summaryrefslogtreecommitdiff
path: root/arch/arm/mach-mmp/Kconfig
AgeCommit message (Collapse)AuthorFilesLines
2023-03-20ARM: mmp: remove obsolete config USB_EHCI_MV_U2OLukas Bulwahn1-6/+0
Commit 77acc85ce797 ("ARM: mmp: remove device definitions") and commit 06f11dfb5b75 ("ARM: mmp: remove all board files") remove mach-mmp's device definitions and the board file for the Marvell PXA910-based TTC_DKB Development Platform. With that removal, all references to the config USB_EHCI_MV_U2O are gone. The config has no remaining effect and can be deleted. Remove the obsolete config USB_EHCI_MV_U2O. Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2023-01-16ARM: mmp: remove old PM supportArnd Bergmann1-3/+0
Assuming that we don't actually want the old-style pm-mmp2.c and pm-pxa910.c implementation, all these files can go away as well. Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2023-01-16ARM: mmp: remove all board filesArnd Bergmann1-96/+0
The old-style board files were marked as 'unused' a while ago and can now be removed for good, leaving only devicetree based boot support. Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2023-01-16ARM: mmp: select specific CPU implementationArnd Bergmann1-0/+3
The behavior of the MMP platform code depends on whether the CPU_PXA168/CPU_PXA910/CPU_MMP2 symbols are enabled or not. I believe the intention here was that these can be left disabled for a pure DT-only build, but it's not clear if that actually works. At the minimum, the cpu_is_pxa168() and cpu_is_pxa910() checks behave differently, which causes changes in the power management code. For the moment, make the behavior depend on whether CONFIG_ATAGS is set or not, to make it easier to bisect the removal of the old code later. Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2022-07-22ARM: mmp: mark all board files for removalArnd Bergmann1-0/+9
The mmp platform supports both ATAGS based board files and DT booting, but it appears that nobody has been interested in board files for a long time. Mark all of them for removal in early 2023 with a dependency on CONFIG_UNUSED_BOARD_FILES, leaving only the DT support for the future, unless someone pops up who uses them. Cc: Lubomir Rintel <lkundrak@v3.sk> Cc: Haojian Zhuang <haojian.zhuang@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2022-06-03Merge tag 'arm-multiplatform-5.19-2' of ↵Linus Torvalds1-9/+1
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull more ARM multiplatform updates from Arnd Bergmann: "The second part of the multiplatform changes now converts the Intel/Marvell PXA platform along with the rest. The patches went through several rebases before the merge window as bugs were found, so they remained separate. This has to touch a lot of drivers, in particular the touchscreen, pcmcia, sound and clk bits, to detach the driver files from the platform and board specific header files" * tag 'arm-multiplatform-5.19-2' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (48 commits) ARM: pxa/mmp: remove traces of plat-pxa ARM: pxa: convert to multiplatform ARM: pxa/sa1100: move I/O space to PCI_IOBASE ARM: pxa: remove support for MTD_XIP ARM: pxa: move mach/*.h to mach-pxa/ ARM: PXA: fix multi-cpu build of xsc3 ARM: pxa: move plat-pxa to drivers/soc/ ARM: mmp: rename pxa_register_device ARM: mmp: remove tavorevb board support ARM: pxa: remove unused mach/bitfield.h ARM: pxa: move clk register definitions to driver ARM: pxa: move smemc register access from clk to platform cpufreq: pxa3: move clk register access to clk driver ARM: pxa: remove get_clk_frequency_khz() ARM: pxa: pcmcia: move smemc configuration back to arch ASoC: pxa: i2s: use normal MMIO accessors ASoC: pxa: ac97: use normal MMIO accessors ASoC: pxa: use pdev resource for FIFO regs Input: wm97xx - get rid of irq_enable method in wm97xx_mach_ops Input: wm97xx - switch to using threaded IRQ ...
2022-05-07ARM: mmp: remove tavorevb board supportArnd Bergmann1-9/+1
There are two tavorevb boards in the kernel, one using a PXA930 chip in mach-pxa, and one using the later PXA910 chip in mach-mmp. They use the same board number, which is generally a bad idea, and in a multiplatform kernel, we can end up with funny link errors like this one resulting from two boards gettting controlled by the same Kconfig symbol: arch/arm/mach-mmp/tavorevb.o: In function `tavorevb_init': tavorevb.c:(.init.text+0x4c): undefined reference to `pxa910_device_uart1' tavorevb.c:(.init.text+0x50): undefined reference to `pxa910_device_gpio' tavorevb.o:(.arch.info.init+0x54): undefined reference to `pxa910_init_irq' tavorevb.o:(.arch.info.init+0x58): undefined reference to `pxa910_timer_init' The mach-pxa TavorEVB seems much more complete than the mach-mmp one that supports only uart, gpio and ethernet. Further, I could find no information about the board on the internet aside from references to the Linux kernel, so I assume this was never available outside of Marvell and can be removed entirely. There is a third board named TavorEVB in the Kconfig description, but this refers to the "TTC_DKB" machine. The two are clearly related, so I change the Kconfig description to just list both names. Cc: Lubomir Rintel <lkundrak@v3.sk> Reviewed-by: Lubomir Rintel <lkundrak@v3.sk> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2022-04-08ARM: rework endianess selectionArnd Bergmann1-1/+1
Choosing big-endian vs little-endian kernels in Kconfig has not worked correctly since the introduction of CONFIG_ARCH_MULTIPLATFORM a long time ago. The problems is that CONFIG_BIG_ENDIAN depends on ARCH_SUPPORTS_BIG_ENDIAN, which can set by any one platform in the config, but would actually have to be supported by all of them. This was mostly ok for ARMv6/ARMv7 builds, since these are BE8 and tend to just work aside from problems in nonportable device drivers. For ARMv4/v5 machines, CONFIG_BIG_ENDIAN and CONFIG_ARCH_MULTIPLATFORM were never set together, so this was disabled on all those machines except for IXP4xx. As IXP4xx can now become part of ARCH_MULTIPLATFORM, it seems better to formalize this logic: all ARMv4/v5 platforms get an explicit dependency on being either big-endian (ixp4xx) or little-endian (the rest). We may want to fix ixp4xx in the future to support both, but it does not work in LE mode at the moment. For the ARMv6/v7 platforms, there are two ways this could be handled a) allow both modes only for platforms selecting 'ARCH_SUPPORTS_BIG_ENDIAN' today, but only LE mode for the others, given that these were added intentionally at some point. b) allow both modes everwhere, given that it was already possible to build that way by e.g. selecting ARCH_VIRT, and that the list is not an accurate reflection of which platforms may or may not work. Out of these, I picked b) because it seemed slighly more logical to me. Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-06-01Merge branches 'clk-mmp', 'clk-intel', 'clk-ingenic', 'clk-qcom' and ↵Stephen Boyd1-0/+2
'clk-silabs' into clk-next - Start making audio and GPU clks work on Marvell MMP2/MMP3 SoCs - Add support for X1830 and X1000 Ingenic SoC clk controllers - Add support for Qualcomm's MSM8939 Generic Clock Controller - Add some GPU, NPU, and UFS clks to Qualcomm SM8150 driver - Enable supply regulators for GPU gdscs on Qualcomm SoCs - Add support for Si5342, Si5344 and Si5345 chips * clk-mmp: clk: mmp2: Add audio clock controller driver dt-bindings: clock: Add Marvell MMP Audio Clock Controller binding clk: mmp2: Add support for power islands dt-bindings: marvell,mmp2: Add ids for the power domains dt-bindings: clock: Make marvell,mmp2-clock a power controller clk: mmp2: Add the audio clock clk: mmp2: Add the I2S clocks clk: mmp2: Rename mmp2_pll_init() to mmp2_main_clk_init() clk: mmp2: Move thermal register defines up a bit dt-bindings: marvell,mmp2: Add clock id for the Audio clock dt-bindings: marvell,mmp2: Add clock id for the I2S clocks clk: mmp: frac: Allow setting bits other than the numerator/denominator clk: mmp: frac: Do not lose last 4 digits of precision * clk-intel: clk: intel: remove redundant initialization of variable rate64 clk: intel: Add CGU clock driver for a new SoC dt-bindings: clk: intel: Add bindings document & header file for CGU * clk-ingenic: clk: ingenic: Mark ingenic_tcu_of_match as __maybe_unused clk: X1000: Add FIXDIV for SSI clock of X1000. dt-bindings: clock: Add and reorder ABI for X1000. clk: Ingenic: Add CGU driver for X1830. dt-bindings: clock: Add X1830 clock bindings. clk: Ingenic: Adjust cgu code to make it compatible with X1830. clk: Ingenic: Remove unnecessary spinlock when reading registers. * clk-qcom: clk: qcom: Add missing msm8998 ufs_unipro_core_clk_src dt-bindings: clock: Add YAML schemas for QCOM A53 PLL clk: qcom: gcc-msm8939: Add MSM8939 Generic Clock Controller clk: qcom: gcc: Add support for Secure control source clock dt-bindings: clock: Add gcc_sec_ctrl_clk_src clock ID clk: qcom: gcc: Add support for a new frequency for SC7180 clk: qcom: Add DT bindings for MSM8939 GCC clk: qcom: gcc: Add missing UFS clocks for SM8150 clk: qcom: gcc: Add GPU and NPU clocks for SM8150 clk: qcom: mmcc-msm8996: Properly describe GPU_GX gdsc clk: qcom: gdsc: Handle GDSC regulator supplies clk: qcom: msm8916: Fix the address location of pll->config_reg * clk-silabs: clk: clk-si5341: Add support for the Si5345 series
2020-05-28clk: mmp2: Add support for power islandsLubomir Rintel1-0/+2
Apart from the clocks and resets, the PMU hardware also controls power to peripherals that are on separate power islands. On MMP2, that's the GC860 GPU and the SSPA audio interface, while on MMP3 also the camera interface is on a separate island, along with the pair of GC2000 and GC300 GPUs and the SSPA. Signed-off-by: Lubomir Rintel <lkundrak@v3.sk> Link: https://lkml.kernel.org/r/20200519224151.2074597-12-lkundrak@v3.sk Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-05-05ARM: Remove redundant COMMON_CLK selectsStephen Boyd1-1/+0
The mulitplatform config already selects COMMON_CLK, so selecting it again is not useful. Remove these selects from ARM platforms that are part of the multiplatform build. Reviewed-by: "Andreas Färber" <afaerber@suse.de> # actions Acked-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> # actions Cc: Russell King <linux@armlinux.org.uk> Cc: Alexander Shiyan <shc_work@mail.ru> Cc: Lubomir Rintel <lkundrak@v3.sk> Cc: <linux-arm-kernel@lists.infradead.org> Cc: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Stephen Boyd <sboyd@kernel.org> Reviewed-by: Arnd Bergmann <arnd@arndb.de> Link: https://lkml.kernel.org/r/20200409064416.83340-2-sboyd@kernel.org
2019-10-17ARM: mmp: add support for MMP3 SoCLubomir Rintel1-2/+20
Similar to MMP2, which this patch is based on. Known differencies from MMP2 are: * Two PJ4B cores instead of one PJ4 * Tauros 3 L2 cache controller instead of Tauros 2 * A GIC interrupt controller optionally used instead of the MMP one * A TWD local timer * Different USB2 PHY * A USB3 SS controller * More interrupt muxes Hard to tell what else is different, because documentation is not available. Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
2019-05-21treewide: Add SPDX license identifier - Makefile/KconfigThomas Gleixner1-0/+1
Add SPDX license identifiers to all Make/Kconfig files which: - Have no license information of any form These files fall under the project license, GPL v2 only. The resulting SPDX license identifier is: GPL-2.0-only Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-06-03ARM: do away with ARCH_[WANT_OPTIONAL|REQUIRE]_GPIOLIBLinus Walleij1-1/+1
This replaces: - "select ARCH_REQUIRE_GPIOLIB" with "select GPIOLIB" as this can now be selected directly. - "select ARCH_WANT_OPTIONAL_GPIOLIB" with no dependency: GPIOLIB is now selectable by everyone, so we need not declare our intent to select it. When ordering the symbols the following rationale was used: if the selects were in alphabetical order, I moved select GPIOLIB to be in alphabetical order, but if the selects were not maintained in alphabetical order, I just replaced "select ARCH_REQUIRE_GPIOLIB" with "select GPIOLIB". Cc: Michael Büsch <m@bues.ch> Cc: arm@kernel.org Cc: linux-arm-kernel@lists.infradead.org Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Olof Johansson <olof@lixom.net>
2015-12-01ARM: mmp: move into ARCH_MULTIPLATFORMArnd Bergmann1-8/+26
With all dependencies taken care of, this enables building the Marvell mmp platform as part of ARCH_MULTIPLATFORM, along with other ARMv5 and ARMv7 platforms. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Andrew Lunn <andrew@lunn.ch>
2014-11-13arm: mmp: Make use of the DT supported clockChao Xie1-6/+6
Change the dtsi and dts file, soc initialization code to make use of DT support clock. So now in the code we do only need call of_clk_init to initialize the clocks. Signed-off-by: Chao Xie <chao.xie@marvell.com> Acked-by: Haojian Zhuang <haojian.zhuang@gmail.com> Signed-off-by: Michael Turquette <mturquette@linaro.org>
2013-12-12ARM: mmp: build sram driver aloneQiao Zhou1-0/+3
sram driver can be used by many chips besides CPU_MMP2, and so build it alone. Also need to select MMP_SRAM for MMP_TDMA driver. Reported-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: Qiao Zhou <zhouqiao@marvell.com> Signed-off-by: Haojian Zhuang <haojian.zhuang@gmail.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2012-11-21ARM: mmp: select pinctrl driverHaojian Zhuang1-0/+4
Pinctrl driver is necessary for MMP DT & MMP2 DT platforms. Signed-off-by: Haojian Zhuang <haojian.zhuang@gmail.com> Acked-by: Linus Walleij <linus.walleij@linaro.org>
2012-10-13ARM: config: sort select statements alphanumericallyRussell King1-3/+3
As suggested by Andrew Morton: This is a pet peeve of mine. Any time there's a long list of items (header file inclusions, kconfig entries, array initalisers, etc) and someone wants to add a new item, they *always* go and stick it at the end of the list. Guys, don't do this. Either put the new item into a randomly-chosen position or, probably better, alphanumerically sort the list. lets sort all our select statements alphanumerically. This commit was created by the following perl: while (<>) { while (/\\\s*$/) { $_ .= <>; } undef %selects if /^\s*config\s+/; if (/^\s+select\s+(\w+).*/) { if (defined($selects{$1})) { if ($selects{$1} eq $_) { print STDERR "Warning: removing duplicated $1 entry\n"; } else { print STDERR "Error: $1 differently selected\n". "\tOld: $selects{$1}\n". "\tNew: $_\n"; exit 1; } } $selects{$1} = $_; next; } if (%selects and (/^\s*$/ or /^\s+help/ or /^\s+---help---/ or /^endif/ or /^endchoice/)) { foreach $k (sort (keys %selects)) { print "$selects{$k}"; } undef %selects; } print; } if (%selects) { foreach $k (sort (keys %selects)) { print "$selects{$k}"; } } It found two duplicates: Warning: removing duplicated S5P_SETUP_MIPIPHY entry Warning: removing duplicated HARDIRQS_SW_RESEND entry and they are identical duplicates, hence the shrinkage in the diffstat of two lines. We have four testers reporting success of this change (Tony, Stephen, Linus and Sekhar.) Acked-by: Jason Cooper <jason@lakedaemon.net> Acked-by: Tony Lindgren <tony@atomide.com> Acked-by: Stephen Warren <swarren@nvidia.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Sekhar Nori <nsekhar@ti.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-08-29arm: mmp: make all SOCs use common clock by defaultChao Xie1-0/+3
Signed-off-by: Chao Xie <xiechao.mail@gmail.com> Reviewed-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Haojian Zhuang <haojian.zhuang@gmail.com> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2012-05-23Merge tag 'boards' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-socLinus Torvalds1-0/+7
Pull arm-soc board specific changes from Olof Johansson: "While we generally attempt to get rid of board specific files and replace them with device tree based descriptions, a lot of platforms have not come that far: In shmobile, we add two new board files because their recently started effort to add DT support has not proceeded enough to use it for all of the important hardware. In Kirkwood, we are adding support for new boards with a combination of DT and board file contents in multiple cases. pxa/mmp and imx are extending support for existing board files but not adding new ones." Fix up trivial conflicts in arch/arm/mach-{mmp/ttc_dkb.c,shmobile/{Kconfig,Makefile}} * tag 'boards' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (94 commits) ARM: shmobile: fix smp build ARM: kirkwood: Add support for RaidSonic IB-NAS6210/6220 using devicetree kirkwood: Add iconnect support orion/kirkwood: create a generic function for gpio led blinking kirkwood/orion: fix orion_gpio_set_blink ARM: kirkwood: Define DNS-320/DNS-325 NAND in fdt kirkwood: Allow nand to be configured via. devicetree mtd: Add orion_nand devicetree bindings ARM: kirkwood: Basic support for DNS-320 and DNS-325 ARM: mach-shmobile: Use DT_MACHINE for armadillo 800 eva ARM: mach-shmobile: Use DT_MACHINE for KZM9G ARM: pxa: hx4700: Add Synaptics NavPoint touchpad ARM: pxa: Use REGULATOR_SUPPLY macro ARM: mach-shmobile: kzm9g: enable SMP boot ARM: mach-shmobile: kzm9g: defconfig update ARM: mach-shmobile: kzm9g: add PCF8757 gpio-key ARM: mach-shmobile: kzm9g: add SDHI support ARM: mach-shmobile: kzm9g: add MMCIF support ARM: mach-shmobile: kzm9g: correct screen direction ARM: mach-shmobile: sh73a0.h: add GPIO_NR ...
2012-05-05ARM: mmp: append CONFIG_MACH_MMP2_DTHaojian Zhuang1-10/+19
Append CONFIG_MACH_MMP2_DT. CONFIG_MACH_MMP_DT is used to ARMv5 DT support. CONFIG_MACH_MMP2_DT is used to ARMv7 DT support. These two machine support can't be selected at the same time. Signed-off-by: Haojian Zhuang <haojian.zhuang@gmail.com> Acked-by: Arnd Bergmann <arnd@arndb.de>
2012-05-03ARM: mmp: add usb device support for PXA910Neil Zhang1-0/+7
Add usb device support for Marvell PXA910. Actually PXA920 will use the same device. Signed-off-by: Neil Zhang <zhangwm@marvell.com> Signed-off-by: Haojian Zhuang <haojian.zhuang@gmail.com>
2012-03-07ARM: mmp: append OF support on pxa168Haojian Zhuang1-0/+10
Enable PXA168 and aspenite support. Signed-off-by: Haojian Zhuang <haojian.zhuang@marvell.com> Acked-by: Arnd Bergmann <arnd@arndb.de>
2011-10-25ARM: mmp: rename SHEEVAD to GPLUGDEric Miao1-1/+1
GuruPlugD was initially named to be SHEEVAD, and it's causing naming confusion in the mach-types database. Make it consistent by renaming to GPLUGD. Reported-and-Acked-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Tanmay Upadhyay <tanmay.upadhyay@einfochips.com> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2011-07-12ARM: pxa168: Add board support for gplugDTanmay Upadhyay1-0/+7
Tested UART console, Ethernet & I2C interfaces Signed-off-by: Tanmay Upadhyay <tanmay.upadhyay@einfochips.com> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2010-12-18ARM: mmp: select CPU_PJ4Haojian Zhuang1-3/+4
Since CPU_PJ4 is shared between PXA95x and MMP2, select CPU_PJ4 in MMP2 configuration. Signed-off-by: Haojian Zhuang <haojian.zhuang@marvell.com> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2010-12-16ARM: mmp: fix the typo - MMP2 is compatible with ARMv7Haojian Zhuang1-2/+2
Signed-off-by: Haojian Zhuang <haojian.zhuang@marvell.com> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2010-12-16ARM: mmp: append brownstone supportHaojian Zhuang1-0/+11
Signed-off-by: Haojian Zhuang <haojian.zhuang@marvell.com> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2010-10-09ARM: pxa168: added support for Teton BGA platformMark F. Brown1-0/+7
Added board defintion, header, and debug UART support. Signed-off-by: Mark F. Brown <mark.brown314@gmail.com> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2010-03-02[ARM] mmp: support jasper development boardHaojian Zhuang1-0/+10
Signed-off-by: Haojian Zhuang <haojian.zhuang@marvell.com> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2010-03-02[ARM] mmp: add support for Marvell MMP2Haojian Zhuang1-1/+17
Marvell MMP2 (aka ARMADA610) is a SoC based on PJ4 core. It's ARMv6 compatible. Support basic interrupt handler and timer, and basic support for MMP2 based FLINT platform. Signed-off-by: Haojian Zhuang <haojian.zhuang@marvell.com> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2010-03-02[ARM] mmp: avengers lite (pxa168) board bring upHaojian Zhuang1-0/+7
Signed-off-by: Gavin Gu <gavin.gu@marvell.com> Signed-off-by: Jing Xiang <jxiang@marvell.com> Signed-off-by: Jack Ren <jack.ren@marvell.com> Signed-off-by: Haojian Zhuang <haojian.zhuang@marvell.com> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2009-03-23[ARM] pxa: add base support for pxa910-based TTC_DKBEric Miao1-0/+7
Signed-off-by: Bin Yang <bin.yang@marvell.com> Signed-off-by: Eric Miao <eric.miao@marvell.com>
2009-03-23[ARM] pxa: add base support for pxa910-based TavorEVBEric Miao1-0/+7
Signed-off-by: Bin Yang <bin.yang@marvell.com> Signed-off-by: Eric Miao <eric.miao@marvell.com>
2009-03-23[ARM] pxa: add base support for Marvell PXA910Eric Miao1-1/+7
Signed-off-by: Bin Yang <bin.yang@marvell.com> Signed-off-by: Eric Miao <eric.miao@marvell.com>
2009-03-23[ARM] pxa: add base support for Marvell's PXA168 processor lineEric Miao1-0/+27
"""The Marvell® PXA168 processor is the first in a family of application processors targeted at mass market opportunities in computing and consumer devices. It balances high computing and multimedia performance with low power consumption to support extended battery life, and includes a wealth of integrated peripherals to reduce overall BOM cost .... """ See http://www.marvell.com/featured/pxa168.jsp for more information. 1. Marvell Mohawk core is a hybrid of xscale3 and its own ARM core, there are many enhancements like instructions for flushing the whole D-cache, and so on 2. Clock reuses Russell's common clkdev, and added the basic support for UART1/2. 3. Devices are a bit different from the 'mach-pxa' way, the platform devices are now dynamically allocated only when necessary (i.e. when pxa_register_device() is called). Description for each device are stored in an array of 'struct pxa_device_desc'. Now that: a. this array of device description is marked with __initdata and can be freed up system is fully up b. which means board code has to add all needed devices early in his initializing function c. platform specific data can now be marked as __initdata since they are allocated and copied by platform_device_add_data() 4. only the basic UART1/2/3 are added, more devices will come later. Signed-off-by: Jason Chagas <chagas@marvell.com> Signed-off-by: Eric Miao <eric.miao@marvell.com>