summaryrefslogtreecommitdiff
path: root/arch/arm/mach-davinci/da830.c
AgeCommit message (Collapse)AuthorFilesLines
2023-01-12ARM: davinci: clean up platform supportArnd Bergmann1-274/+0
With the board file support gone, and the platform using DT only, a lot of the remaining code is no longer referenced and can be removed. Technically, the DT file only references DA850, but since that is very similar to DA830, I'm leaving the latter. Acked-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2022-06-10treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_56.RULE ↵Thomas Gleixner1-4/+2
(part 1) Based on the normalized pattern: this file is licensed under the terms of the gnu general public license version 2 this program is licensed as is without any warranty of any kind whether express or implied extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference. Reviewed-by: Allison Randal <allison@lohutok.net> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-04-29ARM: davinci: remove include/mach/ subdirectoryArnd Bergmann1-6/+5
The files in include/mach are only used from mach/davinci, so they are no longer needed in the traditional location. Move them to arch/arm/mach-davinci/ and drop the logic for the special include path. The mach/uncompress.h file is not used at all and can just be removed. Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2019-08-07ARM: davinci: da830: switch to using the clocksource driverBartosz Golaszewski1-27/+14
We now have a proper clocksource driver for davinci. Switch the da830 platform to using it. Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Reviewed-by: David Lechner <david@lechnology.com> Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2019-08-07ARM: davinci: WARN_ON() if clk_get() failsBartosz Golaszewski1-0/+4
Currently the timer code checks if the clock pointer passed to it is good (!IS_ERR(clk)). The new clocksource driver expects the clock to be functional and doesn't perform any checks so emit a warning if clk_get() fails. Apply this to all davinci platforms. Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Reviewed-by: David Lechner <david@lechnology.com> Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2019-05-15clk: Remove io.h from clk-provider.hStephen Boyd1-0/+1
Now that we've gotten rid of clk_readl() we can remove io.h from the clk-provider header and push out the io.h include to any code that isn't already including the io.h header but using things like readl/writel, etc. Found with this grep: git grep -l clk-provider.h | grep '.c$' | xargs git grep -L 'linux/io.h' | \ xargs git grep -l \ -e '\<__iowrite32_copy\>' --or \ -e '\<__ioread32_copy\>' --or \ -e '\<__iowrite64_copy\>' --or \ -e '\<ioremap_page_range\>' --or \ -e '\<ioremap_huge_init\>' --or \ -e '\<arch_ioremap_pud_supported\>' --or \ -e '\<arch_ioremap_pmd_supported\>' --or \ -e '\<devm_ioport_map\>' --or \ -e '\<devm_ioport_unmap\>' --or \ -e '\<IOMEM_ERR_PTR\>' --or \ -e '\<devm_ioremap\>' --or \ -e '\<devm_ioremap_nocache\>' --or \ -e '\<devm_ioremap_wc\>' --or \ -e '\<devm_iounmap\>' --or \ -e '\<devm_ioremap_release\>' --or \ -e '\<devm_memremap\>' --or \ -e '\<devm_memunmap\>' --or \ -e '\<__devm_memremap_pages\>' --or \ -e '\<pci_remap_cfgspace\>' --or \ -e '\<arch_has_dev_port\>' --or \ -e '\<arch_phys_wc_add\>' --or \ -e '\<arch_phys_wc_del\>' --or \ -e '\<memremap\>' --or \ -e '\<memunmap\>' --or \ -e '\<arch_io_reserve_memtype_wc\>' --or \ -e '\<arch_io_free_memtype_wc\>' --or \ -e '\<__io_aw\>' --or \ -e '\<__io_pbw\>' --or \ -e '\<__io_paw\>' --or \ -e '\<__io_pbr\>' --or \ -e '\<__io_par\>' --or \ -e '\<__raw_readb\>' --or \ -e '\<__raw_readw\>' --or \ -e '\<__raw_readl\>' --or \ -e '\<__raw_readq\>' --or \ -e '\<__raw_writeb\>' --or \ -e '\<__raw_writew\>' --or \ -e '\<__raw_writel\>' --or \ -e '\<__raw_writeq\>' --or \ -e '\<readb\>' --or \ -e '\<readw\>' --or \ -e '\<readl\>' --or \ -e '\<readq\>' --or \ -e '\<writeb\>' --or \ -e '\<writew\>' --or \ -e '\<writel\>' --or \ -e '\<writeq\>' --or \ -e '\<readb_relaxed\>' --or \ -e '\<readw_relaxed\>' --or \ -e '\<readl_relaxed\>' --or \ -e '\<readq_relaxed\>' --or \ -e '\<writeb_relaxed\>' --or \ -e '\<writew_relaxed\>' --or \ -e '\<writel_relaxed\>' --or \ -e '\<writeq_relaxed\>' --or \ -e '\<readsb\>' --or \ -e '\<readsw\>' --or \ -e '\<readsl\>' --or \ -e '\<readsq\>' --or \ -e '\<writesb\>' --or \ -e '\<writesw\>' --or \ -e '\<writesl\>' --or \ -e '\<writesq\>' --or \ -e '\<inb\>' --or \ -e '\<inw\>' --or \ -e '\<inl\>' --or \ -e '\<outb\>' --or \ -e '\<outw\>' --or \ -e '\<outl\>' --or \ -e '\<inb_p\>' --or \ -e '\<inw_p\>' --or \ -e '\<inl_p\>' --or \ -e '\<outb_p\>' --or \ -e '\<outw_p\>' --or \ -e '\<outl_p\>' --or \ -e '\<insb\>' --or \ -e '\<insw\>' --or \ -e '\<insl\>' --or \ -e '\<outsb\>' --or \ -e '\<outsw\>' --or \ -e '\<outsl\>' --or \ -e '\<insb_p\>' --or \ -e '\<insw_p\>' --or \ -e '\<insl_p\>' --or \ -e '\<outsb_p\>' --or \ -e '\<outsw_p\>' --or \ -e '\<outsl_p\>' --or \ -e '\<ioread8\>' --or \ -e '\<ioread16\>' --or \ -e '\<ioread32\>' --or \ -e '\<ioread64\>' --or \ -e '\<iowrite8\>' --or \ -e '\<iowrite16\>' --or \ -e '\<iowrite32\>' --or \ -e '\<iowrite64\>' --or \ -e '\<ioread16be\>' --or \ -e '\<ioread32be\>' --or \ -e '\<ioread64be\>' --or \ -e '\<iowrite16be\>' --or \ -e '\<iowrite32be\>' --or \ -e '\<iowrite64be\>' --or \ -e '\<ioread8_rep\>' --or \ -e '\<ioread16_rep\>' --or \ -e '\<ioread32_rep\>' --or \ -e '\<ioread64_rep\>' --or \ -e '\<iowrite8_rep\>' --or \ -e '\<iowrite16_rep\>' --or \ -e '\<iowrite32_rep\>' --or \ -e '\<iowrite64_rep\>' --or \ -e '\<__io_virt\>' --or \ -e '\<pci_iounmap\>' --or \ -e '\<virt_to_phys\>' --or \ -e '\<phys_to_virt\>' --or \ -e '\<ioremap_uc\>' --or \ -e '\<ioremap\>' --or \ -e '\<__ioremap\>' --or \ -e '\<iounmap\>' --or \ -e '\<ioremap\>' --or \ -e '\<ioremap_nocache\>' --or \ -e '\<ioremap_uc\>' --or \ -e '\<ioremap_wc\>' --or \ -e '\<ioremap_wc\>' --or \ -e '\<ioremap_wt\>' --or \ -e '\<ioport_map\>' --or \ -e '\<ioport_unmap\>' --or \ -e '\<ioport_map\>' --or \ -e '\<ioport_unmap\>' --or \ -e '\<xlate_dev_kmem_ptr\>' --or \ -e '\<xlate_dev_mem_ptr\>' --or \ -e '\<unxlate_dev_mem_ptr\>' --or \ -e '\<virt_to_bus\>' --or \ -e '\<bus_to_virt\>' --or \ -e '\<memset_io\>' --or \ -e '\<memcpy_fromio\>' --or \ -e '\<memcpy_toio\>' I also reordered a couple includes when they weren't alphabetical and removed clk.h from kona, replacing it with clk-provider.h because that driver doesn't use clk consumer APIs. Acked-by: Geert Uytterhoeven <geert+renesas@glider.be> Cc: Chen-Yu Tsai <wens@csie.org> Acked-by: Maxime Ripard <maxime.ripard@bootlin.com> Acked-by: Tero Kristo <t-kristo@ti.com> Acked-by: Sekhar Nori <nsekhar@ti.com> Cc: Krzysztof Kozlowski <krzk@kernel.org> Acked-by: Mark Brown <broonie@kernel.org> Cc: Chris Zankel <chris@zankel.net> Acked-by: Max Filippov <jcmvbkbc@gmail.com> Acked-by: John Crispin <john@phrozen.org> Acked-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-02-19ARM: davinci: remove intc related fields from davinci_soc_infoBartosz Golaszewski1-98/+0
The fields related to the two davinci interrupt controllers are no longer used. Remove them. Reviewed-by: David Lechner <david@lechnology.com> Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2019-02-19ARM: davinci: cp-intc: use the new-style config structureBartosz Golaszewski1-1/+1
Modify the cp-intc driver to take all its configuration from the new config structure. Stop referencing davinci_soc_info in any way. Move the declaration for davinci_cp_intc_init() to irq-davinci-cp-intc.h and make it take the new config structure as parameter. Convert all users to the new version. Also: since the two da8xx SoCs default all irq priorities to 7, just drop the priority configuration at all and hardcode the channels to 7. It will simplify the driver code and make our lives easier when it comes to device-tree support. Reviewed-by: David Lechner <david@lechnology.com> Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2019-02-19ARM: davinci: cp-intc: use a common prefix for all symbolsBartosz Golaszewski1-1/+1
In preparation for moving the driver to drivers/irqchip do some cleanup: use a common prefix for all symbols. Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Reviewed-by: David Lechner <david@lechnology.com> Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2019-02-19ARM: davinci: cp-intc: add the new config structures for da8xx SoCsBartosz Golaszewski1-0/+10
Add the new-style config structures for da8xx SoCs. They will be used once we make the cp-intc driver stop using davinci_soc_info. Reviewed-by: David Lechner <david@lechnology.com> Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2019-02-19ARM: davinci: cp-intc: add a wrapper around cp_intc_init()Bartosz Golaszewski1-0/+5
We're going to extend the cp_intc_init() function with a config structure so we can drop the intc-related fields from davinci_soc_info. Once we do it, we won't be able to use this routine directly as the init_irq callback. Wrap the calls in additional helpers that don't take parameters and can be assigned to init_irq. Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Reviewed-by: David Lechner <david@lechnology.com> Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2019-02-19ARM: davinci: make irqs.h a local headerBartosz Golaszewski1-1/+1
The existence of irqs.h in mach-davinci/include/mach only makes sense without SPARSE_IRQ as it's then expected to define NR_IRQS and is included from asm/irq.h. As we now support SPARSE_IRQ, this header can be moved to mach-davinci and used as the source of HW interrupt numbers. While updating the includes in various files - also rearrange the headers by directory (linux/asm/mach). Reviewed-by: David Lechner <david@lechnology.com> Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2019-02-19ARM: davinci: wrap HW interrupt numbers with a macroBartosz Golaszewski1-6/+6
Once we select SPARSE_IRQ, the interrupt numbers defined in mach/irqs.h will only signify the hardware interrupt offsets, not the interrupt numbers seen by linux. Introduce a wrapper macro that translates the hwirq number to virtual numbers. For now it's just a dummy. Use that macro when specifying the interrupts in resources for platform devices. Reviewed-by: David Lechner <david@lechnology.com> Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2019-02-19ARM: davinci: remove davinci_intc_typeBartosz Golaszewski1-1/+0
We now use the generic ARM irq handler on davinci. There are no more users that check davinci_intc_type. Remove the variable and all its references. Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Reviewed-by: David Lechner <david@lechnology.com> Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2018-11-27ARM: davinci: da830: set the GPIO base to 0Bartosz Golaszewski1-1/+3
Commit 587f7a694f01 ("gpio: davinci: Use dev name for label and automatic base selection") broke the GPIO support on DaVinci boards in legacy mode by allowing gpiolib to set the GPIO base automatically. DaVinci board files use the legacy GPIO API with hard-coded GPIO line numbers. Use the new fields in struct davinci_gpio_platform_data to manually set the GPIO base to 0. Fixes: 587f7a694f01 ("gpio: davinci: Use dev name for label and automatic base selection") Cc: stable@vger.kernel.org Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2018-06-26ARM: davinci: da830: Remove legacy clock initDavid Lechner1-412/+0
This removes the unused legacy clock init code from arch/arm/mach-davinci/da830.c. Signed-off-by: David Lechner <david@lechnology.com> Reviewed-by: Sekhar Nori <nsekhar@ti.com> Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2018-06-26ARM: davinci: da830: add new clock init using common clock frameworkDavid Lechner1-6/+64
This adds the new board-specific clock init in mach-davinci/da830.c using the new common clock framework drivers. The #ifdefs are needed to prevent compile errors until the entire ARCH_DAVINCI is converted. Also clean up the #includes since we are adding some here. Reviewed-by: Sekhar Nori <nsekhar@ti.com> Signed-off-by: David Lechner <david@lechnology.com> Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2018-06-26ARM: davinci: pass clock as parameter to davinci_timer_init()David Lechner1-1/+1
This changes davinci_timer_init() so that we pass the clock as a parameter instead of using clk_get(). This is done in preparation for converting to the common clock framework. It removes the requirement that we have to have a clock with con_id of "timer0", which will be good for DT bindings since clock-names = "timer0" doesn't really make sense. Also, drop use of extern in header file since we are touching the definition. Reviewed-by: Sekhar Nori <nsekhar@ti.com> Signed-off-by: David Lechner <david@lechnology.com> Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2018-02-19ARM: davinci: move davinci_clk_init() to init_timeDavid Lechner1-2/+5
This moves the call of davinci_clk_init() from map_io to init_time for all boards. This is the proper place to init clocks. This is also done in preparation for moving to the common clock framework. dm646x is a special case because we need to handle different ref_clk rates depending on which board is being used. The clock init in this case is modified to set the rate before registering the clocks instead of using davinci_set_refclk_rate() to recalculate the entire clock tree after all of the clocks are registered. Also, the cpu_clks field is removed from struct davinci_soc_info since it is no longer needed. Signed-off-by: David Lechner <david@lechnology.com> Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2018-02-02Merge tag 'armsoc-soc' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC platform updates from Arnd Bergmann: "These are mostly minor bugfixes, cleanup and many defconfig updates to support added drivers. In particular OMAP and PXA keep cleaning up the legacy code base, as usual. Nvidia adds some more SoC support code for Tegra 186. For the first time on years, we are actually adding a non-DT platform for the EP93xx based Liebherr controller BK3.1. It's a minor variation of the EP93xx reference design and in active use, while EP93xx apparently doesn't have enough new development to have any device tree support" * tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (73 commits) ARM: omap: hwmod: fix section mismatch warnings ARM: pxa/tosa-bt: add MODULE_LICENSE tag arm64: defconfig: enable CONFIG_ACPI_APEI_EINJ arm64: defconfig: enable EDAC GHES option arm64: defconfig: enable CONFIG_ACPI_APEI_MEMORY_FAILURE ARM: imx_v6_v7_defconfig: enable CONFIG_CPU_FREQ_STAT Wind down ARM/TANGO port ARM: davinci: constify gpio_led ARM: davinci: drop unneeded newline soc: Add SoC driver for Gemini ARM: SAMSUNG: Add SPDX license identifiers ARM: S5PV210: Add SPDX license identifiers ARM: S3C64XX: Add SPDX license identifiers ARM: S3C24XX: Add SPDX license identifiers ARM: EXYNOS: Add SPDX license identifiers ARM: imx: remove unused imx3 pm definitions ARM: imx: don't abort MMDC probe if power saving status doesn't match ARM: imx_v6_v7_defconfig: enable RTC_DRV_MXC_V2 ARM: imx_v6_v7_defconfig: Add missing config for DART-MX6 SoM ARM: davinci: Use PTR_ERR_OR_ZERO() ...
2018-01-09ARM: da8xx: remove con_id from USB clocksDavid Lechner1-2/+2
There is only one clock each for "musb-da8xx" and "ohci-da8xx", so we do not the the con_id. Removing them will also prevent needing an unnecessary device tree property when device tree bindings are added for clocks. Signed-off-by: David Lechner <david@lechnology.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-12-23ARM: davinci: make davinci_soc_info structures constBhumika Goyal1-1/+1
Make davinci_soc_info structures const as they are either passed to the function davinci_common_init having the argument as const or their field cpu_clks of type struct clk_lookup * is passed to the function davinci_clk_init. So, the fields are never modified and the structures can be const. Done using Coccinelle. Signed-off-by: Bhumika Goyal <bhumirks@gmail.com> [nsekhar@ti.com: minor commit message adjustment] Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2017-04-11ARM: davinci: Add clock for CPPI 4.1 DMA engineAlexandre Bailon1-0/+6
The CPPI 4.1 DMA in USB subsystem shares its clock with the USB OTG, and most of the time, the clock will be enabled by USB. But during the init of the DMA, USB is not enabled (waiting for DMA), and then we must enable the DMA clock before doing anything. Add clock for the CPPI 4.1 DMA engine. Signed-off-by: Alexandre Bailon <abailon@baylibre.com> [nsekhar@ti.com: minor commit message tweaks] Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2016-11-23ARM: davinci: da8xx: Fix ohci device nameAxel Haslam1-1/+1
While the clk lookup table is making reference to "ohci" other subsystems (such as phy) are trying to match "ohci.0" Since there is a single ohci instance, instead of changing the clk name, change the dev id to -1, and add the "-da8xx" postfix to match the driver name that will also be changed in a subsequent patch. Signed-off-by: Axel Haslam <ahaslam@baylibre.com> Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2016-10-31ARM: davinci: da8xx: Add USB device names to clock lookup tablesDavid Lechner1-2/+2
This adds device names for the SoC USB devices to the clock lookup tables in da830.c and da850.c. Also add the USB device names to the da850_auxdata_lookup[] table. Signed-off-by: David Lechner <david@lechnology.com> Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2016-04-27ARM: davinci: Move clock init after ioremap.David Lechner1-0/+2
Some clocks (such as the USB PHY clocks in DA8xx) will need to use iomem. The davinci_common_init() function must be called before the ioremap, so the clock init is now split out as separate function. Signed-off-by: David Lechner <david@lechnology.com> Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2015-12-01ARM: davinci: make headers more localArnd Bergmann1-1/+1
Some header files are never included outside of a mach-davinci directory and do not need to be made visible in include/mach, so let's just move them all down one level. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Sekhar Nori <nsekhar@ti.com>
2014-01-17Merge tag 'davinci-for-v3.14/watchdog' of ↵Kevin Hilman1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/nsekhar/linux-davinci into next/drivers From Sekhar Nori: This patch updates the davinci watchdog platform device name from generic "watchdog" to something more specific. * tag 'davinci-for-v3.14/watchdog' of git://git.kernel.org/pub/scm/linux/kernel/git/nsekhar/linux-davinci: watchdog: davinci: rename platform driver to davinci-wdt Signed-off-by: Kevin Hilman <khilman@linaro.org>
2014-01-09watchdog: davinci: rename platform driver to davinci-wdtIvan Khoronzhuk1-1/+1
As we switch to use the watchdog core which permits more than one active watchdog in the system, rename platform driver to "davinci-wdt" to be identifiable. Acked-by: Wim Van Sebroeck <wim@iguana.be> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Ivan Khoronzhuk <ivan.khoronzhuk@ti.com> Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2013-12-25gpio: davinci: remove unused variable intc_irq_numLad, Prabhakar1-1/+0
As the davinci-gpio driver is migrated to use irqdomain there is no need to pass the irq base for the gpio driver. This patch removes this variable from davinci_gpio_platform_data and also the refrences from the machine file. Signed-off-by: Lad, Prabhakar <prabhakar.csengg@gmail.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2013-09-24ARM: davinci: da8xx: support gpio platform deviceKV Sujith1-5/+11
DaVinci GPIO driver now uses platform device model. Convert DA8XX SoC code to use the new model. Add da8xx_register_gpio() to create platform device for da8xx platforms. Signed-off-by: KV Sujith <sujithkv@ti.com> Signed-off-by: Philip Avinash <avinashphilip@ti.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> [nsekhar@ti.com: simplify commit message] Signed-off-by: Sekhar Nori <nsekhar@ti.com> Signed-off-by: Lad, Prabhakar <prabhakar.csengg@gmail.com>
2013-08-21ARM: davinci: fix clock lookup for mdio deviceLad, Prabhakar1-0/+1
This patch removes the clock alias for mdio device and adds a entry in clock lookup table, this entry can now be used by both DT and non-DT case. Signed-off-by: Lad, Prabhakar <prabhakar.csengg@gmail.com> Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2013-08-21ARM: davinci: serial: remove davinci_serial_setup_clk()Manjunathappa, Prakash1-1/+0
Get rid of davinci_serial_setup_clk() since its not called from multiple places now. Instead initialize clock in davinci_serial_init() itself. This also helps get rid of "serial_dev" member of struct davinci_soc_info. Signed-off-by: Manjunathappa, Prakash <prakash.pm@ti.com> Suggested-by: Sekhar Nori <nsekhar@ti.com> [nsekhar@ti.com: split removal of davinci_serial_setup_clk() into a separate patch.] Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2013-07-22ARM: davinci: uart: move to devid based clk_getManjunathappa, Prakash1-4/+4
For modules having single clock, clk_get should be done with dev_id. But current davinci implementation handles multiple instances of the UART devices with single platform_device_register. Hence clk_get is based on con_id rather than dev_id, this is not correct. Do platform_device_register for each instance and clk_get on dev_id. Signed-off-by: Manjunathappa, Prakash <prakash.pm@ti.com> [nsekhar@ti.com: actually stop using con_id in clk_get(), squash the patch adding OF aux data into this one] Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2013-04-03ARM: davinci: mmc: derive version information from device nameManjunathappa, Prakash1-1/+1
Remove specifying mmc controller IP version information via platform data, instead specify device name so that driver derives it from platform_device_id table. Also change the clock node name to match the changed dev_id. Tested on da850-evm to make sure driver loads without clk_get failures. Signed-off-by: Manjunathappa, Prakash <prakash.pm@ti.com> Reviewed-by: Sekhar Nori <nsekhar@ti.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Chris Ball <cjb@laptop.org> Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2012-11-27video: da8xx-fb: clk_get on connection id fckManjunathappa1-1/+1
do clk_get on connection id "fck" to support OMAP based platforms having multiple clocks for module. Without this driver change clk_get fails on am335x. This patch is based on the discussion in community http://marc.info/?l=linux-kernel&m=135166018907827&w=2 Signed-off-by: Manjunathappa <prakash.pm@ti.com> Cc: Vaibhav Hiremath <hvaibhav@ti.com> Acked-by: Sekhar Nori <nsekhar@ti.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2012-10-05sections: fix section conflicts in arch/arm/Andi Kleen1-24/+24
Signed-off-by: Andi Kleen <ak@linux.intel.com> Cc: Russell King <rmk@arm.linux.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-01-05ARM: 7190/1: restart: davinci: use new restart hookSekhar Nori1-1/+0
Rather than using DaVinci specific davinci_soc_info based restart hook, use the restart hook available in the machine descriptor instead. Tested on DM365 and AM18x EVMs. v2: Changed to use restart hook in machine descriptor per Russell's comment. Signed-off-by: Sekhar Nori <nsekhar@ti.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-08-22ARM: 7040/1: mach-davinci: break out GPIO driver specificsLinus Walleij1-0/+1
The <mach/gpio.h> file is included from upper directories and deal with generic GPIO and gpiolib stuff. Break out the platform and driver specific defines and functions into its own header file. Cc: Sekhar Nori <nsekhar@ti.com> Cc: Kevin Hilman <khilman@ti.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-08-08ARM: gpio: convert includes of mach/gpio.h and asm/gpio.h to linux/gpio.hRussell King1-1/+1
Convert arch/arm includes of mach/gpio.h and asm/gpio.h to linux/gpio.h before we start consolidating the individual platform implementations of the gpio header files. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-03-11davinci: macro rename DA8XX_LPSC0_DMAX to DA8XX_LPSC0_PRUSS.Subhasish Ghosh1-1/+1
DMAX is an internal name for the module which is known as PRUSS in TI public documentation. This patch just gets the code in sync with TI documentation. Signed-off-by: Subhasish Ghosh <subhasish@mistralsolutions.com> Acked-by: Sekhar Nori <nsekhar@ti.com> Signed-off-by: Kevin Hilman <khilman@ti.com>
2011-03-11davinci: da830: fix driver name for spi clocksMichael Williamson1-2/+2
The spi driver name called out for the da830 spi clock list is not correct, fix it. Signed-off-by: Michael Williamson <michael.williamson@criticallink.com> Acked-by: Sekhar Nori <nsekhar@ti.com> Signed-off-by: Kevin Hilman <khilman@ti.com>
2010-08-05davinci: da8xx: sparse cleanup: remove duplicate entries in irq prioritiesSekhar Nori1-5/+0
This patch helps get rid of the following sparse warnings of the type: CHECK arch/arm/mach-davinci/da830.c arch/arm/mach-davinci/da830.c:1026:3: warning: Initializer entry defined twice arch/arm/mach-davinci/da830.c:1027:3: also defined here coming from the irq priorities array init. Apart from one instance of genuinie repetition, most are are instances of multiple #defines of the same interrupt number. I have not removed the multiple definitions from the irq.h file in the hope that someone might decide to use them as shared interrupts at some point of time. The priority initialization however needs to be done only once and hence has been corrected. Signed-off-by: Sekhar Nori <nsekhar@ti.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2010-05-19Merge branch 'davinci-for-linus' of ↵Linus Torvalds1-16/+13
git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-davinci * 'davinci-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-davinci: (48 commits) Revert "rtc: omap: let device wakeup capability be configured from chip init logic" DM365: Added more PINMUX configurations for AEMIF DM365: Make CLKOUTx available DM365: Added PINMUX definitions for GPIO30..32 Davinci: iotable based ioremap() interception Davinci: pinmux - use ioremap() Davinci: aintc/cpintc - use ioremap() Davinci: psc - use ioremap() Davinci: timer - use ioremap() Davinci: jtag_id - use ioremap() Davinci: da8xx: rtc - use ioremap Davinci: gpio - use ioremap() davinci: edma: fix coding style issue related to breaking lines davinci: edma: use BIT() wherever possible davinci: edma: fix coding style issue related to usage of braces davinci: edma: use a more intuitive name for edma_info Davinci: serial - conditional reset via pwremu Davinci: serial - use ioremap() Davinci: serial - remove unnecessary define Davinci: watchdog reset separation across socs ... Fix up trivial conflict in arch/arm/Kconfig due to removal of "select GENERIC_TIME"
2010-05-14DA830: fix USB 2.0 clock entrySergei Shtylyov1-1/+1
DA8xx OHCI driver fails to load due to failing clk_get() call for the USB 2.0 clock. Arrange matching USB 2.0 clock by the clock name instead of the device. (Adding another CLK() entry for "ohci.0" device won't do -- in the future I'll also have to enable USB 2.0 clock to configure CPPI 4.1 module, in which case I won't have any device at all.) Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2010-05-13Davinci: iotable based ioremap() interceptionCyril Chemparathy1-4/+3
This patch allows for a more flexible ioremap() interception based on iotable contents. With this patch, the ioremap() interception code can properly translate addresses only after davinci_soc_info has been initialized. Consequently, in soc-specific init functions, davinci_common_init() has to happen before any ioremap() attempts. The da8xx init sequence has been suitably modified to meet this restriction. Signed-off-by: Cyril Chemparathy <cyril@ti.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2010-05-13Davinci: pinmux - use ioremap()Cyril Chemparathy1-2/+1
This patch modifies the pinmux implementation so as to ioremap() the pinmux register area on first use. Signed-off-by: Cyril Chemparathy <cyril@ti.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2010-05-13Davinci: aintc/cpintc - use ioremap()Cyril Chemparathy1-1/+1
This patch implements the following: - interrupt initialization uses ioremap() instead of passing a virtual address via davinci_soc_info. - machine definitions directly point to cp_intc_init() or davinci_irq_init() - davinci_intc_type and davinci_intc_base now get initialized in controller specific init functions instead of davinci_common_init() - minor fix in davinci_irq_init() to use intc_irq_num instead of DAVINCI_N_AINTC_IRQ Signed-off-by: Cyril Chemparathy <cyril@ti.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2010-05-13Davinci: psc - use ioremap()Cyril Chemparathy1-4/+1
This patch modifies the psc and clock control code to use ioremap()ed registers. Signed-off-by: Cyril Chemparathy <cyril@ti.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2010-05-13Davinci: timer - use ioremap()Cyril Chemparathy1-2/+2
This patch eliminates IO_ADDRESS() usage for Davinci timer definitions. The timer code has correspondingly been modified to ioremap() MMRs instead. Signed-off-by: Cyril Chemparathy <cyril@ti.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
generated by cgit v1.2.3 (git 2.39.0) at 2024-08-06 12:24:45 +0300