summaryrefslogtreecommitdiff
path: root/arch/arm/mach-omap2/dma.c
AgeCommit message (Collapse)AuthorFilesLines
2019-06-19treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 500Thomas Gleixner1-4/+1
Based on 2 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license version 2 as published by the free software foundation this program is free software you can redistribute it and or modify it under the terms of the gnu general public license version 2 as published by the free software foundation # extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 4122 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Enrico Weigelt <info@metux.net> Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Allison Randal <allison@lohutok.net> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190604081206.933168790@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-10-02ARM: OMAP2+: make omap_dma_dev_info __initdataBhumika Goyal1-1/+1
Make this __initdata as it is only modified only during the initialisation phase in the function omap2_system_dma_init_dev and after this it is not referenced anywhere in the kernel. Signed-off-by: Bhumika Goyal <bhumirks@gmail.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2017-08-10ARM: OMAP2+: Remove unused legacy code for DMATony Lindgren1-143/+5
We are now booting all mach-omap2 in device tree only mode. Any code that is only called in legacy boot mode where of_have_populated_dt() is not set is safe to remove now. Let's leave the dummy omap2_system_dma_init_dev() check in place for now to avoid a pointless merge conflict with tusb6010 dmaengine conversion as pointed out by Peter Ujfalusi <peter.ujfalusi@ti.com>. Signed-off-by: Tony Lindgren <tony@atomide.com>
2017-06-20ARM: OMAP2+: DMA: Add slave map entries for 24xx external request linesPeter Ujfalusi1-0/+24
The external request lines are used by tusb6010 on OMAP24xx platforms. Update the map so the driver can use dmaengine API to request the DMA channel. At the same time add temporary map containing only the external DMA request numbers for DT booted case on omap24xx since the tusb6010 stack is not yet supports DT boot. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Bin Liu <b-liu@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-02-22ARM: OMAP2+: DMA: Provide dma_slave_map to omap-dma for legacy bootPeter Ujfalusi1-0/+117
We still have some boards booting in legacy mode and they will need to have the device/slave -> filter_fn mapping so we can convert the OMAP drivers to use the new dmaengine API for requesting channels. Only some OMAP24xx and OMAP3xxx boards can boot in legacy mode which means we only need to provide the map for these SoCs. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2015-06-02ARM: OMAP2+: Remove unnessary return statement from the void function, ↵Nicholas Krause1-1/+0
omap2_show_dma_caps This removes the no longer required return statement at the end of the void function, omap2_show_dma_cap due to no need for a return statement due to this function always running successfully. Signed-off-by: Nicholas Krause <xerofoify@gmail.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2014-07-22ARM: OMAP2+: DMA: remove requirement of irq for platform-dma driverNishanth Menon1-0/+3
we have currently 2 DMA drivers that try to co-exist. drivers/dma/omap-dma.c which registers it's own IRQ and is device tree aware and uses arch/arm/plat-omap/dma.c instance created by arch/arm/mach-omap2/dma.c to maintain channel usage (omap_request_dma). Currently both try to register interrupts and mach-omap2/plat-omap dma.c attempts to use the IRQ number registered by hwmod to register it's own interrupt handler. Now, there is no reasonable way of static allocating DMA irq in GIC SPI when we use crossbar. However, since the dma_chan structure is freed as a result of IRQ not being present due to devm allocation, maintaining information of channel by platform code fails at a later point in time when that region of memory is reused. So, if hwmod does not indicate an IRQ number, then, assume that dma-engine will take care of the interrupt handling. Signed-off-by: Nishanth Menon <nm@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2014-05-08ARM: OMAP2+: raw read and write endian fixVictor Kamensky1-2/+2
All OMAP IP blocks expect LE data, but CPU may operate in BE mode. Need to use endian neutral functions to read/write h/w registers. I.e instead of __raw_read[lw] and __raw_write[lw] functions code need to use read[lw]_relaxed and write[lw]_relaxed functions. If the first simply reads/writes register, the second will byteswap it if host operates in BE mode. Changes are trivial sed like replacement of __raw_xxx functions with xxx_relaxed variant. Signed-off-by: Victor Kamensky <victor.kamensky@linaro.org> Signed-off-by: Taras Kondratiuk <taras.kondratiuk@linaro.org> Signed-off-by: Tony Lindgren <tony@atomide.com>
2014-04-04dmaengine: omap-dma: move register read/writes into omap-dma.cRussell King1-6/+12
Export the DMA register information from the SoC specific data, such that we can access the registers directly in omap-dma.c, mapping the register region ourselves as well. Rather than calculating the DMA channel register in its entirety for each access, we pre-calculate an offset base address for the allocated DMA channel and then just use the appropriate register offset. Acked-by: Tony Lindgren <tony@atomide.com> Acked-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2014-04-04ARM: omap: dma: get rid of 'p' allocation and clean upRussell King1-21/+13
The omap_system_dma_plat_info structure is only seven words, it's not worth the expense of kmalloc()'ing backing store for this only to release it later. Note that platform_device_add_data() copies the data anyway. Clean up the initialisation of this structure - we don't even need code to initialise most of this structure. Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2014-04-04ARM: omap: move dma channel allocation into plat-omap codeRussell King1-7/+0
This really needs to be there, because otherwise the plat-omap code can kfree() this data structure, and then re-use the pointer later. Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2014-04-04ARM: omap: dma: get rid of errata globalRussell King1-3/+2
There's no need for this to be a global variable; move it into the errata configuration function instead. Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2014-04-04ARM: omap: clean up DMA register accessesRussell King1-51/+48
We can do much better with this by using a structure to describe each register, rather than code. Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2014-04-04ARM: omap: remove almost-const variablesRussell King1-9/+5
dma_stride and dma_common_ch_start are only ever initialised to one known value at initialisation, and are private to each of these files. There's no point these being variables at all. Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2014-04-04ARM: omap: remove references to disable_irq_lchRussell King1-10/+0
The disable_irq_lch method is never actually used, so there's not much point it existing; remove it. Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-04-15dmaengine: OMAP: Register SDMA controller with Device Tree DMA driverJon Hunter1-0/+4
If the device-tree blob is present during boot, then register the SDMA controller with the device-tree DMA driver so that we can use device-tree to look-up DMA client information. Signed-off-by: Jon Hunter <jon-hunter@ti.com> Reviewed-by: Felipe Balbi <balbi@ti.com> Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2013-02-22Merge tag 'soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-socLinus Torvalds1-1/+1
Pull ARM SoC-specific updates from Arnd Bergmann: "This is a larger set of new functionality for the existing SoC families, including: - vt8500 gains support for new CPU cores, notably the Cortex-A9 based wm8850 - prima2 gains support for the "marco" SoC family, its SMP based cousin - tegra gains support for the new Tegra4 (Tegra114) family - socfpga now supports a newer version of the hardware including SMP - i.mx31 and bcm2835 are now using DT probing for their clocks - lots of updates for sh-mobile - OMAP updates for clocks, power management and USB - i.mx6q and tegra now support cpuidle - kirkwood now supports PCIe hot plugging - tegra clock support is updated - tegra USB PHY probing gets implemented diffently" * tag 'soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (148 commits) ARM: prima2: remove duplicate v7_invalidate_l1 ARM: shmobile: r8a7779: Correct TMU clock support again ARM: prima2: fix __init section for cpu hotplug ARM: OMAP: Consolidate OMAP USB-HS platform data (part 3/3) ARM: OMAP: Consolidate OMAP USB-HS platform data (part 1/3) arm: socfpga: Add SMP support for actual socfpga harware arm: Add v7_invalidate_l1 to cache-v7.S arm: socfpga: Add entries to enable make dtbs socfpga arm: socfpga: Add new device tree source for actual socfpga HW ARM: tegra: sort Kconfig selects for Tegra114 ARM: tegra: enable ARCH_REQUIRE_GPIOLIB for Tegra114 ARM: tegra: Fix build error w/ ARCH_TEGRA_114_SOC w/o ARCH_TEGRA_3x_SOC ARM: tegra: Fix build error for gic update ARM: tegra: remove empty tegra_smp_init_cpus() ARM: shmobile: Register ARM architected timer ARM: MARCO: fix the build issue due to gic-vic-to-irqchip move ARM: shmobile: r8a7779: Correct TMU clock support ARM: mxs_defconfig: Select CONFIG_DEVTMPFS_MOUNT ARM: mxs: decrease mxs_clockevent_device.min_delta_ns to 2 clock cycles ARM: mxs: use apbx bus clock to drive the timers on timrotv2 ...
2013-01-26ARM: OMAP2+: omap_device: remove obsolete pm_lats and early_device codePaul Walmsley1-1/+1
Remove now-obsolete code from arch/arm/mach-omap2/omap_device.c. This mostly consists of removing the first attempt at device PM latency handling. This was never really used, has been replaced by the common dev_pm_qos code, and needs to go away as part of the DT conversion. Also, the early platform_device creation code has been removed, as it appears to be unused. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Kevin Hilman <khilman@deeprootsystems.com>
2013-01-11ARM: OMAP: Fix dmaengine init for multiplatformTony Lindgren1-2/+19
Otherwise omap dmaengine will initialized when booted on other SoCs. Fix this by initializing the platform device in arch/arm/*omap*/dma.c instead. Cc: Russell King <linux@arm.linux.org.uk> Cc: Dan Williams <djbw@fb.com> Cc: Vinod Koul <vinod.koul@intel.com> Tested-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2013-01-11ARM: OMAP2+: Use omap initcallsTony Lindgren1-1/+1
This way the initcalls don't run on other SoCs on multiplatform kernels. Otherwise we'll get something like this when booting on vexpress: omap_hwmod: _ensure_mpu_hwmod_is_setup: MPU initiator hwmod mpu not yet registered ... WARNING: at arch/arm/mach-omap2/pm.c:82 _init_omap_device+0x74/0x94() _init_omap_device: could not find omap_hwmod for mpu ... omap-dma-engine omap-dma-engine: OMAP DMA engine driver ... Tested-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2012-11-30ARM: OMAP: Move plat-omap/dma-omap.h to include/linux/omap-dma.hTony Lindgren1-1/+1
Based on earlier discussions[1] we attempted to find a suitable location for the omap DMA header in commit 2b6c4e73 (ARM: OMAP: DMA: Move plat/dma.h to plat-omap/dma-omap.h) until the conversion to dmaengine is complete. Unfortunately that was before I was able to try to test compile of the ARM multiplatform builds for omap2+, and the end result was not very good. So I'm creating yet another all over the place patch to cut the last dependency for building omap2+ for ARM multiplatform. After this, we have finally removed the driver dependencies to the arch/arm code, except for few drivers that are being worked on. The other option was to make the <plat-omap/dma-omap.h> path to work, but we'd have to add some new header directory to for multiplatform builds. Or we would have to manually include arch/arm/plat-omap/include again from arch/arm/Makefile for omap2+. Neither of these alternatives sound appealing as they will likely lead addition of various other headers exposed to the drivers, which we want to avoid for the multiplatform kernels. Since we already have a minimal include/linux/omap-dma.h, let's just use that instead and add a note to it to not use the custom omap DMA functions any longer where possible. Note that converting omap DMA to dmaengine depends on dmaengine supporting automatically incrementing the FIFO address at the device end, and converting all the remaining legacy drivers. So it's going to be few more merge windows. [1] https://patchwork.kernel.org/patch/1519591/# cc: Russell King <linux@arm.linux.org.uk> cc: Kevin Hilman <khilman@ti.com> cc: "Benoît Cousson" <b-cousson@ti.com> cc: Herbert Xu <herbert@gondor.apana.org.au> cc: "David S. Miller" <davem@davemloft.net> cc: Vinod Koul <vinod.koul@intel.com> cc: Dan Williams <djbw@fb.com> cc: Mauro Carvalho Chehab <mchehab@infradead.org> cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> cc: Guennadi Liakhovetski <g.liakhovetski@gmx.de> cc: David Woodhouse <dwmw2@infradead.org> cc: Kyungmin Park <kyungmin.park@samsung.com> cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> cc: Tomi Valkeinen <tomi.valkeinen@ti.com> cc: Florian Tobias Schandinat <FlorianSchandinat@gmx.de> cc: Hans Verkuil <hans.verkuil@cisco.com> cc: Vaibhav Hiremath <hvaibhav@ti.com> cc: Lokesh Vutla <lokeshvutla@ti.com> cc: Rusty Russell <rusty@rustcorp.com.au> cc: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> cc: Afzal Mohammed <afzal@ti.com> cc: linux-crypto@vger.kernel.org cc: linux-media@vger.kernel.org cc: linux-mtd@lists.infradead.org cc: linux-usb@vger.kernel.org cc: linux-fbdev@vger.kernel.org Acked-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2012-11-01ARM: OMAP: Remove cpu_is_omap usage from plat-omap/dma.cTony Lindgren1-0/+3
This code will be eventually in drivers, and for the code in the drivers we don't want to have any cpu_is_omap usage. Those macros should be private to arch/arm/mach-omap1 and arch/arm/mach-omap2. To fix this, let's move the define for dma_omap2plus() to dma-omap.h, and use the existing dma_attr passed in the platform_data as the revision registers are what they are. Note that we can now also remove the relative includes introduced by the recent clean-up patches. Cc: Russell King <linux@arm.linux.org.uk> Cc: Vinod Koul <vinod.koul@intel.com> Cc: Lokesh Vutla <lokeshvutla@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2012-10-19ARM: OMAP: Split plat/cpu.h into local soc.h for mach-omap1 and mach-omap2Tony Lindgren1-0/+1
We want to remove plat/cpu.h. To do this, let's first split it to private soc.h to mach-omap1 and mach-omap2. We have to keep plat/cpu.h around until the remaining drivers are fixed, so let's include the local soc.h in plat/cpu.h and for drivers still including plat/cpu.h. Once the drivers are fixed not to include plat/cpu.h, we can remove the file. This is needed for the ARM common zImage support. [tony@atomide.com: updated to not print a warning] Signed-off-by: Tony Lindgren <tony@atomide.com>
2012-10-19ARM: OMAP: Make plat/omap_hwmod.h local to mach-omap2Tony Lindgren1-1/+1
Let's make omap_hwmod local to mach-omap2 for ARM common zImage support. Signed-off-by: Tony Lindgren <tony@atomide.com>
2012-10-17ARM: OMAP: Make omap_device local to mach-omap2Tony Lindgren1-1/+2
Let's make omap_device local to mach-omap2 for ARM common zImage support. Signed-off-by: Tony Lindgren <tony@atomide.com>
2012-10-16ARM: OMAP: DMA: Move plat/dma.h to plat-omap/dma-omap.hLokesh Vutla1-1/+1
Move plat/dma.h to plat-omap/dma-omap.h as part of single zImage work Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2012-05-08ARM: OMAP2+: dma: Define dma capabilities register bitfields and use them.R Sricharan1-4/+7
The system dma module has capabiities register indicating the support for descriptor loading, constant fill, etc. Use this instead of OMAP revision check to identify the features supported runtime. This avoids patching the code for feature SOCs which has those capabilities. Signed-off-by: R Sricharan <r.sricharan@ti.com> Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
2012-02-29OMAP4: dma: Correct CPU version check for dma_common_ch_endPeter Ujfalusi1-1/+1
CCDN is the last common channel register in all OMAP4 versions. Use cpu_is_omap44xx() instead of the cpu_is_omap4430(). cpu_is_omap4430() returns 0 unconditionally. This causes that the dma_common_ch_end register variable is not configured correctly on OMAP4, not even for OMAP4430. Because of this, registers between CCFN - CCDN will be not cleard in the omap2_clear_dma function in OMAP4. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2011-10-04ARM: OMAP2+: devices: Remove all omap_device_pm_latency structuresBenoit Cousson1-10/+1
Remove all these duplicated structures since a default one is now available. Signed-off-by: Benoit Cousson <b-cousson@ti.com> Signed-off-by: Kevin Hilman <khilman@ti.com>
2011-09-16OMAP: omap_device: when building return platform_device instead of omap_deviceKevin Hilman1-8/+8
All of the device init and device driver interaction with omap_device is done using platform_device pointers. To make this more explicit, have omap_device return a platform_device pointer instead of an omap_device pointer. All current users of the omap_device pointer were only using it to get at the platform_device pointer or struct device pointer, so fixing all of the users was trivial. This also makes it more difficult for device init code to directly access members of struct omap_device, and allows for easier changing of omap_device internals. Cc: Paul Walmsley <paul@pwsan.com> Signed-off-by: Kevin Hilman <khilman@ti.com>
2011-03-31Fix common misspellingsLucas De Marchi1-1/+1
Fixes generated by 'codespell' and manually reviewed. Signed-off-by: Lucas De Marchi <lucas.demarchi@profusion.mobi>
2011-01-28arch/arm/mach-omap2/dma.c: Convert IS_ERR result to PTR_ERRJulia Lawall1-1/+1
This code elsewhere returns a negative constant to an indicate an error, while IS_ERR returns the result of a >= operation. The semantic patch that fixes this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> @@ expression x; @@ if (...) { ... - return IS_ERR(x); + return PTR_ERR(x); } // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> Acked-by: Jarkko Nikula <jhnikula@gmail.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-12-21OMAP: DMA: Convert DMA library into platform driverG, Manjunath Kondaiah1-0/+223
Convert DMA library into DMA platform driver and make use of platform data provided by hwmod data base for OMAP2+ onwards. For OMAP1 processors, the DMA driver in mach-omap uses resource structures for getting platform data. Thanks to Tony Lindgren <tony@atomide.com> for fixing various omap1 issues and testing the same on OSK5912 board. Signed-off-by: G, Manjunath Kondaiah <manjugk@ti.com> Tested-by: Kevin Hilman <khilman@deeprootsystems.com> Acked-by: Kevin Hilman <khilman@deeprootsystems.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-12-21OMAP2+: DMA: hwmod: Device registrationG, Manjunath Kondaiah1-0/+74
Prepare OMAP2+ DMA to use hwmod infrastructure so that DMA can register as platform device. Signed-off-by: G, Manjunath Kondaiah <manjugk@ti.com> Tested-by: Kevin Hilman <khilman@deeprootsystems.com> Acked-by: Kevin Hilman <khilman@deeprootsystems.com> Signed-off-by: Tony Lindgren <tony@atomide.com>