summaryrefslogtreecommitdiff
path: root/arch/arm/boot
AgeCommit message (Collapse)AuthorFilesLines
2022-11-25ARM: dts: vexpress: align LED node names with dtschemaKrzysztof Kozlowski1-8/+8
The node names should be generic and DT schema expects certain pattern. vexpress-v2p-ca9.dtb: leds: 'user1', 'user2', 'user3', 'user4', 'user5', 'user6', 'user7', 'user8' do not match any of the regexes: '(^led-[0-9a-f]$|led)', 'pinctrl-[0-9]+' Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20221125144112.476817-1-krzysztof.kozlowski@linaro.org Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
2022-11-25ARM: dts: lan966x: Add otp supportHoratiu Vultur1-0/+5
Add OTP (one time programmable) support. The both lan966x SocS (lan9662 and lan9668) have the same OTP IP. Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com> Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Link: https://lore.kernel.org/r/20220916194946.2869510-1-horatiu.vultur@microchip.com
2022-11-25ARM: dts: at91: sama7g5ek: align power rails for sdmmc0/1Eugen Hristev1-1/+4
On this board SDMMC0 has a 1.8 signaled eMMC device powered at 3.3V. Hence, correctly describe the connected rails from the PMIC. SDMMC1 is connected to a voltage switch that can change from 3.3V to 1.8V by a hardware controlled pin. However SDMMC1 at the moment works only in 3.3V mode (default speed, no UHS-I modes), thus connect the signaling to the 3.3V rail. Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com> [claudiu.beznea: reshaped a bit the commit message] Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Link: https://lore.kernel.org/r/20221124154610.246790-1-eugen.hristev@microchip.com
2022-11-25media: ARM: dts: imx6qdl-wandboard: Drop clock-names propertyLad Prabhakar1-1/+0
Now that the driver has been updated to drop fetching the clk reference by name we no longer need the clock-names property in the ov5645 sensor node. This is in preparation for removal for clock-names property from the DT binding. Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Acked-by: Shawn Guo <shawnguo@kernel.org> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2022-11-25media: ARM: dts: imx6qdl-pico: Drop clock-names propertyLad Prabhakar1-1/+0
Now that the driver has been updated to drop fetching the clk reference by name we no longer need the clock-names property in the ov5645 sensor node. This is in preparation for removal for clock-names property from the DT binding. Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Acked-by: Shawn Guo <shawnguo@kernel.org> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2022-11-24Merge tag 'v6.2-rockchip-dts32-1' of ↵Arnd Bergmann2-1/+7
git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into arm/fixes Disabling of the unreliable arm-global-timer on earliest Rockchip SoCs, due to its frequency being bound to the changing cpu clock. * tag 'v6.2-rockchip-dts32-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip: ARM: dts: rockchip: disable arm_global_timer on rk3066 and rk3188
2022-11-23Merge tag 'v6.1-rockchip-dtsfixes1' of ↵Arnd Bergmann10-16/+11
git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into arm/fixes Fixes to make the automated binding tools happier (node-names, undocumented + unneeded properties) and fixes for non-working devices on some boards. * tag 'v6.1-rockchip-dtsfixes1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip: arm64: dts: rockchip: Fix Pine64 Quartz4-B PMIC interrupt ARM: dts: rockchip: rk3188: fix lcdc1-rgb24 node name arm64: dts: rockchip: fix ir-receiver node names ARM: dts: rockchip: fix ir-receiver node names arm64: dts: rockchip: fix adc-keys sub node names ARM: dts: rockchip: fix adc-keys sub node names arm: dts: rockchip: remove clock-frequency from rtc arm: dts: rockchip: fix node name for hym8563 rtc arm64: dts: rockchip: remove clock-frequency from rtc arm64: dts: rockchip: fix node name for hym8563 rtc arm64: dts: rockchip: lower rk3399-puma-haikou SD controller clock frequency arm64: dts: rockchip: keep I2S1 disabled for GPIO function on ROCK Pi 4 series arm64: dts: rockchip: fix quartz64-a bluetooth configuration arm64: dts: rockchip: add enable-strobe-pulldown to emmc phy on nanopi4 arm64: dts: rockchip: remove i2c5 from rk3566-roc-pc arm64: dts: rockchip: Fix i2c3 pinctrl on rk3566-roc-pc arm64: dts: rockchip: Fix gmac failure of rgmii-id from rk3566-roc-pc arm64: dts: rockchip: Drop RK3399-Scarlet's repeated ec_ap_int_l definition Link: https://lore.kernel.org/r/6274427.GXAFRqVoOG@phil Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2022-11-23Merge tag 'nuvoton-6.2-devicetree' of ↵Arnd Bergmann7-15/+75
git://git.kernel.org/pub/scm/linux/kernel/git/joel/bmc into soc/dt Nuvoton device tree updates for 6.2 - Update fix-partition syntax - WPCM450 updates for SPI controller, clock, watchdog, serial - GPIO line names for Supermicro X9SCI-LN4F BMC * tag 'nuvoton-6.2-devicetree' of git://git.kernel.org/pub/scm/linux/kernel/git/joel/bmc: ARM: dts: nuvoton: wpcm450: Add missing aliases for serial0/serial1 ARM: dts: wpcm450: Enable watchdog by default ARM: dts: wpcm450: Add clock controller node ARM: dts: wpcm450-supermicro-x9sci-ln4f: Add SPI flash ARM: dts: wpcm450: Add FIU SPI controller node ARM: dts: nuvoton: Remove bogus unit addresses from fixed-partition nodes ARM: dts: nuvoton,wpcm450-supermicro-x9sci-ln4f: Add GPIO line names Link: https://lore.kernel.org/r/CACPK8XffL5_L5D_ZGQid0r4h0wfTc+XBGUO1-0QW7ErPPrrvEQ@mail.gmail.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2022-11-23Merge tag 'aspeed-6.2-devicetree' of ↵Arnd Bergmann10-1553/+1704
git://git.kernel.org/pub/scm/linux/kernel/git/joel/bmc into soc/dt ASPEED device tree updates for 6.2 - New machines * IBM Bonnell AST2600 BMC, for a Power10 server * Delta AHE-50DC AST1250 BMC, for a 1U Open19 power shelf - Removed machines * IBM Mihawk AST2500 BMC, a Power9 server similar to Witherspoon - Fixes and updates for bletchley, mtjade/mtmitchell, rainier/everest * tag 'aspeed-6.2-devicetree' of git://git.kernel.org/pub/scm/linux/kernel/git/joel/bmc: ARM: dts: aspeed: mtjade: Add SMPro nodes ARM: dts: aspeed: mtjade,mtmitchell: Add BMC SSIF nodes ARM: dts: aspeed: Add Delta AHE-50DC BMC dt-bindings: arm: aspeed: document Delta AHE-50DC BMC ARM: dts: aspeed: rainier: Fix pca9551 nodes ARM: dts: aspeed: p10bmc: Add occ-hwmon nodes ARM: dts: aspeed-g6: Add aliases for mdio nodes ARM: dts: aspeed: Remove Mihawk ARM: dts: aspeed: rainier,everest: Move reserved memory regions ARM: dts: aspeed: Add IBM Bonnell system BMC devicetree ARM: dts: aspeed: bletchley: Enable emmc and ehci1 ARM: dts: aspeed: bletchley: Update and fix gpio-line-names ARM: dts: aspeed: bletchley: Update fusb302 nodes ARM: dts: aspeed: bletchley: Bind presence-sledX pins via gpio-keys ARM: dts: aspeed: bletchley: Disable GPIOV2 pull-down ARM: dts: aspeed: bletchley: Change LED sys_log_id to active low Link: https://lore.kernel.org/r/CACPK8Xfsc8BaL_qAgV+3Rk-AFcQoDVfTpMzHvq_rR-UYqwpNNQ@mail.gmail.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2022-11-23Merge tag 'tegra-for-6.2-arm-dt' of ↵Arnd Bergmann11-44/+42
git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into soc/dt ARM: tegra: Device tree changes for v6.2-rc1 This fixes various minor issues in device trees that are flagged by the DT validation tools. * tag 'tegra-for-6.2-arm-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux: ARM: tegra: Remove duplicate pin entry in pinmux ARM: tegra: Remove unused interrupt-parent properties ARM: tegra: Fix nvidia,io-reset properties ARM: tegra: Add missing power-supply for panels ARM: tegra: Fixup pinmux node names ARM: tegra: Use correct compatible string for ASUS TF101 panel Link: https://lore.kernel.org/r/20221119012025.3968358-6-thierry.reding@gmail.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2022-11-23Merge tag 'socfpga_dts_updates_for_v6.2' of ↵Arnd Bergmann9-9/+14
git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux into soc/dt SoCFPGA dts updates for v6.2 - Use the "clk-phase-sd-hs" property for SDMMC - Remove the "clk-phase" fom the sdmmc_clk that is no longer used - Clean dtschema for mmc node - Increase NAND partition for Arria10 * tag 'socfpga_dts_updates_for_v6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux: arm64: dts: socfpga: Add clk-phase-sd-hs property to the sdmmc node arm: dts: socfpga: Add clk-phase-sd-hs property to the sdmmc node arm: dts: socfpga: remove "clk-phase" in sdmmc_clk arm: dts: socfpga: align mmc node names with dtschema ARM: dts: socfpga: arria10: Increase NAND boot partition size Link: https://lore.kernel.org/r/20221121163259.341974-1-dinguyen@kernel.org Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2022-11-22ARM: dts: Unify pwm-omap-dmtimer node namesTony Lindgren6-7/+8
There is no reg property for pwm-omap-dmtimer. Cc: Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org> Cc: Rob Herring <robh+dt@kernel.org> Signed-off-by: Tony Lindgren <tony@atomide.com>
2022-11-22ARM: dts: Update omap3 musb to probe with ti-syscTony Lindgren4-17/+69
We can drop the legacy booting for the related musb driver if we update the omap3 SoCs variants to boot using ti-sysc interconnect target module. devicetree@vger.kernel.org Cc: H. Nikolaus Schaller <hns@goldelico.com> Tested-by: Sicelo A. Mhlongo <absicsz@gmail.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2022-11-22ARM: dts: am335x: Fix TDA998x ports addressingGeert Uytterhoeven2-2/+12
Fix addressing in the NXP TDA998x HDMI transmitters' subnodes: - Add missing #{address,size}-cells properties to ports capsule, - Add missing reg properties to port child nodes, - Drop bogus unit addresses from endpoint grandchildren nodes. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Message-Id: <e9ac64d29bc18b3b394fd9a2abbfeafacc624f98.1669047037.git.geert+renesas@glider.be> Signed-off-by: Tony Lindgren <tony@atomide.com>
2022-11-22ARM: dts: nuvoton: wpcm450: Add missing aliases for serial0/serial1Jonathan Neuschäfer1-0/+5
Without these, /chosen/stdout-path = "serial0:115200n8" does not work. Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20221008130822.1227104-1-j.neuschaefer@gmx.net Signed-off-by: Joel Stanley <joel@jms.id.au>
2022-11-22ARM: dts: wpcm450: Enable watchdog by defaultJonathan Neuschäfer2-5/+0
The watchdog timer is always usable, regardless of board design, so there is no point in marking the watchdog device as disabled-by-default in nuvoton-wpcm450.dtsi. Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Reviewed-by: Joel Stanley <joel@jms.id.au> Link: https://lore.kernel.org/r/20220609214830.127003-1-j.neuschaefer@gmx.net Signed-off-by: Joel Stanley <joel@jms.id.au>
2022-11-22ARM: dts: wpcm450: Add clock controller nodeJonathan Neuschäfer1-0/+17
This declares the clock controller and the necessary 48 Mhz reference clock in the WPCM450 device. Switching devices over to the clock controller is intentionally done in a separate patch to give time for the clock controller driver to land. Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Link: https://lore.kernel.org/r/20221104161850.2889894-5-j.neuschaefer@gmx.net Signed-off-by: Joel Stanley <joel@jms.id.au>
2022-11-22ARM: dts: wpcm450-supermicro-x9sci-ln4f: Add SPI flashJonathan Neuschäfer1-0/+9
Add the BMC firmware flash to the devicetree, so that it can be accessed from Linux. Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Link: https://lore.kernel.org/r/20221105185911.1547847-7-j.neuschaefer@gmx.net Signed-off-by: Joel Stanley <joel@jms.id.au>
2022-11-22ARM: dts: wpcm450: Add FIU SPI controller nodeJonathan Neuschäfer1-0/+16
Add the SPI controller (FIU, Flash Interface Unit) to the WPCM450 devicetree, according to the newly defined binding, as well as the SHM (shared memory interface) syscon. Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Link: https://lore.kernel.org/r/20221105185911.1547847-6-j.neuschaefer@gmx.net Signed-off-by: Joel Stanley <joel@jms.id.au>
2022-11-21Merge tag 'am335x-pcm-953-regulators' of ↵Arnd Bergmann1-15/+13
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into arm/fixes Regulator changes for am335x-pcm-953 This is for deferred probe issue on am335x-pcm-953 sdhci-omap regulator. * tag 'am335x-pcm-953-regulators' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: ARM: dts: am335x-pcm-953: Define fixed regulators in root node Link: https://lore.kernel.org/r/pull-1669036672-530717@atomide.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2022-11-21Merge tag 'stm32-dt-for-v6.2-1' of ↵Arnd Bergmann19-24/+537
git://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32 into soc/dt STM32 DT for v6.2, round 1 Highlights: ---------- - MPU: - ST boards: - Add MCP23017 IO expander support on stm32mp135f-dk board. - Add stm32g0 support for USB typeC on stm32mp135f-dk - Add USB (EHCI / OTG) on stm32mp135f-dk - Add ADC support on stm32mp135f-dk - Add USB2514B onboard hub on stm32mp157c-ev1 - DH: - Fix severals Yaml DT validation issues * tag 'stm32-dt-for-v6.2-1' of git://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32: (28 commits) ARM: dts: stm32: Rename mdio0 to mdio on DHCOR Testbench board ARM: dts: stm32: add mcp23017 IO expander on I2C1 on stm32mp135f-dk ARM: dts: stm32: add mcp23017 pinctrl entry for stm32mp13 ARM: dts: stm32: enable USB OTG in dual role mode on stm32mp135f-dk ARM: dts: stm32: add pins for stm32g0 typec controller on stm32mp13 ARM: dts: stm32: enable USB Host EHCI on stm32mp135f-dk ARM: dts: stm32: enable USB HS phys on stm32mp135f-dk ARM: dts: stm32: add fixed regulators to support usb on stm32mp135f-dk ARM: dts: stm32: add USB OTG HS support on stm32mp131 ARM: dts: stm32: add UBSH EHCI and OHCI support on stm32mp131 ARM: dts: stm32: add USBPHYC and dual USB HS PHY support on stm32mp131 ARM: dts: stm32: add PWR fixed regulators on stm32mp131 ARM: dts: stm32: Fix AV96 WLAN regulator gpio property ARM: dts: stm32: add adc support on stm32mp135f-dk ARM: dts: stm32: add dummy vdd_adc regulator on stm32mp135f-dk ARM: dts: stm32: add adc pins muxing on stm32mp135f-dk ARM: dts: stm32: add adc support to stm32mp13 ARM: dts: stm32: Drop MMCI interrupt-names ARM: dts: stm32: update vbus-supply of usbphyc_port0 on stm32mp157c-ev1 ARM: dts: stm32: add support for USB2514B onboard hub on stm32mp157c-ev1 ... Link: https://lore.kernel.org/r/3235e5be-d89f-f76c-5e25-5d1210feb857@foss.st.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2022-11-21Merge tag 'imx-dt-6.2' of ↵Arnd Bergmann26-32/+983
git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into soc/dt i.MX arm device tree update for 6.2: - New device tree for Kobo Aura 2 E-Boot reader which is built on i.MX6SL SoC. - Enable backlight and boost support for imx6sl-tolino-shine2hd. - Enable CYTTSP5 touchscreen support for E60K02. - Enable Silergy SY7636A EPD PMIC on imx7d-remarkable2 epaper tablet. - Add watchdog property 'fsl,suspend-in-wait' for i.MX6UL Phytec Phycore SoM to avoid watchdog triggering in 'freeze' low power mode. - Correct the polarity of AT86RF233 reset line for vf610-zii-dev-rev-c board. - A bunch of Colibri device tree updates from Marcel Ziswiler and Philippe Schenker, correct USBH_PEN property, remove spurious debounce property, add USB dual-role switching, and some cosmetic change. - Other small and random changes. * tag 'imx-dt-6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: ARM: dts: colibri-imx6ull: Enable dual-role switching ARM: dts: imx: e60k02: Add touchscreen ARM: dts: imx6qdl-sabre: Add mmc aliases ARM: dts: imx6ul/ull: suspend i.MX6UL watchdog in wait mode ARM: dts: imx7d-remarkable2: Enable silergy,sy7636a ARM: dts: imx6sl-tolino-shine2hd: Add backlight boost ARM: dts: imx6sl-tolino-shine2hd: Add backlight ARM: dts: colibri-imx7: fix confusing naming ARM: dts: colibri-imx6ull: add -hog to gpio hogs ARM: dts: colibri-imx6ull: enable default peripherals ARM: dts: colibri-imx6ull: keep peripherals disabled ARM: dts: ls1021: correct indentation ARM: dts: vf610-zii-dev-rev-c: fix polarity of at86rf233 reset line ARM: dts: imx7-colibri: remove spurious debounce property ARM: dts: colibri-imx6: specify usbh_pen gpio being active-low ARM: dts: colibri-imx6: move vbus-supply to module level device tree ARM: dts: colibri-imx6: usb dual-role switching ARM: dts: imx: Add devicetree for Kobo Aura 2 Link: https://lore.kernel.org/r/20221119125733.32719-4-shawnguo@kernel.org Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2022-11-21Merge tag 'imx-fixes-6.1-3' of ↵Arnd Bergmann1-2/+2
git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/fixes i.MX fixes for 6.1, part 3: - Fix a small memory leak in mach-mxs code. - Correct PCIe pad configuration for imx8mp-evk board. - Fix ref/tcxo clock frequency property for imx6q-prti6q board. * tag 'imx-fixes-6.1-3' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: ARM: dts: imx6q-prti6q: Fix ref/tcxo-clock-frequency properties arm64: dts: imx8mp-evk: correct pcie pad settings ARM: mxs: fix memory leak in mxs_machine_init() Link: https://lore.kernel.org/r/20221119073812.GQ16229@T480 Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2022-11-21Merge tag 'at91-fixes-6.1-2' of ↵Arnd Bergmann1-0/+9
https://git.kernel.org/pub/scm/linux/kernel/git/at91/linux into arm/fixes AT91 fixes for 6.1 #2 It contains: - fix UDC on at91sam9g20ek boards by adding vbus pin * tag 'at91-fixes-6.1-2' of https://git.kernel.org/pub/scm/linux/kernel/git/at91/linux: ARM: dts: at91: sam9g20ek: enable udc vbus gpio pinctrl Link: https://lore.kernel.org/r/20221118131205.301662-1-claudiu.beznea@microchip.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2022-11-21Merge tag 'sunxi-dt-for-6.2-1' of ↵Arnd Bergmann5-14/+87
https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into soc/dt - Added H616 USB node - Enabled bluetooth on Pinebook A64 - Added f1c100s PWM, I2C, CIR and LRADC nodes - Added USB HCI0 PHYs property to H3/H5 * tag 'sunxi-dt-for-6.2-1' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux: ARM: dts: sunxi: H3/H5: Add phys property to USB HCI0 ARM: dts: suniv: f1c100s: add LRADC node ARM: dts: suniv: f1c100s: add CIR DT node dt-bindings: media: IR: Add F1C100s IR compatible string ARM: dts: suniv: f1c100s: add I2C DT nodes ARM: dts: suniv: f1c100s: add PWM node dt-bindings: pwm: allwinner,sun4i-a10: Add F1C100s compatible arm64: dts: allwinner: a64: enable Bluetooth on Pinebook arm64: dts: allwinner: h616: X96 Mate: Add USB nodes arm64: dts: allwinner: h616: OrangePi Zero 2: Add USB nodes arm64: dts: allwinner: h616: Add USB nodes dt-bindings: usb: Add H616 compatible string ARM: dts: axp22x/axp809: Add GPIO controller nodes ARM: dts: axp803/axp81x: Drop GPIO LDO pinctrl nodes Link: https://lore.kernel.org/r/Y3fuAosinWbrj+Dy@jernej-laptop Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2022-11-21Merge tag 'at91-dt-6.2-2' of ↵Arnd Bergmann1-1/+1
https://git.kernel.org/pub/scm/linux/kernel/git/at91/linux into soc/dt AT91 DT for 6.2 #2 It contains: - one typo fix for a SAMA7G5 pin; the pin is not used anywhere in the device trees. * tag 'at91-dt-6.2-2' of https://git.kernel.org/pub/scm/linux/kernel/git/at91/linux: ARM: dts: at91: sama7g5: fix signal name of pin PD8 Link: https://lore.kernel.org/r/20221118131214.301678-1-claudiu.beznea@microchip.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2022-11-21ARM: dts: uniphier: Add Pro5 board supportKunihiko Hayashi3-0/+137
Initial version of devicetree sources for Pro5 EPCORE and ProEX boards. These boards have UART, I2C, USB, eMMC and PCI endpoint in common. Pro5 EPCORE board is a kind of Pro5 reference board with PCIe endpoint card edge connector. ProEX board shares peripherals with Linux and other systems, and some of these ports are available in Linux. Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com> Link: https://lore.kernel.org/r/20221117163219.3673-3-hayashi.kunihiko@socionext.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2022-11-21ARM: dts: exynos: Add new SoC specific compatible string for Exynos3250 SoCAakarsh Jain1-1/+1
Exynos3250 and Exynos5420 are using same compatible string for MFC codec device but they have different clock hierarchy and complexity. Add new compatible string followed by mfc-v7 fallback for Exynos3250 SoC. Suggested-by: Alim Akhtar <alim.akhtar@samsung.com> Signed-off-by: Aakarsh Jain <aakarsh.jain@samsung.com> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Tommaso Merciai <tommaso.merciai@amarulasolutions.com> Link: https://lore.kernel.org/r/20221114115024.69591-4-aakarsh.jain@samsung.com Link: https://lore.kernel.org/r/20221116093010.18515-1-krzysztof.kozlowski@linaro.org Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2022-11-20ARM: dts: nuvoton: Remove bogus unit addresses from fixed-partition nodesJonathan Neuschäfer5-10/+10
The unit addresses do not correspond to the nodes' reg properties, because they don't have any. Fixes: e42b650f828d ("ARM: dts: nuvoton: Add new device nodes to NPCM750 EVB") Fixes: ee33e2fb3d70 ("ARM: dts: nuvoton: Add Quanta GBS BMC Device Tree") Fixes: 59f5abe09f0a ("ARM: dts: nuvoton: Add Quanta GSJ BMC") Fixes: 14579c76f5ca ("ARM: dts: nuvoton: Add Fii Kudo system") Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Reviewed-by: Joel Stanley <joel@jms.id.au> Link: https://lore.kernel.org/r/20221031221553.163273-1-j.neuschaefer@gmx.net Signed-off-by: Joel Stanley <joel@jms.id.au>
2022-11-20ARM: dts: nuvoton,wpcm450-supermicro-x9sci-ln4f: Add GPIO line namesJonathan Neuschäfer1-0/+18
To make gpioinfo output more useful and enable gpiofind usage, add line names for GPIOs where the function is known. This patch follows the naming convention defined for OpenBMC, as much as possible: https://github.com/openbmc/docs/blob/master/designs/device-tree-gpio-naming.md Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Link: https://lore.kernel.org/r/20221101102916.440526-1-j.neuschaefer@gmx.net Signed-off-by: Joel Stanley <joel@jms.id.au>
2022-11-20ARM: dts: aspeed: mtjade: Add SMPro nodesQuan Nguyen1-0/+8
Add SMPro nodes to Mt. Jade BMC. Signed-off-by: Quan Nguyen <quan@os.amperecomputing.com> Link: https://lore.kernel.org/r/20221118065109.2339066-1-quan@os.amperecomputing.com Signed-off-by: Joel Stanley <joel@jms.id.au>
2022-11-20ARM: dts: aspeed: mtjade,mtmitchell: Add BMC SSIF nodesQuan Nguyen2-0/+8
Add BMC SSIF node to support IPMI in-band communication. Signed-off-by: Quan Nguyen <quan@os.amperecomputing.com> Link: https://lore.kernel.org/r/20221024081115.3320584-1-quan@os.amperecomputing.com Signed-off-by: Joel Stanley <joel@jms.id.au>
2022-11-20ARM: dts: aspeed: Add Delta AHE-50DC BMCZev Weiss2-0/+419
This is a 1U Open19 power shelf with six PSUs and 50 12VDC outputs via LM25066 efuses. It's managed by a pair of AST1250 BMCs in a redundant active/active configuration using a PCA9541 on each I2C bus to arbitrate access between the two. Signed-off-by: Zev Weiss <zev@bewilderbeest.net> Link: https://lore.kernel.org/r/20221108001551.18175-3-zev@bewilderbeest.net Signed-off-by: Joel Stanley <joel@jms.id.au>
2022-11-20ARM: dts: aspeed: rainier: Fix pca9551 nodesSantosh Puranik1-104/+104
The pca9551 compatible LED drivers are under the pca9546 mux on Rainier pass > 1. On pass 1, they are directly connected to the aspeed i2c. Signed-off-by: Santosh Puranik <santosh.puranik@in.ibm.com> Signed-off-by: Joel Stanley <joel@jms.id.au> Link: https://lore.kernel.org/r/20221102223554.1738642-1-joel@jms.id.au
2022-11-20ARM: dts: aspeed: p10bmc: Add occ-hwmon nodesEddie James3-0/+70
Add the occ-hwmon nodes in order to specify that the occ-hwmon driver should not poll the OCC during initialization. Signed-off-by: Eddie James <eajames@linux.ibm.com> Link: https://lore.kernel.org/r/20221101213212.643472-1-eajames@linux.ibm.com Signed-off-by: Joel Stanley <joel@jms.id.au>
2022-11-20ARM: dts: aspeed-g6: Add aliases for mdio nodesPotin Lai1-0/+4
Add aliases for mdio nodes so that we can use name to lookup the bus address of Aspeed SOC. For example: root@bletchley:~# cat /sys/firmware/devicetree/base/aliases/mdio0 /ahb/mdio@1e650000 root@bletchley:~# cat /sys/firmware/devicetree/base/aliases/mdio1 /ahb/mdio@1e650008 root@bletchley:~# cat /sys/firmware/devicetree/base/aliases/mdio2 /ahb/mdio@1e650010 root@bletchley:~# cat /sys/firmware/devicetree/base/aliases/mdio3 /ahb/mdio@1e650018 Signed-off-by: Potin Lai <potin.lai.pt@gmail.com> Link: https://lore.kernel.org/r/20221025055046.1704920-1-potin.lai.pt@gmail.com Signed-off-by: Joel Stanley <joel@jms.id.au>
2022-11-20ARM: dts: aspeed: Remove MihawkJoel Stanley2-1382/+0
The platform has been removed from OpenBMC as it is unmaintained. Link: https://lore.kernel.org/r/20221020224420.635938-1-joel@jms.id.au Signed-off-by: Joel Stanley <joel@jms.id.au>
2022-11-20ARM: dts: aspeed: rainier,everest: Move reserved memory regionsAdriana Kobylak2-16/+17
Move the reserved regions to account for a decrease in DRAM when ECC is enabled. ECC takes 1/9th of memory. Running on HW with ECC off, u-boot prints: DRAM: already initialized, 1008 MiB (capacity:1024 MiB, VGA:16 MiB, ECC:off) And with ECC on, u-boot prints: DRAM: already initialized, 896 MiB (capacity:1024 MiB, VGA:16 MiB, ECC:on, ECC size:896 MiB) This implies that MCR54 is configured for ECC to be bounded at the bottom of a 16MiB VGA memory region: 1024MiB - 16MiB (VGA) = 1008MiB 1008MiB / 9 (for ECC) = 112MiB 1008MiB - 112MiB = 896MiB (available DRAM) The flash_memory region currently starts at offset 896MiB: 0xb8000000 (flash_memory offset) - 0x80000000 (base memory address) = 0x38000000 = 896MiB This is the end of the available DRAM with ECC enabled and therefore it needs to be moved. Since the flash_memory is 64MiB in size and needs to be 64MiB aligned, it can just be moved up by 64MiB and would sit right at the end of the available DRAM buffer. The ramoops region currently follows the flash_memory, but it can be moved to sit above flash_memory which would minimize the address-space fragmentation. Signed-off-by: Adriana Kobylak <anoo@us.ibm.com> Reviewed-by: Andrew Jeffery <andrew@aj.id.au> Link: https://lore.kernel.org/r/20220916195535.1020185-1-anoo@linux.ibm.com Signed-off-by: Joel Stanley <joel@jms.id.au>
2022-11-20ARM: dts: aspeed: Add IBM Bonnell system BMC devicetreeEddie James2-0/+912
Add a devicetree for the new Bonnell system. Signed-off-by: Eddie James <eajames@linux.ibm.com> Reviewed-by: Jim Wright <wrightj@linux.ibm.com> Link: https://lore.kernel.org/r/20220818202422.741275-1-eajames@linux.ibm.com Signed-off-by: Joel Stanley <joel@jms.id.au>
2022-11-20ARM: dts: aspeed: bletchley: Enable emmc and ehci1Potin Lai1-0/+12
Enable both emmc-controller and emmc nodes for storage soultion on bletchley, and enable ehci1 node as second storage plan. Signed-off-by: Potin Lai <potin.lai.pt@gmail.com> Reviewed-by: Patrick Williams <patrick@stwcx.xyz> Link: https://lore.kernel.org/r/20220929013130.1916525-3-potin.lai.pt@gmail.com Signed-off-by: Joel Stanley <joel@jms.id.au>
2022-11-20ARM: dts: aspeed: bletchley: Update and fix gpio-line-namesPotin Lai1-2/+2
Update new GPIOM7 line name, and fixed typo of GPION6 line name New GPIO: - GPIOM7: USB_DEBUG_PWR_BTN_N Fixed GPIO: - GPION6: LED_POSTCODE_5 --> LED_POSTCODE_6 Signed-off-by: Potin Lai <potin.lai.pt@gmail.com> Reviewed-by: Patrick Williams <patrick@stwcx.xyz> Link: https://lore.kernel.org/r/20220929013130.1916525-2-potin.lai.pt@gmail.com Signed-off-by: Joel Stanley <joel@jms.id.au>
2022-11-20ARM: dts: aspeed: bletchley: Update fusb302 nodesPotin Lai1-48/+102
1. Add interrupt pin of fusb302 on each sled. 2. Add vbus-supply property in each fusb302 node. 3. Fix BMC power-role at source and data-role at host. 4. Disable PD to avoid "HARD Reset" due to incompatible PD ver. Signed-off-by: Potin Lai <potin.lai.pt@gmail.com> Reviewed-by: Patrick Williams <patrick@stwcx.xyz> Link: https://lore.kernel.org/r/20220613095150.21917-5-potin.lai.pt@gmail.com Signed-off-by: Joel Stanley <joel@jms.id.au>
2022-11-20ARM: dts: aspeed: bletchley: Bind presence-sledX pins via gpio-keysPotin Lai1-0/+35
Bind presence-sledX pins via gpio-keys driver to monitor and export GPIO pin values on DBUS using phosphor-gpio-presence service. Signed-off-by: Potin Lai <potin.lai.pt@gmail.com> Reviewed-by: Patrick Williams <patrick@stwcx.xyz> Link: https://lore.kernel.org/r/20220613095150.21917-4-potin.lai.pt@gmail.com Signed-off-by: Joel Stanley <joel@jms.id.au>
2022-11-20ARM: dts: aspeed: bletchley: Disable GPIOV2 pull-downPotin Lai1-0/+10
The external pull-up cannot drive GPIOV2, so disable GPIOV2 internal pull-down resistor by the request form HW team. Signed-off-by: Potin Lai <potin.lai.pt@gmail.com> Reviewed-by: Patrick Williams <patrick@stwcx.xyz> Link: https://lore.kernel.org/r/20220613095150.21917-3-potin.lai.pt@gmail.com Signed-off-by: Joel Stanley <joel@jms.id.au>
2022-11-20ARM: dts: aspeed: bletchley: Change LED sys_log_id to active lowPotin Lai1-1/+1
change LED sys_log_id to active low base on DVT schematic. Signed-off-by: Potin Lai <potin.lai.pt@gmail.com> Reviewed-by: Patrick Williams <patrick@stwcx.xyz> Link: https://lore.kernel.org/r/20220613095150.21917-2-potin.lai.pt@gmail.com Signed-off-by: Joel Stanley <joel@jms.id.au>
2022-11-19ARM: dts: imx6q-prti6q: Fix ref/tcxo-clock-frequency propertiesFabio Estevam1-2/+2
make dtbs_check gives the following errors: ref-clock-frequency: size (9) error for type uint32 tcxo-clock-frequency: size (9) error for type uint32 Fix it by passing the frequencies inside < > as documented in Documentation/devicetree/bindings/net/wireless/ti,wlcore.yaml. Signed-off-by: Fabio Estevam <festevam@denx.de> Fixes: 0d446a505592 ("ARM: dts: add Protonic PRTI6Q board") Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2022-11-19ARM: dts: colibri-imx6ull: Enable dual-role switchingPhilippe Schenker1-0/+29
The Colibri standard provides a GPIO called USBC_DET to switch from USB Host to USB Device and back. Make use of this GPIO by adding it with usb-connector framework. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2022-11-18arm: dts: socfpga: Add clk-phase-sd-hs property to the sdmmc nodeDinh Nguyen7-0/+7
The sdmmc controller's CIU(Card Interface Unit) clock's phase can be adjusted through the register in the system manager. Add the binding "altr,sysmgr-syscon" to the SDMMC node for the driver to access the system manager. Add the "clk-phase-sd-hs" property in the SDMMC node to designate the smpsel and drvsel properties for the CIU clock. Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
2022-11-18arm: dts: socfpga: remove "clk-phase" in sdmmc_clkDinh Nguyen2-2/+0
Now that the SDMMC driver can use the "clk-phase-sd-hs" binding, we don't need the clk-phase in the sdmmc_clk anymore. Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
2022-11-18arm: dts: socfpga: align mmc node names with dtschemaDinh Nguyen5-5/+5
dwmmc0@ff704000: $nodename:0: 'dwmmc0@ff704000' does not match '^mmc(@.*)?$' Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
generated by cgit v1.2.3 (git 2.39.0) at 2024-09-18 21:48:13 +0300