Age | Commit message (Collapse) | Author | Files | Lines |
|
Several includes are not needed, so drop them.
of_platform.h (for now) implicitly includes platform_device.h and of.h, so
add explicit includes of those as needed.
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Ethernet refclock direction is board specific and should be configurable
by devicetree. In fact there are board not working with this defaults,
which will be fixed by separate patch.
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
imx6ulz is derived SoC from imx6ull.
Currently, the boards based on imx6ulz are correctly recognized only if
the compatible includes "fsl,imx6ull", while "fsl,imx6ulz" is ignored.
Signed-off-by: Pierluigi Passaro <pierluigi.p@variscite.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Add the print of the CPU type and SOC revision during boot.
Signed-off-by: Stefan Riedmueller <s.riedmueller@phytec.de>
Signed-off-by: Robert Karszniewicz <r.karszniewicz@phytec.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Remove board specific PHY fixup introduced by commit:
| 709bc0657fe6f9f5 ("ARM: imx6ul: add fec MAC refrence clock and phy fixup init")
This fixup addresses boards with a specific configuration: a KSZ8081RNA
PHY with attached clock source to XI (Pin 8) of the PHY equal to 50MHz.
For the KSZ8081RND PHY, the meaning of the reg 0x1F bit 7 is different
(compared to the KSZ8081RNA). A set bit means:
- KSZ8081RNA: clock input to XI (Pin 8) is 50MHz for RMII
- KSZ8081RND: clock input to XI (Pin 8) is 25MHz for RMII
In other configurations, for example a KSZ8081RND PHY or a KSZ8081RNA
with 25Mhz clock source, the PHY will glitch and stay in not recoverable
state.
It is not possible to detect the clock source frequency of the PHY. And
it is not possible to automatically detect KSZ8081 PHY variant - both
have same PHY ID. It is not possible to overwrite the fixup
configuration by providing proper device tree description. The only way
is to remove this fixup.
If this patch breaks network functionality on your board, fix it by
adding PHY node with following properties:
ethernet-phy@x {
...
micrel,led-mode = <1>;
clocks = <&clks IMX6UL_CLK_ENET_REF>;
clock-names = "rmii-ref";
...
};
The board which was referred in the initial patch is already fixed.
See: arch/arm/boot/dts/imx6ul-14x14-evk.dtsi
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Tested-by: Sébastien Szymanski <sebastien.szymanski@armadeus.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
This is preparation to move imx_soc_device_init to drivers/soc/imx/
There is no reason to must put dt devices under /sys/devices/soc0,
they could also be under /sys/devices/platform, so we could
pass NULL as parent when calling of_platform_default_populate.
Following soc-imx8.c soc-imx-scu.c using device_initcall, need
to change return type to int type for imx_soc_device_init.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Remove unnecessary blank lines for cleanup.
Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Based on 2 normalized pattern(s):
this program is free software you can redistribute it and or modify
it under the terms of the gnu general public license version 2 as
published by the free software foundation
this program is free software you can redistribute it and or modify
it under the terms of the gnu general public license version 2 as
published by the free software foundation #
extracted by the scancode license scanner the SPDX license identifier
GPL-2.0-only
has been chosen to replace the boilerplate/reference in 4122 file(s).
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Enrico Weigelt <info@metux.net>
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Allison Randal <allison@lohutok.net>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190604081206.933168790@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
imx6ull is derived SoC from imx6ul.
Signed-off-by: Peter Chen <peter.chen@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM SoC platform updates from Arnd Bergmann:
"These are updates for platform specific code on 32-bit ARM machines,
essentially anything that can not (yet) be expressed using DT files.
Noteworthy changes include:
- We get support for running in big-endian mode on two platforms:
sunxi (Allwinner) and s3c24xx (old Samsung).
- The recently added Uniphier platform now uses standard PSCI methods
for SMP booting and we remove support for old bootloader versions
that did not support it yet.
- In sunxi, we gain support for the "Nextthing GR8" SoC, which is a
close relative of the Allwinner A13 and R8 chips.
- PXA completes its move over to the generic dmaengine framework and
removes its old private API
- mach-bcm gains support for BCM47189/BCM53573, their first ARM SoC
with integrated 802.11ac wireless networking"
* tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (54 commits)
ARM: imx legacy: pca100: move peripheral initialization to .init_late
ARM: imx legacy: mx27ads: move peripheral initialization to .init_late
ARM: imx legacy: mx21ads: move peripheral initialization to .init_late
ARM: imx legacy: pcm043: move peripheral initialization to .init_late
ARM: imx legacy: mx35-3ds: move peripheral initialization to .init_late
ARM: imx legacy: mx27-3ds: move peripheral initialization to .init_late
ARM: imx legacy: imx27-visstrim-m10: move peripheral initialization to .init_late
ARM: imx legacy: vpr200: move peripheral initialization to .init_late
ARM: imx legacy: mx31moboard: move peripheral initialization to .init_late
ARM: imx legacy: armadillo5x0: move peripheral initialization to .init_late
ARM: imx legacy: qong: move peripheral initialization to .init_late
ARM: imx legacy: mx31-3ds: move peripheral initialization to .init_late
ARM: imx legacy: pcm037: move peripheral initialization to .init_late
ARM: imx legacy: mx31lilly: move peripheral initialization to .init_late
ARM: imx legacy: mx31ads: move peripheral initialization to .init_late
ARM: imx legacy: mx31lite: move peripheral initialization to .init_late
ARM: imx legacy: kzm: move peripheral initialization to .init_late
MAINTAINERS: update list of Oxnas maintainers
ARM: orion5x: remove extraneous NO_IRQ
ARM: orion: simplify orion_ge00_switch_init
...
|
|
This patch enables cpuidle driver for i.MX6UL, it
reuses i.MX6SX's cpuidle driver, 3 levels of cpuidle
supported:
1. ARM WFI;
2. SOC in WAIT mode;
3. SOC in WAIT mode + ARM power off.
As i.MX6UL has cortex-A7 CORE with an internal L2
cache, so flushing it before powering down ARM platform
is necessary, flush_cache_all() in last step of cpu_suspend
has very small overhead, just call it to avoid cache
type check for different platforms.
Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
At imx6ul_init_machine, it calls imx6ul_pm_init which needs to find
platform device for ocram, but the default populate platform device is at
of_platform_default_populate_init, which is located at arch_initcall_sync,
and called later than arch_initcall (.init_machine is located at that).
So below warning message will be showed during boots up:
imx6q_suspend_init: failed to find ocram device!
imx6_pm_common_init: No DDR LPM support with suspend -19!
Due to lack of ocram device, the suspend mode "mem" which needs ocram to
store suspend routine code is invalid.
This commit populates platform device before imx6ul_pm_init like other
imx6 platforms do, and the suspend mode "mem" can work successfully.
Signed-off-by: Peter Chen <peter.chen@nxp.com>
Fixes: 850bea2335e4 ("arm: Remove unnecessary of_platform_populate with default match table")
Cc: Anson Huang <anson.huang@nxp.com>
Cc: Fabio Estevam <fabio.estevam@nxp.com>
Cc: Kefeng Wang <wangkefeng.wang@huawei.com>
Cc: Rob Herring <robh@kernel.org>
Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux
Pull DeviceTree updates from Rob Herring:
- remove most of_platform_populate() calls in arch code. Now the DT
core code calls it in the default case and platforms only need to
call it if they have special needs
- use pr_fmt on all the DT core print statements
- CoreSight binding doc improvements to block name descriptions
- add dt_to_config script which can parse dts files and list
corresponding kernel config options
- fix memory leak hit with a PowerMac DT
- correct a bunch of STMicro compatible strings to use the correct
vendor prefix
- fix DA9052 PMIC binding doc to match what is actually used in dts
files
* tag 'devicetree-for-4.8' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (35 commits)
documentation: da9052: Update regulator bindings names to match DA9052/53 DTS expectations
xtensa: Partially Revert "xtensa: Remove unnecessary of_platform_populate with default match table"
xtensa: Fix build error due to missing include file
MIPS: ath79: Add missing include file
Fix spelling errors in Documentation/devicetree
ARM: dts: fix STMicroelectronics compatible strings
powerpc/dts: fix STMicroelectronics compatible strings
Documentation: dt: i2c: use correct STMicroelectronics vendor prefix
scripts/dtc: dt_to_config - kernel config options for a devicetree
of: fdt: mark unflattened tree as detached
of: overlay: add resolver error prints
coresight: document binding acronyms
Documentation/devicetree: document cavium-pip rx-delay/tx-delay properties
of: use pr_fmt prefix for all console printing
of/irq: Mark initialised interrupt controllers as populated
of: fix memory leak related to safe_name()
Revert "of/platform: export of_default_bus_match_table"
of: unittest: use of_platform_default_populate() to populate default bus
memory: omap-gpmc: use of_platform_default_populate() to populate default bus
bus: uniphier-system-bus: use of_platform_default_populate() to populate default bus
...
|
|
After patch "of/platform: Add common method to populate default bus",
it is possible for arch code to remove unnecessary callers of
of_platform_populate with default match table.
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Cc: Nicolas Ferre <nicolas.ferre@atmel.com>
Cc: Ray Jui <rjui@broadcom.com>
Cc: Lee Jones <lee@kernel.org>
Cc: Krzysztof Halasa <khalasa@piap.pl>
Cc: Kukjin Kim <kgene@kernel.org>
Cc: Rob Herring <robh@kernel.org>
Cc: Shawn Guo <shawnguo@kernel.org>
Cc: Santosh Shilimkar <ssantosh@kernel.org>
Cc: Roland Stigge <stigge@antcom.de>
Cc: Jason Cooper <jason@lakedaemon.net>
Cc: Haojian Zhuang <haojian.zhuang@gmail.com>
Cc: Heiko Stuebner <heiko@sntech.de>
Cc: Viresh Kumar <vireshk@kernel.org>
Cc: Shiraz Hashim <shiraz.linux.kernel@gmail.com>
Cc: Tony Prisk <linux@prisktech.co.nz>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Russell King <linux@arm.linux.org.uk>
Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Signed-off-by: Rob Herring <robh@kernel.org>
|
|
The value used for Micrel PHY mask is not correct. Use the
MICREL_PHY_ID_MASK definition instead.
Thanks to Jiri Luznicky for proposing the fix at
https://community.freescale.com/thread/387739
Cc: <stable@vger.kernel.org>
Fixes: 709bc0657fe6f9f55 ("ARM: imx6ul: add fec MAC refrence clock and phy fixup init")
Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Both the pointer array and the pointed data have to be const when using
__initconst to be correct. This also fixes LTO builds that otherwise
fail with section mismatch errors.
Signed-off-by: Nicolas Pitre <nico@linaro.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Add cpufreq device for i.MX6UL. Using the common
cpufreq of i.MX6 SOC.
Signed-off-by: Bai Ping <b51503@freescale.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
This patch adds suspend function for i.MX6UL, it supports
"standby" and "mem" mode, for "standby" mode, SoC will
enter STOP mode only, while for "mem" mode, SoC will
enter STOP mode and DDR IO will be set to low power
mode.
As i.MX6UL contains a "Cortex-A7" ARM core which has no
PL310, so we need to avoid any PL310 operations during
suspend/resume, also, we need to flush Cortex-A7's inernal
L2 cache before suspend.
Signed-off-by: Anson Huang <b20788@freescale.com>
|
|
We should call phy_register_fixup_for_uid() only when CONFIG_PHYLIB
is built-in, otherwise we get the following link error when building
allmodconfig:
arch/arm/mach-imx/built-in.o: In function `imx6ul_init_machine':
:(.init.text+0xa714): undefined reference to `phy_register_fixup_for_uid'
This is the same approach done in mach-imx6q.c and mach-imx6sx.c.
Reported-by: Olof Johansson <olof@lixom.net>
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Acked-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Olof Johansson <olof@lixom.net>
|
|
Add FEC MAC refrence clock init.
Add phy fixup init for i.MX6ul 14x14 evk board that installs KSZ8081 phy.
For the phy, there needs extra phy fixup for MII and RMII mode.
Signed-off-by: Fugang Duan <b38611@freescale.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
i.MX6UL is a new SOC, add MSL support
Signed-off-by: Frank Li <Frank.Li@freescale.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|