summaryrefslogtreecommitdiff
path: root/arch/arm/boot
AgeCommit message (Collapse)AuthorFilesLines
2021-04-29Merge tag 'net-next-5.13' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - bpf: - allow bpf programs calling kernel functions (initially to reuse TCP congestion control implementations) - enable task local storage for tracing programs - remove the need to store per-task state in hash maps, and allow tracing programs access to task local storage previously added for BPF_LSM - add bpf_for_each_map_elem() helper, allowing programs to walk all map elements in a more robust and easier to verify fashion - sockmap: support UDP and cross-protocol BPF_SK_SKB_VERDICT redirection - lpm: add support for batched ops in LPM trie - add BTF_KIND_FLOAT support - mostly to allow use of BTF on s390 which has floats in its headers files - improve BPF syscall documentation and extend the use of kdoc parsing scripts we already employ for bpf-helpers - libbpf, bpftool: support static linking of BPF ELF files - improve support for encapsulation of L2 packets - xdp: restructure redirect actions to avoid a runtime lookup, improving performance by 4-8% in microbenchmarks - xsk: build skb by page (aka generic zerocopy xmit) - improve performance of software AF_XDP path by 33% for devices which don't need headers in the linear skb part (e.g. virtio) - nexthop: resilient next-hop groups - improve path stability on next-hops group changes (incl. offload for mlxsw) - ipv6: segment routing: add support for IPv4 decapsulation - icmp: add support for RFC 8335 extended PROBE messages - inet: use bigger hash table for IP ID generation - tcp: deal better with delayed TX completions - make sure we don't give up on fast TCP retransmissions only because driver is slow in reporting that it completed transmitting the original - tcp: reorder tcp_congestion_ops for better cache locality - mptcp: - add sockopt support for common TCP options - add support for common TCP msg flags - include multiple address ids in RM_ADDR - add reset option support for resetting one subflow - udp: GRO L4 improvements - improve 'forward' / 'frag_list' co-existence with UDP tunnel GRO, allowing the first to take place correctly even for encapsulated UDP traffic - micro-optimize dev_gro_receive() and flow dissection, avoid retpoline overhead on VLAN and TEB GRO - use less memory for sysctls, add a new sysctl type, to allow using u8 instead of "int" and "long" and shrink networking sysctls - veth: allow GRO without XDP - this allows aggregating UDP packets before handing them off to routing, bridge, OvS, etc. - allow specifing ifindex when device is moved to another namespace - netfilter: - nft_socket: add support for cgroupsv2 - nftables: add catch-all set element - special element used to define a default action in case normal lookup missed - use net_generic infra in many modules to avoid allocating per-ns memory unnecessarily - xps: improve the xps handling to avoid potential out-of-bound accesses and use-after-free when XPS change race with other re-configuration under traffic - add a config knob to turn off per-cpu netdev refcnt to catch underflows in testing Device APIs: - add WWAN subsystem to organize the WWAN interfaces better and hopefully start driving towards more unified and vendor- independent APIs - ethtool: - add interface for reading IEEE MIB stats (incl. mlx5 and bnxt support) - allow network drivers to dump arbitrary SFP EEPROM data, current offset+length API was a poor fit for modern SFP which define EEPROM in terms of pages (incl. mlx5 support) - act_police, flow_offload: add support for packet-per-second policing (incl. offload for nfp) - psample: add additional metadata attributes like transit delay for packets sampled from switch HW (and corresponding egress and policy-based sampling in the mlxsw driver) - dsa: improve support for sandwiched LAGs with bridge and DSA - netfilter: - flowtable: use direct xmit in topologies with IP forwarding, bridging, vlans etc. - nftables: counter hardware offload support - Bluetooth: - improvements for firmware download w/ Intel devices - add support for reading AOSP vendor capabilities - add support for virtio transport driver - mac80211: - allow concurrent monitor iface and ethernet rx decap - set priority and queue mapping for injected frames - phy: add support for Clause-45 PHY Loopback - pci/iov: add sysfs MSI-X vector assignment interface to distribute MSI-X resources to VFs (incl. mlx5 support) New hardware/drivers: - dsa: mv88e6xxx: add support for Marvell mv88e6393x - 11-port Ethernet switch with 8x 1-Gigabit Ethernet and 3x 10-Gigabit interfaces. - dsa: support for legacy Broadcom tags used on BCM5325, BCM5365 and BCM63xx switches - Microchip KSZ8863 and KSZ8873; 3x 10/100Mbps Ethernet switches - ath11k: support for QCN9074 a 802.11ax device - Bluetooth: Broadcom BCM4330 and BMC4334 - phy: Marvell 88X2222 transceiver support - mdio: add BCM6368 MDIO mux bus controller - r8152: support RTL8153 and RTL8156 (USB Ethernet) chips - mana: driver for Microsoft Azure Network Adapter (MANA) - Actions Semi Owl Ethernet MAC - can: driver for ETAS ES58X CAN/USB interfaces Pure driver changes: - add XDP support to: enetc, igc, stmmac - add AF_XDP support to: stmmac - virtio: - page_to_skb() use build_skb when there's sufficient tailroom (21% improvement for 1000B UDP frames) - support XDP even without dedicated Tx queues - share the Tx queues with the stack when necessary - mlx5: - flow rules: add support for mirroring with conntrack, matching on ICMP, GTP, flex filters and more - support packet sampling with flow offloads - persist uplink representor netdev across eswitch mode changes - allow coexistence of CQE compression and HW time-stamping - add ethtool extended link error state reporting - ice, iavf: support flow filters, UDP Segmentation Offload - dpaa2-switch: - move the driver out of staging - add spanning tree (STP) support - add rx copybreak support - add tc flower hardware offload on ingress traffic - ionic: - implement Rx page reuse - support HW PTP time-stamping - octeon: support TC hardware offloads - flower matching on ingress and egress ratelimitting. - stmmac: - add RX frame steering based on VLAN priority in tc flower - support frame preemption (FPE) - intel: add cross time-stamping freq difference adjustment - ocelot: - support forwarding of MRP frames in HW - support multiple bridges - support PTP Sync one-step timestamping - dsa: mv88e6xxx, dpaa2-switch: offload bridge port flags like learning, flooding etc. - ipa: add IPA v4.5, v4.9 and v4.11 support (Qualcomm SDX55, SM8350, SC7280 SoCs) - mt7601u: enable TDLS support - mt76: - add support for 802.3 rx frames (mt7915/mt7615) - mt7915 flash pre-calibration support - mt7921/mt7663 runtime power management fixes" * tag 'net-next-5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2451 commits) net: selftest: fix build issue if INET is disabled net: netrom: nr_in: Remove redundant assignment to ns net: tun: Remove redundant assignment to ret net: phy: marvell: add downshift support for M88E1240 net: dsa: ksz: Make reg_mib_cnt a u8 as it never exceeds 255 net/sched: act_ct: Remove redundant ct get and check icmp: standardize naming of RFC 8335 PROBE constants bpf, selftests: Update array map tests for per-cpu batched ops bpf: Add batched ops support for percpu array bpf: Implement formatted output helpers with bstr_printf seq_file: Add a seq_bprintf function sfc: adjust efx->xdp_tx_queue_count with the real number of initialized queues net:nfc:digital: Fix a double free in digital_tg_recv_dep_req net: fix a concurrency bug in l2tp_tunnel_register() net/smc: Remove redundant assignment to rc mpls: Remove redundant assignment to err llc2: Remove redundant assignment to rc net/tls: Remove redundant initialization of record rds: Remove redundant assignment to nr_sig dt-bindings: net: mdio-gpio: add compatible for microchip,mdio-smi0 ...
2021-04-26Merge tag 'arm-newsoc-5.13' of ↵Linus Torvalds4-1/+119
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull ARM Nuvoton WPCM450 platform support from Arnd Bergmann: "The Nuvoton WPCM450 BMC is an older chip based on the ARM926 CPU core that remains in use on Supermicro X9 server boards among others. Support gets added for a particular server board using this SoC along with the basic platform bringup. As the platform is a predecessor to the npcm7xx platform we already support, it is added to the same directory, despite using a different name. It also seems to be related to the older w90x900/nuc9xx platform that was removed last year" * tag 'arm-newsoc-5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: ARM: config: Add WPCM to multi v5 MAINTAINERS: Add entry for Nuvoton WPCM450 ARM: dts: Add devicetree for Supermicro X9SCi-LN4F based on WPCM450 ARM: dts: Add devicetree for Nuvoton WPCM450 BMC chip watchdog: npcm: Add support for WPCM450 ARM: npcm: Introduce Nuvoton WPCM450 SoC dt-bindings: watchdog: npcm: Add nuvoton,wpcm450-wdt dt-bindings: arm: npcm: Add nuvoton,wpcm450 compatible string dt-bindings: vendor-prefixes: Add Supermicro ARM: dts: Add board-specific compatible string to npcm750-evb devicetree dt-bindings: arm: Convert nuvoton,npcm750 binding to YAML
2021-04-26Merge tag 'arm-dt-5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/socLinus Torvalds218-1487/+8704
Pull ARM devicetree updates from Arnd Bergmann: "There are six new SoCs added this time. Apple M1 and Nuvoton WPCM450 have separate branches because they are new SoC families that require changes outside of device tree files. The other four are variations of already supported chips and get merged through this branch: - STMicroelectronics STM32H750 is one of many variants of STM32 microcontrollers based on the Cortex-M7 core. This is particularly notable since we rarely add support for new MMU-less chips these days. In this case, the board that gets added along with the platform is not a SoC reference platform but the "Art Pi" (https://art-pi.gitee.io/website/) machine that was originally design for the RT-Thread RTOS. - NXP i.MX8QuadMax is a variant of the growing i.MX8 embedded/industrial SoC family, using two Cortex-A72 and four Cortex-A53 cores. It gets added along with its reference board, the "NXP i.MX8QuadMax Multisensory Enablement Kit". - Qualcomm SC7280 is a Laptop SoC following the SC7180 (Snapdragon 7c) that is used in some Chromebooks and Windows laptops. Only a reference board is added for the moment. - TI AM64x Sita4ra is a new version of the K3 SoC family for industrial control, motor control, remote IO, IoT gateway etc., similar to the older AM65x family. Two reference machines are added alongside. Among the newly added machines, there is a very clear skew towards 64-bit machines now, with 12 32-bit machines compared to 23 64-bit machines. The full list sorted by SoC is: - ASpeed AST2500 BMC: ASRock E3C246D4I Xeon server board - Allwinner A10: Topwise A721 Tablet - Amlogic GXL: MeCool KII TV box - Amlogic GXM: Mecool KIII, Minix Neo U9-H TV boxes - Broadcom BCM4908: TP-Link Archer C2300 V1 router - MStar SSD202D: M5Stack UnitV2 camera - Marvell Armada 38x: ATL-x530 ethernet switch - Mediatek MT8183 Chromebooks: Lenovo 10e, Acer Spin 311, Asus Flip CM3, Asus Detachable CM3 - Mediatek MT8516/MT8183: OLogic Pumpkin Board - NXP i.MX7: reMarkable Tablet - NXP i.MX8M: Kontron pitx-imx8m, Engicam i.Core MX8M Mini - Nuvoton NPCM730: Quanta GBS BMC - Qualcomm X55: Telit FN980 TLB SoM, Thundercomm TurboX T55 SoM - Qualcomm MSM8998: OnePlus 5/5T phones - Qualcomm SM8350: Snapdragon 888 Mobile Hardware Development Kit - Rockchip RK3399: NanoPi R4S board - STM32MP1: Engicam MicroGEA STM32MP1 MicroDev 2.0 and SOM, EDIMM2.2 Starter Kit, Carrier, SOM - TI AM65: Siemens SIMATIC IOT2050 gateway There is notable work going into extending already supported machines and SoCs: - ASpeed AST2500 - Allwinner A23, A83t, A31, A64, H6 - Amlogic G12B - Broadcom BCM4908 - Marvell Armada 7K/8K/CN91xx - Mediatek MT6589, MT7622, MT8173, MT8183, MT8195 - NXP i.MX8Q, i.MX8MM, i.MX8MP - Qualcomm MSM8916, SC7180, SDM845, SDX55, SM8350 - Renesas R-Car M3, V3U - Rockchip RK3328, RK3399 - STEricsson U8500 - STMicroelectronics STM32MP141 - Samsung Exynos 4412 - TI K3-AM65, K3-J7200 - TI OMAP3 Among the treewide cleanups and bug fixes, two parts stand out: - There are a number of cleanups for issues pointed out by 'make dtbs_check' this time, and I expect more to come in the future as we increasingly check for regressions. - After a change to the MMC subsystem that can lead to unpredictable device numbers, several platforms add 'aliases' properties for these to give each MMC controller a fixed number" * tag 'arm-dt-5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (516 commits) dt-bindings: mali-bifrost: add dma-coherent arm64: dts: amlogic: misc DT schema fixups arm64: dts: qcom: sc7180: Update iommu property for simultaneous playback arm64: dts: qcom: sc7180: pompom: Add "dmic_clk_en" + sound model arm64: dts: qcom: sc7180: coachz: Add "dmic_clk_en" ARM: dts: mstar: Add a dts for M5Stack UnitV2 dt-bindings: arm: mstar: Add compatible for M5Stack UnitV2 dt-bindings: vendor-prefixes: Add vendor prefix for M5Stack arm64: dts: mt8183: fix dtbs_check warning arm64: dts: mt8183-pumpkin: fix dtbs_check warning ARM: dts: aspeed: tiogapass: add hotplug controller ARM: dts: aspeed: amd-ethanolx: Enable all used I2C busses ARM: dts: aspeed: Rainier: Update to pass 2 hardware ARM: dts: aspeed: Rainier 1S4U: Fix fan nodes ARM: dts: aspeed: Rainier: Fix humidity sensor bus address ARM: dts: aspeed: Rainier: Fix PCA9552 on bus 8 ARM: dts: qcom: sdx55: add IPA information ARM: dts: qcom: sdx55: Add basic devicetree support for Thundercomm T55 dt-bindings: arm: qcom: Add binding for Thundercomm T55 kit ARM: dts: qcom: sdx55: Add basic devicetree support for Telit FN980 TLB ...
2021-04-26Merge tag 'arm-drivers-5.13' of ↵Linus Torvalds4-200/+152
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull ARM SoC driver updates from Arnd Bergmann: "Updates for SoC specific drivers include a few subsystems that have their own maintainers but send them through the soc tree: TEE/OP-TEE: - Add tracepoints around calls to secure world Memory controller drivers: - Minor fixes for Renesas, Exynos, Mediatek and Tegra platforms - Add debug statistics to Tegra20 memory controller - Update Tegra bindings and convert to dtschema ARM SCMI Firmware: - Support for modular SCMI protocols and vendor specific extensions - New SCMI IIO driver - Per-cpu DVFS The other driver changes are all from the platform maintainers directly and reflect the drivers that don't fit into any other subsystem as well as treewide changes for a particular platform. SoCFPGA: - Various cleanups contributed by Krzysztof Kozlowski Mediatek: - add MT8183 support to mutex driver - MMSYS: use per SoC array to describe the possible routing - add MMSYS support for MT8183 and MT8167 - add support for PMIC wrapper with integrated arbiter - add support for MT8192/MT6873 Tegra: - Bug fixes to PMC and clock drivers NXP/i.MX: - Update SCU power domain driver to keep console domain power on. - Add missing ADC1 power domain to SCU power domain driver. - Update comments for single global power domain in SCU power domain driver. - Add i.MX51/i.MX53 unique id support to i.MX SoC driver. NXP/FSL SoC driver updates for v5.13 - Add ACPI support for RCPM driver - Use generic io{read,write} for QE drivers after performance optimized for PowerPC - Fix QBMAN probe to cleanup HW states correctly for kexec - Various cleanup and style fix for QBMAN/QE/GUTS drivers OMAP: - Preparation to use devicetree for genpd - ti-sysc needs iorange check improved when the interconnect target module has no control registers listed - ti-sysc needs to probe l4_wkup and l4_cfg interconnects first to avoid issues with missing resources and unnecessary deferred probe - ti-sysc debug option can now detect more devices - ti-sysc now warns if an old incomplete devicetree data is found as we now rely on it being complete for am3 and 4 - soc init code needs to check for prcm and prm nodes for omap4/5 and dra7 - omap-prm driver needs to enable autoidle retention support for omap4 - omap5 clocks are missing gpmc and ocmc clock registers - pci-dra7xx now needs to use builtin_platform_driver instead of using builtin_platform_driver_probe for deferred probe to work Raspberry Pi: - Fix-up all RPi firmware drivers so as for unbind to happen in an orderly fashion - Support for RPi's PoE hat PWM bus Qualcomm - Improved detection for SCM calling conventions - Support for OEM specific wifi firmware path - Added drivers for SC7280/SM8350: RPMH, LLCC< AOSS QMP" * tag 'arm-drivers-5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (165 commits) soc: aspeed: fix a ternary sign expansion bug memory: mtk-smi: Add device-link between smi-larb and smi-common memory: samsung: exynos5422-dmc: handle clk_set_parent() failure memory: renesas-rpc-if: fix possible NULL pointer dereference of resource clk: socfpga: fix iomem pointer cast on 64-bit soc: aspeed: Adapt to new LPC device tree layout pinctrl: aspeed-g5: Adapt to new LPC device tree layout ipmi: kcs: aspeed: Adapt to new LPC DTS layout ARM: dts: Remove LPC BMC and Host partitions dt-bindings: aspeed-lpc: Remove LPC partitioning soc: fsl: enable acpi support in RCPM driver soc: qcom: mdt_loader: Detect truncated read of segments soc: qcom: mdt_loader: Validate that p_filesz < p_memsz soc: qcom: pdr: Fix error return code in pdr_register_listener firmware: qcom_scm: Fix kernel-doc function names to match firmware: qcom_scm: Suppress sysfs bind attributes firmware: qcom_scm: Workaround lack of "is available" call on SC7180 firmware: qcom_scm: Reduce locking section for __get_convention() firmware: qcom_scm: Make __qcom_scm_is_call_available() return bool Revert "soc: fsl: qe: introduce qe_io{read,write}* wrappers" ...
2021-04-26Merge tag 'arm-soc-5.13' of ↵Linus Torvalds7-269/+522
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull ARM SoC updates from Arnd Bergmann: "Almost all SoC code changes this time are for the TI OMAP platform, which continues its decade-long quest to move from describing a complex SoC in code to device tree. Aside from this, the Uniphier platform has a new maintainer and some platforms have minor bugfixes and cleanups that were not urgent enough for v5.12" * tag 'arm-soc-5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (96 commits) MAINTAINERS: Update ARM/UniPhier SoCs maintainers and status mailmap: Update email address for Nicolas Saenz MAINTAINERS: Update BCM2711/BCM2335 maintainer's mail ARM: exynos: correct kernel doc in platsmp ARM: hisi: use the correct HiSilicon copyright ARM: ux500: make ux500_cpu_die static ARM: s3c: Use pwm_get() in favour of pwm_request() in RX1950 ARM: OMAP1: fix incorrect kernel-doc comment syntax in file ARM: OMAP2+: fix incorrect kernel-doc comment syntax in file ARM: OMAP2+: Use DEFINE_SPINLOCK() for spinlock ARM: at91: pm: Move prototypes to mutually included header ARM: OMAP2+: use true and false for bool variable ARM: OMAP2+: add missing call to of_node_put() ARM: OMAP2+: Replace DEFINE_SIMPLE_ATTRIBUTE with DEFINE_DEBUGFS_ATTRIBUTE ARM: imx: Kconfig: Fix typo in help ARM: mach-imx: Fix a spelling in the file pm-imx5.c bus: ti-sysc: Warn about old dtb for dra7 and omap4/5 ARM: OMAP2+: Stop building legacy code for dra7 and omap4/5 ARM: OMAP2+: Drop legacy platform data for omap5 hwmod ARM: OMAP2+: Drop legacy platform data for omap5 l3 ...
2021-04-26Merge tag 'tty-5.13-rc1' of ↵Linus Torvalds1-8/+16
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty Pull tty and serial driver updates from Greg KH: "Here is the big set of tty and serial driver updates for 5.13-rc1. Actually busy this release, with a number of cleanups happening: - much needed core tty cleanups by Jiri Slaby - removal of unused and orphaned old-style serial drivers. If anyone shows up with this hardware, it is trivial to restore these but we really do not think they are in use anymore. - fixes and cleanups from Johan Hovold on a number of termios setting corner cases that loads of drivers got wrong as well as removing unneeded code due to tty core changes from long ago that were never propagated out to the drivers - loads of platform-specific serial port driver updates and fixes - coding style cleanups and other small fixes and updates all over the tty/serial tree. All of these have been in linux-next for a while now with no reported issues" * tag 'tty-5.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (186 commits) serial: extend compile-test coverage serial: stm32: add FIFO threshold configuration dt-bindings: serial: 8250: update TX FIFO trigger level dt-bindings: serial: stm32: override FIFO threshold properties dt-bindings: serial: add RX and TX FIFO properties serial: xilinx_uartps: drop low-latency workaround serial: vt8500: drop low-latency workaround serial: timbuart: drop low-latency workaround serial: sunsu: drop low-latency workaround serial: sifive: drop low-latency workaround serial: txx9: drop low-latency workaround serial: sa1100: drop low-latency workaround serial: rp2: drop low-latency workaround serial: rda: drop low-latency workaround serial: owl: drop low-latency workaround serial: msm_serial: drop low-latency workaround serial: mpc52xx_uart: drop low-latency workaround serial: meson: drop low-latency workaround serial: mcf: drop low-latency workaround serial: lpc32xx_hs: drop low-latency workaround ...
2021-04-26Merge tag 'timers-core-2021-04-26' of ↵Linus Torvalds2-2/+22
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull timer updates from Thomas Gleixner: "The time and timers updates contain: Core changes: - Allow runtime power management when the clocksource is changed. - A correctness fix for clock_adjtime32() so that the return value on success is not overwritten by the result of the copy to user. - Allow late installment of broadcast clockevent devices which was broken because nothing switched them over to oneshot mode. This went unnoticed so far because clockevent devices used to be built in, but now people started to make them modular. - Debugfs related simplifications - Small cleanups and improvements here and there Driver changes: - The usual set of device tree binding updates for a wide range of drivers/devices. - The usual updates and improvements for drivers all over the place but nothing outstanding. - No new clocksource/event drivers. They'll come back next time" * tag 'timers-core-2021-04-26' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (24 commits) posix-timers: Preserve return value in clock_adjtime32() tick/broadcast: Allow late registered device to enter oneshot mode tick: Use tick_check_replacement() instead of open coding it time/timecounter: Mark 1st argument of timecounter_cyc2time() as const dt-bindings: timer: nuvoton,npcm7xx: Add wpcm450-timer clocksource/drivers/arm_arch_timer: Add __ro_after_init and __init clocksource/drivers/timer-ti-dm: Handle dra7 timer wrap errata i940 clocksource/drivers/timer-ti-dm: Prepare to handle dra7 timer wrap issue clocksource/drivers/dw_apb_timer_of: Add handling for potential memory leak clocksource/drivers/npcm: Add support for WPCM450 clocksource/drivers/sh_cmt: Don't use CMTOUT_IE with R-Car Gen2/3 clocksource/drivers/pistachio: Fix trivial typo clocksource/drivers/ingenic_ost: Fix return value check in ingenic_ost_probe() clocksource/drivers/timer-ti-dm: Add missing set_state_oneshot_stopped clocksource/drivers/timer-ti-dm: Fix posted mode status check order dt-bindings: timer: renesas,cmt: Document R8A77961 dt-bindings: timer: renesas,cmt: Add r8a779a0 CMT support clocksource/drivers/ingenic-ost: Add support for the JZ4760B clocksource/drivers/ingenic: Add support for the JZ4760 dt-bindings: timer: ingenic: Add compatible strings for JZ4760(B) ...
2021-04-23ARM: dts: uniphier: Change phy-mode to RGMII-ID to enable delay pins for ↵Kunihiko Hayashi1-1/+1
RTL8211E UniPhier PXs2 boards have RTL8211E ethernet phy, and the phy have the RX/TX delays of RGMII interface using pull-ups on the RXDLY and TXDLY pins. After the commit bbc4d71d6354 ("net: phy: realtek: fix rtl8211e rx/tx delay config"), the delays are working correctly, however, "rgmii" means no delay and the phy doesn't work. So need to set the phy-mode to "rgmii-id" to show that RX/TX delays are enabled. Fixes: e3cc931921d2 ("ARM: dts: uniphier: add AVE ethernet node") Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-20Merge tag 'bmc-5.13-devicetree-2' of ↵Arnd Bergmann4-142/+201
git://git.kernel.org/pub/scm/linux/kernel/git/joel/bmc into arm/dt BMC device tree updates for 5.13, round two - Fixes to the first pull request for Rainier - Small changes for Rainier, EthanolX and Tiogapass * tag 'bmc-5.13-devicetree-2' of git://git.kernel.org/pub/scm/linux/kernel/git/joel/bmc: ARM: dts: aspeed: tiogapass: add hotplug controller ARM: dts: aspeed: amd-ethanolx: Enable all used I2C busses ARM: dts: aspeed: Rainier: Update to pass 2 hardware ARM: dts: aspeed: Rainier 1S4U: Fix fan nodes ARM: dts: aspeed: Rainier: Fix humidity sensor bus address ARM: dts: aspeed: Rainier: Fix PCA9552 on bus 8 Link: https://lore.kernel.org/r/CACPK8XeJdHmxyJn43Ju5hmxJ7+rJgHmx=ANFaL17YUmp+gOtJg@mail.gmail.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2021-04-19Merge tag 'qcom-dts-for-5.13-2' of ↵Arnd Bergmann5-3/+773
git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/dt More Qualcomm DTS updates for 5.13 This adds CPUfreq, interconnect providers, IPC, remoteproc and IPA to the SDX55 platform and then adds board files for the Telit FN980 TLB and Thundercomm TurboX T55. * tag 'qcom-dts-for-5.13-2' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: ARM: dts: qcom: sdx55: add IPA information ARM: dts: qcom: sdx55: Add basic devicetree support for Thundercomm T55 dt-bindings: arm: qcom: Add binding for Thundercomm T55 kit ARM: dts: qcom: sdx55: Add basic devicetree support for Telit FN980 TLB dt-bindings: arm: qcom: Add binding for Telit FN980 TLB board ARM: dts: qcom: sdx55: Add Modem remoteproc node ARM: dts: qcom: Fix node name for NAND controller node ARM: dts: qcom: sdx55: Add interconnect nodes ARM: dts: qcom: sdx55: Add SCM node dt-bindings: firmware: scm: Add compatible for SDX55 ARM: dts: qcom: sdx55: Add IMEM and PIL info region ARM: dts: qcom: sdx55: Add modem SMP2P node ARM: dts: qcom: sdx55: Add CPUFreq support ARM: dts: qcom: sdx55: Add support for APCS block ARM: dts: qcom: sdx55: Add support for A7 PLL clock Link: https://lore.kernel.org/r/20210419150956.860423-1-bjorn.andersson@linaro.org Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2021-04-19ARM: dts: mstar: Add a dts for M5Stack UnitV2Daniel Palmer2-0/+26
M5Stack are releasing a new widget based on the SigmaStar SSD202D. We have some support for the SSD202D so lets add a dts for it. Signed-off-by: Daniel Palmer <daniel@0x0f.com> Link: https://m5stack-store.myshopify.com/products/unitv2-ai-camera-gc2145 Link: https://lore.kernel.org/r/20210417011015.2105280-4-daniel@0x0f.com' Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2021-04-18Merge tag 'arm-fixes-5.12-3' of ↵Linus Torvalds1-0/+3
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull ARM SoC fixes from Arnd Bergmann: "Another smaller set of fixes for three of the Arm platforms: TI OMAP: Fix swapped mmc device order also for omap3 that got changed with the recent PROBE_PREFER_ASYNCHRONOUS changes. While eventually the aliases should be board specific, all the mmc device instances are all there in the SoC, and we do probe them by default so that PM runtime can idle the devices if left enabled from the bootloader. Qualcomm Snapdragon: This bypasses the recently introduced interconnect handling in the GENI (serial engine) driver when running off ACPI, as this causes the GENI probe to fail and the Lenovo Yoga C630 to boot without keyboard and touchpad. Allwinner: One 32kHz clock fix for the beelink gs1, a CD polarity fix for the SoPine, some MAINTAINERS maintainance, and a clk / reset switch to our headers" * tag 'arm-fixes-5.12-3' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: arm64: dts: allwinner: h6: beelink-gs1: Remove ext. 32 kHz osc reference MAINTAINERS: Match on allwinner keyword MAINTAINERS: Add our new mailing-list arm64: dts: allwinner: Fix SD card CD GPIO for SOPine systems arm64: dts: allwinner: h6: Switch to macros for RSB clock/reset indices ARM: OMAP2+: Fix uninitialized sr_inst ARM: dts: Fix swapped mmc order for omap3 ARM: OMAP2+: Fix warning for omap_init_time_of() soc: qcom: geni: shield geni_icc_get() for ACPI boot
2021-04-16ARM: dts: aspeed: tiogapass: add hotplug controllerPaul Fertser1-0/+5
The ADM1278 IC is accessible on I2C bus and on both Wiwynn and Quanta Tioga Pass implementations a pair of parallel 0.5 mOhm resistors is used for current measurement. Signed-off-by: Paul Fertser <fercerpav@gmail.com> Link: https://lore.kernel.org/r/20210415140521.11352-1-fercerpav@gmail.com Signed-off-by: Joel Stanley <joel@jms.id.au>
2021-04-16ARM: dts: aspeed: amd-ethanolx: Enable all used I2C bussesKonstantin Aladyshev1-0/+30
Enable all I2C busses that are used in AMD EthanolX CRB: i2c0 - APML P0 i2c1 - APML P1 i2c2 - FPGA i2c3 - 24LC128 EEPROM i2c4 - P0 Power regulators i2c5 - P1 Power regulators i2c6 - P0/P1 Thermal diode i2c7 - Thermal Sensors i2c8 - BMC I2C Signed-off-by: Konstantin Aladyshev <aladyshev22@gmail.com> Link: https://lore.kernel.org/r/20210415155300.1135-1-aladyshev22@gmail.com Signed-off-by: Joel Stanley <joel@jms.id.au>
2021-04-16ARM: dts: aspeed: Rainier: Update to pass 2 hardwareEddie James1-40/+153
Add the muxes present in pass 2 and remove the eeproms that were removed. Signed-off-by: Eddie James <eajames@linux.ibm.com> Signed-off-by: Joel Stanley <joel@jms.id.au>
2021-04-16ARM: dts: aspeed: Rainier 1S4U: Fix fan nodesEddie James1-1/+1
The 1S4U system populates fans 0, 1, 2, and 4. Update the dts to reflect this. Fixes: 7f03894a6555 ("ARM: dts: aspeed: Add Rainier 1S4U machine") Signed-off-by: Eddie James <eajames@linux.ibm.com> Reviewed-by: Joel Stanley <joel@jms.id.au> Signed-off-by: Joel Stanley <joel@jms.id.au>
2021-04-16ARM: dts: aspeed: Rainier: Fix humidity sensor bus addressEddie James1-2/+2
The si7021 was incorrectly placed at 0x20 on i2c bus 7. It is at 0x40. Fixes: 9c44db7096e0 ("ARM: dts: aspeed: rainier: Add i2c devices") Signed-off-by: Eddie James <eajames@linux.ibm.com> Reviewed-by: Joel Stanley <joel@jms.id.au> Signed-off-by: Joel Stanley <joel@jms.id.au>
2021-04-16ARM: dts: aspeed: Rainier: Fix PCA9552 on bus 8Eddie James1-99/+10
The second presence detection PCA9552 was incorrectly added to bus 9. Fixes: 8be44de6f209 ("ARM: dts: aspeed: Rainier: Add presence GPIOs") Signed-off-by: Eddie James <eajames@linux.ibm.com> Reviewed-by: Joel Stanley <joel@jms.id.au> Signed-off-by: Joel Stanley <joel@jms.id.au>
2021-04-14ARM: dts: qcom: sdx55: add IPA informationAlex Elder1-0/+41
Add IPA-related nodes and definitions to "sdx55.dtsi". The SMP2P nodes (ipa_smp2p_out and ipa_smp2p_in) are already present. Signed-off-by: Alex Elder <elder@linaro.org> Link: https://lore.kernel.org/r/20210409155251.955632-1-elder@linaro.org Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2021-04-14ARM: dts: qcom: sdx55: Add basic devicetree support for Thundercomm T55Manivannan Sadhasivam2-0/+282
Thundercomm T55 is the development platform based on the Qualcomm SDX55 chipset. This basic support includes support for debug serial, NAND flash, BAM DMA, USB and regulators support. https://www.thundercomm.com/app_en/product/1593506006365532 Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Link: https://lore.kernel.org/r/20210408170457.91409-14-manivannan.sadhasivam@linaro.org Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2021-04-14ARM: dts: qcom: sdx55: Add basic devicetree support for Telit FN980 TLBManivannan Sadhasivam2-1/+284
Telit FN980 TLB is the development platform based on the Qualcomm SDX55 chipset. This basic support includes support for debug serial, NAND flash, BAM DMA, USB and regulators support. Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Link: https://lore.kernel.org/r/20210408170457.91409-12-manivannan.sadhasivam@linaro.org Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2021-04-14ARM: dts: qcom: sdx55: Add Modem remoteproc nodeManivannan Sadhasivam1-0/+33
Add modem support to SDX55 using the PAS remoteproc driver. Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Link: https://lore.kernel.org/r/20210408170457.91409-16-manivannan.sadhasivam@linaro.org Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2021-04-14ARM: dts: qcom: Fix node name for NAND controller nodeManivannan Sadhasivam2-2/+2
Use the common "nand-controller" node name for NAND controller node to fix the `make dtbs_check` validation for Qcom platforms. Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Link: https://lore.kernel.org/r/20210408170457.91409-10-manivannan.sadhasivam@linaro.org Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2021-04-14ARM: dts: qcom: sdx55: Add interconnect nodesManivannan Sadhasivam1-0/+33
Add interconnect nodes for the providers in SDX55 platform. Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Link: https://lore.kernel.org/r/20210408170457.91409-9-manivannan.sadhasivam@linaro.org Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2021-04-14ARM: dts: qcom: sdx55: Add SCM nodeManivannan Sadhasivam1-0/+6
Add SCM node to enable SCM functionality on SDX55 platform. Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Link: https://lore.kernel.org/r/20210408170457.91409-8-manivannan.sadhasivam@linaro.org Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2021-04-14ARM: dts: qcom: sdx55: Add IMEM and PIL info regionManivannan Sadhasivam1-0/+15
Add a simple-mfd representing IMEM on SDX55 and define the PIL relocation info region, so that post mortem tools will be able to locate the loaded remoteproc. Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Link: https://lore.kernel.org/r/20210408170457.91409-6-manivannan.sadhasivam@linaro.org Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2021-04-14ARM: dts: qcom: sdx55: Add modem SMP2P nodeManivannan Sadhasivam1-0/+31
Add SMP2P nodes for the SDX55 platform to communicate with the modem. Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Link: https://lore.kernel.org/r/20210408170457.91409-5-manivannan.sadhasivam@linaro.org Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2021-04-14ARM: dts: qcom: sdx55: Add CPUFreq supportManivannan Sadhasivam1-0/+29
Add CPUFreq support to SDX55 platform using the cpufreq-dt driver. There is no dedicated hardware block available on this platform to carry on the CPUFreq duties. Hence, it is accomplished using the CPU clock and regulators tied together by the operating points table. Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Link: https://lore.kernel.org/r/20210408170457.91409-4-manivannan.sadhasivam@linaro.org Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2021-04-14ARM: dts: qcom: sdx55: Add support for APCS blockManivannan Sadhasivam1-0/+9
The APCS block on SDX55 acts as a mailbox controller and also provides clock output for the Cortex A7 CPU. Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Link: https://lore.kernel.org/r/20210408170457.91409-3-manivannan.sadhasivam@linaro.org Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2021-04-14ARM: dts: qcom: sdx55: Add support for A7 PLL clockManivannan Sadhasivam1-0/+8
On SDX55 there is a separate A7 PLL which is used to provide high frequency clock to the Cortex A7 CPU via a MUX. Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Link: https://lore.kernel.org/r/20210408170457.91409-2-manivannan.sadhasivam@linaro.org Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2021-04-13Merge tag 'v5.13-rockchip-dts32' of ↵Arnd Bergmann7-9/+24
git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into arm/dt MMC aliases fixups and some property/compatible cleanups. * tag 'v5.13-rockchip-dts32' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip: ARM: dts: rockchip: move rv1108 mmcx aliases to board dts files ARM: dts: rockchip: move rk322x mmcx aliases to board dts files ARM: dts: rockchip: remove clock-names property from watchdog node in rv1108.dtsi ARM: dts: rockchip: add new watchdog compatible to rk322x.dtsi ARM: dts: rockchip: add new watchdog compatible to rv1108.dtsi Link: https://lore.kernel.org/r/4638723.31r3eYUQgx@phil Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2021-04-12ARM: dts: at91: sama5d2/trivial: fix letter case for etm hex addressNicolas Ferre1-2/+2
Fix the etm node hex address to lower case for matching regexp specification and removing the additional warning that looks like: arch/arm/boot/dts/at91-sama5d2_ptc_ek.dt.yaml: /: 'etm@73C000' does not match any of the regexes: '@(0|[1-9a-f][0-9a-f]*)$', '^[^@]+$', 'pinctrl-[0-9]+' Reported-by: Arnd Bergmann <arnd@kernel.org> Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2021-04-11ARM: dts: rockchip: move rv1108 mmcx aliases to board dts filesHeiko Stuebner3-3/+8
As suggested by Arnd Bergmann, mmc-aliases are supposed to be board-specific, so move the newly added general aliases to the board-level on rv1108-based boards. Suggested-by: Arnd Bergmann <arnd@kernel.org> Signed-off-by: Heiko Stuebner <heiko.stuebner@theobroma-systems.com> Link: https://lore.kernel.org/r/20210324122235.1059292-2-heiko@sntech.de
2021-04-11ARM: dts: rockchip: move rk322x mmcx aliases to board dts filesHeiko Stuebner4-3/+14
As suggested by Arnd Bergmann, mmc-aliases are supposed to be board-specific, so move the newly added general aliases to the board-level on rk322x-based boards. Suggested-by: Arnd Bergmann <arnd@kernel.org> Signed-off-by: Heiko Stuebner <heiko.stuebner@theobroma-systems.com> Link: https://lore.kernel.org/r/20210324122235.1059292-1-heiko@sntech.de
2021-04-09Merge tag 'qcom-dts-for-5.13' of ↵Arnd Bergmann3-2/+65
git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/dt Qualcomm dts updates for v5.13 This adds Bluetooth support on the Samsung Galaxy S5, corrects the mount matrix for the IMU on Nexus 5 and corrects the fuel gauge irq trigger for the two devices. * tag 'qcom-dts-for-5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: ARM: dts: qcom: msm8974-klte: Add bluetooth support ARM: dts: qcom: msm8974: add blsp2_uart8 ARM: dts: qcom: msm8974-samsung-klte: correct fuel gauge interrupt trigger level ARM: dts: qcom: msm8974-lge-nexus5: correct fuel gauge interrupt trigger level ARM: dts: qcom: msm8974-hammerhead: add mount matrix for IMU Link: https://lore.kernel.org/r/20210409162359.776076-1-bjorn.andersson@linaro.org Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2021-04-09ARM: dts: clps711x: fix missing interrupt parentArnd Bergmann1-0/+1
The kernelci.org bot reports a build time regression: arch/arm/boot/dts/ep7209.dtsi:187.17-192.4: Warning (interrupts_property): /keypad: Missing interrupt-parent There is only one interrupt controller in this SoC, so I assume this is the parent. Fixes: 2bd86203acf3 ("ARM: dts: clps711x: Add keypad node") Reported-by: kernelci.org bot <bot@kernelci.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2021-04-09ARM: dts: mvebu: fix SPI device nodeArnd Bergmann1-1/+1
dtc warns about a mismatched address: arch/arm/boot/dts/armada-385-atl-x530.dts:171.14-199.4: Warning (spi_bus_reg): /soc/spi@10680/spi-flash@0: SPI bus unit address format error, expected "1" I assume the "reg" property is correct here, so adjust the unit address accordingly. Fixes: c6dfc019c239 ("ARM: dts: mvebu: Add device tree for ATL-x530 Board") Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Reported-by: kernelci.org bot <bot@kernelci.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2021-04-09Merge tag 'aspeed-5.13-lpc' of ↵Arnd Bergmann3-199/+151
git://git.kernel.org/pub/scm/linux/kernel/git/joel/bmc into arm/drivers ASPEED LPC updates for 5.13 These patches fix the ASPEED LPC bindings and LPC-related device drivers so in the future the KCS driver can properly use the hardware. * tag 'aspeed-5.13-lpc' of git://git.kernel.org/pub/scm/linux/kernel/git/joel/bmc: soc: aspeed: Adapt to new LPC device tree layout pinctrl: aspeed-g5: Adapt to new LPC device tree layout ipmi: kcs: aspeed: Adapt to new LPC DTS layout ARM: dts: Remove LPC BMC and Host partitions dt-bindings: aspeed-lpc: Remove LPC partitioning Link: https://lore.kernel.org/r/CACPK8Xcb12LsVr7CUaXXjQskKbVjb7x+jgueG1Hik-kBPWtDSg@mail.gmail.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2021-04-09Merge tag 'bmc-5.13-devicetree' of ↵Arnd Bergmann8-17/+3587
git://git.kernel.org/pub/scm/linux/kernel/git/joel/bmc into arm/dt BMC device tree updates for 5.13 The ASPEED and Nuvoton pull request now comes as a combined BMC pull request. - New machines * ASRock E3C246D4I, an AST2500 BMC for an Xeon E-2100/E-2200 mini-ITX system * Quanta GBS, an NPCM730 BMC for an x86 server - Power10 BMC updates for Everest and Rainier - GPIO line names for Mihawk * tag 'bmc-5.13-devicetree' of git://git.kernel.org/pub/scm/linux/kernel/git/joel/bmc: (21 commits) ARM: dts: nuvoton: Add Quanta GBS BMC Device Tree ARM: dts: aspeed: mihawk: Add GPIO line names ARM: dts: aspeed: Add Rainier 1S4U machine ARM: dts: aspeed: everest: Add size/address cells ARM: dts: aspeed: everest: Enable fan watchdog ARM: dts: aspeed: everest: Add RTC ARM: dts: aspeed: everest: GPIOs support ARM: dts: aspeed: everest: Add UCD90320 power sequencer ARM: dts: aspeed: everest: Add power supply i2c devices ARM: dts: aspeed: everest: Add pca9552 fan presence ARM: dts: aspeed: everest: Add FSI CFAMs and re-number engines ARM: dts: aspeed: everest: Add max31785 fan controller device ARM: dts: aspeed: everest: Add I2C components ARM: dts: aspeed: rainier 4U: Fix fan configuration ARM: dts: aspeed: rainier: Add missing fan nodes ARM: dts: aspeed: rainier: Enable fan watchdog ARM: dts: aspeed: rainier: Add presence GPIOs ARM: dts: aspeed: rainier: Add additional processor CFAMs ARM: dts: aspeed: rainier: Add gpio-keys-polled for fans ARM: dts: aspeed: rainier: Add directly controlled LEDs ... Link: https://lore.kernel.org/r/CACPK8Xe-KV5BeQwOH6NKC1++FCVqwwNCGBh7hEbBORfrmxfTtQ@mail.gmail.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2021-04-09ARM: dts: Add devicetree for Supermicro X9SCi-LN4F based on WPCM450Jonathan Neuschäfer2-0/+42
The Supermicro X9SCi-LN4F is a server mainboard featuring the WPCM450 BMC. This patch adds a minimal devicetree for Linux running on the BMC. Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Reviewed-by: Joel Stanley <joel@jms.id.au> Link: https://lore.kernel.org/r/20210406120921.2484986-10-j.neuschaefer@gmx.net Signed-off-by: Joel Stanley <joel@jms.id.au>
2021-04-09ARM: dts: Add devicetree for Nuvoton WPCM450 BMC chipJonathan Neuschäfer1-0/+76
The WPCM450 is an older BMC SoC in the Nuvoton NPCM family, originally marketed as Winbond WPCM450. This patch adds a devicetree with basic functionality. Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Reviewed-by: Joel Stanley <joel@jms.id.au> Link: https://lore.kernel.org/r/20210406120921.2484986-9-j.neuschaefer@gmx.net Signed-off-by: Joel Stanley <joel@jms.id.au>
2021-04-09ARM: dts: Remove LPC BMC and Host partitionsChia-Wei, Wang3-199/+151
The LPC controller has no concept of the BMC and the Host partitions. A concrete instance is that the HICRB[5:4] are for the I/O port address configurtaion of KCS channel 1/2. However, the KCS driver cannot access HICRB for channel 1/2 initialization via syscon regmap interface due to the parition boundary. (i.e. offset 80h) In addition, for the HW design backward compatibility, a newly added HW control bit could be located at any reserved one over the LPC addressing space. Thereby, this patch removes the lpc-bmc and lpc-host child node and thus the LPC partitioning. Note that this change requires the synchronization between device tree change and the driver change. To prevent the misuse of old devicetrees with new drivers, or vice versa, the v2 compatible strings are adopted for the LPC device as listed: "aspeed,ast2400-lpc-v2" "aspeed,ast2500-lpc-v2" "aspeed,ast2600-lpc-v2" Signed-off-by: Chia-Wei Wang <chiawei_wang@aspeedtech.com> Reviewed-by: Andrew Jeffery <andrew@aj.id.au> Link: https://lore.kernel.org/r/20210319062752.145730-2-andrew@aj.id.au Signed-off-by: Joel Stanley <joel@jms.id.au>
2021-04-08ARM: dts: owl-s500-roseapplepi: Add ATC2603C PMICCristian Ciocaltea1-6/+126
Add device tree node for ATC2603C PMIC and remove the 'fixed-3.1V' dummy regulator used for the uSD supply. Additionally, add 'SYSPWR' fixed regulator and provide cpu0 supply. Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@gmail.com> Signed-off-by: Manivannan Sadhasivam <mani@kernel.org> Reviewed-by: Manivannan Sadhasivam <mani@kernel.org> Link: https://lore.kernel.org/r/2e0a2931ae3757f016948e7c78e8e54afa325ae0.1615538629.git.cristian.ciocaltea@gmail.com Link: https://lore.kernel.org/r/20210408062232.3575-1-mani@kernel.org' Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2021-04-08Merge tag 'mvebu-dt-5.13-1' of ↵Arnd Bergmann2-0/+236
git://git.kernel.org/pub/scm/linux/kernel/git/gclement/mvebu into arm/dt mvebu dt for 5.13 (part 1) Add support for ATL-x530 Board (Armada 38x based) * tag 'mvebu-dt-5.13-1' of git://git.kernel.org/pub/scm/linux/kernel/git/gclement/mvebu: ARM: dts: mvebu: Add device tree for ATL-x530 Board Link: https://lore.kernel.org/r/87v98xbzir.fsf@BL-laptop Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2021-04-08Merge tag 'omap-for-v5.12/fixes-rc6-signed' of ↵Arnd Bergmann4-8/+13
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into arm/fixes Fixes for omaps for v5.12-rc cycle Fix swapped mmc device order also for omap3 that got changed with the recent PROBE_PREFER_ASYNCHRONOUS changes. While eventually the aliases should be board specific, all the mmc device instances are all there in the SoC, and we do probe them by default so that PM runtime can idle the devices if left enabled from the bootloader. Also included are two compiler warning fixes. * tag 'omap-for-v5.12/fixes-rc6-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: ARM: OMAP2+: Fix uninitialized sr_inst ARM: dts: Fix swapped mmc order for omap3 ARM: OMAP2+: Fix warning for omap_init_time_of() ARM: OMAP4: PM: update ROM return address for OSWR and OFF ARM: OMAP4: Fix PMIC voltage domains for bionic ARM: dts: Fix moving mmc devices with aliases for omap4 & 5 ARM: dts: Drop duplicate sha2md5_fck to fix clk_disable race Link: https://lore.kernel.org/r/pull-1617702755-711306@atomide.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2021-04-08clocksource/drivers/timer-ti-dm: Handle dra7 timer wrap errata i940Tony Lindgren2-2/+22
There is a timer wrap issue on dra7 for the ARM architected timer. In a typical clock configuration the timer fails to wrap after 388 days. To work around the issue, we need to use timer-ti-dm percpu timers instead. Let's configure dmtimer3 and 4 as percpu timers by default, and warn about the issue if the dtb is not configured properly. Let's do this as a single patch so it can be backported to v5.8 and later kernels easily. Note that this patch depends on earlier timer-ti-dm systimer posted mode fixes, and a preparatory clockevent patch "clocksource/drivers/timer-ti-dm: Prepare to handle dra7 timer wrap issue". For more information, please see the errata for "AM572x Sitara Processors Silicon Revisions 1.1, 2.0": https://www.ti.com/lit/er/sprz429m/sprz429m.pdf The concept is based on earlier reference patches done by Tero Kristo and Keerthy. Cc: Keerthy <j-keerthy@ti.com> Cc: Tero Kristo <kristo@kernel.org> Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20210323074326.28302-3-tony@atomide.com
2021-04-08ARM: dts: Add board-specific compatible string to npcm750-evb devicetreeJonathan Neuschäfer1-1/+1
According to the revised binding, the devicetree needs a board-specific compatible string. Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Link: https://lore.kernel.org/r/20210320164023.614059-2-j.neuschaefer@gmx.net Signed-off-by: Joel Stanley <joel@jms.id.au>
2021-04-08ARM: dts: nuvoton: Add Quanta GBS BMC Device TreeGeorge Hung2-0/+1136
Add the device tree for the Quanta GBS BMC based on NPCM730 SoC. Signed-off-by: George Hung <george.hung@quantatw.com> Reviewed-by: Joel Stanley <joel@jms.id.au> Link: https://lore.kernel.org/r/20210330071336.18370-1-george.hung@quantatw.com Signed-off-by: Joel Stanley <joel@jms.id.au>
2021-04-08ARM: dts: aspeed: mihawk: Add GPIO line namesNichole Wang1-0/+33
Name the GPIOs to help userspace work with them. The names describe the functionality the lines provide, not the net or ball name. This makes it easier to share userspace code across different systems and makes the use of the lines more obvious. Signed-off-by: Nichole Wang <Nichole_Wang@wistron.com> Reviewed-by: Joel Stanley <joel@jms.id.au> Link: https://lore.kernel.org/r/20210330020808.830-1-Nichole_Wang@wistron.com Signed-off-by: Joel Stanley <joel@jms.id.au>
2021-04-08ARM: dts: aspeed: Add Rainier 1S4U machineEddie James3-1/+16
The 1S4U version of the Rainier system has only 4 fans. Create a new tree, include the 4U version, and delete the 2 extra fans. Signed-off-by: Eddie James <eajames@linux.ibm.com> Link: https://lore.kernel.org/r/20210329150020.13632-23-eajames@linux.ibm.com Signed-off-by: Joel Stanley <joel@jms.id.au>
generated by cgit v1.2.3 (git 2.39.0) at 2024-07-14 10:31:31 +0300