts->*.dtc rule) rebuilds files if they aren't contained in $(targets). (make V=2 indicates this). Add $(dtb-y) to $(targets) to prevent *.dtb from always being rebuilt. This fixes a regression introduced by the .dtb rule rework in 499cd82 "ARM: dt: change .dtb build rules to build in dts directory". Reported-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Rob Herring <rob.herring@calxeda.com>
2013-01-12ARM: at91/dts: add pinctrl support for SSC peripheralBo Shen5-7/+141
Add pinctrl support for SSC on AT91 dtsi files. Signed-off-by: Bo Shen <voice.shen@atmel.com> [nicolas.ferre@atmel.com: split dtsi and driver changes] Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Reluctantly-acked-by: Olof Johansson <olof@lixom.net> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-01-11Merge tag 'mvebu_fixes_for_v3.8-rc3' of ↵Olof Johansson6-35/+53
git://git.infradead.org/users/jcooper/linux into fixes From Jason Cooper: mvebu fixes for v3.8-rc3 - gpio fixes in mvebu, kirkwood, and dove - small DT fix for mvebu (correct RAM size) * tag 'mvebu_fixes_for_v3.8-rc3' of git://git.infradead.org/users/jcooper/linux: arm: mvebu: Fix memory size for Armada 370 DB ARM: Dove: add Cubox sdhci card detect gpio ARM: Kirkwood: fix ns2 gpios by converting to pinctrl arm: mvebu: use global interrupts for GPIOs on Armada XP
2013-01-10arm: mvebu: Fix memory size for Armada 370 DBGregory CLEMENT1-1/+1
Actually the Armada 370 DB (aka DB-88F6710-BP-DDR3) come with 1GB and not 512MB. Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2013-01-10ARM: Dove: add Cubox sdhci card detect gpioSebastian Hesselbarth1-2/+12
Card detect for sdhci on Cubox is connected to the wrong pin (sdio1_cd instead of sdio0_cd). With support for cd-gpios and pinctrl add the corresponding properties to DT for Cubox. Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2013-01-10ARM: Kirkwood: fix ns2 gpios by converting to pinctrlSimon Guinot1-0/+16
Note that the pinctrl conversion also fixes GPIO support for ns2 boards. Since commit f9e75922: "ARM: Kirkwood: Make use of mvebu pincltl and gpio", the mvbu_gpio driver is used for DT boards. As mvbu_gpio relies on the pinctrl driver, then a pinctrl definition must be given to allow the GPIO configuration. Signed-off-by: Simon Guinot <simon.guinot@sequanux.org> Acked-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2013-01-09Merge tag 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-socLinus Torvalds17-30/+77
Pull ARM SoC fixes from Olof Johansson: "People are back from the holiday breaks, and it shows. Here are a bunch of fixes for a number of platforms: - A couple of small fixes for Nomadik - A larger set of changes for kirkwood/mvebu - uart driver selection, dt clocks, gpio-poweroff fixups, a few __init annotation fixes and some error handling improvement in their xor dma driver. - i.MX had a couple of minor fixes (and a critical one for flexcan2 clock setup) - MXS has a small board fix and a framebuffer bugfix - A set of fixes for Samsung Exynos, fixing default bootargs and some Exynos5440 clock issues - A set of OMAP changes including PM fixes and a few sparse warning fixups All in all a bit more positive code delta than we'd ideally want to see here, mostly from the OMAP PM changes, but nothing overly crazy." * tag 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (44 commits) ARM: clps711x: Fix bad merge of clockevents setup ARM: highbank: save and restore L2 cache and GIC on suspend ARM: highbank: add a power request clear ARM: highbank: fix secondary boot and hotplug ARM: highbank: fix typos with hignbank in power request functions ARM: dts: fix highbank cpu mpidr values ARM: dts: add device_type prop to cpu nodes on Calxeda platforms ARM: mx5: Fix MX53 flexcan2 clock ARM: OMAP2+: am33xx-hwmod: Fix wrongly terminated am33xx_usbss_mpu_irqs array pinctrl: mvebu: make pdma clock on dove mandatory ARM: Dove: Add pinctrl clock to DT dma: mv_xor: fix error handling for clocks dma: mv_xor: fix error handling of mv_xor_channel_add() arm: mvebu: Add missing ; for cpu node. arm: mvebu: Armada XP MV78230 has only three Ethernet interfaces arm: mvebu: Armada XP MV78230 has two cores, not one clk: mvebu: Remove inappropriate __init tagging ARM: Kirkwood: Use fixed-regulator instead of board gpio call ARM: Kirkwood: Fix missing sdio clock ARM: Kirkwood: Switch TWSI1 of 88f6282 to DT clock providers ...
2013-01-08Merge branch 'v3.8-samsung-fixes-2' of ↵Olof Johansson3-3/+3
git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung into fixes From Kukjin Kim: Most of them are EXYNOS5440 fixes which are for changing uart console, cpu id (typo) and silent complaining gpio error in kernel boot. * 'v3.8-samsung-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung: ARM: EXYNOS: skip the clock initialization for exynos5440 ARM: EXYNOS: enable PINCTRL for EXYNOS5440 ARM: dts: use uart port1 for console on exynos4210-smdkv310 ARM: dts: use uart port0 for console on exynos5440-ssdk5440 ARM: SAMSUNG: fix the cpu id for EXYNOS5440 ARM: EXYNOS: Revise HDMI resource size
2013-01-08Merge tag 'mxs-fixes-3.8' of git://git.linaro.org/people/shawnguo/linux-2.6 ↵Olof Johansson1-4/+4
into fixes From Shawn Guo: I have to send one critical mxsfb fix through arm-soc, as FB maintainer is unresponsive for quite a while. People start complaining the missing of such an important fix. * tag 'mxs-fixes-3.8' of git://git.linaro.org/people/shawnguo/linux-2.6: video: mxsfb: fix crash when unblanking the display ARM: dts: imx23-olinuxino: Fix IOMUX settings
2013-01-08Merge tag 'imx-fixes-3.8' of git://git.linaro.org/people/shawnguo/linux-2.6 ↵Olof Johansson2-2/+2
into fixes From Shawn Guo: It includes one critical fix - wrong flexcan2 clock will hang system when the port gets brought up. The other two are non-critical fixes, which are sent together here, since it's still early -rc stage. * tag 'imx-fixes-3.8' of git://git.linaro.org/people/shawnguo/linux-2.6: ARM: mx5: Fix MX53 flexcan2 clock ARM: dts: imx31-bug: Fix manufacturer compatible string clk: imx: Remove 'clock-output-names' from the examples
2013-01-08arm: mvebu: use global interrupts for GPIOs on Armada XPThomas Petazzoni3-32/+24
The Armada XP GPIO controller has two ways of notifying interrupts: using global interrupts or using per-CPU interrupts. In an attempt to use the best available features, the 'marvell,armadaxp-gpio' compatible string selects a variant of the gpio-mvebu driver that makes use of the per-CPU interrupts. Unfortunately, this doesn't work properly in a SMP context, because we fall into cases where the GPIO interrupt is enabled on CPU X at the GPIO controller level, but on CPU Y at the interrupt controller level. It is not yet clear how to fix that easily. So for 3.8, our approach is to switch to global interrupts for GPIOs, so that we do not fall into this per-CPU interrupts problem. This patch therefore fixes GPIO interrupts on Armada XP platforms. Without this patch, GPIO interrupts simply do not work reliably, because their proper operation depends on which CPU the code requesting the interrupt is running. Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2013-01-08Merge tag 'mvebu_fixes_for_v3.8' of ↵Olof Johansson9-13/+52
git://git.infradead.org/users/jcooper/linux into fixes From Jason Cooper: fixes for mvebu/kirkwood v3.8 - use correct uart driver for mvebu boards - add a missing DT clocks - gpio-poweroff level vs. edge triggering, use gpio_is_valid() - remove an inappropriate __init, modules need to access function. - various DT fixes - error handling in mv_xor * tag 'mvebu_fixes_for_v3.8' of git://git.infradead.org/users/jcooper/linux: pinctrl: mvebu: make pdma clock on dove mandatory ARM: Dove: Add pinctrl clock to DT dma: mv_xor: fix error handling for clocks dma: mv_xor: fix error handling of mv_xor_channel_add() arm: mvebu: Add missing ; for cpu node. arm: mvebu: Armada XP MV78230 has only three Ethernet interfaces arm: mvebu: Armada XP MV78230 has two cores, not one clk: mvebu: Remove inappropriate __init tagging ARM: Kirkwood: Use fixed-regulator instead of board gpio call ARM: Kirkwood: Fix missing sdio clock ARM: Kirkwood: Switch TWSI1 of 88f6282 to DT clock providers Power: gpio-poweroff: Fix documentation and gpio_is_valid ARM: Kirkwood: Fix missing clk for USB device. arm: mvebu: Use dw-apb-uart instead of ns16650 as UART driver Signed-off-by: Olof Johansson <olof@lixom.net>
2013-01-08ARM: dts: fix highbank cpu mpidr valuesRob Herring1-8/+8
With the addition of commit a0ae0240 (ARM: kernel: add device tree init map function), the cpu reg values must match the cpu mpidr register or we'll get warnings. For some reason, the CLUSTERID on highbank is 9, so the reg value needs to be 0x90n to quiet the warnings. Signed-off-by: Rob Herring <rob.herring@calxeda.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2013-01-08ARM: dts: add device_type prop to cpu nodes on Calxeda platformsRob Herring2-0/+8
While device_type is considered deprecated, it is still needed for tools like lshw to identify cpu nodes. Signed-off-by: Rob Herring <rob.herring@calxeda.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2013-01-08ARM: mx5: Fix MX53 flexcan2 clockMarek Vasut1-1/+1
The second FlexCAN port uses different clock than the first one, configure correct clock to prevent hanging of the system during bringing up of the port. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@freescale.com> Acked-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-01-07ARM: Dove: Add pinctrl clock to DTSebastian Hesselbarth1-0/+1
During merge of the mvebu patches a clock gate for pinctrl was lost. This patch just readds the clock gate. Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2013-01-06arm: mvebu: Add missing ; for cpu node.Andrew Lunn1-1/+1
The Armada XP MV78230 DT include file is missing a ; at the end of the cpu node. Reported-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2013-01-06arm: mvebu: Armada XP MV78230 has only three Ethernet interfacesThomas Petazzoni3-8/+16
We originally thought that the MV78230 variant of the Armada XP had four Ethernet interfaces, like the other variants MV78260 and MV78460. In fact, this is not true, and the MV78230 has only three Ethernet interfaces. So, the definitions of the Ethernet interfaces is now done as follows: * armada-370-xp.dtsi: definitions of the first two interfaces, that are common to Armada 370 and Armada XP * armada-xp.dtsi: definition of the third interface, common to all Armada XP variants. * armada-xp-mv78260.dtsi and armada-xp-mv78460.dtsi: definition of the fourth interface. Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2013-01-06arm: mvebu: Armada XP MV78230 has two cores, not oneThomas Petazzoni1-0/+7
Contrary to our understanding at the time armada-xp-mv78230.dtsi was written, the MV78230 variant of the Armada XP SoC has two cores and not one. This patch updates the .dtsi file to take into account this reality. Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2013-01-06ARM: Kirkwood: Use fixed-regulator instead of board gpio callAndrew Lunn1-0/+17
With the change to a DT based pinctrl/gpio driver, using gpio API calls in board-*.c files no longer works, a dereferenced NULL pointer exception occurs instead. By converting the GPIO code into a fixed-regulator which gets probed later once pinctrl/gpio is available, we avoid the exception. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Tested-by: Stefan Peter <s.peter@mplch> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2013-01-06ARM: Kirkwood: Switch TWSI1 of 88f6282 to DT clock providersNobuhiro Iwamatsu1-0/+1
Clock Management of kirkwood has moved to DT clock providers. However, TWSI1 has not yet been done. This switches TWSI1 of 88f6282 to DT clock providers. Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2013-01-06ARM: Kirkwood: Fix missing clk for USB device.Andrew Lunn1-0/+1
Without the clock being held by a driver, it gets turned off at a bad time causing the SoC to lockup. This is often during reboot. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Tested-by: Stefan Peter <s.peter@mpl.ch> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2013-01-06arm: mvebu: Use dw-apb-uart instead of ns16650 as UART driverGregory CLEMENT2-4/+8
The UART controller used in the Armada 370 and Armada XP SoCs is the Synopsys DesignWare 8250 (aka Synopsys DesignWare ABP UART). The improper use of the ns16550 can lead to a kernel oops during boot if a character is sent to the UART before the initialization of the driver. The DW APB has an extra interrupt that gets raised when writing to the LCR when busy. This explains why we need to use dw-apb-uart driver to handle this. Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2013-01-04ARM: dts: imx31-bug: Fix manufacturer compatible stringFabio Estevam1-1/+1
In the compatible field we should point the manufacturer of the board, which in this case is Buglabs. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-01-04Merge tag 'pinctrl-fixes' of ↵Linus Torvalds1-1/+3
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl Pull pinctrl fixes from Linus Walleij: "A first round of pinctrl fixes for v3.8: - i.MX5 register configuration - Swap a kfree to devm_kfree() to avoid memory corruption in the at91 driver - Add the missing device tree binding doc for the SIRF pin controller - Enable the SIRF GPIO pull up/down configuration from the device tree, it was previously retired from the hard-coded approach. - NULL check for the prcm_base in the Nomadik pin controller. - Provide the prcm_base from the device tree in the DT boot path for the Nomadik pin controller." * tag 'pinctrl-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: ARM: ux500: add pinctrl address resources pinctrl: nomadik: return if prcm_base is NULL pinctrl: sirf: enable GPIO pullup/down configuration from dts pinctrl: sirf: add missing DT-binding document pinctrl: fix comment mistake drivers/pinctrl/pinctrl-at91.c: convert kfree to devm_kfree pinctrl: imx5: fix GPIO_8 pad CAN1_RXCAN configuration
2013-01-02watchdog: twl4030_wdt: add DT supportAaro Koskinen1-0/+4
Add DT support for twl4030_wdt. This is needed to get twl4030_wdt to probe when booting with DT. Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2012-12-28ARM: dts: use uart port1 for console on exynos4210-smdkv310Kukjin Kim1-1/+1
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2012-12-28ARM: dts: use uart port0 for console on exynos5440-ssdk5440Kukjin Kim1-1/+1
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2012-12-27ARM: EXYNOS: Revise HDMI resource sizeSean Paul1-1/+1
Reduce the HDMI resource size from 0x100000 to 0x70000 so it doesn't overlap the Displayport resource space. HDMI: (0x14530000 - 0x145A0000) DP: (0x145B0000 - 0x145B1000) Signed-off-by: Sean Paul <seanpaul@chromium.org> Signed-off-by: Prathyush K <prathyush.k@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2012-12-26ARM: ux500: add pinctrl address resourcesFabio Baltieri1-1/+3
Current nmk_pinctrl driver is not PRCMU dependent anymore, so it needs its own DT address resources to work properly, as done for platform_device in: f482833 ARM: ux500: add PRCM register base for pinctrl Signed-off-by: Fabio Baltieri <fabio.baltieri@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-12-25ARM: dts: imx23-olinuxino: Fix IOMUX settingsFabio Estevam1-4/+4
On the imx23-olinuxino board GPIO2_1 is connected to the LED and GPIO0_17 is the USB PHY reset. So make the IOMUX assignment properly. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
generated by cgit v1.2.3 (git 2.39.0) at 2024-09-21 05:54:06 +0300