summaryrefslogtreecommitdiff
path: root/arch/arm/mach-nspire
AgeCommit message (Collapse)AuthorFilesLines
2022-08-18ARM: Kconfig: clean up platform selectionArnd Bergmann1-1/+1
The top-level platform selection is mostly meaningless these days after almost everything is sorted below the CONFIG_ARCH_MULTIPLATFORM, with the only exception being the 20+ year old StrongARM based machines. Make this more consistent by removing the entire choice statement and moving the StrongARM specific options into regular platform specific Kconfig files. The three platforms (footbridge, rpc and sa1100) are still mutually exclusive and cannot coexist with other ARMv4/v5 machines, but since there are only three of them and we will not add more, this can be expressed using Kconfig 'depends on' statements. Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2022-04-08ARM: rework endianess selectionArnd Bergmann1-0/+1
Choosing big-endian vs little-endian kernels in Kconfig has not worked correctly since the introduction of CONFIG_ARCH_MULTIPLATFORM a long time ago. The problems is that CONFIG_BIG_ENDIAN depends on ARCH_SUPPORTS_BIG_ENDIAN, which can set by any one platform in the config, but would actually have to be supported by all of them. This was mostly ok for ARMv6/ARMv7 builds, since these are BE8 and tend to just work aside from problems in nonportable device drivers. For ARMv4/v5 machines, CONFIG_BIG_ENDIAN and CONFIG_ARCH_MULTIPLATFORM were never set together, so this was disabled on all those machines except for IXP4xx. As IXP4xx can now become part of ARCH_MULTIPLATFORM, it seems better to formalize this logic: all ARMv4/v5 platforms get an explicit dependency on being either big-endian (ixp4xx) or little-endian (the rest). We may want to fix ixp4xx in the future to support both, but it does not work in LE mode at the moment. For the ARMv6/v7 platforms, there are two ways this could be handled a) allow both modes only for platforms selecting 'ARCH_SUPPORTS_BIG_ENDIAN' today, but only LE mode for the others, given that these were added intentionally at some point. b) allow both modes everwhere, given that it was already possible to build that way by e.g. selecting ARCH_VIRT, and that the list is not an accurate reflection of which platforms may or may not work. Out of these, I picked b) because it seemed slighly more logical to me. Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2022-03-17ARM: remove support for NOMMU ARMv4/v5Arnd Bergmann1-1/+0
It is possible to build MMU-less kernels for Cortex-M base microcrontrollers as well as a couple of older platforms that have not been converted to CONFIG_ARCH_MULTIPLATFORM, specifically ep93xx, footbridge, dove, sa1100 and s3c24xx. It seems unlikely that anybody has tested those configurations in recent years, as even building them is frequently broken. A patch I submitted caused another build time regression in this configuration. I sent a patch for that, but it seems better to also remove the option entirely, leaving ARMv7-M as the only supported Arm NOMMU target for simplicity. A couple of platforms have dependencies on CONFIG_MMU, those can all be removed now. Notably, mach-integrator tries to support MMU-less CPU cores, but those have not actually been selectable for a long time. This addresses several build failures in randconfig builds that have accumulated over the years. Cc: Vladimir Murzin <vladimir.murzin@arm.com> Cc: Russell King <linux@armlinux.org.uk> Acked-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Reviewed by: Ard Biesheuvel <ardb@kernel.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2019-08-13ARM: mach-nspire: Kill off CLCD auxdataLinus Walleij4-150/+0
After transitioning the CLCD to use DRM we can now kill off the final piece of auxdata on the NSPIRE. Link: https://lore.kernel.org/r/20190810075023.7327-1-linus.walleij@linaro.org Cc: Daniel Tang <dt.tangr@gmail.com> Cc: Fabian Vogt <fabian@ritter-vogt.de> Tested-by: Fabian Vogt <fabian@ritter-vogt.de> Acked-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2019-06-19treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 500Thomas Gleixner4-20/+4
Based on 2 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license version 2 as published by the free software foundation this program is free software you can redistribute it and or modify it under the terms of the gnu general public license version 2 as published by the free software foundation # extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 4122 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Enrico Weigelt <info@metux.net> Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Allison Randal <allison@lohutok.net> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190604081206.933168790@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-21treewide: Add SPDX license identifier - Makefile/KconfigThomas Gleixner2-0/+2
Add SPDX license identifiers to all Make/Kconfig files which: - Have no license information of any form These files fall under the project license, GPL v2 only. The resulting SPDX license identifier is: GPL-2.0-only Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-03-07ARM: nspire: Remove unneeded nspire_map_io()Geert Uytterhoeven1-6/+0
nspire_map_io() just calls debug_ll_io_init(). If machine_desc.map_io is not set, devicemaps_init() in the common ARM code will call debug_ll_io_init(), so nspire_map_io() and the initialization of .map_io can be removed. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Vladimir Murzin <vladimir.murzin@arm.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2016-07-30Merge tag 'devicetree-for-4.8' of ↵Linus Torvalds1-2/+1
git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux Pull DeviceTree updates from Rob Herring: - remove most of_platform_populate() calls in arch code. Now the DT core code calls it in the default case and platforms only need to call it if they have special needs - use pr_fmt on all the DT core print statements - CoreSight binding doc improvements to block name descriptions - add dt_to_config script which can parse dts files and list corresponding kernel config options - fix memory leak hit with a PowerMac DT - correct a bunch of STMicro compatible strings to use the correct vendor prefix - fix DA9052 PMIC binding doc to match what is actually used in dts files * tag 'devicetree-for-4.8' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (35 commits) documentation: da9052: Update regulator bindings names to match DA9052/53 DTS expectations xtensa: Partially Revert "xtensa: Remove unnecessary of_platform_populate with default match table" xtensa: Fix build error due to missing include file MIPS: ath79: Add missing include file Fix spelling errors in Documentation/devicetree ARM: dts: fix STMicroelectronics compatible strings powerpc/dts: fix STMicroelectronics compatible strings Documentation: dt: i2c: use correct STMicroelectronics vendor prefix scripts/dtc: dt_to_config - kernel config options for a devicetree of: fdt: mark unflattened tree as detached of: overlay: add resolver error prints coresight: document binding acronyms Documentation/devicetree: document cavium-pip rx-delay/tx-delay properties of: use pr_fmt prefix for all console printing of/irq: Mark initialised interrupt controllers as populated of: fix memory leak related to safe_name() Revert "of/platform: export of_default_bus_match_table" of: unittest: use of_platform_default_populate() to populate default bus memory: omap-gpmc: use of_platform_default_populate() to populate default bus bus: uniphier-system-bus: use of_platform_default_populate() to populate default bus ...
2016-06-28clocksource/drivers/nspire: Add the COMPILE_TEST optionDaniel Lezcano1-0/+1
Change the Kconfig option logic to fullfil with the current approach. A new Kconfig option is added, CONFIG_NSPIRE_TIMER and is selected by the platform. Then the clocksource's Kconfig is changed to make this option selectable by the user if the COMPILE_TEST option is set. Otherwise, it is up to the platform's Kconfig to select the timer. Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2016-06-23arm: use of_platform_default_populate() to populateKefeng Wang1-2/+1
Use helper of_platform_default_populate() in linux/of_platform when possible, instead of calling of_platform_populate() with the default match table. Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Cc: Nicolas Ferre <nicolas.ferre@atmel.com> Cc: Krzysztof Halasa <khalasa@piap.pl> Cc: Sekhar Nori <nsekhar@ti.com> Cc: Shawn Guo <shawnguo@kernel.org> Cc: Russell King <linux@arm.linux.org.uk> Cc: Roland Stigge <stigge@antcom.de> Cc: Jason Cooper <jason@lakedaemon.net> Cc: Ray Jui <rjui@broadcom.com> Cc: Viresh Kumar <vireshk@kernel.org> Cc: Stephen Warren <swarren@wwwdotorg.org> Cc: Rob Herring <robh@kernel.org> Cc: Michal Simek <michal.simek@xilinx.com> Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com> Signed-off-by: Rob Herring <robh@kernel.org>
2016-03-21Merge tag 'armsoc-cleanup' of ↵Linus Torvalds1-0/+0
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC cleanups from Arnd Bergmann: "A few simple cleanups across multiple platforms, not much standing out: - lpc32xx removes its private implementation of the clk API, after generic code was merged in 4.5 - all unused Makefile.boot files get removed - a number of simplifications for shmobile - asm/clkdev.h gets replaced with the asm-generic version after all mach/clkdev.h implementations are gone" * tag 'armsoc-cleanup' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: ARM: shmobile: Kconfig: Get rid of old comment ARM: shmobile: Consolidate SCU mapping code arm: lpc32xx: remove direct control of GPIOs from shared mach file arm: lpc32xx: remove selected HAVE_IDE arm: lpc32xx: switch to common clock framework ARM: Use generic clkdev.h header ARM: plat-versatile: Remove unused clock.c file ARM: netx: remove redundant "depends on ARCH_NETX" ARM: integrator: remove redundant select in Kconfig ARM: drop unused Makefile.boot of Multiplatform SoCs ARM: mvebu: add missing of_node_put() ARM: shmobile: r8a7779: Remove remainings of removed SCU boot setup code ARM: shmobile: Typo s/MIPDR/MPIDR/ ARM: shmobile: Add includes providing forward declarations ARM: shmobile: rcar-gen2: Make rcar_gen2_dma_contiguous static ARM: mv78xx0: use "depends on" instead of "if" after prompt
2016-03-09dma, mm/pat: Rename dma_*_writecombine() to dma_*_wc()Luis R. Rodriguez1-7/+6
Rename dma_*_writecombine() to dma_*_wc(), so that the naming is coherent across the various write-combining APIs. Keep the old names for compatibility for a while, these can be removed at a later time. A guard is left to enable backporting of the rename, and later remove of the old mapping defines seemlessly. Build tested successfully with allmodconfig. The following Coccinelle SmPL patch was used for this simple transformation: @ rename_dma_alloc_writecombine @ expression dev, size, dma_addr, gfp; @@ -dma_alloc_writecombine(dev, size, dma_addr, gfp) +dma_alloc_wc(dev, size, dma_addr, gfp) @ rename_dma_free_writecombine @ expression dev, size, cpu_addr, dma_addr; @@ -dma_free_writecombine(dev, size, cpu_addr, dma_addr) +dma_free_wc(dev, size, cpu_addr, dma_addr) @ rename_dma_mmap_writecombine @ expression dev, vma, cpu_addr, dma_addr, size; @@ -dma_mmap_writecombine(dev, vma, cpu_addr, dma_addr, size) +dma_mmap_wc(dev, vma, cpu_addr, dma_addr, size) We also keep the old names as compatibility helpers, and guard against their definition to make backporting easier. Generated-by: Coccinelle SmPL Suggested-by: Ingo Molnar <mingo@kernel.org> Signed-off-by: Luis R. Rodriguez <mcgrof@suse.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: airlied@linux.ie Cc: akpm@linux-foundation.org Cc: benh@kernel.crashing.org Cc: bhelgaas@google.com Cc: bp@suse.de Cc: dan.j.williams@intel.com Cc: daniel.vetter@ffwll.ch Cc: dhowells@redhat.com Cc: julia.lawall@lip6.fr Cc: konrad.wilk@oracle.com Cc: linux-fbdev@vger.kernel.org Cc: linux-pci@vger.kernel.org Cc: luto@amacapital.net Cc: mst@redhat.com Cc: tomi.valkeinen@ti.com Cc: toshi.kani@hp.com Cc: vinod.koul@intel.com Cc: xen-devel@lists.xensource.com Link: http://lkml.kernel.org/r/1453516462-4844-1-git-send-email-mcgrof@do-not-panic.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-02-09ARM: drop unused Makefile.boot of Multiplatform SoCsMasahiro Yamada1-0/+0
The variable "MACHINE" is empty if CONFIG_ARCH_MULTIPLATFORM=y, so these Makefile.boot files are never included. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Acked-by: Michal Simek <michal.simek@xilinx.com> (for Zynq) Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2015-06-02ARM: 8366/1: move Dual-Timer SP804 driver to drivers/clocksourceSudeep Holla1-2/+0
The ARM Dual-Timer SP804 module is peripheral found not only on ARM32 platforms but also on ARM64 platforms. This patch moves the driver out of arch/arm to driver/clocksource so that it can be used on ARM64 platforms also. Cc: Daniel Lezcano <daniel.lezcano@linaro.org> Cc: Rob Herring <robh@kernel.org> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Olof Johansson <olof@lixom.net> Acked-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Sudeep Holla <sudeep.holla@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2015-02-19ARM: make arrays containing machine compatible strings constUwe Kleine-König1-1/+1
The definition static const char *axxia_dt_match[] __initconst = { ... defines a changable array of constant strings. That is you must not do: *axxia_dt_match[0] = 'k'; but axxia_dt_match[0] = "different string"; is fine. So the annotation __initconst is wrong and yields a compiler error when other really const variables are added with __initconst. As the struct machine_desc member dt_compat is declared as const char *const *dt_compat; making the arrays const is the better alternative over changing all annotations to __initdata. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2014-04-06Merge tag 'cleanup-3.15' of ↵Linus Torvalds1-5/+0
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC cleanups from Arnd Bergmann: "These cleanup patches are mainly move stuff around and should all be harmless. They are mainly split out so that other branches can be based on top to avoid conflicts. Notable changes are: - We finally remove all mach/timex.h, after CLOCK_TICK_RATE is no longer used (Uwe Kleine-König) - The Qualcomm MSM platform is split out into legacy mach-msm and new-style mach-qcom, to allow easier maintainance of the new hardware support without regressions (Kumar Gala) - A rework of some of the Kconfig logic to simplify multiplatform support (Rob Herring) - Samsung Exynos gets closer to supporting multiplatform (Sachin Kamat and others) - mach-bcm3528 gets merged into mach-bcm (Stephen Warren) - at91 gains some common clock framework support (Alexandre Belloni, Jean-Jacques Hiblot and other French people)" * tag 'cleanup-3.15' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (89 commits) ARM: hisi: select HAVE_ARM_SCU only for SMP ARM: efm32: allow uncompress debug output ARM: prima2: build reset code standalone ARM: at91: add PWM clock ARM: at91: move sam9261 SoC to common clk ARM: at91: prepare common clk transition for sam9261 SoC ARM: at91: updated the at91_dt_defconfig with support for the ADS7846 ARM: at91: dt: sam9261: Device Tree support for the at91sam9261ek ARM: at91: dt: defconfig: Added the sam9261 to the list of DT-enabled SOCs ARM: at91: dt: Add at91sam9261 dt SoC support ARM: at91: switch sam9rl to common clock framework ARM: at91/dt: define main clk frequency of at91sam9rlek ARM: at91/dt: define at91sam9rl clocks ARM: at91: prepare common clk transition for sam9rl SoCs ARM: at91: prepare sam9 dt boards transition to common clk ARM: at91: dt: sam9rl: Device Tree for the at91sam9rlek ARM: at91/defconfig: Add the sam9rl to the list of DT-enabled SOCs ARM: at91: Add at91sam9rl DT SoC support ARM: at91: prepare at91sam9rl DT transition ARM: at91/defconfig: refresh at91sam9260_9g20_defconfig ...
2014-03-27ARM: nspire: Fix compiler warningAlexander Shiyan1-1/+1
CC arch/arm/mach-nspire/nspire.o arch/arm/mach-nspire/nspire.c:79:2: warning: initialization from incompatible pointer type [enabled by default] arch/arm/mach-nspire/nspire.c:79:2: warning: (near initialization for '__mach_desc_NSPIRE.restart') [enabled by default] Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2014-02-20ARM: centralize common multi-platform kconfig optionsRob Herring1-5/+0
Multi-platform requires various kconfig options to be selected, so platforms don't need to select them individually. Signed-off-by: Rob Herring <robh@kernel.org> Acked-by: Linus Walleij <linus.walleij@linaro.org> Cc: Russell King <linux@arm.linux.org.uk> Acked-by: Stephen Warren <swarren@nvidia.com> Tested-by: Stephen Warren <swarren@wwwdotorg.org> Acked-by: Arnd Bergmann <arnd@arndb.de>
2013-09-29ARM: nspire: remove custom .init_time hookSebastian Hesselbarth1-9/+0
With arch/arm calling of_clk_init(NULL) from time_init(), we can now remove custom .init_time hooks. Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
2013-06-21arm: Add Initial TI-Nspire supportDaniel Tang7-0/+260
This patch adds support for the TI-Nspire platform. Changes between v1 and v2: * Added GENERIC_IRQ_CHIP to platform Kconfig Signed-off-by: Daniel Tang <dt.tangr@gmail.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>